identcpu.c revision 299062
1/*- 2 * Copyright (c) 1992 Terrence R. Lambert. 3 * Copyright (c) 1982, 1987, 1990 The Regents of the University of California. 4 * Copyright (c) 1997 KATO Takenori. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to Berkeley by 8 * William Jolitz. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 3. All advertising materials mentioning features or use of this software 19 * must display the following acknowledgement: 20 * This product includes software developed by the University of 21 * California, Berkeley and its contributors. 22 * 4. Neither the name of the University nor the names of its contributors 23 * may be used to endorse or promote products derived from this software 24 * without specific prior written permission. 25 * 26 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 27 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 28 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 29 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 30 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 31 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 32 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 33 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 34 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 35 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 36 * SUCH DAMAGE. 37 * 38 * from: Id: machdep.c,v 1.193 1996/06/18 01:22:04 bde Exp 39 */ 40 41#include <sys/cdefs.h> 42__FBSDID("$FreeBSD: stable/10/sys/x86/x86/identcpu.c 299062 2016-05-04 11:53:30Z avg $"); 43 44#include "opt_cpu.h" 45 46#include <sys/param.h> 47#include <sys/bus.h> 48#include <sys/cpu.h> 49#include <sys/eventhandler.h> 50#include <sys/limits.h> 51#include <sys/systm.h> 52#include <sys/kernel.h> 53#include <sys/sysctl.h> 54#include <sys/power.h> 55 56#include <machine/asmacros.h> 57#include <machine/clock.h> 58#include <machine/cputypes.h> 59#include <machine/frame.h> 60#include <machine/intr_machdep.h> 61#include <machine/md_var.h> 62#include <machine/segments.h> 63#include <machine/specialreg.h> 64 65#include <amd64/vmm/intel/vmx_controls.h> 66#include <x86/isa/icu.h> 67#include <x86/vmware.h> 68 69#ifdef __i386__ 70#define IDENTBLUE_CYRIX486 0 71#define IDENTBLUE_IBMCPU 1 72#define IDENTBLUE_CYRIXM2 2 73 74static void identifycyrix(void); 75static void print_transmeta_info(void); 76#endif 77static u_int find_cpu_vendor_id(void); 78static void print_AMD_info(void); 79static void print_INTEL_info(void); 80static void print_INTEL_TLB(u_int data); 81static void print_hypervisor_info(void); 82static void print_svm_info(void); 83static void print_via_padlock_info(void); 84static void print_vmx_info(void); 85 86int cpu_class; 87char machine[] = MACHINE; 88 89#ifdef __amd64__ 90#ifdef SCTL_MASK32 91extern int adaptive_machine_arch; 92#endif 93 94static int 95sysctl_hw_machine(SYSCTL_HANDLER_ARGS) 96{ 97#ifdef SCTL_MASK32 98 static const char machine32[] = "i386"; 99#endif 100 int error; 101 102#ifdef SCTL_MASK32 103 if ((req->flags & SCTL_MASK32) != 0 && adaptive_machine_arch) 104 error = SYSCTL_OUT(req, machine32, sizeof(machine32)); 105 else 106#endif 107 error = SYSCTL_OUT(req, machine, sizeof(machine)); 108 return (error); 109 110} 111SYSCTL_PROC(_hw, HW_MACHINE, machine, CTLTYPE_STRING | CTLFLAG_RD, 112 NULL, 0, sysctl_hw_machine, "A", "Machine class"); 113#else 114SYSCTL_STRING(_hw, HW_MACHINE, machine, CTLFLAG_RD, 115 machine, 0, "Machine class"); 116#endif 117 118static char cpu_model[128]; 119SYSCTL_STRING(_hw, HW_MODEL, model, CTLFLAG_RD, 120 cpu_model, 0, "Machine model"); 121 122static int hw_clockrate; 123SYSCTL_INT(_hw, OID_AUTO, clockrate, CTLFLAG_RD, 124 &hw_clockrate, 0, "CPU instruction clock rate"); 125 126u_int hv_high; 127char hv_vendor[16]; 128SYSCTL_STRING(_hw, OID_AUTO, hv_vendor, CTLFLAG_RD, hv_vendor, 0, 129 "Hypervisor vendor"); 130 131static eventhandler_tag tsc_post_tag; 132 133static char cpu_brand[48]; 134 135#ifdef __i386__ 136#define MAX_BRAND_INDEX 8 137 138static const char *cpu_brandtable[MAX_BRAND_INDEX + 1] = { 139 NULL, /* No brand */ 140 "Intel Celeron", 141 "Intel Pentium III", 142 "Intel Pentium III Xeon", 143 NULL, 144 NULL, 145 NULL, 146 NULL, 147 "Intel Pentium 4" 148}; 149#endif 150 151static struct { 152 char *cpu_name; 153 int cpu_class; 154} cpus[] = { 155#ifdef __i386__ 156 { "Intel 80286", CPUCLASS_286 }, /* CPU_286 */ 157 { "i386SX", CPUCLASS_386 }, /* CPU_386SX */ 158 { "i386DX", CPUCLASS_386 }, /* CPU_386 */ 159 { "i486SX", CPUCLASS_486 }, /* CPU_486SX */ 160 { "i486DX", CPUCLASS_486 }, /* CPU_486 */ 161 { "Pentium", CPUCLASS_586 }, /* CPU_586 */ 162 { "Cyrix 486", CPUCLASS_486 }, /* CPU_486DLC */ 163 { "Pentium Pro", CPUCLASS_686 }, /* CPU_686 */ 164 { "Cyrix 5x86", CPUCLASS_486 }, /* CPU_M1SC */ 165 { "Cyrix 6x86", CPUCLASS_486 }, /* CPU_M1 */ 166 { "Blue Lightning", CPUCLASS_486 }, /* CPU_BLUE */ 167 { "Cyrix 6x86MX", CPUCLASS_686 }, /* CPU_M2 */ 168 { "NexGen 586", CPUCLASS_386 }, /* CPU_NX586 (XXX) */ 169 { "Cyrix 486S/DX", CPUCLASS_486 }, /* CPU_CY486DX */ 170 { "Pentium II", CPUCLASS_686 }, /* CPU_PII */ 171 { "Pentium III", CPUCLASS_686 }, /* CPU_PIII */ 172 { "Pentium 4", CPUCLASS_686 }, /* CPU_P4 */ 173#else 174 { "Clawhammer", CPUCLASS_K8 }, /* CPU_CLAWHAMMER */ 175 { "Sledgehammer", CPUCLASS_K8 }, /* CPU_SLEDGEHAMMER */ 176#endif 177}; 178 179static struct { 180 char *vendor; 181 u_int vendor_id; 182} cpu_vendors[] = { 183 { INTEL_VENDOR_ID, CPU_VENDOR_INTEL }, /* GenuineIntel */ 184 { AMD_VENDOR_ID, CPU_VENDOR_AMD }, /* AuthenticAMD */ 185 { CENTAUR_VENDOR_ID, CPU_VENDOR_CENTAUR }, /* CentaurHauls */ 186#ifdef __i386__ 187 { NSC_VENDOR_ID, CPU_VENDOR_NSC }, /* Geode by NSC */ 188 { CYRIX_VENDOR_ID, CPU_VENDOR_CYRIX }, /* CyrixInstead */ 189 { TRANSMETA_VENDOR_ID, CPU_VENDOR_TRANSMETA }, /* GenuineTMx86 */ 190 { SIS_VENDOR_ID, CPU_VENDOR_SIS }, /* SiS SiS SiS */ 191 { UMC_VENDOR_ID, CPU_VENDOR_UMC }, /* UMC UMC UMC */ 192 { NEXGEN_VENDOR_ID, CPU_VENDOR_NEXGEN }, /* NexGenDriven */ 193 { RISE_VENDOR_ID, CPU_VENDOR_RISE }, /* RiseRiseRise */ 194#if 0 195 /* XXX CPUID 8000_0000h and 8086_0000h, not 0000_0000h */ 196 { "TransmetaCPU", CPU_VENDOR_TRANSMETA }, 197#endif 198#endif 199}; 200 201void 202printcpuinfo(void) 203{ 204 u_int regs[4], i; 205 char *brand; 206 207 cpu_class = cpus[cpu].cpu_class; 208 printf("CPU: "); 209 strncpy(cpu_model, cpus[cpu].cpu_name, sizeof (cpu_model)); 210 211 /* Check for extended CPUID information and a processor name. */ 212 if (cpu_exthigh >= 0x80000004) { 213 brand = cpu_brand; 214 for (i = 0x80000002; i < 0x80000005; i++) { 215 do_cpuid(i, regs); 216 memcpy(brand, regs, sizeof(regs)); 217 brand += sizeof(regs); 218 } 219 } 220 221 switch (cpu_vendor_id) { 222 case CPU_VENDOR_INTEL: 223#ifdef __i386__ 224 if ((cpu_id & 0xf00) > 0x300) { 225 u_int brand_index; 226 227 cpu_model[0] = '\0'; 228 229 switch (cpu_id & 0x3000) { 230 case 0x1000: 231 strcpy(cpu_model, "Overdrive "); 232 break; 233 case 0x2000: 234 strcpy(cpu_model, "Dual "); 235 break; 236 } 237 238 switch (cpu_id & 0xf00) { 239 case 0x400: 240 strcat(cpu_model, "i486 "); 241 /* Check the particular flavor of 486 */ 242 switch (cpu_id & 0xf0) { 243 case 0x00: 244 case 0x10: 245 strcat(cpu_model, "DX"); 246 break; 247 case 0x20: 248 strcat(cpu_model, "SX"); 249 break; 250 case 0x30: 251 strcat(cpu_model, "DX2"); 252 break; 253 case 0x40: 254 strcat(cpu_model, "SL"); 255 break; 256 case 0x50: 257 strcat(cpu_model, "SX2"); 258 break; 259 case 0x70: 260 strcat(cpu_model, 261 "DX2 Write-Back Enhanced"); 262 break; 263 case 0x80: 264 strcat(cpu_model, "DX4"); 265 break; 266 } 267 break; 268 case 0x500: 269 /* Check the particular flavor of 586 */ 270 strcat(cpu_model, "Pentium"); 271 switch (cpu_id & 0xf0) { 272 case 0x00: 273 strcat(cpu_model, " A-step"); 274 break; 275 case 0x10: 276 strcat(cpu_model, "/P5"); 277 break; 278 case 0x20: 279 strcat(cpu_model, "/P54C"); 280 break; 281 case 0x30: 282 strcat(cpu_model, "/P24T"); 283 break; 284 case 0x40: 285 strcat(cpu_model, "/P55C"); 286 break; 287 case 0x70: 288 strcat(cpu_model, "/P54C"); 289 break; 290 case 0x80: 291 strcat(cpu_model, "/P55C (quarter-micron)"); 292 break; 293 default: 294 /* nothing */ 295 break; 296 } 297#if defined(I586_CPU) && !defined(NO_F00F_HACK) 298 /* 299 * XXX - If/when Intel fixes the bug, this 300 * should also check the version of the 301 * CPU, not just that it's a Pentium. 