GENERIC revision 51530
1# 2# GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks 3# 4# For more information on this file, please read the handbook section on 5# Kernel Configuration Files: 6# 7# http://www.freebsd.org/handbook/kernelconfig-config.html 8# 9# The handbook is also available locally in /usr/share/doc/handbook 10# if you've installed the doc distribution, otherwise always see the 11# FreeBSD World Wide Web server (http://www.FreeBSD.ORG/) for the 12# latest information. 13# 14# An exhaustive list of options and more detailed explanations of the 15# device lines is also present in the ./LINT configuration file. If you are 16# in doubt as to the purpose or necessity of a line, check first in LINT. 17# 18# $FreeBSD: head/sys/amd64/conf/GENERIC 51530 1999-09-22 05:07:51Z wpaul $ 19 20machine i386 21cpu I386_CPU 22cpu I486_CPU 23cpu I586_CPU 24cpu I686_CPU 25ident GENERIC 26maxusers 32 27 28#makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols 29 30options MATH_EMULATE #Support for x87 emulation 31options INET #InterNETworking 32options FFS #Berkeley Fast Filesystem 33options FFS_ROOT #FFS usable as root device [keep this!] 34options MFS #Memory Filesystem 35options MFS_ROOT #MFS usable as root device, "MFS" req'ed 36options NFS #Network Filesystem 37options NFS_ROOT #NFS usable as root device, "NFS" req'ed 38options MSDOSFS #MSDOS Filesystem 39options CD9660 #ISO 9660 Filesystem 40options CD9660_ROOT #CD-ROM usable as root. "CD9660" req'ed 41options PROCFS #Process filesystem 42options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] 43options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device 44options UCONSOLE #Allow users to grab the console 45options USERCONFIG #boot -c editor 46options VISUAL_USERCONFIG #visual boot -c editor 47options KTRACE #ktrace(1) syscall trace support 48options SYSVSHM #SYSV-style shared memory 49options SYSVMSG #SYSV-style message queues 50options SYSVSEM #SYSV-style semaphores 51 52# To make an SMP kernel, the next two are needed 53#options SMP # Symmetric MultiProcessor Kernel 54#options APIC_IO # Symmetric (APIC) I/O 55# Optionally these may need tweaked, (defaults shown): 56#options NCPU=2 # number of CPUs 57#options NBUS=4 # number of busses 58#options NAPIC=1 # number of IO APICs 59#options NINTR=24 # number of INTs 60 61controller isa0 62controller pnp0 # PnP support for ISA 63controller eisa0 64controller pci0 65 66# Floppy drives 67controller fdc0 at isa? port IO_FD1 irq 6 drq 2 68disk fd0 at fdc0 drive 0 69disk fd1 at fdc0 drive 1 70 71# IDE controller and disks 72controller wdc0 at isa? port IO_WD1 irq 14 73disk wd0 at wdc0 drive 0 74disk wd1 at wdc0 drive 1 75 76controller wdc1 at isa? port IO_WD2 irq 15 77disk wd2 at wdc1 drive 0 78disk wd3 at wdc1 drive 1 79 80# ATAPI devices on wdc? 81device wcd0 #IDE CD-ROM 82device wfd0 #IDE Floppy (e.g. LS-120) 83device wst0 #IDE Tape (e.g. Travan) 84 85# SCSI Controllers 86# A single entry for any of these controllers (ncr, ahb, ahc) is 87# sufficient for any number of installed devices. 88controller ncr0 # NCR/Symbios Logic 89controller ahb0 # EISA AHA1742 family 90controller ahc0 # AHA2940 and onboard AIC7xxx devices 91controller amd0 # AMD 53C974 (Teckram DC-390(T)) 92controller isp0 # Qlogic family 93controller dpt0 # DPT Smartcache - See LINT for options! 94 95controller adv0 at isa? port ? irq ? 96controller adw0 97controller bt0 at isa? port ? irq ? 98controller aha0 at isa? port ? irq ? 99 100# SCSI peripherals 101# Only one of each of these is needed, they are dynamically allocated. 