intel_display.c revision 314667
1/* 2 * Copyright �� 2006-2007 Intel Corporation 3 * 4 * Permission is hereby granted, free of charge, to any person obtaining a 5 * copy of this software and associated documentation files (the "Software"), 6 * to deal in the Software without restriction, including without limitation 7 * the rights to use, copy, modify, merge, publish, distribute, sublicense, 8 * and/or sell copies of the Software, and to permit persons to whom the 9 * Software is furnished to do so, subject to the following conditions: 10 * 11 * The above copyright notice and this permission notice (including the next 12 * paragraph) shall be included in all copies or substantial portions of the 13 * Software. 14 * 15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 20 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER 21 * DEALINGS IN THE SOFTWARE. 22 * 23 * Authors: 24 * Eric Anholt <eric@anholt.net> 25 */ 26 27#include <sys/cdefs.h> 28__FBSDID("$FreeBSD: stable/10/sys/dev/drm2/i915/intel_display.c 314667 2017-03-04 13:03:31Z avg $"); 29 30#include <dev/drm2/drmP.h> 31#include <dev/drm2/drm.h> 32#include <dev/drm2/i915/i915_drm.h> 33#include <dev/drm2/i915/i915_drv.h> 34#include <dev/drm2/i915/intel_drv.h> 35#include <dev/drm2/drm_edid.h> 36#include <dev/drm2/drm_dp_helper.h> 37#include <dev/drm2/drm_crtc_helper.h> 38#include <sys/limits.h> 39 40#define HAS_eDP (intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP)) 41 42bool intel_pipe_has_type(struct drm_crtc *crtc, int type); 43static void intel_increase_pllclock(struct drm_crtc *crtc); 44static void intel_crtc_update_cursor(struct drm_crtc *crtc, bool on); 45 46typedef struct { 47 /* given values */ 48 int n; 49 int m1, m2; 50 int p1, p2; 51 /* derived values */ 52 int dot; 53 int vco; 54 int m; 55 int p; 56} intel_clock_t; 57 58typedef struct { 59 int min, max; 60} intel_range_t; 61 62typedef struct { 63 int dot_limit; 64 int p2_slow, p2_fast; 65} intel_p2_t; 66 67#define INTEL_P2_NUM 2 68typedef struct intel_limit intel_limit_t; 69struct intel_limit { 70 intel_range_t dot, vco, n, m, m1, m2, p, p1; 71 intel_p2_t p2; 72 bool (* find_pll)(const intel_limit_t *, struct drm_crtc *, 73 int, int, intel_clock_t *, intel_clock_t *); 74}; 75 76/* FDI */ 77#define IRONLAKE_FDI_FREQ 2700000 /* in kHz for mode->clock */ 78 79static bool 80intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, 81 int target, int refclk, intel_clock_t *match_clock, 82 intel_clock_t *best_clock); 83static bool 84intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, 85 int target, int refclk, intel_clock_t *match_clock, 86 intel_clock_t *best_clock); 87 88static bool 89intel_find_pll_g4x_dp(const intel_limit_t *, struct drm_crtc *crtc, 90 int target, int refclk, intel_clock_t *match_clock, 91 intel_clock_t *best_clock); 92static bool 93intel_find_pll_ironlake_dp(const intel_limit_t *, struct drm_crtc *crtc, 94 int target, int refclk, intel_clock_t *match_clock, 95 intel_clock_t *best_clock); 96 97static inline u32 /* units of 100MHz */ 98intel_fdi_link_freq(struct drm_device *dev) 99{ 100 if (IS_GEN5(dev)) { 101 struct drm_i915_private *dev_priv = dev->dev_private; 102 return (I915_READ(FDI_PLL_BIOS_0) & FDI_PLL_FB_CLOCK_MASK) + 2; 103 } else 104 return 27; 105} 106 107static const intel_limit_t intel_limits_i8xx_dvo = { 108 .dot = { .min = 25000, .max = 350000 }, 109 .vco = { .min = 930000, .max = 1400000 }, 110 .n = { .min = 3, .max = 16 }, 111 .m = { .min = 96, .max = 140 }, 112 .m1 = { .min = 18, .max = 26 }, 113 .m2 = { .min = 6, .max = 16 }, 114 .p = { .min = 4, .max = 128 }, 115 .p1 = { .min = 2, .max = 33 }, 116 .p2 = { .dot_limit = 165000, 117 .p2_slow = 4, .p2_fast = 2 }, 118 .find_pll = intel_find_best_PLL, 119}; 120 121static const intel_limit_t intel_limits_i8xx_lvds = { 122 .dot = { .min = 25000, .max = 350000 }, 123 .vco = { .min = 930000, .max = 1400000 }, 124 .n = { .min = 3, .max = 16 }, 125 .m = { .min = 96, .max = 140 }, 126 .m1 = { .min = 18, .max = 26 }, 127 .m2 = { .min = 6, .max = 16 }, 128 .p = { .min = 4, .max = 128 }, 129 .p1 = { .min = 1, .max = 6 }, 130 .p2 = { .dot_limit = 165000, 131 .p2_slow = 14, .p2_fast = 7 }, 132 .find_pll = intel_find_best_PLL, 133}; 134 135static const intel_limit_t intel_limits_i9xx_sdvo = { 136 .dot = { .min = 20000, .max = 400000 }, 137 .vco = { .min = 1400000, .max = 2800000 }, 138 .n = { .min = 1, .max = 6 }, 139 .m = { .min = 70, .max = 120 }, 140 .m1 = { .min = 10, .max = 22 }, 141 .m2 = { .min = 5, .max = 9 }, 142 .p = { .min = 5, .max = 80 }, 143 .p1 = { .min = 1, .max = 8 }, 144 .p2 = { .dot_limit = 200000, 145 .p2_slow = 10, .p2_fast = 5 }, 146 .find_pll = intel_find_best_PLL, 147}; 148 149static const intel_limit_t intel_limits_i9xx_lvds = { 150 .dot = { .min = 20000, .max = 400000 }, 151 .vco = { .min = 1400000, .max = 2800000 }, 152 .n = { .min = 1, .max = 6 }, 153 .m = { .min = 70, .max = 120 }, 154 .m1 = { .min = 10, .max = 22 }, 155 .m2 = { .min = 5, .max = 9 }, 156 .p = { .min = 7, .max = 98 }, 157 .p1 = { .min = 1, .max = 8 }, 158 .p2 = { .dot_limit = 112000, 159 .p2_slow = 14, .p2_fast = 7 }, 160 .find_pll = intel_find_best_PLL, 161}; 162 163 164static const intel_limit_t intel_limits_g4x_sdvo = { 165 .dot = { .min = 25000, .max = 270000 }, 166 .vco = { .min = 1750000, .max = 3500000}, 167 .n = { .min = 1, .max = 4 }, 168 .m = { .min = 104, .max = 138 }, 169 .m1 = { .min = 17, .max = 23 }, 170 .m2 = { .min = 5, .max = 11 }, 171 .p = { .min = 10, .max = 30 }, 172 .p1 = { .min = 1, .max = 3}, 173 .p2 = { .dot_limit = 270000, 174 .p2_slow = 10, 175 .p2_fast = 10 176 }, 177 .find_pll = intel_g4x_find_best_PLL, 178}; 179 180static const intel_limit_t intel_limits_g4x_hdmi = { 181 .dot = { .min = 22000, .max = 400000 }, 182 .vco = { .min = 1750000, .max = 3500000}, 183 .n = { .min = 1, .max = 4 }, 184 .m = { .min = 104, .max = 138 }, 185 .m1 = { .min = 16, .max = 23 }, 186 .m2 = { .min = 5, .max = 11 }, 187 .p = { .min = 5, .max = 80 }, 188 .p1 = { .min = 1, .max = 8}, 189 .p2 = { .dot_limit = 165000, 190 .p2_slow = 10, .p2_fast = 5 }, 191 .find_pll = intel_g4x_find_best_PLL, 192}; 193 194static const intel_limit_t intel_limits_g4x_single_channel_lvds = { 195 .dot = { .min = 20000, .max = 115000 }, 196 .vco = { .min = 1750000, .max = 3500000 }, 197 .n = { .min = 1, .max = 3 }, 198 .m = { .min = 104, .max = 138 }, 199 .m1 = { .min = 17, .max = 23 }, 200 .m2 = { .min = 5, .max = 11 }, 201 .p = { .min = 28, .max = 112 }, 202 .p1 = { .min = 2, .max = 8 }, 203 .p2 = { .dot_limit = 0, 204 .p2_slow = 14, .p2_fast = 14 205 }, 206 .find_pll = intel_g4x_find_best_PLL, 207}; 208 209static const intel_limit_t intel_limits_g4x_dual_channel_lvds = { 210 .dot = { .min = 80000, .max = 224000 }, 211 .vco = { .min = 1750000, .max = 3500000 }, 212 .n = { .min = 1, .max = 3 }, 213 .m = { .min = 104, .max = 138 }, 214 .m1 = { .min = 17, .max = 23 }, 215 .m2 = { .min = 5, .max = 11 }, 216 .p = { .min = 14, .max = 42 }, 217 .p1 = { .min = 2, .max = 6 }, 218 .p2 = { .dot_limit = 0, 219 .p2_slow = 7, .p2_fast = 7 220 }, 221 .find_pll = intel_g4x_find_best_PLL, 222}; 223 224static const intel_limit_t intel_limits_g4x_display_port = { 225 .dot = { .min = 161670, .max = 227000 }, 226 .vco = { .min = 1750000, .max = 3500000}, 227 .n = { .min = 1, .max = 2 }, 228 .m = { .min = 97, .max = 108 }, 229 .m1 = { .min = 0x10, .max = 0x12 }, 230 .m2 = { .min = 0x05, .max = 0x06 }, 231 .p = { .min = 10, .max = 20 }, 232 .p1 = { .min = 1, .max = 2}, 233 .p2 = { .dot_limit = 0, 234 .p2_slow = 10, .p2_fast = 10 }, 235 .find_pll = intel_find_pll_g4x_dp, 236}; 237 238static const intel_limit_t intel_limits_pineview_sdvo = { 239 .dot = { .min = 20000, .max = 400000}, 240 .vco = { .min = 1700000, .max = 3500000 }, 241 /* Pineview's Ncounter is a ring counter */ 242 .n = { .min = 3, .max = 6 }, 243 .m = { .min = 2, .max = 256 }, 244 /* Pineview only has one combined m divider, which we treat as m2. */ 245 .m1 = { .min = 0, .max = 0 }, 246 .m2 = { .min = 0, .max = 254 }, 247 .p = { .min = 5, .max = 80 }, 248 .p1 = { .min = 1, .max = 8 }, 249 .p2 = { .dot_limit = 200000, 250 .p2_slow = 10, .p2_fast = 5 }, 251 .find_pll = intel_find_best_PLL, 252}; 253 254static const intel_limit_t intel_limits_pineview_lvds = { 255 .dot = { .min = 20000, .max = 400000 }, 256 .vco = { .min = 1700000, .max = 3500000 }, 257 .n = { .min = 3, .max = 6 }, 258 .m = { .min = 2, .max = 256 }, 259 .m1 = { .min = 0, .max = 0 }, 260 .m2 = { .min = 0, .max = 254 }, 261 .p = { .min = 7, .max = 112 }, 262 .p1 = { .min = 1, .max = 8 }, 263 .p2 = { .dot_limit = 112000, 264 .p2_slow = 14, .p2_fast = 14 }, 265 .find_pll = intel_find_best_PLL, 266}; 267 268/* Ironlake / Sandybridge 269 * 270 * We calculate clock using (register_value + 2) for N/M1/M2, so here 271 * the range value for them is (actual_value - 2). 272 */ 273static const intel_limit_t intel_limits_ironlake_dac = { 274 .dot = { .min = 25000, .max = 350000 }, 275 .vco = { .min = 1760000, .max = 3510000 }, 276 .n = { .min = 1, .max = 5 }, 277 .m = { .min = 79, .max = 127 }, 278 .m1 = { .min = 12, .max = 22 }, 279 .m2 = { .min = 5, .max = 9 }, 280 .p = { .min = 5, .max = 80 }, 281 .p1 = { .min = 1, .max = 8 }, 282 .p2 = { .dot_limit = 225000, 283 .p2_slow = 10, .p2_fast = 5 }, 284 .find_pll = intel_g4x_find_best_PLL, 285}; 286 287static const intel_limit_t intel_limits_ironlake_single_lvds = { 288 .dot = { .min = 25000, .max = 350000 }, 289 .vco = { .min = 1760000, .max = 3510000 }, 290 .n = { .min = 1, .max = 3 }, 291 .m = { .min = 79, .max = 118 }, 292 .m1 = { .min = 12, .max = 22 }, 293 .m2 = { .min = 5, .max = 9 }, 294 .p = { .min = 28, .max = 112 }, 295 .p1 = { .min = 2, .max = 8 }, 296 .p2 = { .dot_limit = 225000, 297 .p2_slow = 14, .p2_fast = 14 }, 298 .find_pll = intel_g4x_find_best_PLL, 299}; 300 301static const intel_limit_t intel_limits_ironlake_dual_lvds = { 302 .dot = { .min = 25000, .max = 350000 }, 303 .vco = { .min = 1760000, .max = 3510000 }, 304 .n = { .min = 1, .max = 3 }, 305 .m = { .min = 79, .max = 127 }, 306 .m1 = { .min = 12, .max = 22 }, 307 .m2 = { .min = 5, .max = 9 }, 308 .p = { .min = 14, .max = 56 }, 309 .p1 = { .min = 2, .max = 8 }, 310 .p2 = { .dot_limit = 225000, 311 .p2_slow = 7, .p2_fast = 7 }, 312 .find_pll = intel_g4x_find_best_PLL, 313}; 314 315/* LVDS 100mhz refclk limits. */ 316static const intel_limit_t intel_limits_ironlake_single_lvds_100m = { 317 .dot = { .min = 25000, .max = 350000 }, 318 .vco = { .min = 1760000, .max = 3510000 }, 319 .n = { .min = 1, .max = 2 }, 320 .m = { .min = 79, .max = 126 }, 321 .m1 = { .min = 12, .max = 22 }, 322 .m2 = { .min = 5, .max = 9 }, 323 .p = { .min = 28, .max = 112 }, 324 .p1 = { .min = 2, .max = 8 }, 325 .p2 = { .dot_limit = 225000, 326 .p2_slow = 14, .p2_fast = 14 }, 327 .find_pll = intel_g4x_find_best_PLL, 328}; 329 330static const intel_limit_t intel_limits_ironlake_dual_lvds_100m = { 331 .dot = { .min = 25000, .max = 350000 }, 332 .vco = { .min = 1760000, .max = 3510000 }, 333 .n = { .min = 1, .max = 3 }, 334 .m = { .min = 79, .max = 126 }, 335 .m1 = { .min = 12, .max = 22 }, 336 .m2 = { .min = 5, .max = 9 }, 337 .p = { .min = 14, .max = 42 }, 338 .p1 = { .min = 2, .max = 6 }, 339 .p2 = { .dot_limit = 225000, 340 .p2_slow = 7, .p2_fast = 7 }, 341 .find_pll = intel_g4x_find_best_PLL, 342}; 343 344static const intel_limit_t intel_limits_ironlake_display_port = { 345 .dot = { .min = 25000, .max = 350000 }, 346 .vco = { .min = 1760000, .max = 3510000}, 347 .n = { .min = 1, .max = 2 }, 348 .m = { .min = 81, .max = 90 }, 349 .m1 = { .min = 12, .max = 22 }, 350 .m2 = { .min = 5, .max = 9 }, 351 .p = { .min = 10, .max = 20 }, 352 .p1 = { .min = 1, .max = 2}, 353 .p2 = { .dot_limit = 0, 354 .p2_slow = 10, .p2_fast = 10 }, 355 .find_pll = intel_find_pll_ironlake_dp, 356}; 357 358u32 intel_dpio_read(struct drm_i915_private *dev_priv, int reg) 359{ 360 u32 val = 0; 361 362 mtx_lock(&dev_priv->dpio_lock); 363 if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) { 364 DRM_ERROR("DPIO idle wait timed out\n"); 365 goto out_unlock; 366 } 367 368 I915_WRITE(DPIO_REG, reg); 369 I915_WRITE(DPIO_PKT, DPIO_RID | DPIO_OP_READ | DPIO_PORTID | 370 DPIO_BYTE); 371 if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) { 372 DRM_ERROR("DPIO read wait timed out\n"); 373 goto out_unlock; 374 } 375 val = I915_READ(DPIO_DATA); 376 377out_unlock: 378 mtx_unlock(&dev_priv->dpio_lock); 379 return val; 380} 381 382#if 0 383static void intel_dpio_write(struct drm_i915_private *dev_priv, int reg, 384 u32 val) 385{ 386 387 mtx_lock(&dev_priv->dpio_lock); 388 if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) { 389 DRM_ERROR("DPIO idle wait timed out\n"); 390 goto out_unlock; 391 } 392 393 I915_WRITE(DPIO_DATA, val); 394 I915_WRITE(DPIO_REG, reg); 395 I915_WRITE(DPIO_PKT, DPIO_RID | DPIO_OP_WRITE | DPIO_PORTID | 396 DPIO_BYTE); 397 if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) 398 DRM_ERROR("DPIO write wait timed out\n"); 399 400out_unlock: 401 mtx_unlock(&dev_priv->dpio_lock); 402} 403#endif 404 405static void vlv_init_dpio(struct drm_device *dev) 406{ 407 struct drm_i915_private *dev_priv = dev->dev_private; 408 409 /* Reset the DPIO config */ 410 I915_WRITE(DPIO_CTL, 0); 411 POSTING_READ(DPIO_CTL); 412 I915_WRITE(DPIO_CTL, 1); 413 POSTING_READ(DPIO_CTL); 414} 415 416static int intel_dual_link_lvds_callback(const struct dmi_system_id *id) 417{ 418 DRM_INFO("Forcing lvds to dual link mode on %s\n", id->ident); 419 return 1; 420} 421 422static const struct dmi_system_id intel_dual_link_lvds[] = { 423 { 424 .callback = intel_dual_link_lvds_callback, 425 .ident = "Apple MacBook Pro (Core i5/i7 Series)", 426 .matches = { 427 DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), 428 DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro8,2"), 429 }, 430 }, 431 { } /* terminating entry */ 432}; 433 434static bool is_dual_link_lvds(struct drm_i915_private *dev_priv, 435 unsigned int reg) 436{ 437 unsigned int val; 438 439 /* use the module option value if specified */ 440 if (i915_lvds_channel_mode > 0) 441 return i915_lvds_channel_mode == 2; 442 443 if (dmi_check_system(intel_dual_link_lvds)) 444 return true; 445 446 if (dev_priv->lvds_val) 447 val = dev_priv->lvds_val; 448 else { 449 /* BIOS should set the proper LVDS register value at boot, but 450 * in reality, it doesn't set the value when the lid is closed; 451 * we need to check "the value to be set" in VBT when LVDS 452 * register is uninitialized. 453 */ 454 val = I915_READ(reg); 455 if (!(val & ~LVDS_DETECTED)) 456 val = dev_priv->bios_lvds_val; 457 dev_priv->lvds_val = val; 458 } 459 return (val & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP; 460} 461 462static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc, 463 int refclk) 464{ 465 struct drm_device *dev = crtc->dev; 466 struct drm_i915_private *dev_priv = dev->dev_private; 467 const intel_limit_t *limit; 468 469 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { 470 if (is_dual_link_lvds(dev_priv, PCH_LVDS)) { 471 /* LVDS dual channel */ 472 if (refclk == 100000) 473 limit = &intel_limits_ironlake_dual_lvds_100m; 474 else 475 limit = &intel_limits_ironlake_dual_lvds; 476 } else { 477 if (refclk == 100000) 478 limit = &intel_limits_ironlake_single_lvds_100m; 479 else 480 limit = &intel_limits_ironlake_single_lvds; 481 } 482 } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) || 483 HAS_eDP) 484 limit = &intel_limits_ironlake_display_port; 485 else 486 limit = &intel_limits_ironlake_dac; 487 488 return limit; 489} 490 491static const intel_limit_t *intel_g4x_limit(struct drm_crtc *crtc) 492{ 493 struct drm_device *dev = crtc->dev; 494 struct drm_i915_private *dev_priv = dev->dev_private; 495 const intel_limit_t *limit; 496 497 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { 498 if (is_dual_link_lvds(dev_priv, LVDS)) 499 /* LVDS with dual channel */ 500 limit = &intel_limits_g4x_dual_channel_lvds; 501 else 502 /* LVDS with dual channel */ 503 limit = &intel_limits_g4x_single_channel_lvds; 504 } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI) || 505 intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG)) { 506 limit = &intel_limits_g4x_hdmi; 507 } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO)) { 508 limit = &intel_limits_g4x_sdvo; 509 } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) { 510 limit = &intel_limits_g4x_display_port; 511 } else /* The option is for other outputs */ 512 limit = &intel_limits_i9xx_sdvo; 513 514 return limit; 515} 516 517static const intel_limit_t *intel_limit(struct drm_crtc *crtc, int refclk) 518{ 519 struct drm_device *dev = crtc->dev; 520 const intel_limit_t *limit; 521 522 if (HAS_PCH_SPLIT(dev)) 523 limit = intel_ironlake_limit(crtc, refclk); 524 else if (IS_G4X(dev)) { 525 limit = intel_g4x_limit(crtc); 526 } else if (IS_PINEVIEW(dev)) { 527 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) 528 limit = &intel_limits_pineview_lvds; 529 else 530 limit = &intel_limits_pineview_sdvo; 531 } else if (!IS_GEN2(dev)) { 532 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) 533 limit = &intel_limits_i9xx_lvds; 534 else 535 limit = &intel_limits_i9xx_sdvo; 536 } else { 537 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) 538 limit = &intel_limits_i8xx_lvds; 539 else 540 limit = &intel_limits_i8xx_dvo; 541 } 542 return limit; 543} 544 545/* m1 is reserved as 0 in Pineview, n is a ring counter */ 546static void pineview_clock(int refclk, intel_clock_t *clock) 547{ 548 clock->m = clock->m2 + 2; 549 clock->p = clock->p1 * clock->p2; 550 clock->vco = refclk * clock->m / clock->n; 551 clock->dot = clock->vco / clock->p; 552} 553 554static void intel_clock(struct drm_device *dev, int refclk, intel_clock_t *clock) 555{ 556 if (IS_PINEVIEW(dev)) { 557 pineview_clock(refclk, clock); 558 return; 559 } 560 clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2); 561 clock->p = clock->p1 * clock->p2; 562 clock->vco = refclk * clock->m / (clock->n + 2); 563 clock->dot = clock->vco / clock->p; 564} 565 566/** 567 * Returns whether any output on the specified pipe is of the specified type 568 */ 569bool intel_pipe_has_type(struct drm_crtc *crtc, int type) 570{ 571 struct drm_device *dev = crtc->dev; 572 struct drm_mode_config *mode_config = &dev->mode_config; 573 struct intel_encoder *encoder; 574 575 list_for_each_entry(encoder, &mode_config->encoder_list, base.head) 576 if (encoder->base.crtc == crtc && encoder->type == type) 577 return true; 578 579 return false; 580} 581 582#define INTELPllInvalid(s) do { /* DRM_DEBUG(s); */ return false; } while (0) 583/** 584 * Returns whether the given set of divisors are valid for a given refclk with 585 * the given connectors. 586 */ 587 588static bool intel_PLL_is_valid(struct drm_device *dev, 589 const intel_limit_t *limit, 590 const intel_clock_t *clock) 591{ 592 if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1) 593 INTELPllInvalid("p1 out of range\n"); 594 if (clock->p < limit->p.min || limit->p.max < clock->p) 595 INTELPllInvalid("p out of range\n"); 596 if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2) 597 INTELPllInvalid("m2 out of range\n"); 598 if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1) 599 INTELPllInvalid("m1 out of range\n"); 600 if (clock->m1 <= clock->m2 && !IS_PINEVIEW(dev)) 601 INTELPllInvalid("m1 <= m2\n"); 602 if (clock->m < limit->m.min || limit->m.max < clock->m) 603 INTELPllInvalid("m out of range\n"); 604 if (clock->n < limit->n.min || limit->n.max < clock->n) 605 INTELPllInvalid("n out of range\n"); 606 if (clock->vco < limit->vco.min || limit->vco.max < clock->vco) 607 INTELPllInvalid("vco out of range\n"); 608 /* XXX: We may need to be checking "Dot clock" depending on the multiplier, 609 * connector, etc., rather than just a single range. 610 */ 611 if (clock->dot < limit->dot.min || limit->dot.max < clock->dot) 612 INTELPllInvalid("dot out of range\n"); 613 614 return true; 615} 616 617static bool 618intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, 619 int target, int refclk, intel_clock_t *match_clock, 620 intel_clock_t *best_clock) 621 622{ 623 struct drm_device *dev = crtc->dev; 624 struct drm_i915_private *dev_priv = dev->dev_private; 625 intel_clock_t clock; 626 int err = target; 627 628 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) && 629 (I915_READ(LVDS)) != 0) { 630 /* 631 * For LVDS, if the panel is on, just rely on its current 632 * settings for dual-channel. We haven't figured out how to 633 * reliably set up different single/dual channel state, if we 634 * even can. 635 */ 636 if (is_dual_link_lvds(dev_priv, LVDS)) 637 clock.p2 = limit->p2.p2_fast; 638 else 639 clock.p2 = limit->p2.p2_slow; 640 } else { 641 if (target < limit->p2.dot_limit) 642 clock.p2 = limit->p2.p2_slow; 643 else 644 clock.p2 = limit->p2.p2_fast; 645 } 646 647 memset(best_clock, 0, sizeof(*best_clock)); 648 649 for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; 650 clock.m1++) { 651 for (clock.m2 = limit->m2.min; 652 clock.m2 <= limit->m2.max; clock.m2++) { 653 /* m1 is always 0 in Pineview */ 654 if (clock.m2 >= clock.m1 && !IS_PINEVIEW(dev)) 655 break; 656 for (clock.n = limit->n.min; 657 clock.n <= limit->n.max; clock.n++) { 658 for (clock.p1 = limit->p1.min; 659 clock.p1 <= limit->p1.max; clock.p1++) { 660 int this_err; 661 662 intel_clock(dev, refclk, &clock); 663 if (!intel_PLL_is_valid(dev, limit, 664 &clock)) 665 continue; 666 if (match_clock && 667 clock.p != match_clock->p) 668 continue; 669 670 this_err = abs(clock.dot - target); 671 if (this_err < err) { 672 *best_clock = clock; 673 err = this_err; 674 } 675 } 676 } 677 } 678 } 679 680 return (err != target); 681} 682 683static bool 684intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, 685 int target, int refclk, intel_clock_t *match_clock, 686 intel_clock_t *best_clock) 687{ 688 struct drm_device *dev = crtc->dev; 689 struct drm_i915_private *dev_priv = dev->dev_private; 690 intel_clock_t clock; 691 int max_n; 692 bool found; 693 /* approximately equals target * 0.00585 */ 694 int err_most = (target >> 8) + (target >> 9); 695 found = false; 696 697 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { 698 int lvds_reg; 699 700 if (HAS_PCH_SPLIT(dev)) 701 lvds_reg = PCH_LVDS; 702 else 703 lvds_reg = LVDS; 704 if ((I915_READ(lvds_reg) & LVDS_CLKB_POWER_MASK) == 705 LVDS_CLKB_POWER_UP) 706 clock.p2 = limit->p2.p2_fast; 707 else 708 clock.p2 = limit->p2.p2_slow; 709 } else { 710 if (target < limit->p2.dot_limit) 711 clock.p2 = limit->p2.p2_slow; 712 else 713 clock.p2 = limit->p2.p2_fast; 714 } 715 716 memset(best_clock, 0, sizeof(*best_clock)); 717 max_n = limit->n.max; 718 /* based on hardware requirement, prefer smaller n to precision */ 719 for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) { 720 /* based on hardware requirement, prefere larger m1,m2 */ 721 for (clock.m1 = limit->m1.max; 722 clock.m1 >= limit->m1.min; clock.m1--) { 723 for (clock.m2 = limit->m2.max; 724 clock.m2 >= limit->m2.min; clock.m2--) { 725 for (clock.p1 = limit->p1.max; 726 clock.p1 >= limit->p1.min; clock.p1--) { 727 int this_err; 728 729 intel_clock(dev, refclk, &clock); 730 if (!intel_PLL_is_valid(dev, limit, 731 &clock)) 732 continue; 733 if (match_clock && 734 clock.p != match_clock->p) 735 continue; 736 737 this_err = abs(clock.dot - target); 738 if (this_err < err_most) { 739 *best_clock = clock; 740 err_most = this_err; 741 max_n = clock.n; 742 found = true; 743 } 744 } 745 } 746 } 747 } 748 return found; 749} 750 751static bool 752intel_find_pll_ironlake_dp(const intel_limit_t *limit, struct drm_crtc *crtc, 753 int target, int refclk, intel_clock_t *match_clock, 754 intel_clock_t *best_clock) 755{ 756 struct drm_device *dev = crtc->dev; 757 intel_clock_t clock; 758 759 if (target < 200000) { 760 clock.n = 1; 761 clock.p1 = 2; 762 clock.p2 = 10; 763 clock.m1 = 12; 764 clock.m2 = 9; 765 } else { 766 clock.n = 2; 767 clock.p1 = 1; 768 clock.p2 = 10; 769 clock.m1 = 14; 770 clock.m2 = 8; 771 } 772 intel_clock(dev, refclk, &clock); 773 memcpy(best_clock, &clock, sizeof(intel_clock_t)); 774 return true; 775} 776 777/* DisplayPort has only two frequencies, 162MHz and 270MHz */ 778static bool 779intel_find_pll_g4x_dp(const intel_limit_t *limit, struct drm_crtc *crtc, 780 int target, int refclk, intel_clock_t *match_clock, 781 intel_clock_t *best_clock) 782{ 783 intel_clock_t clock; 784 if (target < 200000) { 785 clock.p1 = 2; 786 clock.p2 = 10; 787 clock.n = 2; 788 clock.m1 = 23; 789 clock.m2 = 8; 790 } else { 791 clock.p1 = 1; 792 clock.p2 = 10; 793 clock.n = 1; 794 clock.m1 = 14; 795 clock.m2 = 2; 796 } 797 clock.m = 5 * (clock.m1 + 2) + (clock.m2 + 2); 798 clock.p = (clock.p1 * clock.p2); 799 clock.dot = 96000 * clock.m / (clock.n + 2) / clock.p; 800 clock.vco = 0; 801 memcpy(best_clock, &clock, sizeof(intel_clock_t)); 802 return true; 803} 804 805static void ironlake_wait_for_vblank(struct drm_device *dev, int pipe) 806{ 807 struct drm_i915_private *dev_priv = dev->dev_private; 808 u32 frame, frame_reg = PIPEFRAME(pipe); 809 810 frame = I915_READ(frame_reg); 811 812 if (wait_for(I915_READ_NOTRACE(frame_reg) != frame, 50)) 813 DRM_DEBUG_KMS("vblank wait timed out\n"); 814} 815 816/** 817 * intel_wait_for_vblank - wait for vblank on a given pipe 818 * @dev: drm device 819 * @pipe: pipe to wait for 820 * 821 * Wait for vblank to occur on a given pipe. Needed for various bits of 822 * mode setting code. 823 */ 824void intel_wait_for_vblank(struct drm_device *dev, int pipe) 825{ 826 struct drm_i915_private *dev_priv = dev->dev_private; 827 int pipestat_reg = PIPESTAT(pipe); 828 829 if (INTEL_INFO(dev)->gen >= 5) { 830 ironlake_wait_for_vblank(dev, pipe); 831 return; 832 } 833 834 /* Clear existing vblank status. Note this will clear any other 835 * sticky status fields as well. 836 * 837 * This races with i915_driver_irq_handler() with the result 838 * that either function could miss a vblank event. Here it is not 839 * fatal, as we will either wait upon the next vblank interrupt or 840 * timeout. Generally speaking intel_wait_for_vblank() is only 841 * called during modeset at which time the GPU should be idle and 842 * should *not* be performing page flips and thus not waiting on 843 * vblanks... 844 * Currently, the result of us stealing a vblank from the irq 845 * handler is that a single frame will be skipped during swapbuffers. 846 */ 847 I915_WRITE(pipestat_reg, 848 I915_READ(pipestat_reg) | PIPE_VBLANK_INTERRUPT_STATUS); 849 850 /* Wait for vblank interrupt bit to set */ 851 if (_intel_wait_for(dev, 852 I915_READ(pipestat_reg) & PIPE_VBLANK_INTERRUPT_STATUS, 853 50, 1, "915vbl")) 854 DRM_DEBUG_KMS("vblank wait timed out\n"); 855} 856 857/* 858 * intel_wait_for_pipe_off - wait for pipe to turn off 859 * @dev: drm device 860 * @pipe: pipe to wait for 861 * 862 * After disabling a pipe, we can't wait for vblank in the usual way, 863 * spinning on the vblank interrupt status bit, since we won't actually 864 * see an interrupt when the pipe is disabled. 865 * 866 * On Gen4 and above: 867 * wait for the pipe register state bit to turn off 868 * 869 * Otherwise: 870 * wait for the display line value to settle (it usually 871 * ends up stopping at the start of the next frame). 