imx51-babbage.dts revision 284090
1/* 2 * Copyright 2011 Freescale Semiconductor, Inc. 3 * Copyright 2011 Linaro Ltd. 4 * 5 * The code contained herein is licensed under the GNU General Public 6 * License. You may obtain a copy of the GNU General Public License 7 * Version 2 or later at the following locations: 8 * 9 * http://www.opensource.org/licenses/gpl-license.html 10 * http://www.gnu.org/copyleft/gpl.html 11 */ 12 13/dts-v1/; 14#include "imx51.dtsi" 15 16/ { 17 model = "Freescale i.MX51 Babbage Board"; 18 compatible = "fsl,imx51-babbage", "fsl,imx51"; 19 20 chosen { 21 stdout-path = &uart1; 22 }; 23 24 memory { 25 reg = <0x90000000 0x20000000>; 26 }; 27 28 clocks { 29 ckih1 { 30 clock-frequency = <22579200>; 31 }; 32 33 clk_26M: codec_clock { 34 compatible = "fixed-clock"; 35 reg=<0>; 36 #clock-cells = <0>; 37 clock-frequency = <26000000>; 38 gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; 39 }; 40 }; 41 42 display0: display@di0 { 43 compatible = "fsl,imx-parallel-display"; 44 interface-pix-fmt = "rgb24"; 45 pinctrl-names = "default"; 46 pinctrl-0 = <&pinctrl_ipu_disp1>; 47 display-timings { 48 native-mode = <&timing0>; 49 timing0: dvi { 50 clock-frequency = <65000000>; 51 hactive = <1024>; 52 vactive = <768>; 53 hback-porch = <220>; 54 hfront-porch = <40>; 55 vback-porch = <21>; 56 vfront-porch = <7>; 57 hsync-len = <60>; 58 vsync-len = <10>; 59 }; 60 }; 61 62 port { 63 display0_in: endpoint { 64 remote-endpoint = <&ipu_di0_disp0>; 65 }; 66 }; 67 }; 68 69 display1: display@di1 { 70 compatible = "fsl,imx-parallel-display"; 71 interface-pix-fmt = "rgb565"; 72 pinctrl-names = "default"; 73 pinctrl-0 = <&pinctrl_ipu_disp2>; 74 status = "disabled"; 75 display-timings { 76 native-mode = <&timing1>; 77 timing1: claawvga { 78 clock-frequency = <27000000>; 79 hactive = <800>; 80 vactive = <480>; 81 hback-porch = <40>; 82 hfront-porch = <60>; 83 vback-porch = <10>; 84 vfront-porch = <10>; 85 hsync-len = <20>; 86 vsync-len = <10>; 87 hsync-active = <0>; 88 vsync-active = <0>; 89 de-active = <1>; 90 pixelclk-active = <0>; 91 }; 92 }; 93 94 port { 95 display1_in: endpoint { 96 remote-endpoint = <&ipu_di1_disp1>; 97 }; 98 }; 99 }; 100 101 gpio-keys { 102 compatible = "gpio-keys"; 103 pinctrl-names = "default"; 104 pinctrl-0 = <&pinctrl_gpio_keys>; 105 106 power { 107 label = "Power Button"; 108 gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; 109 linux,code = <KEY_POWER>; 110 gpio-key,wakeup; 111 }; 112 }; 113 114 leds { 115 compatible = "gpio-leds"; 116 pinctrl-names = "default"; 117 pinctrl-0 = <&pinctrl_gpio_leds>; 118 119 led-diagnostic { 120 label = "diagnostic"; 121 gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>; 122 }; 123 }; 124 125 regulators { 126 compatible = "simple-bus"; 127 #address-cells = <1>; 