if_kue.c revision 192499
1/*- 2 * Copyright (c) 1997, 1998, 1999, 2000 3 * Bill Paul <wpaul@ee.columbia.edu>. All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 3. All advertising materials mentioning features or use of this software 14 * must display the following acknowledgement: 15 * This product includes software developed by Bill Paul. 16 * 4. Neither the name of the author nor the names of any co-contributors 17 * may be used to endorse or promote products derived from this software 18 * without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 30 * THE POSSIBILITY OF SUCH DAMAGE. 31 */ 32 33#include <sys/cdefs.h> 34__FBSDID("$FreeBSD: head/sys/dev/usb/net/if_kue.c 192499 2009-05-21 00:04:17Z thompsa $"); 35 36/* 37 * Kawasaki LSI KL5KUSB101B USB to ethernet adapter driver. 38 * 39 * Written by Bill Paul <wpaul@ee.columbia.edu> 40 * Electrical Engineering Department 41 * Columbia University, New York City 42 */ 43 44/* 45 * The KLSI USB to ethernet adapter chip contains an USB serial interface, 46 * ethernet MAC and embedded microcontroller (called the QT Engine). 47 * The chip must have firmware loaded into it before it will operate. 48 * Packets are passed between the chip and host via bulk transfers. 49 * There is an interrupt endpoint mentioned in the software spec, however 50 * it's currently unused. This device is 10Mbps half-duplex only, hence 51 * there is no media selection logic. The MAC supports a 128 entry 52 * multicast filter, though the exact size of the filter can depend 53 * on the firmware. Curiously, while the software spec describes various 54 * ethernet statistics counters, my sample adapter and firmware combination 55 * claims not to support any statistics counters at all. 56 * 57 * Note that once we load the firmware in the device, we have to be 58 * careful not to load it again: if you restart your computer but 59 * leave the adapter attached to the USB controller, it may remain 60 * powered on and retain its firmware. In this case, we don't need 61 * to load the firmware a second time. 62 * 63 * Special thanks to Rob Furr for providing an ADS Technologies 64 * adapter for development and testing. No monkeys were harmed during 65 * the development of this driver. 66 */ 67 68#include "usbdevs.h" 69#include <dev/usb/usb.h> 70#include <dev/usb/usb_mfunc.h> 71#include <dev/usb/usb_error.h> 72 73#define USB_DEBUG_VAR kue_debug 74 75#include <dev/usb/usb_core.h> 76#include <dev/usb/usb_lookup.h> 77#include <dev/usb/usb_process.h> 78#include <dev/usb/usb_debug.h> 79#include <dev/usb/usb_request.h> 80#include <dev/usb/usb_busdma.h> 81#include <dev/usb/usb_util.h> 82 83#include <dev/usb/net/usb_ethernet.h> 84#include <dev/usb/net/if_kuereg.h> 85#include <dev/usb/net/if_kuefw.h> 86 87/* 88 * Various supported device vendors/products. 