mca.c revision 313165
1/*- 2 * Copyright (c) 2009 Hudson River Trading LLC 3 * Written by: John H. Baldwin <jhb@FreeBSD.org> 4 * All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 16 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 18 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 19 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 25 * SUCH DAMAGE. 26 */ 27 28/* 29 * Support for x86 machine check architecture. 30 */ 31 32#include <sys/cdefs.h> 33__FBSDID("$FreeBSD: stable/10/sys/x86/x86/mca.c 313165 2017-02-03 16:36:14Z pfg $"); 34 35#ifdef __amd64__ 36#define DEV_APIC 37#else 38#include "opt_apic.h" 39#endif 40 41#include <sys/param.h> 42#include <sys/bus.h> 43#include <sys/interrupt.h> 44#include <sys/kernel.h> 45#include <sys/lock.h> 46#include <sys/malloc.h> 47#include <sys/mutex.h> 48#include <sys/proc.h> 49#include <sys/sched.h> 50#include <sys/smp.h> 51#include <sys/sysctl.h> 52#include <sys/systm.h> 53#include <sys/taskqueue.h> 54#include <machine/intr_machdep.h> 55#include <machine/apicvar.h> 56#include <machine/cpu.h> 57#include <machine/cputypes.h> 58#include <x86/mca.h> 59#include <machine/md_var.h> 60#include <machine/specialreg.h> 61 62/* Modes for mca_scan() */ 63enum scan_mode { 64 POLLED, 65 MCE, 66 CMCI, 67}; 68 69#ifdef DEV_APIC 70/* 71 * State maintained for each monitored MCx bank to control the 72 * corrected machine check interrupt threshold. 73 */ 74struct cmc_state { 75 int max_threshold; 76 int last_intr; 77}; 78#endif 79 80struct mca_internal { 81 struct mca_record rec; 82 int logged; 83 STAILQ_ENTRY(mca_internal) link; 84}; 85 86static MALLOC_DEFINE(M_MCA, "MCA", "Machine Check Architecture"); 87 88static volatile int mca_count; /* Number of records stored. */ 89static int mca_banks; /* Number of per-CPU register banks. */ 90 91static SYSCTL_NODE(_hw, OID_AUTO, mca, CTLFLAG_RD, NULL, 92 "Machine Check Architecture"); 93 94static int mca_enabled = 1; 95TUNABLE_INT("hw.mca.enabled", &mca_enabled); 96SYSCTL_INT(_hw_mca, OID_AUTO, enabled, CTLFLAG_RDTUN, &mca_enabled, 0, 97 "Administrative toggle for machine check support"); 98 99static int amd10h_L1TP = 1; 100TUNABLE_INT("hw.mca.amd10h_L1TP", &amd10h_L1TP); 101SYSCTL_INT(_hw_mca, OID_AUTO, amd10h_L1TP, CTLFLAG_RDTUN, &amd10h_L1TP, 0, 102 "Administrative toggle for logging of level one TLB parity (L1TP) errors"); 103 104static int intel6h_HSD131; 105TUNABLE_INT("hw.mca.intel6h_hsd131", &intel6h_HSD131); 106SYSCTL_INT(_hw_mca, OID_AUTO, intel6h_HSD131, CTLFLAG_RDTUN, &intel6h_HSD131, 0, 107 "Administrative toggle for logging of spurious corrected errors"); 108 109int workaround_erratum383; 110SYSCTL_INT(_hw_mca, OID_AUTO, erratum383, CTLFLAG_RD, &workaround_erratum383, 0, 111 "Is the workaround for Erratum 383 on AMD Family 10h processors enabled?"); 112 113static STAILQ_HEAD(, mca_internal) mca_freelist; 114static int mca_freecount; 115static STAILQ_HEAD(, mca_internal) mca_records; 116static struct callout mca_timer; 117static int mca_ticks = 3600; /* Check hourly by default. */ 118static struct taskqueue *mca_tq; 119static struct task mca_refill_task, mca_scan_task; 120static struct mtx mca_lock; 121 122#ifdef DEV_APIC 123static struct cmc_state **cmc_state; /* Indexed by cpuid, bank */ 124static int cmc_throttle = 60; /* Time in seconds to throttle CMCI. */ 125#endif 126 127static int 