302 */ 303 has_f00f_bug = 1; 304#endif 305 break; 306 case 0x600: 307 /* Check the particular flavor of 686 */ 308 switch (cpu_id & 0xf0) { 309 case 0x00: 310 strcat(cpu_model, "Pentium Pro A-step"); 311 break; 312 case 0x10: 313 strcat(cpu_model, "Pentium Pro"); 314 break; 315 case 0x30: 316 case 0x50: 317 case 0x60: 318 strcat(cpu_model, 319 "Pentium II/Pentium II Xeon/Celeron"); 320 cpu = CPU_PII; 321 break; 322 case 0x70: 323 case 0x80: 324 case 0xa0: 325 case 0xb0: 326 strcat(cpu_model, 327 "Pentium III/Pentium III Xeon/Celeron"); 328 cpu = CPU_PIII; 329 break; 330 default: 331 strcat(cpu_model, "Unknown 80686"); 332 break; 333 } 334 break; 335 case 0xf00: 336 strcat(cpu_model, "Pentium 4"); 337 cpu = CPU_P4; 338 break; 339 default: 340 strcat(cpu_model, "unknown"); 341 break; 342 } 343 344 /* 345 * If we didn't get a brand name from the extended 346 * CPUID, try to look it up in the brand table. 347 */ 348 if (cpu_high > 0 && *cpu_brand == '\0') { 349 brand_index = cpu_procinfo & CPUID_BRAND_INDEX; 350 if (brand_index <= MAX_BRAND_INDEX && 351 cpu_brandtable[brand_index] != NULL) 352 strcpy(cpu_brand, 353 cpu_brandtable[brand_index]); 354 } 355 } 356#else 357 /* Please make up your mind folks! */ 358 strcat(cpu_model, "EM64T"); 359#endif 360 break; 361 case CPU_VENDOR_AMD: 362 /* 363 * Values taken from AMD Processor Recognition 364 * http://www.amd.com/K6/k6docs/pdf/20734g.pdf 365 * (also describes ``Features'' encodings. 366 */ 367 strcpy(cpu_model, "AMD "); 368#ifdef __i386__ 369 switch (cpu_id & 0xFF0) { 370 case 0x410: 371 strcat(cpu_model, "Standard Am486DX"); 372 break; 373 case 0x430: 374 strcat(cpu_model, "Enhanced Am486DX2 Write-Through"); 375 break; 376 case 0x470: 377 strcat(cpu_model, "Enhanced Am486DX2 Write-Back"); 378 break; 379 case 0x480: 380 strcat(cpu_model, "Enhanced Am486DX4/Am5x86 Write-Through"); 381 break; 382 case 0x490: 383 strcat(cpu_model, "Enhanced Am486DX4/Am5x86 Write-Back"); 384 break; 385 case 0x4E0: 386 strcat(cpu_model, "Am5x86 Write-Through"); 387 break; 388 case 0x4F0: 389 strcat(cpu_model, "Am5x86 Write-Back"); 390 break; 391 case 0x500: 392 strcat(cpu_model, "K5 model 0"); 393 break; 394 case 0x510: 395 strcat(cpu_model, "K5 model 1"); 396 break; 397 case 0x520: 398 strcat(cpu_model, "K5 PR166 (model 2)"); 399 break; 400 case 0x530: 401 strcat(cpu_model, "K5 PR200 (model 3)"); 402 break; 403 case 0x560: 404 strcat(cpu_model, "K6"); 405 break; 406 case 0x570: 407 strcat(cpu_model, "K6 266 (model 1)"); 408 break; 409 case 0x580: 410 strcat(cpu_model, "K6-2"); 411 break; 412 case 0x590: 413 strcat(cpu_model, "K6-III"); 414 break; 415 case 0x5a0: 416 strcat(cpu_model, "Geode LX"); 417 break; 418 default: 419 strcat(cpu_model, "Unknown"); 420 break; 421 } 422#else 423 if ((cpu_id & 0xf00) == 0xf00) 424 strcat(cpu_model, "AMD64 Processor"); 425 else 426 strcat(cpu_model, "Unknown"); 427#endif 428 break; 429#ifdef __i386__ 430 case CPU_VENDOR_CYRIX: 431 strcpy(cpu_model, "Cyrix "); 432 switch (cpu_id & 0xff0) { 433 case 0x440: 434 strcat(cpu_model, "MediaGX"); 435 break; 436 case 0x520: 437 strcat(cpu_model, "6x86"); 438 break; 439 case 0x540: 440 cpu_class = CPUCLASS_586; 441 strcat(cpu_model, "GXm"); 442 break; 443 case 0x600: 444 strcat(cpu_model, "6x86MX"); 445 break; 446 default: 447 /* 448 * Even though CPU supports the cpuid 449 * instruction, it can be disabled. 450 * Therefore, this routine supports all Cyrix 451 * CPUs. 452 */ 453 switch (cyrix_did & 0xf0) { 454 case 0x00: 455 switch (cyrix_did & 0x0f) { 456 case 0x00: 457 strcat(cpu_model, "486SLC"); 458 break; 459 case 0x01: 460 strcat(cpu_model, "486DLC"); 461 break; 462 case 0x02: 463 strcat(cpu_model, "486SLC2"); 464 break; 465 case 0x03: 466 strcat(cpu_model, "486DLC2"); 467 break; 468 case 0x04: 469 strcat(cpu_model, "486SRx"); 470 break; 471 case 0x05: 472 strcat(cpu_model, "486DRx"); 473 break; 474 case 0x06: 475 strcat(cpu_model, "486SRx2"); 476 break; 477 case 0x07: 478 strcat(cpu_model, "486DRx2"); 479 break; 480 case 0x08: 481 strcat(cpu_model, "486SRu"); 482 break; 483 case 0x09: 484 strcat(cpu_model, "486DRu"); 485 break; 486 case 0x0a: 487 strcat(cpu_model, "486SRu2"); 488 break; 489 case 0x0b: 490 strcat(cpu_model, "486DRu2"); 491 break; 492 default: 493 strcat(cpu_model, "Unknown"); 494 break; 495 } 496 break; 497 case 0x10: 498 switch (cyrix_did & 0x0f) { 499 case 0x00: 500 strcat(cpu_model, "486S"); 501 break; 502 case 0x01: 503 strcat(cpu_model, "486S2"); 504 break; 505 case 0x02: 506 strcat(cpu_model, "486Se"); 507 break; 508 case 0x03: 509 strcat(cpu_model, "486S2e"); 510 break; 511 case 0x0a: 512 strcat(cpu_model, "486DX"); 513 break; 514 case 0x0b: 515 strcat(cpu_model, "486DX2"); 516 break; 517 case 0x0f: 518 strcat(cpu_model, "486DX4"); 519 break; 520 default: 521 strcat(cpu_model, "Unknown"); 522 break; 523 } 524 break; 525 case 0x20: 526 if ((cyrix_did & 0x0f) < 8) 527 strcat(cpu_model, "6x86"); /* Where did you get it? */ 528 else 529 strcat(cpu_model, "5x86"); 530 break; 531 case 0x30: 532 strcat(cpu_model, "6x86"); 533 break; 534 case 0x40: 535 if ((cyrix_did & 0xf000) == 0x3000) { 536 cpu_class = CPUCLASS_586; 537 strcat(cpu_model, "GXm"); 538 } else 539 strcat(cpu_model, "MediaGX"); 540 break; 541 case 0x50: 542 strcat(cpu_model, "6x86MX"); 543 break; 544 case 0xf0: 545 switch (cyrix_did & 0x0f) { 546 case 0x0d: 547 strcat(cpu_model, "Overdrive CPU"); 548 break; 549 case 0x0e: 550 strcpy(cpu_model, "Texas Instruments 486SXL"); 551 break; 552 case 0x0f: 553 strcat(cpu_model, "486SLC/DLC"); 554 break; 555 default: 556 strcat(cpu_model, "Unknown"); 557 break; 558 } 559 break; 560 default: 561 strcat(cpu_model, "Unknown"); 562 break; 563 } 564 break; 565 } 566 break; 567 case CPU_VENDOR_RISE: 568 strcpy(cpu_model, "Rise "); 569 switch (cpu_id & 0xff0) { 570 case 0x500: /* 6401 and 6441 (Kirin) */ 571 case 0x520: /* 6510 (Lynx) */ 572 strcat(cpu_model, "mP6"); 573 break; 574 default: 575 strcat(cpu_model, "Unknown"); 576 } 577 break; 578#endif 579 case CPU_VENDOR_CENTAUR: 580#ifdef __i386__ 581 switch (cpu_id & 0xff0) { 582 case 0x540: 583 strcpy(cpu_model, "IDT WinChip C6"); 584 break; 585 case 0x580: 586 strcpy(cpu_model, "IDT WinChip 2"); 587 break; 588 case 0x590: 589 strcpy(cpu_model, "IDT WinChip 3"); 590 break; 591 case 0x660: 592 strcpy(cpu_model, "VIA C3 Samuel"); 593 break; 594 case 0x670: 595 if (cpu_id & 0x8) 596 strcpy(cpu_model, "VIA C3 Ezra"); 597 else 598 strcpy(cpu_model, "VIA C3 Samuel 2"); 599 break; 600 case 0x680: 601 strcpy(cpu_model, "VIA C3 Ezra-T"); 602 break; 603 case 0x690: 604 strcpy(cpu_model, "VIA C3 Nehemiah"); 605 break; 606 case 0x6a0: 607 case 0x6d0: 608 strcpy(cpu_model, "VIA C7 Esther"); 609 break; 610 case 0x6f0: 611 strcpy(cpu_model, "VIA Nano"); 612 break; 613 default: 614 strcpy(cpu_model, "VIA/IDT Unknown"); 615 } 616#else 617 strcpy(cpu_model, "VIA "); 618 if ((cpu_id & 0xff0) == 0x6f0) 619 strcat(cpu_model, "Nano Processor"); 620 else 621 strcat(cpu_model, "Unknown"); 622#endif 623 break; 624#ifdef __i386__ 625 case CPU_VENDOR_IBM: 626 strcpy(cpu_model, "Blue Lightning CPU"); 627 break; 628 case CPU_VENDOR_NSC: 629 switch (cpu_id & 0xff0) { 630 case 0x540: 631 strcpy(cpu_model, "Geode SC1100"); 632 cpu = CPU_GEODE1100; 633 break; 634 default: 635 strcpy(cpu_model, "Geode/NSC unknown"); 636 break; 637 } 638 break; 639#endif 640 default: 641 strcat(cpu_model, "Unknown"); 642 break; 643 } 644 645 /* 646 * Replace cpu_model with cpu_brand minus leading spaces if 647 * we have one. 648 */ 649 brand = cpu_brand; 650 while (*brand == ' ') 651 ++brand; 652 if (*brand != '\0') 653 strcpy(cpu_model, brand); 654 655 printf("%s (", cpu_model); 656 if (tsc_freq != 0) { 657 hw_clockrate = (tsc_freq + 5000) / 1000000; 658 printf("%jd.%02d-MHz ", 659 (intmax_t)(tsc_freq + 4999) / 1000000, 660 (u_int)((tsc_freq + 4999) / 10000) % 100); 661 } 662 switch(cpu_class) { 663#ifdef __i386__ 664 case CPUCLASS_286: 665 printf("286"); 666 break; 667 case CPUCLASS_386: 668 printf("386"); 669 break; 670#if defined(I486_CPU) 671 case CPUCLASS_486: 672 printf("486"); 673 break; 674#endif 675#if defined(I586_CPU) 676 case CPUCLASS_586: 677 printf("586"); 678 break; 679#endif 680#if defined(I686_CPU) 681 case CPUCLASS_686: 682 printf("686"); 683 break; 684#endif 685#else 686 case CPUCLASS_K8: 687 printf("K8"); 688 break; 689#endif 690 default: 691 printf("Unknown"); /* will panic below... */ 692 } 693 printf("-class CPU)\n"); 694 if (*cpu_vendor) 695 printf(" Origin=\"%s\"", cpu_vendor); 696 if (cpu_id) 697 printf(" Id=0x%x", cpu_id); 698 699 if (cpu_vendor_id == CPU_VENDOR_INTEL || 700 cpu_vendor_id == CPU_VENDOR_AMD || 701 cpu_vendor_id == CPU_VENDOR_CENTAUR || 702#ifdef __i386__ 703 cpu_vendor_id == CPU_VENDOR_TRANSMETA || 704 cpu_vendor_id == CPU_VENDOR_RISE || 705 cpu_vendor_id == CPU_VENDOR_NSC || 706 (cpu_vendor_id == CPU_VENDOR_CYRIX && ((cpu_id & 0xf00) > 0x500)) || 707#endif 708 0) { 709 printf(" Family=0x%x", CPUID_TO_FAMILY(cpu_id)); 710 printf(" Model=0x%x", CPUID_TO_MODEL(cpu_id)); 711 printf(" Stepping=%u", cpu_id & CPUID_STEPPING); 712#ifdef __i386__ 713 if (cpu_vendor_id == CPU_VENDOR_CYRIX) 714 printf("\n DIR=0x%04x", cyrix_did); 715#endif 716 717 /* 718 * AMD CPUID Specification 719 * http://support.amd.com/us/Embedded_TechDocs/25481.pdf 720 * 721 * Intel Processor Identification and CPUID Instruction 722 * http://www.intel.com/assets/pdf/appnote/241618.pdf 723 */ 724 if (cpu_high > 0) { 725 726 /* 727 * Here we should probably set up flags indicating 728 * whether or not various features are available. 