ieee80211_var.h revision 147794
1/*-
2 * Copyright (c) 2001 Atsushi Onoe
3 * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting
4 * All rights reserved.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
8 * are met:
9 * 1. Redistributions of source code must retain the above copyright
10 *    notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 *    notice, this list of conditions and the following disclaimer in the
13 *    documentation and/or other materials provided with the distribution.
14 * 3. The name of the author may not be used to endorse or promote products
15 *    derived from this software without specific prior written permission.
16 *
17 * Alternatively, this software may be distributed under the terms of the
18 * GNU General Public License ("GPL") version 2 as published by the Free
19 * Software Foundation.
20 *
21 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
22 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
23 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
24 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
25 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
26 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
27 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
28 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
29 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
30 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
31 *
32 * $FreeBSD: head/sys/net80211/ieee80211_var.h 147794 2005-07-06 15:38:27Z sam $
33 */
34#ifndef _NET80211_IEEE80211_VAR_H_
35#define _NET80211_IEEE80211_VAR_H_
36
37/*
38 * Definitions for IEEE 802.11 drivers.
39 */
40#define	IEEE80211_DEBUG
41#undef	IEEE80211_DEBUG_REFCNT			/* node refcnt stuff */
42
43/* NB: portability glue must go first */
44#ifdef __NetBSD__
45#include <net80211/ieee80211_netbsd.h>
46#elif __FreeBSD__
47#include <net80211/ieee80211_freebsd.h>
48#elif __linux__
49#include <net80211/ieee80211_linux.h>
50#else
51#error	"No support for your operating system!"
52#endif
53
54#include <net80211/_ieee80211.h>
55#include <net80211/ieee80211.h>
56#include <net80211/ieee80211_crypto.h>
57#include <net80211/ieee80211_ioctl.h>		/* for ieee80211_stats */
58#include <net80211/ieee80211_node.h>
59#include <net80211/ieee80211_proto.h>
60
61#define	IEEE80211_TXPOWER_MAX	100	/* .5 dbM (XXX units?) */
62#define	IEEE80211_TXPOWER_MIN	0	/* kill radio */
63
64#define	IEEE80211_DTIM_MAX	15	/* max DTIM period */
65#define	IEEE80211_DTIM_MIN	1	/* min DTIM period */
66#define	IEEE80211_DTIM_DEFAULT	1	/* default DTIM period */
67
68#define	IEEE80211_BINTVAL_MAX	500	/* max beacon interval (TU's) */
69#define	IEEE80211_BINTVAL_MIN	25	/* min beacon interval (TU's) */
70#define	IEEE80211_BINTVAL_DEFAULT 100	/* default beacon interval (TU's) */
71
72#define	IEEE80211_PS_SLEEP	0x1	/* STA is in power saving mode */
73#define	IEEE80211_PS_MAX_QUEUE	50	/* maximum saved packets */
74
75#define	IEEE80211_MS_TO_TU(x)	(((x) * 1000) / 1024)
76#define	IEEE80211_TU_TO_MS(x)	(((x) * 1024) / 1000)
77
78struct ieee80211_aclator;
79struct sysctl_ctx_list;
80
81struct ieee80211com {
82	SLIST_ENTRY(ieee80211com) ic_next;
83	struct ifnet		*ic_ifp;	/* associated device */
84	struct ieee80211_stats	ic_stats;	/* statistics */
85	struct sysctl_ctx_list	*ic_sysctl;	/* dynamic sysctl context */
86	u_int32_t		ic_debug;	/* debug msg flags */
87	int			ic_vap;		/* virtual AP index */
88	ieee80211_beacon_lock_t	ic_beaconlock;	/* beacon update lock */
89
90	int			(*ic_reset)(struct ifnet *);
91	void			(*ic_recv_mgmt)(struct ieee80211com *,
92				    struct mbuf *, struct ieee80211_node *,
93				    int, int, u_int32_t);