128sysctl_positive_int(SYSCTL_HANDLER_ARGS) 129{ 130 int error, value; 131 132 value = *(int *)arg1; 133 error = sysctl_handle_int(oidp, &value, 0, req); 134 if (error || req->newptr == NULL) 135 return (error); 136 if (value <= 0) 137 return (EINVAL); 138 *(int *)arg1 = value; 139 return (0); 140} 141 142static int 143sysctl_mca_records(SYSCTL_HANDLER_ARGS) 144{ 145 int *name = (int *)arg1; 146 u_int namelen = arg2; 147 struct mca_record record; 148 struct mca_internal *rec; 149 int i; 150 151 if (namelen != 1) 152 return (EINVAL); 153 154 if (name[0] < 0 || name[0] >= mca_count) 155 return (EINVAL); 156 157 mtx_lock_spin(&mca_lock); 158 if (name[0] >= mca_count) { 159 mtx_unlock_spin(&mca_lock); 160 return (EINVAL); 161 } 162 i = 0; 163 STAILQ_FOREACH(rec, &mca_records, link) { 164 if (i == name[0]) { 165 record = rec->rec; 166 break; 167 } 168 i++; 169 } 170 mtx_unlock_spin(&mca_lock); 171 return (SYSCTL_OUT(req, &record, sizeof(record))); 172} 173 174static const char * 175mca_error_ttype(uint16_t mca_error) 176{ 177 178 switch ((mca_error & 0x000c) >> 2) { 179 case 0: 180 return ("I"); 181 case 1: 182 return ("D"); 183 case 2: 184 return ("G"); 185 } 186 return ("?"); 187} 188 189static const char * 190mca_error_level(uint16_t mca_error) 191{ 192 193 switch (mca_error & 0x0003) { 194 case 0: 195 return ("L0"); 196 case 1: 197 return ("L1"); 198 case 2: 199 return ("L2"); 200 case 3: 201 return ("LG"); 202 } 203 return ("L?"); 204} 205 206static const char * 207mca_error_request(uint16_t mca_error) 208{ 209 210 switch ((mca_error & 0x00f0) >> 4) { 211 case 0x0: 212 return ("ERR"); 213 case 0x1: 214 return ("RD"); 215 case 0x2: 216 return ("WR"); 217 case 0x3: 218 return ("DRD"); 219 case 0x4: 220 return ("DWR"); 221 case 0x5: 222 return ("IRD"); 223 case 0x6: 224 return ("PREFETCH"); 225 case 0x7: 226 return ("EVICT"); 227 case 0x8: 228 return ("SNOOP"); 229 } 230 return ("???"); 231} 232 233static const char * 234mca_error_mmtype(uint16_t mca_error) 235{ 236 237 switch ((mca_error & 0x70) >> 4) { 238 case 0x0: 239 return ("GEN"); 240 case 0x1: 241 return ("RD"); 242 case 0x2: 243 return ("WR"); 244 case 0x3: 245 return ("AC"); 246 case 0x4: 247 return ("MS"); 248 } 249 return ("???"); 250} 251 252static int 253mca_mute(const struct mca_record *rec) 254{ 255 256 /* 257 * Skip spurious corrected parity errors generated by Intel Haswell- 258 * and Broadwell-based CPUs (see HSD131, HSM142, HSW131 and BDM48 259 * erratum respectively), unless reporting is enabled. 260 * Note that these errors also have been observed with the D0-stepping 261 * of Haswell, while at least initially the CPU specification updates 262 * suggested only the C0-stepping to be affected. Similarly, Celeron 263 * 2955U with a CPU ID of 0x45 apparently are also concerned with the 264 * same problem, with HSM142 only referring to 0x3c and 0x46. 265 */ 266 if (cpu_vendor_id == CPU_VENDOR_INTEL && 267 CPUID_TO_FAMILY(cpu_id) == 0x6 && 268 (CPUID_TO_MODEL(cpu_id) == 0x3c || /* HSD131, HSM142, HSW131 */ 269 CPUID_TO_MODEL(cpu_id) == 0x3d || /* BDM48 */ 270 CPUID_TO_MODEL(cpu_id) == 0x45 || 271 CPUID_TO_MODEL(cpu_id) == 0x46) && /* HSM142 */ 272 rec->mr_bank == 0 && 273 (rec->mr_status & 0xa0000000ffffffff) == 0x80000000000f0005 && 274 !intel6h_HSD131) 275 return (1); 276 277 return (0); 278} 279 280/* Dump details about a single machine check. */ 281static