89 */ 90static const struct usb2_device_id kue_devs[] = { 91 {USB_VPI(USB_VENDOR_3COM, USB_PRODUCT_3COM_3C19250, 0)}, 92 {USB_VPI(USB_VENDOR_3COM, USB_PRODUCT_3COM_3C460, 0)}, 93 {USB_VPI(USB_VENDOR_ABOCOM, USB_PRODUCT_ABOCOM_URE450, 0)}, 94 {USB_VPI(USB_VENDOR_ADS, USB_PRODUCT_ADS_UBS10BT, 0)}, 95 {USB_VPI(USB_VENDOR_ADS, USB_PRODUCT_ADS_UBS10BTX, 0)}, 96 {USB_VPI(USB_VENDOR_AOX, USB_PRODUCT_AOX_USB101, 0)}, 97 {USB_VPI(USB_VENDOR_ASANTE, USB_PRODUCT_ASANTE_EA, 0)}, 98 {USB_VPI(USB_VENDOR_ATEN, USB_PRODUCT_ATEN_DSB650C, 0)}, 99 {USB_VPI(USB_VENDOR_ATEN, USB_PRODUCT_ATEN_UC10T, 0)}, 100 {USB_VPI(USB_VENDOR_COREGA, USB_PRODUCT_COREGA_ETHER_USB_T, 0)}, 101 {USB_VPI(USB_VENDOR_DLINK, USB_PRODUCT_DLINK_DSB650C, 0)}, 102 {USB_VPI(USB_VENDOR_ENTREGA, USB_PRODUCT_ENTREGA_E45, 0)}, 103 {USB_VPI(USB_VENDOR_ENTREGA, USB_PRODUCT_ENTREGA_XX1, 0)}, 104 {USB_VPI(USB_VENDOR_ENTREGA, USB_PRODUCT_ENTREGA_XX2, 0)}, 105 {USB_VPI(USB_VENDOR_IODATA, USB_PRODUCT_IODATA_USBETT, 0)}, 106 {USB_VPI(USB_VENDOR_JATON, USB_PRODUCT_JATON_EDA, 0)}, 107 {USB_VPI(USB_VENDOR_KINGSTON, USB_PRODUCT_KINGSTON_XX1, 0)}, 108 {USB_VPI(USB_VENDOR_KLSI, USB_PRODUCT_AOX_USB101, 0)}, 109 {USB_VPI(USB_VENDOR_KLSI, USB_PRODUCT_KLSI_DUH3E10BT, 0)}, 110 {USB_VPI(USB_VENDOR_KLSI, USB_PRODUCT_KLSI_DUH3E10BTN, 0)}, 111 {USB_VPI(USB_VENDOR_LINKSYS, USB_PRODUCT_LINKSYS_USB10T, 0)}, 112 {USB_VPI(USB_VENDOR_MOBILITY, USB_PRODUCT_MOBILITY_EA, 0)}, 113 {USB_VPI(USB_VENDOR_NETGEAR, USB_PRODUCT_NETGEAR_EA101, 0)}, 114 {USB_VPI(USB_VENDOR_NETGEAR, USB_PRODUCT_NETGEAR_EA101X, 0)}, 115 {USB_VPI(USB_VENDOR_PERACOM, USB_PRODUCT_PERACOM_ENET, 0)}, 116 {USB_VPI(USB_VENDOR_PERACOM, USB_PRODUCT_PERACOM_ENET2, 0)}, 117 {USB_VPI(USB_VENDOR_PERACOM, USB_PRODUCT_PERACOM_ENET3, 0)}, 118 {USB_VPI(USB_VENDOR_PORTGEAR, USB_PRODUCT_PORTGEAR_EA8, 0)}, 119 {USB_VPI(USB_VENDOR_PORTGEAR, USB_PRODUCT_PORTGEAR_EA9, 0)}, 120 {USB_VPI(USB_VENDOR_PORTSMITH, USB_PRODUCT_PORTSMITH_EEA, 0)}, 121 {USB_VPI(USB_VENDOR_SHARK, USB_PRODUCT_SHARK_PA, 0)}, 122 {USB_VPI(USB_VENDOR_SILICOM, USB_PRODUCT_SILICOM_GPE, 0)}, 123 {USB_VPI(USB_VENDOR_SILICOM, USB_PRODUCT_SILICOM_U2E, 0)}, 124 {USB_VPI(USB_VENDOR_SMC, USB_PRODUCT_SMC_2102USB, 0)}, 125}; 126 127/* prototypes */ 128 129static device_probe_t kue_probe; 130static device_attach_t kue_attach; 131static device_detach_t kue_detach; 132 133static usb2_callback_t kue_bulk_read_callback; 134static usb2_callback_t kue_bulk_write_callback; 135 136static usb2_ether_fn_t kue_attach_post; 137static usb2_ether_fn_t kue_init; 138static usb2_ether_fn_t kue_stop; 139static usb2_ether_fn_t kue_start; 140static usb2_ether_fn_t kue_setmulti; 141static usb2_ether_fn_t kue_setpromisc; 142 143static int kue_do_request(struct kue_softc *, 144 struct usb2_device_request *, void *); 145static int kue_setword(struct kue_softc *, uint8_t, uint16_t); 