usb_device.c revision 287274
1/* $FreeBSD: stable/10/sys/dev/usb/usb_device.c 287274 2015-08-29 06:23:40Z hselasky $ */ 2/*- 3 * Copyright (c) 2008 Hans Petter Selasky. All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 24 * SUCH DAMAGE. 25 */ 26 27#ifdef USB_GLOBAL_INCLUDE_FILE 28#include USB_GLOBAL_INCLUDE_FILE 29#else 30#include <sys/stdint.h> 31#include <sys/stddef.h> 32#include <sys/param.h> 33#include <sys/queue.h> 34#include <sys/types.h> 35#include <sys/systm.h> 36#include <sys/kernel.h> 37#include <sys/bus.h> 38#include <sys/module.h> 39#include <sys/lock.h> 40#include <sys/mutex.h> 41#include <sys/condvar.h> 42#include <sys/sysctl.h> 43#include <sys/sx.h> 44#include <sys/unistd.h> 45#include <sys/callout.h> 46#include <sys/malloc.h> 47#include <sys/priv.h> 48#include <sys/conf.h> 49#include <sys/fcntl.h> 50 51#include <dev/usb/usb.h> 52#include <dev/usb/usbdi.h> 53#include <dev/usb/usbdi_util.h> 54#include <dev/usb/usb_ioctl.h> 55 56#if USB_HAVE_UGEN 57#include <sys/sbuf.h> 58#endif 59 60#include "usbdevs.h" 61 62#define USB_DEBUG_VAR usb_debug 63 64#include <dev/usb/usb_core.h> 65#include <dev/usb/usb_debug.h> 66#include <dev/usb/usb_process.h> 67#include <dev/usb/usb_device.h> 68#include <dev/usb/usb_busdma.h> 69#include <dev/usb/usb_transfer.h> 70#include <dev/usb/usb_request.h> 71#include <dev/usb/usb_dynamic.h> 72#include <dev/usb/usb_hub.h> 73#include <dev/usb/usb_util.h> 74#include <dev/usb/usb_msctest.h> 75#if USB_HAVE_UGEN 76#include <dev/usb/usb_dev.h> 77#include <dev/usb/usb_generic.h> 78#endif 79 80#include <dev/usb/quirk/usb_quirk.h> 81 82#include <dev/usb/usb_controller.h> 83#include <dev/usb/usb_bus.h> 84#endif /* USB_GLOBAL_INCLUDE_FILE */ 85 86/* function prototypes */ 87 88static void usb_init_endpoint(struct usb_device *, uint8_t, 89 struct usb_endpoint_descriptor *, 90 struct usb_endpoint_ss_comp_descriptor *, 91 struct usb_endpoint *); 92static void usb_unconfigure(struct usb_device *, uint8_t); 93static void usb_detach_device_sub(struct usb_device *, device_t *, 94 char **, uint8_t); 95static uint8_t usb_probe_and_attach_sub(struct usb_device *, 96 struct usb_attach_arg *); 97static void usb_init_attach_arg(struct usb_device *, 98 struct usb_attach_arg *); 99static void usb_suspend_resume_sub(struct usb_device *, device_t, 100 uint8_t); 101static usb_proc_callback_t usbd_clear_stall_proc; 102static usb_error_t usb_config_parse(struct usb_device *, uint8_t, uint8_t); 103static void usbd_set_device_strings(struct usb_device *); 104#if USB_HAVE_DEVCTL 105static void usb_notify_addq(const char *type, struct usb_device *); 106#endif 107#if USB_HAVE_UGEN 108static void usb_fifo_free_wrap(struct usb_device *, uint8_t, uint8_t); 109static void usb_cdev_create(struct usb_device *); 110static void usb_cdev_free(struct usb_device *); 111#endif 112 113/* This variable is global to allow easy access to it: */ 114 115#ifdef USB_TEMPLATE 116int usb_template = USB_TEMPLATE; 117#else 118int usb_template; 119#endif 120 121TUNABLE_INT("hw.usb.usb_template", &usb_template); 122SYSCTL_INT(_hw_usb, OID_AUTO, template, CTLFLAG_RW | CTLFLAG_TUN, 123 &usb_template, 0, "Selected USB device side template"); 124 125/* English is default language */ 126 127static int usb_lang_id = 0x0009; 128static int usb_lang_mask = 0x00FF; 129 130TUNABLE_INT("hw.usb.usb_lang_id", &usb_lang_id); 131SYSCTL_INT(_hw_usb, OID_AUTO, usb_lang_id, CTLFLAG_RW | CTLFLAG_TUN, 132 &usb_lang_id, 0, "Preferred USB language ID"); 133 134TUNABLE_INT("hw.usb.usb_lang_mask", &usb_lang_mask); 135SYSCTL_INT(_hw_usb, OID_AUTO, usb_lang_mask, CTLFLAG_RW | CTLFLAG_TUN, 136 &usb_lang_mask, 0, "Preferred USB language mask"); 137 138static const char* statestr[USB_STATE_MAX] = { 139 [USB_STATE_DETACHED] = "DETACHED", 140 [USB_STATE_ATTACHED] = "ATTACHED", 141 [USB_STATE_POWERED] = "POWERED", 142 [USB_STATE_ADDRESSED] = "ADDRESSED", 143 [USB_STATE_CONFIGURED] = "CONFIGURED", 144}; 145 146const char * 147usb_statestr(enum usb_dev_state state) 148{ 149 return ((state < USB_STATE_MAX) ? statestr[state] : "UNKNOWN"); 150} 151 152const char * 153usb_get_manufacturer(struct usb_device *udev) 154{ 155 return (udev->manufacturer ? udev->manufacturer : "Unknown"); 156} 157 158const char * 159usb_get_product(struct usb_device *udev) 160{ 161 return (udev->product ? udev->product : ""); 162} 163 164const char * 165usb_get_serial(struct usb_device *udev) 166{ 167 return (udev->serial ? udev->serial : ""); 168} 169 170/*------------------------------------------------------------------------* 171 * usbd_get_ep_by_addr 172 * 173 * This function searches for an USB ep by endpoint address and 174 * direction. 175 * 176 * Returns: 177 * NULL: Failure 178 * Else: Success 179 *------------------------------------------------------------------------*/ 180struct usb_endpoint * 181usbd_get_ep_by_addr(struct usb_device *udev, uint8_t ea_val) 182{ 183 struct usb_endpoint *ep = udev->endpoints; 184 struct usb_endpoint *ep_end = udev->endpoints + udev->endpoints_max; 185 enum { 186 EA_MASK = (UE_DIR_IN | UE_DIR_OUT | UE_ADDR), 187 }; 188 189 /* 190 * According to the USB specification not all bits are used 191 * for the endpoint address. Keep defined bits only: 192 */ 193 ea_val &= EA_MASK; 194 195 /* 196 * Iterate accross all the USB endpoints searching for a match 197 * based on the endpoint address: 198 */ 199 for (; ep != ep_end; ep++) { 200 201 if (ep->edesc == NULL) { 202 continue; 203 } 204 /* do the mask and check the value */ 205 if ((ep->edesc->bEndpointAddress & EA_MASK) == ea_val) { 206 goto found; 207 } 208 } 209 210 /* 211 * The default endpoint is always present and is checked separately: 212 */ 213 if ((udev->ctrl_ep.edesc != NULL) && 214 ((udev->ctrl_ep.edesc->bEndpointAddress & EA_MASK) == ea_val)) { 215 ep = &udev->ctrl_ep; 216 goto found; 217 } 218 return (NULL); 219 220found: 221 return (ep); 222} 223 224/*------------------------------------------------------------------------* 225 * usbd_get_endpoint 226 * 227 * This function searches for an USB endpoint based on the information 228 * given by the passed "struct usb_config" pointer. 229 * 230 * Return values: 231 * NULL: No match. 232 * Else: Pointer to "struct usb_endpoint". 233 *------------------------------------------------------------------------*/ 234struct usb_endpoint * 235usbd_get_endpoint(struct usb_device *udev, uint8_t iface_index, 236 const struct usb_config *setup) 237{ 238 struct usb_endpoint *ep = udev->endpoints; 239 struct usb_endpoint *ep_end = udev->endpoints + udev->endpoints_max; 240 uint8_t index = setup->ep_index; 241 uint8_t ea_mask; 242 uint8_t ea_val; 243 uint8_t type_mask; 244 uint8_t type_val; 245 246 DPRINTFN(10, "udev=%p iface_index=%d address=0x%x " 247 "type=0x%x dir=0x%x index=%d\n", 248 udev, iface_index, setup->endpoint, 249 setup->type, setup->direction, setup->ep_index); 250 251 /* check USB mode */ 252 253 if (setup->usb_mode != USB_MODE_DUAL && 254 udev->flags.usb_mode != setup->usb_mode) { 255 /* wrong mode - no endpoint */ 256 return (NULL); 257 } 258 259 /* setup expected endpoint direction mask and value */ 260 261 if (setup->direction == UE_DIR_RX) { 262 ea_mask = (UE_DIR_IN | UE_DIR_OUT); 263 ea_val = (udev->flags.usb_mode == USB_MODE_DEVICE) ? 264 UE_DIR_OUT : UE_DIR_IN; 265 } else if (setup->direction == UE_DIR_TX) { 266 ea_mask = (UE_DIR_IN | UE_DIR_OUT); 267 ea_val = (udev->flags.usb_mode == USB_MODE_DEVICE) ? 268 UE_DIR_IN : UE_DIR_OUT; 269 } else if (setup->direction == UE_DIR_ANY) { 270 /* match any endpoint direction */ 271 ea_mask = 0; 272 ea_val = 0; 273 } else { 274 /* match the given endpoint direction */ 275 ea_mask = (UE_DIR_IN | UE_DIR_OUT); 276 ea_val = (setup->direction & (UE_DIR_IN | UE_DIR_OUT)); 277 } 278 279 /* setup expected endpoint address */ 280 281 if (setup->endpoint == UE_ADDR_ANY) { 282 /* match any endpoint address */ 283 } else { 284 /* match the given endpoint address */ 285 ea_mask |= UE_ADDR; 286 ea_val |= (setup->endpoint & UE_ADDR); 287 } 288 289 /* setup expected endpoint type */ 290 291 if (setup->type == UE_BULK_INTR) { 292 /* this will match BULK and INTERRUPT endpoints */ 293 type_mask = 2; 294 type_val = 2; 295 } else if (setup->type == UE_TYPE_ANY) { 296 /* match any endpoint type */ 297 type_mask = 0; 298 type_val = 0; 299 } else { 300 /* match the given endpoint type */ 301 type_mask = UE_XFERTYPE; 302 type_val = (setup->type & UE_XFERTYPE); 303 } 304 305 /* 306 * Iterate accross all the USB endpoints searching for a match 307 * based on the endpoint address. Note that we are searching 308 * the endpoints from the beginning of the "udev->endpoints" array. 309 */ 310 for (; ep != ep_end; ep++) { 311 312 if ((ep->edesc == NULL) || 313 (ep->iface_index != iface_index)) { 314 continue; 315 } 316 /* do the masks and check the values */ 317 318 if (((ep->edesc->bEndpointAddress & ea_mask) == ea_val) && 319 ((ep->edesc->bmAttributes & type_mask) == type_val)) { 320 if (!index--) { 321 goto found; 322 } 323 } 324 } 325 326 /* 327 * Match against default endpoint last, so that "any endpoint", "any 328 * address" and "any direction" returns the first endpoint of the 329 * interface. "iface_index" and "direction" is ignored: 330 */ 331 if ((udev->ctrl_ep.edesc != NULL) && 332 ((udev->ctrl_ep.edesc->bEndpointAddress & ea_mask) == ea_val) && 333 ((udev->ctrl_ep.edesc->bmAttributes & type_mask) == type_val) && 334 (!index)) { 335 ep = &udev->ctrl_ep; 336 goto found; 337 } 338 return (NULL); 339 340found: 341 return (ep); 342} 343 344/*------------------------------------------------------------------------* 345 * usbd_interface_count 346 * 347 * This function stores the number of USB interfaces excluding 348 * alternate settings, which the USB config descriptor reports into 349 * the unsigned 8-bit integer pointed to by "count". 350 * 351 * Returns: 352 * 0: Success 353 * Else: Failure 354 *------------------------------------------------------------------------*/ 355usb_error_t 356usbd_interface_count(struct usb_device *udev, uint8_t *count) 357{ 358 if (udev->cdesc == NULL) { 359 *count = 0; 360 return (USB_ERR_NOT_CONFIGURED); 361 } 362 *count = udev->ifaces_max; 363 return (USB_ERR_NORMAL_COMPLETION); 364} 365 366/*------------------------------------------------------------------------* 367 * usb_init_endpoint 368 * 369 * This function will initialise the USB endpoint structure pointed to by 370 * the "endpoint" argument. The structure pointed to by "endpoint" must be 371 * zeroed before calling this function. 