void 282mca_log(const struct mca_record *rec) 283{ 284 uint16_t mca_error; 285 286 if (mca_mute(rec)) 287 return; 288 289 printf("MCA: Bank %d, Status 0x%016llx\n", rec->mr_bank, 290 (long long)rec->mr_status); 291 printf("MCA: Global Cap 0x%016llx, Status 0x%016llx\n", 292 (long long)rec->mr_mcg_cap, (long long)rec->mr_mcg_status); 293 printf("MCA: Vendor \"%s\", ID 0x%x, APIC ID %d\n", cpu_vendor, 294 rec->mr_cpu_id, rec->mr_apic_id); 295 printf("MCA: CPU %d ", rec->mr_cpu); 296 if (rec->mr_status & MC_STATUS_UC) 297 printf("UNCOR "); 298 else { 299 printf("COR "); 300 if (rec->mr_mcg_cap & MCG_CAP_CMCI_P) 301 printf("(%lld) ", ((long long)rec->mr_status & 302 MC_STATUS_COR_COUNT) >> 38); 303 } 304 if (rec->mr_status & MC_STATUS_PCC) 305 printf("PCC "); 306 if (rec->mr_status & MC_STATUS_OVER) 307 printf("OVER "); 308 mca_error = rec->mr_status & MC_STATUS_MCA_ERROR; 309 switch (mca_error) { 310 /* Simple error codes. */ 311 case 0x0000: 312 printf("no error"); 313 break; 314 case 0x0001: 315 printf("unclassified error"); 316 break; 317 case 0x0002: 318 printf("ucode ROM parity error"); 319 break; 320 case 0x0003: 321 printf("external error"); 322 break; 323 case 0x0004: 324 printf("FRC error"); 325 break; 326 case 0x0005: 327 printf("internal parity error"); 328 break; 329 case 0x0400: 330 printf("internal timer error"); 331 break; 332 default: 333 if ((mca_error & 0xfc00) == 0x0400) { 334 printf("internal error %x", mca_error & 0x03ff); 335 break; 336 } 337 338 /* Compound error codes. */ 339 340 /* Memory hierarchy error. */ 341 if ((mca_error & 0xeffc) == 0x000c) { 342 printf("%s memory error", mca_error_level(mca_error)); 343 break; 344 } 345 346 /* TLB error. */ 347 if ((mca_error & 0xeff0) == 0x0010) { 348 printf("%sTLB %s error", mca_error_ttype(mca_error), 349 mca_error_level(mca_error)); 350 break; 351 } 352 353 /* Memory controller error. */ 354 if ((mca_error & 0xef80) == 0x0080) { 355 printf("%s channel ", mca_error_mmtype(mca_error)); 356 if ((mca_error & 0x000f) != 0x000f) 357 printf("%d", mca_error & 0x000f); 358 else 359 printf("??"); 360 printf(" memory error"); 361 break; 362 } 363 364 /* Cache error. */ 365 if ((mca_error & 0xef00) == 0x0100) { 366 printf("%sCACHE %s %s error", 367 mca_error_ttype(mca_error), 368 mca_error_level(mca_error), 369 mca_error_request(mca_error)); 370 break; 371 } 372 373 /* Bus and/or Interconnect error. */ 374 if ((mca_error & 0xe800) == 0x0800) { 375 printf("BUS%s ", mca_error_level(mca_error)); 376 switch ((mca_error & 0x0600) >> 9) { 377 case 0: 378 printf("Source"); 379 break; 380 case 1: 381 printf("Responder"); 382 break; 383 case 2: 384 printf("Observer"); 385 break; 386 default: 387 printf("???"); 388 break; 389 } 390 printf(" %s ", mca_error_request(mca_error)); 391 switch ((mca_error & 0x000c) >> 2) { 392 case 0: 393 printf("Memory"); 394 break; 395 case 2: 396 printf("I/O"); 397 break; 398 case 3: 399 printf("Other"); 400 break; 401 default: 402 printf("???"); 403 break; 404 } 405 if (mca_error & 0x0100) 406 printf(" timed out"); 407 break; 408 } 409 410 printf("unknown error %x", mca_error); 411 break; 412 } 413 printf("\n"); 414 if (rec->mr_status & MC_STATUS_ADDRV) 415 printf("MCA: Address 0x%llx\n", (long long)rec->mr_addr); 416 if (rec->mr_status & MC_STATUS_MISCV) 417 printf("MCA: Misc 0x%llx\n", (long long)rec->mr_misc); 418} 419 420static int 421mca_check_status(int bank, struct mca_record *rec) 422{ 423 uint64_t status; 424 u_int p[4]; 425 426 status = rdmsr(MSR_MC_STATUS(bank)); 427 if (!