Makefile.inc1 revision 116005
1# 2# $FreeBSD: head/Makefile.inc1 116005 2003-06-08 04:15:05Z imp $ 3# 4# Make command line options: 5# -DNO_KERBEROS Do not build Heimdal (Kerberos 5) 6# -DNOCLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir 7# -DNOCLEAN do not clean at all 8# -DNOCRYPT will prevent building of crypt versions 9# -DNOMAN do not build the manual pages 10# -DNOPROFILE do not build profiled libraries 11# -DNOGAMES do not go into games subdir 12# -DNOSHARE do not go into share subdir 13# -DNOINFO do not make or install info files 14# -DNOLIBC_R do not build libc_r. 15# -DNO_FORTRAN do not build g77 and related libraries. 16# -DNO_KERNELCONFIG do not run config in ${MAKE} buildkernel 17# -DNO_KERNELCLEAN do not run ${MAKE} clean in ${MAKE} buildkernel 18# -DNO_KERNELDEPEND do not run ${MAKE} depend in ${MAKE} buildkernel 19# -DNO_PORTSUPDATE do not update ports in ${MAKE} update 20# -DNO_DOCUPDATE do not update doc in ${MAKE} update 21# LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list 22# TARGET_ARCH="arch" to crossbuild world to a different arch 23 24# 25# The intended user-driven targets are: 26# buildworld - rebuild *everything*, including glue to help do upgrades 27# installworld- install everything built by "buildworld" 28# update - convenient way to update your source tree (eg: sup/cvs) 29# most - build user commands, no libraries or include files 30# installmost - install user commands, no libraries or include files 31# 32# Standard targets (not defined here) are documented in the makefiles in 33# /usr/share/mk. These include: 34# obj depend all install clean cleandepend cleanobj 35 36# Put initial settings here. 37SUBDIR= 38 39# We must do share/info early so that installation of info `dir' 40# entries works correctly. Do it first since it is less likely to 41# grow dependencies on include and lib than vice versa. 42.if exists(${.CURDIR}/share/info) 43SUBDIR+= share/info 44.endif 45 46.if exists(${.CURDIR}/include) 47SUBDIR+= include 48.endif 49.if exists(${.CURDIR}/lib) 50SUBDIR+= lib 51.endif 52 53.if exists(${.CURDIR}/bin) 54SUBDIR+= bin 55.endif 56.if exists(${.CURDIR}/games) && !defined(NOGAMES) 57SUBDIR+= games 58.endif 59.if exists(${.CURDIR}/gnu) 60SUBDIR+= gnu 61.endif 62.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \ 63 !defined(NOCRYPT) && !defined(NO_OPENSSL) && !defined(NO_KERBEROS) 64SUBDIR+= kerberos5 65.endif 66.if exists(${.CURDIR}/libexec) 67SUBDIR+= libexec 68.endif 69.if exists(${.CURDIR}/sbin) 70SUBDIR+= sbin 71.endif 72.if exists(${.CURDIR}/secure) && !defined(NOCRYPT) 73SUBDIR+= secure 74.endif 75.if exists(${.CURDIR}/share) && !defined(NOSHARE) 76SUBDIR+= share 77.endif 78.if exists(${.CURDIR}/sys) 79SUBDIR+= sys 80.endif 81.if exists(${.CURDIR}/usr.bin) 82SUBDIR+= usr.bin 83.endif 84.if exists(${.CURDIR}/usr.sbin) 85SUBDIR+= usr.sbin 86.endif 87 88# etc must be last for "distribute" to work 89.if exists(${.CURDIR}/etc) 90SUBDIR+= etc 91.endif 92 93# These are last, since it is nice to at least get the base system 94# rebuilt before you do them. 95.if defined(LOCAL_DIRS) 96.for _DIR in ${LOCAL_DIRS} 97.if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile) 98SUBDIR+= ${_DIR} 99.endif 100.endfor 101.endif 102 103.if defined(SUBDIR_OVERRIDE) 104SUBDIR= ${SUBDIR_OVERRIDE} 105.endif 106 107.if defined(NOCLEANDIR) 108CLEANDIR= clean cleandepend 109.else 110CLEANDIR= cleandir 111.endif 112 113CVS?= cvs 114SUP?= /usr/local/bin/cvsup 115SUPFLAGS?= -g -L 2 -P - 116.if defined(SUPHOST) 117SUPFLAGS+= -h ${SUPHOST} 118.endif 119 120MAKEOBJDIRPREFIX?= /usr/obj 121.if !defined(OSRELDATE) 122OSRELDATE!