kirkwood-net5big.dts revision 284090 
1/*
2 * Device Tree file for LaCie 5Big Network v2
3 *
4 * Copyright (C) 2014
5 *
6 * Andrew Lunn <andrew@lunn.ch>
7 *
8 * Based on netxbig_v2-setup.c,
9 * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
10 *
11 * This file is licensed under the terms of the GNU General Public
12 * License version 2.  This program is licensed "as is" without any
13 * warranty of any kind, whether express or implied.
14*/
15
16/dts-v1/;
17
18#include "kirkwood.dtsi"
19#include "kirkwood-6281.dtsi"
20#include "kirkwood-netxbig.dtsi"
21
22/ {
23	model = "LaCie 5Big Network v2";
24	compatible = "lacie,net5big_v2", "lacie,netxbig", "marvell,kirkwood-88f6281", "marvell,kirkwood";
25
26	memory {
27		device_type = "memory";
28		reg = <0x00000000 0x20000000>;
29	};
30
31};
32
33&regulators {
34	regulator@2 {
35		compatible = "regulator-fixed";
36		reg = <2>;
37		regulator-name = "hdd1power";
38		regulator-min-microvolt = <5000000>;
39		regulator-max-microvolt = <5000000>;
40		enable-active-high;
41		regulator-always-on;
42		regulator-boot-on;
43		gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>;
44	};
45
46	regulator@3 {
47		compatible = "regulator-fixed";
48		reg = <3>;
49		regulator-name = "hdd2power";
50		regulator-min-microvolt = <5000000>;
51		regulator-max-microvolt = <5000000>;
52		enable-active-high;
53		regulator-always-on;
54		regulator-boot-on;
55		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
56	};
57
58	regulator@4 {
59		compatible = "regulator-fixed";
60		reg = <4>;
61		regulator-name = "hdd3power";
62		regulator-min-microvolt = <5000000>;
63		regulator-max-microvolt = <5000000>;
64		enable-active-high;
65		regulator-always-on;
66		regulator-boot-on;
67		gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
68	};
69
70	regulator@5 {
71		compatible = "regulator-fixed";
72		reg = <5>;
73		regulator-name = "hdd4power";
74		regulator-min-microvolt = <5000000>;
75		regulator-max-microvolt = <5000000>;
76		enable-active-high;
77		regulator-always-on;
78		regulator-boot-on;
79		gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
80	};
81
82	clocks {
83	       g762_clk: g762-oscillator {
84			 compatible = "fixed-clock";
85			 #clock-cells = <0>;
86			 clock-frequency = <32768>;
87	       };
88	};
89};
90
91&mdio {
92	ethphy1: ethernet-phy@1 {
93		reg = <0>;
94	};
95};
96
97&eth1 {
98	status = "okay";
99	ethernet1-port@0 {
100		phy-handle = <&ethphy1>;
101	};
102};
103
104
105&i2c0 {
106	g762@3e {
107		compatible = "gmt,g762";
108		reg = <0x3e>;
109		clocks = <&g762_clk>;
110	};
111};
112