ata-marvell.c revision 287016
1/*- 2 * Copyright (c) 1998 - 2008 S��ren Schmidt <sos@FreeBSD.org> 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer, 10 * without modification, immediately at the beginning of the file. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 16 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 18 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 19 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 20 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 21 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 22 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 23 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 24 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 25 */ 26 27#include <sys/cdefs.h> 28__FBSDID("$FreeBSD: stable/10/sys/dev/ata/chipsets/ata-marvell.c 287016 2015-08-22 07:32:47Z mav $"); 29 30#include <sys/param.h> 31#include <sys/module.h> 32#include <sys/systm.h> 33#include <sys/kernel.h> 34#include <sys/ata.h> 35#include <sys/bus.h> 36#include <sys/endian.h> 37#include <sys/malloc.h> 38#include <sys/lock.h> 39#include <sys/mutex.h> 40#include <sys/sema.h> 41#include <sys/taskqueue.h> 42#include <vm/uma.h> 43#include <machine/stdarg.h> 44#include <machine/resource.h> 45#include <machine/bus.h> 46#include <sys/rman.h> 47#include <dev/pci/pcivar.h> 48#include <dev/pci/pcireg.h> 49#include <dev/ata/ata-all.h> 50#include <dev/ata/ata-pci.h> 51#include <ata_if.h> 52 53/* local prototypes */ 54static int ata_marvell_chipinit(device_t dev); 55static int ata_marvell_ch_attach(device_t dev); 56static int ata_marvell_setmode(device_t dev, int target, int mode); 57static int ata_marvell_dummy_chipinit(device_t dev); 58 59/* misc defines */ 60#define MV_61XX 61 61#define MV_91XX 91 62 63/* 64 * Marvell chipset support functions 65 */ 66#define ATA_MV_HOST_BASE(ch) \ 67 ((ch->unit & 3) * 0x0100) + (ch->unit > 3 ? 0x30000 : 0x20000) 68#define ATA_MV_EDMA_BASE(ch) \ 69 ((ch->unit & 3) * 0x2000) + (ch->unit > 3 ? 0x30000 : 0x20000) 70 71struct ata_marvell_response { 72 u_int16_t tag; 73 u_int8_t edma_status; 74 u_int8_t dev_status; 75 u_int32_t timestamp; 76}; 77 78struct ata_marvell_dma_prdentry { 79 u_int32_t addrlo; 80 u_int32_t count; 81 u_int32_t addrhi; 82 u_int32_t reserved; 83}; 84 85static int 86ata_marvell_probe(device_t dev) 87{ 88 struct ata_pci_controller *ctlr = device_get_softc(dev); 89 static const struct ata_chip_id ids[] = 90 {{ ATA_M88SE6101, 0, 0, MV_61XX, ATA_UDMA6, "88SE6101" }, 91 { ATA_M88SE6102, 0, 0, MV_61XX, ATA_UDMA6, "88SE6102" }, 92 { ATA_M88SE6111, 0, 1, MV_61XX, ATA_UDMA6, "88SE6111" }, 93 { ATA_M88SE6121, 0, 2, MV_61XX, ATA_UDMA6, "88SE6121" }, 94 { ATA_M88SE6141, 0, 4, MV_61XX, ATA_UDMA6, "88SE6141" }, 95 { ATA_M88SE6145, 0, 4, MV_61XX, ATA_UDMA6, "88SE6145" }, 96 { 0x91a41b4b, 0, 0, MV_91XX, ATA_UDMA6, "88SE912x" }, 97 { 0, 0, 0, 0, 0, 0}}; 98 99 if (pci_get_vendor(dev) != ATA_MARVELL_ID && 100 pci_get_vendor(dev) != ATA_MARVELL2_ID) 101 return ENXIO; 102 103 if (!(ctlr->chip = ata_match_chip(dev, ids))) 104 return ENXIO; 105 106 ata_set_desc(dev); 107 108 switch (ctlr->chip->cfg2) { 109 case MV_61XX: 110 ctlr->chipinit = ata_marvell_chipinit; 111 break; 112 case MV_91XX: 113 ctlr->chipinit = ata_marvell_dummy_chipinit; 114 break; 115 } 116 return (BUS_PROBE_LOW_PRIORITY); 117} 118 119static int 120ata_marvell_chipinit(device_t dev) 121{ 122 struct ata_pci_controller *ctlr = device_get_softc(dev); 123 device_t child; 124 125 if (ata_setup_interrupt(dev, ata_generic_intr)) 126 return ENXIO; 127 /* Create AHCI subdevice if AHCI part present. */ 128 if (ctlr->chip->cfg1) { 129 child = device_add_child(dev, NULL, -1); 130 if (child != NULL) { 131 device_set_ivars(child, (void *)(intptr_t)-1); 132 bus_generic_attach(dev); 133 } 134 } 135 ctlr->ch_attach = ata_marvell_ch_attach; 136 ctlr->ch_detach = ata_pci_ch_detach; 137 ctlr->reset = ata_generic_reset; 138 ctlr->setmode = ata_marvell_setmode; 139 ctlr->channels = 1; 140 return (0); 141} 142 143static int 144ata_marvell_ch_attach(device_t dev) 145{ 146 struct ata_channel *ch = device_get_softc(dev); 147 int error; 148 149 error = ata_pci_ch_attach(dev); 150 /* dont use 32 bit PIO transfers */ 151 ch->flags |= ATA_USE_16BIT; 152 ch->flags |= ATA_CHECKS_CABLE; 153 return (error); 154} 155 156static int 157ata_marvell_setmode(device_t dev, int target, int mode) 158{ 159 struct ata_pci_controller *ctlr = device_get_softc(device_get_parent(dev)); 160 struct ata_channel *ch = device_get_softc(dev); 161 162 mode = min(mode, ctlr->chip->max_dma); 163 /* Check for 80pin cable present. */ 164 if (ata_dma_check_80pin && mode > ATA_UDMA2 && 165 ATA_IDX_INB(ch, ATA_BMDEVSPEC_0) & 0x01) { 166 ata_print_cable(dev, "controller"); 167 mode = ATA_UDMA2; 168 } 169 /* Nothing to do to setup mode, the controller snoop SET_FEATURE cmd. */ 170 return (mode); 171} 172 173static int 174ata_marvell_dummy_chipinit(device_t dev) 175{ 176 struct ata_pci_controller *ctlr = device_get_softc(dev); 177 178 ctlr->channels = 0; 179 return (0); 180} 181 182ATA_DECLARE_DRIVER(ata_marvell); 183