sctp_os_bsd.h revision 314327
1/*-
2 * Copyright (c) 2006-2007, by Cisco Systems, Inc. All rights reserved.
3 * Copyright (c) 2008-2012, by Randall Stewart. All rights reserved.
4 * Copyright (c) 2008-2012, by Michael Tuexen. All rights reserved.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions are met:
8 *
9 * a) Redistributions of source code must retain the above copyright notice,
10 *   this list of conditions and the following disclaimer.
11 *
12 * b) Redistributions in binary form must reproduce the above copyright
13 *    notice, this list of conditions and the following disclaimer in
14 *   the documentation and/or other materials provided with the distribution.
15 *
16 * c) Neither the name of Cisco Systems, Inc. nor the names of its
17 *    contributors may be used to endorse or promote products derived
18 *    from this software without specific prior written permission.
19 *
20 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
21 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
22 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
24 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
30 * THE POSSIBILITY OF SUCH DAMAGE.
31 */
32
33#include <sys/cdefs.h>
34__FBSDID("$FreeBSD: stable/10/sys/netinet/sctp_os_bsd.h 314327 2017-02-27 08:27:38Z avg $");
35
36#ifndef _NETINET_SCTP_OS_BSD_H_
37#define _NETINET_SCTP_OS_BSD_H_
38/*
39 * includes
40 */
41#include "opt_ipsec.h"
42#include "opt_compat.h"
43#include "opt_inet6.h"
44#include "opt_inet.h"
45#include "opt_sctp.h"
46
47#include <sys/param.h>
48#include <sys/ktr.h>
49#include <sys/systm.h>
50#include <sys/malloc.h>
51#include <sys/kernel.h>
52#include <sys/sysctl.h>
53#include <sys/mbuf.h>
54#include <sys/protosw.h>
55#include <sys/socket.h>
56#include <sys/socketvar.h>
57#include <sys/jail.h>
58#include <sys/sysctl.h>
59#include <sys/resourcevar.h>
60#include <sys/uio.h>
61#include <sys/lock.h>
62#include <sys/rwlock.h>
63#include <sys/kthread.h>
64#include <sys/priv.h>
65#include <sys/random.h>
66#include <sys/limits.h>
67#include <sys/queue.h>
68#include <machine/cpu.h>
69
70#include <net/if.h>
71#include <net/if_types.h>
72#include <net/if_var.h>
73#include <net/route.h>
74#include <net/vnet.h>
75
76#include <netinet/in.h>
77#include <netinet/in_systm.h>
78#include <netinet/ip.h>
79#include <netinet/in_pcb.h>
80#include <netinet/in_var.h>
81#include <netinet/ip_var.h>
82#include <netinet/ip_icmp.h>
83#include <netinet/icmp_var.h>
84
85#ifdef IPSEC
86#include <netipsec/ipsec.h>
87#include <netipsec/key.h>
88#endif				/* IPSEC */
89
90#ifdef INET6
91#include <sys/domain.h>
92#ifdef IPSEC
93#include <netipsec/ipsec6.h>
94#endif
95#include <netinet/ip6.h>
96#include <netinet6/ip6_var.h>
97#include <netinet6/in6_pcb.h>
98#include <netinet6/ip6protosw.h>
99#include <netinet6/nd6.h>
100#include <netinet6/scope6_var.h>
101#endif				/* INET6 */
102
103
104#include <netinet/ip_options.h>
105
106#include <crypto/sha1.h>
107#include <crypto/sha2/sha256.h>
108
109#ifndef in6pcb
110#define in6pcb		inpcb
111#endif
112/* Declare all the malloc names for all the various mallocs */
113MALLOC_DECLARE(SCTP_M_MAP);
114MALLOC_DECLARE(SCTP_M_STRMI);
115MALLOC_DECLARE(SCTP_M_STRMO);
116MALLOC_DECLARE(SCTP_M_ASC_ADDR);
117MALLOC_DECLARE(SCTP_M_ASC_IT);
118MALLOC_DECLARE(SCTP_M_AUTH_CL);
119MALLOC_DECLARE(SCTP_M_AUTH_KY);
120MALLOC_DECLARE(SCTP_M_AUTH_HL);
121MALLOC_DECLARE(SCTP_M_AUTH_IF);
122MALLOC_DECLARE(SCTP_M_STRESET);
123MALLOC_DECLARE(SCTP_M_CMSG);
124MALLOC_DECLARE(SCTP_M_COPYAL);
125MALLOC_DECLARE(SCTP_M_VRF);
126MALLOC_DECLARE(SCTP_M_IFA);
127MALLOC_DECLARE(SCTP_M_IFN);
128MALLOC_DECLARE(SCTP_M_TIMW);
129MALLOC_DECLARE(SCTP_M_MVRF);
130MALLOC_DECLARE(SCTP_M_ITER);
131MALLOC_DECLARE(SCTP_M_SOCKOPT);
132MALLOC_DECLARE(SCTP_M_MCORE);
133
134#if defined(SCTP_LOCAL_TRACE_BUF)
135
136#define SCTP_GET_CYCLECOUNT get_cyclecount()
137#define SCTP_CTR6 sctp_log_trace
138
139#else
140#define SCTP_CTR6 CTR6
141#endif
142
143/*
144 * Macros to expand out globals defined by various modules
145 * to either a real global or a virtualized instance of one,
146 * depending on whether VIMAGE is defined.
