WZR-300HP revision 266331 
1#
2# Specific board setup for the Buffalo Airstation WZR-300HP
3#
4# The WZR-300HP has the following hardware:
5#
6# + AR7242 CPU SoC
7# + AR9280 5GHz 11n
8# + AR8136 Gigabit switch
9# + 2 m25ll128 based 16MB flash
10# + 64MB RAM
11# + uboot environment
12
13# $FreeBSD: stable/10/sys/mips/conf/WZR-300HP 266331 2014-05-17 17:34:37Z ian $
14
15include		"AR724X_BASE"
16ident		"WZR-300HP"
17hints		"WZR-300HP.hints"
18
19options 	AR71XX_REALMEM=64*1024*1024
20
21options 	AR71XX_ENV_UBOOT
22
23options 	BOOTVERBOSE
24# Don't include the SCSI/CAM strings in the default build
25options 	SCSI_NO_SENSE_STRINGS
26options 	SCSI_NO_OP_STRINGS
27
28# .. And no sysctl strings
29options 	NO_SYSCTL_DESCR
30
31# GEOM modules
32device		geom_map	# to get access to the SPI flash partitions
33device		geom_uncompress	# compressed in-memory filesystem hackery!
34
35options 	ROOTDEVNAME=\"ufs:/dev/map/rootfs.uncompress\"
36
37# options 	MD_ROOT
38# options 	MD_ROOT_SIZE="6144"
39
40options 	AR71XX_ATH_EEPROM	# Fetch EEPROM/PCI config from flash
41options 	ATH_EEPROM_FIRMWARE	# Use EEPROM from flash
42device		firmware		# Used by the above
43
44# Options required for miiproxy and mdiobus
45options         ARGE_MDIO               # Export an MDIO bus separate from arge
46device          miiproxy                # MDIO bus <-> MII PHY rendezvous
47
48device          etherswitch
49device          arswitch
50
51# Enable GPIO
52device         gpio
53device         gpioled
54
55# hwpmc
56device		hwpmc_mips24k
57device		hwpmc
58