872 * 873 */ 874void intel_wait_for_pipe_off(struct drm_device *dev, int pipe) 875{ 876 struct drm_i915_private *dev_priv = dev->dev_private; 877 878 if (INTEL_INFO(dev)->gen >= 4) { 879 int reg = PIPECONF(pipe); 880 881 /* Wait for the Pipe State to go off */ 882 if (_intel_wait_for(dev, 883 (I915_READ(reg) & I965_PIPECONF_ACTIVE) == 0, 100, 884 1, "915pip")) 885 DRM_DEBUG_KMS("pipe_off wait timed out\n"); 886 } else { 887 u32 last_line, line_mask; 888 int reg = PIPEDSL(pipe); 889 unsigned long timeout = jiffies + msecs_to_jiffies(100); 890 891 if (IS_GEN2(dev)) 892 line_mask = DSL_LINEMASK_GEN2; 893 else 894 line_mask = DSL_LINEMASK_GEN3; 895 896 /* Wait for the display line to settle */ 897 do { 898 last_line = I915_READ(reg) & line_mask; 899 DELAY(5000); 900 } while (((I915_READ(reg) & line_mask) != last_line) && 901 time_after(timeout, jiffies)); 902 if (time_after(jiffies, timeout)) 903 DRM_DEBUG_KMS("pipe_off wait timed out\n"); 904 } 905} 906 907static const char *state_string(bool enabled) 908{ 909 return enabled ? "on" : "off"; 910} 911 912/* Only for pre-ILK configs */ 913static void assert_pll(struct drm_i915_private *dev_priv, 914 enum pipe pipe, bool state) 915{ 916 int reg; 917 u32 val; 918 bool cur_state; 919 920 reg = DPLL(pipe); 921 val = I915_READ(reg); 922 cur_state = !!(val & DPLL_VCO_ENABLE); 923 if (cur_state != state) 924 printf("PLL state assertion failure (expected %s, current %s)\n", 925 state_string(state), state_string(cur_state)); 926} 927#define assert_pll_enabled(d, p) assert_pll(d, p, true) 928#define assert_pll_disabled(d, p) assert_pll(d, p, false) 929 930/* For ILK+ */ 931static void assert_pch_pll(struct drm_i915_private *dev_priv, 932 struct intel_crtc *intel_crtc, bool state) 933{ 934 int reg; 935 u32 val; 936 bool cur_state; 937 938 if (HAS_PCH_LPT(dev_priv->dev)) { 939 DRM_DEBUG_DRIVER("LPT detected: skipping PCH PLL test\n"); 940 return; 941 } 942 943 if (!intel_crtc->pch_pll) { 944 printf("asserting PCH PLL enabled with no PLL\n"); 945 return; 946 } 947 948 if (HAS_PCH_CPT(dev_priv->dev)) { 949 u32 pch_dpll; 950 951 pch_dpll = I915_READ(PCH_DPLL_SEL); 952 953 /* Make sure the selected PLL is enabled to the transcoder */ 954 KASSERT(((pch_dpll >> (4 * intel_crtc->pipe)) & 8) != 0, 955 ("transcoder %d PLL not enabled\n", intel_crtc->pipe)); 956 } 957 958 reg = intel_crtc->pch_pll->pll_reg; 959 val = I915_READ(reg); 960 cur_state = !!(val & DPLL_VCO_ENABLE); 961 if (cur_state != state) 962 printf("PCH PLL state assertion failure (expected %s, current %s)\n", 963 state_string(state), state_string(cur_state)); 964} 965#define assert_pch_pll_enabled(d, p) assert_pch_pll(d, p, true) 966#define assert_pch_pll_disabled(d, p) assert_pch_pll(d, p, false) 967 968static void assert_fdi_tx(struct drm_i915_private *dev_priv, 969 enum pipe pipe, bool state) 970{ 971 int reg; 972 u32 val; 973 bool cur_state; 974 975 if (IS_HASWELL(dev_priv->dev)) { 976 /* On Haswell, DDI is used instead of FDI_TX_CTL */ 977 reg = DDI_FUNC_CTL(pipe); 978 val = I915_READ(reg); 979 cur_state = !!(val & PIPE_DDI_FUNC_ENABLE); 980 } else { 981 reg = FDI_TX_CTL(pipe); 982 val = I915_READ(reg); 983 cur_state = !!(val & FDI_TX_ENABLE); 984 } 985 if (cur_state != state) 986 printf("FDI TX state assertion failure (expected %s, current %s)\n", 987 state_string(state), state_string(cur_state)); 988} 989#define assert_fdi_tx_enabled(d, p) assert_fdi_tx(d, p, true) 990#define assert_fdi_tx_disabled(d, p) assert_fdi_tx(d, p, false) 991 992static void assert_fdi_rx(struct drm_i915_private *dev_priv, 993 enum pipe pipe, bool state) 994{ 995 int reg; 996 u32 val; 997 bool cur_state; 998 999 if (IS_HASWELL(dev_priv->dev) && pipe > 0) { 1000 DRM_ERROR("Attempting to enable FDI_RX on Haswell pipe > 0\n"); 1001 return; 1002 } else { 1003 reg = FDI_RX_CTL(pipe); 1004 val = I915_READ(reg); 1005 cur_state = !!(val & FDI_RX_ENABLE); 1006 } 1007 if (cur_state != state) 1008 printf("FDI RX state assertion failure (expected %s, current %s)\n", 1009 state_string(state), state_string(cur_state)); 1010} 1011#define assert_fdi_rx_enabled(d, p) assert_fdi_rx(d, p, true) 1012#define assert_fdi_rx_disabled(d, p) assert_fdi_rx(d, p, false) 1013 1014static void assert_fdi_tx_pll_enabled(struct drm_i915_private *dev_priv, 1015 enum pipe pipe) 1016{ 1017 int reg; 1018 u32 val; 1019 1020 /* ILK FDI PLL is always enabled */ 1021 if (dev_priv->info->gen == 5) 1022 return; 1023 1024 /* On Haswell, DDI ports are responsible for the FDI PLL setup */ 1025 if (IS_HASWELL(dev_priv->dev)) 1026 return; 1027 1028 reg = FDI_TX_CTL(pipe); 1029 val = I915_READ(reg); 1030 if (!(val & FDI_TX_PLL_ENABLE)) 1031 printf("FDI TX PLL assertion failure, should be active but is disabled\n"); 1032} 1033 1034static void assert_fdi_rx_pll_enabled(struct drm_i915_private *dev_priv, 1035 enum pipe pipe) 1036{ 1037 int reg; 1038 u32 val; 1039 1040 if (IS_HASWELL(dev_priv->dev) && pipe > 0) { 1041 DRM_ERROR("Attempting to enable FDI on Haswell with pipe > 0\n"); 1042 return; 1043 } 1044 reg = FDI_RX_CTL(pipe); 1045 val = I915_READ(reg); 1046 if (!(val & FDI_RX_PLL_ENABLE)) 1047 printf("FDI RX PLL assertion failure, should be active but is disabled\n"); 1048} 1049 1050static void assert_panel_unlocked(struct drm_i915_private *dev_priv, 1051 enum pipe pipe) 1052{ 1053 int pp_reg, lvds_reg; 1054 u32 val; 1055 enum pipe panel_pipe = PIPE_A; 1056 bool locked = true; 1057 1058 if (HAS_PCH_SPLIT(dev_priv->dev)) { 1059 pp_reg = PCH_PP_CONTROL; 1060 lvds_reg = PCH_LVDS; 1061 } else { 1062 pp_reg = PP_CONTROL; 1063 lvds_reg = LVDS; 1064 } 1065 1066 val = I915_READ(pp_reg); 1067 if (!(val & PANEL_POWER_ON) || 1068 ((val & PANEL_UNLOCK_REGS) == PANEL_UNLOCK_REGS)) 1069 locked = false; 1070 1071 if (I915_READ(lvds_reg) & LVDS_PIPEB_SELECT) 1072 panel_pipe = PIPE_B; 1073 1074 if (panel_pipe == pipe && locked) 1075 printf("panel assertion failure, pipe %c regs locked\n", 1076 pipe_name(pipe)); 1077} 1078 1079void assert_pipe(struct drm_i915_private *dev_priv, 1080 enum pipe pipe, bool state) 1081{ 1082 int reg; 1083 u32 val; 1084 bool cur_state; 1085 1086 /* if we need the pipe A quirk it must be always on */ 1087 if (pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) 1088 state = true; 1089 1090 reg = PIPECONF(pipe); 1091 val = I915_READ(reg); 1092 cur_state = !!(val & PIPECONF_ENABLE); 1093 if (cur_state != state) 1094 printf("pipe %c assertion failure (expected %s, current %s)\n", 1095 pipe_name(pipe), state_string(state), state_string(cur_state)); 1096} 1097 1098static void assert_plane(struct drm_i915_private *dev_priv, 1099 enum plane plane, bool state) 1100{ 1101 int reg; 1102 u32 val; 1103 bool cur_state; 1104 1105 reg = DSPCNTR(plane); 1106 val = I915_READ(reg); 1107 cur_state = !!(val & DISPLAY_PLANE_ENABLE); 1108 if (cur_state != state) 1109 printf("plane %c assertion failure, (expected %s, current %s)\n", 1110 plane_name(plane), state_string(state), state_string(cur_state)); 1111} 1112 1113#define assert_plane_enabled(d, p) assert_plane(d, p, true) 1114#define assert_plane_disabled(d, p) assert_plane(d, p, false) 1115 1116static void assert_planes_disabled(struct drm_i915_private *dev_priv, 1117 enum pipe pipe) 1118{ 1119 int reg, i; 1120 u32 val; 1121 int cur_pipe; 1122 1123 /* Planes are fixed to pipes on ILK+ */ 1124 if (HAS_PCH_SPLIT(dev_priv->dev)) { 1125 reg = DSPCNTR(pipe); 1126 val = I915_READ(reg); 1127 if ((val & DISPLAY_PLANE_ENABLE) != 0) 1128 printf("plane %c assertion failure, should be disabled but not\n", 1129 plane_name(pipe)); 1130 return; 1131 } 1132 1133 /* Need to check both planes against the pipe */ 1134 for (i = 0; i < 2; i++) { 1135 reg = DSPCNTR(i); 1136 val = I915_READ(reg); 1137 cur_pipe = (val & DISPPLANE_SEL_PIPE_MASK) >> 1138 DISPPLANE_SEL_PIPE_SHIFT; 1139 if ((val & DISPLAY_PLANE_ENABLE) && pipe == cur_pipe) 1140 printf("plane %c assertion failure, should be off on pipe %c but is still active\n", 1141 plane_name(i), pipe_name(pipe)); 1142 } 1143} 1144 1145static void assert_pch_refclk_enabled(struct drm_i915_private *dev_priv) 1146{ 1147 u32 val; 1148 bool enabled; 1149 1150 if (HAS_PCH_LPT(dev_priv->dev)) { 1151 DRM_DEBUG_DRIVER("LPT does not has PCH refclk, skipping check\n"); 1152 return; 1153 } 1154 1155 val = I915_READ(PCH_DREF_CONTROL); 1156 enabled = !!(val & (DREF_SSC_SOURCE_MASK | DREF_NONSPREAD_SOURCE_MASK | 1157 DREF_SUPERSPREAD_SOURCE_MASK)); 1158 if (!enabled) 1159 printf("PCH refclk assertion failure, should be active but is disabled\n"); 1160} 1161 1162static void assert_transcoder_disabled(struct drm_i915_private *dev_priv, 1163 enum pipe pipe) 1164{ 1165 int reg; 1166 u32 val; 1167 bool enabled; 1168 1169 reg = TRANSCONF(pipe); 1170 val = I915_READ(reg); 1171 enabled = !!(val & TRANS_ENABLE); 1172 if (enabled) 1173 printf("transcoder assertion failed, should be off on pipe %c but is still active\n", 1174 pipe_name(pipe)); 1175} 1176 1177static bool hdmi_pipe_enabled(struct drm_i915_private *dev_priv, 1178 enum pipe pipe, u32 val) 1179{ 1180 if ((val & PORT_ENABLE) == 0) 1181 return false; 1182 1183 if (HAS_PCH_CPT(dev_priv->dev)) { 1184 if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe)) 1185 return false; 1186 } else { 1187 if ((val & TRANSCODER_MASK) != TRANSCODER(pipe)) 1188 return false; 1189 } 1190 return true; 1191} 1192 1193static bool lvds_pipe_enabled(struct drm_i915_private *dev_priv, 1194 enum pipe pipe, u32 val) 1195{ 1196 if ((val & LVDS_PORT_EN) == 0) 1197 return false; 1198 1199 if (HAS_PCH_CPT(dev_priv->dev)) { 1200 if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe)) 1201 return false; 1202 } else { 1203 if ((val & LVDS_PIPE_MASK) != LVDS_PIPE(pipe)) 1204 return false; 1205 } 1206 return true; 1207} 1208 1209static bool adpa_pipe_enabled(struct drm_i915_private *dev_priv, 1210 enum pipe pipe, u32 val) 1211{ 1212 if ((val & ADPA_DAC_ENABLE) == 0) 1213 return false; 1214 if (HAS_PCH_CPT(dev_priv->dev)) { 1215 if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe)) 1216 return false; 1217 } else { 1218 if ((val & ADPA_PIPE_SELECT_MASK) != ADPA_PIPE_SELECT(pipe)) 1219 return false; 1220 } 1221 return true; 1222} 1223 1224static bool dp_pipe_enabled(struct drm_i915_private *dev_priv, 1225 enum pipe pipe, u32 port_sel, u32 val) 1226{ 1227 if ((val & DP_PORT_EN) == 0) 1228 return false; 1229 1230 if (HAS_PCH_CPT(dev_priv->dev)) { 1231 u32 trans_dp_ctl_reg = TRANS_DP_CTL(pipe); 1232 u32 trans_dp_ctl = I915_READ(trans_dp_ctl_reg); 1233 if ((trans_dp_ctl & TRANS_DP_PORT_SEL_MASK) != port_sel) 1234 return false; 1235 } else { 1236 if ((val & DP_PIPE_MASK) != (pipe << 30)) 1237 return false; 1238 } 1239 return true; 1240} 1241 1242static void assert_pch_dp_disabled(struct drm_i915_private *dev_priv, 1243 enum pipe pipe, int reg, u32 port_sel) 1244{ 1245 u32 val = I915_READ(reg); 1246 if (dp_pipe_enabled(dev_priv, pipe, port_sel, val)) 1247 printf("PCH DP (0x%08x) enabled on transcoder %c, should be disabled\n", 1248 reg, pipe_name(pipe)); 1249} 1250 1251static void assert_pch_hdmi_disabled(struct drm_i915_private *dev_priv, 1252 enum pipe pipe, int reg) 1253{ 1254 u32 val = I915_READ(reg); 1255 if (hdmi_pipe_enabled(dev_priv, val, pipe)) 1256 printf("PCH HDMI (0x%08x) enabled on transcoder %c, should be disabled\n", 1257 reg, pipe_name(pipe)); 1258} 1259 1260static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv, 1261 enum pipe pipe) 1262{ 1263 int reg; 1264 u32 val; 1265 1266 assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_B, TRANS_DP_PORT_SEL_B); 1267 assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_C, TRANS_DP_PORT_SEL_C); 1268 assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_D, TRANS_DP_PORT_SEL_D); 1269 1270 reg = PCH_ADPA; 1271 val = I915_READ(reg); 1272 if (adpa_pipe_enabled(dev_priv, val, pipe)) 1273 printf("PCH VGA enabled on transcoder %c, should be disabled\n", 1274 pipe_name(pipe)); 1275 1276 reg = PCH_LVDS; 1277 val = I915_READ(reg); 1278 if (lvds_pipe_enabled(dev_priv, val, pipe)) 1279 printf("PCH LVDS enabled on transcoder %c, should be disabled\n", 1280 pipe_name(pipe)); 1281 1282 assert_pch_hdmi_disabled(dev_priv, pipe, HDMIB); 1283 assert_pch_hdmi_disabled(dev_priv, pipe, HDMIC); 1284 assert_pch_hdmi_disabled(dev_priv, pipe, HDMID); 1285} 1286 1287/** 1288 * intel_enable_pll - enable a PLL 1289 * @dev_priv: i915 private structure 1290 * @pipe: pipe PLL to enable 1291 * 1292 * Enable @pipe's PLL so we can start pumping pixels from a plane. Check to 1293 * make sure the PLL reg is writable first though, since the panel write 1294 * protect mechanism may be enabled. 1295 * 1296 * Note! This is for pre-ILK only. 1297 */ 1298static void intel_enable_pll(struct drm_i915_private *dev_priv, enum pipe pipe) 1299{ 1300 int reg; 1301 u32 val; 1302 1303 /* No really, not for ILK+ */ 1304 KASSERT(dev_priv->info->gen < 5, ("Wrong device gen")); 1305 1306 /* PLL is protected by panel, make sure we can write it */ 1307 if (IS_MOBILE(dev_priv->dev) && !IS_I830(dev_priv->dev)) 1308 assert_panel_unlocked(dev_priv, pipe); 1309 1310 reg = DPLL(pipe); 1311 val = I915_READ(reg); 1312 val |= DPLL_VCO_ENABLE; 1313 1314 /* We do this three times for luck */ 1315 I915_WRITE(reg, val); 1316 POSTING_READ(reg); 1317 DELAY(150); /* wait for warmup */ 1318 I915_WRITE(reg, val); 1319 POSTING_READ(reg); 1320 DELAY(150); /* wait for warmup */ 1321 I915_WRITE(reg, val); 1322 POSTING_READ(reg); 1323 DELAY(150); /* wait for warmup */ 1324} 1325 1326/** 1327 * intel_disable_pll - disable a PLL 1328 * @dev_priv: i915 private structure 1329 * @pipe: pipe PLL to disable 1330 * 1331 * Disable the PLL for @pipe, making sure the pipe is off first. 1332 * 1333 * Note! This is for pre-ILK only. 1334 */ 1335static void intel_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe) 1336{ 1337 int reg; 1338 u32 val; 1339 1340 /* Don't disable pipe A or pipe A PLLs if needed */ 1341 if (pipe == PIPE_A && (dev_priv->quirks & QUIRK_PIPEA_FORCE)) 1342 return; 1343 1344 /* Make sure the pipe isn't still relying on us */ 1345 assert_pipe_disabled(dev_priv, pipe); 1346 1347 reg = DPLL(pipe); 1348 val = I915_READ(reg); 1349 val &= ~DPLL_VCO_ENABLE; 1350 I915_WRITE(reg, val); 1351 POSTING_READ(reg); 1352} 1353 1354/* SBI access */ 1355static void 1356intel_sbi_write(struct drm_i915_private *dev_priv, u16 reg, u32 value) 1357{ 1358 1359 mtx_lock(&dev_priv->dpio_lock); 1360 if (wait_for((I915_READ(SBI_CTL_STAT) & SBI_READY) == 0, 1361 100)) { 1362 DRM_ERROR("timeout waiting for SBI to become ready\n"); 1363 goto out_unlock; 1364 } 1365 1366 I915_WRITE(SBI_ADDR, 1367 (reg << 16)); 1368 I915_WRITE(SBI_DATA, 1369 value); 1370 I915_WRITE(SBI_CTL_STAT, 1371 SBI_BUSY | 1372 SBI_CTL_OP_CRWR); 1373 1374 if (wait_for((I915_READ(SBI_CTL_STAT) & (SBI_READY | SBI_RESPONSE_SUCCESS)) == 0, 1375 100)) { 1376 DRM_ERROR("timeout waiting for SBI to complete write transaction\n"); 1377 goto out_unlock; 1378 } 1379 1380out_unlock: 1381 mtx_unlock(&dev_priv->dpio_lock); 1382} 1383 1384static u32 1385intel_sbi_read(struct drm_i915_private *dev_priv, u16 reg) 1386{ 1387 u32 value; 1388 1389 value = 0; 1390 mtx_lock(&dev_priv->dpio_lock); 1391 if (wait_for((I915_READ(SBI_CTL_STAT) & SBI_READY) == 0, 1392 100)) { 1393 DRM_ERROR("timeout waiting for SBI to become ready\n"); 1394 goto out_unlock; 1395 } 1396 1397 I915_WRITE(SBI_ADDR, 1398 (reg << 16)); 1399 I915_WRITE(SBI_CTL_STAT, 1400 SBI_BUSY | 1401 SBI_CTL_OP_CRRD); 1402 1403 if (wait_for((I915_READ(SBI_CTL_STAT) & (SBI_READY | SBI_RESPONSE_SUCCESS)) == 0, 1404 100)) { 1405 DRM_ERROR("timeout waiting for SBI to complete read transaction\n"); 1406 goto out_unlock; 1407 } 1408 1409 value = I915_READ(SBI_DATA); 1410 1411out_unlock: 1412 mtx_unlock(&dev_priv->dpio_lock); 1413 return value; 1414} 1415 1416/** 1417 * intel_enable_pch_pll - enable PCH PLL 1418 * @dev_priv: i915 private structure 1419 * @pipe: pipe PLL to enable 1420 * 1421 * The PCH PLL needs to be enabled before the PCH transcoder, since it 1422 * drives the transcoder clock. 1423 */ 1424static void intel_enable_pch_pll(struct intel_crtc *intel_crtc) 1425{ 1426 struct drm_i915_private *dev_priv = intel_crtc->base.dev->dev_private; 1427 struct intel_pch_pll *pll; 1428 int reg; 1429 u32 val; 1430 1431 /* PCH PLLs only available on ILK, SNB and IVB */ 1432 KASSERT(dev_priv->info->gen >= 5, ("Wrong device gen")); 1433 pll = intel_crtc->pch_pll; 1434 if (pll == NULL) 1435 return; 1436 1437 if (pll->refcount == 0) { 1438 DRM_DEBUG_KMS("pll->refcount == 0\n"); 1439 return; 1440 } 1441 1442 DRM_DEBUG_KMS("enable PCH PLL %x (active %d, on? %d)for crtc %d\n", 1443 pll->pll_reg, pll->active, pll->on, 1444 intel_crtc->base.base.id); 1445 1446 /* PCH refclock must be enabled first */ 1447 assert_pch_refclk_enabled(dev_priv); 1448 1449 if (pll->active++ && pll->on) { 1450 assert_pch_pll_enabled(dev_priv, intel_crtc); 1451 return; 1452 } 1453 1454 DRM_DEBUG_KMS("enabling PCH PLL %x\n", pll->pll_reg); 1455 1456 reg = pll->pll_reg; 1457 val = I915_READ(reg); 1458 val |= DPLL_VCO_ENABLE; 1459 I915_WRITE(reg, val); 1460 POSTING_READ(reg); 1461 DELAY(200); 1462 1463 pll->on = true; 1464} 1465 1466static void intel_disable_pch_pll(struct intel_crtc *intel_crtc) 1467{ 1468 struct drm_i915_private *dev_priv = intel_crtc->base.dev->dev_private; 1469 struct intel_pch_pll *pll = intel_crtc->pch_pll; 1470 int reg; 1471 u32 val; 1472 1473 /* PCH only available on ILK+ */ 1474 KASSERT(dev_priv->info->gen >= 5, ("Wrong device gen")); 1475 if (pll == NULL) 1476 return; 1477 1478 if (pll->refcount == 0) { 1479 DRM_DEBUG_KMS("pll->refcount == 0\n"); 1480 return; 1481 } 1482 1483 DRM_DEBUG_KMS("disable PCH PLL %x (active %d, on? %d) for crtc %d\n", 1484 pll->pll_reg, pll->active, pll->on, 1485 intel_crtc->base.base.id); 1486 1487 if (pll->active == 0) { 1488 DRM_DEBUG_KMS("pll->active == 0\n"); 1489 assert_pch_pll_disabled(dev_priv, intel_crtc); 1490 return; 1491 } 1492 1493 if (--pll->active) { 1494 assert_pch_pll_enabled(dev_priv, intel_crtc); 1495 return; 1496 } 1497 1498 DRM_DEBUG_KMS("disabling PCH PLL %x\n", pll->pll_reg); 1499 1500 /* Make sure transcoder isn't still depending on us */ 1501 assert_transcoder_disabled(dev_priv, intel_crtc->pipe); 1502 1503 reg = pll->pll_reg; 1504 val = I915_READ(reg); 1505 val &= ~DPLL_VCO_ENABLE; 1506 I915_WRITE(reg, val); 1507 POSTING_READ(reg); 1508 DELAY(200); 1509 1510 pll->on = false; 1511} 1512 1513static void intel_enable_transcoder(struct drm_i915_private *dev_priv, 1514 enum pipe pipe) 1515{ 1516 int reg; 1517 u32 val, pipeconf_val; 1518 struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe]; 1519 1520 /* PCH only available on ILK+ */ 1521 KASSERT(dev_priv->info->gen >= 5, ("Wrong device gen")); 1522 1523 /* Make sure PCH DPLL is enabled */ 1524 assert_pch_pll_enabled(dev_priv, to_intel_crtc(crtc)); 1525 1526 /* FDI must be feeding us bits for PCH ports */ 1527 assert_fdi_tx_enabled(dev_priv, pipe); 1528 assert_fdi_rx_enabled(dev_priv, pipe); 1529 1530 if (IS_HASWELL(dev_priv->dev) && pipe > 0) { 1531 DRM_ERROR("Attempting to enable transcoder on Haswell with pipe > 0\n"); 1532 return; 1533 } 1534 reg = TRANSCONF(pipe); 1535 val = I915_READ(reg); 1536 pipeconf_val = I915_READ(PIPECONF(pipe)); 1537 if (HAS_PCH_IBX(dev_priv->dev)) { 1538 /* 1539 * make the BPC in transcoder be consistent with 1540 * that in pipeconf reg. 1541 */ 1542 val &= ~PIPE_BPC_MASK; 1543 val |= pipeconf_val & PIPE_BPC_MASK; 1544 } 1545 1546 val &= ~TRANS_INTERLACE_MASK; 1547 if ((pipeconf_val & PIPECONF_INTERLACE_MASK) == PIPECONF_INTERLACED_ILK) 1548 if (HAS_PCH_IBX(dev_priv->dev) && 1549 intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO)) 1550 val |= TRANS_LEGACY_INTERLACED_ILK; 1551 else 1552 val |= TRANS_INTERLACED; 1553 else 1554 val |= TRANS_PROGRESSIVE; 1555 1556 I915_WRITE(reg, val | TRANS_ENABLE); 1557 if (_intel_wait_for(dev_priv->dev, I915_READ(reg) & TRANS_STATE_ENABLE, 1558 100, 1, "915trc")) 1559 DRM_ERROR("failed to enable transcoder %d\n", pipe); 1560} 1561 1562static void intel_disable_transcoder(struct drm_i915_private *dev_priv, 1563 enum pipe pipe) 1564{ 1565 int reg; 1566 u32 val; 1567 1568 /* FDI relies on the transcoder */ 1569 assert_fdi_tx_disabled(dev_priv, pipe); 1570 assert_fdi_rx_disabled(dev_priv, pipe); 1571 1572 /* Ports must be off as well */ 1573 assert_pch_ports_disabled(dev_priv, pipe); 1574 1575 reg = TRANSCONF(pipe); 1576 val = I915_READ(reg); 1577 val &= ~TRANS_ENABLE; 1578 I915_WRITE(reg, val); 1579 /* wait for PCH transcoder off, transcoder state */ 1580 if (_intel_wait_for(dev_priv->dev, 1581 (I915_READ(reg) & TRANS_STATE_ENABLE) == 0, 50, 1582 1, "915trd")) 1583 DRM_ERROR("failed to disable transcoder %d\n", pipe); 1584} 1585 1586/** 1587 * intel_enable_pipe - enable a pipe, asserting requirements 1588 * @dev_priv: i915 private structure 1589 * @pipe: pipe to enable 1590 * @pch_port: on ILK+, is this pipe driving a PCH port or not 1591 * 1592 * Enable @pipe, making sure that various hardware specific requirements 1593 * are met, if applicable, e.g. PLL enabled, LVDS pairs enabled, etc. 1594 * 1595 * @pipe should be %PIPE_A or %PIPE_B. 1596 * 1597 * Will wait until the pipe is actually running (i.e. first vblank) before 1598 * returning. 1599 */ 1600static void intel_enable_pipe(struct drm_i915_private *dev_priv, enum pipe pipe, 1601 bool pch_port) 1602{ 1603 int reg; 1604 u32 val; 1605 1606 /* 1607 * A pipe without a PLL won't actually be able to drive bits from 1608 * a plane. On ILK+ the pipe PLLs are integrated, so we don't 1609 * need the check. 1610 */ 1611 if (!HAS_PCH_SPLIT(dev_priv->dev)) 1612 assert_pll_enabled(dev_priv, pipe); 1613 else { 1614 if (pch_port) { 1615 /* if driving the PCH, we need FDI enabled */ 1616 assert_fdi_rx_pll_enabled(dev_priv, pipe); 1617 assert_fdi_tx_pll_enabled(dev_priv, pipe); 1618 } 1619 /* FIXME: assert CPU port conditions for SNB+ */ 1620 } 1621 1622 reg = PIPECONF(pipe); 1623 val = I915_READ(reg); 1624 if (val & PIPECONF_ENABLE) 1625 return; 1626 1627 I915_WRITE(reg, val | PIPECONF_ENABLE); 1628 intel_wait_for_vblank(dev_priv->dev, pipe); 1629} 1630 1631/** 1632 * intel_disable_pipe - disable a pipe, asserting requirements 1633 * @dev_priv: i915 private structure 1634 * @pipe: pipe to disable 1635 * 1636 * Disable @pipe, making sure that various hardware specific requirements 1637 * are met, if applicable, e.g. plane disabled, panel fitter off, etc. 1638 * 1639 * @pipe should be %PIPE_A or %PIPE_B. 1640 * 1641 * Will wait until the pipe has shut down before returning. 1642 */ 1643static void intel_disable_pipe(struct drm_i915_private *dev_priv, 1644 enum pipe pipe) 1645{ 1646 int reg; 1647 u32 val; 1648 1649 /* 1650 * Make sure planes won't keep trying to pump pixels to us, 1651 * or we might hang the display. 1652 */ 1653 assert_planes_disabled(dev_priv, pipe); 1654 1655 /* Don't disable pipe A or pipe A PLLs if needed */ 1656 if (pipe == PIPE_A && (dev_priv->quirks & QUIRK_PIPEA_FORCE)) 1657 return; 1658 1659 reg = PIPECONF(pipe); 1660 val = I915_READ(reg); 1661 if ((val & PIPECONF_ENABLE) == 0) 1662 return; 1663 1664 I915_WRITE(reg, val & ~PIPECONF_ENABLE); 1665 intel_wait_for_pipe_off(dev_priv->dev, pipe); 1666} 1667 1668/* 1669 * Plane regs are double buffered, going from enabled->disabled needs a 1670 * trigger in order to latch. The display address reg provides this. 1671 */ 1672void intel_flush_display_plane(struct drm_i915_private *dev_priv, 1673 enum plane plane) 1674{ 1675 I915_WRITE(DSPADDR(plane), I915_READ(DSPADDR(plane))); 1676 I915_WRITE(DSPSURF(plane), I915_READ(DSPSURF(plane))); 1677} 1678 1679/** 1680 * intel_enable_plane - enable a display plane on a given pipe 1681 * @dev_priv: i915 private structure 1682 * @plane: plane to enable 1683 * @pipe: pipe being fed 1684 * 1685 * Enable @plane on @pipe, making sure that @pipe is running first. 1686 */ 1687static void intel_enable_plane(struct drm_i915_private *dev_priv, 1688 enum plane plane, enum pipe pipe) 1689{ 1690 int reg; 1691 u32 val; 1692 1693 /* If the pipe isn't enabled, we can't pump pixels and may hang */ 1694 assert_pipe_enabled(dev_priv, pipe); 1695 1696 reg = DSPCNTR(plane); 1697 val = I915_READ(reg); 1698 if (val & DISPLAY_PLANE_ENABLE) 1699 return; 1700 1701 I915_WRITE(reg, val | DISPLAY_PLANE_ENABLE); 1702 intel_flush_display_plane(dev_priv, plane); 1703 intel_wait_for_vblank(dev_priv->dev, pipe); 1704} 1705 1706/** 1707 * intel_disable_plane - disable a display plane 1708 * @dev_priv: i915 private structure 1709 * @plane: plane to disable 1710 * @pipe: pipe consuming the data 1711 * 1712 * Disable @plane; should be an independent operation. 1713 */ 1714static void intel_disable_plane(struct drm_i915_private *dev_priv, 1715 enum plane plane, enum pipe pipe) 1716{ 1717 int reg; 1718 u32 val; 1719 1720 reg = DSPCNTR(plane); 1721 val = I915_READ(reg); 1722 if ((val & DISPLAY_PLANE_ENABLE) == 0) 1723 return; 1724 1725 I915_WRITE(reg, val & ~DISPLAY_PLANE_ENABLE); 1726 intel_flush_display_plane(dev_priv, plane); 1727 intel_wait_for_vblank(dev_priv->dev, pipe); 1728} 1729 1730static void disable_pch_dp(struct drm_i915_private *dev_priv, 1731 enum pipe pipe, int reg, u32 port_sel) 1732{ 1733 u32 val = I915_READ(reg); 1734 if (dp_pipe_enabled(dev_priv, pipe, port_sel, val)) { 1735 DRM_DEBUG_KMS("Disabling pch dp %x on pipe %d\n", reg, pipe); 1736 I915_WRITE(reg, val & ~DP_PORT_EN); 1737 } 1738} 1739 1740static void disable_pch_hdmi(struct drm_i915_private *dev_priv, 1741 enum pipe pipe, int reg) 1742{ 1743 u32 val = I915_READ(reg); 1744 if (hdmi_pipe_enabled(dev_priv, val, pipe)) { 1745 DRM_DEBUG_KMS("Disabling pch HDMI %x on pipe %d\n", 1746 reg, pipe); 1747 I915_WRITE(reg, val & ~PORT_ENABLE); 1748 } 1749} 1750 1751/* Disable any ports connected to this transcoder */ 1752static void intel_disable_pch_ports(struct drm_i915_private *dev_priv, 1753 enum pipe pipe) 1754{ 1755 u32 reg, val; 1756 1757 val = I915_READ(PCH_PP_CONTROL); 1758 I915_WRITE(PCH_PP_CONTROL, val | PANEL_UNLOCK_REGS); 1759 1760 disable_pch_dp(dev_priv, pipe, PCH_DP_B, TRANS_DP_PORT_SEL_B); 1761 disable_pch_dp(dev_priv, pipe, PCH_DP_C, TRANS_DP_PORT_SEL_C); 1762 disable_pch_dp(dev_priv, pipe, PCH_DP_D, TRANS_DP_PORT_SEL_D); 1763 1764 reg = PCH_ADPA; 1765 val = I915_READ(reg); 1766 if (adpa_pipe_enabled(dev_priv, val, pipe)) 1767 I915_WRITE(reg, val & ~ADPA_DAC_ENABLE); 1768 1769 reg = PCH_LVDS; 1770 val = I915_READ(reg); 1771 if (lvds_pipe_enabled(dev_priv, val, pipe)) { 1772 DRM_DEBUG_KMS("disable lvds on pipe %d val 0x%08x\n", pipe, val); 1773 I915_WRITE(reg, val & ~LVDS_PORT_EN); 1774 POSTING_READ(reg); 1775 DELAY(100); 1776 } 1777 1778 disable_pch_hdmi(dev_priv, pipe, HDMIB); 1779 disable_pch_hdmi(dev_priv, pipe, HDMIC); 1780 disable_pch_hdmi(dev_priv, pipe, HDMID); 1781} 1782 1783int 1784intel_pin_and_fence_fb_obj(struct drm_device *dev, 1785 struct drm_i915_gem_object *obj, 1786 struct intel_ring_buffer *pipelined) 1787{ 1788 struct drm_i915_private *dev_priv = dev->dev_private; 1789 u32 alignment; 1790 int ret; 1791 1792 alignment = 0; /* shut gcc */ 1793 switch (obj->tiling_mode) { 1794 case I915_TILING_NONE: 1795 if (IS_BROADWATER(dev) || IS_CRESTLINE(dev)) 1796 alignment = 128 * 1024; 1797 else if (INTEL_INFO(dev)->gen >= 4) 1798 alignment = 4 * 1024; 1799 else 1800 alignment = 64 * 1024; 1801 break; 1802 case I915_TILING_X: 1803 /* pin() will align the object as required by fence */ 1804 alignment = 0; 1805 break; 1806 case I915_TILING_Y: 1807 /* FIXME: Is this true? */ 1808 DRM_ERROR("Y tiled not allowed for scan out buffers\n"); 1809 return -EINVAL; 1810 default: 1811 KASSERT(0, ("Wrong tiling for fb obj")); 1812 } 1813 1814 dev_priv->mm.interruptible = false; 1815 ret = i915_gem_object_pin_to_display_plane(obj, alignment, pipelined); 1816 if (ret) 1817 goto err_interruptible; 1818 1819 /* Install a fence for tiled scan-out. Pre-i965 always needs a 1820 * fence, whereas 965+ only requires a fence if using 1821 * framebuffer compression. For simplicity, we always install 1822 * a fence as the cost is not that onerous. 