147 */
148/* then define the macro(s) that hook into the vimage macros */
149#define MODULE_GLOBAL(__SYMBOL) V_##__SYMBOL
150
151#define V_system_base_info VNET(system_base_info)
152#define SCTP_BASE_INFO(__m) V_system_base_info.sctppcbinfo.__m
153#define SCTP_BASE_STATS V_system_base_info.sctpstat
154#define SCTP_BASE_STAT(__m) V_system_base_info.sctpstat.__m
155#define SCTP_BASE_SYSCTL(__m) V_system_base_info.sctpsysctl.__m
156#define SCTP_BASE_VAR(__m) V_system_base_info.__m
157
158#define SCTP_PRINTF(params...)	printf(params)
159#if defined(SCTP_DEBUG)
160#define SCTPDBG(level, params...)					\
161{									\
162	do {								\
163		if (SCTP_BASE_SYSCTL(sctp_debug_on) & level ) {		\
164			SCTP_PRINTF(params);				\
165		}							\
166	} while (0);							\
167}
168#define SCTPDBG_ADDR(level, addr)					\
169{									\
170	do {								\
171		if (SCTP_BASE_SYSCTL(sctp_debug_on) & level ) {		\
172			sctp_print_address(addr);			\
173		}							\
174	} while (0);							\
175}
176#else
177#define SCTPDBG(level, params...)
178#define SCTPDBG_ADDR(level, addr)
179#endif
180
181#ifdef SCTP_LTRACE_CHUNKS
182#define SCTP_LTRACE_CHK(a, b, c, d) if(SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_LTRACE_CHUNK_ENABLE) SCTP_CTR6(KTR_SUBSYS, "SCTP:%d[%d]:%x-%x-%x-%x", SCTP_LOG_CHUNK_PROC, 0, a, b, c, d)
183#else
184#define SCTP_LTRACE_CHK(a, b, c, d)
185#endif
186
187#ifdef SCTP_LTRACE_ERRORS
188#define SCTP_LTRACE_ERR_RET_PKT(m, inp, stcb, net, file, err) \
189	if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_LTRACE_ERROR_ENABLE) \
190		SCTP_PRINTF("mbuf:%p inp:%p stcb:%p net:%p file:%x line:%d error:%d\n", \
191		            m, inp, stcb, net, file, __LINE__, err);
192#define SCTP_LTRACE_ERR_RET(inp, stcb, net, file, err) \
193	if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_LTRACE_ERROR_ENABLE) \
194		SCTP_PRINTF("inp:%p stcb:%p net:%p file:%x line:%d error:%d\n", \
195		            inp, stcb, net, file, __LINE__, err);
196#else
197#define SCTP_LTRACE_ERR_RET_PKT(m, inp, stcb, net, file, err)
198#define SCTP_LTRACE_ERR_RET(inp, stcb, net, file, err)
199#endif
200
201
202/*
203 * Local address and interface list handling
204 */
205#define SCTP_MAX_VRF_ID		0
206#define SCTP_SIZE_OF_VRF_HASH	3
207#define SCTP_IFNAMSIZ		IFNAMSIZ
208#define SCTP_DEFAULT_VRFID	0
209#define SCTP_VRF_ADDR_HASH_SIZE	16
210#define SCTP_VRF_IFN_HASH_SIZE	3
211#define	SCTP_INIT_VRF_TABLEID(vrf)
212
213#define SCTP_IFN_IS_IFT_LOOP(ifn) ((ifn)->ifn_type == IFT_LOOP)
214#define SCTP_ROUTE_IS_REAL_LOOP(ro) ((ro)->ro_rt && (ro)->ro_rt->rt_ifa && (ro)->ro_rt->rt_ifa->ifa_ifp && (ro)->ro_rt->rt_ifa->ifa_ifp->if_type == IFT_LOOP)
215
216/*
217 * Access to IFN's to help with src-addr-selection
218 */
219/* This could return VOID if the index works but for BSD we provide both. */
220#define SCTP_GET_IFN_VOID_FROM_ROUTE(ro) (void *)ro->ro_rt->rt_ifp
221#define SCTP_GET_IF_INDEX_FROM_ROUTE(ro) (ro)->ro_rt->rt_ifp->if_index
222#define SCTP_ROUTE_HAS_VALID_IFN(ro) ((ro)->ro_rt && (ro)->ro_rt->rt_ifp)
