Makefile.inc1 revision 114719
1# 2# $FreeBSD: head/Makefile.inc1 114719 2003-05-05 08:44:40Z markm $ 3# 4# Make command line options: 5# -DNO_KERBEROS Do not build Heimdal (Kerberos 5) 6# -DNOCLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir 7# -DNOCLEAN do not clean at all 8# -DNOCRYPT will prevent building of crypt versions 9# -DNOMAN do not build the manual pages 10# -DNOPROFILE do not build profiled libraries 11# -DNOSECURE do not go into secure subdir 12# -DNOGAMES do not go into games subdir 13# -DNOSHARE do not go into share subdir 14# -DNOINFO do not make or install info files 15# -DNOLIBC_R do not build libc_r. 16# -DNO_FORTRAN do not build g77 and related libraries. 17# -DNO_KERNELCONFIG do not run config in ${MAKE} buildkernel 18# -DNO_KERNELCLEAN do not run ${MAKE} clean in ${MAKE} buildkernel 19# -DNO_KERNELDEPEND do not run ${MAKE} depend in ${MAKE} buildkernel 20# -DNO_PORTSUPDATE do not update ports in ${MAKE} update 21# -DNO_DOCUPDATE do not update doc in ${MAKE} update 22# LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list 23# TARGET_ARCH="arch" to crossbuild world to a different arch 24 25# 26# The intended user-driven targets are: 27# buildworld - rebuild *everything*, including glue to help do upgrades 28# installworld- install everything built by "buildworld" 29# update - convenient way to update your source tree (eg: sup/cvs) 30# most - build user commands, no libraries or include files 31# installmost - install user commands, no libraries or include files 32# 33# Standard targets (not defined here) are documented in the makefiles in 34# /usr/share/mk. These include: 35# obj depend all install clean cleandepend cleanobj 36 37# Put initial settings here. 38SUBDIR= 39 40# We must do share/info early so that installation of info `dir' 41# entries works correctly. Do it first since it is less likely to 42# grow dependencies on include and lib than vice versa. 43.if exists(${.CURDIR}/share/info) 44SUBDIR+= share/info 45.endif 46 47.if exists(${.CURDIR}/include) 48SUBDIR+= include 49.endif 50.if exists(${.CURDIR}/lib) 51SUBDIR+= lib 52.endif 53 54.if exists(${.CURDIR}/bin) 55SUBDIR+= bin 56.endif 57.if exists(${.CURDIR}/games) && !defined(NOGAMES) 58SUBDIR+= games 59.endif 60.if exists(${.CURDIR}/gnu) 61SUBDIR+= gnu 62.endif 63.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \ 64 !defined(NOCRYPT) && !defined(NO_OPENSSL) && !defined(NO_KERBEROS) 65SUBDIR+= kerberos5 66.endif 67.if exists(${.CURDIR}/libexec) 68SUBDIR+= libexec 69.endif 70.if exists(${.CURDIR}/sbin) 71SUBDIR+= sbin 72.endif 73.if exists(${.CURDIR}/secure) && !defined(NOCRYPT) && !defined(NOSECURE) 74SUBDIR+= secure 75.endif 76.if exists(${.CURDIR}/share) && !defined(NOSHARE) 77SUBDIR+= share 78.endif 79.if exists(${.CURDIR}/sys) 80SUBDIR+= sys 81.endif 82.if exists(${.CURDIR}/usr.bin) 83SUBDIR+= usr.bin 84.endif 85.if exists(${.CURDIR}/usr.sbin) 86SUBDIR+= usr.sbin 87.endif 88 89# etc must be last for "distribute" to work 90.if exists(${.CURDIR}/etc) 91SUBDIR+= etc 92.endif 93 94# These are last, since it is nice to at least get the base system 95# rebuilt before you do them. 96.if defined(LOCAL_DIRS) 97.for _DIR in ${LOCAL_DIRS} 98.if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile) 99SUBDIR+= ${_DIR} 100.endif 101.endfor 102.endif 103 104.if defined(SUBDIR_OVERRIDE) 105SUBDIR= ${SUBDIR_OVERRIDE} 106.endif 107 108.if defined(NOCLEANDIR) 109CLEANDIR= clean cleandepend 110.else 111CLEANDIR= cleandir 112.endif 113 114CVS?= cvs 115SUP?= /usr/local/bin/cvsup 116SUPFLAGS?= -g -L 2 -P - 117.if defined(SUPHOST) 118SUPFLAGS+= -h ${SUPHOST} 119.endif 120 121MAKEOBJDIRPREFIX?