kirkwood-rd88f6281.dtsi revision 284090 
1/*
2 * Marvell RD88F6181 Common Board descrition
3 *
4 * Andrew Lunn <andrew@lunn.ch>
5 *
6 * This file is licensed under the terms of the GNU General Public
7 * License version 2.  This program is licensed "as is" without any
8 * warranty of any kind, whether express or implied.
9 *
10 * This file contains the definitions that are common between the two
11 * variants of the Marvell Kirkwood Development Board.
12 */
13
14#include "kirkwood.dtsi"
15#include "kirkwood-6281.dtsi"
16
17/ {
18	memory {
19		device_type = "memory";
20		reg = <0x00000000 0x20000000>;
21	};
22
23	chosen {
24		bootargs = "console=ttyS0,115200n8";
25		stdout-path = &uart0;
26	};
27
28	mbus {
29		pcie-controller {
30			status = "okay";
31
32			pcie@1,0 {
33				status = "okay";
34			};
35		};
36	};
37
38	ocp@f1000000 {
39		pinctrl: pin-controller@10000 {
40			pinctrl-names = "default";
41
42			pmx_sdio_cd: pmx-sdio-cd {
43				marvell,pins = "mpp28";
44				marvell,function = "gpio";
45			};
46		};
47
48		serial@12000 {
49			status = "okay";
50
51		};
52
53		sata@80000 {
54			status = "okay";
55			nr-ports = <2>;
56		};
57		mvsdio@90000 {
58			pinctrl-0 = <&pmx_sdio &pmx_sdio_cd>;
59			pinctrl-names = "default";
60			status = "okay";
61			cd-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
62			/* No WP GPIO */
63		};
64	};
65
66	dsa@0 {
67		compatible = "marvell,dsa";
68		#address-cells = <2>;
69		#size-cells = <0>;
70
71		dsa,ethernet = <&eth0port>;
72		dsa,mii-bus = <&mdio>;
73
74		switch@0 {
75			#address-cells = <1>;
76			#size-cells = <0>;
77
78			port@0 {
79				reg = <0>;
80				label = "lan1";
81			};
82
83			port@1 {
84				reg = <1>;
85				label = "lan2";
86			};
87
88			port@2 {
89				reg = <2>;
90				label = "lan3";
91			};
92
93			port@3 {
94				reg = <3>;
95				label = "lan4";
96			};
97
98			port@5 {
99				reg = <5>;
100				label = "cpu";
101			};
102		};
103       };
104};
105
106&nand {
107	status = "okay";
108
109	partition@0 {
110		label = "u-boot";
111		reg = <0x0000000 0x100000>;
112		read-only;
113	};
114
115	partition@100000 {
116		label = "uImage";
117		reg = <0x0100000 0x200000>;
118	};
119
120	partition@300000 {
121		label = "rootfs";
122		reg = <0x0300000 0x500000>;
123	};
124};
125
126&mdio {
127	status = "okay";
128};
129
130&eth0 {
131	status = "okay";
132	ethernet0-port@0 {
133		speed = <1000>;
134		duplex = <1>;
135	};
136};
137