sun4i-a10-olinuxino-lime.dts revision 284090
1/* 2 * Copyright 2014 - Hans de Goede <hdegoede@redhat.com> 3 * 4 * This file is dual-licensed: you can use it either under the terms 5 * of the GPL or the X11 license, at your option. Note that this dual 6 * licensing only applies to this file, and not this project as a 7 * whole. 8 * 9 * a) This file is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of the 12 * License, or (at your option) any later version. 13 * 14 * This file is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public 20 * License along with this file; if not, write to the Free 21 * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, 22 * MA 02110-1301 USA 23 * 24 * Or, alternatively, 25 * 26 * b) Permission is hereby granted, free of charge, to any person 27 * obtaining a copy of this software and associated documentation 28 * files (the "Software"), to deal in the Software without 29 * restriction, including without limitation the rights to use, 30 * copy, modify, merge, publish, distribute, sublicense, and/or 31 * sell copies of the Software, and to permit persons to whom the 32 * Software is furnished to do so, subject to the following 33 * conditions: 34 * 35 * The above copyright notice and this permission notice shall be 36 * included in all copies or substantial portions of the Software. 37 * 38 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 39 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 40 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 41 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 42 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 43 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 44 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 45 * OTHER DEALINGS IN THE SOFTWARE. 46 */ 47 48/dts-v1/; 49#include "sun4i-a10.dtsi" 50#include "sunxi-common-regulators.dtsi" 51 52#include <dt-bindings/gpio/gpio.h> 53#include <dt-bindings/pinctrl/sun4i-a10.h> 54 55/ { 56 model = "Olimex A10-OLinuXino-LIME"; 57 compatible = "olimex,a10-olinuxino-lime", "allwinner,sun4i-a10"; 58 59 soc@01c00000 { 60 emac: ethernet@01c0b000 { 61 pinctrl-names = "default"; 62 pinctrl-0 = <&emac_pins_a>; 63 phy = <&phy1>; 64 status = "okay"; 65 }; 66 67 mdio@01c0b080 { 68 status = "okay"; 69 70 phy1: ethernet-phy@1 { 71 reg = <1>; 72 }; 73 }; 74 75 mmc0: mmc@01c0f000 { 76 pinctrl-names = "default"; 77 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; 78 vmmc-supply = <®_vcc3v3>; 79 bus-width = <4>; 80 cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ 81 cd-inverted; 82 status = "okay"; 83 }; 84 85 usbphy: phy@01c13400 { 86 usb1_vbus-supply = <®_usb1_vbus>; 87 usb2_vbus-supply = <®_usb2_vbus>; 88 status = "okay"; 89 }; 90 91 ehci0: usb@01c14000 { 92 status = "okay"; 93 }; 94 95 ohci0: usb@01c14400 { 96 status = "okay"; 97 }; 98 99 ahci: sata@01c18000 { 100 target-supply = <®_ahci_5v>; 101 status = "okay"; 102 }; 103 104 ehci1: usb@01c1c000 { 105 status = "okay"; 106 }; 107 108 ohci1: usb@01c1c400 { 109 status = "okay"; 110 }; 111 112 pinctrl@01c20800 { 113 ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { 114 allwinner,pins = "PC3"; 115 allwinner,function = "gpio_out"; 116 allwinner,drive = <SUN4I_PINCTRL_10_MA>; 117 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; 118 }; 119 120 led_pins_olinuxinolime: led_pins@0 { 121 allwinner,pins = "PH2"; 122 allwinner,function = "gpio_out"; 123 allwinner,drive = <SUN4I_PINCTRL_20_MA>; 124 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; 125 }; 126 }; 127 128 uart0: serial@01c28000 { 129 pinctrl-names = "default"; 130 pinctrl-0 = <&uart0_pins_a>; 131 status = "okay"; 132 }; 133 134 i2c0: i2c@01c2ac00 { 135 pinctrl-names = "default"; 136 pinctrl-0 = <&i2c0_pins_a>; 137 status = "okay"; 138 139 axp209: pmic@34 { 140 compatible = "x-powers,axp209"; 141 reg = <0x34>; 142 interrupts = <0>; 143 144 interrupt-controller; 145 #interrupt-cells = <1>; 146 }; 147 }; 148 }; 149 150 leds { 151 compatible = "gpio-leds"; 152 pinctrl-names = "default"; 153 pinctrl-0 = <&led_pins_olinuxinolime>; 154 155 green { 156 label = "a10-olinuxino-lime:green:usr"; 157 gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; 158 default-state = "on"; 159 }; 160 }; 161 162 reg_ahci_5v: ahci-5v { 163 pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>; 164 gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>; 165 status = "okay"; 166 }; 167 168 reg_usb1_vbus: usb1-vbus { 169 status = "okay"; 170 }; 171 172 reg_usb2_vbus: usb2-vbus { 173 status = "okay"; 174 }; 175}; 176