1823 */ 1824 ret = i915_gem_object_get_fence(obj); 1825 if (ret) 1826 goto err_unpin; 1827 1828 i915_gem_object_pin_fence(obj); 1829 1830 dev_priv->mm.interruptible = true; 1831 return 0; 1832 1833err_unpin: 1834 i915_gem_object_unpin_from_display_plane(obj); 1835err_interruptible: 1836 dev_priv->mm.interruptible = true; 1837 return ret; 1838} 1839 1840void intel_unpin_fb_obj(struct drm_i915_gem_object *obj) 1841{ 1842 i915_gem_object_unpin_fence(obj); 1843 i915_gem_object_unpin_from_display_plane(obj); 1844} 1845 1846static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb, 1847 int x, int y) 1848{ 1849 struct drm_device *dev = crtc->dev; 1850 struct drm_i915_private *dev_priv = dev->dev_private; 1851 struct intel_crtc *intel_crtc = to_intel_crtc(crtc); 1852 struct intel_framebuffer *intel_fb; 1853 struct drm_i915_gem_object *obj; 1854 int plane = intel_crtc->plane; 1855 unsigned long Start, Offset; 1856 u32 dspcntr; 1857 u32 reg; 1858 1859 switch (plane) { 1860 case 0: 1861 case 1: 1862 break; 1863 default: 1864 DRM_ERROR("Can't update plane %d in SAREA\n", plane); 1865 return -EINVAL; 1866 } 1867 1868 intel_fb = to_intel_framebuffer(fb); 1869 obj = intel_fb->obj; 1870 1871 reg = DSPCNTR(plane); 1872 dspcntr = I915_READ(reg); 1873 /* Mask out pixel format bits in case we change it */ 1874 dspcntr &= ~DISPPLANE_PIXFORMAT_MASK; 1875 switch (fb->bits_per_pixel) { 1876 case 8: 1877 dspcntr |= DISPPLANE_8BPP; 1878 break; 1879 case 16: 1880 if (fb->depth == 15) 1881 dspcntr |= DISPPLANE_15_16BPP; 1882 else 1883 dspcntr |= DISPPLANE_16BPP; 1884 break; 1885 case 24: 1886 case 32: 1887 dspcntr |= DISPPLANE_32BPP_NO_ALPHA; 1888 break; 1889 default: 1890 DRM_ERROR("Unknown color depth %d\n", fb->bits_per_pixel); 1891 return -EINVAL; 1892 } 1893 if (INTEL_INFO(dev)->gen >= 4) { 1894 if (obj->tiling_mode != I915_TILING_NONE) 1895 dspcntr |= DISPPLANE_TILED; 1896 else 1897 dspcntr &= ~DISPPLANE_TILED; 1898 } 1899 1900 I915_WRITE(reg, dspcntr); 1901 1902 Start = obj->gtt_offset; 1903 Offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8); 1904 1905 DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n", 1906 Start, Offset, x, y, fb->pitches[0]); 1907 I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]); 1908 if (INTEL_INFO(dev)->gen >= 4) { 1909 I915_MODIFY_DISPBASE(DSPSURF(plane), Start); 1910 I915_WRITE(DSPTILEOFF(plane), (y << 16) | x); 1911 I915_WRITE(DSPADDR(plane), Offset); 1912 } else 1913 I915_WRITE(DSPADDR(plane), Start + Offset); 1914 POSTING_READ(reg); 1915 1916 return (0); 1917} 1918 1919static int ironlake_update_plane(struct drm_crtc *crtc, 1920 struct drm_framebuffer *fb, int x, int y) 1921{ 1922 struct drm_device *dev = crtc->dev; 1923 struct drm_i915_private *dev_priv = dev->dev_private; 1924 struct intel_crtc *intel_crtc = to_intel_crtc(crtc); 1925 struct intel_framebuffer *intel_fb; 1926 struct drm_i915_gem_object *obj; 1927 int plane = intel_crtc->plane; 1928 unsigned long Start, Offset; 1929 u32 dspcntr; 1930 u32 reg; 1931 1932 switch (plane) { 1933 case 0: 1934 case 1: 1935 case 2: 1936 break; 1937 default: 1938 DRM_ERROR("Can't update plane %d in SAREA\n", plane); 1939 return -EINVAL; 1940 } 1941 1942 intel_fb = to_intel_framebuffer(fb); 1943 obj = intel_fb->obj; 1944 1945 reg = DSPCNTR(plane); 1946 dspcntr = I915_READ(reg); 1947 /* Mask out pixel format bits in case we change it */ 1948 dspcntr &= ~DISPPLANE_PIXFORMAT_MASK; 1949 switch (fb->bits_per_pixel) { 1950 case 8: 1951 dspcntr |= DISPPLANE_8BPP; 1952 break; 1953 case 16: 1954 if (fb->depth != 16) { 1955 DRM_ERROR("bpp 16, depth %d\n", fb->depth); 1956 return -EINVAL; 1957 } 1958 1959 dspcntr |= DISPPLANE_16BPP; 1960 break; 1961 case 24: 1962 case 32: 1963 if (fb->depth == 24) 1964 dspcntr |= DISPPLANE_32BPP_NO_ALPHA; 1965 else if (fb->depth == 30) 1966 dspcntr |= DISPPLANE_32BPP_30BIT_NO_ALPHA; 1967 else { 1968 DRM_ERROR("bpp %d depth %d\n", fb->bits_per_pixel, 1969 fb->depth); 1970 return -EINVAL; 1971 } 1972 break; 1973 default: 1974 DRM_ERROR("Unknown color depth %d\n", fb->bits_per_pixel); 1975 return -EINVAL; 1976 } 1977 1978 if (obj->tiling_mode != I915_TILING_NONE) 1979 dspcntr |= DISPPLANE_TILED; 1980 else 1981 dspcntr &= ~DISPPLANE_TILED; 1982 1983 /* must disable */ 1984 dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE; 1985 1986 I915_WRITE(reg, dspcntr); 1987 1988 Start = obj->gtt_offset; 1989 Offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8); 1990 1991 DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n", 1992 Start, Offset, x, y, fb->pitches[0]); 1993 I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]); 1994 I915_MODIFY_DISPBASE(DSPSURF(plane), Start); 1995 I915_WRITE(DSPTILEOFF(plane), (y << 16) | x); 1996 I915_WRITE(DSPADDR(plane), Offset); 1997 POSTING_READ(reg); 1998 1999 return 0; 2000} 2001 2002/* Assume fb object is pinned & idle & fenced and just update base pointers */ 2003static int 2004intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb, 2005 int x, int y, enum mode_set_atomic state) 2006{ 2007 struct drm_device *dev = crtc->dev; 2008 struct drm_i915_private *dev_priv = dev->dev_private; 2009 2010 if (dev_priv->display.disable_fbc) 2011 dev_priv->display.disable_fbc(dev); 2012 intel_increase_pllclock(crtc); 2013 2014 return dev_priv->display.update_plane(crtc, fb, x, y); 2015} 2016 2017static int 2018intel_finish_fb(struct drm_framebuffer *old_fb) 2019{ 2020 struct drm_i915_gem_object *obj = to_intel_framebuffer(old_fb)->obj; 2021 struct drm_device *dev = obj->base.dev; 2022 struct drm_i915_private *dev_priv = dev->dev_private; 2023 bool was_interruptible = dev_priv->mm.interruptible; 2024 int ret; 2025 2026 mtx_lock(&dev->event_lock); 2027 while (!atomic_load_acq_int(&dev_priv->mm.wedged) && 2028 atomic_load_acq_int(&obj->pending_flip) != 0) { 2029 msleep(&obj->pending_flip, &dev->event_lock, 2030 0, "915flp", 0); 2031 } 2032 mtx_unlock(&dev->event_lock); 2033 2034 /* Big Hammer, we also need to ensure that any pending 2035 * MI_WAIT_FOR_EVENT inside a user batch buffer on the 2036 * current scanout is retired before unpinning the old 2037 * framebuffer. 2038 * 2039 * This should only fail upon a hung GPU, in which case we 2040 * can safely continue. 2041 */ 2042 dev_priv->mm.interruptible = false; 2043 ret = i915_gem_object_finish_gpu(obj); 2044 dev_priv->mm.interruptible = was_interruptible; 2045 return ret; 2046} 2047 2048static int 2049intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, 2050 struct drm_framebuffer *old_fb) 2051{ 2052 struct drm_device *dev = crtc->dev; 2053 struct drm_i915_private *dev_priv = dev->dev_private; 2054 struct drm_i915_master_private *master_priv; 2055 struct intel_crtc *intel_crtc = to_intel_crtc(crtc); 2056 int ret; 2057 2058 /* no fb bound */ 2059 if (!crtc->fb) { 2060 DRM_ERROR("No FB bound\n"); 2061 return 0; 2062 } 2063 2064 if(intel_crtc->plane > dev_priv->num_pipe) { 2065 DRM_ERROR("no plane for crtc: plane %d, num_pipes %d\n", 2066 intel_crtc->plane, 2067 dev_priv->num_pipe); 2068 return -EINVAL; 2069 } 2070 2071 DRM_LOCK(dev); 2072 ret = intel_pin_and_fence_fb_obj(dev, 2073 to_intel_framebuffer(crtc->fb)->obj, 2074 NULL); 2075 if (ret != 0) { 2076 DRM_UNLOCK(dev); 2077 DRM_ERROR("pin & fence failed\n"); 2078 return ret; 2079 } 2080 2081 if (old_fb) 2082 intel_finish_fb(old_fb); 2083 2084 ret = dev_priv->display.update_plane(crtc, crtc->fb, x, y); 2085 if (ret) { 2086 intel_unpin_fb_obj(to_intel_framebuffer(crtc->fb)->obj); 2087 DRM_UNLOCK(dev); 2088 DRM_ERROR("failed to update base address\n"); 2089 return ret; 2090 } 2091 2092 if (old_fb) { 2093 intel_wait_for_vblank(dev, intel_crtc->pipe); 2094 intel_unpin_fb_obj(to_intel_framebuffer(old_fb)->obj); 2095 } 2096 2097 intel_update_fbc(dev); 2098 DRM_UNLOCK(dev); 2099 2100 if (!dev->primary->master) 2101 return 0; 2102 2103 master_priv = dev->primary->master->driver_priv; 2104 if (!master_priv->sarea_priv) 2105 return 0; 2106 2107 if (intel_crtc->pipe) { 2108 master_priv->sarea_priv->pipeB_x = x; 2109 master_priv->sarea_priv->pipeB_y = y; 2110 } else { 2111 master_priv->sarea_priv->pipeA_x = x; 2112 master_priv->sarea_priv->pipeA_y = y; 2113 } 2114 2115 return 0; 2116} 2117 2118static void ironlake_set_pll_edp(struct drm_crtc *crtc, int clock) 2119{ 2120 struct drm_device *dev = crtc->dev; 2121 struct drm_i915_private *dev_priv = dev->dev_private; 2122 u32 dpa_ctl; 2123 2124 DRM_DEBUG_KMS("eDP PLL enable for clock %d\n", clock); 2125 dpa_ctl = I915_READ(DP_A); 2126 dpa_ctl &= ~DP_PLL_FREQ_MASK; 2127 2128 if (clock < 200000) { 2129 u32 temp; 2130 dpa_ctl |= DP_PLL_FREQ_160MHZ; 2131 /* workaround for 160Mhz: 2132 1) program 0x4600c bits 15:0 = 0x8124 2133 2) program 0x46010 bit 0 = 1 2134 3) program 0x46034 bit 24 = 1 2135 4) program 0x64000 bit 14 = 1 2136 */ 2137 temp = I915_READ(0x4600c); 2138 temp &= 0xffff0000; 2139 I915_WRITE(0x4600c, temp | 0x8124); 2140 2141 temp = I915_READ(0x46010); 2142 I915_WRITE(0x46010, temp | 1); 2143 2144 temp = I915_READ(0x46034); 2145 I915_WRITE(0x46034, temp | (1 << 24)); 2146 } else { 2147 dpa_ctl |= DP_PLL_FREQ_270MHZ; 2148 } 2149 I915_WRITE(DP_A, dpa_ctl); 2150 2151 POSTING_READ(DP_A); 2152 DELAY(500); 2153} 2154 2155static void intel_fdi_normal_train(struct drm_crtc *crtc) 2156{ 2157 struct drm_device *dev = crtc->dev; 2158 struct drm_i915_private *dev_priv = dev->dev_private; 2159 struct intel_crtc *intel_crtc = to_intel_crtc(crtc); 2160 int pipe = intel_crtc->pipe; 2161 u32 reg, temp; 2162 2163 /* enable normal train */ 2164 reg = FDI_TX_CTL(pipe); 2165 temp = I915_READ(reg); 2166 if (IS_IVYBRIDGE(dev)) { 2167 temp &= ~FDI_LINK_TRAIN_NONE_IVB; 2168 temp |= FDI_LINK_TRAIN_NONE_IVB | FDI_TX_ENHANCE_FRAME_ENABLE; 2169 } else { 2170 temp &= ~FDI_LINK_TRAIN_NONE; 2171 temp |= FDI_LINK_TRAIN_NONE | FDI_TX_ENHANCE_FRAME_ENABLE; 2172 } 2173 I915_WRITE(reg, temp); 2174 2175 reg = FDI_RX_CTL(pipe); 2176 temp = I915_READ(reg); 2177 if (HAS_PCH_CPT(dev)) { 2178 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT; 2179 temp |= FDI_LINK_TRAIN_NORMAL_CPT; 2180 } else { 2181 temp &= ~FDI_LINK_TRAIN_NONE; 2182 temp |= FDI_LINK_TRAIN_NONE; 2183 } 2184 I915_WRITE(reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE); 2185 2186 /* wait one idle pattern time */ 2187 POSTING_READ(reg); 2188 DELAY(1000); 2189 2190 /* IVB wants error correction enabled */ 2191 if (IS_IVYBRIDGE(dev)) 2192 I915_WRITE(reg, I915_READ(reg) | FDI_FS_ERRC_ENABLE | 2193 FDI_FE_ERRC_ENABLE); 2194} 2195 2196static void cpt_phase_pointer_enable(struct drm_device *dev, int pipe) 2197{ 2198 struct drm_i915_private *dev_priv = dev->dev_private; 2199 u32 flags = I915_READ(SOUTH_CHICKEN1); 2200 2201 flags |= FDI_PHASE_SYNC_OVR(pipe); 2202 I915_WRITE(SOUTH_CHICKEN1, flags); /* once to unlock... */ 2203 flags |= FDI_PHASE_SYNC_EN(pipe); 2204 I915_WRITE(SOUTH_CHICKEN1, flags); /* then again to enable */ 2205 POSTING_READ(SOUTH_CHICKEN1); 2206} 2207 2208/* The FDI link training functions for ILK/Ibexpeak. */ 2209static void ironlake_fdi_link_train(struct drm_crtc *crtc) 2210{ 2211 struct drm_device *dev = crtc->dev; 2212 struct drm_i915_private *dev_priv = dev->dev_private; 2213 struct intel_crtc *intel_crtc = to_intel_crtc(crtc); 2214 int pipe = intel_crtc->pipe; 2215 int plane = intel_crtc->plane; 2216 u32 reg, temp, tries; 2217 2218 /* FDI needs bits from pipe & plane first */ 2219 assert_pipe_enabled(dev_priv, pipe); 2220 assert_plane_enabled(dev_priv, plane); 2221 2222 /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit 2223 for train result */ 2224 reg = FDI_RX_IMR(pipe); 2225 temp = I915_READ(reg); 2226 temp &= ~FDI_RX_SYMBOL_LOCK; 2227 temp &= ~FDI_RX_BIT_LOCK; 2228 I915_WRITE(reg, temp); 2229 I915_READ(reg); 2230 DELAY(150); 2231 2232 /* enable CPU FDI TX and PCH FDI RX */ 2233 reg = FDI_TX_CTL(pipe); 2234 temp = I915_READ(reg); 2235 temp &= ~(7 << 19); 2236 temp |= (intel_crtc->fdi_lanes - 1) << 19; 2237 temp &= ~FDI_LINK_TRAIN_NONE; 2238 temp |= FDI_LINK_TRAIN_PATTERN_1; 2239 I915_WRITE(reg, temp | FDI_TX_ENABLE); 2240 2241 reg = FDI_RX_CTL(pipe); 2242 temp = I915_READ(reg); 2243 temp &= ~FDI_LINK_TRAIN_NONE; 2244 temp |= FDI_LINK_TRAIN_PATTERN_1; 2245 I915_WRITE(reg, temp | FDI_RX_ENABLE); 2246 2247 POSTING_READ(reg); 2248 DELAY(150); 2249 2250 /* Ironlake workaround, enable clock pointer after FDI enable*/ 2251 if (HAS_PCH_IBX(dev)) { 2252 I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR); 2253 I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR | 2254 FDI_RX_PHASE_SYNC_POINTER_EN); 2255 } 2256 2257 reg = FDI_RX_IIR(pipe); 2258 for (tries = 0; tries < 5; tries++) { 2259 temp = I915_READ(reg); 2260 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp); 2261 2262 if ((temp & FDI_RX_BIT_LOCK)) { 2263 DRM_DEBUG_KMS("FDI train 1 done.\n"); 2264 I915_WRITE(reg, temp | FDI_RX_BIT_LOCK); 2265 break; 2266 } 2267 } 2268 if (tries == 5) 2269 DRM_ERROR("FDI train 1 fail!\n"); 2270 2271 /* Train 2 */ 2272 reg = FDI_TX_CTL(pipe); 2273 temp = I915_READ(reg); 2274 temp &= ~FDI_LINK_TRAIN_NONE; 2275 temp |= FDI_LINK_TRAIN_PATTERN_2; 2276 I915_WRITE(reg, temp); 2277 2278 reg = FDI_RX_CTL(pipe); 2279 temp = I915_READ(reg); 2280 temp &= ~FDI_LINK_TRAIN_NONE; 2281 temp |= FDI_LINK_TRAIN_PATTERN_2; 2282 I915_WRITE(reg, temp); 2283 2284 POSTING_READ(reg); 2285 DELAY(150); 2286 2287 reg = FDI_RX_IIR(pipe); 2288 for (tries = 0; tries < 5; tries++) { 2289 temp = I915_READ(reg); 2290 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp); 2291 2292 if (temp & FDI_RX_SYMBOL_LOCK) { 2293 I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK); 2294 DRM_DEBUG_KMS("FDI train 2 done.\n"); 2295 break; 2296 } 2297 } 2298 if (tries == 5) 2299 DRM_ERROR("FDI train 2 fail!\n"); 2300 2301 DRM_DEBUG_KMS("FDI train done\n"); 2302 2303} 2304 2305static const int snb_b_fdi_train_param[] = { 2306 FDI_LINK_TRAIN_400MV_0DB_SNB_B, 2307 FDI_LINK_TRAIN_400MV_6DB_SNB_B, 2308 FDI_LINK_TRAIN_600MV_3_5DB_SNB_B, 2309 FDI_LINK_TRAIN_800MV_0DB_SNB_B, 2310}; 2311 2312/* The FDI link training functions for SNB/Cougarpoint. */ 2313static void gen6_fdi_link_train(struct drm_crtc *crtc) 2314{ 2315 struct drm_device *dev = crtc->dev; 2316 struct drm_i915_private *dev_priv = dev->dev_private; 2317 struct intel_crtc *intel_crtc = to_intel_crtc(crtc); 2318 int pipe = intel_crtc->pipe; 2319 u32 reg, temp, i, retry; 2320 2321 /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit 2322 for train result */ 2323 reg = FDI_RX_IMR(pipe); 2324 temp = I915_READ(reg); 2325 temp &= ~FDI_RX_SYMBOL_LOCK; 2326 temp &= ~FDI_RX_BIT_LOCK; 2327 I915_WRITE(reg, temp); 2328 2329 POSTING_READ(reg); 2330 DELAY(150); 2331 2332 /* enable CPU FDI TX and PCH FDI RX */ 2333 reg = FDI_TX_CTL(pipe); 2334 temp = I915_READ(reg); 2335 temp &= ~(7 << 19); 2336 temp |= (intel_crtc->fdi_lanes - 1) << 19; 2337 temp &= ~FDI_LINK_TRAIN_NONE; 2338 temp |= FDI_LINK_TRAIN_PATTERN_1; 2339 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK; 2340 /* SNB-B */ 2341 temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B; 2342 I915_WRITE(reg, temp | FDI_TX_ENABLE); 2343 2344 reg = FDI_RX_CTL(pipe); 2345 temp = I915_READ(reg); 2346 if (HAS_PCH_CPT(dev)) { 2347 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT; 2348 temp |= FDI_LINK_TRAIN_PATTERN_1_CPT; 2349 } else { 2350 temp &= ~FDI_LINK_TRAIN_NONE; 2351 temp |= FDI_LINK_TRAIN_PATTERN_1; 2352 } 2353 I915_WRITE(reg, temp | FDI_RX_ENABLE); 2354 2355 POSTING_READ(reg); 2356 DELAY(150); 2357 2358 if (HAS_PCH_CPT(dev)) 2359 cpt_phase_pointer_enable(dev, pipe); 2360 2361 for (i = 0; i < 4; i++) { 2362 reg = FDI_TX_CTL(pipe); 2363 temp = I915_READ(reg); 2364 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK; 2365 temp |= snb_b_fdi_train_param[i]; 2366 I915_WRITE(reg, temp); 2367 2368 POSTING_READ(reg); 2369 DELAY(500); 2370 2371 for (retry = 0; retry < 5; retry++) { 2372 reg = FDI_RX_IIR(pipe); 2373 temp = I915_READ(reg); 2374 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp); 2375 2376 if (temp & FDI_RX_BIT_LOCK) { 2377 I915_WRITE(reg, temp | FDI_RX_BIT_LOCK); 2378 DRM_DEBUG_KMS("FDI train 1 done.\n"); 2379 break; 2380 } 2381 DELAY(50); 2382 } 2383 if (retry < 5) 2384 break; 2385 } 2386 if (i == 4) 2387 DRM_ERROR("FDI train 1 fail!\n"); 2388 2389 /* Train 2 */ 2390 reg = FDI_TX_CTL(pipe); 2391 temp = I915_READ(reg); 2392 temp &= ~FDI_LINK_TRAIN_NONE; 2393 temp |= FDI_LINK_TRAIN_PATTERN_2; 2394 if (IS_GEN6(dev)) { 2395 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK; 2396 /* SNB-B */ 2397 temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B; 2398 } 2399 I915_WRITE(reg, temp); 2400 2401 reg = FDI_RX_CTL(pipe); 2402 temp = I915_READ(reg); 2403 if (HAS_PCH_CPT(dev)) { 2404 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT; 2405 temp |= FDI_LINK_TRAIN_PATTERN_2_CPT; 2406 } else { 2407 temp &= ~FDI_LINK_TRAIN_NONE; 2408 temp |= FDI_LINK_TRAIN_PATTERN_2; 2409 } 2410 I915_WRITE(reg, temp); 2411 2412 POSTING_READ(reg); 2413 DELAY(150); 2414 2415 for (i = 0; i < 4; i++) { 2416 reg = FDI_TX_CTL(pipe); 2417 temp = I915_READ(reg); 2418 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK; 2419 temp |= snb_b_fdi_train_param[i]; 2420 I915_WRITE(reg, temp); 2421 2422 POSTING_READ(reg); 2423 DELAY(500); 2424 2425 for (retry = 0; retry < 5; retry++) { 2426 reg = FDI_RX_IIR(pipe); 2427 temp = I915_READ(reg); 2428 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp); 2429 2430 if (temp & FDI_RX_SYMBOL_LOCK) { 2431 I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK); 2432 DRM_DEBUG_KMS("FDI train 2 done.\n"); 2433 break; 2434 } 2435 DELAY(50); 2436 } 2437 if (retry < 5) 2438 break; 2439 } 2440 if (i == 4) 2441 DRM_ERROR("FDI train 2 fail!\n"); 2442 2443 DRM_DEBUG_KMS("FDI train done.\n"); 2444} 2445 2446/* Manual link training for Ivy Bridge A0 parts */ 2447static void ivb_manual_fdi_link_train(struct drm_crtc *crtc) 2448{ 2449 struct drm_device *dev = crtc->dev; 2450 struct drm_i915_private *dev_priv = dev->dev_private; 2451 struct intel_crtc *intel_crtc = to_intel_crtc(crtc); 2452 int pipe = intel_crtc->pipe; 2453 u32 reg, temp, i; 2454 2455 /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit 2456 for train result */ 2457 reg = FDI_RX_IMR(pipe); 2458 temp = I915_READ(reg); 2459 temp &= ~FDI_RX_SYMBOL_LOCK; 2460 temp &= ~FDI_RX_BIT_LOCK; 2461 I915_WRITE(reg, temp); 2462 2463 POSTING_READ(reg); 2464 DELAY(150); 2465 2466 /* enable CPU FDI TX and PCH FDI RX */ 2467 reg = FDI_TX_CTL(pipe); 2468 temp = I915_READ(reg); 2469 temp &= ~(7 << 19); 2470 temp |= (intel_crtc->fdi_lanes - 1) << 19; 2471 temp &= ~(FDI_LINK_TRAIN_AUTO | FDI_LINK_TRAIN_NONE_IVB); 2472 temp |= FDI_LINK_TRAIN_PATTERN_1_IVB; 2473 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK; 2474 temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B; 2475 temp |= FDI_COMPOSITE_SYNC; 2476 I915_WRITE(reg, temp | FDI_TX_ENABLE); 2477 2478 reg = FDI_RX_CTL(pipe); 2479 temp = I915_READ(reg); 2480 temp &= ~FDI_LINK_TRAIN_AUTO; 2481 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT; 2482 temp |= FDI_LINK_TRAIN_PATTERN_1_CPT; 2483 temp |= FDI_COMPOSITE_SYNC; 2484 I915_WRITE(reg, temp | FDI_RX_ENABLE); 2485 2486 POSTING_READ(reg); 2487 DELAY(150); 2488 2489 for (i = 0; i < 4; i++) { 2490 reg = FDI_TX_CTL(pipe); 2491 temp = I915_READ(reg); 2492 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK; 2493 temp |= snb_b_fdi_train_param[i]; 2494 I915_WRITE(reg, temp); 2495 2496 POSTING_READ(reg); 2497 DELAY(500); 2498 2499 reg = FDI_RX_IIR(pipe); 2500 temp = I915_READ(reg); 2501 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp); 2502 2503 if (temp & FDI_RX_BIT_LOCK || 2504 (I915_READ(reg) & FDI_RX_BIT_LOCK)) { 2505 I915_WRITE(reg, temp | FDI_RX_BIT_LOCK); 2506 DRM_DEBUG_KMS("FDI train 1 done.\n"); 2507 break; 2508 } 2509 } 2510 if (i == 4) 2511 DRM_ERROR("FDI train 1 fail!\n"); 2512 2513 /* Train 2 */ 2514 reg = FDI_TX_CTL(pipe); 2515 temp = I915_READ(reg); 2516 temp &= ~FDI_LINK_TRAIN_NONE_IVB; 2517 temp |= FDI_LINK_TRAIN_PATTERN_2_IVB; 2518 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK; 2519 temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B; 2520 I915_WRITE(reg, temp); 2521 2522 reg = FDI_RX_CTL(pipe); 2523 temp = I915_READ(reg); 2524 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT; 2525 temp |= FDI_LINK_TRAIN_PATTERN_2_CPT; 2526 I915_WRITE(reg, temp); 2527 2528 POSTING_READ(reg); 2529 DELAY(150); 2530 2531 for (i = 0; i < 4; i++ ) { 2532 reg = FDI_TX_CTL(pipe); 2533 temp = I915_READ(reg); 2534 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK; 2535 temp |= snb_b_fdi_train_param[i]; 2536 I915_WRITE(reg, temp); 2537 2538 POSTING_READ(reg); 2539 DELAY(500); 2540 2541 reg = FDI_RX_IIR(pipe); 2542 temp = I915_READ(reg); 2543 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp); 2544 2545 if (temp & FDI_RX_SYMBOL_LOCK) { 2546 I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK); 2547 DRM_DEBUG_KMS("FDI train 2 done.\n"); 2548 break; 2549 } 2550 } 2551 if (i == 4) 2552 DRM_ERROR("FDI train 2 fail!\n"); 2553 2554 DRM_DEBUG_KMS("FDI train done.\n"); 2555} 2556 2557static void ironlake_fdi_pll_enable(struct drm_crtc *crtc) 2558{ 2559 struct drm_device *dev = crtc->dev; 2560 struct drm_i915_private *dev_priv = dev->dev_private; 2561 struct intel_crtc *intel_crtc = to_intel_crtc(crtc); 2562 int pipe = intel_crtc->pipe; 2563 u32 reg, temp; 2564 2565 /* Write the TU size bits so error detection works */ 2566 I915_WRITE(FDI_RX_TUSIZE1(pipe), 2567 I915_READ(PIPE_DATA_M1(pipe)) & TU_SIZE_MASK); 2568 2569 /* enable PCH FDI RX PLL, wait warmup plus DMI latency */ 2570 reg = FDI_RX_CTL(pipe); 2571 temp = I915_READ(reg); 2572 temp &= ~((0x7 << 19) | (0x7 << 16)); 2573 temp |= (intel_crtc->fdi_lanes - 1) << 19; 2574 temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11; 2575 I915_WRITE(reg, temp | FDI_RX_PLL_ENABLE); 2576 2577 POSTING_READ(reg); 2578 DELAY(200); 2579 2580 /* Switch from Rawclk to PCDclk */ 2581 temp = I915_READ(reg); 2582 I915_WRITE(reg, temp | FDI_PCDCLK); 2583 2584 POSTING_READ(reg); 2585 DELAY(200); 2586 2587 /* On Haswell, the PLL configuration for ports and pipes is handled 2588 * separately, as part of DDI setup */ 2589 if (!IS_HASWELL(dev)) { 2590 /* Enable CPU FDI TX PLL, always on for Ironlake */ 2591 reg = FDI_TX_CTL(pipe); 2592 temp = I915_READ(reg); 2593 if ((temp & FDI_TX_PLL_ENABLE) == 0) { 2594 I915_WRITE(reg, temp | FDI_TX_PLL_ENABLE); 2595 2596 POSTING_READ(reg); 2597 DELAY(100); 2598 } 2599 } 2600} 2601 2602static void cpt_phase_pointer_disable(struct drm_device *dev, int pipe) 2603{ 2604 struct drm_i915_private *dev_priv = dev->dev_private; 2605 u32 flags = I915_READ(SOUTH_CHICKEN1); 2606 2607 flags &= ~(FDI_PHASE_SYNC_EN(pipe)); 2608 I915_WRITE(SOUTH_CHICKEN1, flags); /* once to disable... */ 2609 flags &= ~(FDI_PHASE_SYNC_OVR(pipe)); 2610 I915_WRITE(SOUTH_CHICKEN1, flags); /* then again to lock */ 2611 POSTING_READ(SOUTH_CHICKEN1); 2612} 2613 2614static void ironlake_fdi_disable(struct drm_crtc *crtc) 2615{ 2616 struct drm_device *dev = crtc->dev; 2617 struct drm_i915_private *dev_priv = dev->dev_private; 2618 struct intel_crtc *intel_crtc = to_intel_crtc(crtc); 2619 int pipe = intel_crtc->pipe; 2620 u32 reg, temp; 2621 2622 /* disable CPU FDI tx and PCH FDI rx */ 2623 reg = FDI_TX_CTL(pipe); 2624 temp = I915_READ(reg); 2625 I915_WRITE(reg, temp & ~FDI_TX_ENABLE); 2626 POSTING_READ(reg); 2627 2628 reg = FDI_RX_CTL(pipe); 2629 temp = I915_READ(reg); 2630 temp &= ~(0x7 << 16); 2631 temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11; 2632 I915_WRITE(reg, temp & ~FDI_RX_ENABLE); 2633 2634 POSTING_READ(reg); 2635 DELAY(100); 2636 2637 /* Ironlake workaround, disable clock pointer after downing FDI */ 2638 if (HAS_PCH_IBX(dev)) { 2639 I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR); 2640 I915_WRITE(FDI_RX_CHICKEN(pipe), 2641 I915_READ(FDI_RX_CHICKEN(pipe) & 2642 ~FDI_RX_PHASE_SYNC_POINTER_EN)); 2643 } else if (HAS_PCH_CPT(dev)) { 2644 cpt_phase_pointer_disable(dev, pipe); 2645 } 2646 2647 /* still set train pattern 1 */ 2648 reg = FDI_TX_CTL(pipe); 2649 temp = I915_READ(reg); 2650 temp &= ~FDI_LINK_TRAIN_NONE; 2651 temp |= FDI_LINK_TRAIN_PATTERN_1; 2652 I915_WRITE(reg, temp); 2653 2654 reg = FDI_RX_CTL(pipe); 2655 temp = I915_READ(reg); 2656 if (HAS_PCH_CPT(dev)) { 2657 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT; 2658 temp |= FDI_LINK_TRAIN_PATTERN_1_CPT; 2659 } else { 2660 temp &= ~FDI_LINK_TRAIN_NONE; 2661 temp |= FDI_LINK_TRAIN_PATTERN_1; 2662 } 2663 /* BPC in FDI rx is consistent with that in PIPECONF */ 2664 temp &= ~(0x07 << 16); 2665 temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11; 2666 I915_WRITE(reg, temp); 2667 2668 POSTING_READ(reg); 2669 DELAY(100); 2670} 2671 2672static void intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc) 2673{ 2674 struct drm_device *dev = crtc->dev; 2675 2676 if (crtc->fb == NULL) 2677 return; 2678 2679 DRM_LOCK(dev); 2680 intel_finish_fb(crtc->fb); 2681 DRM_UNLOCK(dev); 2682} 2683 2684static bool intel_crtc_driving_pch(struct drm_crtc *crtc) 2685{ 2686 struct drm_device *dev = crtc->dev; 2687 struct drm_mode_config *mode_config = &dev->mode_config; 2688 struct intel_encoder *encoder; 2689 2690 /* 2691 * If there's a non-PCH eDP on this crtc, it must be DP_A, and that 2692 * must be driven by its own crtc; no sharing is possible. 2693 */ 2694 list_for_each_entry(encoder, &mode_config->encoder_list, base.head) { 2695 if (encoder->base.crtc != crtc) 2696 continue; 2697 2698 /* On Haswell, LPT PCH handles the VGA connection via FDI, and Haswell 2699 * CPU handles all others */ 2700 if (IS_HASWELL(dev)) { 2701 /* It is still unclear how this will work on PPT, so throw up a warning */ 2702 if (!HAS_PCH_LPT(dev)) 2703 DRM_DEBUG_KMS("Haswell: PPT\n"); 2704 2705 if (encoder->type == DRM_MODE_ENCODER_DAC) { 2706 DRM_DEBUG_KMS("Haswell detected DAC encoder, assuming is PCH\n"); 2707 return true; 2708 } else { 2709 DRM_DEBUG_KMS("Haswell detected encoder %d, assuming is CPU\n", 2710 encoder->type); 2711 return false; 2712 } 2713 } 2714 2715 switch (encoder->type) { 2716 case INTEL_OUTPUT_EDP: 2717 if (!intel_encoder_is_pch_edp(&encoder->base)) 2718 return false; 2719 continue; 2720 } 2721 } 2722 2723 return true; 2724} 2725 2726/* Program iCLKIP clock to the desired frequency */ 2727static void lpt_program_iclkip(struct drm_crtc *crtc) 2728{ 2729 struct drm_device *dev = crtc->dev; 2730 struct drm_i915_private *dev_priv = dev->dev_private; 2731 u32 divsel, phaseinc, auxdiv, phasedir = 0; 2732 u32 temp; 2733 2734 /* It is necessary to ungate the pixclk gate prior to programming 2735 * the divisors, and gate it back when it is done. 2736 */ 2737 I915_WRITE(PIXCLK_GATE, PIXCLK_GATE_GATE); 2738 2739 /* Disable SSCCTL */ 2740 intel_sbi_write(dev_priv, SBI_SSCCTL6, 2741 intel_sbi_read(dev_priv, SBI_SSCCTL6) | 2742 SBI_SSCCTL_DISABLE); 2743 2744 /* 20MHz is a corner case which is out of range for the 7-bit divisor */ 2745 if (crtc->mode.clock == 20000) { 2746 auxdiv = 1; 2747 divsel = 0x41; 2748 phaseinc = 0x20; 2749 } else { 2750 /* The iCLK virtual clock root frequency is in MHz, 2751 * but the crtc->mode.clock in in KHz. To get the divisors, 2752 * it is necessary to divide one by another, so we 2753 * convert the virtual clock precision to KHz here for higher 2754 * precision. 