372 *------------------------------------------------------------------------*/ 373static void 374usb_init_endpoint(struct usb_device *udev, uint8_t iface_index, 375 struct usb_endpoint_descriptor *edesc, 376 struct usb_endpoint_ss_comp_descriptor *ecomp, 377 struct usb_endpoint *ep) 378{ 379 struct usb_bus_methods *methods; 380 usb_stream_t x; 381 382 methods = udev->bus->methods; 383 384 (methods->endpoint_init) (udev, edesc, ep); 385 386 /* initialise USB endpoint structure */ 387 ep->edesc = edesc; 388 ep->ecomp = ecomp; 389 ep->iface_index = iface_index; 390 391 /* setup USB stream queues */ 392 for (x = 0; x != USB_MAX_EP_STREAMS; x++) { 393 TAILQ_INIT(&ep->endpoint_q[x].head); 394 ep->endpoint_q[x].command = &usbd_pipe_start; 395 } 396 397 /* the pipe is not supported by the hardware */ 398 if (ep->methods == NULL) 399 return; 400 401 /* check for SUPER-speed streams mode endpoint */ 402 if (udev->speed == USB_SPEED_SUPER && ecomp != NULL && 403 (edesc->bmAttributes & UE_XFERTYPE) == UE_BULK && 404 (UE_GET_BULK_STREAMS(ecomp->bmAttributes) != 0)) { 405 usbd_set_endpoint_mode(udev, ep, USB_EP_MODE_STREAMS); 406 } else { 407 usbd_set_endpoint_mode(udev, ep, USB_EP_MODE_DEFAULT); 408 } 409 410 /* clear stall, if any */ 411 if (methods->clear_stall != NULL) { 412 USB_BUS_LOCK(udev->bus); 413 (methods->clear_stall) (udev, ep); 414 USB_BUS_UNLOCK(udev->bus); 415 } 416} 417 418/*-----------------------------------------------------------------------* 419 * usb_endpoint_foreach 420 * 421 * This function will iterate all the USB endpoints except the control 422 * endpoint. This function is NULL safe. 423 * 424 * Return values: 425 * NULL: End of USB endpoints 426 * Else: Pointer to next USB endpoint 427 *------------------------------------------------------------------------*/ 428struct usb_endpoint * 429usb_endpoint_foreach(struct usb_device *udev, struct usb_endpoint *ep) 430{ 431 struct usb_endpoint *ep_end; 432 433 /* be NULL safe */ 434 if (udev == NULL) 435 return (NULL); 436 437 ep_end = udev->endpoints + udev->endpoints_max; 438 439 /* get next endpoint */ 440 if (ep == NULL) 441 ep = udev->endpoints; 442 else 443 ep++; 444 445 /* find next allocated ep */ 446 while (ep != ep_end) { 447 if (ep->edesc != NULL) 448 return (ep); 449 ep++; 450 } 451 return (NULL); 452} 453 454/*------------------------------------------------------------------------* 455 * usb_wait_pending_refs 456 * 457 * This function will wait for any USB references to go away before 458 * returning. This function is used before freeing a USB device. 459 *------------------------------------------------------------------------*/ 460static void 461usb_wait_pending_refs(struct usb_device *udev) 462{ 463#if USB_HAVE_UGEN 464 DPRINTF("Refcount = %d\n", (int)udev->refcount); 465 466 mtx_lock(&usb_ref_lock); 467 udev->refcount--; 468 while (1) { 469 /* wait for any pending references to go away */ 470 if (udev->refcount == 0) { 471 /* prevent further refs being taken, if any */ 472 udev->refcount = USB_DEV_REF_MAX; 473 break; 474 } 475 cv_wait(&udev->ref_cv, &usb_ref_lock); 476 } 477 mtx_unlock(&usb_ref_lock); 478#endif 479} 480 481/*------------------------------------------------------------------------* 482 * usb_unconfigure 483 * 484 * This function will free all USB interfaces and USB endpoints belonging 485 * to an USB device. 486 * 487 * Flag values, see "USB_UNCFG_FLAG_XXX". 488 *------------------------------------------------------------------------*/ 489static void 490usb_unconfigure(struct usb_device *udev, uint8_t flag) 491{ 492 uint8_t do_unlock; 493 494 /* Prevent re-enumeration */ 495 do_unlock = usbd_enum_lock(udev); 496 497 /* detach all interface drivers */ 498 usb_detach_device(udev, USB_IFACE_INDEX_ANY, flag); 499 500#if USB_HAVE_UGEN 501 /* free all FIFOs except control endpoint FIFOs */ 502 usb_fifo_free_wrap(udev, USB_IFACE_INDEX_ANY, flag); 503 504 /* 505 * Free all cdev's, if any. 506 */ 507 usb_cdev_free(udev); 508#endif 509 510#if USB_HAVE_COMPAT_LINUX 511 /* free Linux compat device, if any */ 512 if (udev->linux_endpoint_start) { 513 usb_linux_free_device(udev); 514 udev->linux_endpoint_start = NULL; 515 } 516#endif 517 518 usb_config_parse(udev, USB_IFACE_INDEX_ANY, USB_CFG_FREE); 519 520 /* free "cdesc" after "ifaces" and "endpoints", if any */ 521 if (udev->cdesc != NULL) { 522 if (udev->flags.usb_mode != USB_MODE_DEVICE) 523 usbd_free_config_desc(udev, udev->cdesc); 524 udev->cdesc = NULL; 525 } 526 /* set unconfigured state */ 527 udev->curr_config_no = USB_UNCONFIG_NO; 528 udev->curr_config_index = USB_UNCONFIG_INDEX; 529 530 if (do_unlock) 531 usbd_enum_unlock(udev); 532} 533 534/*------------------------------------------------------------------------* 535 * usbd_set_config_index 536 * 537 * This function selects configuration by index, independent of the 538 * actual configuration number. This function should not be used by 539 * USB drivers. 540 * 541 * Returns: 542 * 0: Success 543 * Else: Failure 544 *------------------------------------------------------------------------*/ 545usb_error_t 546usbd_set_config_index(struct usb_device *udev, uint8_t index) 547{ 548 struct usb_status ds; 549 struct usb_config_descriptor *cdp; 550 uint16_t power; 551 uint16_t max_power; 552 uint8_t selfpowered; 553 uint8_t do_unlock; 554 usb_error_t err; 555 556 DPRINTFN(6, "udev=%p index=%d\n", udev, index); 557 558 /* Prevent re-enumeration */ 559 do_unlock = usbd_enum_lock(udev); 560 561 usb_unconfigure(udev, 0); 562 563 if (index == USB_UNCONFIG_INDEX) { 564 /* 565 * Leave unallocated when unconfiguring the 566 * device. "usb_unconfigure()" will also reset 567 * the current config number and index. 568 */ 569 err = usbd_req_set_config(udev, NULL, USB_UNCONFIG_NO); 570 if (udev->state == USB_STATE_CONFIGURED) 571 usb_set_device_state(udev, USB_STATE_ADDRESSED); 572 goto done; 573 } 574 /* get the full config descriptor */ 575 if (udev->flags.usb_mode == USB_MODE_DEVICE) { 576 /* save some memory */ 577 err = usbd_req_get_descriptor_ptr(udev, &cdp, 578 (UDESC_CONFIG << 8) | index); 579 } else { 580 /* normal request */ 581 err = usbd_req_get_config_desc_full(udev, 582 NULL, &cdp, index); 583 } 584 if (err) { 585 goto done; 586 } 587 /* set the new config descriptor */ 588 589 udev->cdesc = cdp; 590 591 /* Figure out if the device is self or bus powered. */ 592 selfpowered = 0; 593 if ((!udev->flags.uq_bus_powered) && 594 (cdp->bmAttributes & UC_SELF_POWERED) && 595 (udev->flags.usb_mode == USB_MODE_HOST)) { 596 /* May be self powered. */ 597 if (cdp->bmAttributes & UC_BUS_POWERED) { 598 /* Must ask device. */ 599 err = usbd_req_get_device_status(udev, NULL, &ds); 600 if (err) { 601 DPRINTFN(0, "could not read " 602 "device status: %s\n", 603 usbd_errstr(err)); 604 } else if (UGETW(ds.wStatus) & UDS_SELF_POWERED) { 605 selfpowered = 1; 606 } 607 DPRINTF("status=0x%04x \n", 608 UGETW(ds.wStatus)); 609 } else 610 selfpowered = 1; 611 } 612 DPRINTF("udev=%p cdesc=%p (addr %d) cno=%d attr=0x%02x, " 613 "selfpowered=%d, power=%d\n", 614 udev, cdp, 615 udev->address, cdp->bConfigurationValue, cdp->bmAttributes, 616 selfpowered, cdp->bMaxPower * 2); 617 618 /* Check if we have enough power. */ 619 power = cdp->bMaxPower * 2; 620 621 if (udev->parent_hub) { 622 max_power = udev->parent_hub->hub->portpower; 623 } else { 624 max_power = USB_MAX_POWER; 625 } 626 627 if (power > max_power) { 628 DPRINTFN(0, "power exceeded %d > %d\n", power, max_power); 629 err = USB_ERR_NO_POWER; 630 goto done; 631 } 632 /* Only update "self_powered" in USB Host Mode */ 633 if (udev->flags.usb_mode == USB_MODE_HOST) { 634 udev->flags.self_powered = selfpowered; 635 } 636 udev->power = power; 637 udev->curr_config_no = cdp->bConfigurationValue; 638 udev->curr_config_index = index; 639 usb_set_device_state(udev, USB_STATE_CONFIGURED); 640 641 /* Set the actual configuration value. */ 642 err = usbd_req_set_config(udev, NULL, cdp->bConfigurationValue); 643 if (err) { 644 goto done; 645 } 646 647 err = usb_config_parse(udev, USB_IFACE_INDEX_ANY, USB_CFG_ALLOC); 648 if (err) { 649 goto done; 650 } 651 652 err = usb_config_parse(udev, USB_IFACE_INDEX_ANY, USB_CFG_INIT); 653 if (err) { 654 goto done; 655 } 656 657#if USB_HAVE_UGEN 658 /* create device nodes for each endpoint */ 659 usb_cdev_create(udev); 660#endif 661 662done: 663 DPRINTF("error=%s\n", usbd_errstr(err)); 664 if (err) { 665 usb_unconfigure(udev, 0); 666 } 667 if (do_unlock) 668 usbd_enum_unlock(udev); 669 return (err); 670} 671 672/*------------------------------------------------------------------------* 673 * usb_config_parse 674 * 675 * This function will allocate and free USB interfaces and USB endpoints, 676 * parse the USB configuration structure and initialise the USB endpoints 677 * and interfaces. If "iface_index" is not equal to 678 * "USB_IFACE_INDEX_ANY" then the "cmd" parameter is the 679 * alternate_setting to be selected for the given interface. Else the 680 * "cmd" parameter is defined by "USB_CFG_XXX". "iface_index" can be 681 * "USB_IFACE_INDEX_ANY" or a valid USB interface index. This function 682 * is typically called when setting the configuration or when setting 683 * an alternate interface. 