128 #size-cells = <0>; 129 130 reg_hub_reset: regulator@0 { 131 compatible = "regulator-fixed"; 132 pinctrl-names = "default"; 133 pinctrl-0 = <&pinctrl_usbotgreg>; 134 reg = <0>; 135 regulator-name = "hub_reset"; 136 regulator-min-microvolt = <5000000>; 137 regulator-max-microvolt = <5000000>; 138 gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; 139 enable-active-high; 140 }; 141 }; 142 143 sound { 144 compatible = "fsl,imx51-babbage-sgtl5000", 145 "fsl,imx-audio-sgtl5000"; 146 model = "imx51-babbage-sgtl5000"; 147 ssi-controller = <&ssi2>; 148 audio-codec = <&sgtl5000>; 149 audio-routing = 150 "MIC_IN", "Mic Jack", 151 "Mic Jack", "Mic Bias", 152 "Headphone Jack", "HP_OUT"; 153 mux-int-port = <2>; 154 mux-ext-port = <3>; 155 }; 156 157 usbphy { 158 #address-cells = <1>; 159 #size-cells = <0>; 160 compatible = "simple-bus"; 161 162 usbh1phy: usbh1phy@0 { 163 compatible = "usb-nop-xceiv"; 164 reg = <0>; 165 clocks = <&clks IMX5_CLK_DUMMY>; 166 clock-names = "main_clk"; 167 reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; 168 }; 169 }; 170}; 171 172&audmux { 173 pinctrl-names = "default"; 174 pinctrl-0 = <&pinctrl_audmux>; 175 status = "okay"; 176}; 177 178&ecspi1 { 179 pinctrl-names = "default"; 180 pinctrl-0 = <&pinctrl_ecspi1>; 181 fsl,spi-num-chipselects = <2>; 182 cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>, 183 <&gpio4 25 GPIO_ACTIVE_LOW>; 184 status = "okay"; 185 186 pmic: mc13892@0 { 187 compatible = "fsl,mc13892"; 188 pinctrl-names = "default"; 189 pinctrl-0 = <&pinctrl_pmic>; 190 spi-max-frequency = <6000000>; 191 spi-cs-high; 192 reg = <0>; 193 interrupt-parent = <&gpio1>; 194 interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; 195 fsl,mc13xxx-uses-rtc; 196 197 regulators { 198 sw1_reg: sw1 { 199 regulator-min-microvolt = <600000>; 200 regulator-max-microvolt = <1375000>; 201 regulator-boot-on; 202 regulator-always-on; 203 }; 204 205 sw2_reg: sw2 { 206 regulator-min-microvolt = <900000>; 207 regulator-max-microvolt = <1850000>; 208 regulator-boot-on; 209 regulator-always-on; 210 }; 211 212 sw3_reg: sw3 { 213 regulator-min-microvolt = <1100000>; 214 regulator-max-microvolt = <1850000>; 215 regulator-boot-on; 216 regulator-always-on; 217 }; 218 219 sw4_reg: sw4 { 220 regulator-min-microvolt = <1100000>; 221 regulator-max-microvolt = <1850000>; 222 regulator-boot-on; 223 regulator-always-on; 224 }; 225 226 vpll_reg: vpll { 227 regulator-min-microvolt = <1050000>; 228 regulator-max-microvolt = <1800000>; 229 regulator-boot-on; 230 regulator-always-on; 231 }; 232 233 vdig_reg: vdig { 234 regulator-min-microvolt = <1650000>; 235 regulator-max-microvolt = <1650000>; 236 regulator-boot-on; 237 }; 238 239 vsd_reg: vsd { 240 regulator-min-microvolt = <1800000>; 241 regulator-max-microvolt = <3150000>; 242 }; 243 244 vusb2_reg: vusb2 { 245 regulator-min-microvolt = <2400000>; 246 regulator-max-microvolt = <2775000>; 247 regulator-boot-on; 248 regulator-always-on; 249 }; 250 251 vvideo_reg: vvideo { 252 regulator-min-microvolt = <2775000>; 253 regulator-max-microvolt = <2775000>; 254 }; 255 256 vaudio_reg: vaudio { 257 regulator-min-microvolt = <2300000>; 258 regulator-max-microvolt = <3000000>; 259 }; 260 261 vcam_reg: vcam { 262 regulator-min-microvolt = <2500000>; 263 regulator-max-microvolt = <3000000>; 264 }; 265 266 vgen1_reg: vgen1 { 267 regulator-min-microvolt = <1200000>; 268 regulator-max-microvolt = <1200000>; 269 }; 270 271 vgen2_reg: vgen2 { 272 regulator-min-microvolt = <1200000>; 273 regulator-max-microvolt = <3150000>; 274 regulator-always-on; 275 }; 276 277 vgen3_reg: vgen3 { 278 regulator-min-microvolt = <1800000>; 279 regulator-max-microvolt = <2900000>; 280 regulator-always-on; 281 }; 282 }; 283 }; 284 285 flash: at45db321d@1 { 286 #address-cells = <1>; 287 #size-cells = <1>; 288 compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash"; 289 spi-max-frequency = <25000000>; 290 reg = <1>; 291 292 partition@0 { 293 label = "U-Boot"; 294 reg = <0x0 0x40000>; 295 read-only; 296 }; 297 298 partition@40000 { 299 label = "Kernel"; 300 reg = <0x40000 0x3c0000>; 301 }; 302 }; 303}; 304 305&esdhc1 { 306 pinctrl-names = "default"; 307 pinctrl-0 = <&pinctrl_esdhc1>; 308 cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; 309 wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; 310 status = "okay"; 311}; 312 313&esdhc2 { 314 pinctrl-names = "default"; 315 pinctrl-0 = <&pinctrl_esdhc2>; 316 cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; 317 wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; 318 status = "okay"; 319}; 320 321&fec { 322 pinctrl-names = "default"; 323 pinctrl-0 = <&pinctrl_fec>; 324 phy-mode = "mii"; 325 phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; 326 phy-reset-duration = <1>; 327 status = "okay"; 328}; 329 330&i2c1 { 331 pinctrl-names = "default"; 332 pinctrl-0 = <&pinctrl_i2c1>; 333 status = "okay"; 334}; 335 336&i2c2 { 337 pinctrl-names = "default"; 338 pinctrl-0 = <&pinctrl_i2c2>; 339 status = "okay"; 340 341 sgtl5000: codec@0a { 342 compatible = "fsl,sgtl5000"; 343 pinctrl-names = "default"; 344 pinctrl-0 = <&pinctrl_clkcodec>; 345 reg = <0x0a>; 346 clocks = <&clk_26M>; 347 VDDA-supply = <&vdig_reg>; 348 VDDIO-supply = <&vvideo_reg>; 349 }; 350}; 351 352&ipu_di0_disp0 { 353 remote-endpoint = <&display0_in>; 354}; 355 356&ipu_di1_disp1 { 357 remote-endpoint = <&display1_in>; 358}; 359 360&kpp { 361 pinctrl-names = "default"; 362 pinctrl-0 = <&pinctrl_kpp>; 363 linux,keymap = < 364 MATRIX_KEY(0, 0, KEY_UP) 365 MATRIX_KEY(0, 1, KEY_DOWN) 366 MATRIX_KEY(0, 