imx28-cfa10037.dts revision 284090 
1/*
2 * Copyright 2012 Free Electrons
3 *
4 * The code contained herein is licensed under the GNU General Public
5 * License. You may obtain a copy of the GNU General Public License
6 * Version 2 or later at the following locations:
7 *
8 * http://www.opensource.org/licenses/gpl-license.html
9 * http://www.gnu.org/copyleft/gpl.html
10 */
11
12/*
13 * The CFA-10049 is an expansion board for the CFA-10036 module, thus we
14 * need to include the CFA-10036 DTS.
15 */
16#include "imx28-cfa10036.dts"
17
18/ {
19	model = "Crystalfontz CFA-10037 Board";
20	compatible = "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
21
22	apb@80000000 {
23		apbh@80000000 {
24			pinctrl@80018000 {
25				usb_pins_cfa10037: usb-10037@0 {
26					reg = <0>;
27					fsl,pinmux-ids = <
28						MX28_PAD_GPMI_D07__GPIO_0_7
29					>;
30					fsl,drive-strength = <MXS_DRIVE_4mA>;
31					fsl,voltage = <MXS_VOLTAGE_HIGH>;
32					fsl,pull-up = <MXS_PULL_DISABLE>;
33				};
34
35				mac0_pins_cfa10037: mac0-10037@0 {
36					reg = <0>;
37					fsl,pinmux-ids = <
38						MX28_PAD_SSP2_SS2__GPIO_2_21
39					>;
40					fsl,drive-strength = <MXS_DRIVE_4mA>;
41					fsl,voltage = <MXS_VOLTAGE_HIGH>;
42					fsl,pull-up = <MXS_PULL_DISABLE>;
43				};
44			};
45		};
46
47		apbx@80040000 {
48			usbphy1: usbphy@8007e000 {
49				status = "okay";
50			};
51		};
52	};
53
54	ahb@80080000 {
55		usb1: usb@80090000 {
56			vbus-supply = <&reg_usb1_vbus>;
57			pinctrl-0 = <&usb1_pins_a>;
58			pinctrl-names = "default";
59			status = "okay";
60		};
61
62		mac0: ethernet@800f0000 {
63			phy-mode = "rmii";
64			pinctrl-names = "default";
65			pinctrl-0 = <&mac0_pins_a
66				&mac0_pins_cfa10037>;
67			phy-reset-gpios = <&gpio2 21 0>;
68			phy-reset-duration = <100>;
69			status = "okay";
70		};
71	};
72
73	regulators {
74		compatible = "simple-bus";
75		#address-cells = <1>;
76		#size-cells = <0>;
77
78		reg_usb1_vbus: regulator@0 {
79			compatible = "regulator-fixed";
80			reg = <0>;
81			pinctrl-names = "default";
82			pinctrl-0 = <&usb_pins_cfa10037>;
83			regulator-name = "usb1_vbus";
84			regulator-min-microvolt = <5000000>;
85			regulator-max-microvolt = <5000000>;
86			gpio = <&gpio0 7 1>;
87		};
88	};
89};
90