2755 */ 2756 u32 iclk_virtual_root_freq = 172800 * 1000; 2757 u32 iclk_pi_range = 64; 2758 u32 desired_divisor, msb_divisor_value, pi_value; 2759 2760 desired_divisor = (iclk_virtual_root_freq / crtc->mode.clock); 2761 msb_divisor_value = desired_divisor / iclk_pi_range; 2762 pi_value = desired_divisor % iclk_pi_range; 2763 2764 auxdiv = 0; 2765 divsel = msb_divisor_value - 2; 2766 phaseinc = pi_value; 2767 } 2768 2769 /* This should not happen with any sane values */ 2770 if ((SBI_SSCDIVINTPHASE_DIVSEL(divsel) & 2771 ~SBI_SSCDIVINTPHASE_DIVSEL_MASK)) 2772 DRM_DEBUG_KMS("DIVSEL_MASK"); 2773 if ((SBI_SSCDIVINTPHASE_DIR(phasedir) & 2774 ~SBI_SSCDIVINTPHASE_INCVAL_MASK)) 2775 DRM_DEBUG_KMS("INCVAL_MASK"); 2776 2777 DRM_DEBUG_KMS("iCLKIP clock: found settings for %dKHz refresh rate: auxdiv=%x, divsel=%x, phasedir=%x, phaseinc=%x\n", 2778 crtc->mode.clock, 2779 auxdiv, 2780 divsel, 2781 phasedir, 2782 phaseinc); 2783 2784 /* Program SSCDIVINTPHASE6 */ 2785 temp = intel_sbi_read(dev_priv, SBI_SSCDIVINTPHASE6); 2786 temp &= ~SBI_SSCDIVINTPHASE_DIVSEL_MASK; 2787 temp |= SBI_SSCDIVINTPHASE_DIVSEL(divsel); 2788 temp &= ~SBI_SSCDIVINTPHASE_INCVAL_MASK; 2789 temp |= SBI_SSCDIVINTPHASE_INCVAL(phaseinc); 2790 temp |= SBI_SSCDIVINTPHASE_DIR(phasedir); 2791 temp |= SBI_SSCDIVINTPHASE_PROPAGATE; 2792 2793 intel_sbi_write(dev_priv, 2794 SBI_SSCDIVINTPHASE6, 2795 temp); 2796 2797 /* Program SSCAUXDIV */ 2798 temp = intel_sbi_read(dev_priv, SBI_SSCAUXDIV6); 2799 temp &= ~SBI_SSCAUXDIV_FINALDIV2SEL(1); 2800 temp |= SBI_SSCAUXDIV_FINALDIV2SEL(auxdiv); 2801 intel_sbi_write(dev_priv, 2802 SBI_SSCAUXDIV6, 2803 temp); 2804 2805 2806 /* Enable modulator and associated divider */ 2807 temp = intel_sbi_read(dev_priv, SBI_SSCCTL6); 2808 temp &= ~SBI_SSCCTL_DISABLE; 2809 intel_sbi_write(dev_priv, 2810 SBI_SSCCTL6, 2811 temp); 2812 2813 /* Wait for initialization time */ 2814 DELAY(24); 2815 2816 I915_WRITE(PIXCLK_GATE, PIXCLK_GATE_UNGATE); 2817} 2818 2819/* 2820 * Enable PCH resources required for PCH ports: 2821 * - PCH PLLs 2822 * - FDI training & RX/TX 2823 * - update transcoder timings 2824 * - DP transcoding bits 2825 * - transcoder 2826 */ 2827static void ironlake_pch_enable(struct drm_crtc *crtc) 2828{ 2829 struct drm_device *dev = crtc->dev; 2830 struct drm_i915_private *dev_priv = dev->dev_private; 2831 struct intel_crtc *intel_crtc = to_intel_crtc(crtc); 2832 int pipe = intel_crtc->pipe; 2833 u32 reg, temp; 2834 2835 assert_transcoder_disabled(dev_priv, pipe); 2836 2837 /* For PCH output, training FDI link */ 2838 dev_priv->display.fdi_link_train(crtc); 2839 2840 intel_enable_pch_pll(intel_crtc); 2841 2842 if (HAS_PCH_LPT(dev)) { 2843 DRM_DEBUG_KMS("LPT detected: programming iCLKIP\n"); 2844 lpt_program_iclkip(crtc); 2845 } else if (HAS_PCH_CPT(dev)) { 2846 u32 sel; 2847 2848 temp = I915_READ(PCH_DPLL_SEL); 2849 switch (pipe) { 2850 default: 2851 case 0: 2852 temp |= TRANSA_DPLL_ENABLE; 2853 sel = TRANSA_DPLLB_SEL; 2854 break; 2855 case 1: 2856 temp |= TRANSB_DPLL_ENABLE; 2857 sel = TRANSB_DPLLB_SEL; 2858 break; 2859 case 2: 2860 temp |= TRANSC_DPLL_ENABLE; 2861 sel = TRANSC_DPLLB_SEL; 2862 break; 2863 } 2864 if (intel_crtc->pch_pll->pll_reg == _PCH_DPLL_B) 2865 temp |= sel; 2866 else 2867 temp &= ~sel; 2868 I915_WRITE(PCH_DPLL_SEL, temp); 2869 } 2870 2871 /* set transcoder timing, panel must allow it */ 2872 assert_panel_unlocked(dev_priv, pipe); 2873 I915_WRITE(TRANS_HTOTAL(pipe), I915_READ(HTOTAL(pipe))); 2874 I915_WRITE(TRANS_HBLANK(pipe), I915_READ(HBLANK(pipe))); 2875 I915_WRITE(TRANS_HSYNC(pipe), I915_READ(HSYNC(pipe))); 2876 2877 I915_WRITE(TRANS_VTOTAL(pipe), I915_READ(VTOTAL(pipe))); 2878 I915_WRITE(TRANS_VBLANK(pipe), I915_READ(VBLANK(pipe))); 2879 I915_WRITE(TRANS_VSYNC(pipe), I915_READ(VSYNC(pipe))); 2880 I915_WRITE(TRANS_VSYNCSHIFT(pipe), I915_READ(VSYNCSHIFT(pipe))); 2881 2882 if (!IS_HASWELL(dev)) 2883 intel_fdi_normal_train(crtc); 2884 2885 /* For PCH DP, enable TRANS_DP_CTL */ 2886 if (HAS_PCH_CPT(dev) && 2887 (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) || 2888 intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))) { 2889 u32 bpc = (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) >> 5; 2890 reg = TRANS_DP_CTL(pipe); 2891 temp = I915_READ(reg); 2892 temp &= ~(TRANS_DP_PORT_SEL_MASK | 2893 TRANS_DP_SYNC_MASK | 2894 TRANS_DP_BPC_MASK); 2895 temp |= (TRANS_DP_OUTPUT_ENABLE | 2896 TRANS_DP_ENH_FRAMING); 2897 temp |= bpc << 9; /* same format but at 11:9 */ 2898 2899 if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC) 2900 temp |= TRANS_DP_HSYNC_ACTIVE_HIGH; 2901 if (crtc->mode.flags & DRM_MODE_FLAG_PVSYNC) 2902 temp |= TRANS_DP_VSYNC_ACTIVE_HIGH; 2903 2904 switch (intel_trans_dp_port_sel(crtc)) { 2905 case PCH_DP_B: 2906 temp |= TRANS_DP_PORT_SEL_B; 2907 break; 2908 case PCH_DP_C: 2909 temp |= TRANS_DP_PORT_SEL_C; 2910 break; 2911 case PCH_DP_D: 2912 temp |= TRANS_DP_PORT_SEL_D; 2913 break; 2914 default: 2915 DRM_DEBUG_KMS("Wrong PCH DP port return. Guess port B\n"); 2916 temp |= TRANS_DP_PORT_SEL_B; 2917 break; 2918 } 2919 2920 I915_WRITE(reg, temp); 2921 } 2922 2923 intel_enable_transcoder(dev_priv, pipe); 2924} 2925 2926static void intel_put_pch_pll(struct intel_crtc *intel_crtc) 2927{ 2928 struct intel_pch_pll *pll = intel_crtc->pch_pll; 2929 2930 if (pll == NULL) 2931 return; 2932 2933 if (pll->refcount == 0) { 2934 printf("bad PCH PLL refcount\n"); 2935 return; 2936 } 2937 2938 --pll->refcount; 2939 intel_crtc->pch_pll = NULL; 2940} 2941 2942static struct intel_pch_pll *intel_get_pch_pll(struct intel_crtc *intel_crtc, u32 dpll, u32 fp) 2943{ 2944 struct drm_i915_private *dev_priv = intel_crtc->base.dev->dev_private; 2945 struct intel_pch_pll *pll; 2946 int i; 2947 2948 pll = intel_crtc->pch_pll; 2949 if (pll) { 2950 DRM_DEBUG_KMS("CRTC:%d reusing existing PCH PLL %x\n", 2951 intel_crtc->base.base.id, pll->pll_reg); 2952 goto prepare; 2953 } 2954 2955 if (HAS_PCH_IBX(dev_priv->dev)) { 2956 /* Ironlake PCH has a fixed PLL->PCH pipe mapping. */ 2957 i = intel_crtc->pipe; 2958 pll = &dev_priv->pch_plls[i]; 2959 2960 DRM_DEBUG_KMS("CRTC:%d using pre-allocated PCH PLL %x\n", 2961 intel_crtc->base.base.id, pll->pll_reg); 2962 2963 goto found; 2964 } 2965 2966 for (i = 0; i < dev_priv->num_pch_pll; i++) { 2967 pll = &dev_priv->pch_plls[i]; 2968 2969 /* Only want to check enabled timings first */ 2970 if (pll->refcount == 0) 2971 continue; 2972 2973 if (dpll == (I915_READ(pll->pll_reg) & 0x7fffffff) && 2974 fp == I915_READ(pll->fp0_reg)) { 2975 DRM_DEBUG_KMS("CRTC:%d sharing existing PCH PLL %x (refcount %d, ative %d)\n", 2976 intel_crtc->base.base.id, 2977 pll->pll_reg, pll->refcount, pll->active); 2978 2979 goto found; 2980 } 2981 } 2982 2983 /* Ok no matching timings, maybe there's a free one? */ 2984 for (i = 0; i < dev_priv->num_pch_pll; i++) { /* XXXKIB: HACK */ 2985 pll = &dev_priv->pch_plls[i]; 2986 if (pll->refcount == 0) { 2987 DRM_DEBUG_KMS("CRTC:%d allocated PCH PLL %x\n", 2988 intel_crtc->base.base.id, pll->pll_reg); 2989 goto found; 2990 } 2991 } 2992 2993 return NULL; 2994 2995found: 2996 intel_crtc->pch_pll = pll; 2997 pll->refcount++; 2998 DRM_DEBUG_DRIVER("using pll %d for pipe %d\n", i, intel_crtc->pipe); 2999prepare: /* separate function? */ 3000 DRM_DEBUG_DRIVER("switching PLL %x off\n", pll->pll_reg); 3001 3002 /* Wait for the clocks to stabilize before rewriting the regs */ 3003 I915_WRITE(pll->pll_reg, dpll & ~DPLL_VCO_ENABLE); 3004 POSTING_READ(pll->pll_reg); 3005 DELAY(150); 3006 3007 I915_WRITE(pll->fp0_reg, fp); 3008 I915_WRITE(pll->pll_reg, dpll & ~DPLL_VCO_ENABLE); 3009 pll->on = false; 3010 return pll; 3011} 3012 3013void intel_cpt_verify_modeset(struct drm_device *dev, int pipe) 3014{ 3015 struct drm_i915_private *dev_priv = dev->dev_private; 3016 int dslreg = PIPEDSL(pipe), tc2reg = TRANS_CHICKEN2(pipe); 3017 u32 temp; 3018 3019 temp = I915_READ(dslreg); 3020 DELAY(500); 3021 if (_intel_wait_for(dev, I915_READ(dslreg) != temp, 5, 1, "915cp1")) { 3022 /* Without this, mode sets may fail silently on FDI */ 3023 I915_WRITE(tc2reg, TRANS_AUTOTRAIN_GEN_STALL_DIS); 3024 DELAY(250); 3025 I915_WRITE(tc2reg, 0); 3026 if (_intel_wait_for(dev, I915_READ(dslreg) != temp, 5, 1, 3027 "915cp2")) 3028 DRM_ERROR("mode set failed: pipe %d stuck\n", pipe); 3029 } 3030} 3031 3032static void ironlake_crtc_enable(struct drm_crtc *crtc) 3033{ 3034 struct drm_device *dev = crtc->dev; 3035 struct drm_i915_private *dev_priv = dev->dev_private; 3036 struct intel_crtc *intel_crtc = to_intel_crtc(crtc); 3037 int pipe = intel_crtc->pipe; 3038 int plane = intel_crtc->plane; 3039 u32 temp; 3040 bool is_pch_port; 3041 3042 if (intel_crtc->active) 3043 return; 3044 3045 intel_crtc->active = true; 3046 intel_update_watermarks(dev); 3047 3048 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { 3049 temp = I915_READ(PCH_LVDS); 3050 if ((temp & LVDS_PORT_EN) == 0) 3051 I915_WRITE(PCH_LVDS, temp | LVDS_PORT_EN); 3052 } 3053 3054 is_pch_port = intel_crtc_driving_pch(crtc); 3055 3056 if (is_pch_port) 3057 ironlake_fdi_pll_enable(crtc); 3058 else 3059 ironlake_fdi_disable(crtc); 3060 3061 /* Enable panel fitting for LVDS */ 3062 if (dev_priv->pch_pf_size && 3063 (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) || HAS_eDP)) { 3064 /* Force use of hard-coded filter coefficients 3065 * as some pre-programmed values are broken, 3066 * e.g. x201. 3067 */ 3068 I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3); 3069 I915_WRITE(PF_WIN_POS(pipe), dev_priv->pch_pf_pos); 3070 I915_WRITE(PF_WIN_SZ(pipe), dev_priv->pch_pf_size); 3071 } 3072 3073 intel_enable_pipe(dev_priv, pipe, is_pch_port); 3074 intel_enable_plane(dev_priv, plane, pipe); 3075 3076 if (is_pch_port) 3077 ironlake_pch_enable(crtc); 3078 3079 intel_crtc_load_lut(crtc); 3080 3081 DRM_LOCK(dev); 3082 intel_update_fbc(dev); 3083 DRM_UNLOCK(dev); 3084 3085 intel_crtc_update_cursor(crtc, true); 3086} 3087 3088static void ironlake_crtc_disable(struct drm_crtc *crtc) 3089{ 3090 struct drm_device *dev = crtc->dev; 3091 struct drm_i915_private *dev_priv = dev->dev_private; 3092 struct intel_crtc *intel_crtc = to_intel_crtc(crtc); 3093 int pipe = intel_crtc->pipe; 3094 int plane = intel_crtc->plane; 3095 u32 reg, temp; 3096 3097 if (!intel_crtc->active) 3098 return; 3099 3100 intel_crtc_wait_for_pending_flips(crtc); 3101 drm_vblank_off(dev, pipe); 3102 intel_crtc_update_cursor(crtc, false); 3103 3104 intel_disable_plane(dev_priv, plane, pipe); 3105 3106 if (dev_priv->cfb_plane == plane) 3107 intel_disable_fbc(dev); 3108 3109 intel_disable_pipe(dev_priv, pipe); 3110 3111 /* Disable PF */ 3112 I915_WRITE(PF_CTL(pipe), 0); 3113 I915_WRITE(PF_WIN_SZ(pipe), 0); 3114 3115 ironlake_fdi_disable(crtc); 3116 3117 /* This is a horrible layering violation; we should be doing this in 3118 * the connector/encoder ->prepare instead, but we don't always have 3119 * enough information there about the config to know whether it will 3120 * actually be necessary or just cause undesired flicker. 3121 */ 3122 intel_disable_pch_ports(dev_priv, pipe); 3123 3124 intel_disable_transcoder(dev_priv, pipe); 3125 3126 if (HAS_PCH_CPT(dev)) { 3127 /* disable TRANS_DP_CTL */ 3128 reg = TRANS_DP_CTL(pipe); 3129 temp = I915_READ(reg); 3130 temp &= ~(TRANS_DP_OUTPUT_ENABLE | TRANS_DP_PORT_SEL_MASK); 3131 temp |= TRANS_DP_PORT_SEL_NONE; 3132 I915_WRITE(reg, temp); 3133 3134 /* disable DPLL_SEL */ 3135 temp = I915_READ(PCH_DPLL_SEL); 3136 switch (pipe) { 3137 case 0: 3138 temp &= ~(TRANSA_DPLL_ENABLE | TRANSA_DPLLB_SEL); 3139 break; 3140 case 1: 3141 temp &= ~(TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL); 3142 break; 3143 case 2: 3144 /* C shares PLL A or B */ 3145 temp &= ~(TRANSC_DPLL_ENABLE | TRANSC_DPLLB_SEL); 3146 break; 3147 default: 3148 KASSERT(1, ("Wrong pipe %d", pipe)); /* wtf */ 3149 } 3150 I915_WRITE(PCH_DPLL_SEL, temp); 3151 } 3152 3153 /* disable PCH DPLL */ 3154 intel_disable_pch_pll(intel_crtc); 3155 3156 /* Switch from PCDclk to Rawclk */ 3157 reg = FDI_RX_CTL(pipe); 3158 temp = I915_READ(reg); 3159 I915_WRITE(reg, temp & ~FDI_PCDCLK); 3160 3161 /* Disable CPU FDI TX PLL */ 3162 reg = FDI_TX_CTL(pipe); 3163 temp = I915_READ(reg); 3164 I915_WRITE(reg, temp & ~FDI_TX_PLL_ENABLE); 3165 3166 POSTING_READ(reg); 3167 DELAY(100); 3168 3169 reg = FDI_RX_CTL(pipe); 3170 temp = I915_READ(reg); 3171 I915_WRITE(reg, temp & ~FDI_RX_PLL_ENABLE); 3172 3173 /* Wait for the clocks to turn off. */ 3174 POSTING_READ(reg); 3175 DELAY(100); 3176 3177 intel_crtc->active = false; 3178 intel_update_watermarks(dev); 3179 3180 DRM_LOCK(dev); 3181 intel_update_fbc(dev); 3182 DRM_UNLOCK(dev); 3183} 3184 3185static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode) 3186{ 3187 struct intel_crtc *intel_crtc = to_intel_crtc(crtc); 3188 int pipe = intel_crtc->pipe; 3189 int plane = intel_crtc->plane; 3190 3191 /* XXX: When our outputs are all unaware of DPMS modes other than off 3192 * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC. 3193 */ 3194 switch (mode) { 3195 case DRM_MODE_DPMS_ON: 3196 case DRM_MODE_DPMS_STANDBY: 3197 case DRM_MODE_DPMS_SUSPEND: 3198 DRM_DEBUG_KMS("crtc %d/%d dpms on\n", pipe, plane); 3199 ironlake_crtc_enable(crtc); 3200 break; 3201 3202 case DRM_MODE_DPMS_OFF: 3203 DRM_DEBUG_KMS("crtc %d/%d dpms off\n", pipe, plane); 3204 ironlake_crtc_disable(crtc); 3205 break; 3206 } 3207} 3208 3209static void ironlake_crtc_off(struct drm_crtc *crtc) 3210{ 3211 struct intel_crtc *intel_crtc = to_intel_crtc(crtc); 3212 intel_put_pch_pll(intel_crtc); 3213} 3214 3215static void intel_crtc_dpms_overlay(struct intel_crtc *intel_crtc, bool enable) 3216{ 3217 if (!enable && intel_crtc->overlay) { 3218 struct drm_device *dev = intel_crtc->base.dev; 3219 struct drm_i915_private *dev_priv = dev->dev_private; 3220 3221 DRM_LOCK(dev); 3222 dev_priv->mm.interruptible = false; 3223 (void) intel_overlay_switch_off(intel_crtc->overlay); 3224 dev_priv->mm.interruptible = true; 3225 DRM_UNLOCK(dev); 3226 } 3227 3228 /* Let userspace switch the overlay on again. In most cases userspace 3229 * has to recompute where to put it anyway. 3230 */ 3231} 3232 3233static void i9xx_crtc_enable(struct drm_crtc *crtc) 3234{ 3235 struct drm_device *dev = crtc->dev; 3236 struct drm_i915_private *dev_priv = dev->dev_private; 3237 struct intel_crtc *intel_crtc = to_intel_crtc(crtc); 3238 int pipe = intel_crtc->pipe; 3239 int plane = intel_crtc->plane; 3240 3241 if (intel_crtc->active) 3242 return; 3243 3244 intel_crtc->active = true; 3245 intel_update_watermarks(dev); 3246 3247 intel_enable_pll(dev_priv, pipe); 3248 intel_enable_pipe(dev_priv, pipe, false); 3249 intel_enable_plane(dev_priv, plane, pipe); 3250 3251 intel_crtc_load_lut(crtc); 3252 intel_update_fbc(dev); 3253 3254 /* Give the overlay scaler a chance to enable if it's on this pipe */ 3255 intel_crtc_dpms_overlay(intel_crtc, true); 3256 intel_crtc_update_cursor(crtc, true); 3257} 3258 3259static void i9xx_crtc_disable(struct drm_crtc *crtc) 3260{ 3261 struct drm_device *dev = crtc->dev; 3262 struct drm_i915_private *dev_priv = dev->dev_private; 3263 struct intel_crtc *intel_crtc = to_intel_crtc(crtc); 3264 int pipe = intel_crtc->pipe; 3265 int plane = intel_crtc->plane; 3266 3267 if (!intel_crtc->active) 3268 return; 3269 3270 /* Give the overlay scaler a chance to disable if it's on this pipe */ 3271 intel_crtc_wait_for_pending_flips(crtc); 3272 drm_vblank_off(dev, pipe); 3273 intel_crtc_dpms_overlay(intel_crtc, false); 3274 intel_crtc_update_cursor(crtc, false); 3275 3276 if (dev_priv->cfb_plane == plane) 3277 intel_disable_fbc(dev); 3278 3279 intel_disable_plane(dev_priv, plane, pipe); 3280 intel_disable_pipe(dev_priv, pipe); 3281 intel_disable_pll(dev_priv, pipe); 3282 3283 intel_crtc->active = false; 3284 intel_update_fbc(dev); 3285 intel_update_watermarks(dev); 3286} 3287 3288static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode) 3289{ 3290 /* XXX: When our outputs are all unaware of DPMS modes other than off 3291 * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC. 3292 */ 3293 switch (mode) { 3294 case DRM_MODE_DPMS_ON: 3295 case DRM_MODE_DPMS_STANDBY: 3296 case DRM_MODE_DPMS_SUSPEND: 3297 i9xx_crtc_enable(crtc); 3298 break; 3299 case DRM_MODE_DPMS_OFF: 3300 i9xx_crtc_disable(crtc); 3301 break; 3302 } 3303} 3304 3305static void i9xx_crtc_off(struct drm_crtc *crtc) 3306{ 3307} 3308 3309/** 3310 * Sets the power management mode of the pipe and plane. 3311 */ 3312static void intel_crtc_dpms(struct drm_crtc *crtc, int mode) 3313{ 3314 struct drm_device *dev = crtc->dev; 3315 struct drm_i915_private *dev_priv = dev->dev_private; 3316 struct drm_i915_master_private *master_priv; 3317 struct intel_crtc *intel_crtc = to_intel_crtc(crtc); 3318 int pipe = intel_crtc->pipe; 3319 bool enabled; 3320 3321 if (intel_crtc->dpms_mode == mode) 3322 return; 3323 3324 intel_crtc->dpms_mode = mode; 3325 3326 dev_priv->display.dpms(crtc, mode); 3327 3328 if (!dev->primary->master) 3329 return; 3330 3331 master_priv = dev->primary->master->driver_priv; 3332 if (!master_priv->sarea_priv) 3333 return; 3334 3335 enabled = crtc->enabled && mode != DRM_MODE_DPMS_OFF; 3336 3337 switch (pipe) { 3338 case 0: 3339 master_priv->sarea_priv->pipeA_w = enabled ? crtc->mode.hdisplay : 0; 3340 master_priv->sarea_priv->pipeA_h = enabled ? crtc->mode.vdisplay : 0; 3341 break; 3342 case 1: 3343 master_priv->sarea_priv->pipeB_w = enabled ? crtc->mode.hdisplay : 0; 3344 master_priv->sarea_priv->pipeB_h = enabled ? crtc->mode.vdisplay : 0; 3345 break; 3346 default: 3347 DRM_ERROR("Can't update pipe %c in SAREA\n", pipe_name(pipe)); 3348 break; 3349 } 3350} 3351 3352static void intel_crtc_disable(struct drm_crtc *crtc) 3353{ 3354 struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; 3355 struct drm_device *dev = crtc->dev; 3356 struct drm_i915_private *dev_priv = dev->dev_private; 3357 3358 crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF); 3359 dev_priv->display.off(crtc); 3360 3361 assert_plane_disabled(dev->dev_private, to_intel_crtc(crtc)->plane); 3362 assert_pipe_disabled(dev->dev_private, to_intel_crtc(crtc)->pipe); 3363 3364 if (crtc->fb) { 3365 DRM_LOCK(dev); 3366 intel_unpin_fb_obj(to_intel_framebuffer(crtc->fb)->obj); 3367 DRM_UNLOCK(dev); 3368 } 3369} 3370 3371/* Prepare for a mode set. 3372 * 3373 * Note we could be a lot smarter here. We need to figure out which outputs 3374 * will be enabled, which disabled (in short, how the config will changes) 3375 * and perform the minimum necessary steps to accomplish that, e.g. updating 3376 * watermarks, FBC configuration, making sure PLLs are programmed correctly, 3377 * panel fitting is in the proper state, etc. 3378 */ 3379static void i9xx_crtc_prepare(struct drm_crtc *crtc) 3380{ 3381 i9xx_crtc_disable(crtc); 3382} 3383 3384static void i9xx_crtc_commit(struct drm_crtc *crtc) 3385{ 3386 i9xx_crtc_enable(crtc); 3387} 3388 3389static void ironlake_crtc_prepare(struct drm_crtc *crtc) 3390{ 3391 ironlake_crtc_disable(crtc); 3392} 3393 3394static void ironlake_crtc_commit(struct drm_crtc *crtc) 3395{ 3396 ironlake_crtc_enable(crtc); 3397} 3398 3399void intel_encoder_prepare(struct drm_encoder *encoder) 3400{ 3401 struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private; 3402 /* lvds has its own version of prepare see intel_lvds_prepare */ 3403 encoder_funcs->dpms(encoder, DRM_MODE_DPMS_OFF); 3404} 3405 3406void intel_encoder_commit(struct drm_encoder *encoder) 3407{ 3408 struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private; 3409 struct drm_device *dev = encoder->dev; 3410 struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc); 3411 3412 /* lvds has its own version of commit see intel_lvds_commit */ 3413 encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON); 3414 3415 if (HAS_PCH_CPT(dev)) 3416 intel_cpt_verify_modeset(dev, intel_crtc->pipe); 3417} 3418 3419void intel_encoder_destroy(struct drm_encoder *encoder) 3420{ 3421 struct intel_encoder *intel_encoder = to_intel_encoder(encoder); 3422 3423 drm_encoder_cleanup(encoder); 3424 free(intel_encoder, DRM_MEM_KMS); 3425} 3426 3427static bool intel_crtc_mode_fixup(struct drm_crtc *crtc, 3428 const struct drm_display_mode *mode, 3429 struct drm_display_mode *adjusted_mode) 3430{ 3431 struct drm_device *dev = crtc->dev; 3432 3433 if (HAS_PCH_SPLIT(dev)) { 3434 /* FDI link clock is fixed at 2.7G */ 3435 if (mode->clock * 3 > IRONLAKE_FDI_FREQ * 4) 3436 return false; 3437 } 3438 3439 /* All interlaced capable intel hw wants timings in frames. Note though 3440 * that intel_lvds_mode_fixup does some funny tricks with the crtc 3441 * timings, so we need to be careful not to clobber these.*/ 3442 if (!(adjusted_mode->private_flags & INTEL_MODE_CRTC_TIMINGS_SET)) 3443 drm_mode_set_crtcinfo(adjusted_mode, 0); 3444 3445 return true; 3446} 3447 3448static int valleyview_get_display_clock_speed(struct drm_device *dev) 3449{ 3450 return 400000; /* FIXME */ 3451} 3452 3453static int i945_get_display_clock_speed(struct drm_device *dev) 3454{ 3455 return 400000; 3456} 3457 3458static int i915_get_display_clock_speed(struct drm_device *dev) 3459{ 3460 return 333000; 3461} 3462 3463static int i9xx_misc_get_display_clock_speed(struct drm_device *dev) 3464{ 3465 return 200000; 3466} 3467 3468static int i915gm_get_display_clock_speed(struct drm_device *dev) 3469{ 3470 u16 gcfgc = 0; 3471 3472 gcfgc = pci_read_config(dev->dev, GCFGC, 2); 3473 3474 if (gcfgc & GC_LOW_FREQUENCY_ENABLE) 3475 return 133000; 3476 else { 3477 switch (gcfgc & GC_DISPLAY_CLOCK_MASK) { 3478 case GC_DISPLAY_CLOCK_333_MHZ: 3479 return 333000; 3480 default: 3481 case GC_DISPLAY_CLOCK_190_200_MHZ: 3482 return 190000; 3483 } 3484 } 3485} 3486 3487static int i865_get_display_clock_speed(struct drm_device *dev) 3488{ 3489 return 266000; 3490} 3491 3492static int i855_get_display_clock_speed(struct drm_device *dev) 3493{ 3494 u16 hpllcc = 0; 3495 /* Assume that the hardware is in the high speed state. This 3496 * should be the default. 3497 */ 3498 switch (hpllcc & GC_CLOCK_CONTROL_MASK) { 3499 case GC_CLOCK_133_200: 3500 case GC_CLOCK_100_200: 3501 return 200000; 3502 case GC_CLOCK_166_250: 3503 return 250000; 3504 case GC_CLOCK_100_133: 3505 return 133000; 3506 } 3507 3508 /* Shouldn't happen */ 3509 return 0; 3510} 3511 3512static int i830_get_display_clock_speed(struct drm_device *dev) 3513{ 3514 return 133000; 3515} 3516 3517struct fdi_m_n { 3518 u32 tu; 3519 u32 gmch_m; 3520 u32 gmch_n; 3521 u32 link_m; 3522 u32 link_n; 3523}; 3524 3525static void 3526fdi_reduce_ratio(u32 *num, u32 *den) 3527{ 3528 while (*num > 0xffffff || *den > 0xffffff) { 3529 *num >>= 1; 3530 *den >>= 1; 3531 } 3532} 3533 3534static void 3535ironlake_compute_m_n(int bits_per_pixel, int nlanes, int pixel_clock, 3536 int link_clock, struct fdi_m_n *m_n) 3537{ 3538 m_n->tu = 64; /* default size */ 3539 3540 /* BUG_ON(pixel_clock > INT_MAX / 36); */ 3541 m_n->gmch_m = bits_per_pixel * pixel_clock; 3542 m_n->gmch_n = link_clock * nlanes * 8; 3543 fdi_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n); 3544 3545 m_n->link_m = pixel_clock; 3546 m_n->link_n = link_clock; 3547 fdi_reduce_ratio(&m_n->link_m, &m_n->link_n); 3548} 3549 3550static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv) 3551{ 3552 if (i915_panel_use_ssc >= 0) 3553 return i915_panel_use_ssc != 0; 3554 return dev_priv->lvds_use_ssc 3555 && !(dev_priv->quirks & QUIRK_LVDS_SSC_DISABLE); 3556} 3557 3558/** 3559 * intel_choose_pipe_bpp_dither - figure out what color depth the pipe should send 3560 * @crtc: CRTC structure 3561 * @mode: requested mode 3562 * 3563 * A pipe may be connected to one or more outputs. Based on the depth of the 3564 * attached framebuffer, choose a good color depth to use on the pipe. 3565 * 3566 * If possible, match the pipe depth to the fb depth. In some cases, this 3567 * isn't ideal, because the connected output supports a lesser or restricted 3568 * set of depths. Resolve that here: 3569 * LVDS typically supports only 6bpc, so clamp down in that case 3570 * HDMI supports only 8bpc or 12bpc, so clamp to 8bpc with dither for 10bpc 3571 * Displays may support a restricted set as well, check EDID and clamp as 3572 * appropriate. 3573 * DP may want to dither down to 6bpc to fit larger modes 3574 * 3575 * RETURNS: 3576 * Dithering requirement (i.e. false if display bpc and pipe bpc match, 3577 * true if they don't match). 3578 */ 3579static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, 3580 unsigned int *pipe_bpp, 3581 struct drm_display_mode *mode) 3582{ 3583 struct drm_device *dev = crtc->dev; 3584 struct drm_i915_private *dev_priv = dev->dev_private; 3585 struct drm_encoder *encoder; 3586 struct drm_connector *connector; 3587 unsigned int display_bpc = UINT_MAX, bpc; 3588 3589 /* Walk the encoders & connectors on this crtc, get min bpc */ 3590 list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { 3591 struct intel_encoder *intel_encoder = to_intel_encoder(encoder); 3592 3593 if (encoder->crtc != crtc) 3594 continue; 3595 3596 if (intel_encoder->type == INTEL_OUTPUT_LVDS) { 3597 unsigned int lvds_bpc; 3598 3599 if ((I915_READ(PCH_LVDS) & LVDS_A3_POWER_MASK) == 3600 LVDS_A3_POWER_UP) 3601 lvds_bpc = 8; 3602 else 3603 lvds_bpc = 6; 3604 3605 if (lvds_bpc < display_bpc) { 3606 DRM_DEBUG_KMS("clamping display bpc (was %d) to LVDS (%d)\n", display_bpc, lvds_bpc); 3607 display_bpc = lvds_bpc; 3608 } 3609 continue; 3610 } 3611 3612 if (intel_encoder->type == INTEL_OUTPUT_EDP) { 3613 /* Use VBT settings if we have an eDP panel */ 3614 unsigned int edp_bpc = dev_priv->edp.bpp / 3; 3615 3616 if (edp_bpc < display_bpc) { 3617 DRM_DEBUG_KMS("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc); 3618 display_bpc = edp_bpc; 3619 } 3620 continue; 3621 } 3622 3623 /* Not one of the known troublemakers, check the EDID */ 3624 list_for_each_entry(connector, &dev->mode_config.connector_list, 3625 head) { 3626 if (connector->encoder != encoder) 3627 continue; 3628 3629 /* Don't use an invalid EDID bpc value */ 3630 if (connector->display_info.bpc && 3631 connector->display_info.bpc < display_bpc) { 3632 DRM_DEBUG_KMS("clamping display bpc (was %d) to EDID reported max of %d\n", display_bpc, connector->display_info.bpc); 3633 display_bpc = connector->display_info.bpc; 3634 } 3635 } 3636 3637 /* 3638 * HDMI is either 12 or 8, so if the display lets 10bpc sneak 3639 * through, clamp it down. (Note: >12bpc will be caught below.) 3640 */ 3641 if (intel_encoder->type == INTEL_OUTPUT_HDMI) { 3642 if (display_bpc > 8 && display_bpc < 12) { 3643 DRM_DEBUG_KMS("forcing bpc to 12 for HDMI\n"); 3644 display_bpc = 12; 3645 } else { 3646 DRM_DEBUG_KMS("forcing bpc to 8 for HDMI\n"); 3647 display_bpc = 8; 3648 } 3649 } 3650 } 3651 3652 if (mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) { 3653 DRM_DEBUG_KMS("Dithering DP to 6bpc\n"); 3654 display_bpc = 6; 3655 } 3656 3657 /* 3658 * We could just drive the pipe at the highest bpc all the time and 3659 * enable dithering as needed, but that costs bandwidth. So choose 3660 * the minimum value that expresses the full color range of the fb but 3661 * also stays within the max display bpc discovered above. 