GENERIC revision 47350
1# 2# GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks 3# 4# For more information read the handbook part System Administration -> 5# Configuring the FreeBSD Kernel -> The Configuration File. 6# The handbook is available in /usr/share/doc/handbook or online as 7# latest version from the FreeBSD World Wide Web server 8# <URL:http://www.FreeBSD.ORG/> 9# 10# An exhaustive list of options and more detailed explanations of the 11# device lines is present in the ./LINT configuration file. If you are 12# in doubt as to the purpose or necessity of a line, check first in LINT. 13# 14# $Id: GENERIC,v 1.171 1999/05/20 20:02:34 n_hibma Exp $ 15 16machine i386 17cpu I386_CPU 18cpu I486_CPU 19cpu I586_CPU 20cpu I686_CPU 21ident GENERIC 22maxusers 32 23 24#makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols 25 26options MATH_EMULATE #Support for x87 emulation 27options INET #InterNETworking 28options FFS #Berkeley Fast Filesystem 29options FFS_ROOT #FFS usable as root device [keep this!] 30options MFS #Memory Filesystem 31options MFS_ROOT #MFS usable as root device, "MFS" req'ed 32options NFS #Network Filesystem 33options NFS_ROOT #NFS usable as root device, "NFS" req'ed 34options MSDOSFS #MSDOS Filesystem 35options CD9660 #ISO 9660 Filesystem 36options CD9660_ROOT #CD-ROM usable as root. "CD9660" req'ed 37options PROCFS #Process filesystem 38options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] 39options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device 40options UCONSOLE #Allow users to grab the console 41options FAILSAFE #Be conservative 42options USERCONFIG #boot -c editor 43options VISUAL_USERCONFIG #visual boot -c editor 44 45# To make an SMP kernel, the next two are needed 46#options SMP # Symmetric MultiProcessor Kernel 47#options APIC_IO # Symmetric (APIC) I/O 48# Optionally these may need tweaked, (defaults shown): 49#options NCPU=2 # number of CPUs 50#options NBUS=4 # number of busses 51#options NAPIC=1 # number of IO APICs 52#options NINTR=24 # number of INTs 53 54controller isa0 55controller pnp0 # PnP support for ISA 56controller eisa0 57controller pci0 58 59controller fdc0 at isa? port IO_FD1 irq 6 drq 2 60disk fd0 at fdc0 drive 0 61disk fd1 at fdc0 drive 1 62 63controller wdc0 at isa? port IO_WD1 irq 14 64disk wd0 at wdc0 drive 0 65disk wd1 at wdc0 drive 1 66 67controller wdc1 at isa? port IO_WD2 irq 15 68disk wd2 at wdc1 drive 0 69disk wd3 at wdc1 drive 1 70 71# ATAPI devices on wdc? 72device wcd0 #IDE CD-ROM 73device wfd0 #IDE Floppy (e.g. LS-120) 74device wst0 #IDE Tape (e.g. Travan) 75 76# A single entry for any of these controllers (ncr, ahb, ahc) is 77# sufficient for any number of installed devices. 78controller ncr0 79controller ahb0 80controller ahc0 81controller isp0 82 83# This controller offers a number of configuration options, too many to 84# document here - see the LINT file in this directory and look up the 85# dpt0 entry there for much fuller documentation on this. 86controller dpt0 87 88controller adv0 at isa? port ? irq ? 89controller adw0 90controller bt0 at isa? port ? irq ? 91controller aha0 at isa? port ? irq ? 