1/*-
2 * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
3 * Copyright (c) 2010-2011 Juniper Networks, Inc.
4 * All rights reserved.
5 *
6 * Portions of this software were developed by Robert N. M. Watson under
7 * contract to Juniper Networks, Inc.
8 *
9 * Redistribution and use in source and binary forms, with or without
10 * modification, are permitted provided that the following conditions
11 * are met:
12 * 1. Redistributions of source code must retain the above copyright
13 *    notice, this list of conditions and the following disclaimer.
14 * 2. Redistributions in binary form must reproduce the above copyright
15 *    notice, this list of conditions and the following disclaimer in the
16 *    documentation and/or other materials provided with the distribution.
17 * 3. Neither the name of the project nor the names of its contributors
18 *    may be used to endorse or promote products derived from this software
19 *    without specific prior written permission.
20 *
21 * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
22 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
24 * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
25 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
26 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
27 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
28 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
29 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
30 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
31 * SUCH DAMAGE.
32 *
33 *	$KAME: in6_pcb.c,v 1.31 2001/05/21 05:45:10 jinmei Exp $
34 */
35
36/*-
37 * Copyright (c) 1982, 1986, 1991, 1993
38 *	The Regents of the University of California.  All rights reserved.
39 *
40 * Redistribution and use in source and binary forms, with or without
41 * modification, are permitted provided that the following conditions
42 * are met:
43 * 1. Redistributions of source code must retain the above copyright
44 *    notice, this list of conditions and the following disclaimer.
45 * 2. Redistributions in binary form must reproduce the above copyright
46 *    notice, this list of conditions and the following disclaimer in the
47 *    documentation and/or other materials provided with the distribution.
48 * 4. Neither the name of the University nor the names of its contributors
49 *    may be used to endorse or promote products derived from this software
50 *    without specific prior written permission.
51 *
52 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
53 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
54 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
55 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
56 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
57 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
58 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
59 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
60 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
61 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
62 * SUCH DAMAGE.
63 *
64 *	@(#)in_pcb.c	8.2 (Berkeley) 1/4/94
65 */
66
67#include <sys/cdefs.h>
68__FBSDID("$FreeBSD$");
69
70#include "opt_inet.h"
71#include "opt_inet6.h"
72#include "opt_ipsec.h"
73#include "opt_pcbgroup.h"
74
75#include <sys/param.h>
76#include <sys/systm.h>
77#include <sys/malloc.h>
78#include <sys/mbuf.h>
79#include <sys/domain.h>
80#include <sys/protosw.h>
81#include <sys/socket.h>
82#include <sys/socketvar.h>
83#include <sys/sockio.h>
84#include <sys/errno.h>
85#include <sys/time.h>
86#include <sys/priv.h>
87#include <sys/proc.h>
88#include <sys/jail.h>
89
90#include <vm/uma.h>
91
92#include <net/if.h>
93#include <net/if_types.h>
94#include <net/route.h>
95
96#include <netinet/in.h>
97#include <netinet/in_var.h>
98#include <netinet/in_systm.h>
99#include <netinet/tcp_var.h>
100#include <netinet/ip6.h>
101#include <netinet/ip_var.h>
102
103#include <netinet6/ip6_var.h>
104#include <netinet6/nd6.h>
105#include <netinet/in_pcb.h>
106#include <netinet6/in6_pcb.h>
107#include <netinet6/scope6_var.h>
108
109int
110in6_pcbbind(register struct inpcb *inp, struct sockaddr *nam,
111    struct ucred *cred)
112{
113	struct socket *so = inp->inp_socket;
114	struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)NULL;
115	struct inpcbinfo *pcbinfo = inp->inp_pcbinfo;
116	u_short	lport = 0;
117	int error, lookupflags = 0;
118	int reuseport = (so->so_options & SO_REUSEPORT);
119
120	INP_WLOCK_ASSERT(inp);
121	INP_HASH_WLOCK_ASSERT(pcbinfo);
122
123	if (TAILQ_EMPTY(&V_in6_ifaddrhead))	/* XXX broken! */
124		return (EADDRNOTAVAIL);
125	if (inp->inp_lport || !IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_laddr))
126		return (EINVAL);
127	if ((so->so_options & (SO_REUSEADDR|SO_REUSEPORT)) == 0)
128		lookupflags = INPLOOKUP_WILDCARD;
129	if (nam == NULL) {
130		if ((error = prison_local_ip6(cred, &inp->in6p_laddr,
131		    ((inp->inp_flags & IN6P_IPV6_V6ONLY) != 0))) != 0)
132			return (error);
133	} else {
134		sin6 = (struct sockaddr_in6 *)nam;
135		if (nam->sa_len != sizeof(*sin6))
136			return (EINVAL);
137		/*
138		 * family check.
139		 */
140		if (nam->sa_family != AF_INET6)
141			return (EAFNOSUPPORT);
142
143		if ((error = sa6_embedscope(sin6, V_ip6_use_defzone)) != 0)
144			return(error);
145
146		if ((error = prison_local_ip6(cred, &sin6->sin6_addr,
147		    ((inp->inp_flags & IN6P_IPV6_V6ONLY) != 0))) != 0)
148			return (error);
149
150		lport = sin6->sin6_port;
151		if (IN6_IS_ADDR_MULTICAST(&sin6->sin6_addr)) {
152			/*
153			 * Treat SO_REUSEADDR as SO_REUSEPORT for multicast;
154			 * allow compepte duplication of binding if
155			 * SO_REUSEPORT is set, or if SO_REUSEADDR is set
156			 * and a multicast address is bound on both
157			 * new and duplicated sockets.
