ar9280_attach.c revision 203930
1/* 2 * Copyright (c) 2008-2009 Sam Leffler, Errno Consulting 3 * Copyright (c) 2008 Atheros Communications, Inc. 4 * 5 * Permission to use, copy, modify, and/or distribute this software for any 6 * purpose with or without fee is hereby granted, provided that the above 7 * copyright notice and this permission notice appear in all copies. 8 * 9 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 10 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 11 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 12 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 13 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 14 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 15 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 16 * 17 * $FreeBSD: head/sys/dev/ath/ath_hal/ar5416/ar9280_attach.c 203930 2010-02-15 17:49:49Z rpaulo $ 18 */ 19#include "opt_ah.h" 20 21#include "ah.h" 22#include "ah_internal.h" 23#include "ah_devid.h" 24 25#include "ah_eeprom_v14.h" /* XXX for tx/rx gain */ 26 27#include "ar5416/ar9280.h" 28#include "ar5416/ar5416reg.h" 29#include "ar5416/ar5416phy.h" 30 31#include "ar5416/ar9280v1.ini" 32#include "ar5416/ar9280v2.ini" 33 34static const HAL_PERCAL_DATA ar9280_iq_cal = { /* single sample */ 35 .calName = "IQ", .calType = IQ_MISMATCH_CAL, 36 .calNumSamples = MIN_CAL_SAMPLES, 37 .calCountMax = PER_MAX_LOG_COUNT, 38 .calCollect = ar5416IQCalCollect, 39 .calPostProc = ar5416IQCalibration 40}; 41static const HAL_PERCAL_DATA ar9280_adc_gain_cal = { /* single sample */ 42 .calName = "ADC Gain", .calType = ADC_GAIN_CAL, 43 .calNumSamples = MIN_CAL_SAMPLES, 44 .calCountMax = PER_MIN_LOG_COUNT, 45 .calCollect = ar5416AdcGainCalCollect, 46 .calPostProc = ar5416AdcGainCalibration 47}; 48static const HAL_PERCAL_DATA ar9280_adc_dc_cal = { /* single sample */ 49 .calName = "ADC DC", .calType = ADC_DC_CAL, 50 .calNumSamples = MIN_CAL_SAMPLES, 51 .calCountMax = PER_MIN_LOG_COUNT, 52 .calCollect = ar5416AdcDcCalCollect, 53 .calPostProc = ar5416AdcDcCalibration 54}; 55static const HAL_PERCAL_DATA ar9280_adc_init_dc_cal = { 56 .calName = "ADC Init DC", .calType = ADC_DC_INIT_CAL, 57 .calNumSamples = MIN_CAL_SAMPLES, 58 .calCountMax = INIT_LOG_COUNT, 59 .calCollect = ar5416AdcDcCalCollect, 60 .calPostProc = ar5416AdcDcCalibration 61}; 62 63static void ar9280ConfigPCIE(struct ath_hal *ah, HAL_BOOL restore); 64static HAL_BOOL ar9280FillCapabilityInfo(struct ath_hal *ah); 65static void ar9280WriteIni(struct ath_hal *ah, 66 const struct ieee80211_channel *chan); 67 68static void 69ar9280AniSetup(struct ath_hal *ah) 70{ 71 /* NB: disable ANI for reliable RIFS rx */ 72 ar5212AniAttach(ah, AH_NULL, AH_NULL, AH_FALSE); 73} 74 75/* 76 * Attach for an AR9280 part. 77 */ 78static struct ath_hal * 79ar9280Attach(uint16_t devid, HAL_SOFTC sc, 80 HAL_BUS_TAG st, HAL_BUS_HANDLE sh, HAL_STATUS *status) 81{ 82 struct ath_hal_9280 *ahp9280; 83 struct ath_hal_5212 *ahp; 84 struct ath_hal *ah; 85 uint32_t val; 86 HAL_STATUS ecode; 87 HAL_BOOL rfStatus; 88 89 