223
224/*
225 * general memory allocation
226 */
227#define SCTP_MALLOC(var, type, size, name) \
228	do { \
229		var = (type)malloc(size, name, M_NOWAIT); \
230	} while (0)
231
232#define SCTP_FREE(var, type)	free(var, type)
233
234#define SCTP_MALLOC_SONAME(var, type, size) \
235	do { \
236		var = (type)malloc(size, M_SONAME, M_WAITOK | M_ZERO); \
237	} while (0)
238
239#define SCTP_FREE_SONAME(var)	free(var, M_SONAME)
240
241#define SCTP_PROCESS_STRUCT struct proc *
242
243/*
244 * zone allocation functions
245 */
246#include <vm/uma.h>
247
248/* SCTP_ZONE_INIT: initialize the zone */
249typedef struct uma_zone *sctp_zone_t;
250
251#define SCTP_ZONE_INIT(zone, name, size, number) { \
252	zone = uma_zcreate(name, size, NULL, NULL, NULL, NULL, UMA_ALIGN_PTR,\
253		0); \
254	uma_zone_set_max(zone, number); \
255}
256
257#define SCTP_ZONE_DESTROY(zone) uma_zdestroy(zone)
258
259/* SCTP_ZONE_GET: allocate element from the zone */
260#define SCTP_ZONE_GET(zone, type) \
261	(type *)uma_zalloc(zone, M_NOWAIT);
262
263/* SCTP_ZONE_FREE: free element from the zone */
264#define SCTP_ZONE_FREE(zone, element) \
265	uma_zfree(zone, element);
266
267#define SCTP_HASH_INIT(size, hashmark) hashinit_flags(size, M_PCB, hashmark, HASH_NOWAIT)
268#define SCTP_HASH_FREE(table, hashmark) hashdestroy(table, M_PCB, hashmark)
269
270#define SCTP_M_COPYM	m_copym
271
272/*
273 * timers
274 */
275#include <sys/callout.h>
276typedef struct callout sctp_os_timer_t;
277
278
279#define SCTP_OS_TIMER_INIT(tmr)	callout_init(tmr, 1)
280#define SCTP_OS_TIMER_START	callout_reset
281#define SCTP_OS_TIMER_STOP	callout_stop
282#define SCTP_OS_TIMER_STOP_DRAIN callout_drain
283#define SCTP_OS_TIMER_PENDING	callout_pending
284#define SCTP_OS_TIMER_ACTIVE	callout_active
285#define SCTP_OS_TIMER_DEACTIVATE callout_deactivate
286
287#define sctp_get_tick_count() (ticks)
288
289#define SCTP_UNUSED __attribute__((unused))
290
291/*
292 * Functions
293 */
294/* Mbuf manipulation and access macros  */
295#define SCTP_BUF_LEN(m) (m->m_len)
296#define SCTP_BUF_NEXT(m) (m->m_next)
297#define SCTP_BUF_NEXT_PKT(m) (m->m_nextpkt)
298#define SCTP_BUF_RESV_UF(m, size) m->m_data += size
299#define SCTP_BUF_AT(m, size) m->m_data + size
300#define SCTP_BUF_IS_EXTENDED(m) (m->m_flags & M_EXT)
301#define SCTP_BUF_EXTEND_SIZE(m) (m->m_ext.ext_size)
302#define SCTP_BUF_TYPE(m) (m->m_type)
303#define SCTP_BUF_RECVIF(m) (m->m_pkthdr.rcvif)
304#define SCTP_BUF_PREPEND	M_PREPEND
305
306#define SCTP_ALIGN_TO_END(m, len) if(m->m_flags & M_PKTHDR) { \
307                                     MH_ALIGN(m, len); \
308                                  } else if ((m->m_flags & M_EXT) == 0) { \
309                                     M_ALIGN(m, len); \
310                                  }
311
312/* We make it so if you have up to 4 threads
313 * writing based on the default size of
314 * the packet log 65 k, that would be
315 * 4 16k packets before we would hit
316 * a problem.