158			 */
159			if ((so->so_options & (SO_REUSEADDR|SO_REUSEPORT)) != 0)
160				reuseport = SO_REUSEADDR|SO_REUSEPORT;
161		} else if (!IN6_IS_ADDR_UNSPECIFIED(&sin6->sin6_addr)) {
162			struct ifaddr *ifa;
163
164			sin6->sin6_port = 0;		/* yech... */
165			if ((ifa = ifa_ifwithaddr((struct sockaddr *)sin6)) ==
166			    NULL &&
167			    (inp->inp_flags & INP_BINDANY) == 0) {
168				return (EADDRNOTAVAIL);
169			}
170
171			/*
172			 * XXX: bind to an anycast address might accidentally
173			 * cause sending a packet with anycast source address.
174			 * We should allow to bind to a deprecated address, since
175			 * the application dares to use it.
176			 */
177			if (ifa != NULL &&
178			    ((struct in6_ifaddr *)ifa)->ia6_flags &
179			    (IN6_IFF_ANYCAST|IN6_IFF_NOTREADY|IN6_IFF_DETACHED)) {
180				ifa_free(ifa);
181				return (EADDRNOTAVAIL);
182			}
183			if (ifa != NULL)
184				ifa_free(ifa);
185		}
186		if (lport) {
187			struct inpcb *t;
188			struct tcptw *tw;
189
190			/* GROSS */
191			if (ntohs(lport) <= V_ipport_reservedhigh &&
192			    ntohs(lport) >= V_ipport_reservedlow &&
193			    priv_check_cred(cred, PRIV_NETINET_RESERVEDPORT,
194			    0))
195				return (EACCES);
196			if (!IN6_IS_ADDR_MULTICAST(&sin6->sin6_addr) &&
197			    priv_check_cred(inp->inp_cred,
198			    PRIV_NETINET_REUSEPORT, 0) != 0) {
199				t = in6_pcblookup_local(pcbinfo,
200				    &sin6->sin6_addr, lport,
201				    INPLOOKUP_WILDCARD, cred);
202				if (t &&
203				    ((t->inp_flags & INP_TIMEWAIT) == 0) &&
204				    (so->so_type != SOCK_STREAM ||
205				     IN6_IS_ADDR_UNSPECIFIED(&t->in6p_faddr)) &&
206				    (!IN6_IS_ADDR_UNSPECIFIED(&sin6->sin6_addr) ||
207				     !IN6_IS_ADDR_UNSPECIFIED(&t->in6p_laddr) ||
208				     (t->inp_flags2 & INP_REUSEPORT) == 0) &&
209				    (inp->inp_cred->cr_uid !=
210				     t->inp_cred->cr_uid))
211					return (EADDRINUSE);
212#ifdef INET
213				if ((inp->inp_flags & IN6P_IPV6_V6ONLY) == 0 &&
214				    IN6_IS_ADDR_UNSPECIFIED(&sin6->sin6_addr)) {
215					struct sockaddr_in sin;
216
217					in6_sin6_2_sin(&sin, sin6);
218					t = in_pcblookup_local(pcbinfo,
219					    sin.sin_addr, lport,
220					    INPLOOKUP_WILDCARD, cred);
221					if (t &&
222					    ((t->inp_flags &
223					      INP_TIMEWAIT) == 0) &&
224					    (so->so_type != SOCK_STREAM ||
225					     ntohl(t->inp_faddr.s_addr) ==
226					      INADDR_ANY) &&
227					    (inp->inp_cred->cr_uid !=
228					     t->inp_cred->cr_uid))
229						return (EADDRINUSE);
230				}
231#endif
232			}
233			t = in6_pcblookup_local(pcbinfo, &sin6->sin6_addr,
234			    lport, lookupflags, cred);
235			if (t && (t->inp_flags & INP_TIMEWAIT)) {
236				/*
237				 * XXXRW: If an incpb has had its timewait
238				 * state recycled, we treat the address as
239				 * being in use (for now).  This is better
240				 * than a panic, but not desirable.
241				 */
242				tw = intotw(t);
243				if (tw == NULL ||
244				    (reuseport & tw->tw_so_options) == 0)
245					return (EADDRINUSE);
246			} else if (t && (reuseport & inp_so_options(t)) == 0) {
247				return (EADDRINUSE);
248			}
249#ifdef INET
250			if ((inp->inp_flags & IN6P_IPV6_V6ONLY) == 0 &&
251			    IN6_IS_ADDR_UNSPECIFIED(&sin6->sin6_addr)) {
252				struct sockaddr_in sin;
253
254				in6_sin6_2_sin(&sin, sin6);
255				t = in_pcblookup_local(pcbinfo, sin.sin_addr,
256				    lport, lookupflags, cred);
257				if (t && t->inp_flags & INP_TIMEWAIT) {
258					tw = intotw(t);
259					if (tw == NULL)
260						return (EADDRINUSE);
261					if ((reuseport & tw->tw_so_options) == 0
262					    && (ntohl(t->inp_laddr.s_addr) !=
263					     INADDR_ANY || ((inp->inp_vflag &
264					     INP_IPV6PROTO) ==
265					     (t->inp_vflag & INP_IPV6PROTO))))
266						return (EADDRINUSE);
267				} else if (t &&
268				    (reuseport & inp_so_options(t)) == 0 &&
269				    (ntohl(t->inp_laddr.s_addr) != INADDR_ANY ||
270				    (t->inp_vflag & INP_IPV6PROTO) != 0))
271					return (EADDRINUSE);
272			}
273#endif
274		}
275		inp->in6p_laddr = sin6->sin6_addr;
276	}
277	if (lport == 0) {
278		if ((error = in6_pcbsetport(&inp->in6p_laddr, inp, cred)) != 0) {
279			/* Undo an address bind that may have occurred. */
280			inp->in6p_laddr = in6addr_any;
281			return (error);
282		}
283	} else {
284		inp->inp_lport = lport;
285		if (in_pcbinshash(inp) != 0) {
286			inp->in6p_laddr = in6addr_any;
287			inp->inp_lport = 0;
288			return (EAGAIN);
289		}
290	}
291	return (0);
292}
293
294/*
295 *   Transform old in6_pcbconnect() into an inner subroutine for new
296 *   in6_pcbconnect(): Do some validity-checking on the remote
297 *   address (in mbuf 'nam') and then determine local host address
298 *   (i.e., which interface) to use to access that remote host.