= /usr/obj 122.if !defined(OSRELDATE) 123OSRELDATE!= sysctl -n kern.osreldate 124.endif 125TARGET_ARCH?= ${MACHINE_ARCH} 126.if ${TARGET_ARCH} == ${MACHINE_ARCH} 127TARGET?= ${MACHINE} 128TARGET_CPUTYPE?=${CPUTYPE} 129.else 130TARGET?= ${TARGET_ARCH} 131TARGET_CPUTYPE?= 132.endif 133.if !empty(TARGET_CPUTYPE) 134_TARGET_CPUTYPE=${TARGET_CPUTYPE} 135.else 136_TARGET_CPUTYPE=dummy 137.endif 138_CPUTYPE!= ${MAKE} -f /dev/null -m ${.CURDIR}/share/mk \ 139 CPUTYPE=${_TARGET_CPUTYPE} -V CPUTYPE 140.if ${_CPUTYPE} != ${_TARGET_CPUTYPE} 141.error CPUTYPE global should be set with ?=. 142.endif 143.if make(buildworld) 144BUILD_ARCH!= sysctl -n hw.machine_arch 145.if ${MACHINE_ARCH} != ${BUILD_ARCH} 146.error To cross-build, set TARGET_ARCH. 147.endif 148.endif 149.if ${MACHINE} == ${TARGET} 150OBJTREE= ${MAKEOBJDIRPREFIX} 151.else 152OBJTREE= ${MAKEOBJDIRPREFIX}/${TARGET} 153.endif 154WORLDTMP= ${OBJTREE}${.CURDIR}/${MACHINE_ARCH} 155# /usr/games added for fortune which depend on strfile 156BPATH= ${WORLDTMP}/legacy/usr/sbin:${WORLDTMP}/legacy/usr/bin:${WORLDTMP}/legacy/usr/games 157XPATH= ${WORLDTMP}/usr/sbin:${WORLDTMP}/usr/bin:${WORLDTMP}/usr/games 158STRICTTMPPATH= ${BPATH}:${XPATH} 159TMPPATH= ${STRICTTMPPATH}:${PATH} 160 161INSTALLTMP!= /usr/bin/mktemp -d -u -t install 162 163# 164# Building a world goes through the following stages 165# 166# 1. legacy stage [BMAKE] 167# This stage is responsible for creating compatibility 168# shims that are needed by the bootstrap-tools, 169# build-tools and cross-tools stages. 170# 1. bootstrap-tools stage [BMAKE] 171# This stage is responsible for creating programs that 172# are needed for backward compatibility reasons. They 173# are not built as cross-tools. 174# 2. build-tools stage [TMAKE] 175# This stage is responsible for creating the object 176# tree and building any tools that are needed during 177# the build process. 178# 3. cross-tools stage [XMAKE] 179# This stage is responsible for creating any tools that 180# are needed for cross-builds. A cross-compiler is one 181# of them. 182# 4. world stage [WMAKE] 183# This stage actually builds the world. 184# 5. install stage (optional) [IMAKE] 185# This stage installs a previously built world. 186# 187 188BOOTSTRAPPING?= 0 189 190# Common environment for world related stages 191CROSSENV= MAKEOBJDIRPREFIX=${OBJTREE} \ 192 MACHINE_ARCH=${TARGET_ARCH} \ 193 MACHINE=${TARGET} \ 194 CPUTYPE=${TARGET_CPUTYPE} \ 195 GROFF_BIN_PATH=${WORLDTMP}/legacy/usr/bin \ 196 GROFF_FONT_PATH=${WORLDTMP}/legacy/usr/share/groff_font \ 197 GROFF_TMAC_PATH=${WORLDTMP}/legacy/usr/share/tmac 198 199# bootstrap-tools stage 200BMAKEENV= DESTDIR= \ 201 INSTALL="sh ${.CURDIR}/tools/install.sh" \ 202 PATH=${BPATH}:${PATH} \ 203 WORLDTMP=${WORLDTMP} \ 204 MAKEFLAGS="-m ${.CURDIR}/tools/build/mk ${.MAKEFLAGS}" 205BMAKE= MAKEOBJDIRPREFIX=${WORLDTMP} \ 206 ${BMAKEENV} ${MAKE} -f Makefile.inc1 \ 207 BOOTSTRAPPING=${OSRELDATE} \ 208 -DNOHTML -DNOINFO -DNOLINT -DNOMAN -DNOPIC -DNOPROFILE \ 209 -DNOSHARED -DNO_CPU_CFLAGS -DNO_WARNS 210 211# build-tools stage 212TMAKE= MAKEOBJDIRPREFIX=${OBJTREE} \ 213 ${BMAKEENV} ${MAKE} -f Makefile.inc1 \ 214 BOOTSTRAPPING=${OSRELDATE} -DNOLINT -DNO_CPU_CFLAGS -DNO_WARNS 215 216# cross-tools stage 217XMAKE= TOOLS_PREFIX=${WORLDTMP} ${BMAKE} -DNO_FORTRAN -DNO_GDB 218 219# world stage 220WMAKEENV= ${CROSSENV} \ 221 DESTDIR=${WORLDTMP} \ 222 INSTALL="sh ${.CURDIR}/tools/install.sh" \ 223 PATH=${TMPPATH} 224WMAKE= ${WMAKEENV} ${MAKE} -f Makefile.inc1 225 226# install stage 227IMAKEENV= ${CROSSENV} \ 228 PATH=${STRICTTMPPATH}:${INSTALLTMP} 229IMAKE= ${IMAKEENV} ${MAKE} -f Makefile.inc1 230 231# kernel stage 232KMAKEENV= ${WMAKEENV} 233 234# 235# buildworld 236# 237# Attempt to rebuild the entire system, with reasonable chance of 238# success, regardless of how old your existing system is. 239# 240_worldtmp: 241.if ${.CURDIR:C/[^,]//g} != "" 242# The m4 build of sendmail files doesn't like it if ',' is used 243# anywhere in the path of it's files. 