HALDEBUG(AH_NULL, HAL_DEBUG_ATTACH, "%s: sc %p st %p sh %p\n", 90 __func__, sc, (void*) st, (void*) sh); 91 92 /* NB: memory is returned zero'd */ 93 ahp9280 = ath_hal_malloc(sizeof (struct ath_hal_9280)); 94 if (ahp9280 == AH_NULL) { 95 HALDEBUG(AH_NULL, HAL_DEBUG_ANY, 96 "%s: cannot allocate memory for state block\n", __func__); 97 *status = HAL_ENOMEM; 98 return AH_NULL; 99 } 100 ahp = AH5212(ahp9280); 101 ah = &ahp->ah_priv.h; 102 103 ar5416InitState(AH5416(ah), devid, sc, st, sh, status); 104 105 /* XXX override with 9280 specific state */ 106 /* override 5416 methods for our needs */ 107 ah->ah_setAntennaSwitch = ar9280SetAntennaSwitch; 108 ah->ah_configPCIE = ar9280ConfigPCIE; 109 110 AH5416(ah)->ah_cal.iqCalData.calData = &ar9280_iq_cal; 111 AH5416(ah)->ah_cal.adcGainCalData.calData = &ar9280_adc_gain_cal; 112 AH5416(ah)->ah_cal.adcDcCalData.calData = &ar9280_adc_dc_cal; 113 AH5416(ah)->ah_cal.adcDcCalInitData.calData = &ar9280_adc_init_dc_cal; 114 AH5416(ah)->ah_cal.suppCals = ADC_GAIN_CAL | ADC_DC_CAL | IQ_MISMATCH_CAL; 115 116 AH5416(ah)->ah_spurMitigate = ar9280SpurMitigate; 117 AH5416(ah)->ah_writeIni = ar9280WriteIni; 118 AH5416(ah)->ah_rx_chainmask = AR9280_DEFAULT_RXCHAINMASK; 119 AH5416(ah)->ah_tx_chainmask = AR9280_DEFAULT_TXCHAINMASK; 120 121 if (!ar5416SetResetReg(ah, HAL_RESET_POWER_ON)) { 122 /* reset chip */ 123 HALDEBUG(ah, HAL_DEBUG_ANY, "%s: couldn't reset chip\n", 124 __func__); 125 ecode = HAL_EIO; 126 goto bad; 127 } 128 129 if (!ar5416SetPowerMode(ah, HAL_PM_AWAKE, AH_TRUE)) { 130 HALDEBUG(ah, HAL_DEBUG_ANY, "%s: couldn't wakeup chip\n", 131 __func__); 132 ecode = HAL_EIO; 133 goto bad; 134 } 135 /* Read Revisions from Chips before taking out of reset */ 136 val = OS_REG_READ(ah, AR_SREV); 137 HALDEBUG(ah, HAL_DEBUG_ATTACH, 138 "%s: ID 0x%x VERSION 0x%x TYPE 0x%x REVISION 0x%x\n", 139 __func__, MS(val, AR_XSREV_ID), MS(val, AR_XSREV_VERSION), 140 MS(val, AR_XSREV_TYPE), MS(val, AR_XSREV_REVISION)); 141 /* NB: include chip type to differentiate from pre-Sowl versions */ 142 AH_PRIVATE(ah)->ah_macVersion = 143 (val & AR_XSREV_VERSION) >> AR_XSREV_TYPE_S; 144 AH_PRIVATE(ah)->ah_macRev = MS(val, AR_XSREV_REVISION); 145 AH_PRIVATE(ah)->ah_ispcie = (val & AR_XSREV_TYPE_HOST_MODE) == 0; 146 147 /* setup common ini data; rf backends handle remainder */ 148 if (AR_SREV_MERLIN_20_OR_LATER(ah)) { 149 HAL_INI_INIT(&ahp->ah_ini_modes, ar9280Modes_v2, 6); 150 HAL_INI_INIT(&ahp->ah_ini_common, ar9280Common_v2, 2); 151 HAL_INI_INIT(&AH5416(ah)->ah_ini_pcieserdes, 152 ar9280PciePhy_clkreq_always_on_L1_v2, 2); 153 HAL_INI_INIT(&ahp9280->ah_ini_xmodes, 154 ar9280Modes_fast_clock_v2, 3); 155 } else { 156 HAL_INI_INIT(&ahp->ah_ini_modes, ar9280Modes_v1, 6); 157 HAL_INI_INIT(&ahp->ah_ini_common, ar9280Common_v1, 2); 158 HAL_INI_INIT(&AH5416(ah)->ah_ini_pcieserdes, 159 ar9280PciePhy_v1, 2); 160 } 161 ar5416AttachPCIE(ah); 162 163 ecode = ath_hal_v14EepromAttach(ah); 164 if (ecode != HAL_OK) 165 goto bad; 166 167 if (!ar5416ChipReset(ah, AH_NULL)) { /* reset chip */ 168 HALDEBUG(ah, HAL_DEBUG_ANY, "%s: chip reset failed\n", __func__); 169 ecode = HAL_EIO; 170 goto bad; 171 } 172 173 AH_PRIVATE(ah)->ah_phyRev = OS_REG_READ(ah, AR_PHY_CHIP_ID); 174 175 if (!ar5212ChipTest(ah)) { 176 HALDEBUG(ah, HAL_DEBUG_ANY, "%s: hardware self-test failed\n", 177 __func__); 178 ecode = HAL_ESELFTEST; 179 goto bad; 180 } 181 182 /* 183 * Set correct Baseband to analog shift 184 * setting to access analog chips. 