3662 */ 3663 3664 switch (crtc->fb->depth) { 3665 case 8: 3666 bpc = 8; /* since we go through a colormap */ 3667 break; 3668 case 15: 3669 case 16: 3670 bpc = 6; /* min is 18bpp */ 3671 break; 3672 case 24: 3673 bpc = 8; 3674 break; 3675 case 30: 3676 bpc = 10; 3677 break; 3678 case 48: 3679 bpc = 12; 3680 break; 3681 default: 3682 DRM_DEBUG("unsupported depth, assuming 24 bits\n"); 3683 bpc = min((unsigned int)8, display_bpc); 3684 break; 3685 } 3686 3687 display_bpc = min(display_bpc, bpc); 3688 3689 DRM_DEBUG_KMS("setting pipe bpc to %d (max display bpc %d)\n", 3690 bpc, display_bpc); 3691 3692 *pipe_bpp = display_bpc * 3; 3693 3694 return display_bpc != bpc; 3695} 3696 3697static int i9xx_get_refclk(struct drm_crtc *crtc, int num_connectors) 3698{ 3699 struct drm_device *dev = crtc->dev; 3700 struct drm_i915_private *dev_priv = dev->dev_private; 3701 int refclk; 3702 3703 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) && 3704 intel_panel_use_ssc(dev_priv) && num_connectors < 2) { 3705 refclk = dev_priv->lvds_ssc_freq * 1000; 3706 DRM_DEBUG_KMS("using SSC reference clock of %d MHz\n", 3707 refclk / 1000); 3708 } else if (!IS_GEN2(dev)) { 3709 refclk = 96000; 3710 } else { 3711 refclk = 48000; 3712 } 3713 3714 return refclk; 3715} 3716 3717static void i9xx_adjust_sdvo_tv_clock(struct drm_display_mode *adjusted_mode, 3718 intel_clock_t *clock) 3719{ 3720 /* SDVO TV has fixed PLL values depend on its clock range, 3721 this mirrors vbios setting. */ 3722 if (adjusted_mode->clock >= 100000 3723 && adjusted_mode->clock < 140500) { 3724 clock->p1 = 2; 3725 clock->p2 = 10; 3726 clock->n = 3; 3727 clock->m1 = 16; 3728 clock->m2 = 8; 3729 } else if (adjusted_mode->clock >= 140500 3730 && adjusted_mode->clock <= 200000) { 3731 clock->p1 = 1; 3732 clock->p2 = 10; 3733 clock->n = 6; 3734 clock->m1 = 12; 3735 clock->m2 = 8; 3736 } 3737} 3738 3739static void i9xx_update_pll_dividers(struct drm_crtc *crtc, 3740 intel_clock_t *clock, 3741 intel_clock_t *reduced_clock) 3742{ 3743 struct drm_device *dev = crtc->dev; 3744 struct drm_i915_private *dev_priv = dev->dev_private; 3745 struct intel_crtc *intel_crtc = to_intel_crtc(crtc); 3746 int pipe = intel_crtc->pipe; 3747 u32 fp, fp2 = 0; 3748 3749 if (IS_PINEVIEW(dev)) { 3750 fp = (1 << clock->n) << 16 | clock->m1 << 8 | clock->m2; 3751 if (reduced_clock) 3752 fp2 = (1 << reduced_clock->n) << 16 | 3753 reduced_clock->m1 << 8 | reduced_clock->m2; 3754 } else { 3755 fp = clock->n << 16 | clock->m1 << 8 | clock->m2; 3756 if (reduced_clock) 3757 fp2 = reduced_clock->n << 16 | reduced_clock->m1 << 8 | 3758 reduced_clock->m2; 3759 } 3760 3761 I915_WRITE(FP0(pipe), fp); 3762 3763 intel_crtc->lowfreq_avail = false; 3764 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) && 3765 reduced_clock && i915_powersave) { 3766 I915_WRITE(FP1(pipe), fp2); 3767 intel_crtc->lowfreq_avail = true; 3768 } else { 3769 I915_WRITE(FP1(pipe), fp); 3770 } 3771} 3772 3773static void intel_update_lvds(struct drm_crtc *crtc, intel_clock_t *clock, 3774 struct drm_display_mode *adjusted_mode) 3775{ 3776 struct drm_device *dev = crtc->dev; 3777 struct drm_i915_private *dev_priv = dev->dev_private; 3778 struct intel_crtc *intel_crtc = to_intel_crtc(crtc); 3779 int pipe = intel_crtc->pipe; 3780 u32 temp; 3781 3782 temp = I915_READ(LVDS); 3783 temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP; 3784 if (pipe == 1) { 3785 temp |= LVDS_PIPEB_SELECT; 3786 } else { 3787 temp &= ~LVDS_PIPEB_SELECT; 3788 } 3789 /* set the corresponsding LVDS_BORDER bit */ 3790 temp |= dev_priv->lvds_border_bits; 3791 /* Set the B0-B3 data pairs corresponding to whether we're going to 3792 * set the DPLLs for dual-channel mode or not. 3793 */ 3794 if (clock->p2 == 7) 3795 temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP; 3796 else 3797 temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP); 3798 3799 /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP) 3800 * appropriately here, but we need to look more thoroughly into how 3801 * panels behave in the two modes. 3802 */ 3803 /* set the dithering flag on LVDS as needed */ 3804 if (INTEL_INFO(dev)->gen >= 4) { 3805 if (dev_priv->lvds_dither) 3806 temp |= LVDS_ENABLE_DITHER; 3807 else 3808 temp &= ~LVDS_ENABLE_DITHER; 3809 } 3810 temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY); 3811 if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC) 3812 temp |= LVDS_HSYNC_POLARITY; 3813 if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC) 3814 temp |= LVDS_VSYNC_POLARITY; 3815 I915_WRITE(LVDS, temp); 3816} 3817 3818static void i9xx_update_pll(struct drm_crtc *crtc, 3819 struct drm_display_mode *mode, 3820 struct drm_display_mode *adjusted_mode, 3821 intel_clock_t *clock, intel_clock_t *reduced_clock, 3822 int num_connectors) 3823{ 3824 struct drm_device *dev = crtc->dev; 3825 struct drm_i915_private *dev_priv = dev->dev_private; 3826 struct intel_crtc *intel_crtc = to_intel_crtc(crtc); 3827 int pipe = intel_crtc->pipe; 3828 u32 dpll; 3829 bool is_sdvo; 3830 3831 is_sdvo = intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO) || 3832 intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI); 3833 3834 dpll = DPLL_VGA_MODE_DIS; 3835 3836 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) 3837 dpll |= DPLLB_MODE_LVDS; 3838 else 3839 dpll |= DPLLB_MODE_DAC_SERIAL; 3840 if (is_sdvo) { 3841 int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode); 3842 if (pixel_multiplier > 1) { 3843 if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) 3844 dpll |= (pixel_multiplier - 1) << SDVO_MULTIPLIER_SHIFT_HIRES; 3845 } 3846 dpll |= DPLL_DVO_HIGH_SPEED; 3847 } 3848 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) 3849 dpll |= DPLL_DVO_HIGH_SPEED; 3850 3851 /* compute bitmask from p1 value */ 3852 if (IS_PINEVIEW(dev)) 3853 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW; 3854 else { 3855 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT; 3856 if (IS_G4X(dev) && reduced_clock) 3857 dpll |= (1 << (reduced_clock->p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT; 3858 } 3859 switch (clock->p2) { 3860 case 5: 3861 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5; 3862 break; 3863 case 7: 3864 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7; 3865 break; 3866 case 10: 3867 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10; 3868 break; 3869 case 14: 3870 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14; 3871 break; 3872 } 3873 if (INTEL_INFO(dev)->gen >= 4) 3874 dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT); 3875 3876 if (is_sdvo && intel_pipe_has_type(crtc, INTEL_OUTPUT_TVOUT)) 3877 dpll |= PLL_REF_INPUT_TVCLKINBC; 3878 else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_TVOUT)) 3879 /* XXX: just matching BIOS for now */ 3880 /* dpll |= PLL_REF_INPUT_TVCLKINBC; */ 3881 dpll |= 3; 3882 else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) && 3883 intel_panel_use_ssc(dev_priv) && num_connectors < 2) 3884 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN; 3885 else 3886 dpll |= PLL_REF_INPUT_DREFCLK; 3887 3888 dpll |= DPLL_VCO_ENABLE; 3889 I915_WRITE(DPLL(pipe), dpll & ~DPLL_VCO_ENABLE); 3890 POSTING_READ(DPLL(pipe)); 3891 DELAY(150); 3892 3893 /* The LVDS pin pair needs to be on before the DPLLs are enabled. 3894 * This is an exception to the general rule that mode_set doesn't turn 3895 * things on. 3896 */ 3897 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) 3898 intel_update_lvds(crtc, clock, adjusted_mode); 3899 3900 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) 3901 intel_dp_set_m_n(crtc, mode, adjusted_mode); 3902 3903 I915_WRITE(DPLL(pipe), dpll); 3904 3905 /* Wait for the clocks to stabilize. */ 3906 POSTING_READ(DPLL(pipe)); 3907 DELAY(150); 3908 3909 if (INTEL_INFO(dev)->gen >= 4) { 3910 u32 temp = 0; 3911 if (is_sdvo) { 3912 temp = intel_mode_get_pixel_multiplier(adjusted_mode); 3913 if (temp > 1) 3914 temp = (temp - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT; 3915 else 3916 temp = 0; 3917 } 3918 I915_WRITE(DPLL_MD(pipe), temp); 3919 } else { 3920 /* The pixel multiplier can only be updated once the 3921 * DPLL is enabled and the clocks are stable. 3922 * 3923 * So write it again. 3924 */ 3925 I915_WRITE(DPLL(pipe), dpll); 3926 } 3927} 3928 3929static void i8xx_update_pll(struct drm_crtc *crtc, 3930 struct drm_display_mode *adjusted_mode, 3931 intel_clock_t *clock, 3932 int num_connectors) 3933{ 3934 struct drm_device *dev = crtc->dev; 3935 struct drm_i915_private *dev_priv = dev->dev_private; 3936 struct intel_crtc *intel_crtc = to_intel_crtc(crtc); 3937 int pipe = intel_crtc->pipe; 3938 u32 dpll; 3939 3940 dpll = DPLL_VGA_MODE_DIS; 3941 3942 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { 3943 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT; 3944 } else { 3945 if (clock->p1 == 2) 3946 dpll |= PLL_P1_DIVIDE_BY_TWO; 3947 else 3948 dpll |= (clock->p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT; 3949 if (clock->p2 == 4) 3950 dpll |= PLL_P2_DIVIDE_BY_4; 3951 } 3952 3953 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_TVOUT)) 3954 /* XXX: just matching BIOS for now */ 3955 /* dpll |= PLL_REF_INPUT_TVCLKINBC; */ 3956 dpll |= 3; 3957 else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) && 3958 intel_panel_use_ssc(dev_priv) && num_connectors < 2) 3959 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN; 3960 else 3961 dpll |= PLL_REF_INPUT_DREFCLK; 3962 3963 dpll |= DPLL_VCO_ENABLE; 3964 I915_WRITE(DPLL(pipe), dpll & ~DPLL_VCO_ENABLE); 3965 POSTING_READ(DPLL(pipe)); 3966 DELAY(150); 3967 3968 I915_WRITE(DPLL(pipe), dpll); 3969 3970 /* Wait for the clocks to stabilize. */ 3971 POSTING_READ(DPLL(pipe)); 3972 DELAY(150); 3973 3974 /* The LVDS pin pair needs to be on before the DPLLs are enabled. 3975 * This is an exception to the general rule that mode_set doesn't turn 3976 * things on. 3977 */ 3978 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) 3979 intel_update_lvds(crtc, clock, adjusted_mode); 3980 3981 /* The pixel multiplier can only be updated once the 3982 * DPLL is enabled and the clocks are stable. 3983 * 3984 * So write it again. 3985 */ 3986 I915_WRITE(DPLL(pipe), dpll); 3987} 3988 3989static int i9xx_crtc_mode_set(struct drm_crtc *crtc, 3990 struct drm_display_mode *mode, 3991 struct drm_display_mode *adjusted_mode, 3992 int x, int y, 3993 struct drm_framebuffer *old_fb) 3994{ 3995 struct drm_device *dev = crtc->dev; 3996 struct drm_i915_private *dev_priv = dev->dev_private; 3997 struct intel_crtc *intel_crtc = to_intel_crtc(crtc); 3998 int pipe = intel_crtc->pipe; 3999 int plane = intel_crtc->plane; 4000 int refclk, num_connectors = 0; 4001 intel_clock_t clock, reduced_clock; 4002 u32 dspcntr, pipeconf, vsyncshift; 4003 bool ok, has_reduced_clock = false, is_sdvo = false; 4004 bool is_lvds = false, is_tv = false, is_dp = false; 4005 struct drm_mode_config *mode_config = &dev->mode_config; 4006 struct intel_encoder *encoder; 4007 const intel_limit_t *limit; 4008 int ret; 4009 4010 list_for_each_entry(encoder, &mode_config->encoder_list, base.head) { 4011 if (encoder->base.crtc != crtc) 4012 continue; 4013 4014 switch (encoder->type) { 4015 case INTEL_OUTPUT_LVDS: 4016 is_lvds = true; 4017 break; 4018 case INTEL_OUTPUT_SDVO: 4019 case INTEL_OUTPUT_HDMI: 4020 is_sdvo = true; 4021 if (encoder->needs_tv_clock) 4022 is_tv = true; 4023 break; 4024 case INTEL_OUTPUT_TVOUT: 4025 is_tv = true; 4026 break; 4027 case INTEL_OUTPUT_DISPLAYPORT: 4028 is_dp = true; 4029 break; 4030 } 4031 4032 num_connectors++; 4033 } 4034 4035 refclk = i9xx_get_refclk(crtc, num_connectors); 4036 4037 /* 4038 * Returns a set of divisors for the desired target clock with the given 4039 * refclk, or false. The returned values represent the clock equation: 4040 * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2. 4041 */ 4042 limit = intel_limit(crtc, refclk); 4043 ok = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk, NULL, 4044 &clock); 4045 if (!ok) { 4046 DRM_ERROR("Couldn't find PLL settings for mode!\n"); 4047 return -EINVAL; 4048 } 4049 4050 /* Ensure that the cursor is valid for the new mode before changing... */ 4051 intel_crtc_update_cursor(crtc, true); 4052 4053 if (is_lvds && dev_priv->lvds_downclock_avail) { 4054 /* 4055 * Ensure we match the reduced clock's P to the target clock. 4056 * If the clocks don't match, we can't switch the display clock 4057 * by using the FP0/FP1. In such case we will disable the LVDS 4058 * downclock feature. 4059 */ 4060 has_reduced_clock = limit->find_pll(limit, crtc, 4061 dev_priv->lvds_downclock, 4062 refclk, 4063 &clock, 4064 &reduced_clock); 4065 } 4066 4067 if (is_sdvo && is_tv) 4068 i9xx_adjust_sdvo_tv_clock(adjusted_mode, &clock); 4069 4070 i9xx_update_pll_dividers(crtc, &clock, has_reduced_clock ? 4071 &reduced_clock : NULL); 4072 4073 if (IS_GEN2(dev)) 4074 i8xx_update_pll(crtc, adjusted_mode, &clock, num_connectors); 4075 else 4076 i9xx_update_pll(crtc, mode, adjusted_mode, &clock, 4077 has_reduced_clock ? &reduced_clock : NULL, 4078 num_connectors); 4079 4080 /* setup pipeconf */ 4081 pipeconf = I915_READ(PIPECONF(pipe)); 4082 4083 /* Set up the display plane register */ 4084 dspcntr = DISPPLANE_GAMMA_ENABLE; 4085 4086 if (pipe == 0) 4087 dspcntr &= ~DISPPLANE_SEL_PIPE_MASK; 4088 else 4089 dspcntr |= DISPPLANE_SEL_PIPE_B; 4090 4091 if (pipe == 0 && INTEL_INFO(dev)->gen < 4) { 4092 /* Enable pixel doubling when the dot clock is > 90% of the (display) 4093 * core speed. 4094 * 4095 * XXX: No double-wide on 915GM pipe B. Is that the only reason for the 4096 * pipe == 0 check? 4097 */ 4098 if (mode->clock > 4099 dev_priv->display.get_display_clock_speed(dev) * 9 / 10) 4100 pipeconf |= PIPECONF_DOUBLE_WIDE; 4101 else 4102 pipeconf &= ~PIPECONF_DOUBLE_WIDE; 4103 } 4104 4105 /* default to 8bpc */ 4106 pipeconf &= ~(PIPECONF_BPP_MASK | PIPECONF_DITHER_EN); 4107 if (is_dp) { 4108 if (mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) { 4109 pipeconf |= PIPECONF_BPP_6 | 4110 PIPECONF_DITHER_EN | 4111 PIPECONF_DITHER_TYPE_SP; 4112 } 4113 } 4114 4115 DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B'); 4116 drm_mode_debug_printmodeline(mode); 4117 4118 if (HAS_PIPE_CXSR(dev)) { 4119 if (intel_crtc->lowfreq_avail) { 4120 DRM_DEBUG_KMS("enabling CxSR downclocking\n"); 4121 pipeconf |= PIPECONF_CXSR_DOWNCLOCK; 4122 } else { 4123 DRM_DEBUG_KMS("disabling CxSR downclocking\n"); 4124 pipeconf &= ~PIPECONF_CXSR_DOWNCLOCK; 4125 } 4126 } 4127 4128 pipeconf &= ~PIPECONF_INTERLACE_MASK; 4129 if (!IS_GEN2(dev) && 4130 adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) { 4131 pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION; 4132 /* the chip adds 2 halflines automatically */ 4133 adjusted_mode->crtc_vtotal -= 1; 4134 adjusted_mode->crtc_vblank_end -= 1; 4135 vsyncshift = adjusted_mode->crtc_hsync_start 4136 - adjusted_mode->crtc_htotal/2; 4137 } else { 4138 pipeconf |= PIPECONF_PROGRESSIVE; 4139 vsyncshift = 0; 4140 } 4141 4142 if (!IS_GEN3(dev)) 4143 I915_WRITE(VSYNCSHIFT(pipe), vsyncshift); 4144 4145 I915_WRITE(HTOTAL(pipe), 4146 (adjusted_mode->crtc_hdisplay - 1) | 4147 ((adjusted_mode->crtc_htotal - 1) << 16)); 4148 I915_WRITE(HBLANK(pipe), 4149 (adjusted_mode->crtc_hblank_start - 1) | 4150 ((adjusted_mode->crtc_hblank_end - 1) << 16)); 4151 I915_WRITE(HSYNC(pipe), 4152 (adjusted_mode->crtc_hsync_start - 1) | 4153 ((adjusted_mode->crtc_hsync_end - 1) << 16)); 4154 4155 I915_WRITE(VTOTAL(pipe), 4156 (adjusted_mode->crtc_vdisplay - 1) | 4157 ((adjusted_mode->crtc_vtotal - 1) << 16)); 4158 I915_WRITE(VBLANK(pipe), 4159 (adjusted_mode->crtc_vblank_start - 1) | 4160 ((adjusted_mode->crtc_vblank_end - 1) << 16)); 4161 I915_WRITE(VSYNC(pipe), 4162 (adjusted_mode->crtc_vsync_start - 1) | 4163 ((adjusted_mode->crtc_vsync_end - 1) << 16)); 4164 4165 /* pipesrc and dspsize control the size that is scaled from, 4166 * which should always be the user's requested size. 4167 */ 4168 I915_WRITE(DSPSIZE(plane), 4169 ((mode->vdisplay - 1) << 16) | 4170 (mode->hdisplay - 1)); 4171 I915_WRITE(DSPPOS(plane), 0); 4172 I915_WRITE(PIPESRC(pipe), 4173 ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1)); 4174 4175 I915_WRITE(PIPECONF(pipe), pipeconf); 4176 POSTING_READ(PIPECONF(pipe)); 4177 intel_enable_pipe(dev_priv, pipe, false); 4178 4179 intel_wait_for_vblank(dev, pipe); 4180 4181 I915_WRITE(DSPCNTR(plane), dspcntr); 4182 POSTING_READ(DSPCNTR(plane)); 4183 4184 ret = intel_pipe_set_base(crtc, x, y, old_fb); 4185 4186 intel_update_watermarks(dev); 4187 4188 return ret; 4189} 4190 4191/* 4192 * Initialize reference clocks when the driver loads 4193 */ 4194void ironlake_init_pch_refclk(struct drm_device *dev) 4195{ 4196 struct drm_i915_private *dev_priv = dev->dev_private; 4197 struct drm_mode_config *mode_config = &dev->mode_config; 4198 struct intel_encoder *encoder; 4199 u32 temp; 4200 bool has_lvds = false; 4201 bool has_cpu_edp = false; 4202 bool has_pch_edp = false; 4203 bool has_panel = false; 4204 bool has_ck505 = false; 4205 bool can_ssc = false; 4206 4207 /* We need to take the global config into account */ 4208 list_for_each_entry(encoder, &mode_config->encoder_list, 4209 base.head) { 4210 switch (encoder->type) { 4211 case INTEL_OUTPUT_LVDS: 4212 has_panel = true; 4213 has_lvds = true; 4214 break; 4215 case INTEL_OUTPUT_EDP: 4216 has_panel = true; 4217 if (intel_encoder_is_pch_edp(&encoder->base)) 4218 has_pch_edp = true; 4219 else 4220 has_cpu_edp = true; 4221 break; 4222 } 4223 } 4224 4225 if (HAS_PCH_IBX(dev)) { 4226 has_ck505 = dev_priv->display_clock_mode; 4227 can_ssc = has_ck505; 4228 } else { 4229 has_ck505 = false; 4230 can_ssc = true; 4231 } 4232 4233 DRM_DEBUG_KMS("has_panel %d has_lvds %d has_pch_edp %d has_cpu_edp %d has_ck505 %d\n", 4234 has_panel, has_lvds, has_pch_edp, has_cpu_edp, 4235 has_ck505); 4236 4237 /* Ironlake: try to setup display ref clock before DPLL 4238 * enabling. This is only under driver's control after 4239 * PCH B stepping, previous chipset stepping should be 4240 * ignoring this setting. 4241 */ 4242 temp = I915_READ(PCH_DREF_CONTROL); 4243 /* Always enable nonspread source */ 4244 temp &= ~DREF_NONSPREAD_SOURCE_MASK; 4245 4246 if (has_ck505) 4247 temp |= DREF_NONSPREAD_CK505_ENABLE; 4248 else 4249 temp |= DREF_NONSPREAD_SOURCE_ENABLE; 4250 4251 if (has_panel) { 4252 temp &= ~DREF_SSC_SOURCE_MASK; 4253 temp |= DREF_SSC_SOURCE_ENABLE; 4254 4255 /* SSC must be turned on before enabling the CPU output */ 4256 if (intel_panel_use_ssc(dev_priv) && can_ssc) { 4257 DRM_DEBUG_KMS("Using SSC on panel\n"); 4258 temp |= DREF_SSC1_ENABLE; 4259 } else 4260 temp &= ~DREF_SSC1_ENABLE; 4261 4262 /* Get SSC going before enabling the outputs */ 4263 I915_WRITE(PCH_DREF_CONTROL, temp); 4264 POSTING_READ(PCH_DREF_CONTROL); 4265 DELAY(200); 4266 4267 temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK; 4268 4269 /* Enable CPU source on CPU attached eDP */ 4270 if (has_cpu_edp) { 4271 if (intel_panel_use_ssc(dev_priv) && can_ssc) { 4272 DRM_DEBUG_KMS("Using SSC on eDP\n"); 4273 temp |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD; 4274 } 4275 else 4276 temp |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD; 4277 } else 4278 temp |= DREF_CPU_SOURCE_OUTPUT_DISABLE; 4279 4280 I915_WRITE(PCH_DREF_CONTROL, temp); 4281 POSTING_READ(PCH_DREF_CONTROL); 4282 DELAY(200); 4283 } else { 4284 DRM_DEBUG_KMS("Disabling SSC entirely\n"); 4285 4286 temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK; 4287 4288 /* Turn off CPU output */ 4289 temp |= DREF_CPU_SOURCE_OUTPUT_DISABLE; 4290 4291 I915_WRITE(PCH_DREF_CONTROL, temp); 4292 POSTING_READ(PCH_DREF_CONTROL); 4293 DELAY(200); 4294 4295 /* Turn off the SSC source */ 4296 temp &= ~DREF_SSC_SOURCE_MASK; 4297 temp |= DREF_SSC_SOURCE_DISABLE; 4298 4299 /* Turn off SSC1 */ 4300 temp &= ~ DREF_SSC1_ENABLE; 4301 4302 I915_WRITE(PCH_DREF_CONTROL, temp); 4303 POSTING_READ(PCH_DREF_CONTROL); 4304 DELAY(200); 4305 } 4306} 4307 4308static int ironlake_get_refclk(struct drm_crtc *crtc) 4309{ 4310 struct drm_device *dev = crtc->dev; 4311 struct drm_i915_private *dev_priv = dev->dev_private; 4312 struct intel_encoder *encoder; 4313 struct drm_mode_config *mode_config = &dev->mode_config; 4314 struct intel_encoder *edp_encoder = NULL; 4315 int num_connectors = 0; 4316 bool is_lvds = false; 4317 4318 list_for_each_entry(encoder, &mode_config->encoder_list, base.head) { 4319 if (encoder->base.crtc != crtc) 4320 continue; 4321 4322 switch (encoder->type) { 4323 case INTEL_OUTPUT_LVDS: 4324 is_lvds = true; 4325 break; 4326 case INTEL_OUTPUT_EDP: 4327 edp_encoder = encoder; 4328 break; 4329 } 4330 num_connectors++; 4331 } 4332 4333 if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2) { 4334 DRM_DEBUG_KMS("using SSC reference clock of %d MHz\n", 4335 dev_priv->lvds_ssc_freq); 4336 return dev_priv->lvds_ssc_freq * 1000; 4337 } 4338 4339 return 120000; 4340} 4341 4342static int ironlake_crtc_mode_set(struct drm_crtc *crtc, 4343 struct drm_display_mode *mode, 4344 struct drm_display_mode *adjusted_mode, 4345 int x, int y, 4346 struct drm_framebuffer *old_fb) 4347{ 4348 struct drm_device *dev = crtc->dev; 4349 struct drm_i915_private *dev_priv = dev->dev_private; 4350 struct intel_crtc *intel_crtc = to_intel_crtc(crtc); 4351 int pipe = intel_crtc->pipe; 4352 int plane = intel_crtc->plane; 4353 int refclk, num_connectors = 0; 4354 intel_clock_t clock, reduced_clock; 4355 u32 dpll, fp = 0, fp2 = 0, dspcntr, pipeconf; 4356 bool ok, has_reduced_clock = false, is_sdvo = false; 4357 bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false; 4358 struct drm_mode_config *mode_config = &dev->mode_config; 4359 struct intel_encoder *encoder, *edp_encoder = NULL; 4360 const intel_limit_t *limit; 4361 int ret; 4362 struct fdi_m_n m_n = {0}; 4363 u32 temp; 4364 int target_clock, pixel_multiplier, lane, link_bw, factor; 4365 unsigned int pipe_bpp; 4366 bool dither; 4367 bool is_cpu_edp = false, is_pch_edp = false; 4368 4369 list_for_each_entry(encoder, &mode_config->encoder_list, base.head) { 4370 if (encoder->base.crtc != crtc) 4371 continue; 4372 4373 switch (encoder->type) { 4374 case INTEL_OUTPUT_LVDS: 4375 is_lvds = true; 4376 break; 4377 case INTEL_OUTPUT_SDVO: 4378 case INTEL_OUTPUT_HDMI: 4379 is_sdvo = true; 4380 if (encoder->needs_tv_clock) 4381 is_tv = true; 4382 break; 4383 case INTEL_OUTPUT_TVOUT: 4384 is_tv = true; 4385 break; 4386 case INTEL_OUTPUT_ANALOG: 4387 is_crt = true; 4388 break; 4389 case INTEL_OUTPUT_DISPLAYPORT: 4390 is_dp = true; 4391 break; 4392 case INTEL_OUTPUT_EDP: 4393 is_dp = true; 4394 if (intel_encoder_is_pch_edp(&encoder->base)) 4395 is_pch_edp = true; 4396 else 4397 is_cpu_edp = true; 4398 edp_encoder = encoder; 4399 break; 4400 } 4401 4402 num_connectors++; 4403 } 4404 4405 refclk = ironlake_get_refclk(crtc); 4406 4407 /* 4408 * Returns a set of divisors for the desired target clock with the given 4409 * refclk, or false. The returned values represent the clock equation: 4410 * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2. 4411 */ 4412 limit = intel_limit(crtc, refclk); 4413 ok = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk, NULL, 4414 &clock); 4415 if (!ok) { 4416 DRM_ERROR("Couldn't find PLL settings for mode!\n"); 4417 return -EINVAL; 4418 } 4419 4420 /* Ensure that the cursor is valid for the new mode before changing... */ 4421 intel_crtc_update_cursor(crtc, true); 4422 4423 if (is_lvds && dev_priv->lvds_downclock_avail) { 4424 /* 4425 * Ensure we match the reduced clock's P to the target clock. 4426 * If the clocks don't match, we can't switch the display clock 4427 * by using the FP0/FP1. In such case we will disable the LVDS 4428 * downclock feature. 4429 */ 4430 has_reduced_clock = limit->find_pll(limit, crtc, 4431 dev_priv->lvds_downclock, 4432 refclk, 4433 &clock, 4434 &reduced_clock); 4435 } 4436 /* SDVO TV has fixed PLL values depend on its clock range, 4437 this mirrors vbios setting. */ 4438 if (is_sdvo && is_tv) { 4439 if (adjusted_mode->clock >= 100000 4440 && adjusted_mode->clock < 140500) { 4441 clock.p1 = 2; 4442 clock.p2 = 10; 4443 clock.n = 3; 4444 clock.m1 = 16; 4445 clock.m2 = 8; 4446 } else if (adjusted_mode->clock >= 140500 4447 && adjusted_mode->clock <= 200000) { 4448 clock.p1 = 1; 4449 clock.p2 = 10; 4450 clock.n = 6; 4451 clock.m1 = 12; 4452 clock.m2 = 8; 4453 } 4454 } 4455 4456 /* FDI link */ 4457 pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode); 4458 lane = 0; 4459 /* CPU eDP doesn't require FDI link, so just set DP M/N 4460 according to current link config */ 4461 if (is_cpu_edp) { 4462 target_clock = mode->clock; 4463 intel_edp_link_config(edp_encoder, &lane, &link_bw); 4464 } else { 4465 /* [e]DP over FDI requires target mode clock 4466 instead of link clock */ 4467 if (is_dp) 4468 target_clock = mode->clock; 4469 else 4470 target_clock = adjusted_mode->clock; 4471 4472 /* FDI is a binary signal running at ~2.7GHz, encoding 4473 * each output octet as 10 bits. The actual frequency 4474 * is stored as a divider into a 100MHz clock, and the 4475 * mode pixel clock is stored in units of 1KHz. 4476 * Hence the bw of each lane in terms of the mode signal 4477 * is: 4478 */ 4479 link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10; 4480 } 4481 4482 /* determine panel color depth */ 4483 temp = I915_READ(PIPECONF(pipe)); 4484 temp &= ~PIPE_BPC_MASK; 4485 dither = intel_choose_pipe_bpp_dither(crtc, &pipe_bpp, mode); 4486 switch (pipe_bpp) { 4487 case 18: 4488 temp |= PIPE_6BPC; 4489 break; 4490 case 24: 4491 temp |= PIPE_8BPC; 4492 break; 4493 case 30: 4494 temp |= PIPE_10BPC; 4495 break; 4496 case 36: 4497 temp |= PIPE_12BPC; 4498 break; 4499 default: 4500 printf("intel_choose_pipe_bpp returned invalid value %d\n", 4501 pipe_bpp); 4502 temp |= PIPE_8BPC; 4503 pipe_bpp = 24; 4504 break; 4505 } 4506 4507 intel_crtc->bpp = pipe_bpp; 4508 I915_WRITE(PIPECONF(pipe), temp); 4509 4510 if (!lane) { 4511 /* 4512 * Account for spread spectrum to avoid 4513 * oversubscribing the link. Max center spread 4514 * is 2.5%; use 5% for safety's sake. 4515 */ 4516 u32 bps = target_clock * intel_crtc->bpp * 21 / 20; 4517 lane = bps / (link_bw * 8) + 1; 4518 } 4519 4520 intel_crtc->fdi_lanes = lane; 4521 4522 if (pixel_multiplier > 1) 4523 link_bw *= pixel_multiplier; 4524 ironlake_compute_m_n(intel_crtc->bpp, lane, target_clock, link_bw, 4525 &m_n); 4526 4527 fp = clock.n << 16 | clock.m1 << 8 | clock.m2; 4528 if (has_reduced_clock) 4529 fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 | 4530 reduced_clock.m2; 4531 4532 /* Enable autotuning of the PLL clock (if permissible) */ 4533 factor = 21; 4534 if (is_lvds) { 4535 if ((intel_panel_use_ssc(dev_priv) && 4536 dev_priv->lvds_ssc_freq == 100) || 4537 (I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP) 4538 factor = 25; 4539 } else if (is_sdvo && is_tv) 4540 factor = 20; 4541 4542 if (clock.m < factor * clock.n) 4543 fp |= FP_CB_TUNE; 4544 4545 dpll = 0; 4546 4547 if (is_lvds) 4548 dpll |= DPLLB_MODE_LVDS; 4549 else 4550 dpll |= DPLLB_MODE_DAC_SERIAL; 4551 if (is_sdvo) { 4552 int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode); 4553 if (pixel_multiplier > 1) { 4554 dpll |= (pixel_multiplier - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT; 4555 } 4556 dpll |= DPLL_DVO_HIGH_SPEED; 4557 } 4558 if (is_dp && !is_cpu_edp) 4559 dpll |= DPLL_DVO_HIGH_SPEED; 4560 4561 /* compute bitmask from p1 value */ 4562 dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT; 4563 /* also FPA1 */ 4564 dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT; 4565 4566 switch (clock.p2) { 4567 case 5: 4568 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5; 4569 break; 4570 case 7: 4571 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7; 4572 break; 4573 case 10: 4574 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10; 4575 break; 4576 case 14: 4577 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14; 4578 break; 4579 } 4580 4581 if (is_sdvo && is_tv) 4582 dpll |= PLL_REF_INPUT_TVCLKINBC; 4583 else if (is_tv) 4584 /* XXX: just matching BIOS for now */ 4585 /* dpll |= PLL_REF_INPUT_TVCLKINBC; */ 4586 dpll |= 3; 4587 else if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2) 4588 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN; 4589 else 4590 dpll |= PLL_REF_INPUT_DREFCLK; 4591 4592 /* setup pipeconf */ 4593 pipeconf = I915_READ(PIPECONF(pipe)); 4594 4595 /* Set up the display plane register */ 4596 dspcntr = DISPPLANE_GAMMA_ENABLE; 4597 DRM_DEBUG_KMS("Mode for pipe %d:\n", pipe); 4598 drm_mode_debug_printmodeline(mode); 4599 4600 /* CPU eDP is the only output that doesn't need a PCH PLL of its own on 4601 * pre-Haswell/LPT generation */ 4602 if (HAS_PCH_LPT(dev)) { 4603 DRM_DEBUG_KMS("LPT detected: no PLL for pipe %d necessary\n", 4604 pipe); 4605 } else if (!is_cpu_edp) { 4606 struct intel_pch_pll *pll; 4607 4608 pll = intel_get_pch_pll(intel_crtc, dpll, fp); 4609 if (pll == NULL) { 4610 DRM_DEBUG_DRIVER("failed to find PLL for pipe %d\n", 4611 pipe); 4612 return -EINVAL; 4613 } 4614 } else 4615 intel_put_pch_pll(intel_crtc); 4616 4617 /* The LVDS pin pair needs to be on before the DPLLs are enabled. 