684 * 685 * Returns: 686 * 0: Success 687 * Else: Failure 688 *------------------------------------------------------------------------*/ 689static usb_error_t 690usb_config_parse(struct usb_device *udev, uint8_t iface_index, uint8_t cmd) 691{ 692 struct usb_idesc_parse_state ips; 693 struct usb_interface_descriptor *id; 694 struct usb_endpoint_descriptor *ed; 695 struct usb_interface *iface; 696 struct usb_endpoint *ep; 697 usb_error_t err; 698 uint8_t ep_curr; 699 uint8_t ep_max; 700 uint8_t temp; 701 uint8_t do_init; 702 uint8_t alt_index; 703 704 if (iface_index != USB_IFACE_INDEX_ANY) { 705 /* parameter overload */ 706 alt_index = cmd; 707 cmd = USB_CFG_INIT; 708 } else { 709 /* not used */ 710 alt_index = 0; 711 } 712 713 err = 0; 714 715 DPRINTFN(5, "iface_index=%d cmd=%d\n", 716 iface_index, cmd); 717 718 if (cmd == USB_CFG_FREE) 719 goto cleanup; 720 721 if (cmd == USB_CFG_INIT) { 722 sx_assert(&udev->enum_sx, SA_LOCKED); 723 724 /* check for in-use endpoints */ 725 726 ep = udev->endpoints; 727 ep_max = udev->endpoints_max; 728 while (ep_max--) { 729 /* look for matching endpoints */ 730 if ((iface_index == USB_IFACE_INDEX_ANY) || 731 (iface_index == ep->iface_index)) { 732 if (ep->refcount_alloc != 0) { 733 /* 734 * This typically indicates a 735 * more serious error. 736 */ 737 err = USB_ERR_IN_USE; 738 } else { 739 /* reset endpoint */ 740 memset(ep, 0, sizeof(*ep)); 741 /* make sure we don't zero the endpoint again */ 742 ep->iface_index = USB_IFACE_INDEX_ANY; 743 } 744 } 745 ep++; 746 } 747 748 if (err) 749 return (err); 750 } 751 752 memset(&ips, 0, sizeof(ips)); 753 754 ep_curr = 0; 755 ep_max = 0; 756 757 while ((id = usb_idesc_foreach(udev->cdesc, &ips))) { 758 759 iface = udev->ifaces + ips.iface_index; 760 761 /* check for specific interface match */ 762 763 if (cmd == USB_CFG_INIT) { 764 if ((iface_index != USB_IFACE_INDEX_ANY) && 765 (iface_index != ips.iface_index)) { 766 /* wrong interface */ 767 do_init = 0; 768 } else if (alt_index != ips.iface_index_alt) { 769 /* wrong alternate setting */ 770 do_init = 0; 771 } else { 772 /* initialise interface */ 773 do_init = 1; 774 } 775 } else 776 do_init = 0; 777 778 /* check for new interface */ 779 if (ips.iface_index_alt == 0) { 780 /* update current number of endpoints */ 781 ep_curr = ep_max; 782 } 783 /* check for init */ 784 if (do_init) { 785 /* setup the USB interface structure */ 786 iface->idesc = id; 787 /* set alternate index */ 788 iface->alt_index = alt_index; 789 /* set default interface parent */ 790 if (iface_index == USB_IFACE_INDEX_ANY) { 791 iface->parent_iface_index = 792 USB_IFACE_INDEX_ANY; 793 } 794 } 795 796 DPRINTFN(5, "found idesc nendpt=%d\n", id->bNumEndpoints); 797 798 ed = (struct usb_endpoint_descriptor *)id; 799 800 temp = ep_curr; 801 802 /* iterate all the endpoint descriptors */ 803 while ((ed = usb_edesc_foreach(udev->cdesc, ed))) { 804 805 /* check if endpoint limit has been reached */ 806 if (temp >= USB_MAX_EP_UNITS) { 807 DPRINTF("Endpoint limit reached\n"); 808 break; 809 } 810 811 ep = udev->endpoints + temp; 812 813 if (do_init) { 814 void *ecomp; 815 816 ecomp = usb_ed_comp_foreach(udev->cdesc, (void *)ed); 817 if (ecomp != NULL) 818 DPRINTFN(5, "Found endpoint companion descriptor\n"); 819 820 usb_init_endpoint(udev, 821 ips.iface_index, ed, ecomp, ep); 822 } 823 824 temp ++; 825 826 /* find maximum number of endpoints */ 827 if (ep_max < temp) 828 ep_max = temp; 829 } 830 } 831 832 /* NOTE: It is valid to have no interfaces and no endpoints! */ 833 834 if (cmd == USB_CFG_ALLOC) { 835 udev->ifaces_max = ips.iface_index; 836#if (USB_HAVE_FIXED_IFACE == 0) 837 udev->ifaces = NULL; 838 if (udev->ifaces_max != 0) { 839 udev->ifaces = malloc(sizeof(*iface) * udev->ifaces_max, 840 M_USB, M_WAITOK | M_ZERO); 841 if (udev->ifaces == NULL) { 842 err = USB_ERR_NOMEM; 843 goto done; 844 } 845 } 846#endif 847#if (USB_HAVE_FIXED_ENDPOINT == 0) 848 if (ep_max != 0) { 849 udev->endpoints = malloc(sizeof(*ep) * ep_max, 850 M_USB, M_WAITOK | M_ZERO); 851 if (udev->endpoints == NULL) { 852 err = USB_ERR_NOMEM; 853 goto done; 854 } 855 } else { 856 udev->endpoints = NULL; 857 } 858#endif 859 USB_BUS_LOCK(udev->bus); 860 udev->endpoints_max = ep_max; 861 /* reset any ongoing clear-stall */ 862 udev->ep_curr = NULL; 863 USB_BUS_UNLOCK(udev->bus); 864 } 865#if (USB_HAVE_FIXED_IFACE == 0) || (USB_HAVE_FIXED_ENDPOINT == 0) 866done: 867#endif 868 if (err) { 869 if (cmd == USB_CFG_ALLOC) { 870cleanup: 871 USB_BUS_LOCK(udev->bus); 872 udev->endpoints_max = 0; 873 /* reset any ongoing clear-stall */ 874 udev->ep_curr = NULL; 875 USB_BUS_UNLOCK(udev->bus); 876 877#if (USB_HAVE_FIXED_IFACE == 0) 878 free(udev->ifaces, M_USB); 879 udev->ifaces = NULL; 880#endif 881#if (USB_HAVE_FIXED_ENDPOINT == 0) 882 free(udev->endpoints, M_USB); 883 udev->endpoints = NULL; 884#endif 885 udev->ifaces_max = 0; 886 } 887 } 888 return (err); 889} 890 891/*------------------------------------------------------------------------* 892 * usbd_set_alt_interface_index 893 * 894 * This function will select an alternate interface index for the 895 * given interface index. The interface should not be in use when this 896 * function is called. That means there should not be any open USB 897 * transfers. Else an error is returned. If the alternate setting is 898 * already set this function will simply return success. This function 899 * is called in Host mode and Device mode! 900 * 901 * Returns: 902 * 0: Success 903 * Else: Failure 904 *------------------------------------------------------------------------*/ 905usb_error_t 906usbd_set_alt_interface_index(struct usb_device *udev, 907 uint8_t iface_index, uint8_t alt_index) 908{ 909 struct usb_interface *iface = usbd_get_iface(udev, iface_index); 910 usb_error_t err; 911 uint8_t do_unlock; 912 913 /* Prevent re-enumeration */ 914 do_unlock = usbd_enum_lock(udev); 915 916 if (iface == NULL) { 917 err = USB_ERR_INVAL; 918 goto done; 919 } 920 if (iface->alt_index == alt_index) { 921 /* 922 * Optimise away duplicate setting of 923 * alternate setting in USB Host Mode! 924 */ 925 err = 0; 926 goto done; 927 } 928#if USB_HAVE_UGEN 929 /* 930 * Free all generic FIFOs for this interface, except control 931 * endpoint FIFOs: 932 */ 933 usb_fifo_free_wrap(udev, iface_index, 0); 934#endif 935 936 err = usb_config_parse(udev, iface_index, alt_index); 937 if (err) { 938 goto done; 939 } 940 if (iface->alt_index != alt_index) { 941 /* the alternate setting does not exist */ 942 err = USB_ERR_INVAL; 943 goto done; 944 } 945 946 err = usbd_req_set_alt_interface_no(udev, NULL, iface_index, 947 iface->idesc->bAlternateSetting); 948 949done: 950 if (do_unlock) 951 usbd_enum_unlock(udev); 952 return (err); 953} 954 955/*------------------------------------------------------------------------* 956 * usbd_set_endpoint_stall 957 * 958 * This function is used to make a BULK or INTERRUPT endpoint send 959 * STALL tokens in USB device mode. 960 * 961 * Returns: 962 * 0: Success 963 * Else: Failure 964 *------------------------------------------------------------------------*/ 965usb_error_t 966usbd_set_endpoint_stall(struct usb_device *udev, struct usb_endpoint *ep, 967 uint8_t do_stall) 968{ 969 struct usb_xfer *xfer; 970 usb_stream_t x; 971 uint8_t et; 972 uint8_t was_stalled; 973 974 if (ep == NULL) { 975 /* nothing to do */ 976 DPRINTF("Cannot find endpoint\n"); 977 /* 978 * Pretend that the clear or set stall request is 979 * successful else some USB host stacks can do 980 * strange things, especially when a control endpoint 981 * stalls. 982 */ 983 return (0); 984 } 985 et = (ep->edesc->bmAttributes & UE_XFERTYPE); 986 987 if ((et != UE_BULK) && 988 (et != UE_INTERRUPT)) { 989 /* 990 * Should not stall control 991 * nor isochronous endpoints. 992 */ 993 DPRINTF("Invalid endpoint\n"); 994 return (0); 995 } 996 USB_BUS_LOCK(udev->bus); 997 998 /* store current stall state */ 999 was_stalled = ep->is_stalled; 1000 1001 /* check for no change */ 1002 if (was_stalled && do_stall) { 1003 /* if the endpoint is already stalled do nothing */ 1004 USB_BUS_UNLOCK(udev->bus); 1005 DPRINTF("No change\n"); 1006 return (0); 1007 } 1008 /* set stalled state */ 1009 ep->is_stalled = 1; 1010 1011 if (do_stall || (!was_stalled)) { 1012 if (!was_stalled) { 1013 for (x = 0; x != USB_MAX_EP_STREAMS; x++) { 1014 /* lookup the current USB transfer, if any */ 1015 xfer = ep->endpoint_q[x].curr; 1016 if (xfer != NULL) { 1017 /* 1018 * The "xfer_stall" method 1019 * will complete the USB 1020 * transfer like in case of a 1021 * timeout setting the error 1022 * code "USB_ERR_STALLED". 1023 */ 1024 (udev->bus->methods->xfer_stall) (xfer); 1025 } 1026 } 1027 } 1028 (udev->bus->methods->set_stall) (udev, ep, &do_stall); 1029 } 1030 if (!do_stall) { 1031 ep->toggle_next = 0; /* reset data toggle */ 1032 ep->is_stalled = 0; /* clear stalled state */ 1033 1034 (udev->bus->methods->clear_stall) (udev, ep); 1035 1036 /* start the current or next transfer, if any */ 1037 for (x = 0; x != USB_MAX_EP_STREAMS; x++) { 1038 usb_command_wrapper(&ep->endpoint_q[x], 1039 ep->endpoint_q[x].curr); 1040 } 1041 } 1042 USB_BUS_UNLOCK(udev->bus); 1043 return (0); 1044} 1045 1046/*------------------------------------------------------------------------* 1047 * usb_reset_iface_endpoints - used in USB device side mode 1048 *------------------------------------------------------------------------*/ 1049usb_error_t 1050usb_reset_iface_endpoints(struct usb_device *udev, uint8_t iface_index) 1051{ 1052 struct usb_endpoint *ep; 1053 struct usb_endpoint *ep_end; 1054 1055 ep = udev->endpoints; 1056 ep_end = udev->endpoints + udev->endpoints_max; 1057 1058 for (; ep != ep_end; ep++) { 1059 1060 if ((ep->edesc == NULL) || 1061 (ep->iface_index != iface_index)) { 1062 continue; 1063 } 1064 /* simulate a clear stall from the peer */ 1065 usbd_set_endpoint_stall(udev, ep, 0); 1066 } 1067 return (0); 1068} 1069 1070/*------------------------------------------------------------------------* 1071 * usb_detach_device_sub 1072 * 1073 * This function will try to detach an USB device. If it fails a panic 1074 * will result. 1075 * 1076 * Flag values, see "USB_UNCFG_FLAG_XXX". 1077 *------------------------------------------------------------------------*/ 1078static void 1079usb_detach_device_sub(struct usb_device *udev, device_t *ppdev, 1080 char **ppnpinfo, uint8_t flag) 1081{ 1082 device_t dev; 1083 char *pnpinfo; 1084 int err; 1085 1086 dev = *ppdev; 1087 if (dev) { 1088 /* 1089 * NOTE: It is important to clear "*ppdev" before deleting 1090 * the child due to some device methods being called late 1091 * during the delete process ! 