299 *
300 *   This preserves definition of in6_pcbconnect(), while supporting a
301 *   slightly different version for T/TCP.  (This is more than
302 *   a bit of a kludge, but cleaning up the internal interfaces would
303 *   have forced minor changes in every protocol).
304 */
305int
306in6_pcbladdr(register struct inpcb *inp, struct sockaddr *nam,
307    struct in6_addr *plocal_addr6)
308{
309	register struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)nam;
310	int error = 0;
311	struct ifnet *ifp = NULL;
312	int scope_ambiguous = 0;
313	struct in6_addr in6a;
314
315	INP_WLOCK_ASSERT(inp);
316	INP_HASH_WLOCK_ASSERT(inp->inp_pcbinfo);	/* XXXRW: why? */
317
318	if (nam->sa_len != sizeof (*sin6))
319		return (EINVAL);
320	if (sin6->sin6_family != AF_INET6)
321		return (EAFNOSUPPORT);
322	if (sin6->sin6_port == 0)
323		return (EADDRNOTAVAIL);
324
325	if (sin6->sin6_scope_id == 0 && !V_ip6_use_defzone)
326		scope_ambiguous = 1;
327	if ((error = sa6_embedscope(sin6, V_ip6_use_defzone)) != 0)
328		return(error);
329
330	if (!TAILQ_EMPTY(&V_in6_ifaddrhead)) {
331		/*
332		 * If the destination address is UNSPECIFIED addr,
333		 * use the loopback addr, e.g ::1.
334		 */
335		if (IN6_IS_ADDR_UNSPECIFIED(&sin6->sin6_addr))
336			sin6->sin6_addr = in6addr_loopback;
337	}
338	if ((error = prison_remote_ip6(inp->inp_cred, &sin6->sin6_addr)) != 0)
339		return (error);
340
341	error = in6_selectsrc(sin6, inp->in6p_outputopts,
342	    inp, NULL, inp->inp_cred, &ifp, &in6a);
343	if (error)
344		return (error);
345
346	if (ifp && scope_ambiguous &&
347	    (error = in6_setscope(&sin6->sin6_addr, ifp, NULL)) != 0) {
348		return(error);
349	}
350
351	/*
352	 * Do not update this earlier, in case we return with an error.
353	 *
354	 * XXX: this in6_selectsrc result might replace the bound local
355	 * address with the address specified by setsockopt(IPV6_PKTINFO).
356	 * Is it the intended behavior?
357	 */
358	*plocal_addr6 = in6a;
359
360	/*
361	 * Don't do pcblookup call here; return interface in
362	 * plocal_addr6
363	 * and exit to caller, that will do the lookup.
364	 */
365
366	return (0);
367}
368
369/*
370 * Outer subroutine:
371 * Connect from a socket to a specified address.
372 * Both address and port must be specified in argument sin.
373 * If don't have a local address for this socket yet,
374 * then pick one.
375 */
376int
377in6_pcbconnect_mbuf(register struct inpcb *inp, struct sockaddr *nam,
378    struct ucred *cred, struct mbuf *m)
379{
380	struct inpcbinfo *pcbinfo = inp->inp_pcbinfo;
381	register struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)nam;
382	struct in6_addr addr6;
383	int error;
384
385	INP_WLOCK_ASSERT(inp);
386	INP_HASH_WLOCK_ASSERT(pcbinfo);
387
388	/*
389	 * Call inner routine, to assign local interface address.
390	 * in6_pcbladdr() may automatically fill in sin6_scope_id.
391	 */
392	if ((error = in6_pcbladdr(inp, nam, &addr6)) != 0)
393		return (error);
394
395	if (in6_pcblookup_hash_locked(pcbinfo, &sin6->sin6_addr,
396			       sin6->sin6_port,
397			      IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_laddr)
398			      ? &addr6 : &inp->in6p_laddr,
399			      inp->inp_lport, 0, NULL) != NULL) {
400		return (EADDRINUSE);
401	}
402	if (IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_laddr)) {
403		if (inp->inp_lport == 0) {
404			error = in6_pcbbind(inp, (struct sockaddr *)0, cred);
405			if (error)
406				return (error);
407		}
408		inp->in6p_laddr = addr6;
409	}
410	inp->in6p_faddr = sin6->sin6_addr;
411	inp->inp_fport = sin6->sin6_port;
412	/* update flowinfo - draft-itojun-ipv6-flowlabel-api-00 */
413	inp->inp_flow &= ~IPV6_FLOWLABEL_MASK;
414	if (inp->inp_flags & IN6P_AUTOFLOWLABEL)
415		inp->inp_flow |=
416		    (htonl(ip6_randomflowlabel()) & IPV6_FLOWLABEL_MASK);
417
418	in_pcbrehash_mbuf(inp, m);
419
420	return (0);
421}
422
423int
424in6_pcbconnect(struct inpcb *inp, struct sockaddr *nam, struct ucred *cred)
425{
426
427	return (in6_pcbconnect_mbuf(inp, nam, cred, NULL));
428}
429
430void
431in6_pcbdisconnect(struct inpcb *inp)
432{
433
434	INP_WLOCK_ASSERT(inp);
435	INP_HASH_WLOCK_ASSERT(inp->inp_pcbinfo);
436
437	bzero((caddr_t)&inp->in6p_faddr, sizeof(inp->in6p_faddr));
438	inp->inp_fport = 0;
439	/* clear flowinfo - draft-itojun-ipv6-flowlabel-api-00 */
440	inp->inp_flow &= ~IPV6_FLOWLABEL_MASK;
441	in_pcbrehash(inp);
442}
443
444struct sockaddr *
