gettytab revision 747 
1#	from: @(#)gettytab	5.14 (Berkeley) 3/27/91
2#
3# Most of the table entries here are just copies of the old getty table,
4# it is by no means certain, or even likely, that any of them are optimal
5# for any purpose whatever.  Nor is it likely that more than a couple are
6# even correct.
7#
8# The default gettytab entry, used to set defaults for all other
9# entries, and in cases where getty is called with no table name
10#
11# cb, ce and ck are desirable on most crt's.  The non-crt entries need to
12# be changed to turn them off (cb@:ce@:ck@:).
13#
14# Parity defaults to even.  There ought to be more alternative entries with
15# no parity.  The Pc entry already has no parity..  The different parities
16# are:
17#     (none): same as even except -inpck instead of inpck for login.
18#     ep:     getty will use raw mode (cs8 -parenb) (unless rw is set) and
19#             fake parity.  login will use even parity (cs7 parenb -parodd).
20#     op:     same as ep except odd parity (cs7 parenb parodd) for login.
21#             op overrides ep.
22#     ap:     same as ep except -inpck instead of inpck for login.
23#             ap overrides op and ep.
24#     np:     1. don't fake parity in getty.  The fake parity garbles
25#                characters on non-terminals (like pccons) that don't
26#                support parity.  It would probably better for getty not to
27#                try to fake parity.  It could just use cbreak mode so as
28#                as not to force cs8 and let the hardware handle the parity.
29#                login has to be rely on the hardware anyway.
30#             2. set PASS8, giving cs8 -parenb -istrip -inpck.
31#     np:ep:  same as np except inpck.
32#     np:op:  same as np:ep except for parodd (but parodd is overridden).
33#     np:ap:  same as np except istrip.
34#
35default:\
36	:cb:ce:ck:fd#1000:im=\r\n   FreeBSD (%h) (%t)\r\n\r\n:sp#1200:
37
38#
39# Fixed speed entries
40#
41#	The "std.NNN" names are known to the special case
42#	portselector code in getty, however they can
43#	be assigned to any table desired.
44#	The "NNN-baud" names are known to the special case
45#	autobaud code in getty, and likewise can
46#	be assigned to any table desired (hopefully the same speed).
47#
48a|std.110|110-baud:\
49	:nd#1:cd#1:uc:sp#110:
50b|std.134|134.5-baud:\
51	:ep:nd#1:cd#2:ff#1:td#1:sp#134:ht:nl:
521|std.150|150-baud:\
53	:ep:nd#1:cd#2:td#1:fd#1:sp#150:ht:nl:lm=\E\72\6\6\17login\72 :
54c|std.300|300-baud:\
55	:nd#1:cd#1:sp#300:
56d|std.600|600-baud:\
57	:nd#1:cd#1:sp#600:
58f|std.1200|1200-baud:\
59	:fd#1:sp#1200:
606|std.2400|2400-baud:\
61	:sp#2400:
627|std.4800|4800-baud:\
63	:sp#4800:
642|std.9600|9600-baud:\
65	:sp#9600:
66g|std.19200|19200-baud:\
67	:sp#19200:
68std.38400|38400-baud:\
69	:sp#38400:
70std.57600|57600-baud:\
71	:sp#57600:
72std.115200|115200-baud:\
73	:sp#115200:
74
75#
76# Dial in rotary tables, speed selection via 'break'
77#
780|d300|Dial-300:\
79	:nx=d1200:cd#2:sp#300:
80d1200|Dial-1200:\
81	:nx=d150:fd#1:sp#1200:
82d150|Dial-150:\
83	:nx=d110:lm@:tc=150-baud:
84d110|Dial-110:\
85	:nx=d300:tc=300-baud:
86
87#
88# Fast dialup terminals, 2400/1200/300 rotary (can start either way)
89#
90D2400|d2400|Fast-Dial-2400:\
91	:nx=D1200:tc=2400-baud:
923|D1200|Fast-Dial-1200:\
93	:nx=D300:tc=1200-baud:
945|D300|Fast-Dial-300:\
95	:nx=D2400:tc=300-baud:
96
97#
98#telebit (19200)
99#
100t19200:\
101	:nx=t2400:tc=19200-baud:
102t2400:\
103	:nx=t1200:tc=2400-baud:
104t1200:\
105	:nx=t19200:tc=1200-baud:
106
107#
108#telebit (9600)
109#
110t9600:\
111	:nx=t2400a:tc=9600-baud:
112t2400a:\
113	:nx=t1200a:tc=2400-baud:
114t1200a:\
115	:nx=t9600:tc=1200-baud:
116
117#
118# Odd special case terminals
119#
120-|tty33|asr33|Pity the poor user of this beast:\
121	:tc=110-baud:
122
1234|Console|Console Decwriter II:\
124	:nd@:cd@:rw:tc=300-baud:
125
126e|Console-1200|Console Decwriter III:\
127	:fd@:nd@:cd@:rw:tc=1200-baud:
128
129i|Interdata console:\
130	:uc:sp#0:
131
132l|lsi chess terminal:\
133	:sp#300:
134
135X|Xwindow|X window system:\
136	:fd@:nd@:cd@:rw:sp#9600:
137
138P|Pc|Pc console:\
139	:np:sp#115200:
140
141#
142# Wierdo special case for fast crt's with hardcopy devices
143#
1448|T9600|CRT with hardcopy:\
145	:nx=T300:tc=9600-baud:
1469|T300|CRT with hardcopy (300):\
147	:nx=T9600:tc=300-baud:
148
149#
150# Plugboard, and misc other terminals
151#
152plug-9600|Plugboard-9600:\
153	:pf#1:tc=9600-baud:
154p|P9600|Plugboard-9600-rotary:\
155	:pf#1:nx=P300:tc=9600-baud:
156q|P300|Plugboard-300:\
157	:pf#1:nx=P1200:tc=300-baud:
158r|P1200|Plugboard-1200:\
159	:pf#1:nx=P9600:tc=1200-baud:
160
161#
162# XXXX Port selector
163#
164s|DSW|Port Selector:\
165	:ps:sp#2400:
166
167#
168# Auto-baud speed detect entry for Micom 600.
169# Special code in getty will switch this out
170# to one of the NNN-baud entries.
171#
172A|Auto-baud:\
173	:ab:sp#2400:f0#040:
174