1092 */ 1093 *ppdev = NULL; 1094 1095 if (!rebooting) { 1096 device_printf(dev, "at %s, port %d, addr %d " 1097 "(disconnected)\n", 1098 device_get_nameunit(udev->parent_dev), 1099 udev->port_no, udev->address); 1100 } 1101 1102 if (device_is_attached(dev)) { 1103 if (udev->flags.peer_suspended) { 1104 err = DEVICE_RESUME(dev); 1105 if (err) { 1106 device_printf(dev, "Resume failed\n"); 1107 } 1108 } 1109 if (device_detach(dev)) { 1110 goto error; 1111 } 1112 } 1113 if (device_delete_child(udev->parent_dev, dev)) { 1114 goto error; 1115 } 1116 } 1117 1118 pnpinfo = *ppnpinfo; 1119 if (pnpinfo != NULL) { 1120 *ppnpinfo = NULL; 1121 free(pnpinfo, M_USBDEV); 1122 } 1123 return; 1124 1125error: 1126 /* Detach is not allowed to fail in the USB world */ 1127 panic("usb_detach_device_sub: A USB driver would not detach\n"); 1128} 1129 1130/*------------------------------------------------------------------------* 1131 * usb_detach_device 1132 * 1133 * The following function will detach the matching interfaces. 1134 * This function is NULL safe. 1135 * 1136 * Flag values, see "USB_UNCFG_FLAG_XXX". 1137 *------------------------------------------------------------------------*/ 1138void 1139usb_detach_device(struct usb_device *udev, uint8_t iface_index, 1140 uint8_t flag) 1141{ 1142 struct usb_interface *iface; 1143 uint8_t i; 1144 1145 if (udev == NULL) { 1146 /* nothing to do */ 1147 return; 1148 } 1149 DPRINTFN(4, "udev=%p\n", udev); 1150 1151 sx_assert(&udev->enum_sx, SA_LOCKED); 1152 1153 /* 1154 * First detach the child to give the child's detach routine a 1155 * chance to detach the sub-devices in the correct order. 1156 * Then delete the child using "device_delete_child()" which 1157 * will detach all sub-devices from the bottom and upwards! 1158 */ 1159 if (iface_index != USB_IFACE_INDEX_ANY) { 1160 i = iface_index; 1161 iface_index = i + 1; 1162 } else { 1163 i = 0; 1164 iface_index = USB_IFACE_MAX; 1165 } 1166 1167 /* do the detach */ 1168 1169 for (; i != iface_index; i++) { 1170 1171 iface = usbd_get_iface(udev, i); 1172 if (iface == NULL) { 1173 /* looks like the end of the USB interfaces */ 1174 break; 1175 } 1176 usb_detach_device_sub(udev, &iface->subdev, 1177 &iface->pnpinfo, flag); 1178 } 1179} 1180 1181/*------------------------------------------------------------------------* 1182 * usb_probe_and_attach_sub 1183 * 1184 * Returns: 1185 * 0: Success 1186 * Else: Failure 1187 *------------------------------------------------------------------------*/ 1188static uint8_t 1189usb_probe_and_attach_sub(struct usb_device *udev, 1190 struct usb_attach_arg *uaa) 1191{ 1192 struct usb_interface *iface; 1193 device_t dev; 1194 int err; 1195 1196 iface = uaa->iface; 1197 if (iface->parent_iface_index != USB_IFACE_INDEX_ANY) { 1198 /* leave interface alone */ 1199 return (0); 1200 } 1201 dev = iface->subdev; 1202 if (dev) { 1203 1204 /* clean up after module unload */ 1205 1206 if (device_is_attached(dev)) { 1207 /* already a device there */ 1208 return (0); 1209 } 1210 /* clear "iface->subdev" as early as possible */ 1211 1212 iface->subdev = NULL; 1213 1214 if (device_delete_child(udev->parent_dev, dev)) { 1215 1216 /* 1217 * Panic here, else one can get a double call 1218 * to device_detach(). USB devices should 1219 * never fail on detach! 1220 */ 1221 panic("device_delete_child() failed\n"); 1222 } 1223 } 1224 if (uaa->temp_dev == NULL) { 1225 1226 /* create a new child */ 1227 uaa->temp_dev = device_add_child(udev->parent_dev, NULL, -1); 1228 if (uaa->temp_dev == NULL) { 1229 device_printf(udev->parent_dev, 1230 "Device creation failed\n"); 1231 return (1); /* failure */ 1232 } 1233 device_set_ivars(uaa->temp_dev, uaa); 1234 device_quiet(uaa->temp_dev); 1235 } 1236 /* 1237 * Set "subdev" before probe and attach so that "devd" gets 1238 * the information it needs. 1239 */ 1240 iface->subdev = uaa->temp_dev; 1241 1242 if (device_probe_and_attach(iface->subdev) == 0) { 1243 /* 1244 * The USB attach arguments are only available during probe 1245 * and attach ! 1246 */ 1247 uaa->temp_dev = NULL; 1248 device_set_ivars(iface->subdev, NULL); 1249 1250 if (udev->flags.peer_suspended) { 1251 err = DEVICE_SUSPEND(iface->subdev); 1252 if (err) 1253 device_printf(iface->subdev, "Suspend failed\n"); 1254 } 1255 return (0); /* success */ 1256 } else { 1257 /* No USB driver found */ 1258 iface->subdev = NULL; 1259 } 1260 return (1); /* failure */ 1261} 1262 1263/*------------------------------------------------------------------------* 1264 * usbd_set_parent_iface 1265 * 1266 * Using this function will lock the alternate interface setting on an 1267 * interface. It is typically used for multi interface drivers. In USB 1268 * device side mode it is assumed that the alternate interfaces all 1269 * have the same endpoint descriptors. The default parent index value 1270 * is "USB_IFACE_INDEX_ANY". Then the alternate setting value is not 1271 * locked. 1272 *------------------------------------------------------------------------*/ 1273void 1274usbd_set_parent_iface(struct usb_device *udev, uint8_t iface_index, 1275 uint8_t parent_index) 1276{ 1277 struct usb_interface *iface; 1278 1279 if (udev == NULL) { 1280 /* nothing to do */ 1281 return; 1282 } 1283 iface = usbd_get_iface(udev, iface_index); 1284 if (iface != NULL) 1285 iface->parent_iface_index = parent_index; 1286} 1287 1288static void 1289usb_init_attach_arg(struct usb_device *udev, 1290 struct usb_attach_arg *uaa) 1291{ 1292 memset(uaa, 0, sizeof(*uaa)); 1293 1294 uaa->device = udev; 1295 uaa->usb_mode = udev->flags.usb_mode; 1296 uaa->port = udev->port_no; 1297 uaa->dev_state = UAA_DEV_READY; 1298 1299 uaa->info.idVendor = UGETW(udev->ddesc.idVendor); 1300 uaa->info.idProduct = UGETW(udev->ddesc.idProduct); 1301 uaa->info.bcdDevice = UGETW(udev->ddesc.bcdDevice); 1302 uaa->info.bDeviceClass = udev->ddesc.bDeviceClass; 1303 uaa->info.bDeviceSubClass = udev->ddesc.bDeviceSubClass; 1304 uaa->info.bDeviceProtocol = udev->ddesc.bDeviceProtocol; 1305 uaa->info.bConfigIndex = udev->curr_config_index; 1306 uaa->info.bConfigNum = udev->curr_config_no; 1307} 1308 1309/*------------------------------------------------------------------------* 1310 * usb_probe_and_attach 1311 * 1312 * This function is called from "uhub_explore_sub()", 1313 * "usb_handle_set_config()" and "usb_handle_request()". 1314 * 1315 * Returns: 1316 * 0: Success 1317 * Else: A control transfer failed 1318 *------------------------------------------------------------------------*/ 1319usb_error_t 1320usb_probe_and_attach(struct usb_device *udev, uint8_t iface_index) 1321{ 1322 struct usb_attach_arg uaa; 1323 struct usb_interface *iface; 1324 uint8_t i; 1325 uint8_t j; 1326 uint8_t do_unlock; 1327 1328 if (udev == NULL) { 1329 DPRINTF("udev == NULL\n"); 1330 return (USB_ERR_INVAL); 1331 } 1332 /* Prevent re-enumeration */ 1333 do_unlock = usbd_enum_lock(udev); 1334 1335 if (udev->curr_config_index == USB_UNCONFIG_INDEX) { 1336 /* do nothing - no configuration has been set */ 1337 goto done; 1338 } 1339 /* setup USB attach arguments */ 1340 1341 usb_init_attach_arg(udev, &uaa); 1342 1343 /* 1344 * If the whole USB device is targeted, invoke the USB event 1345 * handler(s): 1346 */ 1347 if (iface_index == USB_IFACE_INDEX_ANY) { 1348 1349 if (usb_test_quirk(&uaa, UQ_MSC_DYMO_EJECT) != 0 && 1350 usb_dymo_eject(udev, 0) == 0) { 1351 /* success, mark the udev as disappearing */ 1352 uaa.dev_state = UAA_DEV_EJECTING; 1353 } 1354 1355 EVENTHANDLER_INVOKE(usb_dev_configured, udev, &uaa); 1356 1357 if (uaa.dev_state != UAA_DEV_READY) { 1358 /* leave device unconfigured */ 1359 usb_unconfigure(udev, 0); 1360 goto done; 1361 } 1362 } 1363 1364 /* Check if only one interface should be probed: */ 1365 if (iface_index != USB_IFACE_INDEX_ANY) { 1366 i = iface_index; 1367 j = i + 1; 1368 } else { 1369 i = 0; 1370 j = USB_IFACE_MAX; 1371 } 1372 1373 /* Do the probe and attach */ 1374 for (; i != j; i++) { 1375 1376 iface = usbd_get_iface(udev, i); 1377 if (iface == NULL) { 1378 /* 1379 * Looks like the end of the USB 1380 * interfaces ! 1381 */ 1382 DPRINTFN(2, "end of interfaces " 1383 "at %u\n", i); 1384 break; 1385 } 1386 if (iface->idesc == NULL) { 1387 /* no interface descriptor */ 1388 continue; 1389 } 1390 uaa.iface = iface; 1391 1392 uaa.info.bInterfaceClass = 1393 iface->idesc->bInterfaceClass; 1394 uaa.info.bInterfaceSubClass = 1395 iface->idesc->bInterfaceSubClass; 1396 uaa.info.bInterfaceProtocol = 1397 iface->idesc->bInterfaceProtocol; 1398 uaa.info.bIfaceIndex = i; 1399 uaa.info.bIfaceNum = 1400 iface->idesc->bInterfaceNumber; 1401 uaa.driver_info = 0; /* reset driver_info */ 1402 1403 DPRINTFN(2, "iclass=%u/%u/%u iindex=%u/%u\n", 1404 uaa.info.bInterfaceClass, 1405 uaa.info.bInterfaceSubClass, 1406 uaa.info.bInterfaceProtocol, 1407 uaa.info.bIfaceIndex, 1408 uaa.info.bIfaceNum); 1409 1410 usb_probe_and_attach_sub(udev, &uaa); 1411 1412 /* 1413 * Remove the leftover child, if any, to enforce that 1414 * a new nomatch devd event is generated for the next 1415 * interface if no driver is found: 1416 */ 1417 if (uaa.temp_dev == NULL) 1418 continue; 1419 if (device_delete_child(udev->parent_dev, uaa.temp_dev)) 1420 DPRINTFN(0, "device delete child failed\n"); 1421 uaa.temp_dev = NULL; 1422 } 1423done: 1424 if (do_unlock) 1425 usbd_enum_unlock(udev); 1426 return (0); 1427} 1428 1429/*------------------------------------------------------------------------* 1430 * usb_suspend_resume_sub 1431 * 1432 * This function is called when the suspend or resume methods should 1433 * be executed on an USB device. 1434 *------------------------------------------------------------------------*/ 1435static void 1436usb_suspend_resume_sub(struct usb_device *udev, device_t dev, uint8_t do_suspend) 1437{ 1438 int err; 1439 1440 if (dev == NULL) { 1441 return; 1442 } 1443 if (!device_is_attached(dev)) { 1444 return; 1445 } 1446 if (do_suspend) { 1447 err = DEVICE_SUSPEND(dev); 1448 } else { 1449 err = DEVICE_RESUME(dev); 1450 } 1451 if (err) { 1452 device_printf(dev, "%s failed\n", 1453 do_suspend ? "Suspend" : "Resume"); 1454 } 1455} 1456 1457/*------------------------------------------------------------------------* 1458 * usb_suspend_resume 1459 * 1460 * The following function will suspend or resume the USB device. 