146static int kue_ctl(struct kue_softc *, uint8_t, uint8_t, uint16_t, 147 void *, int); 148static int kue_load_fw(struct kue_softc *); 149static void kue_reset(struct kue_softc *); 150 151#if USB_DEBUG 152static int kue_debug = 0; 153 154SYSCTL_NODE(_hw_usb2, OID_AUTO, kue, CTLFLAG_RW, 0, "USB kue"); 155SYSCTL_INT(_hw_usb2_kue, OID_AUTO, debug, CTLFLAG_RW, &kue_debug, 0, 156 "Debug level"); 157#endif 158 159static const struct usb2_config kue_config[KUE_N_TRANSFER] = { 160 161 [KUE_BULK_DT_WR] = { 162 .type = UE_BULK, 163 .endpoint = UE_ADDR_ANY, 164 .direction = UE_DIR_OUT, 165 .bufsize = (MCLBYTES + 2 + 64), 166 .flags = {.pipe_bof = 1,}, 167 .callback = kue_bulk_write_callback, 168 .timeout = 10000, /* 10 seconds */ 169 }, 170 171 [KUE_BULK_DT_RD] = { 172 .type = UE_BULK, 173 .endpoint = UE_ADDR_ANY, 174 .direction = UE_DIR_IN, 175 .bufsize = (MCLBYTES + 2), 176 .flags = {.pipe_bof = 1,.short_xfer_ok = 1,}, 177 .callback = kue_bulk_read_callback, 178 .timeout = 0, /* no timeout */ 179 }, 180}; 181 182static device_method_t kue_methods[] = { 183 /* Device interface */ 184 DEVMETHOD(device_probe, kue_probe), 185 DEVMETHOD(device_attach, kue_attach), 186 DEVMETHOD(device_detach, kue_detach), 187 188 {0, 0} 189}; 190 191static driver_t kue_driver = { 192 .name = "kue", 193 .methods = kue_methods, 194 .size = sizeof(struct kue_softc), 195}; 196 197static devclass_t kue_devclass; 198 199DRIVER_MODULE(kue, uhub, kue_driver, kue_devclass, NULL, 0); 200MODULE_DEPEND(kue, uether, 1, 1, 1); 201MODULE_DEPEND(kue, usb, 1, 1, 1); 202MODULE_DEPEND(kue, ether, 1, 1, 1); 203 204static const struct usb2_ether_methods kue_ue_methods = { 205 .ue_attach_post = kue_attach_post, 206 .ue_start = kue_start, 207 .ue_init = kue_init, 208 .ue_stop = kue_stop, 209 .ue_setmulti = kue_setmulti, 210 .ue_setpromisc = kue_setpromisc, 211}; 212 213/* 214 * We have a custom do_request function which is almost like the 215 * regular do_request function, except it has a much longer timeout. 216 * Why? Because we need to make requests over the control endpoint 217 * to download the firmware to the device, which can take longer 218 * than the default timeout. 219 */ 220static int 221kue_do_request(struct kue_softc *sc, struct usb2_device_request *req, 222 void *data) 223{ 224 usb2_error_t err; 225 226 err = usb2_ether_do_request(&sc->sc_ue, req, data, 60000); 227 228 return (err); 229} 230 231static int 232kue_setword(struct kue_softc *sc, uint8_t breq, uint16_t word) 233{ 234 struct usb2_device_request req; 235 236 req.bmRequestType = UT_WRITE_VENDOR_DEVICE; 237 req.bRequest = breq; 238 USETW(req.wValue, word); 239 USETW(req.wIndex, 0); 240 USETW(req.wLength, 0); 241 242 return (kue_do_request(sc, &req, NULL)); 243} 244 245static int 246kue_ctl(struct kue_softc *sc, uint8_t rw, uint8_t breq, 247 uint16_t