729 * The interesting ones are probably VME, PSE, PAE, 730 * and PGE. The code already assumes without bothering 731 * to check that all CPUs >= Pentium have a TSC and 732 * MSRs. 733 */ 734 printf("\n Features=0x%b", cpu_feature, 735 "\020" 736 "\001FPU" /* Integral FPU */ 737 "\002VME" /* Extended VM86 mode support */ 738 "\003DE" /* Debugging Extensions (CR4.DE) */ 739 "\004PSE" /* 4MByte page tables */ 740 "\005TSC" /* Timestamp counter */ 741 "\006MSR" /* Machine specific registers */ 742 "\007PAE" /* Physical address extension */ 743 "\010MCE" /* Machine Check support */ 744 "\011CX8" /* CMPEXCH8 instruction */ 745 "\012APIC" /* SMP local APIC */ 746 "\013oldMTRR" /* Previous implementation of MTRR */ 747 "\014SEP" /* Fast System Call */ 748 "\015MTRR" /* Memory Type Range Registers */ 749 "\016PGE" /* PG_G (global bit) support */ 750 "\017MCA" /* Machine Check Architecture */ 751 "\020CMOV" /* CMOV instruction */ 752 "\021PAT" /* Page attributes table */ 753 "\022PSE36" /* 36 bit address space support */ 754 "\023PN" /* Processor Serial number */ 755 "\024CLFLUSH" /* Has the CLFLUSH instruction */ 756 "\025<b20>" 757 "\026DTS" /* Debug Trace Store */ 758 "\027ACPI" /* ACPI support */ 759 "\030MMX" /* MMX instructions */ 760 "\031FXSR" /* FXSAVE/FXRSTOR */ 761 "\032SSE" /* Streaming SIMD Extensions */ 762 "\033SSE2" /* Streaming SIMD Extensions #2 */ 763 "\034SS" /* Self snoop */ 764 "\035HTT" /* Hyperthreading (see EBX bit 16-23) */ 765 "\036TM" /* Thermal Monitor clock slowdown */ 766 "\037IA64" /* CPU can execute IA64 instructions */ 767 "\040PBE" /* Pending Break Enable */ 768 ); 769 770 if (cpu_feature2 != 0) { 771 printf("\n Features2=0x%b", cpu_feature2, 772 "\020" 773 "\001SSE3" /* SSE3 */ 774 "\002PCLMULQDQ" /* Carry-Less Mul Quadword */ 775 "\003DTES64" /* 64-bit Debug Trace */ 776 "\004MON" /* MONITOR/MWAIT Instructions */ 777 "\005DS_CPL" /* CPL Qualified Debug Store */ 778 "\006VMX" /* Virtual Machine Extensions */ 779 "\007SMX" /* Safer Mode Extensions */ 780 "\010EST" /* Enhanced SpeedStep */ 781 "\011TM2" /* Thermal Monitor 2 */ 782 "\012SSSE3" /* SSSE3 */ 783 "\013CNXT-ID" /* L1 context ID available */ 784 "\014SDBG" /* IA32 silicon debug */ 785 "\015FMA" /* Fused Multiply Add */ 786 "\016CX16" /* CMPXCHG16B Instruction */ 787 "\017xTPR" /* Send Task Priority Messages*/ 788 "\020PDCM" /* Perf/Debug Capability MSR */ 789 "\021<b16>" 790 "\022PCID" /* Process-context Identifiers*/ 791 "\023DCA" /* Direct Cache Access */ 792 "\024SSE4.1" /* SSE 4.1 */ 793 "\025SSE4.2" /* SSE 4.2 */ 794 "\026x2APIC" /* xAPIC Extensions */ 795 "\027MOVBE" /* MOVBE Instruction */ 796 "\030POPCNT" /* POPCNT Instruction */ 797 "\031TSCDLT" /* TSC-Deadline Timer */ 798 "\032AESNI" /* AES Crypto */ 799 "\033XSAVE" /* XSAVE/XRSTOR States */ 800 "\034OSXSAVE" /* OS-Enabled State Management*/ 801 "\035AVX" /* Advanced Vector Extensions */ 802 "\036F16C" /* Half-precision conversions */ 803 "\037RDRAND" /* RDRAND Instruction */ 804 "\040HV" /* Hypervisor */ 805 ); 806 } 807 808 if (amd_feature != 0) { 809 printf("\n AMD Features=0x%b", amd_feature, 810 "\020" /* in hex */ 811 "\001<s0>" /* Same */ 812 "\002<s1>" /* Same */ 813 "\003<s2>" /* Same */ 814 "\004<s3>" /* Same */ 815 "\005<s4>" /* Same */ 816 "\006<s5>" /* Same */ 817 "\007<s6>" /* Same */ 818 "\010<s7>" /* Same */ 819 "\011<s8>" /* Same */ 820 "\012<s9>" /* Same */ 821 "\013<b10>" /* Undefined */ 822 "\014SYSCALL" /* Have SYSCALL/SYSRET */ 823 "\015<s12>" /* Same */ 824 "\016<s13>" /* Same */ 825 "\017<s14>" /* Same */ 826 "\020<s15>" /* Same */ 827 "\021<s16>" /* Same */ 828 "\022<s17>" /* Same */ 829 "\023<b18>" /* Reserved, unknown */ 830 "\024MP" /* Multiprocessor Capable */ 831 "\025NX" /* Has EFER.NXE, NX */ 832 "\026<b21>" /* Undefined */ 833 "\027MMX+" /* AMD MMX Extensions */ 834 "\030<s23>" /* Same */ 835 "\031<s24>" /* Same */ 836 "\032FFXSR" /* Fast FXSAVE/FXRSTOR */ 837 "\033Page1GB" /* 1-GB large page support */ 838 "\034RDTSCP" /* RDTSCP */ 839 "\035<b28>" /* Undefined */ 840 "\036LM" /* 64 bit long mode */ 841 "\0373DNow!+" /* AMD 3DNow! Extensions */ 842 "\0403DNow!" /* AMD 3DNow! */ 843 ); 844 } 845 846 if (amd_feature2 != 0) { 847 printf("\n AMD Features2=0x%b", amd_feature2, 848 "\020" 849 "\001LAHF" /* LAHF/SAHF in long mode */ 850 "\002CMP" /* CMP legacy */ 851 "\003SVM" /* Secure Virtual Mode */ 852 "\004ExtAPIC" /* Extended APIC register */ 853 "\005CR8" /* CR8 in legacy mode */ 854 "\006ABM" /* LZCNT instruction */ 855 "\007SSE4A" /* SSE4A */ 856 "\010MAS" /* Misaligned SSE mode */ 857 "\011Prefetch" /* 3DNow! Prefetch/PrefetchW */ 858 "\012OSVW" /* OS visible workaround */ 859 "\013IBS" /* Instruction based sampling */ 860 "\014XOP" /* XOP extended instructions */ 861 "\015SKINIT" /* SKINIT/STGI */ 862 "\016WDT" /* Watchdog timer */ 863 "\017<b14>" 864 "\020LWP" /* Lightweight Profiling */ 865 "\021FMA4" /* 4-operand FMA instructions */ 866 "\022TCE" /* Translation Cache Extension */ 867 "\023<b18>" 868 "\024NodeId" /* NodeId MSR support */ 869 "\025<b20>" 870 "\026TBM" /* Trailing Bit Manipulation */ 871 "\027Topology" /* Topology Extensions */ 872 "\030PCXC" /* Core perf count */ 873 "\031PNXC" /* NB perf count */ 874 "\032<b25>" 875 "\033DBE" /* Data Breakpoint extension */ 876 "\034PTSC" /* Performance TSC */ 877 "\035PL2I" /* L2I perf count */ 878 "\036<b29>" 879 "\037<b30>" 880 "\040<b31>" 881 ); 882 } 883 884 if (cpu_stdext_feature != 0) { 885 printf("\n Structured Extended Features=0x%b", 886 cpu_stdext_feature, 887 "\020" 888 /* RDFSBASE/RDGSBASE/WRFSBASE/WRGSBASE */ 889 "\001FSGSBASE" 890 "\002TSCADJ" 891 "\003SGX" 892 /* Bit Manipulation Instructions */ 893 "\004BMI1" 894 /* Hardware Lock Elision */ 895 "\005HLE" 896 /* Advanced Vector Instructions 2 */ 897 "\006AVX2" 898 /* FDP_EXCPTN_ONLY */ 899 "\007FDPEXC" 900 /* Supervisor Mode Execution Prot. */ 901 "\010SMEP" 902 /* Bit Manipulation Instructions */ 903 "\011BMI2" 904 "\012ERMS" 905 /* Invalidate Processor Context ID */ 906 "\013INVPCID" 907 /* Restricted Transactional Memory */ 908 "\014RTM" 909 "\015PQM" 910 "\016NFPUSG" 911 /* Intel Memory Protection Extensions */ 912 "\017MPX" 913 "\020PQE" 914 /* AVX512 Foundation */ 915 "\021AVX512F" 916 /* Enhanced NRBG */ 917 "\023RDSEED" 918 /* ADCX + ADOX */ 919 "\024ADX" 920 /* Supervisor Mode Access Prevention */ 921 "\025SMAP" 922 "\030CLFLUSHOPT" 923 "\032PROCTRACE" 924 "\033AVX512PF" 925 "\034AVX512ER" 926 "\035AVX512CD" 927 "\036SHA" 928 ); 929 } 930 931 if (cpu_stdext_feature2 != 0) { 932 printf("\n Structured Extended Features2=0x%b", 933 cpu_stdext_feature2, 934 "\020" 935 "\001PREFETCHWT1" 936 "\003UMIP" 937 "\004PKU" 938 "\005OSPKE" 939 "\027RDPID" 940 "\037SGXLC" 941 ); 942 } 943 944 if ((cpu_feature2 & CPUID2_XSAVE) != 0) { 945 cpuid_count(0xd, 0x1, regs); 946 if (regs[0] != 0) { 947 printf("\n XSAVE Features=0x%b", 948 regs[0], 949 "\020" 950 "\001XSAVEOPT" 951 "\002XSAVEC" 952 "\003XINUSE" 953 "\004XSAVES"); 954 } 955 } 956 957 if (via_feature_rng != 0 || via_feature_xcrypt != 0) 958 print_via_padlock_info(); 959 960 if (cpu_feature2 & CPUID2_VMX) 961 print_vmx_info(); 962 963 if (amd_feature2 & AMDID2_SVM) 964 print_svm_info(); 965 966 if ((cpu_feature & CPUID_HTT) && 967 cpu_vendor_id == CPU_VENDOR_AMD) 968 cpu_feature &= ~CPUID_HTT; 969 970 /* 971 * If this CPU supports P-state invariant TSC then 972 * mention the capability. 973 */ 974 if (tsc_is_invariant) { 975 printf("\n TSC: P-state invariant"); 976 if (tsc_perf_stat) 977 printf(", performance statistics"); 978 } 979 } 980#ifdef __i386__ 981 } else if (cpu_vendor_id == CPU_VENDOR_CYRIX) { 982 printf(" DIR=0x%04x", cyrix_did); 983 printf(" Stepping=%u", (cyrix_did & 0xf000) >> 12); 984 printf(" Revision=%u", (cyrix_did & 0x0f00) >> 8); 985#ifndef CYRIX_CACHE_REALLY_WORKS 986 if (cpu == CPU_M1 && (cyrix_did & 0xff00) < 0x1700) 987 printf("\n CPU cache: write-through mode"); 988#endif 989#endif 990 } 991 992 /* Avoid ugly blank lines: only print newline when we have to. */ 993 if (*cpu_vendor || cpu_id) 994 printf("\n"); 995 996 if (bootverbose) { 997 if (cpu_vendor_id == CPU_VENDOR_AMD) 998 print_AMD_info(); 999 else if (cpu_vendor_id == CPU_VENDOR_INTEL) 1000 print_INTEL_info(); 1001#ifdef __i386__ 1002 else if (cpu_vendor_id == CPU_VENDOR_TRANSMETA) 1003 print_transmeta_info(); 1004#endif 1005 } 1006 1007 print_hypervisor_info(); 1008} 1009 1010void 1011panicifcpuunsupported(void) 1012{ 1013 1014#ifdef __i386__ 1015#if !defined(lint) 1016#if !defined(I486_CPU) && !defined(I586_CPU) && !defined(I686_CPU) 1017#error This kernel is not configured for one of the supported CPUs 1018#endif 1019#else /* lint */ 1020#endif /* lint */ 1021#else /* __amd64__ */ 1022#ifndef HAMMER 1023#error "You need to specify a cpu type" 1024#endif 1025#endif 1026 /* 1027 * Now that we have told the user what they have, 1028 * let them know if that machine type isn't configured. 