(status & MC_STATUS_VAL)) 428 return (0); 429 430 /* Save exception information. */ 431 rec->mr_status = status; 432 rec->mr_bank = bank; 433 rec->mr_addr = 0; 434 if (status & MC_STATUS_ADDRV) 435 rec->mr_addr = rdmsr(MSR_MC_ADDR(bank)); 436 rec->mr_misc = 0; 437 if (status & MC_STATUS_MISCV) 438 rec->mr_misc = rdmsr(MSR_MC_MISC(bank)); 439 rec->mr_tsc = rdtsc(); 440 rec->mr_apic_id = PCPU_GET(apic_id); 441 rec->mr_mcg_cap = rdmsr(MSR_MCG_CAP); 442 rec->mr_mcg_status = rdmsr(MSR_MCG_STATUS); 443 rec->mr_cpu_id = cpu_id; 444 rec->mr_cpu_vendor_id = cpu_vendor_id; 445 rec->mr_cpu = PCPU_GET(cpuid); 446 447 /* 448 * Clear machine check. Don't do this for uncorrectable 449 * errors so that the BIOS can see them. 450 */ 451 if (!(rec->mr_status & (MC_STATUS_PCC | MC_STATUS_UC))) { 452 wrmsr(MSR_MC_STATUS(bank), 0); 453 do_cpuid(0, p); 454 } 455 return (1); 456} 457 458static void 459mca_fill_freelist(void) 460{ 461 struct mca_internal *rec; 462 int desired; 463 464 /* 465 * Ensure we have at least one record for each bank and one 466 * record per CPU. 467 */ 468 desired = imax(mp_ncpus, mca_banks); 469 mtx_lock_spin(&mca_lock); 470 while (mca_freecount < desired) { 471 mtx_unlock_spin(&mca_lock); 472 rec = malloc(sizeof(*rec), M_MCA, M_WAITOK); 473 mtx_lock_spin(&mca_lock); 474 STAILQ_INSERT_TAIL(&mca_freelist, rec, link); 475 mca_freecount++; 476 } 477 mtx_unlock_spin(&mca_lock); 478} 479 480static void 481mca_refill(void *context, int pending) 482{ 483 484 mca_fill_freelist(); 485} 486 487static void 488mca_record_entry(enum scan_mode mode, const struct mca_record *record) 489{ 490 struct mca_internal *rec; 491 492 if (mode == POLLED) { 493 rec = malloc(sizeof(*rec), M_MCA, M_WAITOK); 494 mtx_lock_spin(&mca_lock); 495 } else { 496 mtx_lock_spin(&mca_lock); 497 rec = STAILQ_FIRST(&mca_freelist); 498 if (rec == NULL) { 499 printf("MCA: Unable to allocate space for an event.\n"); 500 mca_log(record); 501 mtx_unlock_spin(&mca_lock); 502 return; 503 } 504 STAILQ_REMOVE_HEAD(&mca_freelist, link); 505 mca_freecount--; 506 } 507 508 rec->rec = *record; 509 rec->logged = 0; 510 STAILQ_INSERT_TAIL(&mca_records, rec, link); 511 mca_count++; 512 mtx_unlock_spin(&mca_lock); 513 if (mode == CMCI) 514 taskqueue_enqueue_fast(mca_tq, &mca_refill_task); 515} 516 517#ifdef DEV_APIC 518/* 519 * Update the interrupt threshold for a CMCI. The strategy is to use 520 * a low trigger that interrupts as soon as the first event occurs. 521 * However, if a steady stream of events arrive, the threshold is 522 * increased until the interrupts are throttled to once every 523 * cmc_throttle seconds or the periodic scan. If a periodic scan 524 * finds that the threshold is too high, it is lowered. 