val, void *data, int len) 248{ 249 struct usb2_device_request req; 250 251 if (rw == KUE_CTL_WRITE) 252 req.bmRequestType = UT_WRITE_VENDOR_DEVICE; 253 else 254 req.bmRequestType = UT_READ_VENDOR_DEVICE; 255 256 257 req.bRequest = breq; 258 USETW(req.wValue, val); 259 USETW(req.wIndex, 0); 260 USETW(req.wLength, len); 261 262 return (kue_do_request(sc, &req, data)); 263} 264 265static int 266kue_load_fw(struct kue_softc *sc) 267{ 268 struct usb2_device_descriptor *dd; 269 uint16_t hwrev; 270 usb2_error_t err; 271 272 dd = usb2_get_device_descriptor(sc->sc_ue.ue_udev); 273 hwrev = UGETW(dd->bcdDevice); 274 275 /* 276 * First, check if we even need to load the firmware. 277 * If the device was still attached when the system was 278 * rebooted, it may already have firmware loaded in it. 279 * If this is the case, we don't need to do it again. 280 * And in fact, if we try to load it again, we'll hang, 281 * so we have to avoid this condition if we don't want 282 * to look stupid. 283 * 284 * We can test this quickly by checking the bcdRevision 285 * code. The NIC will return a different revision code if 286 * it's probed while the firmware is still loaded and 287 * running. 288 */ 289 if (hwrev == 0x0202) 290 return(0); 291 292 /* Load code segment */ 293 err = kue_ctl(sc, KUE_CTL_WRITE, KUE_CMD_SEND_SCAN, 294 0, kue_code_seg, sizeof(kue_code_seg)); 295 if (err) { 296 device_printf(sc->sc_ue.ue_dev, "failed to load code segment: %s\n", 297 usb2_errstr(err)); 298 return(ENXIO); 299 } 300 301 /* Load fixup segment */ 302 err = kue_ctl(sc, KUE_CTL_WRITE, KUE_CMD_SEND_SCAN, 303 0, kue_fix_seg, sizeof(kue_fix_seg)); 304 if (err) { 305 device_printf(sc->sc_ue.ue_dev, "failed to load fixup segment: %s\n", 306 usb2_errstr(err)); 307 return(ENXIO); 308 } 309 310 /* Send trigger command. */ 311 err = kue_ctl(sc, KUE_CTL_WRITE, KUE_CMD_SEND_SCAN, 312 0, kue_trig_seg, sizeof(kue_trig_seg)); 313 if (err) { 314 device_printf(sc->sc_ue.ue_dev, "failed to load trigger segment: %s\n", 315 usb2_errstr(err)); 316 return(ENXIO); 317 } 318 319 return (0); 320} 321 322static void 323kue_setpromisc(struct usb2_ether *ue) 324{ 325 struct kue_softc *sc = usb2_ether_getsc(ue); 326 struct ifnet *ifp = usb2_ether_getifp(ue); 327 328 KUE_LOCK_ASSERT(sc, MA_OWNED); 329 330 if (ifp->if_flags & IFF_PROMISC) 331 sc->sc_rxfilt |= KUE_RXFILT_PROMISC; 332 else 333 sc->sc_rxfilt &= ~KUE_RXFILT_PROMISC; 334 335 kue_setword(sc, KUE_CMD_SET_PKT_FILTER, sc->sc_rxfilt); 336} 337 338static void 339kue_setmulti(struct usb2_ether *ue) 340{ 341 struct kue_softc *sc = usb2_ether_getsc(ue); 342 struct ifnet *ifp = usb2_ether_getifp(ue); 343 struct ifmultiaddr *ifma; 344 int i = 0; 345 346 KUE_LOCK_ASSERT(sc, MA_OWNED); 347 348 if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) { 349 sc->sc_rxfilt |= KUE_RXFILT_ALLMULTI; 