1461 * 1462 * Returns: 1463 * 0: Success 1464 * Else: Failure 1465 *------------------------------------------------------------------------*/ 1466usb_error_t 1467usb_suspend_resume(struct usb_device *udev, uint8_t do_suspend) 1468{ 1469 struct usb_interface *iface; 1470 uint8_t i; 1471 1472 if (udev == NULL) { 1473 /* nothing to do */ 1474 return (0); 1475 } 1476 DPRINTFN(4, "udev=%p do_suspend=%d\n", udev, do_suspend); 1477 1478 sx_assert(&udev->sr_sx, SA_LOCKED); 1479 1480 USB_BUS_LOCK(udev->bus); 1481 /* filter the suspend events */ 1482 if (udev->flags.peer_suspended == do_suspend) { 1483 USB_BUS_UNLOCK(udev->bus); 1484 /* nothing to do */ 1485 return (0); 1486 } 1487 udev->flags.peer_suspended = do_suspend; 1488 USB_BUS_UNLOCK(udev->bus); 1489 1490 /* do the suspend or resume */ 1491 1492 for (i = 0; i != USB_IFACE_MAX; i++) { 1493 1494 iface = usbd_get_iface(udev, i); 1495 if (iface == NULL) { 1496 /* looks like the end of the USB interfaces */ 1497 break; 1498 } 1499 usb_suspend_resume_sub(udev, iface->subdev, do_suspend); 1500 } 1501 return (0); 1502} 1503 1504/*------------------------------------------------------------------------* 1505 * usbd_clear_stall_proc 1506 * 1507 * This function performs generic USB clear stall operations. 1508 *------------------------------------------------------------------------*/ 1509static void 1510usbd_clear_stall_proc(struct usb_proc_msg *_pm) 1511{ 1512 struct usb_udev_msg *pm = (void *)_pm; 1513 struct usb_device *udev = pm->udev; 1514 1515 /* Change lock */ 1516 USB_BUS_UNLOCK(udev->bus); 1517 mtx_lock(&udev->device_mtx); 1518 1519 /* Start clear stall callback */ 1520 usbd_transfer_start(udev->ctrl_xfer[1]); 1521 1522 /* Change lock */ 1523 mtx_unlock(&udev->device_mtx); 1524 USB_BUS_LOCK(udev->bus); 1525} 1526 1527/*------------------------------------------------------------------------* 1528 * usb_alloc_device 1529 * 1530 * This function allocates a new USB device. This function is called 1531 * when a new device has been put in the powered state, but not yet in 1532 * the addressed state. Get initial descriptor, set the address, get 1533 * full descriptor and get strings. 1534 * 1535 * Return values: 1536 * 0: Failure 1537 * Else: Success 1538 *------------------------------------------------------------------------*/ 1539struct usb_device * 1540usb_alloc_device(device_t parent_dev, struct usb_bus *bus, 1541 struct usb_device *parent_hub, uint8_t depth, uint8_t port_index, 1542 uint8_t port_no, enum usb_dev_speed speed, enum usb_hc_mode mode) 1543{ 1544 struct usb_attach_arg uaa; 1545 struct usb_device *udev; 1546 struct usb_device *adev; 1547 struct usb_device *hub; 1548 uint8_t *scratch_ptr; 1549 usb_error_t err; 1550 uint8_t device_index; 1551 uint8_t config_index; 1552 uint8_t config_quirk; 1553 uint8_t set_config_failed; 1554 uint8_t do_unlock; 1555 1556 DPRINTF("parent_dev=%p, bus=%p, parent_hub=%p, depth=%u, " 1557 "port_index=%u, port_no=%u, speed=%u, usb_mode=%u\n", 1558 parent_dev, bus, parent_hub, depth, port_index, port_no, 1559 speed, mode); 1560 1561 /* 1562 * Find an unused device index. In USB Host mode this is the 1563 * same as the device address. 1564 * 1565 * Device index zero is not used and device index 1 should 1566 * always be the root hub. 1567 */ 1568 for (device_index = USB_ROOT_HUB_ADDR; 1569 (device_index != bus->devices_max) && 1570 (bus->devices[device_index] != NULL); 1571 device_index++) /* nop */; 1572 1573 if (device_index == bus->devices_max) { 1574 device_printf(bus->bdev, 1575 "No free USB device index for new device\n"); 1576 return (NULL); 1577 } 1578 1579 if (depth > 0x10) { 1580 device_printf(bus->bdev, 1581 "Invalid device depth\n"); 1582 return (NULL); 1583 } 1584 udev = malloc(sizeof(*udev), M_USB, M_WAITOK | M_ZERO); 1585 if (udev == NULL) { 1586 return (NULL); 1587 } 1588 /* initialise our SX-lock */ 1589 sx_init_flags(&udev->enum_sx, "USB config SX lock", SX_DUPOK); 1590 sx_init_flags(&udev->sr_sx, "USB suspend and resume SX lock", SX_NOWITNESS); 1591 1592 cv_init(&udev->ctrlreq_cv, "WCTRL"); 1593 cv_init(&udev->ref_cv, "UGONE"); 1594 1595 /* initialise our mutex */ 1596 mtx_init(&udev->device_mtx, "USB device mutex", NULL, MTX_DEF); 1597 1598 /* initialise generic clear stall */ 1599 udev->cs_msg[0].hdr.pm_callback = &usbd_clear_stall_proc; 1600 udev->cs_msg[0].udev = udev; 1601 udev->cs_msg[1].hdr.pm_callback = &usbd_clear_stall_proc; 1602 udev->cs_msg[1].udev = udev; 1603 1604 /* initialise some USB device fields */ 1605 udev->parent_hub = parent_hub; 1606 udev->parent_dev = parent_dev; 1607 udev->port_index = port_index; 1608 udev->port_no = port_no; 1609 udev->depth = depth; 1610 udev->bus = bus; 1611 udev->address = USB_START_ADDR; /* default value */ 1612 udev->plugtime = (usb_ticks_t)ticks; 1613 /* 1614 * We need to force the power mode to "on" because there are plenty 1615 * of USB devices out there that do not work very well with 1616 * automatic suspend and resume! 1617 */ 1618 udev->power_mode = usbd_filter_power_mode(udev, USB_POWER_MODE_ON); 1619 udev->pwr_save.last_xfer_time = ticks; 1620 /* we are not ready yet */ 1621 udev->refcount = 1; 1622 1623 /* set up default endpoint descriptor */ 1624 udev->ctrl_ep_desc.bLength = sizeof(udev->ctrl_ep_desc); 1625 udev->ctrl_ep_desc.bDescriptorType = UDESC_ENDPOINT; 1626 udev->ctrl_ep_desc.bEndpointAddress = USB_CONTROL_ENDPOINT; 1627 udev->ctrl_ep_desc.bmAttributes = UE_CONTROL; 1628 udev->ctrl_ep_desc.wMaxPacketSize[0] = USB_MAX_IPACKET; 1629 udev->ctrl_ep_desc.wMaxPacketSize[1] = 0; 1630 udev->ctrl_ep_desc.bInterval = 0; 1631 1632 /* set up default endpoint companion descriptor */ 1633 udev->ctrl_ep_comp_desc.bLength = sizeof(udev->ctrl_ep_comp_desc); 1634 udev->ctrl_ep_comp_desc.bDescriptorType = UDESC_ENDPOINT_SS_COMP; 1635 1636 udev->ddesc.bMaxPacketSize = USB_MAX_IPACKET; 1637 1638 udev->speed = speed; 1639 udev->flags.usb_mode = mode; 1640 1641 /* search for our High Speed USB HUB, if any */ 1642 1643 adev = udev; 1644 hub = udev->parent_hub; 1645 1646 while (hub) { 1647 if (hub->speed == USB_SPEED_HIGH) { 1648 udev->hs_hub_addr = hub->address; 1649 udev->parent_hs_hub = hub; 1650 udev->hs_port_no = adev->port_no; 1651 break; 1652 } 1653 adev = hub; 1654 hub = hub->parent_hub; 1655 } 1656 1657 /* init the default endpoint */ 1658 usb_init_endpoint(udev, 0, 1659 &udev->ctrl_ep_desc, 1660 &udev->ctrl_ep_comp_desc, 1661 &udev->ctrl_ep); 1662 1663 /* set device index */ 1664 udev->device_index = device_index; 1665 1666#if USB_HAVE_UGEN 1667 /* Create ugen name */ 1668 snprintf(udev->ugen_name, sizeof(udev->ugen_name), 1669 USB_GENERIC_NAME "%u.%u", device_get_unit(bus->bdev), 1670 device_index); 1671 LIST_INIT(&udev->pd_list); 1672 1673 /* Create the control endpoint device */ 1674 udev->ctrl_dev = usb_make_dev(udev, NULL, 0, 0, 1675 FREAD|FWRITE, UID_ROOT, GID_OPERATOR, 0600); 1676 1677 /* Create a link from /dev/ugenX.X to the default endpoint */ 1678 if (udev->ctrl_dev != NULL) 1679 make_dev_alias(udev->ctrl_dev->cdev, "%s", udev->ugen_name); 1680#endif 1681 /* Initialise device */ 1682 if (bus->methods->device_init != NULL) { 1683 err = (bus->methods->device_init) (udev); 1684 if (err != 0) { 1685 DPRINTFN(0, "device init %d failed " 1686 "(%s, ignored)\n", device_index, 1687 usbd_errstr(err)); 1688 goto done; 1689 } 1690 } 1691 /* set powered device state after device init is complete */ 1692 usb_set_device_state(udev, USB_STATE_POWERED); 1693 1694 if (udev->flags.usb_mode == USB_MODE_HOST) { 1695 1696 err = usbd_req_set_address(udev, NULL, device_index); 1697 1698 /* 1699 * This is the new USB device address from now on, if 1700 * the set address request didn't set it already. 1701 */ 1702 if (udev->address == USB_START_ADDR) 1703 udev->address = device_index; 1704 1705 /* 1706 * We ignore any set-address errors, hence there are 1707 * buggy USB devices out there that actually receive 1708 * the SETUP PID, but manage to set the address before 1709 * the STATUS stage is ACK'ed. If the device responds 1710 * to the subsequent get-descriptor at the new 1711 * address, then we know that the set-address command 1712 * was successful. 1713 */ 1714 if (err) { 1715 DPRINTFN(0, "set address %d failed " 1716 "(%s, ignored)\n", udev->address, 1717 usbd_errstr(err)); 1718 } 1719 } else { 1720 /* We are not self powered */ 1721 udev->flags.self_powered = 0; 1722 1723 /* Set unconfigured state */ 1724 udev->curr_config_no = USB_UNCONFIG_NO; 1725 udev->curr_config_index = USB_UNCONFIG_INDEX; 1726 1727 /* Setup USB descriptors */ 1728 err = (usb_temp_setup_by_index_p) (udev, usb_template); 1729 if (err) { 1730 DPRINTFN(0, "setting up USB template failed maybe the USB " 1731 "template module has not been loaded\n"); 1732 goto done; 1733 } 1734 } 1735 usb_set_device_state(udev, USB_STATE_ADDRESSED); 1736 1737 /* setup the device descriptor and the initial "wMaxPacketSize" */ 1738 err = usbd_setup_device_desc(udev, NULL); 1739 1740 if (err != 0) { 1741 /* try to enumerate two more times */ 1742 err = usbd_req_re_enumerate(udev, NULL); 1743 if (err != 0) { 1744 err = usbd_req_re_enumerate(udev, NULL); 1745 if (err != 0) { 1746 goto done; 1747 } 1748 } 1749 } 1750 1751 /* 1752 * Setup temporary USB attach args so that we can figure out some 1753 * basic quirks for this device. 1754 */ 1755 usb_init_attach_arg(udev, &uaa); 1756 1757 if (usb_test_quirk(&uaa, UQ_BUS_POWERED)) { 1758 udev->flags.uq_bus_powered = 1; 1759 } 1760 if (usb_test_quirk(&uaa, UQ_NO_STRINGS)) { 1761 udev->flags.no_strings = 1; 1762 } 1763 /* 1764 * Workaround for buggy USB devices. 1765 * 1766 * It appears that some string-less USB chips will crash and 1767 * disappear if any attempts are made to read any string 1768 * descriptors. 1769 * 1770 * Try to detect such chips by checking the strings in the USB 1771 * device descriptor. If no strings are present there we 1772 * simply disable all USB strings. 