525 */ 526static void 527cmci_update(enum scan_mode mode, int bank, int valid, struct mca_record *rec) 528{ 529 struct cmc_state *cc; 530 uint64_t ctl; 531 u_int delta; 532 int count, limit; 533 534 /* Fetch the current limit for this bank. */ 535 cc = &cmc_state[PCPU_GET(cpuid)][bank]; 536 ctl = rdmsr(MSR_MC_CTL2(bank)); 537 count = (rec->mr_status & MC_STATUS_COR_COUNT) >> 38; 538 delta = (u_int)(ticks - cc->last_intr); 539 540 /* 541 * If an interrupt was received less than cmc_throttle seconds 542 * since the previous interrupt and the count from the current 543 * event is greater than or equal to the current threshold, 544 * double the threshold up to the max. 545 */ 546 if (mode == CMCI && valid) { 547 limit = ctl & MC_CTL2_THRESHOLD; 548 if (delta < cmc_throttle && count >= limit && 549 limit < cc->max_threshold) { 550 limit = min(limit << 1, cc->max_threshold); 551 ctl &= ~MC_CTL2_THRESHOLD; 552 ctl |= limit; 553 wrmsr(MSR_MC_CTL2(bank), limit); 554 } 555 cc->last_intr = ticks; 556 return; 557 } 558 559 /* 560 * When the banks are polled, check to see if the threshold 561 * should be lowered. 562 */ 563 if (mode != POLLED) 564 return; 565 566 /* If a CMCI occured recently, do nothing for now. */ 567 if (delta < cmc_throttle) 568 return; 569 570 /* 571 * Compute a new limit based on the average rate of events per 572 * cmc_throttle seconds since the last interrupt. 573 */ 574 if (valid) { 575 count = (rec->mr_status & MC_STATUS_COR_COUNT) >> 38; 576 limit = count * cmc_throttle / delta; 577 if (limit <= 0) 578 limit = 1; 579 else if (limit > cc->max_threshold) 580 limit = cc->max_threshold; 581 } else 582 limit = 1; 583 if ((ctl & MC_CTL2_THRESHOLD) != limit) { 584 ctl &= ~MC_CTL2_THRESHOLD; 585 ctl |= limit; 586 wrmsr(MSR_MC_CTL2(bank), limit); 587 } 588} 589#endif 590 591/* 592 * This scans all the machine check banks of the current CPU to see if 593 * there are any machine checks. Any non-recoverable errors are 594 * reported immediately via mca_log(). The current thread must be 595 * pinned when this is called. The 'mode' parameter indicates if we 596 * are being called from the MC exception handler, the CMCI handler, 597 * or the periodic poller. In the MC exception case this function 598 * returns true if the system is restartable. Otherwise, it returns a 599 * count of the number of valid MC records found. 600 */ 601static int 602mca_scan(enum scan_mode mode) 603{ 604 struct mca_record rec; 605 uint64_t mcg_cap, ucmask; 606 int count, i, recoverable, valid; 607 608 count = 0; 609 recoverable = 1; 610 ucmask = MC_STATUS_UC | MC_STATUS_PCC; 611 612 /* When handling a MCE#, treat the OVER flag as non-restartable. */ 613 if (mode == MCE) 614 ucmask |= MC_STATUS_OVER; 615 mcg_cap = rdmsr(MSR_MCG_CAP); 616 for (i = 0; i < (mcg_cap & MCG_CAP_COUNT); i++) { 617#ifdef DEV_APIC 618 /* 619 * For a CMCI, only check banks this CPU is 620 * responsible for. 621 */ 622 if (mode == CMCI && !(PCPU_GET(cmci_mask) & 1 << i)) 623 continue; 624#endif 625 626 valid = mca_check_status(i, &rec); 627 if (valid) { 628 count++; 629 if (rec.mr_status & ucmask) { 630 recoverable = 0; 631 mtx_lock_spin(&mca_lock); 632 mca_log(&rec); 633 mtx_unlock_spin(&mca_lock); 634 } 635 mca_record_entry(mode, &rec); 636 } 637 638#ifdef DEV_APIC 639 /* 640 * If this is a bank this CPU monitors via CMCI, 641 * update the threshold. 642 */ 643 if (PCPU_GET(cmci_mask) & 1 << i) 644 cmci_update(mode, i, valid, &rec); 645#endif 646 } 647 if (mode == POLLED) 648 mca_fill_freelist(); 649 return (mode == MCE ? recoverable : count); 650} 651 652/* 653 * Scan the machine check banks on all CPUs by binding to each CPU in 654 * turn. If any of the CPUs contained new machine check records, log 655 * them to the console. 