kirkwood-iomega_ix2_200.dts revision 284090 
1/dts-v1/;
2
3#include "kirkwood.dtsi"
4#include "kirkwood-6281.dtsi"
5
6/ {
7	model = "Iomega StorCenter ix2-200";
8	compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
9
10	memory {
11		device_type = "memory";
12		reg = <0x00000000 0x10000000>;
13	};
14
15	chosen {
16		bootargs = "console=ttyS0,115200n8 earlyprintk";
17		stdout-path = &uart0;
18	};
19
20	ocp@f1000000 {
21		pinctrl: pin-controller@10000 {
22			pinctrl-0 = < &pmx_led_sata_brt_ctrl_1
23				      &pmx_led_sata_brt_ctrl_2
24				      &pmx_led_backup_brt_ctrl_1
25				      &pmx_led_backup_brt_ctrl_2
26				      &pmx_led_power_brt_ctrl_1
27				      &pmx_led_power_brt_ctrl_2
28				      &pmx_led_health_brt_ctrl_1
29				      &pmx_led_health_brt_ctrl_2
30				      &pmx_led_rebuild_brt_ctrl_1
31				      &pmx_led_rebuild_brt_ctrl_2 >;
32			pinctrl-names = "default";
33
34			pmx_button_reset: pmx-button-reset {
35				marvell,pins = "mpp12";
36				marvell,function = "gpio";
37			};
38			pmx_button_power: pmx-button-power {
39				marvell,pins = "mpp14";
40				marvell,function = "gpio";
41			};
42			pmx_led_backup: pmx-led-backup {
43				marvell,pins = "mpp15";
44				marvell,function = "gpio";
45			};
46			pmx_led_power: pmx-led-power {
47				marvell,pins = "mpp16";
48				marvell,function = "gpio";
49			};
50			pmx_button_otb: pmx-button-otb {
51				marvell,pins = "mpp35";
52				marvell,function = "gpio";
53			};
54			pmx_led_rebuild: pmx-led-rebuild {
55				marvell,pins = "mpp36";
56				marvell,function = "gpio";
57			};
58			pmx_led_health: pmx-led_health {
59				marvell,pins = "mpp37";
60				marvell,function = "gpio";
61			};
62			pmx_led_sata_brt_ctrl_1: pmx-led-sata-brt-ctrl-1 {
63				marvell,pins = "mpp38";
64				marvell,function = "gpio";
65			};
66			pmx_led_sata_brt_ctrl_2: pmx-led-sata-brt-ctrl-2 {
67				marvell,pins = "mpp39";
68				marvell,function = "gpio";
69			};
70			pmx_led_backup_brt_ctrl_1: pmx-led-backup-brt-ctrl-1 {
71				marvell,pins = "mpp40";
72				marvell,function = "gpio";
73			};
74			pmx_led_backup_brt_ctrl_2: pmx-led-backup-brt-ctrl-2 {
75				marvell,pins = "mpp41";
76				marvell,function = "gpio";
77			};
78			pmx_led_power_brt_ctrl_1: pmx-led-power-brt-ctrl-1 {
79				marvell,pins = "mpp42";
80				marvell,function = "gpio";
81			};
82			pmx_led_power_brt_ctrl_2: pmx-led-power-brt-ctrl-2 {
83				marvell,pins = "mpp43";
84				marvell,function = "gpio";
85			};
86			pmx_led_health_brt_ctrl_1: pmx-led-health-brt-ctrl-1 {
87				marvell,pins = "mpp44";
88				marvell,function = "gpio";
89			};
90			pmx_led_health_brt_ctrl_2: pmx-led-health-brt-ctrl-2 {
91				marvell,pins = "mpp45";
92				marvell,function = "gpio";
93			};
94			pmx_led_rebuild_brt_ctrl_1: pmx-led-rebuild-brt-ctrl-1 {
95				marvell,pins = "mpp46";
96				marvell,function = "gpio";
97			};
98			pmx_led_rebuild_brt_ctrl_2: pmx-led-rebuild-brt-ctrl-2 {
99				marvell,pins = "mpp47";
100				marvell,function = "gpio";
101			};
102
103		};
104		i2c@11000 {
105			status = "okay";
106
107			lm63: lm63@4c {
108				compatible = "national,lm63";
109				reg = <0x4c>;
110			};
111		};
112
113		serial@12000 {
114			status = "ok";
115		};
116
117		sata@80000 {
118			status = "okay";
119			nr-ports = <2>;
120		};
121
122	};
123	gpio-leds {
124		compatible = "gpio-leds";
125		pinctrl-0 = < &pmx_led_backup &pmx_led_power
126			      &pmx_led_rebuild &pmx_led_health >;
127		pinctrl-names = "default";
128
129		power_led {
130			label = "status:white:power_led";
131			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
132			default-state = "keep";
133		};
134		rebuild_led {
135			label = "status:white:rebuild_led";
136			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
137		};
138		health_led {
139			label = "status:red:health_led";
140			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
141		};
142		backup_led {
143			label = "status:blue:backup_led";
144			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
145		};
146	};
147	gpio-keys {
148		compatible = "gpio-keys";
149		#address-cells = <1>;
150		#size-cells = <0>;
151		pinctrl-0 = <&pmx_button_reset &pmx_button_power
152			     &pmx_button_otb>;
153		pinctrl-names = "default";
154
155
156		Power {
157			label = "Power Button";
158			linux,code = <KEY_POWER>;
159			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
160		};
161		Reset {
162			label = "Reset Button";
163			linux,code = <KEY_RESTART>;
164			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
165		};
166		OTB {
167			label = "OTB Button";
168			linux,code = <KEY_COPY>;
169			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
170		};
171	};
172	gpio-poweroff {
173		compatible = "gpio-poweroff";
174		gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
175	};
176};
177
178&nand {
179	status = "okay";
180
181	partition@0 {
182		label = "u-boot";
183		reg = <0x0000000 0x100000>;
184		read-only;
185	};
186
187	partition@a0000 {
188		label = "env";
189		reg = <0xa0000 0x20000>;
190		read-only;
191	};
192
193	partition@100000 {
194		label = "uImage";
195		reg = <0x100000 0x300000>;
196	};
197
198	partition@400000 {
199		label = "rootfs";
200		reg = <0x400000 0x1C00000>;
201	};
202};
203
204&mdio {
205	status = "okay";
206
207	ethphy1: ethernet-phy@11 {
208		reg = <11>;
209	};
210};
211
212&eth0 {
213	status = "okay";
214	ethernet0-port@0 {
215		speed = <1000>;
216		duplex = <1>;
217	};
218};
219
220&eth1 {
221	status = "okay";
222	ethernet1-port@0 {
223		phy-handle = <&ethphy1>;
224	};
225};
226