= awk '/^\#define[[:space:]]*__FreeBSD_version/ { print $$3 }' \ 123 /usr/include/osreldate.h 124.endif 125TARGET_ARCH?= ${MACHINE_ARCH} 126.if ${TARGET_ARCH} == ${MACHINE_ARCH} 127TARGET?= ${MACHINE} 128TARGET_CPUTYPE?=${CPUTYPE} 129.else 130TARGET?= ${TARGET_ARCH} 131TARGET_CPUTYPE?= 132.endif 133.if !empty(TARGET_CPUTYPE) 134_TARGET_CPUTYPE=${TARGET_CPUTYPE} 135.else 136_TARGET_CPUTYPE=dummy 137.endif 138_CPUTYPE!= ${MAKE} -f /dev/null -m ${.CURDIR}/share/mk \ 139 CPUTYPE=${_TARGET_CPUTYPE} -V CPUTYPE 140.if ${_CPUTYPE} != ${_TARGET_CPUTYPE} 141.error CPUTYPE global should be set with ?=. 142.endif 143.if make(buildworld) 144BUILD_ARCH!= sysctl -n hw.machine_arch 145.if ${MACHINE_ARCH} != ${BUILD_ARCH} 146.error To cross-build, set TARGET_ARCH. 147.endif 148.endif 149.if ${MACHINE} == ${TARGET} 150OBJTREE= ${MAKEOBJDIRPREFIX} 151.else 152OBJTREE= ${MAKEOBJDIRPREFIX}/${TARGET} 153.endif 154WORLDTMP= ${OBJTREE}${.CURDIR}/${MACHINE_ARCH} 155# /usr/games added for fortune which depend on strfile 156BPATH= ${WORLDTMP}/legacy/usr/sbin:${WORLDTMP}/legacy/usr/bin:${WORLDTMP}/legacy/usr/games 157XPATH= ${WORLDTMP}/usr/sbin:${WORLDTMP}/usr/bin:${WORLDTMP}/usr/games 158STRICTTMPPATH= ${BPATH}:${XPATH} 159TMPPATH= ${STRICTTMPPATH}:${PATH} 160 161INSTALLTMP!= /usr/bin/mktemp -d -u -t install 162 163# 164# Building a world goes through the following stages 165# 166# 1. legacy stage [BMAKE] 167# This stage is responsible for creating compatibility 168# shims that are needed by the bootstrap-tools, 169# build-tools and cross-tools stages. 170# 1. bootstrap-tools stage [BMAKE] 171# This stage is responsible for creating programs that 172# are needed for backward compatibility reasons. They 173# are not built as cross-tools. 174# 2. build-tools stage [TMAKE] 175# This stage is responsible for creating the object 176# tree and building any tools that are needed during 177# the build process. 178# 3. cross-tools stage [XMAKE] 179# This stage is responsible for creating any tools that 180# are needed for cross-builds. A cross-compiler is one 181# of them. 182# 4. world stage [WMAKE] 183# This stage actually builds the world. 184# 5. install stage (optional) [IMAKE] 185# This stage installs a previously built world. 186# 187 188BOOTSTRAPPING?= 0 189 190# Common environment for world related stages 191CROSSENV= MAKEOBJDIRPREFIX=${OBJTREE} \ 192 MACHINE_ARCH=${TARGET_ARCH} \ 193 MACHINE=${TARGET} \ 194 CPUTYPE=${TARGET_CPUTYPE} \ 195 GROFF_BIN_PATH=${WORLDTMP}/legacy/usr/bin \ 196 GROFF_FONT_PATH=${WORLDTMP}/legacy/usr/share/groff_font \ 197 GROFF_TMAC_PATH=${WORLDTMP}/legacy/usr/share/tmac 198 199# bootstrap-tools stage 200BMAKEENV= DESTDIR= \ 201 INSTALL="sh ${.CURDIR}/tools/install.sh" \ 202 PATH=${BPATH}:${PATH} \ 203 WORLDTMP=${WORLDTMP} \ 204 MAKEFLAGS="-m ${.CURDIR}/tools/build/mk ${.MAKEFLAGS}" 205.if ${BOOTSTRAPPING} < 501100 206BMAKEENV+= CSTD= 207.endif 208BMAKE= MAKEOBJDIRPREFIX=${WORLDTMP} \ 209 ${BMAKEENV} ${MAKE} -f Makefile.inc1 \ 210 BOOTSTRAPPING=${OSRELDATE} \ 211 -DNOHTML -DNOINFO -DNOLINT -DNOMAN -DNOPIC -DNOPROFILE \ 212 -DNOSHARED -DNO_CPU_CFLAGS -DNO_WARNS 213 214# build-tools stage 215TMAKE= MAKEOBJDIRPREFIX=${OBJTREE} \ 216 ${BMAKEENV} ${MAKE} -f Makefile.inc1 \ 217 BOOTSTRAPPING=${OSRELDATE} -DNOLINT -DNO_CPU_CFLAGS -DNO_WARNS 218 219# cross-tools stage 220XMAKE= TOOLS_PREFIX=${WORLDTMP} ${BMAKE} -DNO_FORTRAN -DNO_GDB 221 222# world stage 223WMAKEENV= ${CROSSENV} \ 224 DESTDIR=${WORLDTMP} \ 225 INSTALL="sh ${.CURDIR}/tools/install.sh" \ 226 PATH=${TMPPATH} 227WMAKE= ${WMAKEENV} ${MAKE} -f Makefile.inc1 228 229# install stage 230IMAKEENV= ${CROSSENV} \ 231 PATH=${STRICTTMPPATH}:${INSTALLTMP} 232IMAKE= ${IMAKEENV} ${MAKE} -f Makefile.inc1 233 234# kernel stage 235KMAKEENV= ${WMAKEENV} 236 237# 238# buildworld 239# 240# Attempt to rebuild the entire system, with reasonable chance of 241# success, regardless of how old your existing system is. 242# 243_worldtmp: 244.if ${.CURDIR:C/[^,]//g} != "" 245# The m4 build of sendmail files doesn't like it if ',' is used 246# anywhere in the path of it's files. 