1773 */ 1774 1775 /* Protect scratch area */ 1776 do_unlock = usbd_enum_lock(udev); 1777 1778 scratch_ptr = udev->scratch.data; 1779 1780 if (udev->ddesc.iManufacturer || 1781 udev->ddesc.iProduct || 1782 udev->ddesc.iSerialNumber) { 1783 /* read out the language ID string */ 1784 err = usbd_req_get_string_desc(udev, NULL, 1785 (char *)scratch_ptr, 4, 0, USB_LANGUAGE_TABLE); 1786 } else { 1787 err = USB_ERR_INVAL; 1788 } 1789 1790 if (err || (scratch_ptr[0] < 4)) { 1791 udev->flags.no_strings = 1; 1792 } else { 1793 uint16_t langid; 1794 uint16_t pref; 1795 uint16_t mask; 1796 uint8_t x; 1797 1798 /* load preferred value and mask */ 1799 pref = usb_lang_id; 1800 mask = usb_lang_mask; 1801 1802 /* align length correctly */ 1803 scratch_ptr[0] &= ~1U; 1804 1805 /* fix compiler warning */ 1806 langid = 0; 1807 1808 /* search for preferred language */ 1809 for (x = 2; (x < scratch_ptr[0]); x += 2) { 1810 langid = UGETW(scratch_ptr + x); 1811 if ((langid & mask) == pref) 1812 break; 1813 } 1814 if (x >= scratch_ptr[0]) { 1815 /* pick the first language as the default */ 1816 DPRINTFN(1, "Using first language\n"); 1817 langid = UGETW(scratch_ptr + 2); 1818 } 1819 1820 DPRINTFN(1, "Language selected: 0x%04x\n", langid); 1821 udev->langid = langid; 1822 } 1823 1824 if (do_unlock) 1825 usbd_enum_unlock(udev); 1826 1827 /* assume 100mA bus powered for now. Changed when configured. */ 1828 udev->power = USB_MIN_POWER; 1829 /* fetch the vendor and product strings from the device */ 1830 usbd_set_device_strings(udev); 1831 1832 if (udev->flags.usb_mode == USB_MODE_DEVICE) { 1833 /* USB device mode setup is complete */ 1834 err = 0; 1835 goto config_done; 1836 } 1837 1838 /* 1839 * Most USB devices should attach to config index 0 by 1840 * default 1841 */ 1842 if (usb_test_quirk(&uaa, UQ_CFG_INDEX_0)) { 1843 config_index = 0; 1844 config_quirk = 1; 1845 } else if (usb_test_quirk(&uaa, UQ_CFG_INDEX_1)) { 1846 config_index = 1; 1847 config_quirk = 1; 1848 } else if (usb_test_quirk(&uaa, UQ_CFG_INDEX_2)) { 1849 config_index = 2; 1850 config_quirk = 1; 1851 } else if (usb_test_quirk(&uaa, UQ_CFG_INDEX_3)) { 1852 config_index = 3; 1853 config_quirk = 1; 1854 } else if (usb_test_quirk(&uaa, UQ_CFG_INDEX_4)) { 1855 config_index = 4; 1856 config_quirk = 1; 1857 } else { 1858 config_index = 0; 1859 config_quirk = 0; 1860 } 1861 1862 set_config_failed = 0; 1863repeat_set_config: 1864 1865 DPRINTF("setting config %u\n", config_index); 1866 1867 /* get the USB device configured */ 1868 err = usbd_set_config_index(udev, config_index); 1869 if (err) { 1870 if (udev->ddesc.bNumConfigurations != 0) { 1871 if (!set_config_failed) { 1872 set_config_failed = 1; 1873 /* XXX try to re-enumerate the device */ 1874 err = usbd_req_re_enumerate(udev, NULL); 1875 if (err == 0) 1876 goto repeat_set_config; 1877 } 1878 DPRINTFN(0, "Failure selecting configuration index %u:" 1879 "%s, port %u, addr %u (ignored)\n", 1880 config_index, usbd_errstr(err), udev->port_no, 1881 udev->address); 1882 } 1883 /* 1884 * Some USB devices do not have any configurations. Ignore any 1885 * set config failures! 1886 */ 1887 err = 0; 1888 goto config_done; 1889 } 1890 if (!config_quirk && config_index + 1 < udev->ddesc.bNumConfigurations) { 1891 if ((udev->cdesc->bNumInterface < 2) && 1892 usbd_get_no_descriptors(udev->cdesc, UDESC_ENDPOINT) == 0) { 1893 DPRINTFN(0, "Found no endpoints, trying next config\n"); 1894 config_index++; 1895 goto repeat_set_config; 1896 } 1897#if USB_HAVE_MSCTEST 1898 if (config_index == 0) { 1899 /* 1900 * Try to figure out if we have an 1901 * auto-install disk there: 1902 */ 1903 if (usb_iface_is_cdrom(udev, 0)) { 1904 DPRINTFN(0, "Found possible auto-install " 1905 "disk (trying next config)\n"); 1906 config_index++; 1907 goto repeat_set_config; 1908 } 1909 } 1910#endif 1911 } 1912#if USB_HAVE_MSCTEST 1913 if (set_config_failed == 0 && config_index == 0 && 1914 usb_test_quirk(&uaa, UQ_MSC_NO_SYNC_CACHE) == 0 && 1915 usb_test_quirk(&uaa, UQ_MSC_NO_GETMAXLUN) == 0) { 1916 1917 /* 1918 * Try to figure out if there are any MSC quirks we 1919 * should apply automatically: 1920 */ 1921 err = usb_msc_auto_quirk(udev, 0); 1922 1923 if (err != 0) { 1924 set_config_failed = 1; 1925 goto repeat_set_config; 1926 } 1927 } 1928#endif 1929 1930config_done: 1931 DPRINTF("new dev (addr %d), udev=%p, parent_hub=%p\n", 1932 udev->address, udev, udev->parent_hub); 1933 1934 /* register our device - we are ready */ 1935 usb_bus_port_set_device(bus, parent_hub ? 1936 parent_hub->hub->ports + port_index : NULL, udev, device_index); 1937 1938#if USB_HAVE_UGEN 1939 /* Symlink the ugen device name */ 1940 udev->ugen_symlink = usb_alloc_symlink(udev->ugen_name); 1941 1942 /* Announce device */ 1943 printf("%s: <%s> at %s\n", udev->ugen_name, 1944 usb_get_manufacturer(udev), 1945 device_get_nameunit(udev->bus->bdev)); 1946#endif 1947 1948#if USB_HAVE_DEVCTL 1949 usb_notify_addq("ATTACH", udev); 1950#endif 1951done: 1952 if (err) { 1953 /* 1954 * Free USB device and all subdevices, if any. 1955 */ 1956 usb_free_device(udev, 0); 1957 udev = NULL; 1958 } 1959 return (udev); 1960} 1961 1962#if USB_HAVE_UGEN 1963struct usb_fs_privdata * 1964usb_make_dev(struct usb_device *udev, const char *devname, int ep, 1965 int fi, int rwmode, uid_t uid, gid_t gid, int mode) 1966{ 1967 struct usb_fs_privdata* pd; 1968 char buffer[32]; 1969 1970 /* Store information to locate ourselves again later */ 1971 pd = malloc(sizeof(struct usb_fs_privdata), M_USBDEV, 1972 M_WAITOK | M_ZERO); 1973 pd->bus_index = device_get_unit(udev->bus->bdev); 1974 pd->dev_index = udev->device_index; 1975 pd->ep_addr = ep; 1976 pd->fifo_index = fi; 1977 pd->mode = rwmode; 1978 1979 /* Now, create the device itself */ 1980 if (devname == NULL) { 1981 devname = buffer; 1982 snprintf(buffer, sizeof(buffer), USB_DEVICE_DIR "/%u.%u.%u", 1983 pd->bus_index, pd->dev_index, pd->ep_addr); 1984 } 1985 1986 pd->cdev = make_dev(&usb_devsw, 0, uid, gid, mode, "%s", devname); 1987 1988 if (pd->cdev == NULL) { 1989 DPRINTFN(0, "Failed to create device %s\n", devname); 1990 free(pd, M_USBDEV); 1991 return (NULL); 1992 } 1993 1994 /* XXX setting si_drv1 and creating the device is not atomic! */ 1995 pd->cdev->si_drv1 = pd; 1996 1997 return (pd); 1998} 1999 2000void 2001usb_destroy_dev_sync(struct usb_fs_privdata *pd) 2002{ 2003 DPRINTFN(1, "Destroying device at ugen%d.%d\n", 2004 pd->bus_index, pd->dev_index); 2005 2006 /* 2007 * Destroy character device synchronously. After this 2008 * all system calls are returned. Can block. 2009 */ 2010 destroy_dev(pd->cdev); 2011 2012 free(pd, M_USBDEV); 2013} 2014 2015void 2016usb_destroy_dev(struct usb_fs_privdata *pd) 2017{ 2018 struct usb_bus *bus; 2019 2020 if (pd == NULL) 2021 return; 2022 2023 mtx_lock(&usb_ref_lock); 2024 bus = devclass_get_softc(usb_devclass_ptr, pd->bus_index); 2025 mtx_unlock(&usb_ref_lock); 2026 2027 if (bus == NULL) { 2028 usb_destroy_dev_sync(pd); 2029 return; 2030 } 2031 2032 /* make sure we can re-use the device name */ 2033 delist_dev(pd->cdev); 2034 2035 USB_BUS_LOCK(bus); 2036 LIST_INSERT_HEAD(&bus->pd_cleanup_list, pd, pd_next); 2037 /* get cleanup going */ 2038 usb_proc_msignal(USB_BUS_EXPLORE_PROC(bus), 2039 &bus->cleanup_msg[0], &bus->cleanup_msg[1]); 2040 USB_BUS_UNLOCK(bus); 2041} 2042 2043static void 2044usb_cdev_create(struct usb_device *udev) 2045{ 2046 struct usb_config_descriptor *cd; 2047 struct usb_endpoint_descriptor *ed; 2048 struct usb_descriptor *desc; 2049 struct usb_fs_privdata* pd; 2050 int inmode, outmode, inmask, outmask, mode; 2051 uint8_t ep; 2052 2053 KASSERT(LIST_FIRST(&udev->pd_list) == NULL, ("stale cdev entries")); 2054 2055 DPRINTFN(2, "Creating device nodes\n"); 2056 2057 if (usbd_get_mode(udev) == USB_MODE_DEVICE) { 2058 inmode = FWRITE; 2059 outmode = FREAD; 2060 } else { /* USB_MODE_HOST */ 2061 inmode = FREAD; 2062 outmode = FWRITE; 2063 } 2064 2065 inmask = 0; 2066 outmask = 0; 2067 desc = NULL; 2068 2069 /* 2070 * Collect all used endpoint numbers instead of just 2071 * generating 16 static endpoints. 2072 */ 2073 cd = usbd_get_config_descriptor(udev); 2074 while ((desc = usb_desc_foreach(cd, desc))) { 2075 /* filter out all endpoint descriptors */ 2076 if ((desc->bDescriptorType == UDESC_ENDPOINT) && 2077 (desc->bLength >= sizeof(*ed))) { 2078 ed = (struct usb_endpoint_descriptor *)desc; 2079 2080 /* update masks */ 2081 ep = ed->bEndpointAddress; 2082 if (UE_GET_DIR(ep) == UE_DIR_OUT) 2083 outmask |= 1 << UE_GET_ADDR(ep); 2084 else 2085 inmask |= 1 << UE_GET_ADDR(ep); 2086 } 2087 } 2088 2089 /* Create all available endpoints except EP0 */ 2090 for (ep = 1; ep < 16; ep++) { 2091 mode = (inmask & (1 << ep)) ? inmode : 0; 2092 mode |= (outmask & (1 << ep)) ? outmode : 0; 2093 if (mode == 0) 2094 continue; /* no IN or OUT endpoint */ 2095 2096 pd = usb_make_dev(udev, NULL, ep, 0, 2097 mode, UID_ROOT, GID_OPERATOR, 0600); 2098 2099 if (pd != NULL) 2100 LIST_INSERT_HEAD(&udev->pd_list, pd, pd_next); 2101 } 2102} 2103 2104static void 2105usb_cdev_free(struct usb_device *udev) 2106{ 2107 struct usb_fs_privdata* pd; 2108 2109 DPRINTFN(2, "Freeing device nodes\n"); 2110 2111 while ((pd = LIST_FIRST(&udev->pd_list)) != NULL) { 2112 KASSERT(pd->cdev->si_drv1 == pd, ("privdata corrupt")); 2113 2114 LIST_REMOVE(pd, pd_next); 2115 2116 usb_destroy_dev(pd); 2117 } 2118} 2119#endif 2120 2121/*------------------------------------------------------------------------* 2122 * usb_free_device 2123 * 2124 * This function is NULL safe and will free an USB device and its 2125 * children devices, if any. 2126 * 2127 * Flag values: Reserved, set to zero. 2128 *------------------------------------------------------------------------*/ 2129void 2130usb_free_device(struct usb_device *udev, uint8_t flag) 2131{ 2132 struct usb_bus *bus; 2133 2134 if (udev == NULL) 2135 return; /* already freed */ 2136 2137 DPRINTFN(4, "udev=%p port=%d\n", udev, udev->port_no); 2138 2139 bus = udev->bus; 2140 2141 /* set DETACHED state to prevent any further references */ 2142 usb_set_device_state(udev, USB_STATE_DETACHED); 2143 2144#if USB_HAVE_DEVCTL 2145 usb_notify_addq("DETACH", udev); 2146#endif 2147 2148#if USB_HAVE_UGEN 2149 if (!rebooting) { 2150 printf("%s: <%s> at %s (disconnected)\n", udev->ugen_name, 2151 usb_get_manufacturer(udev), device_get_nameunit(bus->bdev)); 2152 } 2153 2154 /* Destroy UGEN symlink, if any */ 2155 if (udev->ugen_symlink) { 2156 usb_free_symlink(udev->ugen_symlink); 2157 udev->ugen_symlink = NULL; 2158 } 2159 2160 usb_destroy_dev(udev->ctrl_dev); 2161#endif 2162 2163 if (udev->flags.usb_mode == USB_MODE_DEVICE) { 2164 /* stop receiving any control transfers (Device Side Mode) */ 2165 usbd_transfer_unsetup(udev->ctrl_xfer, USB_CTRL_XFER_MAX); 2166 } 2167 2168 /* the following will get the device unconfigured in software */ 2169 usb_unconfigure(udev, USB_UNCFG_FLAG_FREE_EP0); 2170 2171 /* final device unregister after all character devices are closed */ 2172 usb_bus_port_set_device(bus, udev->parent_hub ? 