656 */ 657static void 658mca_scan_cpus(void *context, int pending) 659{ 660 struct mca_internal *mca; 661 struct thread *td; 662 int count, cpu; 663 664 mca_fill_freelist(); 665 td = curthread; 666 count = 0; 667 thread_lock(td); 668 CPU_FOREACH(cpu) { 669 sched_bind(td, cpu); 670 thread_unlock(td); 671 count += mca_scan(POLLED); 672 thread_lock(td); 673 sched_unbind(td); 674 } 675 thread_unlock(td); 676 if (count != 0) { 677 mtx_lock_spin(&mca_lock); 678 STAILQ_FOREACH(mca, &mca_records, link) { 679 if (!mca->logged) { 680 mca->logged = 1; 681 mca_log(&mca->rec); 682 } 683 } 684 mtx_unlock_spin(&mca_lock); 685 } 686} 687 688static void 689mca_periodic_scan(void *arg) 690{ 691 692 taskqueue_enqueue_fast(mca_tq, &mca_scan_task); 693 callout_reset(&mca_timer, mca_ticks * hz, mca_periodic_scan, NULL); 694} 695 696static int 697sysctl_mca_scan(SYSCTL_HANDLER_ARGS) 698{ 699 int error, i; 700 701 i = 0; 702 error = sysctl_handle_int(oidp, &i, 0, req); 703 if (error) 704 return (error); 705 if (i) 706 taskqueue_enqueue_fast(mca_tq, &mca_scan_task); 707 return (0); 708} 709 710static void 711mca_createtq(void *dummy) 712{ 713 if (mca_banks <= 0) 714 return; 715 716 mca_tq = taskqueue_create_fast("mca", M_WAITOK, 717 taskqueue_thread_enqueue, &mca_tq); 718 taskqueue_start_threads(&mca_tq, 1, PI_SWI(SWI_TQ), "mca taskq"); 719} 720SYSINIT(mca_createtq, SI_SUB_CONFIGURE, SI_ORDER_ANY, mca_createtq, NULL); 721 722static void 723mca_startup(void *dummy) 724{ 725 726 if (mca_banks <= 0) 727 return; 728 729 callout_reset(&mca_timer, mca_ticks * hz, mca_periodic_scan, NULL); 730} 731SYSINIT(mca_startup, SI_SUB_SMP, SI_ORDER_ANY, mca_startup, NULL); 732 733#ifdef DEV_APIC 734static void 735cmci_setup(void) 736{ 737 int i; 738 739 cmc_state = malloc((mp_maxid + 1) * sizeof(struct cmc_state *), M_MCA, 740 M_WAITOK); 741 for (i = 0; i <= mp_maxid; i++) 742 cmc_state[i] = malloc(sizeof(struct cmc_state) * mca_banks, 743 M_MCA, M_WAITOK | M_ZERO); 744 SYSCTL_ADD_PROC(NULL, SYSCTL_STATIC_CHILDREN(_hw_mca), OID_AUTO, 745 "cmc_throttle", CTLTYPE_INT | CTLFLAG_RW | CTLFLAG_MPSAFE, 746 &cmc_throttle, 0, sysctl_positive_int, "I", 747 "Interval in seconds to throttle corrected MC interrupts"); 748} 749#endif 750 751static void 752mca_setup(uint64_t mcg_cap) 753{ 754 755 /* 756 * On AMD Family 10h processors, unless logging of level one TLB 757 * parity (L1TP) errors is disabled, enable the recommended workaround 758 * for Erratum 383. 759 */ 760 if (cpu_vendor_id == CPU_VENDOR_AMD && 761 CPUID_TO_FAMILY(cpu_id) == 0x10 && amd10h_L1TP) 762 workaround_erratum383 = 1; 763 764 mca_banks = mcg_cap & MCG_CAP_COUNT; 765 mtx_init(&mca_lock, "mca", NULL, MTX_SPIN); 766 STAILQ_INIT(&mca_records); 767 TASK_INIT(&mca_scan_task, 0, mca_scan_cpus, NULL); 768 callout_init(&mca_timer, CALLOUT_MPSAFE); 769 STAILQ_INIT(&mca_freelist); 770 TASK_INIT(&mca_refill_task, 0, mca_refill, NULL); 771 mca_fill_freelist(); 772 SYSCTL_ADD_INT(NULL, SYSCTL_STATIC_CHILDREN(_hw_mca), OID_AUTO, 773 "count", CTLFLAG_RD, (int *)(uintptr_t)&mca_count, 0, 774 "Record count"); 775 SYSCTL_ADD_PROC(NULL, SYSCTL_STATIC_CHILDREN(_hw_mca), OID_AUTO, 776 "interval", CTLTYPE_INT | CTLFLAG_RW | CTLFLAG_MPSAFE, &mca_ticks, 777 0, sysctl_positive_int, "I", 778 "Periodic interval in seconds to scan for machine checks"); 779 SYSCTL_ADD_NODE(NULL, SYSCTL_STATIC_CHILDREN(_hw_mca), OID_AUTO, 780 "records", CTLFLAG_RD, sysctl_mca_records, "Machine check records"); 781 