102controller scbus0 # SCSI bus (required) 103device da0 # Direct Access (disks) 104device sa0 # Sequential Access (tape etc) 105device cd0 # CD 106device pass0 # Passthrough device (direct SCSI access) 107 108# Proprietary or custom CD-ROM Interfaces 109device wt0 at isa? port 0x300 irq 5 drq 1 110device mcd0 at isa? port 0x300 irq 10 111device matcd0 at isa? port 0x230 112device scd0 at isa? port 0x230 113 114# atkbdc0 controls both the keyboard and the PS/2 mouse 115controller atkbdc0 at isa? port IO_KBD 116device atkbd0 at atkbdc? irq 1 117device psm0 at atkbdc? irq 12 118 119device vga0 at isa? port ? conflicts 120 121# splash screen/screen saver 122pseudo-device splash 123 124# syscons is the default console driver, resembling an SCO console 125device sc0 at isa? 126 127# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver 128#device vt0 at isa? 129#options XSERVER # support for X server 130#options FAT_CURSOR # start with block cursor 131# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines 132#options PCVT_SCANSET=2 # IBM keyboards are non-std 133 134# Floating point support - do not disable. 135device npx0 at nexus? port IO_NPX irq 13 136 137# Power management support (see LINT for more options) 138device apm0 at nexus? disable flags 0x31 # Advanced Power Management 139 140# PCCARD (PCMCIA) support 141#controller card0 142#device pcic0 at card? 143#device pcic1 at card? 144 145# Serial (COM) ports 146device sio0 at isa? port IO_COM1 flags 0x10 irq 4 147device sio1 at isa? port IO_COM2 irq 3 148device sio2 at isa? disable port IO_COM3 irq 5 149device sio3 at isa? disable port IO_COM4 irq 9 150 151# Parallel port 152device ppc0 at isa? port? flags 0x40 irq 7 153controller ppbus0 # Parallel port bus (required) 154device lpt0 # Printer 155device plip0 # TCP/IP over parallel 156device ppi0 # Parallel port interface device 157#controller vpo0 # Requires scbus and da0 158 159 160# PCI Ethernet NICs. 161device ax0 # ASIX AX88140A 162device de0 # DEC/Intel DC21x4x (``Tulip'') 163device fxp0 # Intel EtherExpress PRO/100B (82557, 82558) 164device mx0 # Macronix 98713/98715/98725 (``PMAC'') 165device pn0 # Lite-On 82c168/82c169 (``PNIC'') 166device tx0 # SMC 9432TX (83c170 ``EPIC'') 167device vx0 # 3Com 3c590, 3c595 (``Vortex'') 168 169# PCI Ethernet NICs that use the common MII bus controller code. 170controller miibus0 # MII bus support 171device al0 # ADMtek AL981/AN985 (``Comet''/``Centaur'') 172device dm0 # Davicom DM9100/DM9102 173device rl0 # RealTek 8129/8139 174device sf0 # Adaptec AIC-6915 (``Starfire'') 175device sis0 # Silicon Integrated Systems SiS 900/SiS 7016 176device ste0 # Sundance ST201 (D-Link DFE-550TX) 177device tl0 # Texas Instruments ThunderLAN 178device vr0 # VIA Rhine, Rhine II 179device wb0 # Winbond W89C840F 180device xl0 # 3Com 3c90x (``Boomerang'', ``Cyclone'') 181 182# ISA Ethernet NICs. 183# The probe order of these is presently determined by i386/isa/isa_compat.c. 184device ed0 at isa? port 0x280 irq 10 iomem 0xd8000 185device ie0 at isa? port 0x300 irq 10 iomem 0xd0000 186device ep0 at isa? port 0x300 irq 10 187device ex0 at isa? port? irq? 188device fe0 at isa? port 0x300 irq ? 189device le0 at isa? port 0x300 irq 5 iomem 0xd0000 190device lnc0 at isa? port 0x280 irq 10 drq 0 191device cs0 at isa? port 0x300 irq ? 192# requires PCCARD (PCMCIA) support to be activated 193#device xe0 at isa? port? irq ? 194 195# PCCARD NIC drivers. 196# ze and zp take over the pcic and cannot coexist with generic pccard 197# support, nor the ed and ep drivers they replace. 198#device ze0 at isa? port 0x300 irq 10 iomem 0xd8000 199#device zp0 at isa? port 0x300 irq 10 iomem 0xd8000 200 201# Pseudo devices - the number indicates how many units to allocated. 202pseudo-device loop # Network loopback 203pseudo-device ether # Ethernet support 204pseudo-device sl 1 # Kernel SLIP 205pseudo-device ppp 1 # Kernel PPP 206pseudo-device tun # Packet tunnel. 207pseudo-device pty # Pseudo-ttys (telnet etc) 208pseudo-device gzip # Exec gzipped a.out's 209 210# The `bpf' pseudo-device enables the Berkeley Packet Filter. 211# Be aware of the administrative consequences of enabling this! 212pseudo-device bpf #Berkeley packet filter 213 214# USB support 215#controller uhci0 # UHCI PCI->USB interface 216#controller ohci0 # OHCI PCI->USB interface 217#controller usb0 # USB Bus (required) 218#device ugen0 # Generic 219#device uhid0 # "Human Interface Devices" 220#device ukbd0 # Keyboard 221#device ulpt0 # Printer 222#controller umass0 # Disks/Mass storage - Requires scbus and da0 223#device ums0 # Mouse 224