92 93controller scbus0 94 95device da0 #Only need one of these, the code dynamically grows 96device sa0 97device pass0 98device cd0 99 100device wt0 at isa? port 0x300 irq 5 drq 1 101device mcd0 at isa? port 0x300 irq 10 102 103controller matcd0 at isa? port 0x230 104 105device scd0 at isa? port 0x230 106 107# atkbdc0 controls both the keyboard and the PS/2 mouse 108controller atkbdc0 at isa? port IO_KBD 109device atkbd0 at atkbdc? irq 1 110device psm0 at atkbdc? irq 12 111 112device vga0 at isa? port ? conflicts 113 114# splash screen/screen saver 115pseudo-device splash 116 117# syscons is the default console driver, resembling an SCO console 118device sc0 at isa? 119 120# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver 121#device vt0 at isa? 122#options XSERVER # support for X server 123#options FAT_CURSOR # start with block cursor 124# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines 125#options PCVT_SCANSET=2 # IBM keyboards are non-std 126 127device npx0 at nexus? port IO_NPX irq 13 128 129# 130# Laptop support (see LINT for more options) 131# 132device apm0 at nexus? disable flags 0x31 # Advanced Power Management 133 134# PCCARD (PCMCIA) support 135#controller card0 136#device pcic0 at card? 137#device pcic1 at card? 138 139device sio0 at isa? port IO_COM1 flags 0x10 irq 4 140device sio1 at isa? port IO_COM2 irq 3 141device sio2 at isa? disable port IO_COM3 irq 5 142device sio3 at isa? disable port IO_COM4 irq 9 143 144# Parallel port 145device ppc0 at isa? port? flags 0x40 irq 7 146controller ppbus0 147device lpt0 at ppbus? 148device plip0 at ppbus? 149device ppi0 at ppbus? 150#controller vpo0 at ppbus? 151 152# 153# The following Ethernet NICs are all PCI devices. 154# 155device al0 # ADMtek AL981 (``Comet'') 156device ax0 # ASIX AX88140A 157device de0 # DEC/Intel DC21x4x (``Tulip'') 158device fxp0 # Intel EtherExpress PRO/100B (82557, 82558) 159device mx0 # Macronix 98713/98715/98725 (``PMAC'') 160device pn0 # Lite-On 82c168/82c169 (``PNIC'') 161device rl0 # RealTek 8129/8139 162device tl0 # Texas Instruments ThunderLAN 163device tx0 # SMC 9432TX (83c170 ``EPIC'') 164device vr0 # VIA Rhine, Rhine II 165device vx0 # 3Com 3c590, 3c595 (``Vortex'') 166device wb0 # Winbond W89C840F 167device xl0 # 3Com 3c90x (``Boomerang'', ``Cyclone'') 168 169# Order is important here due to intrusive probes, do *not* alphabetize 170# this list of network interfaces until the probes have been fixed. 171# Right now it appears that the ie0 must be probed before ep0. See 172# revision 1.20 of this file. 173device ed0 at isa? port 0x280 irq 10 iomem 0xd8000 174device ie0 at isa? port 0x300 irq 10 iomem 0xd0000 175device ep0 at isa? port 0x300 irq 10 176device ex0 at isa? port? irq? 177device fe0 at isa? port 0x300 irq ? 178device le0 at isa? port 0x300 irq 5 iomem 0xd0000 179device lnc0 at isa? port 0x280 irq 10 drq 0 180#device xe0 at isa? port? irq ? 181#device ze0 at isa? port 0x300 irq 10 iomem 0xd8000 182#device zp0 at isa? port 0x300 irq 10 iomem 0xd8000 183device cs0 at isa? port 0x300 irq ? 184 185pseudo-device loop 186pseudo-device ether 187pseudo-device sl 1 188pseudo-device ppp 1 189pseudo-device tun 1 190pseudo-device pty 16 191pseudo-device gzip # Exec gzipped a.out's 192 193# KTRACE enables the system-call tracing facility ktrace(2). 194# This adds 4 KB bloat to your kernel, and slightly increases 195# the costs of each syscall. 196options KTRACE #kernel tracing 197 198# This provides support for System V shared memory and message queues. 199# 200options SYSVSHM 201options SYSVMSG 202options SYSVSEM 203 204# The `bpfilter' pseudo-device enables the Berkeley Packet Filter. Be 205# aware of the legal and administrative consequences of enabling this 206# option. The number of devices determines the maximum number of 207# simultaneous BPF clients programs runnable. 208#pseudo-device bpfilter 4 #Berkeley packet filter 209 210# USB support 211#controller uhci0 212#controller ohci0 213#controller usb0 214# 215#device ugen0 216#device uhid0 217#device ukbd0 218#device ulpt0 219#controller umass0 220#device ums0 221