185 */ 186 OS_REG_WRITE(ah, AR_PHY(0), 0x00000007); 187 188 /* Read Radio Chip Rev Extract */ 189 AH_PRIVATE(ah)->ah_analog5GhzRev = ar5416GetRadioRev(ah); 190 switch (AH_PRIVATE(ah)->ah_analog5GhzRev & AR_RADIO_SREV_MAJOR) { 191 case AR_RAD2133_SREV_MAJOR: /* Sowl: 2G/3x3 */ 192 case AR_RAD5133_SREV_MAJOR: /* Sowl: 2+5G/3x3 */ 193 break; 194 default: 195 if (AH_PRIVATE(ah)->ah_analog5GhzRev == 0) { 196 AH_PRIVATE(ah)->ah_analog5GhzRev = 197 AR_RAD5133_SREV_MAJOR; 198 break; 199 } 200#ifdef AH_DEBUG 201 HALDEBUG(ah, HAL_DEBUG_ANY, 202 "%s: 5G Radio Chip Rev 0x%02X is not supported by " 203 "this driver\n", __func__, 204 AH_PRIVATE(ah)->ah_analog5GhzRev); 205 ecode = HAL_ENOTSUPP; 206 goto bad; 207#endif 208 } 209 rfStatus = ar9280RfAttach(ah, &ecode); 210 if (!rfStatus) { 211 HALDEBUG(ah, HAL_DEBUG_ANY, "%s: RF setup failed, status %u\n", 212 __func__, ecode); 213 goto bad; 214 } 215 216 if (AR_SREV_MERLIN_20_OR_LATER(ah)) { 217 /* setup rxgain table */ 218 switch (ath_hal_eepromGet(ah, AR_EEP_RXGAIN_TYPE, AH_NULL)) { 219 case AR5416_EEP_RXGAIN_13dB_BACKOFF: 220 HAL_INI_INIT(&ahp9280->ah_ini_rxgain, 221 ar9280Modes_backoff_13db_rxgain_v2, 6); 222 break; 223 case AR5416_EEP_RXGAIN_23dB_BACKOFF: 224 HAL_INI_INIT(&ahp9280->ah_ini_rxgain, 225 ar9280Modes_backoff_23db_rxgain_v2, 6); 226 break; 227 case AR5416_EEP_RXGAIN_ORIG: 228 HAL_INI_INIT(&ahp9280->ah_ini_rxgain, 229 ar9280Modes_original_rxgain_v2, 6); 230 break; 231 default: 232 HALASSERT(AH_FALSE); 233 goto bad; /* XXX ? try to continue */ 234 } 235 } 236 if (AR_SREV_MERLIN_20_OR_LATER(ah)) { 237 /* setp txgain table */ 238 switch (ath_hal_eepromGet(ah, AR_EEP_TXGAIN_TYPE, AH_NULL)) { 239 case AR5416_EEP_TXGAIN_HIGH_POWER: 240 HAL_INI_INIT(&ahp9280->ah_ini_txgain, 241 ar9280Modes_high_power_tx_gain_v2, 6); 242 break; 243 case AR5416_EEP_TXGAIN_ORIG: 244 HAL_INI_INIT(&ahp9280->ah_ini_txgain, 245 ar9280Modes_original_tx_gain_v2, 6); 246 break; 247 default: 248 HALASSERT(AH_FALSE); 249 goto bad; /* XXX ? try to continue */ 250 } 251 } 252 253 /* 254 * Got everything we need now to setup the capabilities. 255 */ 256 if (!ar9280FillCapabilityInfo(ah)) { 257 ecode = HAL_EEREAD; 258 goto bad; 259 } 260 261 ecode = ath_hal_eepromGet(ah, AR_EEP_MACADDR, ahp->ah_macaddr); 262 if (ecode != HAL_OK) { 263 HALDEBUG(ah, HAL_DEBUG_ANY, 264 "%s: error getting mac address from EEPROM\n", __func__); 265 goto bad; 266 } 267 /* XXX How about the serial number ? */ 268 /* Read Reg Domain */ 269 AH_PRIVATE(ah)->ah_currentRD = 270 ath_hal_eepromGet(ah, AR_EEP_REGDMN_0, AH_NULL); 271 272 /* 273 * ah_miscMode is populated by ar5416FillCapabilityInfo() 274 * starting from griffin. Set here to make sure that 275 * AR_MISC_MODE_MIC_NEW_LOC_ENABLE is set before a GTK is 276 * placed into hardware. 