445in6_sockaddr(in_port_t port, struct in6_addr *addr_p)
446{
447	struct sockaddr_in6 *sin6;
448
449	sin6 = malloc(sizeof *sin6, M_SONAME, M_WAITOK);
450	bzero(sin6, sizeof *sin6);
451	sin6->sin6_family = AF_INET6;
452	sin6->sin6_len = sizeof(*sin6);
453	sin6->sin6_port = port;
454	sin6->sin6_addr = *addr_p;
455	(void)sa6_recoverscope(sin6); /* XXX: should catch errors */
456
457	return (struct sockaddr *)sin6;
458}
459
460struct sockaddr *
461in6_v4mapsin6_sockaddr(in_port_t port, struct in_addr *addr_p)
462{
463	struct sockaddr_in sin;
464	struct sockaddr_in6 *sin6_p;
465
466	bzero(&sin, sizeof sin);
467	sin.sin_family = AF_INET;
468	sin.sin_len = sizeof(sin);
469	sin.sin_port = port;
470	sin.sin_addr = *addr_p;
471
472	sin6_p = malloc(sizeof *sin6_p, M_SONAME,
473		M_WAITOK);
474	in6_sin_2_v4mapsin6(&sin, sin6_p);
475
476	return (struct sockaddr *)sin6_p;
477}
478
479int
480in6_getsockaddr(struct socket *so, struct sockaddr **nam)
481{
482	register struct inpcb *inp;
483	struct in6_addr addr;
484	in_port_t port;
485
486	inp = sotoinpcb(so);
487	KASSERT(inp != NULL, ("in6_getsockaddr: inp == NULL"));
488
489	INP_RLOCK(inp);
490	port = inp->inp_lport;
491	addr = inp->in6p_laddr;
492	INP_RUNLOCK(inp);
493
494	*nam = in6_sockaddr(port, &addr);
495	return 0;
496}
497
498int
499in6_getpeeraddr(struct socket *so, struct sockaddr **nam)
500{
501	struct inpcb *inp;
502	struct in6_addr addr;
503	in_port_t port;
504
505	inp = sotoinpcb(so);
506	KASSERT(inp != NULL, ("in6_getpeeraddr: inp == NULL"));
507
508	INP_RLOCK(inp);
509	port = inp->inp_fport;
510	addr = inp->in6p_faddr;
511	INP_RUNLOCK(inp);
512
513	*nam = in6_sockaddr(port, &addr);
514	return 0;
515}
516
517int
518in6_mapped_sockaddr(struct socket *so, struct sockaddr **nam)
519{
520	struct	inpcb *inp;
521	int	error;
522
523	inp = sotoinpcb(so);
524	KASSERT(inp != NULL, ("in6_mapped_sockaddr: inp == NULL"));
525
526#ifdef INET
527	if ((inp->inp_vflag & (INP_IPV4 | INP_IPV6)) == INP_IPV4) {
528		error = in_getsockaddr(so, nam);
529		if (error == 0)
530			in6_sin_2_v4mapsin6_in_sock(nam);
531	} else
532#endif
533	{
534		/* scope issues will be handled in in6_getsockaddr(). */
535		error = in6_getsockaddr(so, nam);
536	}
537
538	return error;
539}
540
541int
542in6_mapped_peeraddr(struct socket *so, struct sockaddr **nam)
543{
544	struct	inpcb *inp;
545	int	error;
546
547	inp = sotoinpcb(so);
548	KASSERT(inp != NULL, ("in6_mapped_peeraddr: inp == NULL"));
549
550#ifdef INET
551	if ((inp->inp_vflag & (INP_IPV4 | INP_IPV6)) == INP_IPV4) {
552		error = in_getpeeraddr(so, nam);
553		if (error == 0)
554			in6_sin_2_v4mapsin6_in_sock(nam);
555	} else
556#endif
557	/* scope issues will be handled in in6_getpeeraddr(). */
558	error = in6_getpeeraddr(so, nam);
559
560	return error;
561}
562
563/*
564 * Pass some notification to all connections of a protocol
565 * associated with address dst.  The local address and/or port numbers
566 * may be specified to limit the search.  The "usual action" will be
567 * taken, depending on the ctlinput cmd.  The caller must filter any
568 * cmds that are uninteresting (e.g., no error in the map).
569 * Call the protocol specific routine (if any) to report
570 * any errors for each matching socket.
571 */
572void
573in6_pcbnotify(struct inpcbinfo *pcbinfo, struct sockaddr *dst,
574    u_int fport_arg, const struct sockaddr *src, u_int lport_arg,
575    int cmd, void *cmdarg,
576    struct inpcb *(*notify)(struct inpcb *, int))
577{
578	struct inpcb *inp, *inp_temp;
579	struct sockaddr_in6 sa6_src, *sa6_dst;
580	u_short	fport = fport_arg, lport = lport_arg;
581	u_int32_t flowinfo;
582	int errno;
583
584	if ((unsigned)cmd >= PRC_NCMDS || dst->sa_family != AF_INET6)
585		return;
586
587	sa6_dst = (struct sockaddr_in6 *)dst;
588	if (IN6_IS_ADDR_UNSPECIFIED(&sa6_dst->sin6_addr))
589		return;
590
591	/*
592	 * note that src can be NULL when we get notify by local fragmentation.
593	 */
594	sa6_src = (src == NULL) ? sa6_any : *(const struct sockaddr_in6 *)src;
595	flowinfo = sa6_src.sin6_flowinfo;
596
597	/*
598	 * Redirects go to all references to the destination,
599	 * and use in6_rtchange to invalidate the route cache.
600	 * Dead host indications: also use in6_rtchange to invalidate
601	 * the cache, and deliver the error to all the sockets.
602	 * Otherwise, if we have knowledge of the local port and address,
603	 * deliver only to that socket.