SYSCTL_ADD_PROC(NULL, SYSCTL_STATIC_CHILDREN(_hw_mca), OID_AUTO, 782 "force_scan", CTLTYPE_INT | CTLFLAG_RW | CTLFLAG_MPSAFE, NULL, 0, 783 sysctl_mca_scan, "I", "Force an immediate scan for machine checks"); 784#ifdef DEV_APIC 785 if (mcg_cap & MCG_CAP_CMCI_P) 786 cmci_setup(); 787#endif 788} 789 790#ifdef DEV_APIC 791/* 792 * See if we should monitor CMCI for this bank. If CMCI_EN is already 793 * set in MC_CTL2, then another CPU is responsible for this bank, so 794 * ignore it. If CMCI_EN returns zero after being set, then this bank 795 * does not support CMCI_EN. If this CPU sets CMCI_EN, then it should 796 * now monitor this bank. 797 */ 798static void 799cmci_monitor(int i) 800{ 801 struct cmc_state *cc; 802 uint64_t ctl; 803 804 KASSERT(i < mca_banks, ("CPU %d has more MC banks", PCPU_GET(cpuid))); 805 806 ctl = rdmsr(MSR_MC_CTL2(i)); 807 if (ctl & MC_CTL2_CMCI_EN) 808 /* Already monitored by another CPU. */ 809 return; 810 811 /* Set the threshold to one event for now. */ 812 ctl &= ~MC_CTL2_THRESHOLD; 813 ctl |= MC_CTL2_CMCI_EN | 1; 814 wrmsr(MSR_MC_CTL2(i), ctl); 815 ctl = rdmsr(MSR_MC_CTL2(i)); 816 if (!(ctl & MC_CTL2_CMCI_EN)) 817 /* This bank does not support CMCI. */ 818 return; 819 820 cc = &cmc_state[PCPU_GET(cpuid)][i]; 821 822 /* Determine maximum threshold. */ 823 ctl &= ~MC_CTL2_THRESHOLD; 824 ctl |= 0x7fff; 825 wrmsr(MSR_MC_CTL2(i), ctl); 826 ctl = rdmsr(MSR_MC_CTL2(i)); 827 cc->max_threshold = ctl & MC_CTL2_THRESHOLD; 828 829 /* Start off with a threshold of 1. */ 830 ctl &= ~MC_CTL2_THRESHOLD; 831 ctl |= 1; 832 wrmsr(MSR_MC_CTL2(i), ctl); 833 834 /* Mark this bank as monitored. */ 835 PCPU_SET(cmci_mask, PCPU_GET(cmci_mask) | 1 << i); 836} 837 838/* 839 * For resume, reset the threshold for any banks we monitor back to 840 * one and throw away the timestamp of the last interrupt. 841 */ 842static void 843cmci_resume(int i) 844{ 845 struct cmc_state *cc; 846 uint64_t ctl; 847 848 KASSERT(i < mca_banks, ("CPU %d has more MC banks", PCPU_GET(cpuid))); 849 850 /* Ignore banks not monitored by this CPU. */ 851 if (!(PCPU_GET(cmci_mask) & 1 << i)) 852 return; 853 854 cc = &cmc_state[PCPU_GET(cpuid)][i]; 855 cc->last_intr = -ticks; 856 ctl = rdmsr(MSR_MC_CTL2(i)); 857 ctl &= ~MC_CTL2_THRESHOLD; 858 ctl |= MC_CTL2_CMCI_EN | 1; 859 wrmsr(MSR_MC_CTL2(i), ctl); 860} 861#endif 862 863/* 864 * Initializes per-CPU machine check registers and enables corrected 865 * machine check interrupts. 866 */ 867static void 868_mca_init(int boot) 869{ 870 uint64_t mcg_cap; 871 uint64_t ctl, mask; 872 int i, skip; 873 874 /* MCE is required. */ 875 if (!mca_enabled || !(cpu_feature & CPUID_MCE)) 876 return; 877 878 if (cpu_feature & CPUID_MCA) { 879 if (boot) 880 PCPU_SET(cmci_mask, 0); 881 882 mcg_cap = rdmsr(MSR_MCG_CAP); 883 if (mcg_cap & MCG_CAP_CTL_P) 884 /* Enable MCA features. */ 885 wrmsr(MSR_MCG_CTL, MCG_CTL_ENABLE); 886 if (PCPU_GET(cpuid) == 0 && boot) 887 mca_setup(mcg_cap); 888 889 /* 890 * Disable logging of level one TLB parity (L1TP) errors by 891 * the data cache as an alternative workaround for AMD Family 892 * 10h Erratum 383. Unlike the recommended workaround, there 893 * is no performance penalty to this workaround. However, 894 * L1TP errors will go unreported. 