277 */ 278 if (ahp->ah_miscMode != 0) 279 OS_REG_WRITE(ah, AR_MISC_MODE, ahp->ah_miscMode); 280 281 ar9280AniSetup(ah); /* Anti Noise Immunity */ 282 ar5416InitNfHistBuff(AH5416(ah)->ah_cal.nfCalHist); 283 284 HALDEBUG(ah, HAL_DEBUG_ATTACH, "%s: return\n", __func__); 285 286 return ah; 287bad: 288 if (ah != AH_NULL) 289 ah->ah_detach(ah); 290 if (status) 291 *status = ecode; 292 return AH_NULL; 293} 294 295static void 296ar9280ConfigPCIE(struct ath_hal *ah, HAL_BOOL restore) 297{ 298 if (AH_PRIVATE(ah)->ah_ispcie && !restore) { 299 ath_hal_ini_write(ah, &AH5416(ah)->ah_ini_pcieserdes, 1, 0); 300 OS_DELAY(1000); 301 OS_REG_SET_BIT(ah, AR_PCIE_PM_CTRL, AR_PCIE_PM_CTRL_ENA); 302 OS_REG_WRITE(ah, AR_WA, AR9280_WA_DEFAULT); 303 } 304} 305 306static void 307ar9280WriteIni(struct ath_hal *ah, const struct ieee80211_channel *chan) 308{ 309 u_int modesIndex, freqIndex; 310 int regWrites = 0; 311 312 /* Setup the indices for the next set of register array writes */ 313 /* XXX Ignore 11n dynamic mode on the AR5416 for the moment */ 314 if (IEEE80211_IS_CHAN_2GHZ(chan)) { 315 freqIndex = 2; 316 if (IEEE80211_IS_CHAN_HT40(chan)) 317 modesIndex = 3; 318 else if (IEEE80211_IS_CHAN_108G(chan)) 319 modesIndex = 5; 320 else 321 modesIndex = 4; 322 } else { 323 freqIndex = 1; 324 if (IEEE80211_IS_CHAN_HT40(chan) || 325 IEEE80211_IS_CHAN_TURBO(chan)) 326 modesIndex = 2; 327 else 328 modesIndex = 1; 329 } 330 331 /* Set correct Baseband to analog shift setting to access analog chips. */ 332 OS_REG_WRITE(ah, AR_PHY(0), 0x00000007); 333 OS_REG_WRITE(ah, AR_PHY_ADC_SERIAL_CTL, AR_PHY_SEL_INTERNAL_ADDAC); 334 335 /* XXX Merlin ini fixups */ 336 /* XXX Merlin 100us delay for shift registers */ 337 regWrites = ath_hal_ini_write(ah, &AH5212(ah)->ah_ini_modes, 338 modesIndex, regWrites); 339 if (AR_SREV_MERLIN_20_OR_LATER(ah)) { 340 regWrites = ath_hal_ini_write(ah, &AH9280(ah)->ah_ini_rxgain, 341 modesIndex, regWrites); 342 regWrites = ath_hal_ini_write(ah, &AH9280(ah)->ah_ini_txgain, 343 modesIndex, regWrites); 344 } 345 /* XXX Merlin 100us delay for shift registers */ 346 regWrites = ath_hal_ini_write(ah, &AH5212(ah)->ah_ini_common, 347 1, regWrites); 348 349 if (AR_SREV_MERLIN_20(ah) && IS_5GHZ_FAST_CLOCK_EN(ah, chan)) { 350 /* 5GHz channels w/ Fast Clock use different modal values */ 351 regWrites = ath_hal_ini_write(ah, &AH9280(ah)->ah_ini_xmodes, 352 modesIndex, regWrites); 353 } 354} 355 356#define AR_BASE_FREQ_2GHZ 2300 357#define AR_BASE_FREQ_5GHZ 4900 358#define AR_SPUR_FEEQ_BOUND_HT40 19 359#define AR_SPUR_FEEQ_BOUND_HT20 10 360 361void 362ar9280SpurMitigate(struct ath_hal *ah, const struct ieee80211_channel *chan) 363{ 364 static const int pilot_mask_reg[4] = { AR_PHY_TIMING7, AR_PHY_TIMING8, 365 AR_PHY_PILOT_MASK_01_30, AR_PHY_PILOT_MASK_31_60 }; 366 static const int chan_mask_reg[4] = { AR_PHY_TIMING9, AR_PHY_TIMING10, 367 AR_PHY_CHANNEL_MASK_01_30, AR_PHY_CHANNEL_MASK_31_60 }; 368 static int inc[4] = { 0, 100, 0, 0 }; 369 370 int bb_spur = AR_NO_SPUR; 371 int freq; 372 int bin, cur_bin; 373 int bb_spur_off, spur_subchannel_sd; 374 int spur_freq_sd; 375 int spur_delta_phase; 376 int denominator; 377 int upper, lower, cur_vit_mask; 378 int tmp, newVal; 379 int i; 380 CHAN_CENTERS centers; 381 382 int8_t mask_m[123]; 383 int8_t mask_p[123]; 384 int8_t mask_amt; 385 int tmp_mask; 386 int cur_bb_spur; 387 HAL_BOOL is2GHz = IEEE80211_IS_CHAN_2GHZ(chan); 388 389 OS_MEMZERO(&mask_m, sizeof(int8_t) * 123); 390 OS_MEMZERO(&mask_p, sizeof(int8_t) * 123); 391 392 ar5416GetChannelCenters(ah, chan, ¢ers); 393 freq = centers.synth_center; 394 395 /* 396 * Need to verify range +/- 9.38 for static ht20 and +/- 18.75 for ht40, 397 * otherwise spur is out-of-band and can be ignored. 398 */ 399 for (i = 0; i < AR5416_EEPROM_MODAL_SPURS; i++) { 400 cur_bb_spur = ath_hal_getSpurChan(ah, i, is2GHz); 401 /* Get actual spur freq in MHz from EEPROM read value */ 402 if (is2GHz) { 403 cur_bb_spur = (cur_bb_spur / 10) + AR_BASE_FREQ_2GHZ; 404 } else { 405 cur_bb_spur = (cur_bb_spur / 10) + AR_BASE_FREQ_5GHZ; 406 } 407 408 if (AR_NO_SPUR == cur_bb_spur) 409 break; 410 cur_bb_spur = cur_bb_spur - freq; 411 412 if (IEEE80211_IS_CHAN_HT40(chan)) { 413 if ((cur_bb_spur > -AR_SPUR_FEEQ_BOUND_HT40) && 414 (cur_bb_spur < AR_SPUR_FEEQ_BOUND_HT40)) { 415 bb_spur = cur_bb_spur; 416 break; 417 } 418 } else if ((cur_bb_spur > -AR_SPUR_FEEQ_BOUND_HT20) && 419 (cur_bb_spur < AR_SPUR_FEEQ_BOUND_HT20)) { 420 bb_spur = cur_bb_spur; 421 break; 422 } 423 } 424 425 if (AR_NO_SPUR == bb_spur) { 426#if 1 427 /* 428 * MRC CCK can interfere with beacon detection and cause deaf/mute. 429 * Disable MRC CCK for now. 430 */ 431 OS_REG_CLR_BIT(ah, AR_PHY_FORCE_CLKEN_CCK, AR_PHY_FORCE_CLKEN_CCK_MRC_MUX); 432#else 433 /* Enable MRC CCK if no spur is found in this channel. */ 434 OS_REG_SET_BIT(ah, AR_PHY_FORCE_CLKEN_CCK, AR_PHY_FORCE_CLKEN_CCK_MRC_MUX); 435#endif 436 return; 437 } else { 438 /* 439 * For Merlin, spur can break CCK MRC algorithm. Disable CCK MRC if spur 440 * is found in this channel. 441 */ 442 OS_REG_CLR_BIT(ah, AR_PHY_FORCE_CLKEN_CCK, AR_PHY_FORCE_CLKEN_CCK_MRC_MUX); 443 } 444 445 bin = bb_spur * 320; 446 447 tmp = OS_REG_READ(ah, AR_PHY_TIMING_CTRL4_CHAIN(0)); 448 449 newVal = tmp | (AR_PHY_TIMING_CTRL4_ENABLE_SPUR_RSSI | 450 AR_PHY_TIMING_CTRL4_ENABLE_SPUR_FILTER | 451 AR_PHY_TIMING_CTRL4_ENABLE_CHAN_MASK | 452 AR_PHY_TIMING_CTRL4_ENABLE_PILOT_MASK); 453 OS_REG_WRITE(ah, AR_PHY_TIMING_CTRL4_CHAIN(0), newVal); 454 455 newVal = (AR_PHY_SPUR_REG_MASK_RATE_CNTL | 456 AR_PHY_SPUR_REG_ENABLE_MASK_PPM | 457 AR_PHY_SPUR_REG_MASK_RATE_SELECT | 458 AR_PHY_SPUR_REG_ENABLE_VIT_SPUR_RSSI | 459 SM(AR5416_SPUR_RSSI_THRESH, AR_PHY_SPUR_REG_SPUR_RSSI_THRESH)); 460 OS_REG_WRITE(ah, AR_PHY_SPUR_REG, newVal); 461 462 /* Pick control or extn channel to cancel the spur */ 463 if (IEEE80211_IS_CHAN_HT40(chan)) { 464 if (bb_spur < 0) { 465 spur_subchannel_sd = 1; 466 bb_spur_off = bb_spur + 10; 467 } else { 468 spur_subchannel_sd = 0; 469 bb_spur_off = bb_spur - 10; 470 } 471 } else { 472 spur_subchannel_sd = 0; 473 bb_spur_off = bb_spur; 474 } 475 476 /* 477 * spur_delta_phase = bb_spur/40 * 2**21 for static ht20, 478 * /80 for dyn2040. 