1029 */ 1030 switch (cpu_class) { 1031#ifdef __i386__ 1032 case CPUCLASS_286: /* a 286 should not make it this far, anyway */ 1033 case CPUCLASS_386: 1034#if !defined(I486_CPU) 1035 case CPUCLASS_486: 1036#endif 1037#if !defined(I586_CPU) 1038 case CPUCLASS_586: 1039#endif 1040#if !defined(I686_CPU) 1041 case CPUCLASS_686: 1042#endif 1043#else /* __amd64__ */ 1044 case CPUCLASS_X86: 1045#ifndef HAMMER 1046 case CPUCLASS_K8: 1047#endif 1048#endif 1049 panic("CPU class not configured"); 1050 default: 1051 break; 1052 } 1053} 1054 1055#ifdef __i386__ 1056static volatile u_int trap_by_rdmsr; 1057 1058/* 1059 * Special exception 6 handler. 1060 * The rdmsr instruction generates invalid opcodes fault on 486-class 1061 * Cyrix CPU. Stacked eip register points the rdmsr instruction in the 1062 * function identblue() when this handler is called. Stacked eip should 1063 * be advanced. 1064 */ 1065inthand_t bluetrap6; 1066#ifdef __GNUCLIKE_ASM 1067__asm 1068(" \n\ 1069 .text \n\ 1070 .p2align 2,0x90 \n\ 1071 .type " __XSTRING(CNAME(bluetrap6)) ",@function \n\ 1072" __XSTRING(CNAME(bluetrap6)) ": \n\ 1073 ss \n\ 1074 movl $0xa8c1d," __XSTRING(CNAME(trap_by_rdmsr)) " \n\ 1075 addl $2, (%esp) /* rdmsr is a 2-byte instruction */ \n\ 1076 iret \n\ 1077"); 1078#endif 1079 1080/* 1081 * Special exception 13 handler. 1082 * Accessing non-existent MSR generates general protection fault. 1083 */ 1084inthand_t bluetrap13; 1085#ifdef __GNUCLIKE_ASM 1086__asm 1087(" \n\ 1088 .text \n\ 1089 .p2align 2,0x90 \n\ 1090 .type " __XSTRING(CNAME(bluetrap13)) ",@function \n\ 1091" __XSTRING(CNAME(bluetrap13)) ": \n\ 1092 ss \n\ 1093 movl $0xa89c4," __XSTRING(CNAME(trap_by_rdmsr)) " \n\ 1094 popl %eax /* discard error code */ \n\ 1095 addl $2, (%esp) /* rdmsr is a 2-byte instruction */ \n\ 1096 iret \n\ 1097"); 1098#endif 1099 1100/* 1101 * Distinguish IBM Blue Lightning CPU from Cyrix CPUs that does not 1102 * support cpuid instruction. This function should be called after 1103 * loading interrupt descriptor table register. 1104 * 1105 * I don't like this method that handles fault, but I couldn't get 1106 * information for any other methods. Does blue giant know? 1107 */ 1108static int 1109identblue(void) 1110{ 1111 1112 trap_by_rdmsr = 0; 1113 1114 /* 1115 * Cyrix 486-class CPU does not support rdmsr instruction. 1116 * The rdmsr instruction generates invalid opcode fault, and exception 1117 * will be trapped by bluetrap6() on Cyrix 486-class CPU. The 1118 * bluetrap6() set the magic number to trap_by_rdmsr. 1119 */ 1120 setidt(IDT_UD, bluetrap6, SDT_SYS386TGT, SEL_KPL, 1121 GSEL(GCODE_SEL, SEL_KPL)); 1122 1123 /* 1124 * Certain BIOS disables cpuid instruction of Cyrix 6x86MX CPU. 1125 * In this case, rdmsr generates general protection fault, and 1126 * exception will be trapped by bluetrap13(). 1127 */ 1128 setidt(IDT_GP, bluetrap13, SDT_SYS386TGT, SEL_KPL, 1129 GSEL(GCODE_SEL, SEL_KPL)); 1130 1131 rdmsr(0x1002); /* Cyrix CPU generates fault. */ 1132 1133 if (trap_by_rdmsr == 0xa8c1d) 1134 return IDENTBLUE_CYRIX486; 1135 else if (trap_by_rdmsr == 0xa89c4) 1136 return IDENTBLUE_CYRIXM2; 1137 return IDENTBLUE_IBMCPU; 1138} 1139 1140 1141/* 1142 * identifycyrix() set lower 16 bits of cyrix_did as follows: 1143 * 1144 * F E D C B A 9 8 7 6 5 4 3 2 1 0 1145 * +-------+-------+---------------+ 1146 * | SID | RID | Device ID | 1147 * | (DIR 1) | (DIR 0) | 1148 * +-------+-------+---------------+ 1149 */ 1150static void 1151identifycyrix(void) 1152{ 1153 register_t saveintr; 1154 int ccr2_test = 0, dir_test = 0; 1155 u_char ccr2, ccr3; 1156 1157 saveintr = intr_disable(); 1158 1159 ccr2 = read_cyrix_reg(CCR2); 1160 write_cyrix_reg(CCR2, ccr2 ^ CCR2_LOCK_NW); 1161 read_cyrix_reg(CCR2); 1162 if (read_cyrix_reg(CCR2) != ccr2) 1163 ccr2_test = 1; 1164 write_cyrix_reg(CCR2, ccr2); 1165 1166 ccr3 = read_cyrix_reg(CCR3); 1167 write_cyrix_reg(CCR3, ccr3 ^ CCR3_MAPEN3); 1168 read_cyrix_reg(CCR3); 1169 if (read_cyrix_reg(CCR3) != ccr3) 1170 dir_test = 1; /* CPU supports DIRs. */ 1171 write_cyrix_reg(CCR3, ccr3); 1172 1173 if (dir_test) { 1174 /* Device ID registers are available. */ 1175 cyrix_did = read_cyrix_reg(DIR1) << 8; 1176 cyrix_did += read_cyrix_reg(DIR0); 1177 } else if (ccr2_test) 1178 cyrix_did = 0x0010; /* 486S A-step */ 1179 else 1180 cyrix_did = 0x00ff; /* Old 486SLC/DLC and TI486SXLC/SXL */ 1181 1182 intr_restore(saveintr); 1183} 1184#endif 1185 1186/* Update TSC freq with the value indicated by the caller. */ 1187static void 1188tsc_freq_changed(void *arg __unused, const struct cf_level *level, int status) 1189{ 1190 1191 /* If there was an error during the transition, don't do anything. */ 1192 if (status != 0) 1193 return; 1194 1195 /* Total setting for this level gives the new frequency in MHz. */ 1196 hw_clockrate = level->total_set.freq; 1197} 1198 1199static void 1200hook_tsc_freq(void *arg __unused) 1201{ 1202 1203 if (tsc_is_invariant) 1204 return; 1205 1206 tsc_post_tag = EVENTHANDLER_REGISTER(cpufreq_post_change, 1207 tsc_freq_changed, NULL, EVENTHANDLER_PRI_ANY); 1208} 1209 1210SYSINIT(hook_tsc_freq, SI_SUB_CONFIGURE, SI_ORDER_ANY, hook_tsc_freq, NULL); 1211 1212#ifndef XEN 1213static const char *const vm_bnames[] = { 1214 "QEMU", /* QEMU */ 1215 "Plex86", /* Plex86 */ 1216 "Bochs", /* Bochs */ 1217 "Xen", /* Xen */ 1218 "BHYVE", /* bhyve */ 1219 "Seabios", /* KVM */ 1220 NULL 1221}; 1222 1223static const char *const vm_pnames[] = { 1224 "VMware Virtual Platform", /* VMWare VM */ 1225 "Virtual Machine", /* Microsoft VirtualPC */ 1226 "VirtualBox", /* Sun xVM VirtualBox */ 1227 "Parallels Virtual Platform", /* Parallels VM */ 1228 "KVM", /* KVM */ 1229 NULL 1230}; 1231 1232static void 1233identify_hypervisor(void) 1234{ 1235 u_int regs[4]; 1236 char *p; 1237 int i; 1238 1239 /* 1240 * [RFC] CPUID usage for interaction between Hypervisors and Linux. 1241 * http://lkml.org/lkml/2008/10/1/246 1242 * 1243 * KB1009458: Mechanisms to determine if software is running in 1244 * a VMware virtual machine 1245 * http://kb.vmware.com/kb/1009458 1246 */ 1247 if (cpu_feature2 & CPUID2_HV) { 1248 vm_guest = VM_GUEST_VM; 1249 do_cpuid(0x40000000, regs); 1250 if (regs[0] >= 0x40000000) { 1251 hv_high = regs[0]; 1252 ((u_int *)&hv_vendor)[0] = regs[1]; 1253 ((u_int *)&hv_vendor)[1] = regs[2]; 1254 ((u_int *)&hv_vendor)[2] = regs[3]; 1255 hv_vendor[12] = '\0'; 1256 if (strcmp(hv_vendor, "VMwareVMware") == 0) 1257 vm_guest = VM_GUEST_VMWARE; 1258 else if (strcmp(hv_vendor, "Microsoft Hv") == 0) 1259 vm_guest = VM_GUEST_HV; 1260 } 1261 return; 1262 } 1263 1264 /* 1265 * Examine SMBIOS strings for older hypervisors. 1266 */ 1267 p = getenv("smbios.system.serial"); 1268 if (p != NULL) { 1269 if (strncmp(p, "VMware-", 7) == 0 || strncmp(p, "VMW", 3) == 0) { 1270 vmware_hvcall(VMW_HVCMD_GETVERSION, regs); 1271 if (regs[1] == VMW_HVMAGIC) { 1272 vm_guest = VM_GUEST_VMWARE; 1273 freeenv(p); 1274 return; 1275 } 1276 } 1277 freeenv(p); 1278 } 1279 1280 /* 1281 * XXX: Some of these entries may not be needed since they were 1282 * added to FreeBSD before the checks above. 1283 */ 1284 p = getenv("smbios.bios.vendor"); 1285 if (p != NULL) { 1286 for (i = 0; vm_bnames[i] != NULL; i++) 1287 if (strcmp(p, vm_bnames[i]) == 0) { 1288 vm_guest = VM_GUEST_VM; 1289 freeenv(p); 1290 return; 1291 } 1292 freeenv(p); 1293 } 1294 p = getenv("smbios.system.product"); 1295 if (p != NULL) { 1296 for (i = 0; vm_pnames[i] != NULL; i++) 1297 if (strcmp(p, vm_pnames[i]) == 0) { 1298 vm_guest = VM_GUEST_VM; 1299 freeenv(p); 1300 return; 1301 } 1302 freeenv(p); 1303 } 1304} 1305#endif 1306 1307bool 1308fix_cpuid(void) 1309{ 1310 uint64_t msr; 1311 1312 /* 1313 * Clear "Limit CPUID Maxval" bit and return true if the caller should 1314 * get the largest standard CPUID function number again if it is set 1315 * from BIOS. It is necessary for probing correct CPU topology later 1316 * and for the correct operation of the AVX-aware userspace. 