kirkwood-sheevaplug-common.dtsi revision 284090 
1/*
2 * kirkwood-sheevaplug-common.dtsi - Common parts for Sheevaplugs
3 *
4 * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com>
5 *
6 * Licensed under GPLv2
7 */
8
9#include "kirkwood.dtsi"
10#include "kirkwood-6281.dtsi"
11
12/ {
13	memory {
14		device_type = "memory";
15		reg = <0x00000000 0x20000000>;
16	};
17
18	chosen {
19		bootargs = "console=ttyS0,115200n8 earlyprintk";
20		stdout-path = &uart0;
21	};
22
23	ocp@f1000000 {
24		pinctrl: pin-controller@10000 {
25
26			pmx_usb_power_enable: pmx-usb-power-enable {
27				marvell,pins = "mpp29";
28				marvell,function = "gpio";
29			};
30			pmx_led_red: pmx-led-red {
31				marvell,pins = "mpp46";
32				marvell,function = "gpio";
33			};
34			pmx_led_blue: pmx-led-blue {
35				marvell,pins = "mpp49";
36				marvell,function = "gpio";
37			};
38			pmx_sdio_cd: pmx-sdio-cd {
39				marvell,pins = "mpp44";
40				marvell,function = "gpio";
41			};
42			pmx_sdio_wp: pmx-sdio-wp {
43				marvell,pins = "mpp47";
44				marvell,function = "gpio";
45			};
46		};
47		serial@12000 {
48			status = "okay";
49		};
50	};
51
52	regulators {
53		compatible = "simple-bus";
54		#address-cells = <1>;
55		#size-cells = <0>;
56		pinctrl-0 = <&pmx_usb_power_enable>;
57		pinctrl-names = "default";
58
59		usb_power: regulator@1 {
60			compatible = "regulator-fixed";
61			reg = <1>;
62			regulator-name = "USB Power";
63			regulator-min-microvolt = <5000000>;
64			regulator-max-microvolt = <5000000>;
65			enable-active-high;
66			regulator-always-on;
67			regulator-boot-on;
68			gpio = <&gpio0 29 0>;
69		};
70	};
71};
72
73&nand {
74	status = "okay";
75
76	partition@0 {
77		label = "u-boot";
78		reg = <0x0000000 0x100000>;
79	};
80
81	partition@100000 {
82		label = "uImage";
83		reg = <0x0100000 0x400000>;
84	};
85
86	partition@500000 {
87		label = "root";
88		reg = <0x0500000 0x1fb00000>;
89	};
90};
91
92&mdio {
93	status = "okay";
94
95	ethphy0: ethernet-phy@0 {
96		reg = <0>;
97	};
98};
99
100&eth0 {
101	status = "okay";
102	ethernet0-port@0 {
103		phy-handle = <&ethphy0>;
104	};
105};
106