479 */ 480 if (IEEE80211_IS_CHAN_HT40(chan)) 481 spur_delta_phase = ((bb_spur * 262144) / 10) & AR_PHY_TIMING11_SPUR_DELTA_PHASE; 482 else 483 spur_delta_phase = ((bb_spur * 524288) / 10) & AR_PHY_TIMING11_SPUR_DELTA_PHASE; 484 485 /* 486 * in 11A mode the denominator of spur_freq_sd should be 40 and 487 * it should be 44 in 11G 488 */ 489 denominator = IEEE80211_IS_CHAN_2GHZ(chan) ? 44 : 40; 490 spur_freq_sd = ((bb_spur_off * 2048) / denominator) & 0x3ff; 491 492 newVal = (AR_PHY_TIMING11_USE_SPUR_IN_AGC | 493 SM(spur_freq_sd, AR_PHY_TIMING11_SPUR_FREQ_SD) | 494 SM(spur_delta_phase, AR_PHY_TIMING11_SPUR_DELTA_PHASE)); 495 OS_REG_WRITE(ah, AR_PHY_TIMING11, newVal); 496 497 /* Choose to cancel between control and extension channels */ 498 newVal = spur_subchannel_sd << AR_PHY_SFCORR_SPUR_SUBCHNL_SD_S; 499 OS_REG_WRITE(ah, AR_PHY_SFCORR_EXT, newVal); 500 501 /* 502 * ============================================ 503 * Set Pilot and Channel Masks 504 * 505 * pilot mask 1 [31:0] = +6..-26, no 0 bin 506 * pilot mask 2 [19:0] = +26..+7 507 * 508 * channel mask 1 [31:0] = +6..-26, no 0 bin 509 * channel mask 2 [19:0] = +26..+7 510 */ 511 cur_bin = -6000; 512 upper = bin + 100; 513 lower = bin - 100; 514 515 for (i = 0; i < 4; i++) { 516 int pilot_mask = 0; 517 int chan_mask = 0; 518 int bp = 0; 519 for (bp = 0; bp < 30; bp++) { 520 if ((cur_bin > lower) && (cur_bin < upper)) { 521 pilot_mask = pilot_mask | 0x1 << bp; 522 chan_mask = chan_mask | 0x1 << bp; 523 } 524 cur_bin += 100; 525 } 526 cur_bin += inc[i]; 527 OS_REG_WRITE(ah, pilot_mask_reg[i], pilot_mask); 528 OS_REG_WRITE(ah, chan_mask_reg[i], chan_mask); 529 } 530 531 /* ================================================= 532 * viterbi mask 1 based on channel magnitude 533 * four levels 0-3 534 * - mask (-27 to 27) (reg 64,0x9900 to 67,0x990c) 535 * [1 2 2 1] for -9.6 or [1 2 1] for +16 536 * - enable_mask_ppm, all bins move with freq 537 * 538 * - mask_select, 8 bits for rates (reg 67,0x990c) 539 * - mask_rate_cntl, 8 bits for rates (reg 67,0x990c) 540 * choose which mask to use mask or mask2 541 */ 542 543 /* 544 * viterbi mask 2 2nd set for per data rate puncturing 545 * four levels 0-3 546 * - mask_select, 8 bits for rates (reg 67) 547 * - mask (-27 to 27) (reg 98,0x9988 to 101,0x9994) 548 * [1 2 2 1] for -9.6 or [1 2 1] for +16 549 */ 550 cur_vit_mask = 6100; 551 upper = bin + 120; 552 lower = bin - 120; 553 554 for (i = 0; i < 123; i++) { 555 if ((cur_vit_mask > lower) && (cur_vit_mask < upper)) { 556 if ((abs(cur_vit_mask - bin)) < 75) { 557 mask_amt = 1; 558 } else { 559 mask_amt = 0; 560 } 561 if (cur_vit_mask < 0) { 562 mask_m[abs(cur_vit_mask / 100)] = mask_amt; 563 } else { 564 mask_p[cur_vit_mask / 100] = mask_amt; 565 } 566 } 567 cur_vit_mask -= 100; 568 } 569 570 tmp_mask = (mask_m[46] << 30) | (mask_m[47] << 