94	int			(*ic_send_mgmt)(struct ieee80211com *,
95				    struct ieee80211_node *, int, int);
96	int			(*ic_newstate)(struct ieee80211com *,
97				    enum ieee80211_state, int);
98	void			(*ic_newassoc)(struct ieee80211com *,
99				    struct ieee80211_node *, int);
100	void			(*ic_updateslot)(struct ifnet *);
101	void			(*ic_set_tim)(struct ieee80211com *,
102				    struct ieee80211_node *, int);
103	u_int8_t		ic_myaddr[IEEE80211_ADDR_LEN];
104	struct ieee80211_rateset ic_sup_rates[IEEE80211_MODE_MAX];
105	struct ieee80211_channel ic_channels[IEEE80211_CHAN_MAX+1];
106	u_int8_t		ic_chan_avail[IEEE80211_CHAN_BYTES];
107	u_int8_t		ic_chan_active[IEEE80211_CHAN_BYTES];
108	u_int8_t		ic_chan_scan[IEEE80211_CHAN_BYTES];
109	struct ieee80211_node_table ic_scan;	/* scan candidates */
110	struct ifqueue		ic_mgtq;
111	u_int32_t		ic_flags;	/* state flags */
112	u_int32_t		ic_caps;	/* capabilities */
113	u_int16_t		ic_modecaps;	/* set of mode capabilities */
114	u_int16_t		ic_curmode;	/* current mode */
115	enum ieee80211_phytype	ic_phytype;	/* XXX wrong for multi-mode */
116	enum ieee80211_opmode	ic_opmode;	/* operation mode */
117	enum ieee80211_state	ic_state;	/* 802.11 state */
118	enum ieee80211_protmode	ic_protmode;	/* 802.11g protection mode */
119	enum ieee80211_roamingmode ic_roaming;	/* roaming mode */
120	struct ieee80211_node_table ic_sta;	/* stations/neighbors */
121	u_int32_t		*ic_aid_bitmap;	/* association id map */
122	u_int16_t		ic_max_aid;
123	u_int16_t		ic_sta_assoc;	/* stations associated */
124	u_int16_t		ic_ps_sta;	/* stations in power save */
125	u_int16_t		ic_ps_pending;	/* ps sta's w/ pending frames */
126	u_int8_t		*ic_tim_bitmap;	/* power-save stations w/ data*/
127	u_int16_t		ic_tim_len;	/* ic_tim_bitmap size (bytes) */
128	u_int8_t		ic_dtim_period;	/* DTIM period */
129	u_int8_t		ic_dtim_count;	/* DTIM count for last bcn */
130	struct ifmedia		ic_media;	/* interface media config */
131	struct bpf_if		*ic_rawbpf;	/* packet filter structure */
132	struct ieee80211_node	*ic_bss;	/* information for this node */
133	struct ieee80211_channel *ic_ibss_chan;
134	int			ic_fixed_rate;	/* index to ic_sup_rates[] */
135	u_int16_t		ic_rtsthreshold;
136	u_int16_t		ic_fragthreshold;
137	struct ieee80211_node	*(*ic_node_alloc)(struct ieee80211_node_table*);
138	void			(*ic_node_free)(struct ieee80211_node *);
139	void			(*ic_node_cleanup)(struct ieee80211_node *);
140	u_int8_t		(*ic_node_getrssi)(const struct ieee80211_node*);
141	u_int16_t		ic_lintval;	/* listen interval */
142	u_int16_t		ic_holdover;	/* PM hold over duration */
143	u_int16_t		ic_txmin;	/* min tx retry count */
144	u_int16_t		ic_txmax;	/* max tx retry count */
145	u_int16_t		ic_txlifetime;	/* tx lifetime */
146	u_int16_t		ic_txpowlimit;	/* global tx power limit */
147	u_int16_t		ic_bmisstimeout;/* beacon miss threshold (ms) */
148	u_int16_t		ic_nonerpsta;	/* # non-ERP stations */
149	u_int16_t		ic_longslotsta;	/* # long slot time stations */
150	int			ic_mgt_timer;	/* mgmt timeout */
151	int			ic_inact_timer;	/* inactivity timer wait */
152	int			ic_des_esslen;
153	u_int8_t		ic_des_essid[IEEE80211_NWID_LEN];
154	struct ieee80211_channel *ic_des_chan;	/* desired channel */
155	u_int8_t		ic_des_bssid[IEEE80211_ADDR_LEN];
156	void			*ic_opt_ie;	/* user-specified IE's */
157	u_int16_t		ic_opt_ie_len;	/* length of ni_opt_ie */
158	/*
159	 * Inactivity timer settings for nodes.
160	 */
161	int			ic_inact_init;	/* initial setting */
162	int			ic_inact_auth;	/* auth but not assoc setting */
163	int			ic_inact_run;	/* authorized setting */
164	int			ic_inact_probe;	/* inactive probe time */
165
166	/*
167	 * WME/WMM state.