4618 * This is an exception to the general rule that mode_set doesn't turn 4619 * things on. 4620 */ 4621 if (is_lvds) { 4622 temp = I915_READ(PCH_LVDS); 4623 temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP; 4624 if (HAS_PCH_CPT(dev)) { 4625 temp &= ~PORT_TRANS_SEL_MASK; 4626 temp |= PORT_TRANS_SEL_CPT(pipe); 4627 } else { 4628 if (pipe == 1) 4629 temp |= LVDS_PIPEB_SELECT; 4630 else 4631 temp &= ~LVDS_PIPEB_SELECT; 4632 } 4633 4634 /* set the corresponsding LVDS_BORDER bit */ 4635 temp |= dev_priv->lvds_border_bits; 4636 /* Set the B0-B3 data pairs corresponding to whether we're going to 4637 * set the DPLLs for dual-channel mode or not. 4638 */ 4639 if (clock.p2 == 7) 4640 temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP; 4641 else 4642 temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP); 4643 4644 /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP) 4645 * appropriately here, but we need to look more thoroughly into how 4646 * panels behave in the two modes. 4647 */ 4648 temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY); 4649 if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC) 4650 temp |= LVDS_HSYNC_POLARITY; 4651 if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC) 4652 temp |= LVDS_VSYNC_POLARITY; 4653 I915_WRITE(PCH_LVDS, temp); 4654 } 4655 4656 pipeconf &= ~PIPECONF_DITHER_EN; 4657 pipeconf &= ~PIPECONF_DITHER_TYPE_MASK; 4658 if ((is_lvds && dev_priv->lvds_dither) || dither) { 4659 pipeconf |= PIPECONF_DITHER_EN; 4660 pipeconf |= PIPECONF_DITHER_TYPE_SP; 4661 } 4662 if (is_dp && !is_cpu_edp) { 4663 intel_dp_set_m_n(crtc, mode, adjusted_mode); 4664 } else { 4665 /* For non-DP output, clear any trans DP clock recovery setting.*/ 4666 I915_WRITE(TRANSDATA_M1(pipe), 0); 4667 I915_WRITE(TRANSDATA_N1(pipe), 0); 4668 I915_WRITE(TRANSDPLINK_M1(pipe), 0); 4669 I915_WRITE(TRANSDPLINK_N1(pipe), 0); 4670 } 4671 4672 if (intel_crtc->pch_pll) { 4673 I915_WRITE(intel_crtc->pch_pll->pll_reg, dpll); 4674 4675 /* Wait for the clocks to stabilize. */ 4676 POSTING_READ(intel_crtc->pch_pll->pll_reg); 4677 DELAY(150); 4678 4679 /* The pixel multiplier can only be updated once the 4680 * DPLL is enabled and the clocks are stable. 4681 * 4682 * So write it again. 4683 */ 4684 I915_WRITE(intel_crtc->pch_pll->pll_reg, dpll); 4685 } 4686 4687 intel_crtc->lowfreq_avail = false; 4688 if (intel_crtc->pch_pll) { 4689 if (is_lvds && has_reduced_clock && i915_powersave) { 4690 I915_WRITE(intel_crtc->pch_pll->fp1_reg, fp2); 4691 intel_crtc->lowfreq_avail = true; 4692 if (HAS_PIPE_CXSR(dev)) { 4693 DRM_DEBUG_KMS("enabling CxSR downclocking\n"); 4694 pipeconf |= PIPECONF_CXSR_DOWNCLOCK; 4695 } 4696 } else { 4697 I915_WRITE(intel_crtc->pch_pll->fp1_reg, fp); 4698 if (HAS_PIPE_CXSR(dev)) { 4699 DRM_DEBUG_KMS("disabling CxSR downclocking\n"); 4700 pipeconf &= ~PIPECONF_CXSR_DOWNCLOCK; 4701 } 4702 } 4703 } 4704 4705 pipeconf &= ~PIPECONF_INTERLACE_MASK; 4706 if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) { 4707 pipeconf |= PIPECONF_INTERLACED_ILK; 4708 /* the chip adds 2 halflines automatically */ 4709 adjusted_mode->crtc_vtotal -= 1; 4710 adjusted_mode->crtc_vblank_end -= 1; 4711 I915_WRITE(VSYNCSHIFT(pipe), 4712 adjusted_mode->crtc_hsync_start 4713 - adjusted_mode->crtc_htotal/2); 4714 } else { 4715 pipeconf |= PIPECONF_PROGRESSIVE; 4716 I915_WRITE(VSYNCSHIFT(pipe), 0); 4717 } 4718 4719 I915_WRITE(HTOTAL(pipe), 4720 (adjusted_mode->crtc_hdisplay - 1) | 4721 ((adjusted_mode->crtc_htotal - 1) << 16)); 4722 I915_WRITE(HBLANK(pipe), 4723 (adjusted_mode->crtc_hblank_start - 1) | 4724 ((adjusted_mode->crtc_hblank_end - 1) << 16)); 4725 I915_WRITE(HSYNC(pipe), 4726 (adjusted_mode->crtc_hsync_start - 1) | 4727 ((adjusted_mode->crtc_hsync_end - 1) << 16)); 4728 4729 I915_WRITE(VTOTAL(pipe), 4730 (adjusted_mode->crtc_vdisplay - 1) | 4731 ((adjusted_mode->crtc_vtotal - 1) << 16)); 4732 I915_WRITE(VBLANK(pipe), 4733 (adjusted_mode->crtc_vblank_start - 1) | 4734 ((adjusted_mode->crtc_vblank_end - 1) << 16)); 4735 I915_WRITE(VSYNC(pipe), 4736 (adjusted_mode->crtc_vsync_start - 1) | 4737 ((adjusted_mode->crtc_vsync_end - 1) << 16)); 4738 4739 /* pipesrc controls the size that is scaled from, which should 4740 * always be the user's requested size. 4741 */ 4742 I915_WRITE(PIPESRC(pipe), 4743 ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1)); 4744 4745 I915_WRITE(PIPE_DATA_M1(pipe), TU_SIZE(m_n.tu) | m_n.gmch_m); 4746 I915_WRITE(PIPE_DATA_N1(pipe), m_n.gmch_n); 4747 I915_WRITE(PIPE_LINK_M1(pipe), m_n.link_m); 4748 I915_WRITE(PIPE_LINK_N1(pipe), m_n.link_n); 4749 4750 if (is_cpu_edp) 4751 ironlake_set_pll_edp(crtc, adjusted_mode->clock); 4752 4753 I915_WRITE(PIPECONF(pipe), pipeconf); 4754 POSTING_READ(PIPECONF(pipe)); 4755 4756 intel_wait_for_vblank(dev, pipe); 4757 4758 I915_WRITE(DSPCNTR(plane), dspcntr); 4759 POSTING_READ(DSPCNTR(plane)); 4760 4761 ret = intel_pipe_set_base(crtc, x, y, old_fb); 4762 4763 intel_update_watermarks(dev); 4764 4765 intel_update_linetime_watermarks(dev, pipe, adjusted_mode); 4766 4767 return ret; 4768} 4769 4770static int intel_crtc_mode_set(struct drm_crtc *crtc, 4771 struct drm_display_mode *mode, 4772 struct drm_display_mode *adjusted_mode, 4773 int x, int y, 4774 struct drm_framebuffer *old_fb) 4775{ 4776 struct drm_device *dev = crtc->dev; 4777 struct drm_i915_private *dev_priv = dev->dev_private; 4778 struct intel_crtc *intel_crtc = to_intel_crtc(crtc); 4779 int pipe = intel_crtc->pipe; 4780 int ret; 4781 4782 drm_vblank_pre_modeset(dev, pipe); 4783 4784 ret = dev_priv->display.crtc_mode_set(crtc, mode, adjusted_mode, 4785 x, y, old_fb); 4786 drm_vblank_post_modeset(dev, pipe); 4787 4788 if (ret) 4789 intel_crtc->dpms_mode = DRM_MODE_DPMS_OFF; 4790 else 4791 intel_crtc->dpms_mode = DRM_MODE_DPMS_ON; 4792 4793 return ret; 4794} 4795 4796static bool intel_eld_uptodate(struct drm_connector *connector, 4797 int reg_eldv, uint32_t bits_eldv, 4798 int reg_elda, uint32_t bits_elda, 4799 int reg_edid) 4800{ 4801 struct drm_i915_private *dev_priv = connector->dev->dev_private; 4802 uint8_t *eld = connector->eld; 4803 uint32_t i; 4804 4805 i = I915_READ(reg_eldv); 4806 i &= bits_eldv; 4807 4808 if (!eld[0]) 4809 return !i; 4810 4811 if (!i) 4812 return false; 4813 4814 i = I915_READ(reg_elda); 4815 i &= ~bits_elda; 4816 I915_WRITE(reg_elda, i); 4817 4818 for (i = 0; i < eld[2]; i++) 4819 if (I915_READ(reg_edid) != *((uint32_t *)eld + i)) 4820 return false; 4821 4822 return true; 4823} 4824 4825static void g4x_write_eld(struct drm_connector *connector, 4826 struct drm_crtc *crtc) 4827{ 4828 struct drm_i915_private *dev_priv = connector->dev->dev_private; 4829 uint8_t *eld = connector->eld; 4830 uint32_t eldv; 4831 uint32_t len; 4832 uint32_t i; 4833 4834 i = I915_READ(G4X_AUD_VID_DID); 4835 4836 if (i == INTEL_AUDIO_DEVBLC || i == INTEL_AUDIO_DEVCL) 4837 eldv = G4X_ELDV_DEVCL_DEVBLC; 4838 else 4839 eldv = G4X_ELDV_DEVCTG; 4840 4841 if (intel_eld_uptodate(connector, 4842 G4X_AUD_CNTL_ST, eldv, 4843 G4X_AUD_CNTL_ST, G4X_ELD_ADDR, 4844 G4X_HDMIW_HDMIEDID)) 4845 return; 4846 4847 i = I915_READ(G4X_AUD_CNTL_ST); 4848 i &= ~(eldv | G4X_ELD_ADDR); 4849 len = (i >> 9) & 0x1f; /* ELD buffer size */ 4850 I915_WRITE(G4X_AUD_CNTL_ST, i); 4851 4852 if (!eld[0]) 4853 return; 4854 4855 if (eld[2] < (uint8_t)len) 4856 len = eld[2]; 4857 DRM_DEBUG_KMS("ELD size %d\n", len); 4858 for (i = 0; i < len; i++) 4859 I915_WRITE(G4X_HDMIW_HDMIEDID, *((uint32_t *)eld + i)); 4860 4861 i = I915_READ(G4X_AUD_CNTL_ST); 4862 i |= eldv; 4863 I915_WRITE(G4X_AUD_CNTL_ST, i); 4864} 4865 4866static void ironlake_write_eld(struct drm_connector *connector, 4867 struct drm_crtc *crtc) 4868{ 4869 struct drm_i915_private *dev_priv = connector->dev->dev_private; 4870 uint8_t *eld = connector->eld; 4871 uint32_t eldv; 4872 uint32_t i; 4873 int len; 4874 int hdmiw_hdmiedid; 4875 int aud_config; 4876 int aud_cntl_st; 4877 int aud_cntrl_st2; 4878 4879 if (HAS_PCH_IBX(connector->dev)) { 4880 hdmiw_hdmiedid = IBX_HDMIW_HDMIEDID_A; 4881 aud_config = IBX_AUD_CONFIG_A; 4882 aud_cntl_st = IBX_AUD_CNTL_ST_A; 4883 aud_cntrl_st2 = IBX_AUD_CNTL_ST2; 4884 } else { 4885 hdmiw_hdmiedid = CPT_HDMIW_HDMIEDID_A; 4886 aud_config = CPT_AUD_CONFIG_A; 4887 aud_cntl_st = CPT_AUD_CNTL_ST_A; 4888 aud_cntrl_st2 = CPT_AUD_CNTRL_ST2; 4889 } 4890 4891 i = to_intel_crtc(crtc)->pipe; 4892 hdmiw_hdmiedid += i * 0x100; 4893 aud_cntl_st += i * 0x100; 4894 aud_config += i * 0x100; 4895 4896 DRM_DEBUG_KMS("ELD on pipe %c\n", pipe_name(i)); 4897 4898 i = I915_READ(aud_cntl_st); 4899 i = (i >> 29) & 0x3; /* DIP_Port_Select, 0x1 = PortB */ 4900 if (!i) { 4901 DRM_DEBUG_KMS("Audio directed to unknown port\n"); 4902 /* operate blindly on all ports */ 4903 eldv = IBX_ELD_VALIDB; 4904 eldv |= IBX_ELD_VALIDB << 4; 4905 eldv |= IBX_ELD_VALIDB << 8; 4906 } else { 4907 DRM_DEBUG_KMS("ELD on port %c\n", 'A' + i); 4908 eldv = IBX_ELD_VALIDB << ((i - 1) * 4); 4909 } 4910 4911 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) { 4912 DRM_DEBUG_DRIVER("ELD: DisplayPort detected\n"); 4913 eld[5] |= (1 << 2); /* Conn_Type, 0x1 = DisplayPort */ 4914 I915_WRITE(aud_config, AUD_CONFIG_N_VALUE_INDEX); /* 0x1 = DP */ 4915 } else 4916 I915_WRITE(aud_config, 0); 4917 4918 if (intel_eld_uptodate(connector, 4919 aud_cntrl_st2, eldv, 4920 aud_cntl_st, IBX_ELD_ADDRESS, 4921 hdmiw_hdmiedid)) 4922 return; 4923 4924 i = I915_READ(aud_cntrl_st2); 4925 i &= ~eldv; 4926 I915_WRITE(aud_cntrl_st2, i); 4927 4928 if (!eld[0]) 4929 return; 4930 4931 i = I915_READ(aud_cntl_st); 4932 i &= ~IBX_ELD_ADDRESS; 4933 I915_WRITE(aud_cntl_st, i); 4934 4935 /* 84 bytes of hw ELD buffer */ 4936 len = 21; 4937 if (eld[2] < (uint8_t)len) 4938 len = eld[2]; 4939 DRM_DEBUG_KMS("ELD size %d\n", len); 4940 for (i = 0; i < len; i++) 4941 I915_WRITE(hdmiw_hdmiedid, *((uint32_t *)eld + i)); 4942 4943 i = I915_READ(aud_cntrl_st2); 4944 i |= eldv; 4945 I915_WRITE(aud_cntrl_st2, i); 4946} 4947 4948void intel_write_eld(struct drm_encoder *encoder, 4949 struct drm_display_mode *mode) 4950{ 4951 struct drm_crtc *crtc = encoder->crtc; 4952 struct drm_connector *connector; 4953 struct drm_device *dev = encoder->dev; 4954 struct drm_i915_private *dev_priv = dev->dev_private; 4955 4956 connector = drm_select_eld(encoder, mode); 4957 if (!connector) 4958 return; 4959 4960 DRM_DEBUG_KMS("ELD on [CONNECTOR:%d:%s], [ENCODER:%d:%s]\n", 4961 connector->base.id, 4962 drm_get_connector_name(connector), 4963 connector->encoder->base.id, 4964 drm_get_encoder_name(connector->encoder)); 4965 4966 connector->eld[6] = drm_av_sync_delay(connector, mode) / 2; 4967 4968 if (dev_priv->display.write_eld) 4969 dev_priv->display.write_eld(connector, crtc); 4970} 4971 4972/** Loads the palette/gamma unit for the CRTC with the prepared values */ 4973void intel_crtc_load_lut(struct drm_crtc *crtc) 4974{ 4975 struct drm_device *dev = crtc->dev; 4976 struct drm_i915_private *dev_priv = dev->dev_private; 4977 struct intel_crtc *intel_crtc = to_intel_crtc(crtc); 4978 int palreg = PALETTE(intel_crtc->pipe); 4979 int i; 4980 4981 /* The clocks have to be on to load the palette. */ 4982 if (!crtc->enabled || !intel_crtc->active) 4983 return; 4984 4985 /* use legacy palette for Ironlake */ 4986 if (HAS_PCH_SPLIT(dev)) 4987 palreg = LGC_PALETTE(intel_crtc->pipe); 4988 4989 for (i = 0; i < 256; i++) { 4990 I915_WRITE(palreg + 4 * i, 4991 (intel_crtc->lut_r[i] << 16) | 4992 (intel_crtc->lut_g[i] << 8) | 4993 intel_crtc->lut_b[i]); 4994 } 4995} 4996 4997static void i845_update_cursor(struct drm_crtc *crtc, u32 base) 4998{ 4999 struct drm_device *dev = crtc->dev; 5000 struct drm_i915_private *dev_priv = dev->dev_private; 5001 struct intel_crtc *intel_crtc = to_intel_crtc(crtc); 5002 bool visible = base != 0; 5003 u32 cntl; 5004 5005 if (intel_crtc->cursor_visible == visible) 5006 return; 5007 5008 cntl = I915_READ(_CURACNTR); 5009 if (visible) { 5010 /* On these chipsets we can only modify the base whilst 5011 * the cursor is disabled. 5012 */ 5013 I915_WRITE(_CURABASE, base); 5014 5015 cntl &= ~(CURSOR_FORMAT_MASK); 5016 /* XXX width must be 64, stride 256 => 0x00 << 28 */ 5017 cntl |= CURSOR_ENABLE | 5018 CURSOR_GAMMA_ENABLE | 5019 CURSOR_FORMAT_ARGB; 5020 } else 5021 cntl &= ~(CURSOR_ENABLE | CURSOR_GAMMA_ENABLE); 5022 I915_WRITE(_CURACNTR, cntl); 5023 5024 intel_crtc->cursor_visible = visible; 5025} 5026 5027static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base) 5028{ 5029 struct drm_device *dev = crtc->dev; 5030 struct drm_i915_private *dev_priv = dev->dev_private; 5031 struct intel_crtc *intel_crtc = to_intel_crtc(crtc); 5032 int pipe = intel_crtc->pipe; 5033 bool visible = base != 0; 5034 5035 if (intel_crtc->cursor_visible != visible) { 5036 uint32_t cntl = I915_READ(CURCNTR(pipe)); 5037 if (base) { 5038 cntl &= ~(CURSOR_MODE | MCURSOR_PIPE_SELECT); 5039 cntl |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE; 5040 cntl |= pipe << 28; /* Connect to correct pipe */ 5041 } else { 5042 cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE); 5043 cntl |= CURSOR_MODE_DISABLE; 5044 } 5045 I915_WRITE(CURCNTR(pipe), cntl); 5046 5047 intel_crtc->cursor_visible = visible; 5048 } 5049 /* and commit changes on next vblank */ 5050 I915_WRITE(CURBASE(pipe), base); 5051} 5052 5053static void ivb_update_cursor(struct drm_crtc *crtc, u32 base) 5054{ 5055 struct drm_device *dev = crtc->dev; 5056 struct drm_i915_private *dev_priv = dev->dev_private; 5057 struct intel_crtc *intel_crtc = to_intel_crtc(crtc); 5058 int pipe = intel_crtc->pipe; 5059 bool visible = base != 0; 5060 5061 if (intel_crtc->cursor_visible != visible) { 5062 uint32_t cntl = I915_READ(CURCNTR_IVB(pipe)); 5063 if (base) { 5064 cntl &= ~CURSOR_MODE; 5065 cntl |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE; 5066 } else { 5067 cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE); 5068 cntl |= CURSOR_MODE_DISABLE; 5069 } 5070 I915_WRITE(CURCNTR_IVB(pipe), cntl); 5071 5072 intel_crtc->cursor_visible = visible; 5073 } 5074 /* and commit changes on next vblank */ 5075 I915_WRITE(CURBASE_IVB(pipe), base); 5076} 5077 5078/* If no-part of the cursor is visible on the framebuffer, then the GPU may hang... */ 5079static void intel_crtc_update_cursor(struct drm_crtc *crtc, 5080 bool on) 5081{ 5082 struct drm_device *dev = crtc->dev; 5083 struct drm_i915_private *dev_priv = dev->dev_private; 5084 struct intel_crtc *intel_crtc = to_intel_crtc(crtc); 5085 int pipe = intel_crtc->pipe; 5086 int x = intel_crtc->cursor_x; 5087 int y = intel_crtc->cursor_y; 5088 u32 base, pos; 5089 bool visible; 5090 5091 pos = 0; 5092 5093 if (on && crtc->enabled && crtc->fb) { 5094 base = intel_crtc->cursor_addr; 5095 if (x > (int) crtc->fb->width) 5096 base = 0; 5097 5098 if (y > (int) crtc->fb->height) 5099 base = 0; 5100 } else 5101 base = 0; 5102 5103 if (x < 0) { 5104 if (x + intel_crtc->cursor_width < 0) 5105 base = 0; 5106 5107 pos |= CURSOR_POS_SIGN << CURSOR_X_SHIFT; 5108 x = -x; 5109 } 5110 pos |= x << CURSOR_X_SHIFT; 5111 5112 if (y < 0) { 5113 if (y + intel_crtc->cursor_height < 0) 5114 base = 0; 5115 5116 pos |= CURSOR_POS_SIGN << CURSOR_Y_SHIFT; 5117 y = -y; 5118 } 5119 pos |= y << CURSOR_Y_SHIFT; 5120 5121 visible = base != 0; 5122 if (!visible && !intel_crtc->cursor_visible) 5123 return; 5124 5125 if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev)) { 5126 I915_WRITE(CURPOS_IVB(pipe), pos); 5127 ivb_update_cursor(crtc, base); 5128 } else { 5129 I915_WRITE(CURPOS(pipe), pos); 5130 if (IS_845G(dev) || IS_I865G(dev)) 5131 i845_update_cursor(crtc, base); 5132 else 5133 i9xx_update_cursor(crtc, base); 5134 } 5135} 5136 5137static int intel_crtc_cursor_set(struct drm_crtc *crtc, 5138 struct drm_file *file, 5139 uint32_t handle, 5140 uint32_t width, uint32_t height) 5141{ 5142 struct drm_device *dev = crtc->dev; 5143 struct drm_i915_private *dev_priv = dev->dev_private; 5144 struct intel_crtc *intel_crtc = to_intel_crtc(crtc); 5145 struct drm_i915_gem_object *obj; 5146 uint32_t addr; 5147 int ret; 5148 5149 DRM_DEBUG_KMS("\n"); 5150 5151 /* if we want to turn off the cursor ignore width and height */ 5152 if (!handle) { 5153 DRM_DEBUG_KMS("cursor off\n"); 5154 addr = 0; 5155 obj = NULL; 5156 DRM_LOCK(dev); 5157 goto finish; 5158 } 5159 5160 /* Currently we only support 64x64 cursors */ 5161 if (width != 64 || height != 64) { 5162 DRM_ERROR("we currently only support 64x64 cursors\n"); 5163 return -EINVAL; 5164 } 5165 5166 obj = to_intel_bo(drm_gem_object_lookup(dev, file, handle)); 5167 if (&obj->base == NULL) 5168 return -ENOENT; 5169 5170 if (obj->base.size < width * height * 4) { 5171 DRM_ERROR("buffer is to small\n"); 5172 ret = -ENOMEM; 5173 goto fail; 5174 } 5175 5176 /* we only need to pin inside GTT if cursor is non-phy */ 5177 DRM_LOCK(dev); 5178 if (!dev_priv->info->cursor_needs_physical) { 5179 if (obj->tiling_mode) { 5180 DRM_ERROR("cursor cannot be tiled\n"); 5181 ret = -EINVAL; 5182 goto fail_locked; 5183 } 5184 5185 ret = i915_gem_object_pin_to_display_plane(obj, 0, NULL); 5186 if (ret) { 5187 DRM_ERROR("failed to move cursor bo into the GTT\n"); 5188 goto fail_locked; 5189 } 5190 5191 ret = i915_gem_object_put_fence(obj); 5192 if (ret) { 5193 DRM_ERROR("failed to release fence for cursor\n"); 5194 goto fail_unpin; 5195 } 5196 5197 addr = obj->gtt_offset; 5198 } else { 5199 int align = IS_I830(dev) ? 16 * 1024 : 256; 5200 ret = i915_gem_attach_phys_object(dev, obj, 5201 (intel_crtc->pipe == 0) ? I915_GEM_PHYS_CURSOR_0 : I915_GEM_PHYS_CURSOR_1, 5202 align); 5203 if (ret) { 5204 DRM_ERROR("failed to attach phys object\n"); 5205 goto fail_locked; 5206 } 5207 addr = obj->phys_obj->handle->busaddr; 5208 } 5209 5210 if (IS_GEN2(dev)) 5211 I915_WRITE(CURSIZE, (height << 12) | width); 5212 5213 finish: 5214 if (intel_crtc->cursor_bo) { 5215 if (dev_priv->info->cursor_needs_physical) { 5216 if (intel_crtc->cursor_bo != obj) 5217 i915_gem_detach_phys_object(dev, intel_crtc->cursor_bo); 5218 } else 5219 i915_gem_object_unpin_from_display_plane(intel_crtc->cursor_bo); 5220 drm_gem_object_unreference(&intel_crtc->cursor_bo->base); 5221 } 5222 5223 DRM_UNLOCK(dev); 5224 5225 intel_crtc->cursor_addr = addr; 5226 intel_crtc->cursor_bo = obj; 5227 intel_crtc->cursor_width = width; 5228 intel_crtc->cursor_height = height; 5229 5230 intel_crtc_update_cursor(crtc, true); 5231 5232 return 0; 5233fail_unpin: 5234 i915_gem_object_unpin_from_display_plane(obj); 5235fail_locked: 5236 DRM_UNLOCK(dev); 5237fail: 5238 drm_gem_object_unreference_unlocked(&obj->base); 5239 return ret; 5240} 5241 5242static int intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y) 5243{ 5244 struct intel_crtc *intel_crtc = to_intel_crtc(crtc); 5245 5246 intel_crtc->cursor_x = x; 5247 intel_crtc->cursor_y = y; 5248 5249 intel_crtc_update_cursor(crtc, true); 5250 5251 return 0; 5252} 5253 5254/** Sets the color ramps on behalf of RandR */ 5255void intel_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green, 5256 u16 blue, int regno) 5257{ 5258 struct intel_crtc *intel_crtc = to_intel_crtc(crtc); 5259 5260 intel_crtc->lut_r[regno] = red >> 8; 5261 intel_crtc->lut_g[regno] = green >> 8; 5262 intel_crtc->lut_b[regno] = blue >> 8; 5263} 5264 5265void intel_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green, 5266 u16 *blue, int regno) 5267{ 5268 struct intel_crtc *intel_crtc = to_intel_crtc(crtc); 5269 5270 *red = intel_crtc->lut_r[regno] << 8; 5271 *green = intel_crtc->lut_g[regno] << 8; 5272 *blue = intel_crtc->lut_b[regno] << 8; 5273} 5274 5275static void intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green, 5276 u16 *blue, uint32_t start, uint32_t size) 5277{ 5278 int end = (start + size > 256) ? 256 : start + size, i; 5279 struct intel_crtc *intel_crtc = to_intel_crtc(crtc); 5280 5281 for (i = start; i < end; i++) { 5282 intel_crtc->lut_r[i] = red[i] >> 8; 5283 intel_crtc->lut_g[i] = green[i] >> 8; 5284 intel_crtc->lut_b[i] = blue[i] >> 8; 5285 } 5286 5287 intel_crtc_load_lut(crtc); 5288} 5289 5290/** 5291 * Get a pipe with a simple mode set on it for doing load-based monitor 5292 * detection. 5293 * 5294 * It will be up to the load-detect code to adjust the pipe as appropriate for 5295 * its requirements. The pipe will be connected to no other encoders. 5296 * 5297 * Currently this code will only succeed if there is a pipe with no encoders 5298 * configured for it. In the future, it could choose to temporarily disable 5299 * some outputs to free up a pipe for its use. 5300 * 5301 * \return crtc, or NULL if no pipes are available. 5302 */ 5303 5304/* VESA 640x480x72Hz mode to set on the pipe */ 5305static struct drm_display_mode load_detect_mode = { 5306 DRM_MODE("640x480", DRM_MODE_TYPE_DEFAULT, 31500, 640, 664, 5307 704, 832, 0, 480, 489, 491, 520, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), 5308}; 5309 5310static int 5311intel_framebuffer_create(struct drm_device *dev, 5312 struct drm_mode_fb_cmd2 *mode_cmd, struct drm_i915_gem_object *obj, 5313 struct drm_framebuffer **res) 5314{ 5315 struct intel_framebuffer *intel_fb; 5316 int ret; 5317 5318 intel_fb = malloc(sizeof(*intel_fb), DRM_MEM_KMS, M_WAITOK | M_ZERO); 5319 ret = intel_framebuffer_init(dev, intel_fb, mode_cmd, obj); 5320 if (ret) { 5321 drm_gem_object_unreference_unlocked(&obj->base); 5322 free(intel_fb, DRM_MEM_KMS); 5323 return (ret); 5324 } 5325 5326 *res = &intel_fb->base; 5327 return (0); 5328} 5329 5330static u32 5331intel_framebuffer_pitch_for_width(int width, int bpp) 5332{ 5333 u32 pitch = howmany(width * bpp, 8); 5334 return roundup2(pitch, 64); 5335} 5336 5337static u32 5338intel_framebuffer_size_for_mode(struct drm_display_mode *mode, int bpp) 5339{ 5340 u32 pitch = intel_framebuffer_pitch_for_width(mode->hdisplay, bpp); 5341 return roundup2(pitch * mode->vdisplay, PAGE_SIZE); 5342} 5343 5344static int 5345intel_framebuffer_create_for_mode(struct drm_device *dev, 5346 struct drm_display_mode *mode, int depth, int bpp, 5347 struct drm_framebuffer **res) 5348{ 5349 struct drm_i915_gem_object *obj; 5350 struct drm_mode_fb_cmd2 mode_cmd; 5351 5352 obj = i915_gem_alloc_object(dev, 5353 intel_framebuffer_size_for_mode(mode, bpp)); 5354 if (obj == NULL) 5355 return (-ENOMEM); 5356 5357 mode_cmd.width = mode->hdisplay; 5358 mode_cmd.height = mode->vdisplay; 5359 mode_cmd.pitches[0] = intel_framebuffer_pitch_for_width(mode_cmd.width, 5360 bpp); 5361 mode_cmd.pixel_format = drm_mode_legacy_fb_format(bpp, depth); 5362 5363 return (intel_framebuffer_create(dev, &mode_cmd, obj, res)); 5364} 5365 5366static int 5367mode_fits_in_fbdev(struct drm_device *dev, 5368 struct drm_display_mode *mode, struct drm_framebuffer **res) 5369{ 5370 struct drm_i915_private *dev_priv = dev->dev_private; 5371 struct drm_i915_gem_object *obj; 5372 struct drm_framebuffer *fb; 5373 5374 if (dev_priv->fbdev == NULL) { 5375 *res = NULL; 5376 return (0); 5377 } 5378 5379 obj = dev_priv->fbdev->ifb.obj; 5380 if (obj == NULL) { 5381 *res = NULL; 5382 return (0); 5383 } 5384 5385 fb = &dev_priv->fbdev->ifb.base; 5386 if (fb->pitches[0] < intel_framebuffer_pitch_for_width(mode->hdisplay, 5387 fb->bits_per_pixel)) { 5388 *res = NULL; 5389 return (0); 5390 } 5391 5392 if (obj->base.size < mode->vdisplay * fb->pitches[0]) { 5393 *res = NULL; 5394 return (0); 5395 } 5396 5397 *res = fb; 5398 return (0); 5399} 5400 5401bool intel_get_load_detect_pipe(struct intel_encoder *intel_encoder, 5402 struct drm_connector *connector, 5403 struct drm_display_mode *mode, 5404 struct intel_load_detect_pipe *old) 5405{ 5406 struct intel_crtc *intel_crtc; 5407 struct drm_crtc *possible_crtc; 5408 struct drm_encoder *encoder = &intel_encoder->base; 5409 struct drm_crtc *crtc = NULL; 5410 struct drm_device *dev = encoder->dev; 5411 struct drm_framebuffer *old_fb; 5412 int i = -1, r; 5413 5414 DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n", 5415 connector->base.id, drm_get_connector_name(connector), 5416 encoder->base.id, drm_get_encoder_name(encoder)); 5417 5418 /* 5419 * Algorithm gets a little messy: 5420 * 5421 * - if the connector already has an assigned crtc, use it (but make 5422 * sure it's on first) 5423 * 5424 * - try to find the first unused crtc that can drive this connector, 5425 * and use that if we find one 5426 */ 5427 5428 /* See if we already have a CRTC for this connector */ 5429 if (encoder->crtc) { 5430 crtc = encoder->crtc; 5431 5432 intel_crtc = to_intel_crtc(crtc); 5433 old->dpms_mode = intel_crtc->dpms_mode; 5434 old->load_detect_temp = false; 5435 5436 /* Make sure the crtc and connector are running */ 5437 if (intel_crtc->dpms_mode != DRM_MODE_DPMS_ON) { 5438 struct drm_encoder_helper_funcs *encoder_funcs; 5439 struct drm_crtc_helper_funcs *crtc_funcs; 5440 5441 crtc_funcs = crtc->helper_private; 5442 crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON); 5443 5444 encoder_funcs = encoder->helper_private; 5445 encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON); 5446 } 5447 5448 return true; 5449 } 5450 5451 /* Find an unused one (if possible) */ 5452 list_for_each_entry(possible_crtc, &dev->mode_config.crtc_list, head) { 5453 i++; 5454 if (!(encoder->possible_crtcs & (1 << i))) 5455 continue; 5456 if (!possible_crtc->enabled) { 5457 crtc = possible_crtc; 5458 break; 5459 } 5460 } 5461 5462 /* 5463 * If we didn't find an unused CRTC, don't use any. 5464 */ 5465 if (!crtc) { 5466 DRM_DEBUG_KMS("no pipe available for load-detect\n"); 5467 return false; 5468 } 5469 5470 encoder->crtc = crtc; 5471 connector->encoder = encoder; 5472 5473 intel_crtc = to_intel_crtc(crtc); 5474 old->dpms_mode = intel_crtc->dpms_mode; 5475 old->load_detect_temp = true; 5476 old->release_fb = NULL; 5477 5478 if (!mode) 5479 mode = &load_detect_mode; 5480 5481 old_fb = crtc->fb; 5482 5483 /* We need a framebuffer large enough to accommodate all accesses 5484 * that the plane may generate whilst we perform load detection. 