obio.c revision 178173
1/* $NetBSD: obio.c,v 1.11 2003/07/15 00:25:05 lukem Exp $ */ 2 3/*- 4 * Copyright (c) 2001, 2002, 2003 Wasabi Systems, Inc. 5 * All rights reserved. 6 * 7 * Written by Jason R. Thorpe for Wasabi Systems, Inc. 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 1. Redistributions of source code must retain the above copyright 13 * notice, this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in the 16 * documentation and/or other materials provided with the distribution. 17 * 3. All advertising materials mentioning features or use of this software 18 * must display the following acknowledgement: 19 * This product includes software developed for the NetBSD Project by 20 * Wasabi Systems, Inc. 21 * 4. The name of Wasabi Systems, Inc. may not be used to endorse 22 * or promote products derived from this software without specific prior 23 * written permission. 24 * 25 * THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND 26 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 27 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 28 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL WASABI SYSTEMS, INC 29 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 30 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 31 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 32 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 33 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 34 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 35 * POSSIBILITY OF SUCH DAMAGE. 36 */ 37 38/* 39 * On-board device autoconfiguration support for Intel IQ80321 40 * evaluation boards. 41 */ 42 43#include <sys/cdefs.h> 44__FBSDID("$FreeBSD: head/sys/mips/mips32/malta/obio.c 178173 2008-04-13 07:44:55Z imp $"); 45 46#include <sys/param.h> 47#include <sys/systm.h> 48#include <sys/bus.h> 49#include <sys/kernel.h> 50#include <sys/module.h> 51#include <sys/rman.h> 52#include <sys/malloc.h> 53 54#include <machine/bus.h> 55 56#include <mips/mips32/malta/maltareg.h> 57#include <mips/mips32/malta/obiovar.h> 58 59int obio_probe(device_t); 60int obio_attach(device_t); 61 62/* 63 * A bit tricky and hackish. Since we need OBIO to rely 64 * on PCI we make it pseudo-pci device. But there should 65 * be only one such device, so we use this static flag 66 * to prevent false positives on every realPCI device probe. 67 */ 68static int have_one = 0; 69 70int 71obio_probe(device_t dev) 72{ 73 if(!have_one) 74 { 75 have_one = 1; 76 return 0; 77 } 78 else 79 return (ENXIO); 80} 81 82int 83obio_attach(device_t dev) 84{ 85 struct obio_softc *sc = device_get_softc(dev); 86 87 sc->oba_st = MIPS_BUS_SPACE_IO; 88 sc->oba_addr = MIPS_PHYS_TO_KSEG1(MALTA_UART0ADR); 89 sc->oba_size = MALTA_PCIMEM3_SIZE; 90 sc->oba_rman.rm_type = RMAN_ARRAY; 91 sc->oba_rman.rm_descr = "OBIO I/O"; 92 if (rman_init(&sc->oba_rman) != 0 || 93 rman_manage_region(&sc->oba_rman, 94 sc->oba_addr, sc->oba_addr + sc->oba_size) != 0) 95 panic("obio_attach: failed to set up I/O rman"); 96 sc->oba_irq_rman.rm_type = RMAN_ARRAY; 97 sc->oba_irq_rman.rm_descr = "OBIO IRQ"; 98 99 /* 100 * This module is intended for UART purposes only and 101 * it's IRQ is 4 102 */ 103 if (rman_init(&sc->oba_irq_rman) != 0 || 104 rman_manage_region(&sc->oba_irq_rman, 4, 4) != 0) 105 panic("obio_attach: failed to set up IRQ rman"); 106 107 device_add_child(dev, "uart", 0); 108 bus_generic_probe(dev); 109 bus_generic_attach(dev); 110 111 return (0); 112} 113 114static struct resource * 115obio_alloc_resource(device_t bus, device_t child, int type, int *rid, 116 u_long start, u_long end, u_long count, u_int flags) 117{ 118 struct resource *rv; 119 struct rman *rm; 120 bus_space_tag_t bt = 0; 121 bus_space_handle_t bh = 0; 122 struct obio_softc *sc = device_get_softc(bus); 123 124 switch (type) { 125 case SYS_RES_IRQ: 126 rm = &sc->oba_irq_rman; 127 break; 128 case SYS_RES_MEMORY: 129 return (NULL); 130 case SYS_RES_IOPORT: 131 rm = &sc->oba_rman; 132 bt = sc->oba_st; 133 bh = sc->oba_addr; 134 start = bh; 135 break; 136 default: 137 return (NULL); 138 } 139 140 141 rv = rman_reserve_resource(rm, start, end, count, flags, child); 142 if (rv == NULL) 143 return (NULL); 144 if (type == SYS_RES_IRQ) 145 return (rv); 146 rman_set_rid(rv, *rid); 147 rman_set_bustag(rv, bt); 148 rman_set_bushandle(rv, bh); 149 150 if (0) { 151 if (bus_activate_resource(child, type, *rid, rv)) { 152 rman_release_resource(rv); 153 return (NULL); 154 } 155 } 156 return (rv); 157 158} 159 160static int 161obio_activate_resource(device_t bus, device_t child, int type, int rid, 162 struct resource *r) 163{ 164 return (0); 165} 166static device_method_t obio_methods[] = { 167 DEVMETHOD(device_probe, obio_probe), 168 DEVMETHOD(device_attach, obio_attach), 169 170 DEVMETHOD(bus_alloc_resource, obio_alloc_resource), 171 DEVMETHOD(bus_activate_resource, obio_activate_resource), 172 DEVMETHOD(bus_setup_intr, bus_generic_setup_intr), 173 DEVMETHOD(bus_teardown_intr, bus_generic_teardown_intr), 174 175 {0, 0}, 176}; 177 178static driver_t obio_driver = { 179 "obio", 180 obio_methods, 181 sizeof(struct obio_softc), 182}; 183static devclass_t obio_devclass; 184 185DRIVER_MODULE(obio, pci, obio_driver, obio_devclass, 0, 0); 186