350 sc->sc_rxfilt &= ~KUE_RXFILT_MULTICAST; 351 kue_setword(sc, KUE_CMD_SET_PKT_FILTER, sc->sc_rxfilt); 352 return; 353 } 354 355 sc->sc_rxfilt &= ~KUE_RXFILT_ALLMULTI; 356 357 IF_ADDR_LOCK(ifp); 358 TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) 359 { 360 if (ifma->ifma_addr->sa_family != AF_LINK) 361 continue; 362 /* 363 * If there are too many addresses for the 364 * internal filter, switch over to allmulti mode. 365 */ 366 if (i == KUE_MCFILTCNT(sc)) 367 break; 368 bcopy(LLADDR((struct sockaddr_dl *)ifma->ifma_addr), 369 KUE_MCFILT(sc, i), ETHER_ADDR_LEN); 370 i++; 371 } 372 IF_ADDR_UNLOCK(ifp); 373 374 if (i == KUE_MCFILTCNT(sc)) 375 sc->sc_rxfilt |= KUE_RXFILT_ALLMULTI; 376 else { 377 sc->sc_rxfilt |= KUE_RXFILT_MULTICAST; 378 kue_ctl(sc, KUE_CTL_WRITE, KUE_CMD_SET_MCAST_FILTERS, 379 i, sc->sc_mcfilters, i * ETHER_ADDR_LEN); 380 } 381 382 kue_setword(sc, KUE_CMD_SET_PKT_FILTER, sc->sc_rxfilt); 383} 384 385/* 386 * Issue a SET_CONFIGURATION command to reset the MAC. This should be 387 * done after the firmware is loaded into the adapter in order to 388 * bring it into proper operation. 389 */ 390static void 391kue_reset(struct kue_softc *sc) 392{ 393 struct usb2_config_descriptor *cd; 394 usb2_error_t err; 395 396 cd = usb2_get_config_descriptor(sc->sc_ue.ue_udev); 397 398 err = usb2_req_set_config(sc->sc_ue.ue_udev, &sc->sc_mtx, 399 cd->bConfigurationValue); 400 if (err) 401 DPRINTF("reset failed (ignored)\n"); 402 403 /* wait a little while for the chip to get its brains in order */ 404 usb2_ether_pause(&sc->sc_ue, hz / 100); 405} 406 407static void 408kue_attach_post(struct usb2_ether *ue) 409{ 410 struct kue_softc *sc = usb2_ether_getsc(ue); 411 int error; 412 413 /* load the firmware into the NIC */ 414 error = kue_load_fw(sc); 415 if (error) { 416 device_printf(sc->sc_ue.ue_dev, "could not load firmware\n"); 417 /* ignore the error */ 418 } 419 420 /* reset the adapter */ 421 kue_reset(sc); 422 423 /* read ethernet descriptor */ 424 kue_ctl(sc, KUE_CTL_READ, KUE_CMD_GET_ETHER_DESCRIPTOR, 425 0, &sc->sc_desc, sizeof(sc->sc_desc)); 426 427 /* copy in ethernet address */ 428 memcpy(ue->ue_eaddr, sc->sc_desc.kue_macaddr, sizeof(ue->ue_eaddr)); 429} 430 431/* 432 * Probe for a KLSI chip. 433 */ 434static int 435kue_probe(device_t dev) 436{ 437 struct usb2_attach_arg *uaa = device_get_ivars(dev); 438 439 if (uaa->usb_mode != USB_MODE_HOST) 440 return (ENXIO); 441 if (uaa->info.bConfigIndex != KUE_CONFIG_IDX) 442 return (ENXIO); 443 if (uaa->info.bIfaceIndex != KUE_IFACE_IDX) 444 return (ENXIO); 445 446 return (usb2_lookup_id_by_uaa(kue_devs, sizeof(kue_devs), uaa)); 447} 448 449/* 450 * Attach the interface. Allocate softc structures, do 451 * setup and ethernet/BPF attach. 