604	 */
605	if (PRC_IS_REDIRECT(cmd) || cmd == PRC_HOSTDEAD) {
606		fport = 0;
607		lport = 0;
608		bzero((caddr_t)&sa6_src.sin6_addr, sizeof(sa6_src.sin6_addr));
609
610		if (cmd != PRC_HOSTDEAD)
611			notify = in6_rtchange;
612	}
613	errno = inet6ctlerrmap[cmd];
614	INP_INFO_WLOCK(pcbinfo);
615	LIST_FOREACH_SAFE(inp, pcbinfo->ipi_listhead, inp_list, inp_temp) {
616		INP_WLOCK(inp);
617		if ((inp->inp_vflag & INP_IPV6) == 0) {
618			INP_WUNLOCK(inp);
619			continue;
620		}
621
622		/*
623		 * If the error designates a new path MTU for a destination
624		 * and the application (associated with this socket) wanted to
625		 * know the value, notify. Note that we notify for all
626		 * disconnected sockets if the corresponding application
627		 * wanted. This is because some UDP applications keep sending
628		 * sockets disconnected.
629		 * XXX: should we avoid to notify the value to TCP sockets?
630		 */
631		if (cmd == PRC_MSGSIZE && (inp->inp_flags & IN6P_MTU) != 0 &&
632		    (IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr) ||
633		     IN6_ARE_ADDR_EQUAL(&inp->in6p_faddr, &sa6_dst->sin6_addr))) {
634			ip6_notify_pmtu(inp, (struct sockaddr_in6 *)dst,
635					(u_int32_t *)cmdarg);
636		}
637
638		/*
639		 * Detect if we should notify the error. If no source and
640		 * destination ports are specifed, but non-zero flowinfo and
641		 * local address match, notify the error. This is the case
642		 * when the error is delivered with an encrypted buffer
643		 * by ESP. Otherwise, just compare addresses and ports
644		 * as usual.
645		 */
646		if (lport == 0 && fport == 0 && flowinfo &&
647		    inp->inp_socket != NULL &&
648		    flowinfo == (inp->inp_flow & IPV6_FLOWLABEL_MASK) &&
649		    IN6_ARE_ADDR_EQUAL(&inp->in6p_laddr, &sa6_src.sin6_addr))
650			goto do_notify;
651		else if (!IN6_ARE_ADDR_EQUAL(&inp->in6p_faddr,
652					     &sa6_dst->sin6_addr) ||
653			 inp->inp_socket == 0 ||
654			 (lport && inp->inp_lport != lport) ||
655			 (!IN6_IS_ADDR_UNSPECIFIED(&sa6_src.sin6_addr) &&
656			  !IN6_ARE_ADDR_EQUAL(&inp->in6p_laddr,
657					      &sa6_src.sin6_addr)) ||
658			 (fport && inp->inp_fport != fport)) {
659			INP_WUNLOCK(inp);
660			continue;
661		}
662
663	  do_notify:
664		if (notify) {
665			if ((*notify)(inp, errno))
666				INP_WUNLOCK(inp);
667		} else
668			INP_WUNLOCK(inp);
669	}
670	INP_INFO_WUNLOCK(pcbinfo);
671}
672
673/*
674 * Lookup a PCB based on the local address and port.  Caller must hold the
675 * hash lock.  No inpcb locks or references are acquired.
676 */
677struct inpcb *
678in6_pcblookup_local(struct inpcbinfo *pcbinfo, struct in6_addr *laddr,
679    u_short lport, int lookupflags, struct ucred *cred)
680{
681	register struct inpcb *inp;
682	int matchwild = 3, wildcard;
683
684	KASSERT((lookupflags & ~(INPLOOKUP_WILDCARD)) == 0,
685	    ("%s: invalid lookup flags %d", __func__, lookupflags));
686
687	INP_HASH_WLOCK_ASSERT(pcbinfo);
688
689	if ((lookupflags & INPLOOKUP_WILDCARD) == 0) {
690		struct inpcbhead *head;
691		/*
692		 * Look for an unconnected (wildcard foreign addr) PCB that
693		 * matches the local address and port we're looking for.
694		 */
695		head = &pcbinfo->ipi_hashbase[INP_PCBHASH(INADDR_ANY, lport,
696		    0, pcbinfo->ipi_hashmask)];
697		LIST_FOREACH(inp, head, inp_hash) {
698			/* XXX inp locking */
699			if ((inp->inp_vflag & INP_IPV6) == 0)
700				continue;
701			if (IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr) &&
702			    IN6_ARE_ADDR_EQUAL(&inp->in6p_laddr, laddr) &&
703			    inp->inp_lport == lport) {
704				/* Found. */
705				if (cred == NULL ||
706				    prison_equal_ip6(cred->cr_prison,
707					inp->inp_cred->cr_prison))
708					return (inp);
709			}
710		}
711		/*
712		 * Not found.
713		 */
714		return (NULL);
715	} else {
716		struct inpcbporthead *porthash;
717		struct inpcbport *phd;
718		struct inpcb *match = NULL;
719		/*
720		 * Best fit PCB lookup.
721		 *
722		 * First see if this local port is in use by looking on the
723		 * port hash list.
724		 */
725		porthash = &pcbinfo->ipi_porthashbase[INP_PCBPORTHASH(lport,
726		    pcbinfo->ipi_porthashmask)];
727		LIST_FOREACH(phd, porthash, phd_hash) {
728			if (phd->phd_port == lport)
729				break;
730		}
731		if (phd != NULL) {
732			/*
733			 * Port is in use by one or more PCBs. Look for best
734			 * fit.