895 */ 896 if (cpu_vendor_id == CPU_VENDOR_AMD && 897 CPUID_TO_FAMILY(cpu_id) == 0x10 && !amd10h_L1TP) { 898 mask = rdmsr(MSR_MC0_CTL_MASK); 899 if ((mask & (1UL << 5)) == 0) 900 wrmsr(MSR_MC0_CTL_MASK, mask | (1UL << 5)); 901 } 902 for (i = 0; i < (mcg_cap & MCG_CAP_COUNT); i++) { 903 /* By default enable logging of all errors. */ 904 ctl = 0xffffffffffffffffUL; 905 skip = 0; 906 907 if (cpu_vendor_id == CPU_VENDOR_INTEL) { 908 /* 909 * For P6 models before Nehalem MC0_CTL is 910 * always enabled and reserved. 911 */ 912 if (i == 0 && CPUID_TO_FAMILY(cpu_id) == 0x6 913 && CPUID_TO_MODEL(cpu_id) < 0x1a) 914 skip = 1; 915 } else if (cpu_vendor_id == CPU_VENDOR_AMD) { 916 /* BKDG for Family 10h: unset GartTblWkEn. */ 917 if (i == 4 && CPUID_TO_FAMILY(cpu_id) >= 0xf) 918 ctl &= ~(1UL << 10); 919 } 920 921 if (!skip) 922 wrmsr(MSR_MC_CTL(i), ctl); 923 924#ifdef DEV_APIC 925 if (mcg_cap & MCG_CAP_CMCI_P) { 926 if (boot) 927 cmci_monitor(i); 928 else 929 cmci_resume(i); 930 } 931#endif 932 933 /* Clear all errors. */ 934 wrmsr(MSR_MC_STATUS(i), 0); 935 } 936 937#ifdef DEV_APIC 938 if (PCPU_GET(cmci_mask) != 0 && boot) 939 lapic_enable_cmc(); 940#endif 941 } 942 943 load_cr4(rcr4() | CR4_MCE); 944} 945 946/* Must be executed on each CPU during boot. */ 947void 948mca_init(void) 949{ 950 951 _mca_init(1); 952} 953 954/* Must be executed on each CPU during resume. */ 955void 956mca_resume(void) 957{ 958 959 _mca_init(0); 960} 961 962/* 963 * The machine check registers for the BSP cannot be initialized until 964 * the local APIC is initialized. This happens at SI_SUB_CPU, 965 * SI_ORDER_SECOND. 966 */ 967static void 968mca_init_bsp(void *arg __unused) 969{ 970 971 mca_init(); 972} 973SYSINIT(mca_init_bsp, SI_SUB_CPU, SI_ORDER_ANY, mca_init_bsp, NULL); 974 975/* Called when a machine check exception fires. */ 976void 977mca_intr(void) 978{ 979 uint64_t mcg_status; 980 int old_count, recoverable; 981 982 if (!(cpu_feature & CPUID_MCA)) { 983 /* 984 * Just print the values of the old Pentium registers 985 * and panic. 986 */ 987 printf("MC Type: 0x%jx Address: 0x%jx\n", 988 (uintmax_t)rdmsr(MSR_P5_MC_TYPE), 989 (uintmax_t)rdmsr(MSR_P5_MC_ADDR)); 990 panic("Machine check"); 991 } 992 993 /* Scan the banks and check for any non-recoverable errors. */ 994 old_count = mca_count; 995 recoverable = mca_scan(MCE); 996 mcg_status = rdmsr(MSR_MCG_STATUS); 997 if (!(mcg_status & MCG_STATUS_RIPV)) 998 recoverable = 0; 999 1000 if (!recoverable) { 1001 /* 1002 * Wait for at least one error to be logged before 1003 * panic'ing. Some errors will assert a machine check 1004 * on all CPUs, but only certain CPUs will find a valid 1005 * bank to log. 1006 */ 1007 while (mca_count == old_count) 1008 cpu_spinwait(); 1009 1010 panic("Unrecoverable machine check exception"); 1011 } 1012 1013 /* Clear MCIP. */ 1014 wrmsr(MSR_MCG_STATUS, mcg_status & ~MCG_STATUS_MCIP); 1015} 1016 1017#ifdef DEV_APIC 1018/* Called for a CMCI (correctable machine check interrupt). */ 1019void 1020cmc_intr(void) 1021{ 1022 struct mca_internal *mca; 1023 int count; 1024 1025 /* 1026 * Serialize MCA bank scanning to prevent collisions from 1027 * sibling threads. 1028 */ 1029 count = mca_scan(CMCI); 1030 1031 /* If we found anything, log them to the console. */ 1032 if (count != 0) { 1033 mtx_lock_spin(&mca_lock); 1034 STAILQ_FOREACH(mca, &mca_records, link) { 1035 if (!mca->logged) { 1036 mca->logged = 1; 1037 mca_log(&mca->rec); 1038 } 1039 } 1040 mtx_unlock_spin(&mca_lock); 1041 } 1042} 1043#endif 1044