1317 */ 1318 if (cpu_vendor_id == CPU_VENDOR_INTEL && 1319 ((CPUID_TO_FAMILY(cpu_id) == 0xf && 1320 CPUID_TO_MODEL(cpu_id) >= 0x3) || 1321 (CPUID_TO_FAMILY(cpu_id) == 0x6 && 1322 CPUID_TO_MODEL(cpu_id) >= 0xe))) { 1323 msr = rdmsr(MSR_IA32_MISC_ENABLE); 1324 if ((msr & IA32_MISC_EN_LIMCPUID) != 0) { 1325 msr &= ~IA32_MISC_EN_LIMCPUID; 1326 wrmsr(MSR_IA32_MISC_ENABLE, msr); 1327 return (true); 1328 } 1329 } 1330 1331 /* 1332 * Re-enable AMD Topology Extension that could be disabled by BIOS 1333 * on some notebook processors. Without the extension it's really 1334 * hard to determine the correct CPU cache topology. 1335 * See BIOS and Kernel Developer���s Guide (BKDG) for AMD Family 15h 1336 * Models 60h-6Fh Processors, Publication # 50742. 1337 */ 1338 if (cpu_vendor_id == CPU_VENDOR_AMD && CPUID_TO_FAMILY(cpu_id) == 0x15) { 1339 msr = rdmsr(MSR_EXTFEATURES); 1340 if ((msr & ((uint64_t)1 << 54)) == 0) { 1341 msr |= (uint64_t)1 << 54; 1342 wrmsr(MSR_EXTFEATURES, msr); 1343 return (true); 1344 } 1345 } 1346 return (false); 1347} 1348 1349/* 1350 * Final stage of CPU identification. 1351 */ 1352#ifdef __i386__ 1353void 1354finishidentcpu(void) 1355#else 1356void 1357identify_cpu(void) 1358#endif 1359{ 1360 u_int regs[4], cpu_stdext_disable; 1361#ifdef __i386__ 1362 u_char ccr3; 1363#endif 1364 1365#ifdef __amd64__ 1366 do_cpuid(0, regs); 1367 cpu_high = regs[0]; 1368 ((u_int *)&cpu_vendor)[0] = regs[1]; 1369 ((u_int *)&cpu_vendor)[1] = regs[3]; 1370 ((u_int *)&cpu_vendor)[2] = regs[2]; 1371 cpu_vendor[12] = '\0'; 1372 1373 do_cpuid(1, regs); 1374 cpu_id = regs[0]; 1375 cpu_procinfo = regs[1]; 1376 cpu_feature = regs[3]; 1377 cpu_feature2 = regs[2]; 1378#endif 1379 1380#ifndef XEN 1381 identify_hypervisor(); 1382#endif 1383 cpu_vendor_id = find_cpu_vendor_id(); 1384 1385 if (fix_cpuid()) { 1386 do_cpuid(0, regs); 1387 cpu_high = regs[0]; 1388 } 1389 1390 if (cpu_high >= 5 && (cpu_feature2 & CPUID2_MON) != 0) { 1391 do_cpuid(5, regs); 1392 cpu_mon_mwait_flags = regs[2]; 1393 cpu_mon_min_size = regs[0] & CPUID5_MON_MIN_SIZE; 1394 cpu_mon_max_size = regs[1] & CPUID5_MON_MAX_SIZE; 1395 } 1396 1397 if (cpu_high >= 7) { 1398 cpuid_count(7, 0, regs); 1399 cpu_stdext_feature = regs[1]; 1400 1401 /* 1402 * Some hypervisors fail to filter out unsupported 1403 * extended features. For now, disable the 1404 * extensions, activation of which requires setting a 1405 * bit in CR4, and which VM monitors do not support. 1406 */ 1407 if (cpu_feature2 & CPUID2_HV) { 1408 cpu_stdext_disable = CPUID_STDEXT_FSGSBASE | 1409 CPUID_STDEXT_SMEP; 1410 } else 1411 cpu_stdext_disable = 0; 1412 TUNABLE_INT_FETCH("hw.cpu_stdext_disable", &cpu_stdext_disable); 1413 cpu_stdext_feature &= ~cpu_stdext_disable; 1414 cpu_stdext_feature2 = regs[2]; 1415 } 1416 1417#ifdef __i386__ 1418 if (cpu_high > 0 && 1419 (cpu_vendor_id == CPU_VENDOR_INTEL || 1420 cpu_vendor_id == CPU_VENDOR_AMD || 1421 cpu_vendor_id == CPU_VENDOR_TRANSMETA || 1422 cpu_vendor_id == CPU_VENDOR_CENTAUR || 1423 cpu_vendor_id == CPU_VENDOR_NSC)) { 1424 do_cpuid(0x80000000, regs); 1425 if (regs[0] >= 0x80000000) 1426 cpu_exthigh = regs[0]; 1427 } 1428#else 1429 if (cpu_vendor_id == CPU_VENDOR_INTEL || 1430 cpu_vendor_id == CPU_VENDOR_AMD || 1431 cpu_vendor_id == CPU_VENDOR_CENTAUR) { 1432 do_cpuid(0x80000000, regs); 1433 cpu_exthigh = regs[0]; 1434 } 1435#endif 1436 if (cpu_exthigh >= 0x80000001) { 1437 do_cpuid(0x80000001, regs); 1438 amd_feature = regs[3] & ~(cpu_feature & 0x0183f3ff); 1439 amd_feature2 = regs[2]; 1440 } 1441 if (cpu_exthigh >= 0x80000007) { 1442 do_cpuid(0x80000007, regs); 1443 amd_pminfo = regs[3]; 1444 } 1445 if (cpu_exthigh >= 0x80000008) { 1446 do_cpuid(0x80000008, regs); 1447 cpu_maxphyaddr = regs[0] & 0xff; 1448 cpu_procinfo2 = regs[2]; 1449 } else { 1450 cpu_maxphyaddr = (cpu_feature & CPUID_PAE) != 0 ? 36 : 32; 1451 } 1452 1453#ifdef __i386__ 1454 if (cpu_vendor_id == CPU_VENDOR_CYRIX) { 1455 if (cpu == CPU_486) { 1456 /* 1457 * These conditions are equivalent to: 1458 * - CPU does not support cpuid instruction. 1459 * - Cyrix/IBM CPU is detected. 1460 */ 1461 if (identblue() == IDENTBLUE_IBMCPU) { 1462 strcpy(cpu_vendor, "IBM"); 1463 cpu_vendor_id = CPU_VENDOR_IBM; 1464 cpu = CPU_BLUE; 1465 return; 1466 } 1467 } 1468 switch (cpu_id & 0xf00) { 1469 case 0x600: 1470 /* 1471 * Cyrix's datasheet does not describe DIRs. 1472 * Therefor, I assume it does not have them 1473 * and use the result of the cpuid instruction. 1474 * XXX they seem to have it for now at least. -Peter 1475 */ 1476 identifycyrix(); 1477 cpu = CPU_M2; 1478 break; 1479 default: 1480 identifycyrix(); 1481 /* 1482 * This routine contains a trick. 1483 * Don't check (cpu_id & 0x00f0) == 0x50 to detect M2, now. 1484 */ 1485 switch (cyrix_did & 0x00f0) { 1486 case 0x00: 1487 case 0xf0: 1488 cpu = CPU_486DLC; 1489 break; 1490 case 0x10: 1491 cpu = CPU_CY486DX; 1492 break; 1493 case 0x20: 1494 if ((cyrix_did & 0x000f) < 8) 1495 cpu = CPU_M1; 1496 else 1497 cpu = CPU_M1SC; 1498 break; 1499 case 0x30: 1500 cpu = CPU_M1; 1501 break; 1502 case 0x40: 1503 /* MediaGX CPU */ 1504 cpu = CPU_M1SC; 1505 break; 1506 default: 1507 /* M2 and later CPUs are treated as M2. */ 1508 cpu = CPU_M2; 1509 1510 /* 1511 * enable cpuid instruction. 1512 */ 1513 ccr3 = read_cyrix_reg(CCR3); 1514 write_cyrix_reg(CCR3, CCR3_MAPEN0); 1515 write_cyrix_reg(CCR4, read_cyrix_reg(CCR4) | CCR4_CPUID); 1516 write_cyrix_reg(CCR3, ccr3); 1517 1518 do_cpuid(0, regs); 1519 cpu_high = regs[0]; /* eax */ 1520 do_cpuid(1, regs); 1521 cpu_id = regs[0]; /* eax */ 1522 cpu_feature = regs[3]; /* edx */ 1523 break; 1524 } 1525 } 1526 } else if (cpu == CPU_486 && *cpu_vendor == '\0') { 1527 /* 1528 * There are BlueLightning CPUs that do not change 1529 * undefined flags by dividing 5 by 2. In this case, 1530 * the CPU identification routine in locore.s leaves 1531 * cpu_vendor null string and puts CPU_486 into the 1532 * cpu. 1533 */ 1534 if (identblue() == IDENTBLUE_IBMCPU) { 1535 strcpy(cpu_vendor, "IBM"); 1536 cpu_vendor_id = CPU_VENDOR_IBM; 1537 cpu = CPU_BLUE; 1538 return; 1539 } 1540 } 1541#else 1542 /* XXX */ 1543 cpu = CPU_CLAWHAMMER; 1544#endif 1545} 1546 1547static u_int 1548find_cpu_vendor_id(void) 1549{ 1550 int i; 1551 1552 for (i = 0; i < sizeof(cpu_vendors) / sizeof(cpu_vendors[0]); i++) 1553 if (strcmp(cpu_vendor, cpu_vendors[i].vendor) == 0) 1554 return (cpu_vendors[i].vendor_id); 1555 return (0); 1556} 1557 1558static void 1559print_AMD_assoc(int i) 1560{ 1561 if (i == 255) 1562 printf(", fully associative\n"); 1563 else 1564 printf(", %d-way associative\n", i); 1565} 1566 1567static void 1568print_AMD_l2_assoc(int i) 1569{ 1570 switch (i & 0x0f) { 1571 case 0: printf(", disabled/not present\n"); break; 1572 case 1: printf(", direct mapped\n"); break; 1573 case 2: printf(", 2-way associative\n"); break; 1574 case 4: printf(", 4-way associative\n"); break; 1575 case 6: printf(", 8-way associative\n"); break; 1576 case 8: printf(", 16-way associative\n"); break; 1577 case 15: printf(", fully associative\n"); break; 1578 default: printf(", reserved configuration\n"); break; 1579 } 1580} 1581 1582static void 1583print_AMD_info(void) 1584{ 1585#ifdef __i386__ 1586 uint64_t amd_whcr; 1587#endif 1588 u_int regs[4]; 1589 1590 if (cpu_exthigh >= 0x80000005) { 1591 do_cpuid(0x80000005, regs); 1592 printf("L1 2MB data TLB: %d entries", (regs[0] >> 16) & 0xff); 1593 print_AMD_assoc(regs[0] >> 24); 1594 1595 printf("L1 2MB instruction TLB: %d entries", regs[0] & 0xff); 1596 print_AMD_assoc((regs[0] >> 8) & 0xff); 1597 1598 printf("L1 4KB data TLB: %d entries", (regs[1] >> 16) & 0xff); 1599 print_AMD_assoc(regs[1] >> 24); 1600 1601 printf("L1 4KB instruction TLB: %d entries", regs[1] & 0xff); 1602 print_AMD_assoc((regs[1] >> 8) & 0xff); 1603 1604 printf("L1 data cache: %d kbytes", regs[2] >> 24); 1605 printf(", %d bytes/line", regs[2] & 0xff); 1606 printf(", %d lines/tag", (regs[2] >> 8) & 0xff); 1607 print_AMD_assoc((regs[2] >> 16) & 0xff); 1608 1609 printf("L1 instruction cache: %d kbytes", regs[3] >> 24); 1610 printf(", %d bytes/line", regs[3] & 0xff); 1611 printf(", %d lines/tag", (regs[3] >> 8) & 0xff); 1612 print_AMD_assoc((regs[3] >> 16) & 0xff); 1613 } 1614 1615 if (cpu_exthigh >= 0x80000006) { 1616 do_cpuid(0x80000006, regs); 1617 if ((regs[0] >> 16) != 0) { 1618 printf("L2 2MB data TLB: %d entries", 1619 (regs[0] >> 16) & 0xfff); 1620 print_AMD_l2_assoc(regs[0] >> 28); 1621 printf("L2 2MB instruction TLB: %d entries", 1622 regs[0] & 0xfff); 1623 print_AMD_l2_assoc((regs[0] >> 28) & 0xf); 1624 } else { 1625 printf("L2 2MB unified TLB: %d entries", 1626 regs[0] & 0xfff); 1627 print_AMD_l2_assoc((regs[0] >> 28) & 0xf); 1628 } 1629 if ((regs[1] >> 16) != 0) { 1630 printf("L2 4KB data TLB: %d entries", 1631 (regs[1] >> 16) & 0xfff); 1632 print_AMD_l2_assoc(regs[1] >> 28); 1633 1634 printf("L2 4KB instruction TLB: %d entries", 1635 (regs[1] >> 16) & 0xfff); 1636 print_AMD_l2_assoc((regs[1] >> 28) & 0xf); 1637 } else { 1638 printf("L2 4KB unified TLB: %d entries", 1639 (regs[1] >> 16) & 0xfff); 1640 print_AMD_l2_assoc((regs[1] >> 28) & 0xf); 1641 } 1642 printf("L2 unified cache: %d kbytes", regs[2] >> 16); 1643 printf(", %d bytes/line", regs[2] & 0xff); 1644 printf(", %d lines/tag", (regs[2] >> 8) & 0x0f); 1645 print_AMD_l2_assoc((regs[2] >> 12) & 0x0f); 1646 } 1647 1648#ifdef __i386__ 1649 if (((cpu_id & 0xf00) == 0x500) 1650 && (((cpu_id & 0x0f0) > 0x80) 1651 || (((cpu_id & 0x0f0) == 0x80) 1652 && (cpu_id & 0x00f) > 0x07))) { 1653 /* K6-2(new core [Stepping 8-F]), K6-III or later */ 1654 amd_whcr = rdmsr(0xc0000082); 1655 if (!