2, KEY_VOLUMEDOWN) 367 MATRIX_KEY(0, 3, KEY_HOME) 368 MATRIX_KEY(1, 0, KEY_RIGHT) 369 MATRIX_KEY(1, 1, KEY_LEFT) 370 MATRIX_KEY(1, 2, KEY_ENTER) 371 MATRIX_KEY(1, 3, KEY_VOLUMEUP) 372 MATRIX_KEY(2, 0, KEY_F6) 373 MATRIX_KEY(2, 1, KEY_F8) 374 MATRIX_KEY(2, 2, KEY_F9) 375 MATRIX_KEY(2, 3, KEY_F10) 376 MATRIX_KEY(3, 0, KEY_F1) 377 MATRIX_KEY(3, 1, KEY_F2) 378 MATRIX_KEY(3, 2, KEY_F3) 379 MATRIX_KEY(3, 3, KEY_POWER) 380 >; 381 status = "okay"; 382}; 383 384&ssi2 { 385 status = "okay"; 386}; 387 388&uart1 { 389 pinctrl-names = "default"; 390 pinctrl-0 = <&pinctrl_uart1>; 391 fsl,uart-has-rtscts; 392 status = "okay"; 393}; 394 395&uart2 { 396 pinctrl-names = "default"; 397 pinctrl-0 = <&pinctrl_uart2>; 398 status = "okay"; 399}; 400 401&uart3 { 402 pinctrl-names = "default"; 403 pinctrl-0 = <&pinctrl_uart3>; 404 fsl,uart-has-rtscts; 405 status = "okay"; 406}; 407 408&usbh1 { 409 pinctrl-names = "default"; 410 pinctrl-0 = <&pinctrl_usbh1>; 411 vbus-supply = <®_hub_reset>; 412 fsl,usbphy = <&usbh1phy>; 413 phy_type = "ulpi"; 414 status = "okay"; 415}; 416 417&usbotg { 418 dr_mode = "otg"; 419 disable-over-current; 420 phy_type = "utmi_wide"; 421 status = "okay"; 422}; 423 424&iomuxc { 425 imx51-babbage { 426 pinctrl_audmux: audmuxgrp { 427 fsl,pins = < 428 MX51_PAD_AUD3_BB_TXD__AUD3_TXD 0x80000000 429 MX51_PAD_AUD3_BB_RXD__AUD3_RXD 0x80000000 430 MX51_PAD_AUD3_BB_CK__AUD3_TXC 0x80000000 431 MX51_PAD_AUD3_BB_FS__AUD3_TXFS 0x80000000 432 >; 433 }; 434 435 pinctrl_clkcodec: clkcodecgrp { 436 fsl,pins = < 437 MX51_PAD_CSPI1_RDY__GPIO4_26 0x80000000 438 >; 439 }; 440 441 pinctrl_ecspi1: ecspi1grp { 442 fsl,pins = < 443 MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185 444 MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185 445 MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185 446 MX51_PAD_CSPI1_SS0__GPIO4_24 0x85 /* CS0 */ 447 MX51_PAD_CSPI1_SS1__GPIO4_25 0x85 /* CS1 */ 448 >; 449 }; 450 451 pinctrl_esdhc1: esdhc1grp { 452 fsl,pins = < 453 MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5 454 MX51_PAD_SD1_CLK__SD1_CLK 0x20d5 455 MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5 456 MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5 457 MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5 458 MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5 459 MX51_PAD_GPIO1_0__GPIO1_0 0x100 460 MX51_PAD_GPIO1_1__GPIO1_1 0x100 461 >; 462 }; 463 464 pinctrl_esdhc2: esdhc2grp { 465 fsl,pins = < 466 MX51_PAD_SD2_CMD__SD2_CMD 0x400020d5 467 MX51_PAD_SD2_CLK__SD2_CLK 0x20d5 468 MX51_PAD_SD2_DATA0__SD2_DATA0 0x20d5 469 MX51_PAD_SD2_DATA1__SD2_DATA1 0x20d5 470 MX51_PAD_SD2_DATA2__SD2_DATA2 0x20d5 471 MX51_PAD_SD2_DATA3__SD2_DATA3 0x20d5 472 MX51_PAD_GPIO1_5__GPIO1_5 0x100 /* WP */ 473 MX51_PAD_GPIO1_6__GPIO1_6 0x100 /* CD */ 474 >; 475 }; 476 477 pinctrl_fec: fecgrp { 478 fsl,pins = < 479 MX51_PAD_EIM_EB2__FEC_MDIO 0x000001f5 480 MX51_PAD_EIM_EB3__FEC_RDATA1 0x00000085 481 MX51_PAD_EIM_CS2__FEC_RDATA2 0x00000085 482 MX51_PAD_EIM_CS3__FEC_RDATA3 0x00000085 483 MX51_PAD_EIM_CS4__FEC_RX_ER 0x00000180 484 MX51_PAD_EIM_CS5__FEC_CRS 0x00000180 485 MX51_PAD_NANDF_RB2__FEC_COL 0x00000180 486 MX51_PAD_NANDF_RB3__FEC_RX_CLK 0x00000180 487 MX51_PAD_NANDF_D9__FEC_RDATA0 0x00002180 488 MX51_PAD_NANDF_D8__FEC_TDATA0 0x00002004 489 MX51_PAD_NANDF_CS2__FEC_TX_ER 0x00002004 490 MX51_PAD_NANDF_CS3__FEC_MDC 0x00002004 491 MX51_PAD_NANDF_CS4__FEC_TDATA1 0x00002004 492 MX51_PAD_NANDF_CS5__FEC_TDATA2 0x00002004 493 MX51_PAD_NANDF_CS6__FEC_TDATA3 0x00002004 494 MX51_PAD_NANDF_CS7__FEC_TX_EN 0x00002004 495 MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK 0x00002180 496 MX51_PAD_NANDF_D11__FEC_RX_DV 0x000020a4 497 MX51_PAD_EIM_A20__GPIO2_14 0x00000085 /* Phy Reset */ 498 >; 499 }; 500 501 pinctrl_gpio_keys: gpiokeysgrp { 502 fsl,pins = < 503 MX51_PAD_EIM_A27__GPIO2_21 0x5 504 >; 505 }; 506 507 pinctrl_gpio_leds: gpioledsgrp { 508 fsl,pins = < 509 MX51_PAD_EIM_D22__GPIO2_6 0x80000000 510 >; 511 }; 512 513 pinctrl_i2c1: i2c1grp { 514 fsl,pins = < 515 MX51_PAD_EIM_D19__I2C1_SCL 0x400001ed 516 MX51_PAD_EIM_D16__I2C1_SDA 0x400001ed 517 >; 518 }; 519 520 pinctrl_i2c2: i2c2grp { 521 fsl,pins = < 522 MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed 523 MX51_PAD_KEY_COL5__I2C2_SDA 0x400001ed 524 >; 525 }; 526 527 pinctrl_ipu_disp1: ipudisp1grp { 528 fsl,pins = < 529 MX51_PAD_DISP1_DAT0__DISP1_DAT0 0x5 530 MX51_PAD_DISP1_DAT1__DISP1_DAT1 0x5 531 MX51_PAD_DISP1_DAT2__DISP1_DAT2 0x5 532 MX51_PAD_DISP1_DAT3__DISP1_DAT3 0x5 533 MX51_PAD_DISP1_DAT4__DISP1_DAT4 0x5 534 MX51_PAD_DISP1_DAT5__DISP1_DAT5 0x5 535 MX51_PAD_DISP1_DAT6__DISP1_DAT6 0x5 536 MX51_PAD_DISP1_DAT7__DISP1_DAT7 0x5 537 MX51_PAD_DISP1_DAT8__DISP1_DAT8 0x5 538 MX51_PAD_DISP1_DAT9__DISP1_DAT9 0x5 539 MX51_PAD_DISP1_DAT10__DISP1_DAT10 0x5 540 MX51_PAD_DISP1_DAT11__DISP1_DAT11 0x5 541 MX51_PAD_DISP1_DAT12__DISP1_DAT12 0x5 542 MX51_PAD_DISP1_DAT13__DISP1_DAT13 0x5 543 MX51_PAD_DISP1_DAT14__DISP1_DAT14 0x5 544 MX51_PAD_DISP1_DAT15__DISP1_DAT15 0x5 545 MX51_PAD_DISP1_DAT16__DISP1_DAT16 0x5 546 MX51_PAD_DISP1_DAT17__DISP1_DAT17 0x5 547 MX51_PAD_DISP1_DAT18__DISP1_DAT18 0x5 548 MX51_PAD_DISP1_DAT19__DISP1_DAT19 0x5 549 MX51_PAD_DISP1_DAT20__DISP1_DAT20 0x5 550 MX51_PAD_DISP1_DAT21__DISP1_DAT21 0x5 551 MX51_PAD_DISP1_DAT22__DISP1_DAT22 0x5 552 MX51_PAD_DISP1_DAT23__DISP1_DAT23 0x5 553 MX51_PAD_DI1_PIN2__DI1_PIN2 0x5 554 MX51_PAD_DI1_PIN3__DI1_PIN3 0x5 555 >; 556 }; 557 558 pinctrl_ipu_disp2: ipudisp2grp { 559 fsl,pins = < 560 MX51_PAD_DISP2_DAT0__DISP2_DAT0 0x5 561 MX51_PAD_DISP2_DAT1__DISP2_DAT1 0x5 562 