244 @echo 245 @echo "*** Error: path to source tree contains a comma ','" 246 @echo 247 @false 248.endif 249 @echo 250 @echo "--------------------------------------------------------------" 251 @echo ">>> Rebuilding the temporary build tree" 252 @echo "--------------------------------------------------------------" 253.if !defined(NOCLEAN) 254 rm -rf ${WORLDTMP} 255.else 256 rm -rf ${WORLDTMP}/legacy/usr/include 257 # XXX - These two can depend on any header file. 258 rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c 259 rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c 260.endif 261.for _dir in \ 262 usr/bin usr/games usr/include/sys usr/lib \ 263 usr/libexec usr/sbin usr/share/dict \ 264 usr/share/groff_font/devX100 \ 265 usr/share/groff_font/devX100-12 \ 266 usr/share/groff_font/devX75 \ 267 usr/share/groff_font/devX75-12 \ 268 usr/share/groff_font/devascii \ 269 usr/share/groff_font/devcp1047 \ 270 usr/share/groff_font/devdvi \ 271 usr/share/groff_font/devhtml \ 272 usr/share/groff_font/devkoi8-r \ 273 usr/share/groff_font/devlatin1 \ 274 usr/share/groff_font/devlbp \ 275 usr/share/groff_font/devlj4 \ 276 usr/share/groff_font/devps \ 277 usr/share/groff_font/devutf8 \ 278 usr/share/tmac/mdoc usr/share/tmac/mm 279 mkdir -p ${WORLDTMP}/legacy/${_dir} 280.endfor 281.for _dir in \ 282 usr/bin usr/lib/compat/aout usr/libdata/ldscripts usr/libexec usr/share/misc 283 mkdir -p ${WORLDTMP}/${_dir} 284.endfor 285.for _dir in \ 286 arpa dev fs g++/backward g++/bits g++/ext isc isofs libmilter \ 287 objc openssl protocols readline rpc rpcsvc security ufs 288 mkdir -p ${WORLDTMP}/usr/include/${_dir} 289.endfor 290 ln -sf ${.CURDIR}/sys ${WORLDTMP} 291_legacy: 292 @echo 293 @echo "--------------------------------------------------------------" 294 @echo ">>> stage 1: legacy release compatibility shims" 295 @echo "--------------------------------------------------------------" 296 cd ${.CURDIR}; ${BMAKE} legacy 297_bootstrap-tools: 298 @echo 299 @echo "--------------------------------------------------------------" 300 @echo ">>> stage 1: bootstrap tools" 301 @echo "--------------------------------------------------------------" 302 cd ${.CURDIR}; ${BMAKE} bootstrap-tools 303_cleanobj: 304.if !defined(NOCLEAN) 305 @echo 306 @echo "--------------------------------------------------------------" 307 @echo ">>> stage 2: cleaning up the object tree" 308 @echo "--------------------------------------------------------------" 309 cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/} 310.endif 311_obj: 312 @echo 313 @echo "--------------------------------------------------------------" 314 @echo ">>> stage 2: rebuilding the object tree" 315 @echo "--------------------------------------------------------------" 316 cd ${.CURDIR}; ${WMAKE} par-obj 317_build-tools: 318 @echo 319 @echo "--------------------------------------------------------------" 320 @echo ">>> stage 2: build tools" 321 @echo "--------------------------------------------------------------" 322 cd ${.CURDIR}; ${TMAKE} build-tools 323_cross-tools: 324 @echo 325 @echo "--------------------------------------------------------------" 