168	 */
169	struct ieee80211_wme_state ic_wme;
170
171	/*
172	 * Cipher state/configuration.
173	 */
174	struct ieee80211_crypto_state ic_crypto;
175#define	ic_nw_keys	ic_crypto.cs_nw_keys	/* XXX compatibility */
176#define	ic_def_txkey	ic_crypto.cs_def_txkey	/* XXX compatibility */
177
178	/*
179	 * 802.1x glue.  When an authenticator attaches it
180	 * fills in this section.  We assume that when ic_ec
181	 * is setup that the methods are safe to call.
182	 */
183	const struct ieee80211_authenticator *ic_auth;
184	struct eapolcom		*ic_ec;
185
186	/*
187	 * Access control glue.  When a control agent attaches
188	 * it fills in this section.  We assume that when ic_ac
189	 * is setup that the methods are safe to call.
190	 */
191	const struct ieee80211_aclator *ic_acl;
192	void			*ic_as;
193};
194
195#define	IEEE80211_ADDR_EQ(a1,a2)	(memcmp(a1,a2,IEEE80211_ADDR_LEN) == 0)
196#define	IEEE80211_ADDR_COPY(dst,src)	memcpy(dst,src,IEEE80211_ADDR_LEN)
197
198/* ic_flags */
199/* NB: bits 0x4f available */
200/* NB: this is intentionally setup to be IEEE80211_CAPINFO_PRIVACY */
201#define	IEEE80211_F_PRIVACY	0x00000010	/* CONF: privacy enabled */
202#define	IEEE80211_F_PUREG	0x00000020	/* CONF: 11g w/o 11b sta's */
203#define	IEEE80211_F_SCAN	0x00000080	/* STATUS: scanning */
204#define	IEEE80211_F_ASCAN	0x00000100	/* STATUS: active scan */
205#define	IEEE80211_F_SIBSS	0x00000200	/* STATUS: start IBSS */
206/* NB: this is intentionally setup to be IEEE80211_CAPINFO_SHORT_SLOTTIME */
207#define	IEEE80211_F_SHSLOT	0x00000400	/* STATUS: use short slot time*/
208#define	IEEE80211_F_PMGTON	0x00000800	/* CONF: Power mgmt enable */
209#define	IEEE80211_F_DESBSSID	0x00001000	/* CONF: des_bssid is set */
210#define	IEEE80211_F_WME		0x00002000	/* CONF: enable WME use */
211#define	IEEE80211_F_ROAMING	0x00004000	/* CONF: roaming enabled (???)*/
212#define	IEEE80211_F_SWRETRY	0x00008000	/* CONF: sw tx retry enabled */
213#define IEEE80211_F_TXPOW_FIXED	0x00010000	/* TX Power: fixed rate */
214#define	IEEE80211_F_IBSSON	0x00020000	/* CONF: IBSS creation enable */
215#define	IEEE80211_F_SHPREAMBLE	0x00040000	/* STATUS: use short preamble */
216#define	IEEE80211_F_DATAPAD	0x00080000	/* CONF: do alignment pad */
217#define	IEEE80211_F_USEPROT	0x00100000	/* STATUS: protection enabled */
218#define	IEEE80211_F_USEBARKER	0x00200000	/* STATUS: use barker preamble*/
219#define	IEEE80211_F_TIMUPDATE	0x00400000	/* STATUS: update beacon tim */
220#define	IEEE80211_F_WPA1	0x00800000	/* CONF: WPA enabled */
221#define	IEEE80211_F_WPA2	0x01000000	/* CONF: WPA2 enabled */
222#define	IEEE80211_F_WPA		0x01800000	/* CONF: WPA/WPA2 enabled */
223#define	IEEE80211_F_DROPUNENC	0x02000000	/* CONF: drop unencrypted */
224#define	IEEE80211_F_COUNTERM	0x04000000	/* CONF: TKIP countermeasures */
225#define	IEEE80211_F_HIDESSID	0x08000000	/* CONF: hide SSID in beacon */
226#define	IEEE80211_F_NOBRIDGE	0x10000000	/* CONF: dis. internal bridge */
227#define	IEEE80211_F_WMEUPDATE	0x20000000	/* STATUS: update beacon wme */
228
229/* ic_caps */
230#define	IEEE80211_C_WEP		0x00000001	/* CAPABILITY: WEP available */
231#define	IEEE80211_C_TKIP	0x00000002	/* CAPABILITY: TKIP available */