MX51_PAD_DISP2_DAT2__DISP2_DAT2 0x5 563 MX51_PAD_DISP2_DAT3__DISP2_DAT3 0x5 564 MX51_PAD_DISP2_DAT4__DISP2_DAT4 0x5 565 MX51_PAD_DISP2_DAT5__DISP2_DAT5 0x5 566 MX51_PAD_DISP2_DAT6__DISP2_DAT6 0x5 567 MX51_PAD_DISP2_DAT7__DISP2_DAT7 0x5 568 MX51_PAD_DISP2_DAT8__DISP2_DAT8 0x5 569 MX51_PAD_DISP2_DAT9__DISP2_DAT9 0x5 570 MX51_PAD_DISP2_DAT10__DISP2_DAT10 0x5 571 MX51_PAD_DISP2_DAT11__DISP2_DAT11 0x5 572 MX51_PAD_DISP2_DAT12__DISP2_DAT12 0x5 573 MX51_PAD_DISP2_DAT13__DISP2_DAT13 0x5 574 MX51_PAD_DISP2_DAT14__DISP2_DAT14 0x5 575 MX51_PAD_DISP2_DAT15__DISP2_DAT15 0x5 576 MX51_PAD_DI2_PIN2__DI2_PIN2 0x5 577 MX51_PAD_DI2_PIN3__DI2_PIN3 0x5 578 MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK 0x5 579 MX51_PAD_DI_GP4__DI2_PIN15 0x5 580 >; 581 }; 582 583 pinctrl_kpp: kppgrp { 584 fsl,pins = < 585 MX51_PAD_KEY_ROW0__KEY_ROW0 0xe0 586 MX51_PAD_KEY_ROW1__KEY_ROW1 0xe0 587 MX51_PAD_KEY_ROW2__KEY_ROW2 0xe0 588 MX51_PAD_KEY_ROW3__KEY_ROW3 0xe0 589 MX51_PAD_KEY_COL0__KEY_COL0 0xe8 590 MX51_PAD_KEY_COL1__KEY_COL1 0xe8 591 MX51_PAD_KEY_COL2__KEY_COL2 0xe8 592 MX51_PAD_KEY_COL3__KEY_COL3 0xe8 593 >; 594 }; 595 596 pinctrl_pmic: pmicgrp { 597 fsl,pins = < 598 MX51_PAD_GPIO1_8__GPIO1_8 0xe5 /* IRQ */ 599 >; 600 }; 601 602 pinctrl_uart1: uart1grp { 603 fsl,pins = < 604 MX51_PAD_UART1_RXD__UART1_RXD 0x1c5 605 MX51_PAD_UART1_TXD__UART1_TXD 0x1c5 606 MX51_PAD_UART1_RTS__UART1_RTS 0x1c5 607 MX51_PAD_UART1_CTS__UART1_CTS 0x1c5 608 >; 609 }; 610 611 pinctrl_uart2: uart2grp { 612 fsl,pins = < 613 MX51_PAD_UART2_RXD__UART2_RXD 0x1c5 614 MX51_PAD_UART2_TXD__UART2_TXD 0x1c5 615 >; 616 }; 617 618 pinctrl_uart3: uart3grp { 619 fsl,pins = < 620 MX51_PAD_EIM_D25__UART3_RXD 0x1c5 621 MX51_PAD_EIM_D26__UART3_TXD 0x1c5 622 MX51_PAD_EIM_D27__UART3_RTS 0x1c5 623 MX51_PAD_EIM_D24__UART3_CTS 0x1c5 624 >; 625 }; 626 627 pinctrl_usbh1: usbh1grp { 628 fsl,pins = < 629 MX51_PAD_USBH1_CLK__USBH1_CLK 0x80000000 630 MX51_PAD_USBH1_DIR__USBH1_DIR 0x80000000 631 MX51_PAD_USBH1_NXT__USBH1_NXT 0x80000000 632 MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x80000000 633 MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x80000000 634 MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x80000000 635 MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x80000000 636 MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x80000000 637 MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x80000000 638 MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x80000000 639 MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x80000000 640 >; 641 }; 642 643 pinctrl_usbh1reg: usbh1reggrp { 644 fsl,pins = < 645 MX51_PAD_EIM_D21__GPIO2_5 0x85 646 >; 647 }; 648 649 pinctrl_usbotgreg: usbotgreggrp { 650 fsl,pins = < 651 MX51_PAD_GPIO1_7__GPIO1_7 0x85 652 >; 653 }; 654 }; 655}; 656