326 @echo ">>> stage 3: cross tools" 327 @echo "--------------------------------------------------------------" 328 cd ${.CURDIR}; ${XMAKE} cross-tools 329_includes: 330 @echo 331 @echo "--------------------------------------------------------------" 332 @echo ">>> stage 4: populating ${WORLDTMP}/usr/include" 333 @echo "--------------------------------------------------------------" 334 cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes 335_libraries: 336 @echo 337 @echo "--------------------------------------------------------------" 338 @echo ">>> stage 4: building libraries" 339 @echo "--------------------------------------------------------------" 340 cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries 341_depend: 342 @echo 343 @echo "--------------------------------------------------------------" 344 @echo ">>> stage 4: make dependencies" 345 @echo "--------------------------------------------------------------" 346 cd ${.CURDIR}; ${WMAKE} par-depend 347everything: 348 @echo 349 @echo "--------------------------------------------------------------" 350 @echo ">>> stage 4: building everything.." 351 @echo "--------------------------------------------------------------" 352 cd ${.CURDIR}; ${WMAKE} par-all 353 354 355WMAKE_TGTS= 356.if !defined(SUBDIR_OVERRIDE) 357WMAKE_TGTS+= _worldtmp _legacy _bootstrap-tools 358.endif 359WMAKE_TGTS+= _cleanobj _obj _build-tools 360.if !defined(SUBDIR_OVERRIDE) 361WMAKE_TGTS+= _cross-tools 362.endif 363WMAKE_TGTS+= _includes _libraries _depend everything 364 365buildworld: ${WMAKE_TGTS} 366.ORDER: ${WMAKE_TGTS} 367 368# 369# installcheck 370# 371# Checks to be sure system is ready for installworld 372# 373installcheck: 374.if !defined(NO_SENDMAIL) 375 @if ! `grep -q '^smmsp:' /etc/passwd`; then \ 376 echo "ERROR: Required smmsp user is missing, see /usr/src/UPDATING."; \ 377 false; \ 378 fi 379 @if ! `grep -q '^smmsp:' /etc/group`; then \ 380 echo "ERROR: Required smmsp group is missing, see /usr/src/UPDATING."; \ 381 false; \ 382 fi 383.endif 384.if ${TARGET_ARCH} == ${MACHINE_ARCH} && !defined(DISTDIR) && \ 385 (!defined(DESTDIR) || empty(DESTDIR) || ${DESTDIR} == "/") 386 @echo "Checking to see if your booted kernel is fresh enough.." 387 ${.OBJDIR}/bin/sh/sh -c \ 388 'echo "Testing installed kernel for new sigaction(2) syscall"' 389 @echo "Seems ok.." 390.endif 391 392# 393# distributeworld 394# 395# Distributes everything compiled by a `buildworld'. 396# 397# installworld 398# 399# Installs everything compiled by a 'buildworld'. 400# 401distributeworld installworld: installcheck 402 mkdir -p ${INSTALLTMP} 403 for prog in [ awk cap_mkdb cat chflags chmod chown \ 404 date echo egrep find grep \ 405 ln make mkdir mtree mv pwd_mkdb rm sed sh sysctl \ 406 test true uname wc zic; do \ 407 cp `which $$prog` ${INSTALLTMP}; \ 408 done 409 cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//} 410 rm -rf ${INSTALLTMP} 411 412# 413# reinstall 414# 415# If you have a build server, you can NFS mount the source and obj directories 416# and do a 'make reinstall' on the *client* to install new binaries from the 417# most recent server build. 418# 419reinstall: 420 @echo "--------------------------------------------------------------" 421 @echo ">>> Making hierarchy" 422 @echo "--------------------------------------------------------------" 423 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy 424 @echo 425 @echo "--------------------------------------------------------------" 426 @echo ">>> Installing everything.." 