2173 udev->parent_hub->hub->ports + udev->port_index : NULL, 2174 NULL, USB_ROOT_HUB_ADDR); 2175 2176 /* unsetup any leftover default USB transfers */ 2177 usbd_transfer_unsetup(udev->ctrl_xfer, USB_CTRL_XFER_MAX); 2178 2179 /* template unsetup, if any */ 2180 (usb_temp_unsetup_p) (udev); 2181 2182 /* 2183 * Make sure that our clear-stall messages are not queued 2184 * anywhere: 2185 */ 2186 USB_BUS_LOCK(udev->bus); 2187 usb_proc_mwait(USB_BUS_CS_PROC(udev->bus), 2188 &udev->cs_msg[0], &udev->cs_msg[1]); 2189 USB_BUS_UNLOCK(udev->bus); 2190 2191 /* wait for all references to go away */ 2192 usb_wait_pending_refs(udev); 2193 2194 sx_destroy(&udev->enum_sx); 2195 sx_destroy(&udev->sr_sx); 2196 2197 cv_destroy(&udev->ctrlreq_cv); 2198 cv_destroy(&udev->ref_cv); 2199 2200 mtx_destroy(&udev->device_mtx); 2201#if USB_HAVE_UGEN 2202 KASSERT(LIST_FIRST(&udev->pd_list) == NULL, ("leaked cdev entries")); 2203#endif 2204 2205 /* Uninitialise device */ 2206 if (bus->methods->device_uninit != NULL) 2207 (bus->methods->device_uninit) (udev); 2208 2209 /* free device */ 2210 free(udev->serial, M_USB); 2211 free(udev->manufacturer, M_USB); 2212 free(udev->product, M_USB); 2213 free(udev, M_USB); 2214} 2215 2216/*------------------------------------------------------------------------* 2217 * usbd_get_iface 2218 * 2219 * This function is the safe way to get the USB interface structure 2220 * pointer by interface index. 2221 * 2222 * Return values: 2223 * NULL: Interface not present. 2224 * Else: Pointer to USB interface structure. 2225 *------------------------------------------------------------------------*/ 2226struct usb_interface * 2227usbd_get_iface(struct usb_device *udev, uint8_t iface_index) 2228{ 2229 struct usb_interface *iface = udev->ifaces + iface_index; 2230 2231 if (iface_index >= udev->ifaces_max) 2232 return (NULL); 2233 return (iface); 2234} 2235 2236/*------------------------------------------------------------------------* 2237 * usbd_find_descriptor 2238 * 2239 * This function will lookup the first descriptor that matches the 2240 * criteria given by the arguments "type" and "subtype". Descriptors 2241 * will only be searched within the interface having the index 2242 * "iface_index". If the "id" argument points to an USB descriptor, 2243 * it will be skipped before the search is started. This allows 2244 * searching for multiple descriptors using the same criteria. Else 2245 * the search is started after the interface descriptor. 2246 * 2247 * Return values: 2248 * NULL: End of descriptors 2249 * Else: A descriptor matching the criteria 2250 *------------------------------------------------------------------------*/ 2251void * 2252usbd_find_descriptor(struct usb_device *udev, void *id, uint8_t iface_index, 2253 uint8_t type, uint8_t type_mask, 2254 uint8_t subtype, uint8_t subtype_mask) 2255{ 2256 struct usb_descriptor *desc; 2257 struct usb_config_descriptor *cd; 2258 struct usb_interface *iface; 2259 2260 cd = usbd_get_config_descriptor(udev); 2261 if (cd == NULL) { 2262 return (NULL); 2263 } 2264 if (id == NULL) { 2265 iface = usbd_get_iface(udev, iface_index); 2266 if (iface == NULL) { 2267 return (NULL); 2268 } 2269 id = usbd_get_interface_descriptor(iface); 2270 if (id == NULL) { 2271 return (NULL); 2272 } 2273 } 2274 desc = (void *)id; 2275 2276 while ((desc = usb_desc_foreach(cd, desc))) { 2277 2278 if (desc->bDescriptorType == UDESC_INTERFACE) { 2279 break; 2280 } 2281 if (((desc->bDescriptorType & type_mask) == type) && 2282 ((desc->bDescriptorSubtype & subtype_mask) == subtype)) { 2283 return (desc); 2284 } 2285 } 2286 return (NULL); 2287} 2288 2289/*------------------------------------------------------------------------* 2290 * usb_devinfo 2291 * 2292 * This function will dump information from the device descriptor 2293 * belonging to the USB device pointed to by "udev", to the string 2294 * pointed to by "dst_ptr" having a maximum length of "dst_len" bytes 2295 * including the terminating zero. 2296 *------------------------------------------------------------------------*/ 2297void 2298usb_devinfo(struct usb_device *udev, char *dst_ptr, uint16_t dst_len) 2299{ 2300 struct usb_device_descriptor *udd = &udev->ddesc; 2301 uint16_t bcdDevice; 2302 uint16_t bcdUSB; 2303 2304 bcdUSB = UGETW(udd->bcdUSB); 2305 bcdDevice = UGETW(udd->bcdDevice); 2306 2307 if (udd->bDeviceClass != 0xFF) { 2308 snprintf(dst_ptr, dst_len, "%s %s, class %d/%d, rev %x.%02x/" 2309 "%x.%02x, addr %d", 2310 usb_get_manufacturer(udev), 2311 usb_get_product(udev), 2312 udd->bDeviceClass, udd->bDeviceSubClass, 2313 (bcdUSB >> 8), bcdUSB & 0xFF, 2314 (bcdDevice >> 8), bcdDevice & 0xFF, 2315 udev->address); 2316 } else { 2317 snprintf(dst_ptr, dst_len, "%s %s, rev %x.%02x/" 2318 "%x.%02x, addr %d", 2319 usb_get_manufacturer(udev), 2320 usb_get_product(udev), 2321 (bcdUSB >> 8), bcdUSB & 0xFF, 2322 (bcdDevice >> 8), bcdDevice & 0xFF, 2323 udev->address); 2324 } 2325} 2326 2327#ifdef USB_VERBOSE 2328/* 2329 * Descriptions of of known vendors and devices ("products"). 2330 */ 2331struct usb_knowndev { 2332 uint16_t vendor; 2333 uint16_t product; 2334 uint32_t flags; 2335 const char *vendorname; 2336 const char *productname; 2337}; 2338 2339#define USB_KNOWNDEV_NOPROD 0x01 /* match on vendor only */ 2340 2341#include "usbdevs.h" 2342#include "usbdevs_data.h" 2343#endif /* USB_VERBOSE */ 2344 2345static void 2346usbd_set_device_strings(struct usb_device *udev) 2347{ 2348 struct usb_device_descriptor *udd = &udev->ddesc; 2349#ifdef USB_VERBOSE 2350 const struct usb_knowndev *kdp; 2351#endif 2352 char *temp_ptr; 2353 size_t temp_size; 2354 uint16_t vendor_id; 2355 uint16_t product_id; 2356 uint8_t do_unlock; 2357 2358 /* Protect scratch area */ 2359 do_unlock = usbd_enum_lock(udev); 2360 2361 temp_ptr = (char *)udev->scratch.data; 2362 temp_size = sizeof(udev->scratch.data); 2363 2364 vendor_id = UGETW(udd->idVendor); 2365 product_id = UGETW(udd->idProduct); 2366 2367 /* get serial number string */ 2368 usbd_req_get_string_any(udev, NULL, temp_ptr, temp_size, 2369 udev->ddesc.iSerialNumber); 2370 udev->serial = strdup(temp_ptr, M_USB); 2371 2372 /* get manufacturer string */ 2373 usbd_req_get_string_any(udev, NULL, temp_ptr, temp_size, 2374 udev->ddesc.iManufacturer); 2375 usb_trim_spaces(temp_ptr); 2376 if (temp_ptr[0] != '\0') 2377 udev->manufacturer = strdup(temp_ptr, M_USB); 2378 2379 /* get product string */ 2380 usbd_req_get_string_any(udev, NULL, temp_ptr, temp_size, 2381 udev->ddesc.iProduct); 2382 usb_trim_spaces(temp_ptr); 2383 if (temp_ptr[0] != '\0') 2384 udev->product = strdup(temp_ptr, M_USB); 2385 2386#ifdef USB_VERBOSE 2387 if (udev->manufacturer == NULL || udev->product == NULL) { 2388 for (kdp = usb_knowndevs; kdp->vendorname != NULL; kdp++) { 2389 if (kdp->vendor == vendor_id && 2390 (kdp->product == product_id || 2391 (kdp->flags & USB_KNOWNDEV_NOPROD) != 0)) 2392 break; 2393 } 2394 if (kdp->vendorname != NULL) { 2395 /* XXX should use pointer to knowndevs string */ 2396 if (udev->manufacturer == NULL) { 2397 udev->manufacturer = strdup(kdp->vendorname, 2398 M_USB); 2399 } 2400 if (udev->product == NULL && 2401 (kdp->flags & USB_KNOWNDEV_NOPROD) == 0) { 2402 udev->product = strdup(kdp->productname, 2403 M_USB); 2404 } 2405 } 2406 } 2407#endif 2408 /* Provide default strings if none were found */ 2409 if (udev->manufacturer == NULL) { 2410 snprintf(temp_ptr, temp_size, "vendor 0x%04x", vendor_id); 2411 udev->manufacturer = strdup(temp_ptr, M_USB); 2412 } 2413 if (udev->product == NULL) { 2414 snprintf(temp_ptr, temp_size, "product 0x%04x", product_id); 2415 udev->product = strdup(temp_ptr, M_USB); 2416 } 2417 2418 if (do_unlock) 2419 usbd_enum_unlock(udev); 2420} 2421 2422/* 2423 * Returns: 2424 * See: USB_MODE_XXX 2425 */ 2426enum usb_hc_mode 2427usbd_get_mode(struct usb_device *udev) 2428{ 2429 return (udev->flags.usb_mode); 2430} 2431 2432/* 2433 * Returns: 2434 * See: USB_SPEED_XXX 2435 */ 2436enum usb_dev_speed 2437usbd_get_speed(struct usb_device *udev) 2438{ 2439 return (udev->speed); 2440} 2441 2442uint32_t 2443usbd_get_isoc_fps(struct usb_device *udev) 2444{ 2445 ; /* indent fix */ 2446 switch (udev->speed) { 2447 case USB_SPEED_LOW: 2448 case USB_SPEED_FULL: 2449 return (1000); 2450 default: 2451 return (8000); 2452 } 2453} 2454 2455struct usb_device_descriptor * 2456usbd_get_device_descriptor(struct usb_device *udev) 2457{ 2458 if (udev == NULL) 2459 return (NULL); /* be NULL safe */ 2460 return (&udev->ddesc); 2461} 2462 2463struct usb_config_descriptor * 2464usbd_get_config_descriptor(struct usb_device *udev) 2465{ 2466 if (udev == NULL) 2467 return (NULL); /* be NULL safe */ 2468 return (udev->cdesc); 2469} 2470 2471/*------------------------------------------------------------------------* 2472 * usb_test_quirk - test a device for a given quirk 2473 * 2474 * Return values: 2475 * 0: The USB device does not have the given quirk. 2476 * Else: The USB device has the given quirk. 