28) 571 | (mask_m[48] << 26) | (mask_m[49] << 24) 572 | (mask_m[50] << 22) | (mask_m[51] << 20) 573 | (mask_m[52] << 18) | (mask_m[53] << 16) 574 | (mask_m[54] << 14) | (mask_m[55] << 12) 575 | (mask_m[56] << 10) | (mask_m[57] << 8) 576 | (mask_m[58] << 6) | (mask_m[59] << 4) 577 | (mask_m[60] << 2) | (mask_m[61] << 0); 578 OS_REG_WRITE(ah, AR_PHY_BIN_MASK_1, tmp_mask); 579 OS_REG_WRITE(ah, AR_PHY_VIT_MASK2_M_46_61, tmp_mask); 580 581 tmp_mask = (mask_m[31] << 28) 582 | (mask_m[32] << 26) | (mask_m[33] << 24) 583 | (mask_m[34] << 22) | (mask_m[35] << 20) 584 | (mask_m[36] << 18) | (mask_m[37] << 16) 585 | (mask_m[48] << 14) | (mask_m[39] << 12) 586 | (mask_m[40] << 10) | (mask_m[41] << 8) 587 | (mask_m[42] << 6) | (mask_m[43] << 4) 588 | (mask_m[44] << 2) | (mask_m[45] << 0); 589 OS_REG_WRITE(ah, AR_PHY_BIN_MASK_2, tmp_mask); 590 OS_REG_WRITE(ah, AR_PHY_MASK2_M_31_45, tmp_mask); 591 592 tmp_mask = (mask_m[16] << 30) | (mask_m[16] << 28) 593 | (mask_m[18] << 26) | (mask_m[18] << 24) 594 | (mask_m[20] << 22) | (mask_m[20] << 20) 595 | (mask_m[22] << 18) | (mask_m[22] << 16) 596 | (mask_m[24] << 14) | (mask_m[24] << 12) 597 | (mask_m[25] << 10) | (mask_m[26] << 8) 598 | (mask_m[27] << 6) | (mask_m[28] << 4) 599 | (mask_m[29] << 2) | (mask_m[30] << 0); 600 OS_REG_WRITE(ah, AR_PHY_BIN_MASK_3, tmp_mask); 601 OS_REG_WRITE(ah, AR_PHY_MASK2_M_16_30, tmp_mask); 602 603 tmp_mask = (mask_m[ 0] << 30) | (mask_m[ 1] << 28) 604 | (mask_m[ 2] << 26) | (mask_m[ 3] << 24) 605 | (mask_m[ 4] << 22) | (mask_m[ 5] << 20) 606 | (mask_m[ 6] << 18) | (mask_m[ 7] << 16) 607 | (mask_m[ 8] << 14) | (mask_m[ 9] << 12) 608 | (mask_m[10] << 10) | (mask_m[11] << 8) 609 | (mask_m[12] << 6) | (mask_m[13] << 4) 610 | (mask_m[14] << 2) | (mask_m[15] << 0); 611 OS_REG_WRITE(ah, AR_PHY_MASK_CTL, tmp_mask); 612 OS_REG_WRITE(ah, AR_PHY_MASK2_M_00_15, tmp_mask); 613 614 tmp_mask = (mask_p[15] << 28) 615 | (mask_p[14] << 26) | (mask_p[13] << 24) 616 | (mask_p[12] << 22) | (mask_p[11] << 20) 617 | (mask_p[10] << 18) | (mask_p[ 9] << 16) 618 | (mask_p[ 8] << 14) | (mask_p[ 7] << 12) 619 | (mask_p[ 6] << 10) | (mask_p[ 5] << 8) 620 | (mask_p[ 4] << 6) | (mask_p[ 3] << 4) 621 | (mask_p[ 2] << 2) | (mask_p[ 1] << 0); 622 OS_REG_WRITE(ah, AR_PHY_BIN_MASK2_1, tmp_mask); 623 OS_REG_WRITE(ah, AR_PHY_MASK2_P_15_01, tmp_mask); 624 625 tmp_mask = (mask_p[30] << 28) 626 | (mask_p[29] << 26) | (mask_p[28] << 24) 627 | (mask_p[27] << 22) | (mask_p[26] << 20) 628 | (mask_p[25] << 18) | (mask_p[24] << 16) 629 | (mask_p[23] << 14) | (mask_p[22] << 12) 630 | (mask_p[21] << 10) | (mask_p[20] << 8) 631 | (mask_p[19] << 6) | (mask_p[18] << 4) 632 | (mask_p[17] << 2) | (mask_p[16] << 0); 633 OS_REG_WRITE(ah, AR_PHY_BIN_MASK2_2, tmp_mask); 634 OS_REG_WRITE(ah, AR_PHY_MASK2_P_30_16, tmp_mask); 635 636 tmp_mask = (mask_p[45] << 28) 637 | (mask_p[44] << 26) | (mask_p[43] << 24) 638 | (mask_p[42] << 22) | (mask_p[41] << 20) 639 | (mask_p[40] << 18) | (mask_p[39] << 16) 640 | (mask_p[38] << 14) | (mask_p[37] << 12) 641 | (mask_p[36] << 10) | (mask_p[35] << 8) 