acconfig.h revision 281075
1/****************************************************************************** 2 * 3 * Name: acconfig.h - Global configuration constants 4 * 5 *****************************************************************************/ 6 7/* 8 * Copyright (C) 2000 - 2015, Intel Corp. 9 * All rights reserved. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions, and the following disclaimer, 16 * without modification. 17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 18 * substantially similar to the "NO WARRANTY" disclaimer below 19 * ("Disclaimer") and any redistribution must be conditioned upon 20 * including a substantially similar Disclaimer requirement for further 21 * binary redistribution. 22 * 3. Neither the names of the above-listed copyright holders nor the names 23 * of any contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * Alternatively, this software may be distributed under the terms of the 27 * GNU General Public License ("GPL") version 2 as published by the Free 28 * Software Foundation. 29 * 30 * NO WARRANTY 31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 41 * POSSIBILITY OF SUCH DAMAGES. 42 */ 43 44#ifndef _ACCONFIG_H 45#define _ACCONFIG_H 46 47 48/****************************************************************************** 49 * 50 * Configuration options 51 * 52 *****************************************************************************/ 53 54/* 55 * ACPI_DEBUG_OUTPUT - This switch enables all the debug facilities of the 56 * ACPI subsystem. This includes the DEBUG_PRINT output 57 * statements. When disabled, all DEBUG_PRINT 58 * statements are compiled out. 59 * 60 * ACPI_APPLICATION - Use this switch if the subsystem is going to be run 61 * at the application level. 62 * 63 */ 64 65/* 66 * OS name, used for the _OS object. The _OS object is essentially obsolete, 67 * but there is a large base of ASL/AML code in existing machines that check 68 * for the string below. The use of this string usually guarantees that 69 * the ASL will execute down the most tested code path. Also, there is some 70 * code that will not execute the _OSI method unless _OS matches the string 71 * below. Therefore, change this string at your own risk. 72 */ 73#define ACPI_OS_NAME "Microsoft Windows NT" 74 75/* Maximum objects in the various object caches */ 76 77#define ACPI_MAX_STATE_CACHE_DEPTH 96 /* State objects */ 78#define ACPI_MAX_PARSE_CACHE_DEPTH 96 /* Parse tree objects */ 79#define ACPI_MAX_EXTPARSE_CACHE_DEPTH 96 /* Parse tree objects */ 80#define ACPI_MAX_OBJECT_CACHE_DEPTH 96 /* Interpreter operand objects */ 81#define ACPI_MAX_NAMESPACE_CACHE_DEPTH 96 /* Namespace objects */ 82 83/* 84 * Should the subsystem abort the loading of an ACPI table if the 85 * table checksum is incorrect? 86 */ 87#ifndef ACPI_CHECKSUM_ABORT 88#define ACPI_CHECKSUM_ABORT FALSE 89#endif 90 91/* 92 * Generate a version of ACPICA that only supports "reduced hardware" 93 * platforms (as defined in ACPI 5.0). Set to TRUE to generate a specialized 94 * version of ACPICA that ONLY supports the ACPI 5.0 "reduced hardware" 95 * model. In other words, no ACPI hardware is supported. 96 * 97 * If TRUE, this means no support for the following: 98 * PM Event and Control registers 99 * SCI interrupt (and handler) 100 * Fixed Events 101 * General Purpose Events (GPEs) 102 * Global Lock 103 * ACPI PM timer 104 * FACS table (Waking vectors and Global Lock) 105 */ 106#ifndef ACPI_REDUCED_HARDWARE 107#define ACPI_REDUCED_HARDWARE FALSE 108#endif 109 110 111/****************************************************************************** 112 * 113 * Subsystem Constants 114 * 115 *****************************************************************************/ 116 117/* Version of ACPI supported */ 118 119#define ACPI_CA_SUPPORT_LEVEL 5 120 121/* Maximum count for a semaphore object */ 122 123#define ACPI_MAX_SEMAPHORE_COUNT 256 124 125/* Maximum object reference count (detects object deletion issues) */ 126 127#define ACPI_MAX_REFERENCE_COUNT 0x800 128 129/* Default page size for use in mapping memory for operation regions */ 130 131#define ACPI_DEFAULT_PAGE_SIZE 4096 /* Must be power of 2 */ 132 133/* OwnerId tracking. 