452 */ 453static int 454kue_attach(device_t dev) 455{ 456 struct usb2_attach_arg *uaa = device_get_ivars(dev); 457 struct kue_softc *sc = device_get_softc(dev); 458 struct usb2_ether *ue = &sc->sc_ue; 459 uint8_t iface_index; 460 int error; 461 462 device_set_usb2_desc(dev); 463 mtx_init(&sc->sc_mtx, device_get_nameunit(dev), NULL, MTX_DEF); 464 465 iface_index = KUE_IFACE_IDX; 466 error = usb2_transfer_setup(uaa->device, &iface_index, 467 sc->sc_xfer, kue_config, KUE_N_TRANSFER, sc, &sc->sc_mtx); 468 if (error) { 469 device_printf(dev, "allocating USB transfers failed!\n"); 470 goto detach; 471 } 472 473 sc->sc_mcfilters = malloc(KUE_MCFILTCNT(sc) * ETHER_ADDR_LEN, 474 M_USBDEV, M_WAITOK); 475 if (sc->sc_mcfilters == NULL) { 476 device_printf(dev, "failed allocating USB memory!\n"); 477 goto detach; 478 } 479 480 ue->ue_sc = sc; 481 ue->ue_dev = dev; 482 ue->ue_udev = uaa->device; 483 ue->ue_mtx = &sc->sc_mtx; 484 ue->ue_methods = &kue_ue_methods; 485 486 error = usb2_ether_ifattach(ue); 487 if (error) { 488 device_printf(dev, "could not attach interface\n"); 489 goto detach; 490 } 491 return (0); /* success */ 492 493detach: 494 kue_detach(dev); 495 return (ENXIO); /* failure */ 496} 497 498static int 499kue_detach(device_t dev) 500{ 501 struct kue_softc *sc = device_get_softc(dev); 502 struct usb2_ether *ue = &sc->sc_ue; 503 504 usb2_transfer_unsetup(sc->sc_xfer, KUE_N_TRANSFER); 505 usb2_ether_ifdetach(ue); 506 mtx_destroy(&sc->sc_mtx); 507 free(sc->sc_mcfilters, M_USBDEV); 508 509 return (0); 510} 511 512/* 513 * A frame has been uploaded: pass the resulting mbuf chain up to 514 * the higher level protocols. 515 */ 516static void 517kue_bulk_read_callback(struct usb2_xfer *xfer) 518{ 519 struct kue_softc *sc = xfer->priv_sc; 520 struct usb2_ether *ue = &sc->sc_ue; 521 struct ifnet *ifp = usb2_ether_getifp(ue); 522 uint8_t buf[2]; 523 int len; 524 525 switch (USB_GET_STATE(xfer)) { 526 case USB_ST_TRANSFERRED: 527 528 if (xfer->actlen <= (2 + sizeof(struct ether_header))) { 529 ifp->if_ierrors++; 530 goto tr_setup; 531 } 532 usb2_copy_out(xfer->frbuffers, 0, buf, 2); 533 xfer->actlen -= 2; 534 len = buf[0] | (buf[1] << 8); 535 len = min(xfer->actlen, len); 536 537 usb2_ether_rxbuf(ue, xfer->frbuffers, 2, len); 538 /* FALLTHROUGH */ 539 case USB_ST_SETUP: 540tr_setup: 541 xfer->frlengths[0] = xfer->max_data_length; 542 usb2_start_hardware(xfer); 543 usb2_ether_rxflush(ue); 544 return; 545 546 default: /* Error */ 547 DPRINTF("bulk read error, %s\n", 548 usb2_errstr(xfer->error)); 549 550 if (xfer->error != USB_ERR_CANCELLED) { 551 /* try to clear stall first */ 552 xfer->flags.stall_pipe = 1; 553 goto tr_setup; 554 } 555 return; 556 557 } 558} 559 560static void 561kue_bulk_write_callback(struct usb2_xfer *xfer) 562{ 563 struct kue_softc *sc = xfer->priv_sc; 564 struct ifnet *ifp = usb2_ether_getifp(&sc->sc_ue); 565 struct mbuf *m; 566 int total_len; 567 