427 @echo "--------------------------------------------------------------" 428 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install 429.if !defined(NOMAN) && !defined(NO_MAKEDB_RUN) 430 @echo 431 @echo "--------------------------------------------------------------" 432 @echo ">>> Rebuilding man page indices" 433 @echo "--------------------------------------------------------------" 434 cd ${.CURDIR}/share/man; ${MAKE} makedb 435.endif 436 437redistribute: 438 @echo "--------------------------------------------------------------" 439 @echo ">>> Distributing everything.." 440 @echo "--------------------------------------------------------------" 441 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 distribute 442 443# 444# buildkernel and installkernel 445# 446# Which kernels to build and/or install is specified by setting 447# KERNCONF. If not defined a GENERIC kernel is built/installed. 448# Only the existing (depending TARGET) config files are used 449# for building kernels and only the first of these is designated 450# as the one being installed. 451# 452# Note that we have to use TARGET instead of TARGET_ARCH when 453# we're in kernel-land. Since only TARGET_ARCH is (expected) to 454# be set to cross-build, we have to make sure TARGET is set 455# properly. 456 457.if !defined(KERNCONF) && defined(KERNEL) 458KERNCONF= ${KERNEL} 459KERNWARN= yes 460.else 461KERNCONF?= GENERIC 462.endif 463INSTKERNNAME?= kernel 464 465KERNSRCDIR?= ${.CURDIR}/sys 466KRNLCONFDIR= ${KERNSRCDIR}/${TARGET}/conf 467KRNLOBJDIR= ${OBJTREE}${KERNSRCDIR} 468KERNCONFDIR?= ${KRNLCONFDIR} 469 470BUILDKERNELS= 471INSTALLKERNEL= 472.for _kernel in ${KERNCONF} 473.if exists(${KERNCONFDIR}/${_kernel}) 474BUILDKERNELS+= ${_kernel} 475.if empty(INSTALLKERNEL) 476INSTALLKERNEL= ${_kernel} 477.endif 478.endif 479.endfor 480 481# 482# buildkernel 483# 484# Builds all kernels defined by BUILDKERNELS. 485# 486buildkernel: 487.if empty(BUILDKERNELS) 488 @echo "ERROR: Missing kernel configuration file(s) (${KERNCONF})."; 489 @false 490.endif 491.if defined(KERNWARN) 492 @echo "--------------------------------------------------------------" 493 @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF=" 494 @echo "--------------------------------------------------------------" 495 @sleep 3 496.endif 497 @echo 498.for _kernel in ${BUILDKERNELS} 499 @echo "--------------------------------------------------------------" 500 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`" 501 @echo "--------------------------------------------------------------" 502 @echo "===> ${_kernel}" 503 mkdir -p ${KRNLOBJDIR} 504.if !defined(NO_KERNELCONFIG) 505 cd ${KRNLCONFDIR}; \ 506 PATH=${TMPPATH} \ 507 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \ 508 ${KERNCONFDIR}/${_kernel} 509.endif 510.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) 511 cd ${KRNLOBJDIR}/${_kernel}; \ 512 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} ${CLEANDIR} 513.endif 514 cd ${KRNLOBJDIR}/${_kernel}; \ 515 MAKESRCPATH=${KERNSRCDIR}/dev/aic7xxx/aicasm \ 516 ${MAKE} -DNO_CPU_CFLAGS -f ${KERNSRCDIR}/dev/aic7xxx/aicasm/Makefile 517 cd ${KRNLOBJDIR}/${_kernel}; \ 518 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} obj 519# XXX - Gratuitously builds aicasm in the ``makeoptions NO_MODULES'' case. 520.if !defined(MODULES_WITH_WORLD) && !defined(NO_MODULES) && exists(${KERNSRCDIR}/modules) 521.for target in obj depend all 522 cd ${.CURDIR}/sys/modules/aic7xxx/aicasm; \ 523 MAKEOBJDIRPREFIX=${KRNLOBJDIR}/${_kernel}/modules \ 524 ${MAKE} -DNO_CPU_CFLAGS ${target} 525.endfor 526.endif 527.if !defined(NO_KERNELDEPEND) 528 cd ${KRNLOBJDIR}/${_kernel}; \ 