232#define	IEEE80211_C_AES		0x00000004	/* CAPABILITY: AES OCB avail */
233#define	IEEE80211_C_AES_CCM	0x00000008	/* CAPABILITY: AES CCM avail */
234#define	IEEE80211_C_CKIP	0x00000020	/* CAPABILITY: CKIP available */
235#define	IEEE80211_C_IBSS	0x00000100	/* CAPABILITY: IBSS available */
236#define	IEEE80211_C_PMGT	0x00000200	/* CAPABILITY: Power mgmt */
237#define	IEEE80211_C_HOSTAP	0x00000400	/* CAPABILITY: HOSTAP avail */
238#define	IEEE80211_C_AHDEMO	0x00000800	/* CAPABILITY: Old Adhoc Demo */
239#define	IEEE80211_C_SWRETRY	0x00001000	/* CAPABILITY: sw tx retry */
240#define	IEEE80211_C_TXPMGT	0x00002000	/* CAPABILITY: tx power mgmt */
241#define	IEEE80211_C_SHSLOT	0x00004000	/* CAPABILITY: short slottime */
242#define	IEEE80211_C_SHPREAMBLE	0x00008000	/* CAPABILITY: short preamble */
243#define	IEEE80211_C_MONITOR	0x00010000	/* CAPABILITY: monitor mode */
244#define	IEEE80211_C_TKIPMIC	0x00020000	/* CAPABILITY: TKIP MIC avail */
245#define	IEEE80211_C_WPA1	0x00800000	/* CAPABILITY: WPA1 avail */
246#define	IEEE80211_C_WPA2	0x01000000	/* CAPABILITY: WPA2 avail */
247#define	IEEE80211_C_WPA		0x01800000	/* CAPABILITY: WPA1+WPA2 avail*/
248#define	IEEE80211_C_BURST	0x02000000	/* CAPABILITY: frame bursting */
249#define	IEEE80211_C_WME		0x04000000	/* CAPABILITY: WME avail */
250/* XXX protection/barker? */
251
252#define	IEEE80211_C_CRYPTO	0x0000002f	/* CAPABILITY: crypto alg's */
253
254void	ieee80211_ifattach(struct ieee80211com *);
255void	ieee80211_ifdetach(struct ieee80211com *);
256void	ieee80211_announce(struct ieee80211com *);
257void	ieee80211_media_init(struct ieee80211com *,
258		ifm_change_cb_t, ifm_stat_cb_t);
259struct ieee80211com *ieee80211_find_vap(const u_int8_t mac[IEEE80211_ADDR_LEN]);
260int	ieee80211_media_change(struct ifnet *);
261void	ieee80211_media_status(struct ifnet *, struct ifmediareq *);
262int	ieee80211_ioctl(struct ieee80211com *, u_long, caddr_t);
263int	ieee80211_cfgget(struct ieee80211com *, u_long, caddr_t);
264int	ieee80211_cfgset(struct ieee80211com *, u_long, caddr_t);
265void	ieee80211_watchdog(struct ieee80211com *);
266int	ieee80211_rate2media(struct ieee80211com *, int,
267		enum ieee80211_phymode);
268int	ieee80211_media2rate(int);
269u_int	ieee80211_mhz2ieee(u_int, u_int);
270u_int	ieee80211_chan2ieee(struct ieee80211com *, struct ieee80211_channel *);
271u_int	ieee80211_ieee2mhz(u_int, u_int);
272int	ieee80211_setmode(struct ieee80211com *, enum ieee80211_phymode);
273enum ieee80211_phymode ieee80211_chan2mode(struct ieee80211com *,
274		struct ieee80211_channel *);
275
276/*
277 * Key update synchronization methods.  XXX should not be visible.
278 */
279static __inline void
280ieee80211_key_update_begin(struct ieee80211com *ic)
281{
282	ic->ic_crypto.cs_key_update_begin(ic);
283}
284static __inline void
285ieee80211_key_update_end(struct ieee80211com *ic)
286{
287	ic->ic_crypto.cs_key_update_end(ic);
288}
289
290/*
291 * XXX these need to be here for IEEE80211_F_DATAPAD
292 */
293
294/*
295 * Return the space occupied by the 802.11 header and any
296 * padding required by the driver.  This works for a
297 * management or data frame.