317 */
318#define SCTP_PKTLOG_WRITERS_NEED_LOCK 3
319
320/*************************/
321/*      MTU              */
322/*************************/
323#define SCTP_GATHER_MTU_FROM_IFN_INFO(ifn, ifn_index, af) ((struct ifnet *)ifn)->if_mtu
324#define SCTP_GATHER_MTU_FROM_ROUTE(sctp_ifa, sa, rt) ((uint32_t)((rt != NULL) ? rt->rt_mtu : 0))
325#define SCTP_GATHER_MTU_FROM_INTFC(sctp_ifn) ((sctp_ifn->ifn_p != NULL) ? ((struct ifnet *)(sctp_ifn->ifn_p))->if_mtu : 0)
326#define SCTP_SET_MTU_OF_ROUTE(sa, rt, mtu) do { \
327                                              if (rt != NULL) \
328                                                 rt->rt_mtu = mtu; \
329                                           } while(0)
330
331/* (de-)register interface event notifications */
332#define SCTP_REGISTER_INTERFACE(ifhandle, af)
333#define SCTP_DEREGISTER_INTERFACE(ifhandle, af)
334
335
336/*************************/
337/* These are for logging */
338/*************************/
339/* return the base ext data pointer */
340#define SCTP_BUF_EXTEND_BASE(m) (m->m_ext.ext_buf)
341 /* return the refcnt of the data pointer */
342#define SCTP_BUF_EXTEND_REFCNT(m) (*m->m_ext.ref_cnt)
343/* return any buffer related flags, this is
344 * used beyond logging for apple only.
345 */
346#define SCTP_BUF_GET_FLAGS(m) (m->m_flags)
347
348/* For BSD this just accesses the M_PKTHDR length
349 * so it operates on an mbuf with hdr flag. Other
350 * O/S's may have separate packet header and mbuf
351 * chain pointers.. thus the macro.
352 */
353#define SCTP_HEADER_TO_CHAIN(m) (m)
354#define SCTP_DETACH_HEADER_FROM_CHAIN(m)
355#define SCTP_HEADER_LEN(m) ((m)->m_pkthdr.len)
356#define SCTP_GET_HEADER_FOR_OUTPUT(o_pak) 0
357#define SCTP_RELEASE_HEADER(m)
358#define SCTP_RELEASE_PKT(m)	sctp_m_freem(m)
359#define SCTP_ENABLE_UDP_CSUM(m) do { \
360					m->m_pkthdr.csum_flags = CSUM_UDP; \
361					m->m_pkthdr.csum_data = offsetof(struct udphdr, uh_sum); \
362				} while (0)
363
364#define SCTP_GET_PKT_VRFID(m, vrf_id)  ((vrf_id = SCTP_DEFAULT_VRFID) != SCTP_DEFAULT_VRFID)
365
366
367
368/* Attach the chain of data into the sendable packet. */
369#define SCTP_ATTACH_CHAIN(pak, m, packet_length) do { \
370                                                 pak = m; \
371                                                 pak->m_pkthdr.len = packet_length; \
372                         } while(0)
373
374/* Other m_pkthdr type things */
375#define SCTP_IS_IT_BROADCAST(dst, m) ((m->m_flags & M_PKTHDR) ? in_broadcast(dst, m->m_pkthdr.rcvif) : 0)
376#define SCTP_IS_IT_LOOPBACK(m) ((m->m_flags & M_PKTHDR) && ((m->m_pkthdr.rcvif == NULL) || (m->m_pkthdr.rcvif->if_type == IFT_LOOP)))
377
378
379/* This converts any input packet header
380 * into the chain of data holders, for BSD
381 * its a NOP.