529 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend -DNO_MODULES_OBJ 530.endif 531 cd ${KRNLOBJDIR}/${_kernel}; \ 532 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all -DNO_MODULES_OBJ 533 @echo "--------------------------------------------------------------" 534 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`" 535 @echo "--------------------------------------------------------------" 536.endfor 537 538# 539# installkernel 540# 541# Install the kernel defined by INSTALLKERNEL 542# 543installkernel reinstallkernel: 544.if empty(INSTALLKERNEL) 545 @echo "ERROR: No kernel \"${KERNCONF}\" to install." 546 @false 547.endif 548 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \ 549 ${CROSSENV} PATH=${TMPPATH} \ 550 ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//} 551 552# 553# update 554# 555# Update the source tree, by running sup and/or running cvs to update to the 556# latest copy. 557# 558update: 559.if defined(SUP_UPDATE) 560 @echo "--------------------------------------------------------------" 561 @echo ">>> Running ${SUP}" 562 @echo "--------------------------------------------------------------" 563.if defined(SUPFILE) 564 @${SUP} ${SUPFLAGS} ${SUPFILE} 565.endif 566.if defined(SUPFILE1) 567 @${SUP} ${SUPFLAGS} ${SUPFILE1} 568.endif 569.if defined(SUPFILE2) 570 @${SUP} ${SUPFLAGS} ${SUPFILE2} 571.endif 572.if defined(PORTSSUPFILE) && !defined(NO_PORTSUPDATE) 573 @${SUP} ${SUPFLAGS} ${PORTSSUPFILE} 574.endif 575.if defined(DOCSUPFILE) && !defined(NO_DOCUPDATE) 576 @${SUP} ${SUPFLAGS} ${DOCSUPFILE} 577.endif 578.endif 579.if defined(CVS_UPDATE) 580 @echo "--------------------------------------------------------------" 581 @echo ">>> Updating ${.CURDIR} from cvs repository" ${CVSROOT} 582 @echo "--------------------------------------------------------------" 583 cd ${.CURDIR}; ${CVS} -R -q update -A -P -d 584.endif 585 586# 587# most 588# 589# Build most of the user binaries on the existing system libs and includes. 590# 591most: 592 @echo "--------------------------------------------------------------" 593 @echo ">>> Building programs only" 594 @echo "--------------------------------------------------------------" 595.for _dir in bin sbin libexec usr.bin usr.sbin gnu/usr.bin gnu/usr.sbin 596 cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ all 597.endfor 598 599# 600# installmost 601# 602# Install the binaries built by the 'most' target. This does not include 603# libraries or include files. 604# 605installmost: 606 @echo "--------------------------------------------------------------" 607 @echo ">>> Installing programs only" 608 @echo "--------------------------------------------------------------" 609.for _dir in bin sbin libexec usr.bin usr.sbin gnu/usr.bin gnu/usr.sbin 610 cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ install 611.endfor 612 613# 614# ------------------------------------------------------------------------ 615# 616# From here onwards are utility targets used by the 'make world' and 617# related targets. If your 'world' breaks, you may like to try to fix 618# the problem and manually run the following targets to attempt to 619# complete the build. Beware, this is *not* guaranteed to work, you 620# need to have a pretty good grip on the current state of the system 621# to attempt to manually finish it. If in doubt, 'make world' again. 