247 @echo 248 @echo "*** Error: path to source tree contains a comma ','" 249 @echo 250 @false 251.endif 252 @echo 253 @echo "--------------------------------------------------------------" 254 @echo ">>> Rebuilding the temporary build tree" 255 @echo "--------------------------------------------------------------" 256.if !defined(NOCLEAN) 257 rm -rf ${WORLDTMP} 258.else 259 rm -rf ${WORLDTMP}/legacy/usr/include 260 # XXX - These two can depend on any header file. 261 rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c 262 rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c 263.endif 264.for _dir in \ 265 usr/bin usr/games usr/include/sys usr/lib \ 266 usr/libexec usr/sbin usr/share/dict \ 267 usr/share/groff_font/devX100 \ 268 usr/share/groff_font/devX100-12 \ 269 usr/share/groff_font/devX75 \ 270 usr/share/groff_font/devX75-12 \ 271 usr/share/groff_font/devascii \ 272 usr/share/groff_font/devcp1047 \ 273 usr/share/groff_font/devdvi \ 274 usr/share/groff_font/devhtml \ 275 usr/share/groff_font/devkoi8-r \ 276 usr/share/groff_font/devlatin1 \ 277 usr/share/groff_font/devlbp \ 278 usr/share/groff_font/devlj4 \ 279 usr/share/groff_font/devps \ 280 usr/share/groff_font/devutf8 \ 281 usr/share/tmac/mdoc usr/share/tmac/mm 282 mkdir -p ${WORLDTMP}/legacy/${_dir} 283.endfor 284.for _dir in \ 285 usr/bin usr/include usr/lib/compat/aout usr/libdata/ldscripts \ 286 usr/libexec usr/share/misc 287 mkdir -p ${WORLDTMP}/${_dir} 288.endfor 289 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \ 290 -p ${WORLDTMP}/usr/include 291 ln -sf ${.CURDIR}/sys ${WORLDTMP} 292_legacy: 293 @echo 294 @echo "--------------------------------------------------------------" 295 @echo ">>> stage 1: legacy release compatibility shims" 296 @echo "--------------------------------------------------------------" 297 cd ${.CURDIR}; ${BMAKE} legacy 298_bootstrap-tools: 299 @echo 300 @echo "--------------------------------------------------------------" 301 @echo ">>> stage 1: bootstrap tools" 302 @echo "--------------------------------------------------------------" 303 cd ${.CURDIR}; ${BMAKE} bootstrap-tools 304_cleanobj: 305.if !defined(NOCLEAN) 306 @echo 307 @echo "--------------------------------------------------------------" 308 @echo ">>> stage 2: cleaning up the object tree" 309 @echo "--------------------------------------------------------------" 310 cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/} 311.endif 312_obj: 313 @echo 314 @echo "--------------------------------------------------------------" 315 @echo ">>> stage 2: rebuilding the object tree" 316 @echo "--------------------------------------------------------------" 317 cd ${.CURDIR}; ${WMAKE} par-obj 318_build-tools: 319 @echo 320 @echo "--------------------------------------------------------------" 321 @echo ">>> stage 2: build tools" 322 @echo "--------------------------------------------------------------" 323 cd ${.CURDIR}; ${TMAKE} build-tools 324_cross-tools: 325 @echo 326 @echo "--------------------------------------------------------------" 327 @echo ">>> stage 3: cross tools" 328 @echo "--------------------------------------------------------------" 329 cd ${.CURDIR}; ${XMAKE} cross-tools 330_includes: 331 @echo 332 @echo "--------------------------------------------------------------" 333 @echo ">>> stage 4: populating ${WORLDTMP}/usr/include" 334 @echo "--------------------------------------------------------------" 335 cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes 336_libraries: 337 @echo 338 @echo "--------------------------------------------------------------" 339 @echo ">>> stage 4: building libraries" 340 @echo "--------------------------------------------------------------" 341 cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries 342_depend: 343 @echo 344 @echo "--------------------------------------------------------------" 345 @echo ">>> stage 4: make dependencies" 346 @echo "--------------------------------------------------------------" 347 cd ${.CURDIR}; ${WMAKE} par-depend 348everything: 349 @echo 350 @echo "--------------------------------------------------------------" 351 @echo ">>> stage 4: building everything.." 352 @echo "--------------------------------------------------------------" 353 cd ${.CURDIR}; ${WMAKE} par-all 354 355 356WMAKE_TGTS= 357.if !defined(SUBDIR_OVERRIDE) 358WMAKE_TGTS+= _worldtmp _legacy _bootstrap-tools 359.endif 360WMAKE_TGTS+= _cleanobj _obj _build-tools 361.if !defined(SUBDIR_OVERRIDE) 362WMAKE_TGTS+= _cross-tools 363.endif 364WMAKE_TGTS+= _includes _libraries _depend everything 365 366buildworld: ${WMAKE_TGTS} 367.ORDER: ${WMAKE_TGTS} 368 369# 370# installcheck 371# 372# Checks to be sure system is ready for installworld 373# 374installcheck: 375.if !defined(NO_SENDMAIL) 376 @if ! `grep -q '^smmsp:' /etc/passwd`; then \ 377 echo "ERROR: Required smmsp user is missing, see /usr/src/UPDATING."; \ 378 false; \ 379 fi 380 @if ! `grep -q '^smmsp:' /etc/group`; then \ 381 echo "ERROR: Required smmsp group is missing, see /usr/src/UPDATING."; \ 382 false; \ 383 fi 384.endif 385.if ${TARGET_ARCH} == ${MACHINE_ARCH} && !defined(DISTDIR) && \ 386 (!defined(DESTDIR) || empty(DESTDIR) || ${DESTDIR} == "/") 387 @echo "Checking to see if your booted kernel is fresh enough.." 388 ${.OBJDIR}/bin/sh/sh -c \ 389 'echo "Testing installed kernel for new sigaction(2) syscall"' 390 @echo "Seems ok.." 391.endif 392 393# 394# distributeworld 395# 396# Distributes everything compiled by a `buildworld'. 397# 398# installworld 399# 400# Installs everything compiled by a 'buildworld'. 401# 402distributeworld installworld: installcheck 403 mkdir -p ${INSTALLTMP} 404 for prog in [ awk cap_mkdb cat chflags chmod chown \ 405 date echo egrep find grep \ 406 ln make mkdir mtree mv pwd_mkdb rm sed sh sysctl \ 407 test true uname wc zic; do \ 408 cp `which $$prog` ${INSTALLTMP}; \ 409 done 410 cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//} 411 rm -rf ${INSTALLTMP} 412 413# 414# reinstall 415# 416# If you have a build server, you can NFS mount the source and obj directories 417# and do a 'make reinstall' on the *client* to install new binaries from the 418# most recent server build. 419# 420reinstall: 421 @echo "--------------------------------------------------------------" 422 @echo ">>> Making hierarchy" 423 @echo "--------------------------------------------------------------" 424 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy 425 @echo 426 @echo "--------------------------------------------------------------" 427 @echo ">>> Installing everything.." 