2477 *------------------------------------------------------------------------*/ 2478uint8_t 2479usb_test_quirk(const struct usb_attach_arg *uaa, uint16_t quirk) 2480{ 2481 uint8_t found; 2482 uint8_t x; 2483 2484 if (quirk == UQ_NONE) 2485 return (0); 2486 2487 /* search the automatic per device quirks first */ 2488 2489 for (x = 0; x != USB_MAX_AUTO_QUIRK; x++) { 2490 if (uaa->device->autoQuirk[x] == quirk) 2491 return (1); 2492 } 2493 2494 /* search global quirk table, if any */ 2495 2496 found = (usb_test_quirk_p) (&uaa->info, quirk); 2497 2498 return (found); 2499} 2500 2501struct usb_interface_descriptor * 2502usbd_get_interface_descriptor(struct usb_interface *iface) 2503{ 2504 if (iface == NULL) 2505 return (NULL); /* be NULL safe */ 2506 return (iface->idesc); 2507} 2508 2509uint8_t 2510usbd_get_interface_altindex(struct usb_interface *iface) 2511{ 2512 return (iface->alt_index); 2513} 2514 2515uint8_t 2516usbd_get_bus_index(struct usb_device *udev) 2517{ 2518 return ((uint8_t)device_get_unit(udev->bus->bdev)); 2519} 2520 2521uint8_t 2522usbd_get_device_index(struct usb_device *udev) 2523{ 2524 return (udev->device_index); 2525} 2526 2527#if USB_HAVE_DEVCTL 2528static void 2529usb_notify_addq(const char *type, struct usb_device *udev) 2530{ 2531 struct usb_interface *iface; 2532 struct sbuf *sb; 2533 int i; 2534 2535 /* announce the device */ 2536 sb = sbuf_new_auto(); 2537 sbuf_printf(sb, 2538#if USB_HAVE_UGEN 2539 "ugen=%s " 2540 "cdev=%s " 2541#endif 2542 "vendor=0x%04x " 2543 "product=0x%04x " 2544 "devclass=0x%02x " 2545 "devsubclass=0x%02x " 2546 "sernum=\"%s\" " 2547 "release=0x%04x " 2548 "mode=%s " 2549 "port=%u " 2550#if USB_HAVE_UGEN 2551 "parent=%s" 2552#endif 2553 "", 2554#if USB_HAVE_UGEN 2555 udev->ugen_name, 2556 udev->ugen_name, 2557#endif 2558 UGETW(udev->ddesc.idVendor), 2559 UGETW(udev->ddesc.idProduct), 2560 udev->ddesc.bDeviceClass, 2561 udev->ddesc.bDeviceSubClass, 2562 usb_get_serial(udev), 2563 UGETW(udev->ddesc.bcdDevice), 2564 (udev->flags.usb_mode == USB_MODE_HOST) ? "host" : "device", 2565 udev->port_no 2566#if USB_HAVE_UGEN 2567 , udev->parent_hub != NULL ? 2568 udev->parent_hub->ugen_name : 2569 device_get_nameunit(device_get_parent(udev->bus->bdev)) 2570#endif 2571 ); 2572 sbuf_finish(sb); 2573 devctl_notify("USB", "DEVICE", type, sbuf_data(sb)); 2574 sbuf_delete(sb); 2575 2576 /* announce each interface */ 2577 for (i = 0; i < USB_IFACE_MAX; i++) { 2578 iface = usbd_get_iface(udev, i); 2579 if (iface == NULL) 2580 break; /* end of interfaces */ 2581 if (iface->idesc == NULL) 2582 continue; /* no interface descriptor */ 2583 2584 sb = sbuf_new_auto(); 2585 sbuf_printf(sb, 2586#if USB_HAVE_UGEN 2587 "ugen=%s " 2588 "cdev=%s " 2589#endif 2590 "vendor=0x%04x " 2591 "product=0x%04x " 2592 "devclass=0x%02x " 2593 "devsubclass=0x%02x " 2594 "sernum=\"%s\" " 2595 "release=0x%04x " 2596 "mode=%s " 2597 "interface=%d " 2598 "endpoints=%d " 2599 "intclass=0x%02x " 2600 "intsubclass=0x%02x " 2601 "intprotocol=0x%02x", 2602#if USB_HAVE_UGEN 2603 udev->ugen_name, 2604 udev->ugen_name, 2605#endif 2606 UGETW(udev->ddesc.idVendor), 2607 UGETW(udev->ddesc.idProduct), 2608 udev->ddesc.bDeviceClass, 2609 udev->ddesc.bDeviceSubClass, 2610 usb_get_serial(udev), 2611 UGETW(udev->ddesc.bcdDevice), 2612 (udev->flags.usb_mode == USB_MODE_HOST) ? "host" : "device", 2613 iface->idesc->bInterfaceNumber, 2614 iface->idesc->bNumEndpoints, 2615 iface->idesc->bInterfaceClass, 2616 iface->idesc->bInterfaceSubClass, 2617 iface->idesc->bInterfaceProtocol); 2618 sbuf_finish(sb); 2619 devctl_notify("USB", "INTERFACE", type, sbuf_data(sb)); 2620 sbuf_delete(sb); 2621 } 2622} 2623#endif 2624 2625#if USB_HAVE_UGEN 2626/*------------------------------------------------------------------------* 2627 * usb_fifo_free_wrap 2628 * 2629 * This function will free the FIFOs. 2630 * 2631 * Description of "flag" argument: If the USB_UNCFG_FLAG_FREE_EP0 flag 2632 * is set and "iface_index" is set to "USB_IFACE_INDEX_ANY", we free 2633 * all FIFOs. If the USB_UNCFG_FLAG_FREE_EP0 flag is not set and 2634 * "iface_index" is set to "USB_IFACE_INDEX_ANY", we free all non 2635 * control endpoint FIFOs. If "iface_index" is not set to 2636 * "USB_IFACE_INDEX_ANY" the flag has no effect. 2637 *------------------------------------------------------------------------*/ 2638static void 2639usb_fifo_free_wrap(struct usb_device *udev, 2640 uint8_t iface_index, uint8_t flag) 2641{ 2642 struct usb_fifo *f; 2643 uint16_t i; 2644 2645 /* 2646 * Free any USB FIFOs on the given interface: 2647 */ 2648 for (i = 0; i != USB_FIFO_MAX; i++) { 2649 f = udev->fifo[i]; 2650 if (f == NULL) { 2651 continue; 2652 } 2653 /* Check if the interface index matches */ 2654 if (iface_index == f->iface_index) { 2655 if (f->methods != &usb_ugen_methods) { 2656 /* 2657 * Don't free any non-generic FIFOs in 2658 * this case. 2659 */ 2660 continue; 2661 } 2662 if ((f->dev_ep_index == 0) && 2663 (f->fs_xfer == NULL)) { 2664 /* no need to free this FIFO */ 2665 continue; 2666 } 2667 } else if (iface_index == USB_IFACE_INDEX_ANY) { 2668 if ((f->methods == &usb_ugen_methods) && 2669 (f->dev_ep_index == 0) && 2670 (!(flag & USB_UNCFG_FLAG_FREE_EP0)) && 2671 (f->fs_xfer == NULL)) { 2672 /* no need to free this FIFO */ 2673 continue; 2674 } 2675 } else { 2676 /* no need to free this FIFO */ 2677 continue; 2678 } 2679 /* free this FIFO */ 2680 usb_fifo_free(f); 2681 } 2682} 2683#endif 2684 2685/*------------------------------------------------------------------------* 2686 * usb_peer_can_wakeup 2687 * 2688 * Return values: 2689 * 0: Peer cannot do resume signalling. 2690 * Else: Peer can do resume signalling. 2691 *------------------------------------------------------------------------*/ 2692uint8_t 2693usb_peer_can_wakeup(struct usb_device *udev) 2694{ 2695 const struct usb_config_descriptor *cdp; 2696 2697 cdp = udev->cdesc; 2698 if ((cdp != NULL) && (udev->flags.usb_mode == USB_MODE_HOST)) { 2699 return (cdp->bmAttributes & UC_REMOTE_WAKEUP); 2700 } 2701 return (0); /* not supported */ 2702} 2703 2704void 2705usb_set_device_state(struct usb_device *udev, enum usb_dev_state state) 2706{ 2707 2708 KASSERT(state < USB_STATE_MAX, ("invalid udev state")); 2709 2710 DPRINTF("udev %p state %s -> %s\n", udev, 2711 usb_statestr(udev->state), usb_statestr(state)); 2712 2713#if USB_HAVE_UGEN 2714 mtx_lock(&usb_ref_lock); 2715#endif 2716 udev->state = state; 2717#if USB_HAVE_UGEN 2718 mtx_unlock(&usb_ref_lock); 2719#endif 2720 if (udev->bus->methods->device_state_change != NULL) 2721 (udev->bus->methods->device_state_change) (udev); 2722} 2723 2724enum usb_dev_state 2725usb_get_device_state(struct usb_device *udev) 2726{ 2727 if (udev == NULL) 2728 return (USB_STATE_DETACHED); 2729 return (udev->state); 2730} 2731 2732uint8_t 2733usbd_device_attached(struct usb_device *udev) 2734{ 2735 return (udev->state > USB_STATE_DETACHED); 2736} 2737 2738/* 2739 * The following function locks enumerating the given USB device. If 2740 * the lock is already grabbed this function returns zero. Else a 2741 * non-zero value is returned. 2742 */ 2743uint8_t 2744usbd_enum_lock(struct usb_device *udev) 2745{ 2746 if (sx_xlocked(&udev->enum_sx)) 2747 return (0); 2748 2749 sx_xlock(&udev->enum_sx); 2750 sx_xlock(&udev->sr_sx); 2751 /* 2752 * NEWBUS LOCK NOTE: We should check if any parent SX locks 2753 * are locked before locking Giant. Else the lock can be 2754 * locked multiple times. 2755 */ 2756 mtx_lock(&Giant); 2757 return (1); 2758} 2759 2760/* The following function unlocks enumerating the given USB device. */ 2761 2762void 2763usbd_enum_unlock(struct usb_device *udev) 2764{ 2765 mtx_unlock(&Giant); 2766 sx_xunlock(&udev->enum_sx); 2767 sx_xunlock(&udev->sr_sx); 2768} 2769 2770/* The following function locks suspend and resume. */ 2771 2772void 2773usbd_sr_lock(struct usb_device *udev) 2774{ 2775 sx_xlock(&udev->sr_sx); 2776 /* 2777 * NEWBUS LOCK NOTE: We should check if any parent SX locks 2778 * are locked before locking Giant. Else the lock can be 2779 * locked multiple times. 2780 */ 2781 mtx_lock(&Giant); 2782} 2783 2784/* The following function unlocks suspend and resume. */ 2785 2786void 2787usbd_sr_unlock(struct usb_device *udev) 2788{ 2789 mtx_unlock(&Giant); 2790 sx_xunlock(&udev->sr_sx); 2791} 2792 2793/* 2794 * The following function checks the enumerating lock for the given 2795 * USB device. 2796 */ 2797 2798uint8_t 2799usbd_enum_is_locked(struct usb_device *udev) 2800{ 2801 return (sx_xlocked(&udev->enum_sx)); 2802} 2803 2804/* 2805 * The following function is used to set the per-interface specific 2806 * plug and play information. The string referred to by the pnpinfo 2807 * argument can safely be freed after calling this function. The 2808 * pnpinfo of an interface will be reset at device detach or when 2809 * passing a NULL argument to this function. This function 2810 * returns zero on success, else a USB_ERR_XXX failure code. 2811 */ 2812 2813usb_error_t 2814usbd_set_pnpinfo(struct usb_device *udev, uint8_t iface_index, const char *pnpinfo) 2815{ 2816 struct usb_interface *iface; 2817 2818 iface = usbd_get_iface(udev, iface_index); 2819 if (iface == NULL) 2820 return (USB_ERR_INVAL); 2821 2822 if (iface->pnpinfo != NULL) { 2823 free(iface->pnpinfo, M_USBDEV); 2824 iface->pnpinfo = NULL; 2825 } 2826 2827 if (pnpinfo == NULL || pnpinfo[0] == 0) 2828 return (0); /* success */ 2829 2830 iface->pnpinfo = strdup(pnpinfo, M_USBDEV); 2831 if (iface->pnpinfo == NULL) 2832 return (USB_ERR_NOMEM); 2833 2834 return (0); /* success */ 2835} 2836 2837usb_error_t 2838usbd_add_dynamic_quirk(struct usb_device *udev, uint16_t quirk) 2839{ 2840 uint8_t x; 2841 2842 for (x = 0; x != USB_MAX_AUTO_QUIRK; x++) { 2843 if (udev->autoQuirk[x] == 0 || 2844 udev->autoQuirk[x] == quirk) { 2845 udev->autoQuirk[x] = quirk; 2846 return (0); /* success */ 2847 } 2848 } 2849 return (USB_ERR_NOMEM); 2850} 2851 2852/* 2853 * The following function is used to select the endpoint mode. It 2854 * should not be called outside enumeration context. 2855 */ 2856 2857usb_error_t 2858usbd_set_endpoint_mode(struct usb_device *udev, struct usb_endpoint *ep, 2859 uint8_t ep_mode) 2860{ 2861 usb_error_t error; 2862 uint8_t do_unlock; 2863 2864 /* Prevent re-enumeration */ 2865 do_unlock = usbd_enum_lock(udev); 2866 2867 if (udev->bus->methods->set_endpoint_mode != NULL) { 2868 error = (udev->bus->methods->set_endpoint_mode) ( 2869 udev, ep, ep_mode); 2870 } else if (ep_mode != USB_EP_MODE_DEFAULT) { 2871 error = USB_ERR_INVAL; 2872 } else { 2873 error = 0; 2874 } 2875 2876 /* only set new mode regardless of error */ 2877 ep->ep_mode = ep_mode; 2878 2879 if (do_unlock) 2880 usbd_enum_unlock(udev); 2881 return (error); 2882} 2883 2884uint8_t 2885usbd_get_endpoint_mode(struct usb_device *udev, struct usb_endpoint *ep) 2886{ 2887 return (ep->ep_mode); 2888} 2889