622# 623 624# 625# legacy: Build compatibility shims for the next three targets 626# 627legacy: 628.for _tool in tools/build 629 @${ECHODIR} "===> ${_tool}"; \ 630 cd ${.CURDIR}/${_tool}; \ 631 ${MAKE} DIRPRFX=${_tool}/ obj; \ 632 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy includes; \ 633 ${MAKE} DIRPRFX=${_tool}/ depend; \ 634 ${MAKE} DIRPRFX=${_tool}/ all; \ 635 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy install 636.endfor 637 638# 639# bootstrap-tools: Build tools needed for compatibility 640# 641.if exists(${.CURDIR}/games) && !defined(NOGAMES) 642_strfile= games/fortune/strfile 643.endif 644 645.if ${BOOTSTRAPPING} < 500113 646_groff= gnu/usr.bin/groff 647.else 648_groff= gnu/usr.bin/groff/tmac 649.endif 650 651.if ( ${BOOTSTRAPPING} < 450005 || \ 652 ( ${BOOTSTRAPPING} >= 500000 && ${BOOTSTRAPPING} < 500034 )) 653_uudecode= usr.bin/uudecode 654.endif 655 656.if ( ${BOOTSTRAPPING} < 430002 || \ 657 ( ${BOOTSTRAPPING} >= 500000 && ${BOOTSTRAPPING} < 500019 )) 658_xargs= usr.bin/xargs 659.endif 660 661.if ( ${BOOTSTRAPPING} < 430002 || \ 662 ( ${BOOTSTRAPPING} >= 500000 && ${BOOTSTRAPPING} < 500018 )) 663_yacc= usr.bin/yacc 664.endif 665 666.if ${BOOTSTRAPPING} < 500019 667_kbdcontrol= usr.sbin/kbdcontrol 668.endif 669 670bootstrap-tools: 671.for _tool in ${_strfile} usr.bin/colldef \ 672 usr.bin/makewhatis usr.bin/rpcgen ${_uudecode} \ 673 ${_xargs} usr.bin/xinstall ${_yacc} \ 674 usr.sbin/config ${_kbdcontrol} \ 675 gnu/usr.bin/gperf ${_groff} gnu/usr.bin/texinfo 676 @${ECHODIR} "===> ${_tool}"; \ 677 cd ${.CURDIR}/${_tool}; \ 678 ${MAKE} DIRPRFX=${_tool}/ obj; \ 679 ${MAKE} DIRPRFX=${_tool}/ depend; \ 680 ${MAKE} DIRPRFX=${_tool}/ all; \ 681 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy install 682.endfor 683 684# 685# build-tools: Build special purpose build tools 686# 687.if defined(MODULES_WITH_WORLD) && exists(${KERNSRCDIR}/modules) 688_aicasm= sys/modules/aic7xxx/aicasm 689.endif 690 691.if exists(${.CURDIR}/share) && !defined(NOSHARE) 692_share= share/syscons/scrnmaps 693.endif 694 695.if !defined(NO_FORTRAN) 696_fortran= gnu/usr.bin/cc/f771 697.endif 698 699.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \ 700 !defined(NOCRYPT) && !defined(NO_KERBEROS) 701_libkrb5= kerberos5/lib/libroken kerberos5/lib/libvers \ 702 kerberos5/lib/libasn1 kerberos5/lib/libhdb kerberos5/lib/libsl 703.endif 704 705build-tools: 706.for _tool in bin/csh bin/sh gnu/usr.bin/cc/cc_tools ${_fortran} \ 707 ${_libkrb5} lib/libncurses ${_share} \ 708 ${_aicasm} usr.bin/awk usr.bin/file usr.sbin/sysinstall 709 @${ECHODIR} "===> ${_tool}"; \ 710 cd ${.CURDIR}/${_tool}; \ 711 ${MAKE} DIRPRFX=${_tool}/ obj; \ 712 ${MAKE} DIRPRFX=${_tool}/ build-tools 713.endfor 714 715# 716# cross-tools: Build cross-building tools 717# 718.if ${TARGET_ARCH} == "alpha" && ${TARGET_ARCH} != ${MACHINE_ARCH} 719_elf2exe= usr.sbin/elf2exe 720.endif 721 722.if ${TARGET_ARCH} == "i386" && ${TARGET_ARCH} != ${MACHINE_ARCH} 723_btxld= usr.sbin/btxld 724.if defined(RELEASEDIR) 725_kgzip= usr.sbin/kgzip 726.endif 727.endif 728 729.if ${TARGET_ARCH} == "sparc64" && ${TARGET_ARCH} != ${MACHINE_ARCH} && \ 730 ${BOOTSTRAPPING} < 500037 731_elf2aout= usr.bin/elf2aout 732.endif 733 734.if defined(RELEASEDIR) 735_crunchide= usr.sbin/crunch/crunchide 736.endif 737 738_xlint= usr.bin/xlint/lint1 usr.bin/xlint/lint2 usr.bin/xlint/xlint 739 740cross-tools: 741.for _tool in ${_btxld} ${_elf2aout} ${_elf2exe} \ 742 gnu/usr.bin/binutils ${_crunchide} \ 743 gnu/usr.bin/cc ${_xlint} ${_kgzip} 744 @${ECHODIR} "===> ${_tool}"; \ 745 cd ${.CURDIR}/${_tool}; \ 746 ${MAKE} DIRPRFX=${_tool}/ obj; \ 747 ${MAKE} DIRPRFX=${_tool}/ depend; \ 748 ${MAKE} DIRPRFX=${_tool}/ all; \ 749 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX} install 750.endfor 751 752# 753# hierarchy - ensure that all the needed directories are present 754# 755hierarchy: 756 cd ${.CURDIR}/etc; ${MAKE} distrib-dirs 757 758# 759# libraries - build all libraries, and install them under ${DESTDIR}. 