428 @echo "--------------------------------------------------------------" 429 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install 430.if !defined(NOMAN) && !defined(NO_MAKEDB_RUN) 431 @echo 432 @echo "--------------------------------------------------------------" 433 @echo ">>> Rebuilding man page indices" 434 @echo "--------------------------------------------------------------" 435 cd ${.CURDIR}/share/man; ${MAKE} makedb 436.endif 437 438redistribute: 439 @echo "--------------------------------------------------------------" 440 @echo ">>> Distributing everything.." 441 @echo "--------------------------------------------------------------" 442 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 distribute 443 444# 445# buildkernel and installkernel 446# 447# Which kernels to build and/or install is specified by setting 448# KERNCONF. If not defined a GENERIC kernel is built/installed. 449# Only the existing (depending TARGET) config files are used 450# for building kernels and only the first of these is designated 451# as the one being installed. 452# 453# Note that we have to use TARGET instead of TARGET_ARCH when 454# we're in kernel-land. Since only TARGET_ARCH is (expected) to 455# be set to cross-build, we have to make sure TARGET is set 456# properly. 457 458.if !defined(KERNCONF) && defined(KERNEL) 459KERNCONF= ${KERNEL} 460KERNWARN= yes 461.else 462KERNCONF?= GENERIC 463.endif 464INSTKERNNAME?= kernel 465 466KERNSRCDIR?= ${.CURDIR}/sys 467KRNLCONFDIR= ${KERNSRCDIR}/${TARGET}/conf 468KRNLOBJDIR= ${OBJTREE}${KERNSRCDIR} 469KERNCONFDIR?= ${KRNLCONFDIR} 470 471BUILDKERNELS= 472INSTALLKERNEL= 473.for _kernel in ${KERNCONF} 474.if exists(${KERNCONFDIR}/${_kernel}) 475BUILDKERNELS+= ${_kernel} 476.if empty(INSTALLKERNEL) 477INSTALLKERNEL= ${_kernel} 478.endif 479.endif 480.endfor 481 482# 483# buildkernel 484# 485# Builds all kernels defined by BUILDKERNELS. 486# 487buildkernel: 488.if empty(BUILDKERNELS) 489 @echo "ERROR: Missing kernel configuration file(s) (${KERNCONF})."; 490 @false 491.endif 492.if defined(KERNWARN) 493 @echo "--------------------------------------------------------------" 494 @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF=" 495 @echo "--------------------------------------------------------------" 496 @sleep 3 497.endif 498 @echo 499.for _kernel in ${BUILDKERNELS} 500 @echo "--------------------------------------------------------------" 501 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`" 502 @echo "--------------------------------------------------------------" 503 @echo "===> ${_kernel}" 504 mkdir -p ${KRNLOBJDIR} 505.if !defined(NO_KERNELCONFIG) 506 cd ${KRNLCONFDIR}; \ 507 PATH=${TMPPATH} \ 508 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \ 509 ${KERNCONFDIR}/${_kernel} 510.endif 511.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) 512 cd ${KRNLOBJDIR}/${_kernel}; \ 513 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} ${CLEANDIR} 514.endif 515 cd ${KRNLOBJDIR}/${_kernel}; \ 516 MAKESRCPATH=${KERNSRCDIR}/dev/aic7xxx/aicasm \ 517 ${MAKE} -DNO_CPU_CFLAGS -f ${KERNSRCDIR}/dev/aic7xxx/aicasm/Makefile 518 cd ${KRNLOBJDIR}/${_kernel}; \ 519 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} obj 520# XXX - Gratuitously builds aicasm in the ``makeoptions NO_MODULES'' case. 521.if !defined(MODULES_WITH_WORLD) && !defined(NO_MODULES) && exists(${KERNSRCDIR}/modules) 522.for target in obj depend all 523 cd ${.CURDIR}/sys/modules/aic7xxx/aicasm; \ 524 MAKEOBJDIRPREFIX=${KRNLOBJDIR}/${_kernel}/modules \ 525 ${MAKE} -DNO_CPU_CFLAGS ${target} 526.endfor 527.endif 528.if !defined(NO_KERNELDEPEND) 529 cd ${KRNLOBJDIR}/${_kernel}; \ 530 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend -DNO_MODULES_OBJ 531.endif 532 cd ${KRNLOBJDIR}/${_kernel}; \ 533 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all -DNO_MODULES_OBJ 534 @echo "--------------------------------------------------------------" 535 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`" 536 @echo "--------------------------------------------------------------" 537.endfor 538 539# 540# installkernel 541# 542# Install the kernel defined by INSTALLKERNEL 543# 544installkernel reinstallkernel: 545.if empty(INSTALLKERNEL) 546 @echo "ERROR: No kernel \"${KERNCONF}\" to install." 