298 */
299static __inline int
300ieee80211_hdrspace(struct ieee80211com *ic, const void *data)
301{
302	int size = ieee80211_hdrsize(data);
303	if (ic->ic_flags & IEEE80211_F_DATAPAD)
304		size = roundup(size, sizeof(u_int32_t));
305	return size;
306}
307
308/*
309 * Like ieee80211_hdrspace, but handles any type of frame.
310 */
311static __inline int
312ieee80211_anyhdrspace(struct ieee80211com *ic, const void *data)
313{
314	int size = ieee80211_anyhdrsize(data);
315	if (ic->ic_flags & IEEE80211_F_DATAPAD)
316		size = roundup(size, sizeof(u_int32_t));
317	return size;
318}
319
320#define	IEEE80211_MSG_DEBUG	0x40000000	/* IFF_DEBUG equivalent */
321#define	IEEE80211_MSG_DUMPPKTS	0x20000000	/* IFF_LINK2 equivalant */
322#define	IEEE80211_MSG_CRYPTO	0x10000000	/* crypto work */
323#define	IEEE80211_MSG_INPUT	0x08000000	/* input handling */
324#define	IEEE80211_MSG_XRATE	0x04000000	/* rate set handling */
325#define	IEEE80211_MSG_ELEMID	0x02000000	/* element id parsing */
326#define	IEEE80211_MSG_NODE	0x01000000	/* node handling */
327#define	IEEE80211_MSG_ASSOC	0x00800000	/* association handling */
328#define	IEEE80211_MSG_AUTH	0x00400000	/* authentication handling */
329#define	IEEE80211_MSG_SCAN	0x00200000	/* scanning */
330#define	IEEE80211_MSG_OUTPUT	0x00100000	/* output handling */
331#define	IEEE80211_MSG_STATE	0x00080000	/* state machine */
332#define	IEEE80211_MSG_POWER	0x00040000	/* power save handling */
333#define	IEEE80211_MSG_DOT1X	0x00020000	/* 802.1x authenticator */
334#define	IEEE80211_MSG_DOT1XSM	0x00010000	/* 802.1x state machine */
335#define	IEEE80211_MSG_RADIUS	0x00008000	/* 802.1x radius client */
336#define	IEEE80211_MSG_RADDUMP	0x00004000	/* dump 802.1x radius packets */
337#define	IEEE80211_MSG_RADKEYS	0x00002000	/* dump 802.1x keys */
338#define	IEEE80211_MSG_WPA	0x00001000	/* WPA/RSN protocol */
339#define	IEEE80211_MSG_ACL	0x00000800	/* ACL handling */
340#define	IEEE80211_MSG_WME	0x00000400	/* WME protocol */
341
342#define	IEEE80211_MSG_ANY	0xffffffff	/* anything */
343
344#ifdef IEEE80211_DEBUG
345#define	IEEE80211_DPRINTF(_ic, _m, _fmt, ...) do {	\
346	if (_ic->ic_debug & (_m))			\
347		printf(_fmt, __VA_ARGS__);		\
348} while (0)
349#define	ieee80211_msg_debug(_ic) \
350	((_ic)->ic_debug & IEEE80211_MSG_DEBUG)
351#define	ieee80211_msg_dumppkts(_ic) \
352	((_ic)->ic_debug & IEEE80211_MSG_DUMPPKTS)
353#define	ieee80211_msg_input(_ic) \
354	((_ic)->ic_debug & IEEE80211_MSG_INPUT)
355#define	ieee80211_msg_radius(_ic) \
356	((_ic)->ic_debug & IEEE80211_MSG_RADIUS)
357#define	ieee80211_msg_dumpradius(_ic) \
358	((_ic)->ic_debug & IEEE80211_MSG_RADDUMP)
359#define	ieee80211_msg_dumpradkeys(_ic) \
360	((_ic)->ic_debug & IEEE80211_MSG_RADKEYS)
361#define	ieee80211_msg_scan(_ic) \
362	((_ic)->ic_debug & IEEE80211_MSG_SCAN)
363#else
364#define	IEEE80211_DPRINTF(_ic, _m, _fmt, ...)
365#endif
366
367#endif /* _NET80211_IEEE80211_VAR_H_ */
368