(amd_whcr & (0x3ff << 22))) { 1656 printf("Write Allocate Disable\n"); 1657 } else { 1658 printf("Write Allocate Enable Limit: %dM bytes\n", 1659 (u_int32_t)((amd_whcr & (0x3ff << 22)) >> 22) * 4); 1660 printf("Write Allocate 15-16M bytes: %s\n", 1661 (amd_whcr & (1 << 16)) ? "Enable" : "Disable"); 1662 } 1663 } else if (((cpu_id & 0xf00) == 0x500) 1664 && ((cpu_id & 0x0f0) > 0x50)) { 1665 /* K6, K6-2(old core) */ 1666 amd_whcr = rdmsr(0xc0000082); 1667 if (!(amd_whcr & (0x7f << 1))) { 1668 printf("Write Allocate Disable\n"); 1669 } else { 1670 printf("Write Allocate Enable Limit: %dM bytes\n", 1671 (u_int32_t)((amd_whcr & (0x7f << 1)) >> 1) * 4); 1672 printf("Write Allocate 15-16M bytes: %s\n", 1673 (amd_whcr & 0x0001) ? "Enable" : "Disable"); 1674 printf("Hardware Write Allocate Control: %s\n", 1675 (amd_whcr & 0x0100) ? "Enable" : "Disable"); 1676 } 1677 } 1678#endif 1679 /* 1680 * Opteron Rev E shows a bug as in very rare occasions a read memory 1681 * barrier is not performed as expected if it is followed by a 1682 * non-atomic read-modify-write instruction. 1683 * As long as that bug pops up very rarely (intensive machine usage 1684 * on other operating systems generally generates one unexplainable 1685 * crash any 2 months) and as long as a model specific fix would be 1686 * impratical at this stage, print out a warning string if the broken 1687 * model and family are identified. 1688 */ 1689 if (CPUID_TO_FAMILY(cpu_id) == 0xf && CPUID_TO_MODEL(cpu_id) >= 0x20 && 1690 CPUID_TO_MODEL(cpu_id) <= 0x3f) 1691 printf("WARNING: This architecture revision has known SMP " 1692 "hardware bugs which may cause random instability\n"); 1693} 1694 1695static void 1696print_INTEL_info(void) 1697{ 1698 u_int regs[4]; 1699 u_int rounds, regnum; 1700 u_int nwaycode, nway; 1701 1702 if (cpu_high >= 2) { 1703 rounds = 0; 1704 do { 1705 do_cpuid(0x2, regs); 1706 if (rounds == 0 && (rounds = (regs[0] & 0xff)) == 0) 1707 break; /* we have a buggy CPU */ 1708 1709 for (regnum = 0; regnum <= 3; ++regnum) { 1710 if (regs[regnum] & (1<<31)) 1711 continue; 1712 if (regnum != 0) 1713 print_INTEL_TLB(regs[regnum] & 0xff); 1714 print_INTEL_TLB((regs[regnum] >> 8) & 0xff); 1715 print_INTEL_TLB((regs[regnum] >> 16) & 0xff); 1716 print_INTEL_TLB((regs[regnum] >> 24) & 0xff); 1717 } 1718 } while (--rounds > 0); 1719 } 1720 1721 if (cpu_exthigh >= 0x80000006) { 1722 do_cpuid(0x80000006, regs); 1723 nwaycode = (regs[2] >> 12) & 0x0f; 1724 if (nwaycode >= 0x02 && nwaycode <= 0x08) 1725 nway = 1 << (nwaycode / 2); 1726 else 1727 nway = 0; 1728 printf("L2 cache: %u kbytes, %u-way associative, %u bytes/line\n", 1729 (regs[2] >> 16) & 0xffff, nway, regs[2] & 0xff); 1730 } 1731} 1732 1733static void 1734print_INTEL_TLB(u_int data) 1735{ 1736 switch (data) { 1737 case 0x0: 1738 case 0x40: 1739 default: 1740 break; 1741 case 0x1: 1742 printf("Instruction TLB: 4 KB pages, 4-way set associative, 32 entries\n"); 1743 break; 1744 case 0x2: 1745 printf("Instruction TLB: 4 MB pages, fully associative, 2 entries\n"); 1746 break; 1747 case 0x3: 1748 printf("Data TLB: 4 KB pages, 4-way set associative, 64 entries\n"); 1749 break; 1750 case 0x4: 1751 printf("Data TLB: 4 MB Pages, 4-way set associative, 8 entries\n"); 1752 break; 1753 case 0x6: 1754 printf("1st-level instruction cache: 8 KB, 4-way set associative, 32 byte line size\n"); 1755 break; 1756 case 0x8: 1757 printf("1st-level instruction cache: 16 KB, 4-way set associative, 32 byte line size\n"); 1758 break; 1759 case 0x9: 1760 printf("1st-level instruction cache: 32 KB, 4-way set associative, 64 byte line size\n"); 1761 break; 1762 case 0xa: 1763 printf("1st-level data cache: 8 KB, 2-way set associative, 32 byte line size\n"); 1764 break; 1765 case 0xb: 1766 printf("Instruction TLB: 4 MByte pages, 4-way set associative, 4 entries\n"); 1767 break; 1768 case 0xc: 1769 printf("1st-level data cache: 16 KB, 4-way set associative, 32 byte line size\n"); 1770 break; 1771 case 0xd: 1772 printf("1st-level data cache: 16 KBytes, 4-way set associative, 64 byte line size"); 1773 break; 1774 case 0xe: 1775 printf("1st-level data cache: 24 KBytes, 6-way set associative, 64 byte line size\n"); 1776 break; 1777 case 0x1d: 1778 printf("2nd-level cache: 128 KBytes, 2-way set associative, 64 byte line size\n"); 1779 break; 1780 case 0x21: 1781 printf("2nd-level cache: 256 KBytes, 8-way set associative, 64 byte line size\n"); 1782 break; 1783 case 0x22: 1784 printf("3rd-level cache: 512 KB, 4-way set associative, sectored cache, 64 byte line size\n"); 1785 break; 1786 case 0x23: 1787 printf("3rd-level cache: 1 MB, 8-way set associative, sectored cache, 64 byte line size\n"); 1788 break; 1789 case 0x24: 1790 printf("2nd-level cache: 1 MBytes, 16-way set associative, 64 byte line size\n"); 1791 break; 1792 case 0x25: 1793 printf("3rd-level cache: 2 MB, 8-way set associative, sectored cache, 64 byte line size\n"); 1794 break; 1795 case 0x29: 1796 printf("3rd-level cache: 4 MB, 8-way set associative, sectored cache, 64 byte line size\n"); 1797 break; 1798 case 0x2c: 1799 printf("1st-level data cache: 32 KB, 8-way set associative, 64 byte line size\n"); 1800 break; 1801 case 0x30: 1802 printf("1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size\n"); 1803 break; 1804 case 0x39: /* De-listed in SDM rev. 54 */ 1805 printf("2nd-level cache: 128 KB, 4-way set associative, sectored cache, 64 byte line size\n"); 1806 break; 1807 case 0x3b: /* De-listed in SDM rev. 54 */ 1808 printf("2nd-level cache: 128 KB, 2-way set associative, sectored cache, 64 byte line size\n"); 1809 break; 1810 case 0x3c: /* De-listed in SDM rev. 54 */ 1811 printf("2nd-level cache: 256 KB, 4-way set associative, sectored cache, 64 byte line size\n"); 1812 break; 1813 case 0x41: 1814 printf("2nd-level cache: 128 KB, 4-way set associative, 32 byte line size\n"); 1815 break; 1816 case 0x42: 1817 printf("2nd-level cache: 256 KB, 4-way set associative, 32 byte line size\n"); 1818 break; 1819 case 0x43: 1820 printf("2nd-level cache: 512 KB, 4-way set associative, 32 byte line size\n"); 1821 break; 1822 case 0x44: 1823 printf("2nd-level cache: 1 MB, 4-way set associative, 32 byte line size\n"); 1824 break; 1825 case 0x45: 1826 printf("2nd-level cache: 2 MB, 4-way set associative, 32 byte line size\n"); 1827 break; 1828 case 0x46: 1829 printf("3rd-level cache: 4 MB, 4-way set associative, 64 byte line size\n"); 1830 break; 1831 case 0x47: 1832 printf("3rd-level cache: 8 MB, 8-way set associative, 64 byte line size\n"); 1833 break; 1834 case 0x48: 1835 printf("2nd-level cache: 3MByte, 12-way set associative, 64 byte line size\n"); 1836 break; 1837 case 0x49: 1838 if (CPUID_TO_FAMILY(cpu_id) == 0xf && 1839 CPUID_TO_MODEL(cpu_id) == 0x6) 1840 printf("3rd-level cache: 4MB, 16-way set associative, 64-byte line size\n"); 1841 else 1842 printf("2nd-level cache: 4 MByte, 16-way set associative, 64 byte line size"); 1843 break; 1844 case 0x4a: 1845 printf("3rd-level cache: 6MByte, 12-way set associative, 64 byte line size\n"); 1846 break; 1847 case 0x4b: 1848 printf("3rd-level cache: 8MByte, 16-way set associative, 64 byte line size\n"); 1849 break; 1850 case 0x4c: 1851 printf("3rd-level cache: 12MByte, 12-way set associative, 64 byte line size\n"); 1852 break; 1853 case 0x4d: 1854 printf("3rd-level cache: 16MByte, 16-way set associative, 64 byte line size\n"); 1855 break; 1856 case 0x4e: 1857 printf("2nd-level cache: 6MByte, 24-way set associative, 64 byte line size\n"); 1858 break; 1859 case 0x4f: 1860 printf("Instruction TLB: 4 KByte pages, 32 entries\n"); 1861 break; 1862 case 0x50: 1863 printf("Instruction TLB: 4 KB, 2 MB or 4 MB pages, fully associative, 64 entries\n"); 1864 break; 1865 case 0x51: 1866 printf("Instruction TLB: 4 KB, 2 MB or 4 MB pages, fully associative, 128 entries\n"); 1867 break; 1868 case 0x52: 1869 printf("Instruction TLB: 4 KB, 2 MB or 4 MB pages, fully