547 @false 548.endif 549 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \ 550 ${CROSSENV} PATH=${TMPPATH} \ 551 ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//} 552 553# 554# update 555# 556# Update the source tree, by running sup and/or running cvs to update to the 557# latest copy. 558# 559update: 560.if defined(SUP_UPDATE) 561 @echo "--------------------------------------------------------------" 562 @echo ">>> Running ${SUP}" 563 @echo "--------------------------------------------------------------" 564.if defined(SUPFILE) 565 @${SUP} ${SUPFLAGS} ${SUPFILE} 566.endif 567.if defined(SUPFILE1) 568 @${SUP} ${SUPFLAGS} ${SUPFILE1} 569.endif 570.if defined(SUPFILE2) 571 @${SUP} ${SUPFLAGS} ${SUPFILE2} 572.endif 573.if defined(PORTSSUPFILE) && !defined(NO_PORTSUPDATE) 574 @${SUP} ${SUPFLAGS} ${PORTSSUPFILE} 575.endif 576.if defined(DOCSUPFILE) && !defined(NO_DOCUPDATE) 577 @${SUP} ${SUPFLAGS} ${DOCSUPFILE} 578.endif 579.endif 580.if defined(CVS_UPDATE) 581 @echo "--------------------------------------------------------------" 582 @echo ">>> Updating ${.CURDIR} from cvs repository" ${CVSROOT} 583 @echo "--------------------------------------------------------------" 584 cd ${.CURDIR}; ${CVS} -R -q update -A -P -d 585.endif 586 587# 588# most 589# 590# Build most of the user binaries on the existing system libs and includes. 591# 592most: 593 @echo "--------------------------------------------------------------" 594 @echo ">>> Building programs only" 595 @echo "--------------------------------------------------------------" 596.for _dir in bin sbin libexec usr.bin usr.sbin gnu/usr.bin gnu/usr.sbin 597 cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ all 598.endfor 599 600# 601# installmost 602# 603# Install the binaries built by the 'most' target. This does not include 604# libraries or include files. 605# 606installmost: 607 @echo "--------------------------------------------------------------" 608 @echo ">>> Installing programs only" 609 @echo "--------------------------------------------------------------" 610.for _dir in bin sbin libexec usr.bin usr.sbin gnu/usr.bin gnu/usr.sbin 611 cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ install 612.endfor 613 614# 615# ------------------------------------------------------------------------ 616# 617# From here onwards are utility targets used by the 'make world' and 618# related targets. If your 'world' breaks, you may like to try to fix 619# the problem and manually run the following targets to attempt to 620# complete the build. Beware, this is *not* guaranteed to work, you 621# need to have a pretty good grip on the current state of the system 622# to attempt to manually finish it. If in doubt, 'make world' again. 