735			 */
736			LIST_FOREACH(inp, &phd->phd_pcblist, inp_portlist) {
737				wildcard = 0;
738				if (cred != NULL &&
739				    !prison_equal_ip6(cred->cr_prison,
740					inp->inp_cred->cr_prison))
741					continue;
742				/* XXX inp locking */
743				if ((inp->inp_vflag & INP_IPV6) == 0)
744					continue;
745				if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr))
746					wildcard++;
747				if (!IN6_IS_ADDR_UNSPECIFIED(
748					&inp->in6p_laddr)) {
749					if (IN6_IS_ADDR_UNSPECIFIED(laddr))
750						wildcard++;
751					else if (!IN6_ARE_ADDR_EQUAL(
752					    &inp->in6p_laddr, laddr))
753						continue;
754				} else {
755					if (!IN6_IS_ADDR_UNSPECIFIED(laddr))
756						wildcard++;
757				}
758				if (wildcard < matchwild) {
759					match = inp;
760					matchwild = wildcard;
761					if (matchwild == 0)
762						break;
763				}
764			}
765		}
766		return (match);
767	}
768}
769
770void
771in6_pcbpurgeif0(struct inpcbinfo *pcbinfo, struct ifnet *ifp)
772{
773	struct inpcb *in6p;
774	struct ip6_moptions *im6o;
775	int i, gap;
776
777	INP_INFO_RLOCK(pcbinfo);
778	LIST_FOREACH(in6p, pcbinfo->ipi_listhead, inp_list) {
779		INP_WLOCK(in6p);
780		im6o = in6p->in6p_moptions;
781		if ((in6p->inp_vflag & INP_IPV6) && im6o != NULL) {
782			/*
783			 * Unselect the outgoing ifp for multicast if it
784			 * is being detached.
785			 */
786			if (im6o->im6o_multicast_ifp == ifp)
787				im6o->im6o_multicast_ifp = NULL;
788			/*
789			 * Drop multicast group membership if we joined
790			 * through the interface being detached.
791			 */
792			gap = 0;
793			for (i = 0; i < im6o->im6o_num_memberships; i++) {
794				if (im6o->im6o_membership[i]->in6m_ifp ==
795				    ifp) {
796					in6_mc_leave(im6o->im6o_membership[i],
797					    NULL);
798					gap++;
799				} else if (gap != 0) {
800					im6o->im6o_membership[i - gap] =
801					    im6o->im6o_membership[i];
802				}
803			}
804			im6o->im6o_num_memberships -= gap;
805		}
806		INP_WUNLOCK(in6p);
807	}
808	INP_INFO_RUNLOCK(pcbinfo);
809}
810
811/*
812 * Check for alternatives when higher level complains
813 * about service problems.  For now, invalidate cached
814 * routing information.  If the route was created dynamically
815 * (by a redirect), time to try a default gateway again.
816 */
817void
818in6_losing(struct inpcb *in6p)
819{
820
821	/*
822	 * We don't store route pointers in the routing table anymore
823	 */
824	return;
825}
826
827/*
828 * After a routing change, flush old routing
829 * and allocate a (hopefully) better one.
830 */
831struct inpcb *
832in6_rtchange(struct inpcb *inp, int errno)
833{
834	/*
835	 * We don't store route pointers in the routing table anymore
836	 */
837	return inp;
838}
839
840#ifdef PCBGROUP
841/*
842 * Lookup PCB in hash list, using pcbgroup tables.
843 */
844static struct inpcb *
845in6_pcblookup_group(struct inpcbinfo *pcbinfo, struct inpcbgroup *pcbgroup,
846    struct in6_addr *faddr, u_int fport_arg, struct in6_addr *laddr,
847    u_int lport_arg, int lookupflags, struct ifnet *ifp)
848{
849	struct inpcbhead *head;
850	struct inpcb *inp, *tmpinp;
851	u_short fport = fport_arg, lport = lport_arg;
852	int faith;
853
854	if (faithprefix_p != NULL)
855		faith = (*faithprefix_p)(laddr);
856	else
857		faith = 0;
858
859	/*
860	 * First look for an exact match.
861	 */
862	tmpinp = NULL;
863	INP_GROUP_LOCK(pcbgroup);
864	head = &pcbgroup->ipg_hashbase[
865	    INP_PCBHASH(faddr->s6_addr32[3] /* XXX */, lport, fport,
866	    pcbgroup->ipg_hashmask)];
867	LIST_FOREACH(inp, head, inp_pcbgrouphash) {
868		/* XXX inp locking */
869		if ((inp->inp_vflag & INP_IPV6) == 0)
870			continue;
871		if (IN6_ARE_ADDR_EQUAL(&inp->in6p_faddr, faddr) &&
872		    IN6_ARE_ADDR_EQUAL(&inp->in6p_laddr, laddr) &&
873		    inp->inp_fport == fport &&
874		    inp->inp_lport == lport) {
875			/*
876			 * XXX We should be able to directly return
877			 * the inp here, without any checks.
878			 * Well unless both bound with SO_REUSEPORT?
879			 */
880			if (prison_flag(inp->inp_cred, PR_IP6))
881				goto found;
882			if (tmpinp == NULL)
883				tmpinp = inp;
884		}
885	}
886	if (tmpinp != NULL) {
887		inp = tmpinp;
888		goto found;
889	}
890
891	/*
892	 * Then look for a wildcard match, if requested.
893	 */
894	if ((lookupflags & INPLOOKUP_WILDCARD) != 0) {
895		struct inpcb *local_wild = NULL, *local_exact = NULL;
896		struct inpcb *jail_wild = NULL;
897		int injail;
898
899		/*
900		 * Order of socket selection - we always prefer jails.
901		 *      1. jailed, non-wild.
902		 *      2. jailed, wild.
903		 *      3. non-jailed, non-wild.
904		 *      4. non-jailed, wild.