642 | (mask_p[34] << 6) | (mask_p[33] << 4) 643 | (mask_p[32] << 2) | (mask_p[31] << 0); 644 OS_REG_WRITE(ah, AR_PHY_BIN_MASK2_3, tmp_mask); 645 OS_REG_WRITE(ah, AR_PHY_MASK2_P_45_31, tmp_mask); 646 647 tmp_mask = (mask_p[61] << 30) | (mask_p[60] << 28) 648 | (mask_p[59] << 26) | (mask_p[58] << 24) 649 | (mask_p[57] << 22) | (mask_p[56] << 20) 650 | (mask_p[55] << 18) | (mask_p[54] << 16) 651 | (mask_p[53] << 14) | (mask_p[52] << 12) 652 | (mask_p[51] << 10) | (mask_p[50] << 8) 653 | (mask_p[49] << 6) | (mask_p[48] << 4) 654 | (mask_p[47] << 2) | (mask_p[46] << 0); 655 OS_REG_WRITE(ah, AR_PHY_BIN_MASK2_4, tmp_mask); 656 OS_REG_WRITE(ah, AR_PHY_MASK2_P_61_45, tmp_mask); 657} 658 659/* 660 * Fill all software cached or static hardware state information. 661 * Return failure if capabilities are to come from EEPROM and 662 * cannot be read. 663 */ 664static HAL_BOOL 665ar9280FillCapabilityInfo(struct ath_hal *ah) 666{ 667 HAL_CAPABILITIES *pCap = &AH_PRIVATE(ah)->ah_caps; 668 669 if (!ar5416FillCapabilityInfo(ah)) 670 return AH_FALSE; 671 pCap->halNumGpioPins = 10; 672 pCap->halWowSupport = AH_TRUE; 673 pCap->halWowMatchPatternExact = AH_TRUE; 674#if 0 675 pCap->halWowMatchPatternDword = AH_TRUE; 676#endif 677 pCap->halCSTSupport = AH_TRUE; 678 pCap->halRifsRxSupport = AH_TRUE; 679 pCap->halRifsTxSupport = AH_TRUE; 680 pCap->halRtsAggrLimit = 64*1024; /* 802.11n max */ 681 pCap->halExtChanDfsSupport = AH_TRUE; 682#if 0 683 /* XXX bluetooth */ 684 pCap->halBtCoexSupport = AH_TRUE; 685#endif 686 pCap->halAutoSleepSupport = AH_FALSE; /* XXX? */ 687#if 0 688 pCap->hal4kbSplitTransSupport = AH_FALSE; 689#endif 690 pCap->halRxStbcSupport = 1; 691 pCap->halTxStbcSupport = 1; 692 693 return AH_TRUE; 694} 695 696HAL_BOOL 697ar9280SetAntennaSwitch(struct ath_hal *ah, HAL_ANT_SETTING settings) 698{ 699#define ANTENNA0_CHAINMASK 0x1 700#define ANTENNA1_CHAINMASK 0x2 701 struct ath_hal_5416 *ahp = AH5416(ah); 702 703 /* Antenna selection is done by setting the tx/rx chainmasks approp. */ 704 switch (settings) { 705 case HAL_ANT_FIXED_A: 706 /* Enable first antenna only */ 707 ahp->ah_tx_chainmask = ANTENNA0_CHAINMASK; 708 ahp->ah_rx_chainmask = ANTENNA0_CHAINMASK; 709 break; 710 case HAL_ANT_FIXED_B: 711 /* Enable second antenna only, after checking capability */ 712 if (AH_PRIVATE(ah)->ah_caps.halTxChainMask > ANTENNA1_CHAINMASK) 713 ahp->ah_tx_chainmask = ANTENNA1_CHAINMASK; 714 ahp->ah_rx_chainmask = ANTENNA1_CHAINMASK; 715 break; 716 case HAL_ANT_VARIABLE: 717 /* Restore original chainmask settings */ 718 /* XXX */ 719 ahp->ah_tx_chainmask = AR5416_DEFAULT_TXCHAINMASK; 720 ahp->ah_rx_chainmask = AR5416_DEFAULT_RXCHAINMASK; 721 break; 722 } 723 return AH_TRUE; 724#undef ANTENNA0_CHAINMASK 725#undef ANTENNA1_CHAINMASK 726} 727 728static const char* 729ar9280Probe(uint16_t vendorid, uint16_t devid) 730{ 731 if (vendorid == ATHEROS_VENDOR_ID && 732 (devid == AR9280_DEVID_PCI || devid == AR9280_DEVID_PCIE)) 733 return "Atheros 9280"; 734 return AH_NULL; 735} 736AH_CHIP(AR9280, ar9280Probe, ar9280Attach); 737