623# 624 625# 626# legacy: Build compatibility shims for the next three targets 627# 628legacy: 629.for _tool in tools/build 630 @${ECHODIR} "===> ${_tool}"; \ 631 cd ${.CURDIR}/${_tool}; \ 632 ${MAKE} DIRPRFX=${_tool}/ obj; \ 633 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy includes; \ 634 ${MAKE} DIRPRFX=${_tool}/ depend; \ 635 ${MAKE} DIRPRFX=${_tool}/ all; \ 636 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy install 637.endfor 638 639# 640# bootstrap-tools: Build tools needed for compatibility 641# 642.if exists(${.CURDIR}/games) && !defined(NOGAMES) 643_strfile= games/fortune/strfile 644.endif 645 646.if !defined(NO_CXX) 647_gperf= gnu/usr.bin/gperf 648.if ${BOOTSTRAPPING} < 500113 649_groff= gnu/usr.bin/groff 650.else 651_groff= gnu/usr.bin/groff/tmac 652.endif 653.endif 654 655.if ( ${BOOTSTRAPPING} < 450005 || \ 656 ( ${BOOTSTRAPPING} >= 500000 && ${BOOTSTRAPPING} < 500034 )) 657_uudecode= usr.bin/uudecode 658.endif 659 660.if ( ${BOOTSTRAPPING} < 430002 || \ 661 ( ${BOOTSTRAPPING} >= 500000 && ${BOOTSTRAPPING} < 500019 )) 662_xargs= usr.bin/xargs 663.endif 664 665.if ( ${BOOTSTRAPPING} < 430002 || \ 666 ( ${BOOTSTRAPPING} >= 500000 && ${BOOTSTRAPPING} < 500018 )) 667_yacc= usr.bin/yacc 668.endif 669 670.if ${BOOTSTRAPPING} < 500019 671_kbdcontrol= usr.sbin/kbdcontrol 672.endif 673 674bootstrap-tools: 675.for _tool in ${_strfile} usr.bin/colldef \ 676 usr.bin/makewhatis usr.bin/rpcgen ${_uudecode} \ 677 ${_xargs} usr.bin/xinstall ${_yacc} \ 678 usr.sbin/config ${_kbdcontrol} \ 679 ${_gperf} ${_groff} gnu/usr.bin/texinfo 680 @${ECHODIR} "===> ${_tool}"; \ 681 cd ${.CURDIR}/${_tool}; \ 682 ${MAKE} DIRPRFX=${_tool}/ obj; \ 683 ${MAKE} DIRPRFX=${_tool}/ depend; \ 684 ${MAKE} DIRPRFX=${_tool}/ all; \ 685 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy install 686.endfor 687 688# 689# build-tools: Build special purpose build tools 690# 691.if defined(MODULES_WITH_WORLD) && exists(${KERNSRCDIR}/modules) 692_aicasm= sys/modules/aic7xxx/aicasm 693.endif 694 695.if exists(${.CURDIR}/share) && !defined(NOSHARE) 696_share= share/syscons/scrnmaps 697.endif 698 699.if !defined(NO_FORTRAN) 700_fortran= gnu/usr.bin/cc/f771 701.endif 702 703.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \ 704 !defined(NOCRYPT) && !defined(NO_OPENSSL) && !defined(NO_KERBEROS) 705_libkrb5= kerberos5/lib/libroken kerberos5/lib/libvers \ 706 kerberos5/lib/libasn1 kerberos5/lib/libhdb kerberos5/lib/libsl 707.endif 708 709build-tools: 710.for _tool in bin/csh bin/sh gnu/usr.bin/cc/cc_tools ${_fortran} \ 711 ${_libkrb5} lib/libncurses ${_share} \ 712 ${_aicasm} usr.bin/awk usr.bin/file usr.sbin/sysinstall 713 @${ECHODIR} "===> ${_tool}"; \ 714 cd ${.CURDIR}/${_tool}; \ 715 ${MAKE} DIRPRFX=${_tool}/ obj; \ 716 ${MAKE} DIRPRFX=${_tool}/ build-tools 717.endfor 718 719# 720# cross-tools: Build cross-building tools 721# 722.if ${TARGET_ARCH} == "alpha" && ${TARGET_ARCH} != ${MACHINE_ARCH} 723_elf2exe= usr.sbin/elf2exe 724.endif 725 726.if ${TARGET_ARCH} == "i386" && ${TARGET_ARCH} != ${MACHINE_ARCH} 727_btxld= usr.sbin/btxld 728.if defined(RELEASEDIR) 729_kgzip= usr.sbin/kgzip 730.endif 731.endif 732 733.if ${TARGET_ARCH} == "sparc64" && ${TARGET_ARCH} != ${MACHINE_ARCH} && \ 734 ${BOOTSTRAPPING} < 500037 735_elf2aout= usr.bin/elf2aout 736.endif 737 738.if defined(RELEASEDIR) 739_crunchide= usr.sbin/crunch/crunchide 740.endif 741 742_xlint= usr.bin/xlint/lint1 usr.bin/xlint/lint2 usr.bin/xlint/xlint 743 744cross-tools: 745.for _tool in ${_btxld} ${_elf2aout} ${_elf2exe} \ 746 gnu/usr.bin/binutils ${_crunchide} \ 747 gnu/usr.bin/cc ${_xlint} ${_kgzip} 748 @${ECHODIR} "===> ${_tool}"; \ 749 cd ${.CURDIR}/${_tool}; \ 750 ${MAKE} DIRPRFX=${_tool}/ obj; \ 751 ${MAKE} DIRPRFX=${_tool}/ depend; \ 752 ${MAKE} DIRPRFX=${_tool}/ all; \ 753 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX} install 754.endfor 755 756# 757# hierarchy - ensure that all the needed directories are present 758# 759hierarchy: 760 cd ${.CURDIR}/etc; ${MAKE} distrib-dirs 761 762# 763# libraries - build all libraries, and install them under ${DESTDIR}. 