905		 */
906		head = &pcbinfo->ipi_wildbase[INP_PCBHASH(INADDR_ANY, lport,
907		    0, pcbinfo->ipi_wildmask)];
908		LIST_FOREACH(inp, head, inp_pcbgroup_wild) {
909			/* XXX inp locking */
910			if ((inp->inp_vflag & INP_IPV6) == 0)
911				continue;
912
913			if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr) ||
914			    inp->inp_lport != lport) {
915				continue;
916			}
917
918			/* XXX inp locking */
919			if (faith && (inp->inp_flags & INP_FAITH) == 0)
920				continue;
921
922			injail = prison_flag(inp->inp_cred, PR_IP6);
923			if (injail) {
924				if (prison_check_ip6(inp->inp_cred,
925				    laddr) != 0)
926					continue;
927			} else {
928				if (local_exact != NULL)
929					continue;
930			}
931
932			if (IN6_ARE_ADDR_EQUAL(&inp->in6p_laddr, laddr)) {
933				if (injail)
934					goto found;
935				else
936					local_exact = inp;
937			} else if (IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_laddr)) {
938				if (injail)
939					jail_wild = inp;
940				else
941					local_wild = inp;
942			}
943		} /* LIST_FOREACH */
944
945		inp = jail_wild;
946		if (inp == NULL)
947			inp = jail_wild;
948		if (inp == NULL)
949			inp = local_exact;
950		if (inp == NULL)
951			inp = local_wild;
952		if (inp != NULL)
953			goto found;
954	} /* if ((lookupflags & INPLOOKUP_WILDCARD) != 0) */
955	INP_GROUP_UNLOCK(pcbgroup);
956	return (NULL);
957
958found:
959	in_pcbref(inp);
960	INP_GROUP_UNLOCK(pcbgroup);
961	if (lookupflags & INPLOOKUP_WLOCKPCB) {
962		INP_WLOCK(inp);
963		if (in_pcbrele_wlocked(inp))
964			return (NULL);
965	} else if (lookupflags & INPLOOKUP_RLOCKPCB) {
966		INP_RLOCK(inp);
967		if (in_pcbrele_rlocked(inp))
968			return (NULL);
969	} else
970		panic("%s: locking buf", __func__);
971	return (inp);
972}
973#endif /* PCBGROUP */
974
975/*
976 * Lookup PCB in hash list.
977 */
978struct inpcb *
979in6_pcblookup_hash_locked(struct inpcbinfo *pcbinfo, struct in6_addr *faddr,
980    u_int fport_arg, struct in6_addr *laddr, u_int lport_arg,
981    int lookupflags, struct ifnet *ifp)
982{
983	struct inpcbhead *head;
984	struct inpcb *inp, *tmpinp;
985	u_short fport = fport_arg, lport = lport_arg;
986	int faith;
987
988	KASSERT((lookupflags & ~(INPLOOKUP_WILDCARD)) == 0,
989	    ("%s: invalid lookup flags %d", __func__, lookupflags));
990
991	INP_HASH_LOCK_ASSERT(pcbinfo);
992
993	if (faithprefix_p != NULL)
994		faith = (*faithprefix_p)(laddr);
995	else
996		faith = 0;
997
998	/*
999	 * First look for an exact match.
1000	 */
1001	tmpinp = NULL;
1002	head = &pcbinfo->ipi_hashbase[
1003	    INP_PCBHASH(faddr->s6_addr32[3] /* XXX */, lport, fport,
1004	    pcbinfo->ipi_hashmask)];
1005	LIST_FOREACH(inp, head, inp_hash) {
1006		/* XXX inp locking */
1007		if ((inp->inp_vflag & INP_IPV6) == 0)
1008			continue;
1009		if (IN6_ARE_ADDR_EQUAL(&inp->in6p_faddr, faddr) &&
1010		    IN6_ARE_ADDR_EQUAL(&inp->in6p_laddr, laddr) &&
1011		    inp->inp_fport == fport &&
1012		    inp->inp_lport == lport) {
1013			/*
1014			 * XXX We should be able to directly return
1015			 * the inp here, without any checks.
1016			 * Well unless both bound with SO_REUSEPORT?
1017			 */
1018			if (prison_flag(inp->inp_cred, PR_IP6))
1019				return (inp);
1020			if (tmpinp == NULL)
1021				tmpinp = inp;
1022		}
1023	}
1024	if (tmpinp != NULL)
1025		return (tmpinp);
1026
1027	/*
1028	 * Then look for a wildcard match, if requested.
1029	 */
1030	if ((lookupflags & INPLOOKUP_WILDCARD) != 0) {
1031		struct inpcb *local_wild = NULL, *local_exact = NULL;
1032		struct inpcb *jail_wild = NULL;
1033		int injail;
1034
1035		/*
1036		 * Order of socket selection - we always prefer jails.
1037		 *      1. jailed, non-wild.
1038		 *      2. jailed, wild.
1039		 *      3. non-jailed, non-wild.
1040		 *      4. non-jailed, wild.
1041		 */
1042		head = &pcbinfo->ipi_hashbase[INP_PCBHASH(INADDR_ANY, lport,
1043		    0, pcbinfo->ipi_hashmask)];
1044		LIST_FOREACH(inp, head, inp_hash) {
1045			/* XXX inp locking */
1046			if ((inp->inp_vflag & INP_IPV6) == 0)
1047				continue;
1048
1049			if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr) ||
1050			    inp->inp_lport != lport) {
1051				continue;
1052			}
1053
1054			/* XXX inp locking */
1055			if (faith && (inp->inp_flags & INP_FAITH) == 0)
1056				continue;
1057
1058			injail = prison_flag(inp->inp_cred, PR_IP6);
1059			if (injail) {
1060				if (prison_check_ip6(inp->inp_cred,
1061				    laddr) != 0)
1062					continue;
1063			} else {
1064				if (local_exact != NULL)
1065					continue;
1066			}
1067
1068			if (IN6_ARE_ADDR_EQUAL(&inp->in6p_laddr, laddr)) {
1069				if (injail)
1070					return (inp);
1071				else
1072					local_exact = inp;
1073			} else if (IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_laddr)) {
1074				if (injail)
1075					jail_wild = inp;
1076				else
1077					local_wild = inp;
1078			}
1079		} /* LIST_FOREACH */
1080
1081		if (jail_wild != NULL)
1082			return (jail_wild);
1083		if (local_exact != NULL)
1084			return (local_exact);
1085		if (local_wild != NULL)
1086			return (local_wild);
1087	} /* if ((lookupflags & INPLOOKUP_WILDCARD) != 0) */
1088
1089	/*
1090	 * Not found.