int temp_len; 568 uint8_t buf[2]; 569 570 switch (USB_GET_STATE(xfer)) { 571 case USB_ST_TRANSFERRED: 572 DPRINTFN(11, "transfer complete\n"); 573 ifp->if_opackets++; 574 575 /* FALLTHROUGH */ 576 case USB_ST_SETUP: 577tr_setup: 578 IFQ_DRV_DEQUEUE(&ifp->if_snd, m); 579 580 if (m == NULL) 581 return; 582 if (m->m_pkthdr.len > MCLBYTES) 583 m->m_pkthdr.len = MCLBYTES; 584 temp_len = (m->m_pkthdr.len + 2); 585 total_len = (temp_len + (64 - (temp_len % 64))); 586 587 /* the first two bytes are the frame length */ 588 589 buf[0] = (uint8_t)(m->m_pkthdr.len); 590 buf[1] = (uint8_t)(m->m_pkthdr.len >> 8); 591 592 usb2_copy_in(xfer->frbuffers, 0, buf, 2); 593 594 usb2_m_copy_in(xfer->frbuffers, 2, 595 m, 0, m->m_pkthdr.len); 596 597 usb2_bzero(xfer->frbuffers, temp_len, 598 total_len - temp_len); 599 600 xfer->frlengths[0] = total_len; 601 602 /* 603 * if there's a BPF listener, bounce a copy 604 * of this frame to him: 605 */ 606 BPF_MTAP(ifp, m); 607 608 m_freem(m); 609 610 usb2_start_hardware(xfer); 611 612 return; 613 614 default: /* Error */ 615 DPRINTFN(11, "transfer error, %s\n", 616 usb2_errstr(xfer->error)); 617 618 ifp->if_oerrors++; 619 620 if (xfer->error != USB_ERR_CANCELLED) { 621 /* try to clear stall first */ 622 xfer->flags.stall_pipe = 1; 623 goto tr_setup; 624 } 625 return; 626 627 } 628} 629 630static void 631kue_start(struct usb2_ether *ue) 632{ 633 struct kue_softc *sc = usb2_ether_getsc(ue); 634 635 /* 636 * start the USB transfers, if not already started: 637 */ 638 usb2_transfer_start(sc->sc_xfer[KUE_BULK_DT_RD]); 639 usb2_transfer_start(sc->sc_xfer[KUE_BULK_DT_WR]); 640} 641 642static void 643kue_init(struct usb2_ether *ue) 644{ 645 struct kue_softc *sc = usb2_ether_getsc(ue); 646 struct ifnet *ifp = usb2_ether_getifp(ue); 647 648 KUE_LOCK_ASSERT(sc, MA_OWNED); 649 650 /* set MAC address */ 651 kue_ctl(sc, KUE_CTL_WRITE, KUE_CMD_SET_MAC, 652 0, IF_LLADDR(ifp), ETHER_ADDR_LEN); 653 654 /* I'm not sure how to tune these. */ 655#if 0 656 /* 657 * Leave this one alone for now; setting it 658 * wrong causes lockups on some machines/controllers. 659 */ 660 kue_setword(sc, KUE_CMD_SET_SOFS, 1); 661#endif 662 kue_setword(sc, KUE_CMD_SET_URB_SIZE, 64); 663 664 /* load the multicast filter */ 665 kue_setpromisc(ue); 666 667 usb2_transfer_set_stall(sc->sc_xfer[KUE_BULK_DT_WR]); 668 669 ifp->if_drv_flags |= IFF_DRV_RUNNING; 670 kue_start(ue); 671} 672 673static void 674kue_stop(struct usb2_ether *ue) 675{ 676 struct kue_softc *sc = usb2_ether_getsc(ue); 677 struct ifnet *ifp = usb2_ether_getifp(ue); 678 679 KUE_LOCK_ASSERT(sc, MA_OWNED); 680 681 ifp->if_drv_flags &= ~IFF_DRV_RUNNING; 682 683 /* 684 * stop all the transfers, if not already stopped: 685 */ 686 usb2_transfer_stop(sc->sc_xfer[KUE_BULK_DT_WR]); 687 usb2_transfer_stop(sc->sc_xfer[KUE_BULK_DT_RD]); 688} 689