760# 761# The list of libraries with dependents (${_prebuild_libs}) and their 762# interdependencies (__L) are built automatically by the 763# ${.CURDIR}/tools/make_libdeps.sh script. 764# 765libraries: 766 cd ${.CURDIR}; \ 767 ${MAKE} -f Makefile.inc1 _startup_libs; \ 768 ${MAKE} -f Makefile.inc1 _prebuild_libs; \ 769 ${MAKE} -f Makefile.inc1 _generic_libs; 770 771# These dependencies are not automatically generated: 772# 773# gnu/lib/csu, gnu/lib/libgcc and lib/csu must be built before all 774# shared libraries for ELF. 775# 776_startup_libs= gnu/lib/csu gnu/lib/libgcc 777.if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH}-elf) 778_startup_libs+= lib/csu/${MACHINE_ARCH}-elf 779.else 780_startup_libs+= lib/csu/${MACHINE_ARCH} 781.endif 782 783_prebuild_libs= 784 785_generic_libs= gnu/lib 786 787.if !defined(NOCRYPT) && !defined(NO_KERBEROS) 788_prebuild_libs+= kerberos5/lib/libasn1 789_prebuild_libs+= kerberos5/lib/libgssapi 790_prebuild_libs+= kerberos5/lib/libkrb5 791_prebuild_libs+= kerberos5/lib/libroken 792_generic_libs+= kerberos5/lib 793.endif 794 795_prebuild_libs+= lib/libcom_err lib/libcrypt lib/libkvm lib/libmd \ 796 lib/libncurses lib/libopie lib/libpam lib/libradius \ 797 lib/librpcsvc \ 798 lib/libsbuf lib/libtacplus lib/libutil lib/libypclnt \ 799 lib/libz lib/msun 800 801lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L 802lib/libypclnt__L: lib/librpcsvc__L 803 804_generic_libs+= lib 805 806.if !defined(NOCRYPT) && !defined(NOSECURE) 807.if !defined(NO_OPENSSL) 808_prebuild_libs+= secure/lib/libcrypto secure/lib/libssl 809.if !defined(NO_OPENSSH) 810_prebuild_libs+= secure/lib/libssh 811secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L 812.endif 813.endif 814_generic_libs+= secure/lib 815.endif 816 817_generic_libs+= usr.bin/lex/lib 818 819.if ${MACHINE_ARCH} == "i386" 820_generic_libs+= usr.sbin/pcvt/keycap 821.endif 822 823.for _lib in ${_startup_libs} ${_prebuild_libs:Nlib/libpam} ${_generic_libs} 824${_lib}__L: .PHONY 825.if exists(${.CURDIR}/${_lib}) 826 @${ECHODIR} "===> ${_lib}"; \ 827 cd ${.CURDIR}/${_lib}; \ 828 ${MAKE} DIRPRFX=${_lib}/ depend; \ 829 ${MAKE} DIRPRFX=${_lib}/ all; \ 830 ${MAKE} DIRPRFX=${_lib}/ install 831.endif 832.endfor 833 834# libpam is special: we need to build static PAM modules before 835# static PAM library, and dynamic PAM library before dynamic PAM 836# modules. 837lib/libpam__L: .PHONY 838 @${ECHODIR} "===> lib/libpam"; \ 839 cd ${.CURDIR}/lib/libpam; \ 840 ${MAKE} DIRPRFX=lib/libpam/ depend; \ 841 ${MAKE} DIRPRFX=lib/libpam/ -D_NO_LIBPAM_SO_YET all; \ 842 ${MAKE} DIRPRFX=lib/libpam/ -D_NO_LIBPAM_SO_YET install 843 844_startup_libs: ${_startup_libs:S/$/__L/} 845_prebuild_libs: ${_prebuild_libs:S/$/__L/} 846_generic_libs: ${_generic_libs:S/$/__L/} 847 848.for __target in all clean cleandepend cleandir depend includes obj 849.for entry in ${SUBDIR} 850${entry}.${__target}__D: .PHONY 851 @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \ 852 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \ 853 edir=${entry}.${MACHINE_ARCH}; \ 854 cd ${.CURDIR}/$${edir}; \ 855 else \ 856 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \ 857 edir=${entry}; \ 858 cd ${.CURDIR}/$${edir}; \ 859 fi; \ 860 ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/ 861.endfor 862par-${__target}: ${SUBDIR:S/$/.${__target}__D/} 863.endfor 864 865.include <bsd.subdir.mk> 866