5485 * We can not rely on the fbcon either being present (we get called 5486 * during its initialisation to detect all boot displays, or it may 5487 * not even exist) or that it is large enough to satisfy the 5488 * requested mode. 5489 */ 5490 r = mode_fits_in_fbdev(dev, mode, &crtc->fb); 5491 if (crtc->fb == NULL) { 5492 DRM_DEBUG_KMS("creating tmp fb for load-detection\n"); 5493 r = intel_framebuffer_create_for_mode(dev, mode, 24, 32, 5494 &crtc->fb); 5495 old->release_fb = crtc->fb; 5496 } else 5497 DRM_DEBUG_KMS("reusing fbdev for load-detection framebuffer\n"); 5498 if (r != 0) { 5499 DRM_DEBUG_KMS("failed to allocate framebuffer for load-detection\n"); 5500 crtc->fb = old_fb; 5501 return false; 5502 } 5503 5504 if (!drm_crtc_helper_set_mode(crtc, mode, 0, 0, old_fb)) { 5505 DRM_DEBUG_KMS("failed to set mode on load-detect pipe\n"); 5506 if (old->release_fb) 5507 old->release_fb->funcs->destroy(old->release_fb); 5508 crtc->fb = old_fb; 5509 return false; 5510 } 5511 5512 /* let the connector get through one full cycle before testing */ 5513 intel_wait_for_vblank(dev, intel_crtc->pipe); 5514 5515 return true; 5516} 5517 5518void intel_release_load_detect_pipe(struct intel_encoder *intel_encoder, 5519 struct drm_connector *connector, 5520 struct intel_load_detect_pipe *old) 5521{ 5522 struct drm_encoder *encoder = &intel_encoder->base; 5523 struct drm_device *dev = encoder->dev; 5524 struct drm_crtc *crtc = encoder->crtc; 5525 struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private; 5526 struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; 5527 5528 DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n", 5529 connector->base.id, drm_get_connector_name(connector), 5530 encoder->base.id, drm_get_encoder_name(encoder)); 5531 5532 if (old->load_detect_temp) { 5533 connector->encoder = NULL; 5534 drm_helper_disable_unused_functions(dev); 5535 5536 if (old->release_fb) 5537 old->release_fb->funcs->destroy(old->release_fb); 5538 5539 return; 5540 } 5541 5542 /* Switch crtc and encoder back off if necessary */ 5543 if (old->dpms_mode != DRM_MODE_DPMS_ON) { 5544 encoder_funcs->dpms(encoder, old->dpms_mode); 5545 crtc_funcs->dpms(crtc, old->dpms_mode); 5546 } 5547} 5548 5549/* Returns the clock of the currently programmed mode of the given pipe. */ 5550static int intel_crtc_clock_get(struct drm_device *dev, struct drm_crtc *crtc) 5551{ 5552 struct drm_i915_private *dev_priv = dev->dev_private; 5553 struct intel_crtc *intel_crtc = to_intel_crtc(crtc); 5554 int pipe = intel_crtc->pipe; 5555 u32 dpll = I915_READ(DPLL(pipe)); 5556 u32 fp; 5557 intel_clock_t clock; 5558 5559 if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0) 5560 fp = I915_READ(FP0(pipe)); 5561 else 5562 fp = I915_READ(FP1(pipe)); 5563 5564 clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT; 5565 if (IS_PINEVIEW(dev)) { 5566 clock.n = ffs((fp & FP_N_PINEVIEW_DIV_MASK) >> FP_N_DIV_SHIFT) - 1; 5567 clock.m2 = (fp & FP_M2_PINEVIEW_DIV_MASK) >> FP_M2_DIV_SHIFT; 5568 } else { 5569 clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT; 5570 clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT; 5571 } 5572 5573 if (!IS_GEN2(dev)) { 5574 if (IS_PINEVIEW(dev)) 5575 clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_PINEVIEW) >> 5576 DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW); 5577 else 5578 clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK) >> 5579 DPLL_FPA01_P1_POST_DIV_SHIFT); 5580 5581 switch (dpll & DPLL_MODE_MASK) { 5582 case DPLLB_MODE_DAC_SERIAL: 5583 clock.p2 = dpll & DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 ? 5584 5 : 10; 5585 break; 5586 case DPLLB_MODE_LVDS: 5587 clock.p2 = dpll & DPLLB_LVDS_P2_CLOCK_DIV_7 ? 5588 7 : 14; 5589 break; 5590 default: 5591 DRM_DEBUG_KMS("Unknown DPLL mode %08x in programmed " 5592 "mode\n", (int)(dpll & DPLL_MODE_MASK)); 5593 return 0; 5594 } 5595 5596 /* XXX: Handle the 100Mhz refclk */ 5597 intel_clock(dev, 96000, &clock); 5598 } else { 5599 bool is_lvds = (pipe == 1) && (I915_READ(LVDS) & LVDS_PORT_EN); 5600 5601 if (is_lvds) { 5602 clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >> 5603 DPLL_FPA01_P1_POST_DIV_SHIFT); 5604 clock.p2 = 14; 5605 5606 if ((dpll & PLL_REF_INPUT_MASK) == 5607 PLLB_REF_INPUT_SPREADSPECTRUMIN) { 5608 /* XXX: might not be 66MHz */ 5609 intel_clock(dev, 66000, &clock); 5610 } else 5611 intel_clock(dev, 48000, &clock); 5612 } else { 5613 if (dpll & PLL_P1_DIVIDE_BY_TWO) 5614 clock.p1 = 2; 5615 else { 5616 clock.p1 = ((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830) >> 5617 DPLL_FPA01_P1_POST_DIV_SHIFT) + 2; 5618 } 5619 if (dpll & PLL_P2_DIVIDE_BY_4) 5620 clock.p2 = 4; 5621 else 5622 clock.p2 = 2; 5623 5624 intel_clock(dev, 48000, &clock); 5625 } 5626 } 5627 5628 /* XXX: It would be nice to validate the clocks, but we can't reuse 5629 * i830PllIsValid() because it relies on the xf86_config connector 5630 * configuration being accurate, which it isn't necessarily. 5631 */ 5632 5633 return clock.dot; 5634} 5635 5636/** Returns the currently programmed mode of the given pipe. */ 5637struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev, 5638 struct drm_crtc *crtc) 5639{ 5640 struct drm_i915_private *dev_priv = dev->dev_private; 5641 struct intel_crtc *intel_crtc = to_intel_crtc(crtc); 5642 int pipe = intel_crtc->pipe; 5643 struct drm_display_mode *mode; 5644 int htot = I915_READ(HTOTAL(pipe)); 5645 int hsync = I915_READ(HSYNC(pipe)); 5646 int vtot = I915_READ(VTOTAL(pipe)); 5647 int vsync = I915_READ(VSYNC(pipe)); 5648 5649 mode = malloc(sizeof(*mode), DRM_MEM_KMS, M_WAITOK | M_ZERO); 5650 5651 mode->clock = intel_crtc_clock_get(dev, crtc); 5652 mode->hdisplay = (htot & 0xffff) + 1; 5653 mode->htotal = ((htot & 0xffff0000) >> 16) + 1; 5654 mode->hsync_start = (hsync & 0xffff) + 1; 5655 mode->hsync_end = ((hsync & 0xffff0000) >> 16) + 1; 5656 mode->vdisplay = (vtot & 0xffff) + 1; 5657 mode->vtotal = ((vtot & 0xffff0000) >> 16) + 1; 5658 mode->vsync_start = (vsync & 0xffff) + 1; 5659 mode->vsync_end = ((vsync & 0xffff0000) >> 16) + 1; 5660 5661 drm_mode_set_name(mode); 5662 5663 return mode; 5664} 5665 5666#define GPU_IDLE_TIMEOUT (500 /* ms */ * 1000 / hz) 5667 5668/* When this timer fires, we've been idle for awhile */ 5669static void intel_gpu_idle_timer(void *arg) 5670{ 5671 struct drm_device *dev = arg; 5672 drm_i915_private_t *dev_priv = dev->dev_private; 5673 5674 if (!list_empty(&dev_priv->mm.active_list)) { 5675 /* Still processing requests, so just re-arm the timer. */ 5676 callout_schedule(&dev_priv->idle_callout, GPU_IDLE_TIMEOUT); 5677 return; 5678 } 5679 5680 dev_priv->busy = false; 5681 taskqueue_enqueue(dev_priv->tq, &dev_priv->idle_task); 5682} 5683 5684#define CRTC_IDLE_TIMEOUT (1000 /* ms */ * 1000 / hz) 5685 5686static void intel_crtc_idle_timer(void *arg) 5687{ 5688 struct intel_crtc *intel_crtc = arg; 5689 struct drm_crtc *crtc = &intel_crtc->base; 5690 drm_i915_private_t *dev_priv = crtc->dev->dev_private; 5691 struct intel_framebuffer *intel_fb; 5692 5693 intel_fb = to_intel_framebuffer(crtc->fb); 5694 if (intel_fb && intel_fb->obj->active) { 5695 /* The framebuffer is still being accessed by the GPU. */ 5696 callout_schedule(&intel_crtc->idle_callout, CRTC_IDLE_TIMEOUT); 5697 return; 5698 } 5699 5700 intel_crtc->busy = false; 5701 taskqueue_enqueue(dev_priv->tq, &dev_priv->idle_task); 5702} 5703 5704static void intel_increase_pllclock(struct drm_crtc *crtc) 5705{ 5706 struct drm_device *dev = crtc->dev; 5707 drm_i915_private_t *dev_priv = dev->dev_private; 5708 struct intel_crtc *intel_crtc = to_intel_crtc(crtc); 5709 int pipe = intel_crtc->pipe; 5710 int dpll_reg = DPLL(pipe); 5711 int dpll; 5712 5713 if (HAS_PCH_SPLIT(dev)) 5714 return; 5715 5716 if (!dev_priv->lvds_downclock_avail) 5717 return; 5718 5719 dpll = I915_READ(dpll_reg); 5720 if (!HAS_PIPE_CXSR(dev) && (dpll & DISPLAY_RATE_SELECT_FPA1)) { 5721 DRM_DEBUG_DRIVER("upclocking LVDS\n"); 5722 5723 assert_panel_unlocked(dev_priv, pipe); 5724 5725 dpll &= ~DISPLAY_RATE_SELECT_FPA1; 5726 I915_WRITE(dpll_reg, dpll); 5727 intel_wait_for_vblank(dev, pipe); 5728 5729 dpll = I915_READ(dpll_reg); 5730 if (dpll & DISPLAY_RATE_SELECT_FPA1) 5731 DRM_DEBUG_DRIVER("failed to upclock LVDS!\n"); 5732 } 5733 5734 /* Schedule downclock */ 5735 callout_reset(&intel_crtc->idle_callout, CRTC_IDLE_TIMEOUT, 5736 intel_crtc_idle_timer, intel_crtc); 5737} 5738 5739static void intel_decrease_pllclock(struct drm_crtc *crtc) 5740{ 5741 struct drm_device *dev = crtc->dev; 5742 drm_i915_private_t *dev_priv = dev->dev_private; 5743 struct intel_crtc *intel_crtc = to_intel_crtc(crtc); 5744 5745 if (HAS_PCH_SPLIT(dev)) 5746 return; 5747 5748 if (!dev_priv->lvds_downclock_avail) 5749 return; 5750 5751 /* 5752 * Since this is called by a timer, we should never get here in 5753 * the manual case. 5754 */ 5755 if (!HAS_PIPE_CXSR(dev) && intel_crtc->lowfreq_avail) { 5756 int pipe = intel_crtc->pipe; 5757 int dpll_reg = DPLL(pipe); 5758 u32 dpll; 5759 5760 DRM_DEBUG_DRIVER("downclocking LVDS\n"); 5761 5762 assert_panel_unlocked(dev_priv, pipe); 5763 5764 dpll = I915_READ(dpll_reg); 5765 dpll |= DISPLAY_RATE_SELECT_FPA1; 5766 I915_WRITE(dpll_reg, dpll); 5767 intel_wait_for_vblank(dev, pipe); 5768 dpll = I915_READ(dpll_reg); 5769 if (!(dpll & DISPLAY_RATE_SELECT_FPA1)) 5770 DRM_DEBUG_DRIVER("failed to downclock LVDS!\n"); 5771 } 5772} 5773 5774/** 5775 * intel_idle_update - adjust clocks for idleness 5776 * @work: work struct 5777 * 5778 * Either the GPU or display (or both) went idle. Check the busy status 5779 * here and adjust the CRTC and GPU clocks as necessary. 5780 */ 5781static void intel_idle_update(void *arg, int pending) 5782{ 5783 drm_i915_private_t *dev_priv = arg; 5784 struct drm_device *dev = dev_priv->dev; 5785 struct drm_crtc *crtc; 5786 struct intel_crtc *intel_crtc; 5787 5788 if (!i915_powersave) 5789 return; 5790 5791 DRM_LOCK(dev); 5792 5793 i915_update_gfx_val(dev_priv); 5794 5795 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { 5796 /* Skip inactive CRTCs */ 5797 if (!crtc->fb) 5798 continue; 5799 5800 intel_crtc = to_intel_crtc(crtc); 5801 if (!intel_crtc->busy) 5802 intel_decrease_pllclock(crtc); 5803 } 5804 5805 DRM_UNLOCK(dev); 5806} 5807 5808/** 5809 * intel_mark_busy - mark the GPU and possibly the display busy 5810 * @dev: drm device 5811 * @obj: object we're operating on 5812 * 5813 * Callers can use this function to indicate that the GPU is busy processing 5814 * commands. If @obj matches one of the CRTC objects (i.e. it's a scanout 5815 * buffer), we'll also mark the display as busy, so we know to increase its 5816 * clock frequency. 5817 */ 5818void intel_mark_busy(struct drm_device *dev, struct drm_i915_gem_object *obj) 5819{ 5820 drm_i915_private_t *dev_priv = dev->dev_private; 5821 struct drm_crtc *crtc = NULL; 5822 struct intel_framebuffer *intel_fb; 5823 struct intel_crtc *intel_crtc; 5824 5825 if (!drm_core_check_feature(dev, DRIVER_MODESET)) 5826 return; 5827 5828 if (!dev_priv->busy) { 5829 intel_sanitize_pm(dev); 5830 dev_priv->busy = true; 5831 } else 5832 callout_reset(&dev_priv->idle_callout, GPU_IDLE_TIMEOUT, 5833 intel_gpu_idle_timer, dev); 5834 5835 if (obj == NULL) 5836 return; 5837 5838 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { 5839 if (!crtc->fb) 5840 continue; 5841 5842 intel_crtc = to_intel_crtc(crtc); 5843 intel_fb = to_intel_framebuffer(crtc->fb); 5844 if (intel_fb->obj == obj) { 5845 if (!intel_crtc->busy) { 5846 /* Non-busy -> busy, upclock */ 5847 intel_increase_pllclock(crtc); 5848 intel_crtc->busy = true; 5849 } else { 5850 /* Busy -> busy, put off timer */ 5851 callout_reset(&intel_crtc->idle_callout, 5852 CRTC_IDLE_TIMEOUT, intel_crtc_idle_timer, 5853 intel_crtc); 5854 } 5855 } 5856 } 5857} 5858 5859static void intel_crtc_destroy(struct drm_crtc *crtc) 5860{ 5861 struct intel_crtc *intel_crtc = to_intel_crtc(crtc); 5862 struct drm_device *dev = crtc->dev; 5863 struct drm_i915_private *dev_priv = dev->dev_private; 5864 struct intel_unpin_work *work; 5865 5866 mtx_lock(&dev->event_lock); 5867 work = intel_crtc->unpin_work; 5868 intel_crtc->unpin_work = NULL; 5869 mtx_unlock(&dev->event_lock); 5870 5871 if (work) { 5872 taskqueue_cancel(dev_priv->tq, &work->task, NULL); 5873 taskqueue_drain(dev_priv->tq, &work->task); 5874 free(work, DRM_MEM_KMS); 5875 } 5876 5877 drm_crtc_cleanup(crtc); 5878 5879 free(intel_crtc, DRM_MEM_KMS); 5880} 5881 5882static void intel_unpin_work_fn(void *arg, int pending) 5883{ 5884 struct intel_unpin_work *work = arg; 5885 struct drm_device *dev; 5886 5887 dev = work->dev; 5888 DRM_LOCK(dev); 5889 intel_unpin_fb_obj(work->old_fb_obj); 5890 drm_gem_object_unreference(&work->pending_flip_obj->base); 5891 drm_gem_object_unreference(&work->old_fb_obj->base); 5892 5893 intel_update_fbc(work->dev); 5894 DRM_UNLOCK(dev); 5895 free(work, DRM_MEM_KMS); 5896} 5897 5898static void do_intel_finish_page_flip(struct drm_device *dev, 5899 struct drm_crtc *crtc) 5900{ 5901 drm_i915_private_t *dev_priv = dev->dev_private; 5902 struct intel_crtc *intel_crtc = to_intel_crtc(crtc); 5903 struct intel_unpin_work *work; 5904 struct drm_i915_gem_object *obj; 5905 struct drm_pending_vblank_event *e; 5906 struct timeval tnow, tvbl; 5907 5908 /* Ignore early vblank irqs */ 5909 if (intel_crtc == NULL) 5910 return; 5911 5912 microtime(&tnow); 5913 5914 mtx_lock(&dev->event_lock); 5915 work = intel_crtc->unpin_work; 5916 if (work == NULL || !work->pending) { 5917 mtx_unlock(&dev->event_lock); 5918 return; 5919 } 5920 5921 intel_crtc->unpin_work = NULL; 5922 5923 if (work->event) { 5924 e = work->event; 5925 e->event.sequence = drm_vblank_count_and_time(dev, intel_crtc->pipe, &tvbl); 5926 5927 /* Called before vblank count and timestamps have 5928 * been updated for the vblank interval of flip 5929 * completion? Need to increment vblank count and 5930 * add one videorefresh duration to returned timestamp 5931 * to account for this. We assume this happened if we 5932 * get called over 0.9 frame durations after the last 5933 * timestamped vblank. 5934 * 5935 * This calculation can not be used with vrefresh rates 5936 * below 5Hz (10Hz to be on the safe side) without 5937 * promoting to 64 integers. 5938 */ 5939 if (10 * (timeval_to_ns(&tnow) - timeval_to_ns(&tvbl)) > 5940 9 * crtc->framedur_ns) { 5941 e->event.sequence++; 5942 tvbl = ns_to_timeval(timeval_to_ns(&tvbl) + 5943 crtc->framedur_ns); 5944 } 5945 5946 e->event.tv_sec = tvbl.tv_sec; 5947 e->event.tv_usec = tvbl.tv_usec; 5948 5949 list_add_tail(&e->base.link, 5950 &e->base.file_priv->event_list); 5951 drm_event_wakeup(&e->base); 5952 } 5953 5954 drm_vblank_put(dev, intel_crtc->pipe); 5955 5956 obj = work->old_fb_obj; 5957 5958 atomic_clear_int(&obj->pending_flip, 1 << intel_crtc->plane); 5959 if (atomic_load_acq_int(&obj->pending_flip) == 0) 5960 wakeup(&obj->pending_flip); 5961 mtx_unlock(&dev->event_lock); 5962 5963 taskqueue_enqueue(dev_priv->tq, &work->task); 5964 5965 CTR2(KTR_DRM, "i915_flip_complete %d %p", intel_crtc->plane, 5966 work->pending_flip_obj); 5967} 5968 5969void intel_finish_page_flip(struct drm_device *dev, int pipe) 5970{ 5971 drm_i915_private_t *dev_priv = dev->dev_private; 5972 struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe]; 5973 5974 do_intel_finish_page_flip(dev, crtc); 5975} 5976 5977void intel_finish_page_flip_plane(struct drm_device *dev, int plane) 5978{ 5979 drm_i915_private_t *dev_priv = dev->dev_private; 5980 struct drm_crtc *crtc = dev_priv->plane_to_crtc_mapping[plane]; 5981 5982 do_intel_finish_page_flip(dev, crtc); 5983} 5984 5985void intel_prepare_page_flip(struct drm_device *dev, int plane) 5986{ 5987 drm_i915_private_t *dev_priv = dev->dev_private; 5988 struct intel_crtc *intel_crtc = 5989 to_intel_crtc(dev_priv->plane_to_crtc_mapping[plane]); 5990 5991 mtx_lock(&dev->event_lock); 5992 if (intel_crtc->unpin_work) { 5993 if ((++intel_crtc->unpin_work->pending) > 1) 5994 DRM_ERROR("Prepared flip multiple times\n"); 5995 } else { 5996 DRM_DEBUG("preparing flip with no unpin work?\n"); 5997 } 5998 mtx_unlock(&dev->event_lock); 5999} 6000 6001static int intel_gen2_queue_flip(struct drm_device *dev, 6002 struct drm_crtc *crtc, 6003 struct drm_framebuffer *fb, 6004 struct drm_i915_gem_object *obj) 6005{ 6006 struct drm_i915_private *dev_priv = dev->dev_private; 6007 struct intel_crtc *intel_crtc = to_intel_crtc(crtc); 6008 unsigned long offset; 6009 u32 flip_mask; 6010 struct intel_ring_buffer *ring = &dev_priv->rings[RCS]; 6011 int ret; 6012 6013 ret = intel_pin_and_fence_fb_obj(dev, obj, ring); 6014 if (ret) 6015 goto err; 6016 6017 /* Offset into the new buffer for cases of shared fbs between CRTCs */ 6018 offset = crtc->y * fb->pitches[0] + crtc->x * fb->bits_per_pixel/8; 6019 6020 ret = intel_ring_begin(ring, 6); 6021 if (ret) 6022 goto err_unpin; 6023 6024 /* Can't queue multiple flips, so wait for the previous 6025 * one to finish before executing the next. 6026 */ 6027 if (intel_crtc->plane) 6028 flip_mask = MI_WAIT_FOR_PLANE_B_FLIP; 6029 else 6030 flip_mask = MI_WAIT_FOR_PLANE_A_FLIP; 6031 intel_ring_emit(ring, MI_WAIT_FOR_EVENT | flip_mask); 6032 intel_ring_emit(ring, MI_NOOP); 6033 intel_ring_emit(ring, MI_DISPLAY_FLIP | 6034 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); 6035 intel_ring_emit(ring, fb->pitches[0]); 6036 intel_ring_emit(ring, obj->gtt_offset + offset); 6037 intel_ring_emit(ring, 0); /* aux display base address, unused */ 6038 intel_ring_advance(ring); 6039 return 0; 6040 6041err_unpin: 6042 intel_unpin_fb_obj(obj); 6043err: 6044 return ret; 6045} 6046 6047static int intel_gen3_queue_flip(struct drm_device *dev, 6048 struct drm_crtc *crtc, 6049 struct drm_framebuffer *fb, 6050 struct drm_i915_gem_object *obj) 6051{ 6052 struct drm_i915_private *dev_priv = dev->dev_private; 6053 struct intel_crtc *intel_crtc = to_intel_crtc(crtc); 6054 unsigned long offset; 6055 u32 flip_mask; 6056 struct intel_ring_buffer *ring = &dev_priv->rings[RCS]; 6057 int ret; 6058 6059 ret = intel_pin_and_fence_fb_obj(dev, obj, ring); 6060 if (ret) 6061 goto err; 6062 6063 /* Offset into the new buffer for cases of shared fbs between CRTCs */ 6064 offset = crtc->y * fb->pitches[0] + crtc->x * fb->bits_per_pixel/8; 6065 6066 ret = intel_ring_begin(ring, 6); 6067 if (ret) 6068 goto err_unpin; 6069 6070 if (intel_crtc->plane) 6071 flip_mask = MI_WAIT_FOR_PLANE_B_FLIP; 6072 else 6073 flip_mask = MI_WAIT_FOR_PLANE_A_FLIP; 6074 intel_ring_emit(ring, MI_WAIT_FOR_EVENT | flip_mask); 6075 intel_ring_emit(ring, MI_NOOP); 6076 intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 | 6077 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); 6078 intel_ring_emit(ring, fb->pitches[0]); 6079 intel_ring_emit(ring, obj->gtt_offset + offset); 6080 intel_ring_emit(ring, MI_NOOP); 6081 6082 intel_ring_advance(ring); 6083 return 0; 6084 6085err_unpin: 6086 intel_unpin_fb_obj(obj); 6087err: 6088 return ret; 6089} 6090 6091static int intel_gen4_queue_flip(struct drm_device *dev, 6092 struct drm_crtc *crtc, 6093 struct drm_framebuffer *fb, 6094 struct drm_i915_gem_object *obj) 6095{ 6096 struct drm_i915_private *dev_priv = dev->dev_private; 6097 struct intel_crtc *intel_crtc = to_intel_crtc(crtc); 6098 uint32_t pf, pipesrc; 6099 struct intel_ring_buffer *ring = &dev_priv->rings[RCS]; 6100 int ret; 6101 6102 ret = intel_pin_and_fence_fb_obj(dev, obj, ring); 6103 if (ret) 6104 goto err; 6105 6106 ret = intel_ring_begin(ring, 4); 6107 if (ret) 6108 goto err_unpin; 6109 6110 /* i965+ uses the linear or tiled offsets from the 6111 * Display Registers (which do not change across a page-flip) 6112 * so we need only reprogram the base address. 6113 */ 6114 intel_ring_emit(ring, MI_DISPLAY_FLIP | 6115 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); 6116 intel_ring_emit(ring, fb->pitches[0]); 6117 intel_ring_emit(ring, obj->gtt_offset | obj->tiling_mode); 6118 6119 /* XXX Enabling the panel-fitter across page-flip is so far 6120 * untested on non-native modes, so ignore it for now. 6121 * pf = I915_READ(pipe == 0 ? PFA_CTL_1 : PFB_CTL_1) & PF_ENABLE; 6122 */ 6123 pf = 0; 6124 pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff; 6125 intel_ring_emit(ring, pf | pipesrc); 6126 intel_ring_advance(ring); 6127 return 0; 6128 6129err_unpin: 6130 intel_unpin_fb_obj(obj); 6131err: 6132 return ret; 6133} 6134 6135static int intel_gen6_queue_flip(struct drm_device *dev, 6136 struct drm_crtc *crtc, 6137 struct drm_framebuffer *fb, 6138 struct drm_i915_gem_object *obj) 6139{ 6140 struct drm_i915_private *dev_priv = dev->dev_private; 6141 struct intel_crtc *intel_crtc = to_intel_crtc(crtc); 6142 struct intel_ring_buffer *ring = &dev_priv->rings[RCS]; 6143 uint32_t pf, pipesrc; 6144 int ret; 6145 6146 ret = intel_pin_and_fence_fb_obj(dev, obj, ring); 6147 if (ret) 6148 goto err; 6149 6150 ret = intel_ring_begin(ring, 4); 6151 if (ret) 6152 goto err_unpin; 6153 6154 intel_ring_emit(ring, MI_DISPLAY_FLIP | 6155 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); 6156 intel_ring_emit(ring, fb->pitches[0] | obj->tiling_mode); 6157 intel_ring_emit(ring, obj->gtt_offset); 6158 6159 /* Contrary to the suggestions in the documentation, 6160 * "Enable Panel Fitter" does not seem to be required when page 6161 * flipping with a non-native mode, and worse causes a normal 6162 * modeset to fail. 6163 * pf = I915_READ(PF_CTL(intel_crtc->pipe)) & PF_ENABLE; 6164 */ 6165 pf = 0; 6166 pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff; 6167 intel_ring_emit(ring, pf | pipesrc); 6168 intel_ring_advance(ring); 6169 return 0; 6170 6171err_unpin: 6172 intel_unpin_fb_obj(obj); 6173err: 6174 return ret; 6175} 6176 6177/* 6178 * On gen7 we currently use the blit ring because (in early silicon at least) 6179 * the render ring doesn't give us interrpts for page flip completion, which 6180 * means clients will hang after the first flip is queued. Fortunately the 6181 * blit ring generates interrupts properly, so use it instead. 6182 */ 6183static int intel_gen7_queue_flip(struct drm_device *dev, 6184 struct drm_crtc *crtc, 6185 struct drm_framebuffer *fb, 6186 struct drm_i915_gem_object *obj) 6187{ 6188 struct drm_i915_private *dev_priv = dev->dev_private; 6189 struct intel_crtc *intel_crtc = to_intel_crtc(crtc); 6190 struct intel_ring_buffer *ring = &dev_priv->rings[BCS]; 6191 int ret; 6192 6193 ret = intel_pin_and_fence_fb_obj(dev, obj, ring); 6194 if (ret) 6195 goto err; 6196 6197 ret = intel_ring_begin(ring, 4); 6198 if (ret) 6199 goto err_unpin; 6200 6201 intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 | (intel_crtc->plane << 19)); 6202 intel_ring_emit(ring, (fb->pitches[0] | obj->tiling_mode)); 6203 intel_ring_emit(ring, (obj->gtt_offset)); 6204 intel_ring_emit(ring, (MI_NOOP)); 6205 intel_ring_advance(ring); 6206 return 0; 6207 6208err_unpin: 6209 intel_unpin_fb_obj(obj); 6210err: 6211 return ret; 6212} 6213 6214static int intel_default_queue_flip(struct drm_device *dev, 6215 struct drm_crtc *crtc, 6216 struct drm_framebuffer *fb, 6217 struct drm_i915_gem_object *obj) 6218{ 6219 return -ENODEV; 6220} 6221 6222static int intel_crtc_page_flip(struct drm_crtc *crtc, 6223 struct drm_framebuffer *fb, 6224 struct drm_pending_vblank_event *event) 6225{ 6226 struct drm_device *dev = crtc->dev; 6227 struct drm_i915_private *dev_priv = dev->dev_private; 6228 struct intel_framebuffer *intel_fb; 6229 struct drm_i915_gem_object *obj; 6230 struct intel_crtc *intel_crtc = to_intel_crtc(crtc); 6231 struct intel_unpin_work *work; 6232 int ret; 6233 6234 work = malloc(sizeof *work, DRM_MEM_KMS, M_WAITOK | M_ZERO); 6235 6236 work->event = event; 6237 work->dev = crtc->dev; 6238 intel_fb = to_intel_framebuffer(crtc->fb); 6239 work->old_fb_obj = intel_fb->obj; 6240 TASK_INIT(&work->task, 0, intel_unpin_work_fn, work); 6241 6242 ret = drm_vblank_get(dev, intel_crtc->pipe); 6243 if (ret) 6244 goto free_work; 6245 6246 /* We borrow the event spin lock for protecting unpin_work */ 6247 mtx_lock(&dev->event_lock); 6248 if (intel_crtc->unpin_work) { 6249 mtx_unlock(&dev->event_lock); 6250 free(work, DRM_MEM_KMS); 6251 drm_vblank_put(dev, intel_crtc->pipe); 6252 6253 DRM_DEBUG("flip queue: crtc already busy\n"); 6254 return -EBUSY; 6255 } 6256 intel_crtc->unpin_work = work; 6257 mtx_unlock(&dev->event_lock); 6258 6259 intel_fb = to_intel_framebuffer(fb); 6260 obj = intel_fb->obj; 6261 6262 DRM_LOCK(dev); 6263 6264 /* Reference the objects for the scheduled work. */ 6265 drm_gem_object_reference(&work->old_fb_obj->base); 6266 drm_gem_object_reference(&obj->base); 6267 6268 crtc->fb = fb; 6269 6270 work->pending_flip_obj = obj; 6271 6272 work->enable_stall_check = true; 6273 6274 /* Block clients from rendering to the new back buffer until 6275 * the flip occurs and the object is no longer visible. 6276 */ 6277 atomic_set_int(&work->old_fb_obj->pending_flip, 1 << intel_crtc->plane); 6278 6279 ret = dev_priv->display.queue_flip(dev, crtc, fb, obj); 6280 if (ret) 6281 goto cleanup_pending; 6282 intel_disable_fbc(dev); 6283 intel_mark_busy(dev, obj); 6284 DRM_UNLOCK(dev); 6285 6286 CTR2(KTR_DRM, "i915_flip_request %d %p", intel_crtc->plane, obj); 6287 6288 return 0; 6289 6290cleanup_pending: 6291 atomic_clear_int(&work->old_fb_obj->pending_flip, 1 << intel_crtc->plane); 6292 drm_gem_object_unreference(&work->old_fb_obj->base); 6293 drm_gem_object_unreference(&obj->base); 6294 DRM_UNLOCK(dev); 6295 6296 mtx_lock(&dev->event_lock); 6297 intel_crtc->unpin_work = NULL; 6298 mtx_unlock(&dev->event_lock); 6299 6300 drm_vblank_put(dev, intel_crtc->pipe); 6301free_work: 6302 free(work, DRM_MEM_KMS); 6303 6304 return ret; 6305} 6306 6307static void intel_sanitize_modesetting(struct drm_device *dev, 6308 int pipe, int plane) 6309{ 6310 struct drm_i915_private *dev_priv = dev->dev_private; 6311 u32 reg, val; 6312 int i; 6313 6314 /* Clear any frame start delays used for debugging left by the BIOS */ 6315 for_each_pipe(i) { 6316 reg = PIPECONF(i); 6317 I915_WRITE(reg, I915_READ(reg) & ~PIPECONF_FRAME_START_DELAY_MASK); 6318 } 6319 6320 if (HAS_PCH_SPLIT(dev)) 6321 return; 6322 6323 /* Who knows what state these registers were left in by the BIOS or 6324 * grub? 6325 * 6326 * If we leave the registers in a conflicting state (e.g. with the 6327 * display plane reading from the other pipe than the one we intend 6328 * to use) then when we attempt to teardown the active mode, we will 6329 * not disable the pipes and planes in the correct order -- leaving 6330 * a plane reading from a disabled pipe and possibly leading to 6331 * undefined behaviour. 6332 */ 6333 6334 reg = DSPCNTR(plane); 6335 val = I915_READ(reg); 6336 6337 if ((val & DISPLAY_PLANE_ENABLE) == 0) 6338 return; 6339 if (!!(val & DISPPLANE_SEL_PIPE_MASK) == pipe) 6340 return; 6341 6342 /* This display plane is active and attached to the other CPU pipe. */ 6343 pipe = !pipe; 6344 6345 /* Disable the plane and wait for it to stop reading from the pipe. */ 6346 intel_disable_plane(dev_priv, plane, pipe); 6347 intel_disable_pipe(dev_priv, pipe); 6348} 6349 6350static void intel_crtc_reset(struct drm_crtc *crtc) 6351{ 6352 struct drm_device *dev = crtc->dev; 6353 struct intel_crtc *intel_crtc = to_intel_crtc(crtc); 6354 6355 /* Reset flags back to the 'unknown' status so that they 6356 * will be correctly set on the initial modeset. 