1091	 */
1092	return (NULL);
1093}
1094
1095/*
1096 * Lookup PCB in hash list, using pcbinfo tables.  This variation locks the
1097 * hash list lock, and will return the inpcb locked (i.e., requires
1098 * INPLOOKUP_LOCKPCB).
1099 */
1100static struct inpcb *
1101in6_pcblookup_hash(struct inpcbinfo *pcbinfo, struct in6_addr *faddr,
1102    u_int fport, struct in6_addr *laddr, u_int lport, int lookupflags,
1103    struct ifnet *ifp)
1104{
1105	struct inpcb *inp;
1106
1107	INP_HASH_RLOCK(pcbinfo);
1108	inp = in6_pcblookup_hash_locked(pcbinfo, faddr, fport, laddr, lport,
1109	    (lookupflags & ~(INPLOOKUP_RLOCKPCB | INPLOOKUP_WLOCKPCB)), ifp);
1110	if (inp != NULL) {
1111		in_pcbref(inp);
1112		INP_HASH_RUNLOCK(pcbinfo);
1113		if (lookupflags & INPLOOKUP_WLOCKPCB) {
1114			INP_WLOCK(inp);
1115			if (in_pcbrele_wlocked(inp))
1116				return (NULL);
1117		} else if (lookupflags & INPLOOKUP_RLOCKPCB) {
1118			INP_RLOCK(inp);
1119			if (in_pcbrele_rlocked(inp))
1120				return (NULL);
1121		} else
1122			panic("%s: locking bug", __func__);
1123	} else
1124		INP_HASH_RUNLOCK(pcbinfo);
1125	return (inp);
1126}
1127
1128/*
1129 * Public inpcb lookup routines, accepting a 4-tuple, and optionally, an mbuf
1130 * from which a pre-calculated hash value may be extracted.
1131 *
1132 * Possibly more of this logic should be in in6_pcbgroup.c.
1133 */
1134struct inpcb *
1135in6_pcblookup(struct inpcbinfo *pcbinfo, struct in6_addr *faddr, u_int fport,
1136    struct in6_addr *laddr, u_int lport, int lookupflags, struct ifnet *ifp)
1137{
1138#if defined(PCBGROUP)
1139	struct inpcbgroup *pcbgroup;
1140#endif
1141
1142	KASSERT((lookupflags & ~INPLOOKUP_MASK) == 0,
1143	    ("%s: invalid lookup flags %d", __func__, lookupflags));
1144	KASSERT((lookupflags & (INPLOOKUP_RLOCKPCB | INPLOOKUP_WLOCKPCB)) != 0,
1145	    ("%s: LOCKPCB not set", __func__));
1146
1147#if defined(PCBGROUP)
1148	if (in_pcbgroup_enabled(pcbinfo)) {
1149		pcbgroup = in6_pcbgroup_bytuple(pcbinfo, laddr, lport, faddr,
1150		    fport);
1151		return (in6_pcblookup_group(pcbinfo, pcbgroup, faddr, fport,
1152		    laddr, lport, lookupflags, ifp));
1153	}
1154#endif
1155	return (in6_pcblookup_hash(pcbinfo, faddr, fport, laddr, lport,
1156	    lookupflags, ifp));
1157}
1158
1159struct inpcb *
1160in6_pcblookup_mbuf(struct inpcbinfo *pcbinfo, struct in6_addr *faddr,
1161    u_int fport, struct in6_addr *laddr, u_int lport, int lookupflags,
1162    struct ifnet *ifp, struct mbuf *m)
1163{
1164#ifdef PCBGROUP
1165	struct inpcbgroup *pcbgroup;
1166#endif
1167
1168	KASSERT((lookupflags & ~INPLOOKUP_MASK) == 0,
1169	    ("%s: invalid lookup flags %d", __func__, lookupflags));
1170	KASSERT((lookupflags & (INPLOOKUP_RLOCKPCB | INPLOOKUP_WLOCKPCB)) != 0,
1171	    ("%s: LOCKPCB not set", __func__));
1172
1173#ifdef PCBGROUP
1174	if (in_pcbgroup_enabled(pcbinfo)) {
1175		pcbgroup = in6_pcbgroup_byhash(pcbinfo, M_HASHTYPE_GET(m),
1176		    m->m_pkthdr.flowid);
1177		if (pcbgroup != NULL)
1178			return (in6_pcblookup_group(pcbinfo, pcbgroup, faddr,
1179			    fport, laddr, lport, lookupflags, ifp));
1180		pcbgroup = in6_pcbgroup_bytuple(pcbinfo, laddr, lport, faddr,
1181		    fport);
1182		return (in6_pcblookup_group(pcbinfo, pcbgroup, faddr, fport,
1183		    laddr, lport, lookupflags, ifp));
1184	}
1185#endif
1186	return (in6_pcblookup_hash(pcbinfo, faddr, fport, laddr, lport,
1187	    lookupflags, ifp));
1188}
1189
1190void
1191init_sin6(struct sockaddr_in6 *sin6, struct mbuf *m)
1192{
1193	struct ip6_hdr *ip;
1194
1195	ip = mtod(m, struct ip6_hdr *);
1196	bzero(sin6, sizeof(*sin6));
1197	sin6->sin6_len = sizeof(*sin6);
1198	sin6->sin6_family = AF_INET6;
1199	sin6->sin6_addr = ip->ip6_src;
1200
1201	(void)sa6_recoverscope(sin6); /* XXX: should catch errors... */
1202
1203	return;
1204}
1205