associative, 256 entries\n"); 1870 break; 1871 case 0x55: 1872 printf("Instruction TLB: 2-MByte or 4-MByte pages, fully associative, 7 entries\n"); 1873 break; 1874 case 0x56: 1875 printf("Data TLB0: 4 MByte pages, 4-way set associative, 16 entries\n"); 1876 break; 1877 case 0x57: 1878 printf("Data TLB0: 4 KByte pages, 4-way associative, 16 entries\n"); 1879 break; 1880 case 0x59: 1881 printf("Data TLB0: 4 KByte pages, fully associative, 16 entries\n"); 1882 break; 1883 case 0x5a: 1884 printf("Data TLB0: 2-MByte or 4 MByte pages, 4-way set associative, 32 entries\n"); 1885 break; 1886 case 0x5b: 1887 printf("Data TLB: 4 KB or 4 MB pages, fully associative, 64 entries\n"); 1888 break; 1889 case 0x5c: 1890 printf("Data TLB: 4 KB or 4 MB pages, fully associative, 128 entries\n"); 1891 break; 1892 case 0x5d: 1893 printf("Data TLB: 4 KB or 4 MB pages, fully associative, 256 entries\n"); 1894 break; 1895 case 0x60: 1896 printf("1st-level data cache: 16 KB, 8-way set associative, sectored cache, 64 byte line size\n"); 1897 break; 1898 case 0x61: 1899 printf("Instruction TLB: 4 KByte pages, fully associative, 48 entries\n"); 1900 break; 1901 case 0x63: 1902 printf("Data TLB: 2 MByte or 4 MByte pages, 4-way set associative, 32 entries and a separate array with 1 GByte pages, 4-way set associative, 4 entries\n"); 1903 break; 1904 case 0x64: 1905 printf("Data TLB: 4 KBytes pages, 4-way set associative, 512 entries\n"); 1906 break; 1907 case 0x66: 1908 printf("1st-level data cache: 8 KB, 4-way set associative, sectored cache, 64 byte line size\n"); 1909 break; 1910 case 0x67: 1911 printf("1st-level data cache: 16 KB, 4-way set associative, sectored cache, 64 byte line size\n"); 1912 break; 1913 case 0x68: 1914 printf("1st-level data cache: 32 KB, 4 way set associative, sectored cache, 64 byte line size\n"); 1915 break; 1916 case 0x6a: 1917 printf("uTLB: 4KByte pages, 8-way set associative, 64 entries\n"); 1918 break; 1919 case 0x6b: 1920 printf("DTLB: 4KByte pages, 8-way set associative, 256 entries\n"); 1921 break; 1922 case 0x6c: 1923 printf("DTLB: 2M/4M pages, 8-way set associative, 128 entries\n"); 1924 break; 1925 case 0x6d: 1926 printf("DTLB: 1 GByte pages, fully associative, 16 entries\n"); 1927 break; 1928 case 0x70: 1929 printf("Trace cache: 12K-uops, 8-way set associative\n"); 1930 break; 1931 case 0x71: 1932 printf("Trace cache: 16K-uops, 8-way set associative\n"); 1933 break; 1934 case 0x72: 1935 printf("Trace cache: 32K-uops, 8-way set associative\n"); 1936 break; 1937 case 0x76: 1938 printf("Instruction TLB: 2M/4M pages, fully associative, 8 entries\n"); 1939 break; 1940 case 0x78: 1941 printf("2nd-level cache: 1 MB, 4-way set associative, 64-byte line size\n"); 1942 break; 1943 case 0x79: 1944 printf("2nd-level cache: 128 KB, 8-way set associative, sectored cache, 64 byte line size\n"); 1945 break; 1946 case 0x7a: 1947 printf("2nd-level cache: 256 KB, 8-way set associative, sectored cache, 64 byte line size\n"); 1948 break; 1949 case 0x7b: 1950 printf("2nd-level cache: 512 KB, 8-way set associative, sectored cache, 64 byte line size\n"); 1951 break; 1952 case 0x7c: 1953 printf("2nd-level cache: 1 MB, 8-way set associative, sectored cache, 64 byte line size\n"); 1954 break; 1955 case 0x7d: 1956 printf("2nd-level cache: 2-MB, 8-way set associative, 64-byte line size\n"); 1957 break; 1958 case 0x7f: 1959 printf("2nd-level cache: 512-KB, 2-way set associative, 64-byte line size\n"); 1960 break; 1961 case 0x80: 1962 printf("2nd-level cache: 512 KByte, 8-way set associative, 64-byte line size\n"); 1963 break; 1964 case 0x82: 1965 printf("2nd-level cache: 256 KB, 8-way set associative, 32 byte line size\n"); 1966 break; 1967 case 0x83: 1968 printf("2nd-level cache: 512 KB, 8-way set associative, 32 byte line size\n"); 1969 break; 1970 case 0x84: 1971 printf("2nd-level cache: 1 MB, 8-way set associative, 32 byte line size\n"); 1972 break; 1973 case 0x85: 1974 printf("2nd-level cache: 2 MB, 8-way set associative, 32 byte line size\n"); 1975 break; 1976 case 0x86: 1977 printf("2nd-level cache: 512 KB, 4-way set associative, 64 byte line size\n"); 1978 break; 1979 case 0x87: 1980 printf("2nd-level cache: 1 MB, 8-way set associative, 64 byte line size\n"); 1981 break; 1982 case 0xa0: 1983 printf("DTLB: 4k pages, fully associative, 32 entries\n"); 1984 break; 1985 case 0xb0: 1986 printf("Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries\n"); 1987 break; 1988 case 0xb1: 1989 printf("Instruction TLB: 2M pages, 4-way, 8 entries or 4M pages, 4-way, 4 entries\n"); 1990 break; 1991 case 0xb2: 1992 printf("Instruction TLB: 4KByte pages, 4-way set associative, 64 entries\n"); 1993 break; 1994 case 0xb3: 1995 printf("Data TLB: 4 KB Pages, 4-way set associative, 128 entries\n"); 1996 break; 1997 case 0xb4: 1998 printf("Data TLB1: 4 KByte pages, 4-way associative, 256 entries\n"); 1999 break; 2000 case 0xb5: 2001 printf("Instruction TLB: 4KByte pages, 8-way set associative, 64 entries\n"); 2002 break; 2003 case 0xb6: 2004 printf("Instruction TLB: 4KByte pages, 8-way set associative, 128 entries\n"); 2005 break; 2006 case 0xba: 2007 printf("Data TLB1: 4 KByte pages, 4-way associative, 64 entries\n"); 2008 break; 2009 case 0xc0: 2010 printf("Data TLB: 4 KByte and 4 MByte pages, 4-way associative, 8 entries\n"); 2011 break; 2012 case 0xc1: 2013 printf("Shared 2nd-Level TLB: 4 KByte/2MByte pages, 8-way associative, 1024 entries\n"); 2014 break; 2015 case 0xc2: 2016 printf("DTLB: 4 KByte/2 MByte pages, 4-way associative, 16 entries\n"); 2017 break; 2018 case 0xc3: 2019 printf("Shared 2nd-Level TLB: 4 KByte /2 MByte pages, 6-way associative, 1536 entries. Also 1GBbyte pages, 4-way, 16 entries\n"); 2020 break; 2021 case 0xc4: 2022 printf("DTLB: 2M/4M Byte pages, 4-way associative, 32 entries\n"); 2023 break; 2024 case 0xca: 2025 printf("Shared 2nd-Level TLB: 4 KByte pages, 4-way associative, 512 entries\n"); 2026 break; 2027 case 0xd0: 2028 printf("3rd-level cache: 512 KByte, 4-way set associative, 64 byte line size\n"); 2029 break; 2030 case 0xd1: 2031 printf("3rd-level cache: 1 MByte, 4-way set associative, 64 byte line size\n"); 2032 break; 2033 case 0xd2: 2034 printf("3rd-level cache: 2 MByte, 4-way set associative, 64 byte line size\n"); 2035 break; 2036 case 0xd6: 2037 printf("3rd-level cache: 1 MByte, 8-way set associative, 64 byte line size\n"); 2038 break; 2039 case 0xd7: 2040 printf("3rd-level cache: 2 MByte, 8-way set associative, 64 byte line size\n"); 2041 break; 2042 case 0xd8: 2043 printf("3rd-level cache: 4 MByte, 8-way set associative, 64 byte line size\n"); 2044 break; 2045 case 0xdc: 2046 printf("3rd-level cache: 1.5 MByte, 12-way set associative, 64 byte line size\n"); 2047 break; 2048 case 0xdd: 2049 printf("3rd-level cache: 3 MByte, 12-way set associative, 64 byte line size\n"); 2050 break; 2051 case 0xde: 2052 printf("3rd-level cache: 6 MByte, 12-way set associative, 64 byte line size\n"); 2053 break; 2054 case 0xe2: 2055 printf("3rd-level cache: 2 MByte, 16-way set associative, 64 byte line size\n"); 2056 break; 2057 case 0xe3: 2058 printf("3rd-level cache: 4 MByte, 16-way set associative, 64 byte line size\n"); 2059 break; 2060 case 0xe4: 2061 printf("3rd-level cache: 8 MByte, 16-way set associative, 64 byte line size\n"); 2062 break; 2063 case 0xea: 2064 printf("3rd-level cache: 12MByte, 24-way set associative, 64 byte line size\n"); 2065 break; 2066 case 0xeb: 2067 printf("3rd-level cache: 18MByte, 24-way set associative, 64 byte line size\n"); 2068 break; 2069 case 0xec: 2070 printf("3rd-level cache: 24MByte, 24-way set associative, 64 byte line size\n"); 2071 break; 2072 case 0xf0: 2073 printf("64-Byte prefetching\n"); 2074 break; 2075 case 0xf1: 2076 printf("128-Byte prefetching\n"); 2077 break; 2078 } 2079} 2080 2081static void 2082print_svm_info(void) 2083{ 2084 u_int features, regs[4]; 2085 uint64_t msr; 2086 int comma; 2087 2088 printf("\n SVM: "); 2089 do_cpuid(0x8000000A, regs); 2090 features = regs[3]; 2091 2092 msr = rdmsr(MSR_VM_CR); 2093 if ((msr & VM_CR_SVMDIS) == VM_CR_SVMDIS) 2094 printf("(disabled in BIOS) "); 2095 2096 if (!bootverbose) { 2097 comma = 0; 2098 if (features & (1 << 0)) { 2099 printf("%sNP", comma ? "," : ""); 2100 comma = 1; 2101 } 2102 if (features & (1 << 3)) { 2103 printf("%sNRIP", comma ? "," : ""); 2104 comma = 1; 2105 } 2106 if (features & (1 << 5)) { 2107 printf("%sVClean", comma ? "," : ""); 2108 comma = 1; 2109 } 2110 if (features & (1 << 6)) { 2111 printf("%sAFlush", comma ? "," : ""); 2112 comma = 1; 2113 } 2114 if (features & (1 << 7)) { 2115 printf("%sDAssist", comma ? "," : ""); 2116 comma = 1; 2117 } 2118 printf("%sNAsids=%d", comma ? "," : "", regs[1]); 2119 return; 2120 } 2121 2122 printf("Features=0x%b", features, 2123 "\020" 2124 "\001NP" /* Nested paging */ 2125 "\002LbrVirt" /* LBR virtualization */ 2126 "\003SVML" /* SVM lock */ 2127 "\004NRIPS" /* NRIP save */ 2128 "\005TscRateMsr" /* MSR based TSC rate control */ 2129 "\006VmcbClean" /* VMCB clean bits */ 2130 "\007FlushByAsid" /* Flush by ASID */ 2131 "\010DecodeAssist" /* Decode assist */ 2132 "\011<b8>" 2133 "\012<b9>" 2134 "\013PauseFilter" /* PAUSE intercept filter */ 2135 "\014<b11>" 2136 "\015PauseFilterThreshold" /* PAUSE filter threshold */ 2137 "\016AVIC" /* virtual interrupt controller */ 2138 ); 2139 printf("\nRevision=%d, ASIDs=%d", regs[0] & 0xff, regs[1]); 2140} 2141 2142#ifdef __i386__ 2143static void 2144print_transmeta_info(void) 2145{ 2146 u_int regs[4], nreg = 0; 2147 2148 do_cpuid(0x80860000, regs); 2149 nreg = regs[0]; 2150 if (nreg >= 0x80860001) { 2151 do_cpuid(0x80860001, regs); 2152 printf(" Processor revision %u.