6357 */ 6358 intel_crtc->dpms_mode = -1; 6359 6360 /* We need to fix up any BIOS configuration that conflicts with 6361 * our expectations. 6362 */ 6363 intel_sanitize_modesetting(dev, intel_crtc->pipe, intel_crtc->plane); 6364} 6365 6366static struct drm_crtc_helper_funcs intel_helper_funcs = { 6367 .dpms = intel_crtc_dpms, 6368 .mode_fixup = intel_crtc_mode_fixup, 6369 .mode_set = intel_crtc_mode_set, 6370 .mode_set_base = intel_pipe_set_base, 6371 .mode_set_base_atomic = intel_pipe_set_base_atomic, 6372 .load_lut = intel_crtc_load_lut, 6373 .disable = intel_crtc_disable, 6374}; 6375 6376static const struct drm_crtc_funcs intel_crtc_funcs = { 6377 .reset = intel_crtc_reset, 6378 .cursor_set = intel_crtc_cursor_set, 6379 .cursor_move = intel_crtc_cursor_move, 6380 .gamma_set = intel_crtc_gamma_set, 6381 .set_config = drm_crtc_helper_set_config, 6382 .destroy = intel_crtc_destroy, 6383 .page_flip = intel_crtc_page_flip, 6384}; 6385 6386static void intel_pch_pll_init(struct drm_device *dev) 6387{ 6388 drm_i915_private_t *dev_priv = dev->dev_private; 6389 int i; 6390 6391 if (dev_priv->num_pch_pll == 0) { 6392 DRM_DEBUG_KMS("No PCH PLLs on this hardware, skipping initialisation\n"); 6393 return; 6394 } 6395 6396 for (i = 0; i < dev_priv->num_pch_pll; i++) { 6397 dev_priv->pch_plls[i].pll_reg = _PCH_DPLL(i); 6398 dev_priv->pch_plls[i].fp0_reg = _PCH_FP0(i); 6399 dev_priv->pch_plls[i].fp1_reg = _PCH_FP1(i); 6400 } 6401} 6402 6403static void intel_crtc_init(struct drm_device *dev, int pipe) 6404{ 6405 drm_i915_private_t *dev_priv = dev->dev_private; 6406 struct intel_crtc *intel_crtc; 6407 int i; 6408 6409 intel_crtc = malloc(sizeof(struct intel_crtc) + 6410 (INTELFB_CONN_LIMIT * sizeof(struct drm_connector *)), 6411 DRM_MEM_KMS, M_WAITOK | M_ZERO); 6412 6413 drm_crtc_init(dev, &intel_crtc->base, &intel_crtc_funcs); 6414 6415 drm_mode_crtc_set_gamma_size(&intel_crtc->base, 256); 6416 for (i = 0; i < 256; i++) { 6417 intel_crtc->lut_r[i] = i; 6418 intel_crtc->lut_g[i] = i; 6419 intel_crtc->lut_b[i] = i; 6420 } 6421 6422 /* Swap pipes & planes for FBC on pre-965 */ 6423 intel_crtc->pipe = pipe; 6424 intel_crtc->plane = pipe; 6425 if (IS_MOBILE(dev) && IS_GEN3(dev)) { 6426 DRM_DEBUG_KMS("swapping pipes & planes for FBC\n"); 6427 intel_crtc->plane = !pipe; 6428 } 6429 6430 KASSERT(pipe < DRM_ARRAY_SIZE(dev_priv->plane_to_crtc_mapping) && 6431 dev_priv->plane_to_crtc_mapping[intel_crtc->plane] == NULL, 6432 ("plane_to_crtc is already initialized")); 6433 dev_priv->plane_to_crtc_mapping[intel_crtc->plane] = &intel_crtc->base; 6434 dev_priv->pipe_to_crtc_mapping[intel_crtc->pipe] = &intel_crtc->base; 6435 6436 intel_crtc_reset(&intel_crtc->base); 6437 intel_crtc->active = true; /* force the pipe off on setup_init_config */ 6438 intel_crtc->bpp = 24; /* default for pre-Ironlake */ 6439 6440 if (HAS_PCH_SPLIT(dev)) { 6441 intel_helper_funcs.prepare = ironlake_crtc_prepare; 6442 intel_helper_funcs.commit = ironlake_crtc_commit; 6443 } else { 6444 intel_helper_funcs.prepare = i9xx_crtc_prepare; 6445 intel_helper_funcs.commit = i9xx_crtc_commit; 6446 } 6447 6448 drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs); 6449 6450 intel_crtc->busy = false; 6451 6452 callout_init(&intel_crtc->idle_callout, 1); 6453} 6454 6455int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data, 6456 struct drm_file *file) 6457{ 6458 struct drm_i915_get_pipe_from_crtc_id *pipe_from_crtc_id = data; 6459 struct drm_mode_object *drmmode_obj; 6460 struct intel_crtc *crtc; 6461 6462 if (!drm_core_check_feature(dev, DRIVER_MODESET)) 6463 return -ENODEV; 6464 6465 drmmode_obj = drm_mode_object_find(dev, pipe_from_crtc_id->crtc_id, 6466 DRM_MODE_OBJECT_CRTC); 6467 6468 if (!drmmode_obj) { 6469 DRM_ERROR("no such CRTC id\n"); 6470 return -EINVAL; 6471 } 6472 6473 crtc = to_intel_crtc(obj_to_crtc(drmmode_obj)); 6474 pipe_from_crtc_id->pipe = crtc->pipe; 6475 6476 return 0; 6477} 6478 6479static int intel_encoder_clones(struct drm_device *dev, int type_mask) 6480{ 6481 struct intel_encoder *encoder; 6482 int index_mask = 0; 6483 int entry = 0; 6484 6485 list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) { 6486 if (type_mask & encoder->clone_mask) 6487 index_mask |= (1 << entry); 6488 entry++; 6489 } 6490 6491 return index_mask; 6492} 6493 6494static bool has_edp_a(struct drm_device *dev) 6495{ 6496 struct drm_i915_private *dev_priv = dev->dev_private; 6497 6498 if (!IS_MOBILE(dev)) 6499 return false; 6500 6501 if ((I915_READ(DP_A) & DP_DETECTED) == 0) 6502 return false; 6503 6504 if (IS_GEN5(dev) && 6505 (I915_READ(ILK_DISPLAY_CHICKEN_FUSES) & ILK_eDP_A_DISABLE)) 6506 return false; 6507 6508 return true; 6509} 6510 6511static void intel_setup_outputs(struct drm_device *dev) 6512{ 6513 struct drm_i915_private *dev_priv = dev->dev_private; 6514 struct intel_encoder *encoder; 6515 bool dpd_is_edp = false; 6516 bool has_lvds; 6517 6518 has_lvds = intel_lvds_init(dev); 6519 if (!has_lvds && !HAS_PCH_SPLIT(dev)) { 6520 /* disable the panel fitter on everything but LVDS */ 6521 I915_WRITE(PFIT_CONTROL, 0); 6522 } 6523 6524 if (HAS_PCH_SPLIT(dev)) { 6525 dpd_is_edp = intel_dpd_is_edp(dev); 6526 6527 if (has_edp_a(dev)) 6528 intel_dp_init(dev, DP_A); 6529 6530 if (dpd_is_edp && (I915_READ(PCH_DP_D) & DP_DETECTED)) 6531 intel_dp_init(dev, PCH_DP_D); 6532 } 6533 6534 intel_crt_init(dev); 6535 6536 if (IS_HASWELL(dev)) { 6537 int found; 6538 6539 /* Haswell uses DDI functions to detect digital outputs */ 6540 found = I915_READ(DDI_BUF_CTL_A) & DDI_INIT_DISPLAY_DETECTED; 6541 /* DDI A only supports eDP */ 6542 if (found) 6543 intel_ddi_init(dev, PORT_A); 6544 6545 /* DDI B, C and D detection is indicated by the SFUSE_STRAP 6546 * register */ 6547 found = I915_READ(SFUSE_STRAP); 6548 6549 if (found & SFUSE_STRAP_DDIB_DETECTED) 6550 intel_ddi_init(dev, PORT_B); 6551 if (found & SFUSE_STRAP_DDIC_DETECTED) 6552 intel_ddi_init(dev, PORT_C); 6553 if (found & SFUSE_STRAP_DDID_DETECTED) 6554 intel_ddi_init(dev, PORT_D); 6555 } else if (HAS_PCH_SPLIT(dev)) { 6556 int found; 6557 6558 DRM_DEBUG_KMS( 6559"HDMIB %d PCH_DP_B %d HDMIC %d HDMID %d PCH_DP_C %d PCH_DP_D %d LVDS %d\n", 6560 (I915_READ(HDMIB) & PORT_DETECTED) != 0, 6561 (I915_READ(PCH_DP_B) & DP_DETECTED) != 0, 6562 (I915_READ(HDMIC) & PORT_DETECTED) != 0, 6563 (I915_READ(HDMID) & PORT_DETECTED) != 0, 6564 (I915_READ(PCH_DP_C) & DP_DETECTED) != 0, 6565 (I915_READ(PCH_DP_D) & DP_DETECTED) != 0, 6566 (I915_READ(PCH_LVDS) & LVDS_DETECTED) != 0); 6567 6568 if (I915_READ(HDMIB) & PORT_DETECTED) { 6569 /* PCH SDVOB multiplex with HDMIB */ 6570 found = intel_sdvo_init(dev, PCH_SDVOB, true); 6571 if (!found) 6572 intel_hdmi_init(dev, HDMIB); 6573 if (!found && (I915_READ(PCH_DP_B) & DP_DETECTED)) 6574 intel_dp_init(dev, PCH_DP_B); 6575 } 6576 6577 if (I915_READ(HDMIC) & PORT_DETECTED) 6578 intel_hdmi_init(dev, HDMIC); 6579 6580 if (I915_READ(HDMID) & PORT_DETECTED) 6581 intel_hdmi_init(dev, HDMID); 6582 6583 if (I915_READ(PCH_DP_C) & DP_DETECTED) 6584 intel_dp_init(dev, PCH_DP_C); 6585 6586 if (!dpd_is_edp && (I915_READ(PCH_DP_D) & DP_DETECTED)) 6587 intel_dp_init(dev, PCH_DP_D); 6588 6589 } else if (SUPPORTS_DIGITAL_OUTPUTS(dev)) { 6590 bool found = false; 6591 6592 if (I915_READ(SDVOB) & SDVO_DETECTED) { 6593 DRM_DEBUG_KMS("probing SDVOB\n"); 6594 found = intel_sdvo_init(dev, SDVOB, true); 6595 if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) { 6596 DRM_DEBUG_KMS("probing HDMI on SDVOB\n"); 6597 intel_hdmi_init(dev, SDVOB); 6598 } 6599 6600 if (!found && SUPPORTS_INTEGRATED_DP(dev)) { 6601 DRM_DEBUG_KMS("probing DP_B\n"); 6602 intel_dp_init(dev, DP_B); 6603 } 6604 } 6605 6606 /* Before G4X SDVOC doesn't have its own detect register */ 6607 6608 if (I915_READ(SDVOB) & SDVO_DETECTED) { 6609 DRM_DEBUG_KMS("probing SDVOC\n"); 6610 found = intel_sdvo_init(dev, SDVOC, false); 6611 } 6612 6613 if (!found && (I915_READ(SDVOC) & SDVO_DETECTED)) { 6614 6615 if (SUPPORTS_INTEGRATED_HDMI(dev)) { 6616 DRM_DEBUG_KMS("probing HDMI on SDVOC\n"); 6617 intel_hdmi_init(dev, SDVOC); 6618 } 6619 if (SUPPORTS_INTEGRATED_DP(dev)) { 6620 DRM_DEBUG_KMS("probing DP_C\n"); 6621 intel_dp_init(dev, DP_C); 6622 } 6623 } 6624 6625 if (SUPPORTS_INTEGRATED_DP(dev) && 6626 (I915_READ(DP_D) & DP_DETECTED)) { 6627 DRM_DEBUG_KMS("probing DP_D\n"); 6628 intel_dp_init(dev, DP_D); 6629 } 6630 } else if (IS_GEN2(dev)) { 6631#if 1 6632 KIB_NOTYET(); 6633#else 6634 intel_dvo_init(dev); 6635#endif 6636 } 6637 6638 if (SUPPORTS_TV(dev)) 6639 intel_tv_init(dev); 6640 6641 list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) { 6642 encoder->base.possible_crtcs = encoder->crtc_mask; 6643 encoder->base.possible_clones = 6644 intel_encoder_clones(dev, encoder->clone_mask); 6645 } 6646 6647 /* disable all the possible outputs/crtcs before entering KMS mode */ 6648 drm_helper_disable_unused_functions(dev); 6649 6650 if (HAS_PCH_SPLIT(dev)) 6651 ironlake_init_pch_refclk(dev); 6652} 6653 6654static void intel_user_framebuffer_destroy(struct drm_framebuffer *fb) 6655{ 6656 struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb); 6657 6658 drm_framebuffer_cleanup(fb); 6659 drm_gem_object_unreference_unlocked(&intel_fb->obj->base); 6660 6661 free(intel_fb, DRM_MEM_KMS); 6662} 6663 6664static int intel_user_framebuffer_create_handle(struct drm_framebuffer *fb, 6665 struct drm_file *file, 6666 unsigned int *handle) 6667{ 6668 struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb); 6669 struct drm_i915_gem_object *obj = intel_fb->obj; 6670 6671 return drm_gem_handle_create(file, &obj->base, handle); 6672} 6673 6674static const struct drm_framebuffer_funcs intel_fb_funcs = { 6675 .destroy = intel_user_framebuffer_destroy, 6676 .create_handle = intel_user_framebuffer_create_handle, 6677}; 6678 6679int intel_framebuffer_init(struct drm_device *dev, 6680 struct intel_framebuffer *intel_fb, 6681 struct drm_mode_fb_cmd2 *mode_cmd, 6682 struct drm_i915_gem_object *obj) 6683{ 6684 int ret; 6685 6686 if (obj->tiling_mode == I915_TILING_Y) 6687 return -EINVAL; 6688 6689 if (mode_cmd->pitches[0] & 63) 6690 return -EINVAL; 6691 6692 switch (mode_cmd->pixel_format) { 6693 case DRM_FORMAT_RGB332: 6694 case DRM_FORMAT_RGB565: 6695 case DRM_FORMAT_XRGB8888: 6696 case DRM_FORMAT_XBGR8888: 6697 case DRM_FORMAT_ARGB8888: 6698 case DRM_FORMAT_XRGB2101010: 6699 case DRM_FORMAT_ARGB2101010: 6700 /* RGB formats are common across chipsets */ 6701 break; 6702 case DRM_FORMAT_YUYV: 6703 case DRM_FORMAT_UYVY: 6704 case DRM_FORMAT_YVYU: 6705 case DRM_FORMAT_VYUY: 6706 break; 6707 default: 6708 DRM_DEBUG_KMS("unsupported pixel format %u\n", 6709 mode_cmd->pixel_format); 6710 return -EINVAL; 6711 } 6712 6713 ret = drm_framebuffer_init(dev, &intel_fb->base, &intel_fb_funcs); 6714 if (ret) { 6715 DRM_ERROR("framebuffer init failed %d\n", ret); 6716 return ret; 6717 } 6718 6719 drm_helper_mode_fill_fb_struct(&intel_fb->base, mode_cmd); 6720 intel_fb->obj = obj; 6721 return 0; 6722} 6723 6724static int 6725intel_user_framebuffer_create(struct drm_device *dev, 6726 struct drm_file *filp, struct drm_mode_fb_cmd2 *mode_cmd, 6727 struct drm_framebuffer **res) 6728{ 6729 struct drm_i915_gem_object *obj; 6730 6731 obj = to_intel_bo(drm_gem_object_lookup(dev, filp, 6732 mode_cmd->handles[0])); 6733 if (&obj->base == NULL) 6734 return (-ENOENT); 6735 6736 return (intel_framebuffer_create(dev, mode_cmd, obj, res)); 6737} 6738 6739static const struct drm_mode_config_funcs intel_mode_funcs = { 6740 .fb_create = intel_user_framebuffer_create, 6741 .output_poll_changed = intel_fb_output_poll_changed, 6742}; 6743 6744/* Set up chip specific display functions */ 6745static void intel_init_display(struct drm_device *dev) 6746{ 6747 struct drm_i915_private *dev_priv = dev->dev_private; 6748 6749 /* We always want a DPMS function */ 6750 if (HAS_PCH_SPLIT(dev)) { 6751 dev_priv->display.dpms = ironlake_crtc_dpms; 6752 dev_priv->display.crtc_mode_set = ironlake_crtc_mode_set; 6753 dev_priv->display.off = ironlake_crtc_off; 6754 dev_priv->display.update_plane = ironlake_update_plane; 6755 } else { 6756 dev_priv->display.dpms = i9xx_crtc_dpms; 6757 dev_priv->display.crtc_mode_set = i9xx_crtc_mode_set; 6758 dev_priv->display.off = i9xx_crtc_off; 6759 dev_priv->display.update_plane = i9xx_update_plane; 6760 } 6761 6762 /* Returns the core display clock speed */ 6763 if (IS_VALLEYVIEW(dev)) 6764 dev_priv->display.get_display_clock_speed = 6765 valleyview_get_display_clock_speed; 6766 else if (IS_I945G(dev) || (IS_G33(dev) && !IS_PINEVIEW_M(dev))) 6767 dev_priv->display.get_display_clock_speed = 6768 i945_get_display_clock_speed; 6769 else if (IS_I915G(dev)) 6770 dev_priv->display.get_display_clock_speed = 6771 i915_get_display_clock_speed; 6772 else if (IS_I945GM(dev) || IS_845G(dev) || IS_PINEVIEW_M(dev)) 6773 dev_priv->display.get_display_clock_speed = 6774 i9xx_misc_get_display_clock_speed; 6775 else if (IS_I915GM(dev)) 6776 dev_priv->display.get_display_clock_speed = 6777 i915gm_get_display_clock_speed; 6778 else if (IS_I865G(dev)) 6779 dev_priv->display.get_display_clock_speed = 6780 i865_get_display_clock_speed; 6781 else if (IS_I85X(dev)) 6782 dev_priv->display.get_display_clock_speed = 6783 i855_get_display_clock_speed; 6784 else /* 852, 830 */ 6785 dev_priv->display.get_display_clock_speed = 6786 i830_get_display_clock_speed; 6787 6788 if (HAS_PCH_SPLIT(dev)) { 6789 if (IS_GEN5(dev)) { 6790 dev_priv->display.fdi_link_train = ironlake_fdi_link_train; 6791 dev_priv->display.write_eld = ironlake_write_eld; 6792 } else if (IS_GEN6(dev)) { 6793 dev_priv->display.fdi_link_train = gen6_fdi_link_train; 6794 dev_priv->display.write_eld = ironlake_write_eld; 6795 } else if (IS_IVYBRIDGE(dev)) { 6796 /* FIXME: detect B0+ stepping and use auto training */ 6797 dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train; 6798 dev_priv->display.write_eld = ironlake_write_eld; 6799 } else if (IS_HASWELL(dev)) { 6800 dev_priv->display.fdi_link_train = hsw_fdi_link_train; 6801 dev_priv->display.write_eld = ironlake_write_eld; 6802 } else 6803 dev_priv->display.update_wm = NULL; 6804 } else if (IS_VALLEYVIEW(dev)) { 6805 dev_priv->display.force_wake_get = vlv_force_wake_get; 6806 dev_priv->display.force_wake_put = vlv_force_wake_put; 6807 } else if (IS_G4X(dev)) { 6808 dev_priv->display.write_eld = g4x_write_eld; 6809 } 6810 6811 /* Default just returns -ENODEV to indicate unsupported */ 6812 dev_priv->display.queue_flip = intel_default_queue_flip; 6813 6814 switch (INTEL_INFO(dev)->gen) { 6815 case 2: 6816 dev_priv->display.queue_flip = intel_gen2_queue_flip; 6817 break; 6818 6819 case 3: 6820 dev_priv->display.queue_flip = intel_gen3_queue_flip; 6821 break; 6822 6823 case 4: 6824 case 5: 6825 dev_priv->display.queue_flip = intel_gen4_queue_flip; 6826 break; 6827 6828 case 6: 6829 dev_priv->display.queue_flip = intel_gen6_queue_flip; 6830 break; 6831 case 7: 6832 dev_priv->display.queue_flip = intel_gen7_queue_flip; 6833 break; 6834 } 6835} 6836 6837/* 6838 * Some BIOSes insist on assuming the GPU's pipe A is enabled at suspend, 6839 * resume, or other times. This quirk makes sure that's the case for 6840 * affected systems. 6841 */ 6842static void quirk_pipea_force(struct drm_device *dev) 6843{ 6844 struct drm_i915_private *dev_priv = dev->dev_private; 6845 6846 dev_priv->quirks |= QUIRK_PIPEA_FORCE; 6847 DRM_INFO("applying pipe a force quirk\n"); 6848} 6849 6850/* 6851 * Some machines (Lenovo U160) do not work with SSC on LVDS for some reason 6852 */ 6853static void quirk_ssc_force_disable(struct drm_device *dev) 6854{ 6855 struct drm_i915_private *dev_priv = dev->dev_private; 6856 dev_priv->quirks |= QUIRK_LVDS_SSC_DISABLE; 6857 DRM_INFO("applying lvds SSC disable quirk\n"); 6858} 6859 6860/* 6861 * A machine (e.g. Acer Aspire 5734Z) may need to invert the panel backlight 6862 * brightness value 6863 */ 6864static void quirk_invert_brightness(struct drm_device *dev) 6865{ 6866 struct drm_i915_private *dev_priv = dev->dev_private; 6867 dev_priv->quirks |= QUIRK_INVERT_BRIGHTNESS; 6868 DRM_INFO("applying inverted panel brightness quirk\n"); 6869} 6870 6871struct intel_quirk { 6872 int device; 6873 int subsystem_vendor; 6874 int subsystem_device; 6875 void (*hook)(struct drm_device *dev); 6876}; 6877 6878#define PCI_ANY_ID (~0u) 6879 6880static struct intel_quirk intel_quirks[] = { 6881 /* HP Mini needs pipe A force quirk (LP: #322104) */ 6882 { 0x27ae, 0x103c, 0x361a, quirk_pipea_force }, 6883 6884 /* Thinkpad R31 needs pipe A force quirk */ 6885 { 0x3577, 0x1014, 0x0505, quirk_pipea_force }, 6886 /* Toshiba Protege R-205, S-209 needs pipe A force quirk */ 6887 { 0x2592, 0x1179, 0x0001, quirk_pipea_force }, 6888 6889 /* ThinkPad X30 needs pipe A force quirk (LP: #304614) */ 6890 { 0x3577, 0x1014, 0x0513, quirk_pipea_force }, 6891 /* ThinkPad X40 needs pipe A force quirk */ 6892 6893 /* ThinkPad T60 needs pipe A force quirk (bug #16494) */ 6894 { 0x2782, 0x17aa, 0x201a, quirk_pipea_force }, 6895 6896 /* 855 & before need to leave pipe A & dpll A up */ 6897 { 0x3582, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force }, 6898 { 0x2562, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force }, 6899 6900 /* Lenovo U160 cannot use SSC on LVDS */ 6901 { 0x0046, 0x17aa, 0x3920, quirk_ssc_force_disable }, 6902 6903 /* Sony Vaio Y cannot use SSC on LVDS */ 6904 { 0x0046, 0x104d, 0x9076, quirk_ssc_force_disable }, 6905 6906 /* Acer Aspire 5734Z must invert backlight brightness */ 6907 { 0x2a42, 0x1025, 0x0459, quirk_invert_brightness }, 6908}; 6909 6910static void intel_init_quirks(struct drm_device *dev) 6911{ 6912 struct intel_quirk *q; 6913 device_t d; 6914 int i; 6915 6916 d = dev->dev; 6917 for (i = 0; i < ARRAY_SIZE(intel_quirks); i++) { 6918 q = &intel_quirks[i]; 6919 if (pci_get_device(d) == q->device && 6920 (pci_get_subvendor(d) == q->subsystem_vendor || 6921 q->subsystem_vendor == PCI_ANY_ID) && 6922 (pci_get_subdevice(d) == q->subsystem_device || 6923 q->subsystem_device == PCI_ANY_ID)) 6924 q->hook(dev); 6925 } 6926} 6927 6928/* Disable the VGA plane that we never use */ 6929static void i915_disable_vga(struct drm_device *dev) 6930{ 6931 struct drm_i915_private *dev_priv = dev->dev_private; 6932 u8 sr1; 6933 u32 vga_reg; 6934 6935 if (HAS_PCH_SPLIT(dev)) 6936 vga_reg = CPU_VGACNTRL; 6937 else 6938 vga_reg = VGACNTRL; 6939 6940#if 0 6941 vga_get_uninterruptible(dev->pdev, VGA_RSRC_LEGACY_IO); 6942#endif 6943 outb(VGA_SR_INDEX, SR01); 6944 sr1 = inb(VGA_SR_DATA); 6945 outb(VGA_SR_DATA, sr1 | 1 << 5); 6946#if 0 6947 vga_put(dev->pdev, VGA_RSRC_LEGACY_IO); 6948#endif 6949 DELAY(300); 6950 6951 I915_WRITE(vga_reg, VGA_DISP_DISABLE); 6952 POSTING_READ(vga_reg); 6953} 6954 6955static void ivb_pch_pwm_override(struct drm_device *dev) 6956{ 6957 struct drm_i915_private *dev_priv = dev->dev_private; 6958 6959 /* 6960 * IVB has CPU eDP backlight regs too, set things up to let the 6961 * PCH regs control the backlight 6962 */ 6963 I915_WRITE(BLC_PWM_CPU_CTL2, PWM_ENABLE); 6964 I915_WRITE(BLC_PWM_CPU_CTL, 0); 6965 I915_WRITE(BLC_PWM_PCH_CTL1, PWM_ENABLE); 6966} 6967 6968void intel_modeset_init_hw(struct drm_device *dev) 6969{ 6970 struct drm_i915_private *dev_priv = dev->dev_private; 6971 6972 intel_init_clock_gating(dev); 6973 6974 if (IS_IRONLAKE_M(dev)) { 6975 ironlake_enable_drps(dev); 6976 ironlake_enable_rc6(dev); 6977 intel_init_emon(dev); 6978 } 6979 6980 if ((IS_GEN6(dev) || IS_GEN7(dev)) && !IS_VALLEYVIEW(dev)) { 6981 gen6_enable_rps(dev_priv); 6982 gen6_update_ring_freq(dev_priv); 6983 } 6984 6985 if (IS_IVYBRIDGE(dev)) 6986 ivb_pch_pwm_override(dev); 6987} 6988 6989void intel_modeset_init(struct drm_device *dev) 6990{ 6991 struct drm_i915_private *dev_priv = dev->dev_private; 6992 int i, ret; 6993 6994 drm_mode_config_init(dev); 6995 6996 dev->mode_config.min_width = 0; 6997 dev->mode_config.min_height = 0; 6998 6999 dev->mode_config.preferred_depth = 24; 7000 dev->mode_config.prefer_shadow = 1; 7001 7002 dev->mode_config.funcs = &intel_mode_funcs; 7003 7004 intel_init_quirks(dev); 7005 7006 intel_init_pm(dev); 7007 7008 intel_prepare_ddi(dev); 7009 7010 intel_init_display(dev); 7011 7012 if (IS_GEN2(dev)) { 7013 dev->mode_config.max_width = 2048; 7014 dev->mode_config.max_height = 2048; 7015 } else if (IS_GEN3(dev)) { 7016 dev->mode_config.max_width = 4096; 7017 dev->mode_config.max_height = 4096; 7018 } else { 7019 dev->mode_config.max_width = 8192; 7020 dev->mode_config.max_height = 8192; 7021 } 7022 dev->mode_config.fb_base = dev->agp->base; 7023 7024 DRM_DEBUG_KMS("%d display pipe%s available.\n", 7025 dev_priv->num_pipe, dev_priv->num_pipe > 1 ? "s" : ""); 7026 7027 for (i = 0; i < dev_priv->num_pipe; i++) { 7028 intel_crtc_init(dev, i); 7029 ret = intel_plane_init(dev, i); 7030 if (ret) 7031 DRM_DEBUG_KMS("plane %d init failed: %d\n", i, ret); 7032 } 7033 7034 intel_pch_pll_init(dev); 7035 7036 /* Just disable it once at startup */ 7037 i915_disable_vga(dev); 7038 intel_setup_outputs(dev); 7039 7040 TASK_INIT(&dev_priv->idle_task, 0, intel_idle_update, dev_priv); 7041 callout_init(&dev_priv->idle_callout, 1); 7042} 7043 7044void intel_modeset_gem_init(struct drm_device *dev) 7045{ 7046 intel_modeset_init_hw(dev); 7047 7048 intel_setup_overlay(dev); 7049} 7050 7051void intel_modeset_cleanup(struct drm_device *dev) 7052{ 7053 struct drm_i915_private *dev_priv = dev->dev_private; 7054 struct drm_crtc *crtc; 7055 struct intel_crtc *intel_crtc; 7056 7057 drm_kms_helper_poll_fini(dev); 7058 DRM_LOCK(dev); 7059 7060#if 0 7061 intel_unregister_dsm_handler(); 7062#endif 7063 7064 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { 7065 /* Skip inactive CRTCs */ 7066 if (!crtc->fb) 7067 continue; 7068 7069 intel_crtc = to_intel_crtc(crtc); 7070 intel_increase_pllclock(crtc); 7071 } 7072 7073 intel_disable_fbc(dev); 7074 7075 if (IS_IRONLAKE_M(dev)) 7076 ironlake_disable_drps(dev); 7077 if ((IS_GEN6(dev) || IS_GEN7(dev)) && !IS_VALLEYVIEW(dev)) 7078 gen6_disable_rps(dev); 7079 7080 if (IS_IRONLAKE_M(dev)) 7081 ironlake_disable_rc6(dev); 7082 7083 if (IS_VALLEYVIEW(dev)) 7084 vlv_init_dpio(dev); 7085 7086 DRM_UNLOCK(dev); 7087 7088 /* Disable the irq before mode object teardown, for the irq might 7089 * enqueue unpin/hotplug work. */ 7090 drm_irq_uninstall(dev); 7091 7092 if (taskqueue_cancel(dev_priv->tq, &dev_priv->hotplug_task, NULL)) 7093 taskqueue_drain(dev_priv->tq, &dev_priv->hotplug_task); 7094 if (taskqueue_cancel(dev_priv->tq, &dev_priv->rps_task, NULL)) 7095 taskqueue_drain(dev_priv->tq, &dev_priv->rps_task); 7096 7097 /* Shut off idle work before the crtcs get freed. */ 7098 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { 7099 intel_crtc = to_intel_crtc(crtc); 7100 callout_drain(&intel_crtc->idle_callout); 7101 } 7102 callout_drain(&dev_priv->idle_callout); 7103 if (taskqueue_cancel(dev_priv->tq, &dev_priv->idle_task, NULL)) 7104 taskqueue_drain(dev_priv->tq, &dev_priv->idle_task); 7105 7106 drm_mode_config_cleanup(dev); 7107} 7108 7109/* 7110 * Return which encoder is currently attached for connector. 7111 */ 7112struct drm_encoder *intel_best_encoder(struct drm_connector *connector) 7113{ 7114 return &intel_attached_encoder(connector)->base; 7115} 7116 7117void intel_connector_attach_encoder(struct intel_connector *connector, 7118 struct intel_encoder *encoder) 7119{ 7120 connector->encoder = encoder; 7121 drm_mode_connector_attach_encoder(&connector->base, 7122 &encoder->base); 7123} 7124 7125/* 7126 * set vga decode state - true == enable VGA decode 7127 */ 7128int intel_modeset_vga_set_state(struct drm_device *dev, bool state) 7129{ 7130 struct drm_i915_private *dev_priv; 7131 device_t bridge_dev; 7132 u16 gmch_ctrl; 7133 7134 dev_priv = dev->dev_private; 7135 bridge_dev = intel_gtt_get_bridge_device(); 7136 gmch_ctrl = pci_read_config(bridge_dev, INTEL_GMCH_CTRL, 2); 7137 if (state) 7138 gmch_ctrl &= ~INTEL_GMCH_VGA_DISABLE; 7139 else 7140 gmch_ctrl |= INTEL_GMCH_VGA_DISABLE; 7141 pci_write_config(bridge_dev, INTEL_GMCH_CTRL, gmch_ctrl, 2); 7142 return (0); 7143} 7144 7145struct intel_display_error_state { 7146 struct intel_cursor_error_state { 7147 u32 control; 7148 u32 position; 7149 u32 base; 7150 u32 size; 7151 } cursor[2]; 7152 7153 struct intel_pipe_error_state { 7154 u32 conf; 7155 u32 source; 7156 7157 u32 htotal; 7158 u32 hblank; 7159 u32 hsync; 7160 u32 vtotal; 7161 u32 vblank; 7162 u32 vsync; 7163 } pipe[2]; 7164 7165 struct intel_plane_error_state { 7166 u32 control; 7167 u32 stride; 7168 u32 size; 7169 u32 pos; 7170 u32 addr; 7171 u32 surface; 7172 u32 tile_offset; 7173 } plane[2]; 7174}; 7175 7176struct intel_display_error_state * 7177intel_display_capture_error_state(struct drm_device *dev) 7178{ 7179 drm_i915_private_t *dev_priv = dev->dev_private; 7180 struct intel_display_error_state *error; 7181 int i; 7182 7183 error = malloc(sizeof(*error), DRM_MEM_KMS, M_NOWAIT); 7184 if (error == NULL) 7185 return NULL; 7186 7187 for (i = 0; i < 2; i++) { 7188 error->cursor[i].control = I915_READ(CURCNTR(i)); 7189 error->cursor[i].position = I915_READ(CURPOS(i)); 7190 error->cursor[i].base = I915_READ(CURBASE(i)); 7191 7192 error->plane[i].control = I915_READ(DSPCNTR(i)); 7193 error->plane[i].stride = I915_READ(DSPSTRIDE(i)); 7194 error->plane[i].size = I915_READ(DSPSIZE(i)); 7195 error->plane[i].pos = I915_READ(DSPPOS(i)); 7196 error->plane[i].addr = I915_READ(DSPADDR(i)); 7197 if (INTEL_INFO(dev)->gen >= 4) { 7198 error->plane[i].surface = I915_READ(DSPSURF(i)); 7199 error->plane[i].tile_offset = I915_READ(DSPTILEOFF(i)); 7200 } 7201 7202 error->pipe[i].conf = I915_READ(PIPECONF(i)); 7203 error->pipe[i].source = I915_READ(PIPESRC(i)); 7204 error->pipe[i].htotal = I915_READ(HTOTAL(i)); 7205 error->pipe[i].hblank = I915_READ(HBLANK(i)); 7206 error->pipe[i].hsync = I915_READ(HSYNC(i)); 7207 error->pipe[i].vtotal = I915_READ(VTOTAL(i)); 7208 error->pipe[i].vblank = I915_READ(VBLANK(i)); 7209 error->pipe[i].vsync = I915_READ(VSYNC(i)); 7210 } 7211 7212 return error; 7213} 7214 7215void 7216intel_display_print_error_state(struct sbuf *m, 7217 struct drm_device *dev, 7218 struct intel_display_error_state *error) 7219{ 7220 int i; 7221 7222 for (i = 0; i < 2; i++) { 7223 sbuf_printf(m, "Pipe [%d]:\n", i); 7224 sbuf_printf(m, " CONF: %08x\n", error->pipe[i].conf); 7225 sbuf_printf(m, " SRC: %08x\n", error->pipe[i].source); 7226 sbuf_printf(m, " HTOTAL: %08x\n", error->pipe[i].htotal); 7227 sbuf_printf(m, " HBLANK: %08x\n", error->pipe[i].hblank); 7228 sbuf_printf(m, " HSYNC: %08x\n", error->pipe[i].hsync); 7229 sbuf_printf(m, " VTOTAL: %08x\n", error->pipe[i].vtotal); 7230 sbuf_printf(m, " VBLANK: %08x\n", error->pipe[i].vblank); 7231 sbuf_printf(m, " VSYNC: %08x\n", error->pipe[i].vsync); 7232 7233 sbuf_printf(m, "Plane [%d]:\n", i); 7234 sbuf_printf(m, " CNTR: %08x\n", error->plane[i].control); 7235 sbuf_printf(m, " STRIDE: %08x\n", error->plane[i].stride); 7236 sbuf_printf(m, " SIZE: %08x\n", error->plane[i].size); 7237 sbuf_printf(m, " POS: %08x\n", error->plane[i].pos); 7238 sbuf_printf(m, " ADDR: %08x\n", error->plane[i].addr); 7239 if (INTEL_INFO(dev)->gen >= 4) { 7240 sbuf_printf(m, " SURF: %08x\n", error->plane[i].surface); 7241 sbuf_printf(m, " TILEOFF: %08x\n", error->plane[i].tile_offset); 7242 } 7243 7244 sbuf_printf(m, "Cursor [%d]:\n", i); 7245 sbuf_printf(m, " CNTR: %08x\n", error->cursor[i].control); 7246 sbuf_printf(m, " POS: %08x\n", error->cursor[i].position); 7247 sbuf_printf(m, " BASE: %08x\n", error->cursor[i].base); 7248 } 7249} 7250