764# 765# The list of libraries with dependents (${_prebuild_libs}) and their 766# interdependencies (__L) are built automatically by the 767# ${.CURDIR}/tools/make_libdeps.sh script. 768# 769libraries: 770 cd ${.CURDIR}; \ 771 ${MAKE} -f Makefile.inc1 _startup_libs; \ 772 ${MAKE} -f Makefile.inc1 _prebuild_libs; \ 773 ${MAKE} -f Makefile.inc1 _generic_libs; 774 775# These dependencies are not automatically generated: 776# 777# gnu/lib/csu, gnu/lib/libgcc and lib/csu must be built before all 778# shared libraries for ELF. 779# 780_startup_libs= gnu/lib/csu gnu/lib/libgcc 781.if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH}-elf) 782_startup_libs+= lib/csu/${MACHINE_ARCH}-elf 783.else 784_startup_libs+= lib/csu/${MACHINE_ARCH} 785.endif 786 787_prebuild_libs+= lib/libc 788_generic_libs= gnu/lib 789 790.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \ 791 !defined(NOCRYPT) && !defined(NO_OPENSSL) && !defined(NO_KERBEROS) 792_prebuild_libs+= kerberos5/lib/libasn1 793_prebuild_libs+= kerberos5/lib/libgssapi 794_prebuild_libs+= kerberos5/lib/libkrb5 795_prebuild_libs+= kerberos5/lib/libroken 796_generic_libs+= kerberos5/lib 797.endif 798 799_prebuild_libs+= lib/libcom_err lib/libcrypt lib/libexpat \ 800 lib/libkvm lib/libmd \ 801 lib/libncurses lib/libopie lib/libpam lib/libradius \ 802 lib/librpcsvc \ 803 lib/libsbuf lib/libtacplus lib/libutil lib/libypclnt \ 804 lib/libz lib/msun 805 806lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L 807lib/libypclnt__L: lib/librpcsvc__L 808 809_generic_libs+= lib 810 811.if !defined(NOCRYPT) 812.if !defined(NO_OPENSSL) 813_prebuild_libs+= secure/lib/libcrypto secure/lib/libssl 814.if !defined(NO_OPENSSH) 815_prebuild_libs+= secure/lib/libssh 816secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L 817.endif 818.endif 819_generic_libs+= secure/lib 820.endif 821 822_generic_libs+= usr.bin/lex/lib 823 824.if ${MACHINE_ARCH} == "i386" 825_generic_libs+= usr.sbin/pcvt/keycap 826.endif 827 828.for _lib in ${_startup_libs} ${_prebuild_libs:Nlib/libpam} ${_generic_libs} 829${_lib}__L: .PHONY 830.if exists(${.CURDIR}/${_lib}) 831 @${ECHODIR} "===> ${_lib}"; \ 832 cd ${.CURDIR}/${_lib}; \ 833 ${MAKE} DIRPRFX=${_lib}/ depend; \ 834 ${MAKE} DIRPRFX=${_lib}/ all; \ 835 ${MAKE} DIRPRFX=${_lib}/ install 836.endif 837.endfor 838 839# libpam is special: we need to build static PAM modules before 840# static PAM library, and dynamic PAM library before dynamic PAM 841# modules. 842lib/libpam__L: .PHONY 843 @${ECHODIR} "===> lib/libpam"; \ 844 cd ${.CURDIR}/lib/libpam; \ 845 ${MAKE} DIRPRFX=lib/libpam/ depend; \ 846 ${MAKE} DIRPRFX=lib/libpam/ -D_NO_LIBPAM_SO_YET all; \ 847 ${MAKE} DIRPRFX=lib/libpam/ -D_NO_LIBPAM_SO_YET install 848 849_startup_libs: ${_startup_libs:S/$/__L/} 850_prebuild_libs: ${_prebuild_libs:S/$/__L/} 851_generic_libs: ${_generic_libs:S/$/__L/} 852 853.for __target in all clean cleandepend cleandir depend includes obj 854.for entry in ${SUBDIR} 855${entry}.${__target}__D: .PHONY 856 @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \ 857 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \ 858 edir=${entry}.${MACHINE_ARCH}; \ 859 cd ${.CURDIR}/$${edir}; \ 860 else \ 861 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \ 862 edir=${entry}; \ 863 cd ${.CURDIR}/$${edir}; \ 864 fi; \ 865 ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/ 866.endfor 867par-${__target}: ${SUBDIR:S/$/.${__target}__D/} 868.endfor 869 870.include <bsd.subdir.mk> 871