%u.%u.%u\n", 2153 (regs[1] >> 24) & 0xff, 2154 (regs[1] >> 16) & 0xff, 2155 (regs[1] >> 8) & 0xff, 2156 regs[1] & 0xff); 2157 } 2158 if (nreg >= 0x80860002) { 2159 do_cpuid(0x80860002, regs); 2160 printf(" Code Morphing Software revision %u.%u.%u-%u-%u\n", 2161 (regs[1] >> 24) & 0xff, 2162 (regs[1] >> 16) & 0xff, 2163 (regs[1] >> 8) & 0xff, 2164 regs[1] & 0xff, 2165 regs[2]); 2166 } 2167 if (nreg >= 0x80860006) { 2168 char info[65]; 2169 do_cpuid(0x80860003, (u_int*) &info[0]); 2170 do_cpuid(0x80860004, (u_int*) &info[16]); 2171 do_cpuid(0x80860005, (u_int*) &info[32]); 2172 do_cpuid(0x80860006, (u_int*) &info[48]); 2173 info[64] = 0; 2174 printf(" %s\n", info); 2175 } 2176} 2177#endif 2178 2179static void 2180print_via_padlock_info(void) 2181{ 2182 u_int regs[4]; 2183 2184 do_cpuid(0xc0000001, regs); 2185 printf("\n VIA Padlock Features=0x%b", regs[3], 2186 "\020" 2187 "\003RNG" /* RNG */ 2188 "\007AES" /* ACE */ 2189 "\011AES-CTR" /* ACE2 */ 2190 "\013SHA1,SHA256" /* PHE */ 2191 "\015RSA" /* PMM */ 2192 ); 2193} 2194 2195static uint32_t 2196vmx_settable(uint64_t basic, int msr, int true_msr) 2197{ 2198 uint64_t val; 2199 2200 if (basic & (1ULL << 55)) 2201 val = rdmsr(true_msr); 2202 else 2203 val = rdmsr(msr); 2204 2205 /* Just report the controls that can be set to 1. */ 2206 return (val >> 32); 2207} 2208 2209static void 2210print_vmx_info(void) 2211{ 2212 uint64_t basic, msr; 2213 uint32_t entry, exit, mask, pin, proc, proc2; 2214 int comma; 2215 2216 printf("\n VT-x: "); 2217 msr = rdmsr(MSR_IA32_FEATURE_CONTROL); 2218 if (!(msr & IA32_FEATURE_CONTROL_VMX_EN)) 2219 printf("(disabled in BIOS) "); 2220 basic = rdmsr(MSR_VMX_BASIC); 2221 pin = vmx_settable(basic, MSR_VMX_PINBASED_CTLS, 2222 MSR_VMX_TRUE_PINBASED_CTLS); 2223 proc = vmx_settable(basic, MSR_VMX_PROCBASED_CTLS, 2224 MSR_VMX_TRUE_PROCBASED_CTLS); 2225 if (proc & PROCBASED_SECONDARY_CONTROLS) 2226 proc2 = vmx_settable(basic, MSR_VMX_PROCBASED_CTLS2, 2227 MSR_VMX_PROCBASED_CTLS2); 2228 else 2229 proc2 = 0; 2230 exit = vmx_settable(basic, MSR_VMX_EXIT_CTLS, MSR_VMX_TRUE_EXIT_CTLS); 2231 entry = vmx_settable(basic, MSR_VMX_ENTRY_CTLS, MSR_VMX_TRUE_ENTRY_CTLS); 2232 2233 if (!bootverbose) { 2234 comma = 0; 2235 if (exit & VM_EXIT_SAVE_PAT && exit & VM_EXIT_LOAD_PAT && 2236 entry & VM_ENTRY_LOAD_PAT) { 2237 printf("%sPAT", comma ? "," : ""); 2238 comma = 1; 2239 } 2240 if (proc & PROCBASED_HLT_EXITING) { 2241 printf("%sHLT", comma ? "," : ""); 2242 comma = 1; 2243 } 2244 if (proc & PROCBASED_MTF) { 2245 printf("%sMTF", comma ? "," : ""); 2246 comma = 1; 2247 } 2248 if (proc & PROCBASED_PAUSE_EXITING) { 2249 printf("%sPAUSE", comma ? "," : ""); 2250 comma = 1; 2251 } 2252 if (proc2 & PROCBASED2_ENABLE_EPT) { 2253 printf("%sEPT", comma ? "," : ""); 2254 comma = 1; 2255 } 2256 if (proc2 & PROCBASED2_UNRESTRICTED_GUEST) { 2257 printf("%sUG", comma ? "," : ""); 2258 comma = 1; 2259 } 2260 if (proc2 & PROCBASED2_ENABLE_VPID) { 2261 printf("%sVPID", comma ? "," : ""); 2262 comma = 1; 2263 } 2264 if (proc & PROCBASED_USE_TPR_SHADOW && 2265 proc2 & PROCBASED2_VIRTUALIZE_APIC_ACCESSES && 2266 proc2 & PROCBASED2_VIRTUALIZE_X2APIC_MODE && 2267 proc2 & PROCBASED2_APIC_REGISTER_VIRTUALIZATION && 2268 proc2 & PROCBASED2_VIRTUAL_INTERRUPT_DELIVERY) { 2269 printf("%sVID", comma ? "," : ""); 2270 comma = 1; 2271 if (pin & PINBASED_POSTED_INTERRUPT) 2272 printf(",PostIntr"); 2273 } 2274 return; 2275 } 2276 2277 mask = basic >> 32; 2278 printf("Basic Features=0x%b", mask, 2279 "\020" 2280 "\02132PA" /* 32-bit physical addresses */ 2281 "\022SMM" /* SMM dual-monitor */ 2282 "\027INS/OUTS" /* VM-exit info for INS and OUTS */ 2283 "\030TRUE" /* TRUE_CTLS MSRs */ 2284 ); 2285 printf("\n Pin-Based Controls=0x%b", pin, 2286 "\020" 2287 "\001ExtINT" /* External-interrupt exiting */ 2288 "\004NMI" /* NMI exiting */ 2289 "\006VNMI" /* Virtual NMIs */ 2290 "\007PreTmr" /* Activate VMX-preemption timer */ 2291 "\010PostIntr" /* Process posted interrupts */ 2292 ); 2293 printf("\n Primary Processor Controls=0x%b", proc, 2294 "\020" 2295 "\003INTWIN" /* Interrupt-window exiting */ 2296 "\004TSCOff" /* Use TSC offsetting */ 2297 "\010HLT" /* HLT exiting */ 2298 "\012INVLPG" /* INVLPG exiting */ 2299 "\013MWAIT" /* MWAIT exiting */ 2300 "\014RDPMC" /* RDPMC exiting */ 2301 "\015RDTSC" /* RDTSC exiting */ 2302 "\020CR3-LD" /* CR3-load exiting */ 2303 "\021CR3-ST" /* CR3-store exiting */ 2304 "\024CR8-LD" /* CR8-load exiting */ 2305 "\025CR8-ST" /* CR8-store exiting */ 2306 "\026TPR" /* Use TPR shadow */ 2307 "\027NMIWIN" /* NMI-window exiting */ 2308 "\030MOV-DR" /* MOV-DR exiting */ 2309 "\031IO" /* Unconditional I/O exiting */ 2310 "\032IOmap" /* Use I/O bitmaps */ 2311 "\034MTF" /* Monitor trap flag */ 2312 "\035MSRmap" /* Use MSR bitmaps */ 2313 "\036MONITOR" /* MONITOR exiting */ 2314 "\037PAUSE" /* PAUSE exiting */ 2315 ); 2316 if (proc & PROCBASED_SECONDARY_CONTROLS) 2317 printf("\n Secondary Processor Controls=0x%b", proc2, 2318 "\020" 2319 "\001APIC" /* Virtualize APIC accesses */ 2320 "\002EPT" /* Enable EPT */ 2321 "\003DT" /* Descriptor-table exiting */ 2322 "\004RDTSCP" /* Enable RDTSCP */ 2323 "\005x2APIC" /* Virtualize x2APIC mode */ 2324 "\006VPID" /* Enable VPID */ 2325 "\007WBINVD" /* WBINVD exiting */ 2326 "\010UG" /* Unrestricted guest */ 2327 "\011APIC-reg" /* APIC-register virtualization */ 2328 "\012VID" /* Virtual-interrupt delivery */ 2329 "\013PAUSE-loop" /* PAUSE-loop exiting */ 2330 "\014RDRAND" /* RDRAND exiting */ 2331 "\015INVPCID" /* Enable INVPCID */ 2332 "\016VMFUNC" /* Enable VM functions */ 2333 "\017VMCS" /* VMCS shadowing */ 2334 "\020EPT#VE" /* EPT-violation #VE */ 2335 "\021XSAVES" /* Enable XSAVES/XRSTORS */ 2336 ); 2337 printf("\n Exit Controls=0x%b", mask, 2338 "\020" 2339 "\003DR" /* Save debug controls */ 2340 /* Ignore Host address-space size */ 2341 "\015PERF" /* Load MSR_PERF_GLOBAL_CTRL */ 2342 "\020AckInt" /* Acknowledge interrupt on exit */ 2343 "\023PAT-SV" /* Save MSR_PAT */ 2344 "\024PAT-LD" /* Load MSR_PAT */ 2345 "\025EFER-SV" /* Save MSR_EFER */ 2346 "\026EFER-LD" /* Load MSR_EFER */ 2347 "\027PTMR-SV" /* Save VMX-preemption timer value */ 2348 ); 2349 printf("\n Entry Controls=0x%b", mask, 2350 "\020" 2351 "\003DR" /* Save debug controls */ 2352 /* Ignore IA-32e mode guest */ 2353 /* Ignore Entry to SMM */ 2354 /* Ignore Deactivate dual-monitor treatment */ 2355 "\016PERF" /* Load MSR_PERF_GLOBAL_CTRL */ 2356 "\017PAT" /* Load MSR_PAT */ 2357 "\020EFER" /* Load MSR_EFER */ 2358 ); 2359 if (proc & PROCBASED_SECONDARY_CONTROLS && 2360 (proc2 & (PROCBASED2_ENABLE_EPT | PROCBASED2_ENABLE_VPID)) != 0) { 2361 msr = rdmsr(MSR_VMX_EPT_VPID_CAP); 2362 mask = msr; 2363 printf("\n EPT Features=0x%b", mask, 2364 "\020" 2365 "\001XO" /* Execute-only translations */ 2366 "\007PW4" /* Page-walk length of 4 */ 2367 "\011UC" /* EPT paging-structure mem can be UC */ 2368 "\017WB" /* EPT paging-structure mem can be WB */ 2369 "\0212M" /* EPT PDE can map a 2-Mbyte page */ 2370 "\0221G" /* EPT PDPTE can map a 1-Gbyte page */ 2371 "\025INVEPT" /* INVEPT is supported */ 2372 "\026AD" /* Accessed and dirty flags for EPT */ 2373 "\032single" /* INVEPT single-context type */ 2374 "\033all" /* INVEPT all-context type */ 2375 ); 2376 mask = msr >> 32; 2377 printf("\n VPID Features=0x%b", mask, 2378 "\020" 2379 "\001INVVPID" /* INVVPID is supported */ 2380 "\011individual" /* INVVPID individual-address type */ 2381 "\012single" /* INVVPID single-context type */ 2382 "\013all" /* INVVPID all-context type */ 2383 /* INVVPID single-context-retaining-globals type */ 2384 "\014single-globals" 2385 ); 2386 } 2387} 2388 2389static void 2390print_hypervisor_info(void) 2391{ 2392 2393 if (*hv_vendor) 2394 printf("Hypervisor: Origin = \"%s\"\n", hv_vendor); 2395} 2396