8 entries allows for 255 OwnerIds */ 134 135#define ACPI_NUM_OWNERID_MASKS 8 136 137/* Size of the root table array is increased by this increment */ 138 139#define ACPI_ROOT_TABLE_SIZE_INCREMENT 4 140 141/* Maximum number of While() loop iterations before forced abort */ 142 143#define ACPI_MAX_LOOP_ITERATIONS 0xFFFF 144 145/* Maximum sleep allowed via Sleep() operator */ 146 147#define ACPI_MAX_SLEEP 2000 /* 2000 millisec == two seconds */ 148 149/* Address Range lists are per-SpaceId (Memory and I/O only) */ 150 151#define ACPI_ADDRESS_RANGE_MAX 2 152 153 154/****************************************************************************** 155 * 156 * ACPI Specification constants (Do not change unless the specification changes) 157 * 158 *****************************************************************************/ 159 160/* Method info (in WALK_STATE), containing local variables and argumetns */ 161 162#define ACPI_METHOD_NUM_LOCALS 8 163#define ACPI_METHOD_MAX_LOCAL 7 164 165#define ACPI_METHOD_NUM_ARGS 7 166#define ACPI_METHOD_MAX_ARG 6 167 168/* 169 * Operand Stack (in WALK_STATE), Must be large enough to contain METHOD_MAX_ARG 170 */ 171#define ACPI_OBJ_NUM_OPERANDS 8 172#define ACPI_OBJ_MAX_OPERAND 7 173 174/* Number of elements in the Result Stack frame, can be an arbitrary value */ 175 176#define ACPI_RESULTS_FRAME_OBJ_NUM 8 177 178/* 179 * Maximal number of elements the Result Stack can contain, 180 * it may be an arbitray value not exceeding the types of 181 * ResultSize and ResultCount (now UINT8). 182 */ 183#define ACPI_RESULTS_OBJ_NUM_MAX 255 184 185/* Constants used in searching for the RSDP in low memory */ 186 187#define ACPI_EBDA_PTR_LOCATION 0x0000040E /* Physical Address */ 188#define ACPI_EBDA_PTR_LENGTH 2 189#define ACPI_EBDA_WINDOW_SIZE 1024 190#define ACPI_HI_RSDP_WINDOW_BASE 0x000E0000 /* Physical Address */ 191#define ACPI_HI_RSDP_WINDOW_SIZE 0x00020000 192#define ACPI_RSDP_SCAN_STEP 16 193 194/* Operation regions */ 195 196#define ACPI_USER_REGION_BEGIN 0x80 197 198/* Maximum SpaceIds for Operation Regions */ 199 200#define ACPI_MAX_ADDRESS_SPACE 255 201#define ACPI_NUM_DEFAULT_SPACES 4 202 203/* Array sizes. Used for range checking also */ 204 205#define ACPI_MAX_MATCH_OPCODE 5 206 207/* RSDP checksums */ 208 209#define ACPI_RSDP_CHECKSUM_LENGTH 20 210#define ACPI_RSDP_XCHECKSUM_LENGTH 36 211 212/* SMBus, GSBus and IPMI bidirectional buffer size */ 213 214#define ACPI_SMBUS_BUFFER_SIZE 34 215#define ACPI_GSBUS_BUFFER_SIZE 34 216#define ACPI_IPMI_BUFFER_SIZE 66 217 218/* _SxD and _SxW control methods */ 219 220#define ACPI_NUM_SxD_METHODS 4 221#define ACPI_NUM_SxW_METHODS 5 222 223 224/****************************************************************************** 225 * 226 * Miscellaneous constants 227 * 228 *****************************************************************************/ 229 230/* UUID constants */ 231 232#define UUID_BUFFER_LENGTH 16 /* Length of UUID in memory */ 233#define UUID_STRING_LENGTH 36 /* Total length of a UUID string */ 234 235/* Positions for required hyphens (dashes) in UUID strings */ 236 237#define UUID_HYPHEN1_OFFSET 8 238#define UUID_HYPHEN2_OFFSET 13 239#define UUID_HYPHEN3_OFFSET 18 240#define UUID_HYPHEN4_OFFSET 23 241 242 243/****************************************************************************** 244 * 245 * ACPI AML Debugger 246 * 247 *****************************************************************************/ 248 249#define ACPI_DEBUGGER_MAX_ARGS ACPI_METHOD_NUM_ARGS + 4 /* Max command line arguments */ 250#define ACPI_DB_LINE_BUFFER_SIZE 512 251 252#define ACPI_DEBUGGER_COMMAND_PROMPT '-' 253#define ACPI_DEBUGGER_EXECUTE_PROMPT '%' 254 255 256#endif /* _ACCONFIG_H */ 257