382 */
383
384/* get the v6 hop limit */
385#define SCTP_GET_HLIM(inp, ro)	in6_selecthlim((struct in6pcb *)&inp->ip_inp.inp, (ro ? (ro->ro_rt ? (ro->ro_rt->rt_ifp) : (NULL)) : (NULL)));
386
387/* is the endpoint v6only? */
388#define SCTP_IPV6_V6ONLY(inp)	(((struct inpcb *)inp)->inp_flags & IN6P_IPV6_V6ONLY)
389/* is the socket non-blocking? */
390#define SCTP_SO_IS_NBIO(so)	((so)->so_state & SS_NBIO)
391#define SCTP_SET_SO_NBIO(so)	((so)->so_state |= SS_NBIO)
392#define SCTP_CLEAR_SO_NBIO(so)	((so)->so_state &= ~SS_NBIO)
393/* get the socket type */
394#define SCTP_SO_TYPE(so)	((so)->so_type)
395/* reserve sb space for a socket */
396#define SCTP_SORESERVE(so, send, recv)	soreserve(so, send, recv)
397/* wakeup a socket */
398#define SCTP_SOWAKEUP(so)	wakeup(&(so)->so_timeo)
399/* clear the socket buffer state */
400#define SCTP_SB_CLEAR(sb)	\
401	(sb).sb_cc = 0;		\
402	(sb).sb_mb = NULL;	\
403	(sb).sb_mbcnt = 0;
404
405#define SCTP_SB_LIMIT_RCV(so) so->so_rcv.sb_hiwat
406#define SCTP_SB_LIMIT_SND(so) so->so_snd.sb_hiwat
407
408/*
409 * routes, output, etc.
410 */
411typedef struct route sctp_route_t;
412typedef struct rtentry sctp_rtentry_t;
413
414#define SCTP_RTALLOC(ro, vrf_id, fibnum) \
415	rtalloc_ign_fib((struct route *)ro, 0UL, fibnum)
416
417/* Future zero copy wakeup/send  function */
418#define SCTP_ZERO_COPY_EVENT(inp, so)
419/* This is re-pulse ourselves for sendbuf */
420#define SCTP_ZERO_COPY_SENDQ_EVENT(inp, so)
421
422/*
423 * SCTP protocol specific mbuf flags.
424 */
425#define	M_NOTIFICATION		M_PROTO1	/* SCTP notification */
426
427/*
428 * IP output routines
429 */
430#define SCTP_IP_OUTPUT(result, o_pak, ro, stcb, vrf_id) \
431{ \
432	int o_flgs = IP_RAWOUTPUT; \
433	struct sctp_tcb *local_stcb = stcb; \
434	if (local_stcb && \
435	    local_stcb->sctp_ep && \
436	    local_stcb->sctp_ep->sctp_socket) \
437		o_flgs |= local_stcb->sctp_ep->sctp_socket->so_options & SO_DONTROUTE; \
438	m_clrprotoflags(o_pak); \
439	result = ip_output(o_pak, NULL, ro, o_flgs, 0, NULL); \
440}
441
442#define SCTP_IP6_OUTPUT(result, o_pak, ro, ifp, stcb, vrf_id) \
443{ \
444	struct sctp_tcb *local_stcb = stcb; \
445	m_clrprotoflags(o_pak); \
446	if (local_stcb && local_stcb->sctp_ep) \
447		result = ip6_output(o_pak, \
448				    ((struct in6pcb *)(local_stcb->sctp_ep))->in6p_outputopts, \
449				    (ro), 0, 0, ifp, NULL); \
450	else \
451		result = ip6_output(o_pak, NULL, (ro), 0, 0, ifp, NULL); \
452}
453
454struct mbuf *
455sctp_get_mbuf_for_msg(unsigned int space_needed,
456    int want_header, int how, int allonebuf, int type);
457
458
459/*
460 * SCTP AUTH
461 */
462#define SCTP_READ_RANDOM(buf, len)	read_random(buf, len)
463
464/* map standard crypto API names */
465#define SCTP_SHA1_CTX		SHA1_CTX
466#define SCTP_SHA1_INIT		SHA1Init
467#define SCTP_SHA1_UPDATE	SHA1Update
468#define SCTP_SHA1_FINAL(x,y)	SHA1Final((caddr_t)x, y)
469
470#define SCTP_SHA256_CTX		SHA256_CTX
471#define SCTP_SHA256_INIT	SHA256_Init
472#define SCTP_SHA256_UPDATE	SHA256_Update
473#define SCTP_SHA256_FINAL(x,y)	SHA256_Final((caddr_t)x, y)
474
475#endif
476
477#define SCTP_DECREMENT_AND_CHECK_REFCOUNT(addr) (atomic_fetchadd_int(addr, -1) == 1)
478#if defined(INVARIANTS)
479#define SCTP_SAVE_ATOMIC_DECREMENT(addr, val) \
480{ \
481	int32_t oldval; \
482	oldval = atomic_fetchadd_int(addr, -val); \
483	if (oldval < val) { \
484		panic("Counter goes negative"); \
485	} \
486}
487#else
488#define SCTP_SAVE_ATOMIC_DECREMENT(addr, val) \
489{ \
490	int32_t oldval; \
491	oldval = atomic_fetchadd_int(addr, -val); \
492	if (oldval < val) { \
493		*addr = 0; \
494	} \
495}
496#endif
497