sa.c revision 297112
1/*
2 * CDDL HEADER START
3 *
4 * The contents of this file are subject to the terms of the
5 * Common Development and Distribution License (the "License").
6 * You may not use this file except in compliance with the License.
7 *
8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9 * or http://www.opensolaris.org/os/licensing.
10 * See the License for the specific language governing permissions
11 * and limitations under the License.
12 *
13 * When distributing Covered Code, include this CDDL HEADER in each
14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15 * If applicable, add the following below this CDDL HEADER, with the
16 * fields enclosed by brackets "[]" replaced with your own identifying
17 * information: Portions Copyright [yyyy] [name of copyright owner]
18 *
19 * CDDL HEADER END
20 */
21
22/*
23 * Copyright (c) 2010, Oracle and/or its affiliates. All rights reserved.
24 * Portions Copyright 2011 iXsystems, Inc
25 * Copyright (c) 2013 by Delphix. All rights reserved.
26 * Copyright (c) 2014 Spectra Logic Corporation, All rights reserved.
27 * Copyright (c) 2014 Integros [integros.com]
28 */
29
30#include <sys/zfs_context.h>
31#include <sys/types.h>
32#include <sys/param.h>
33#include <sys/systm.h>
34#include <sys/sysmacros.h>
35#include <sys/dmu.h>
36#include <sys/dmu_impl.h>
37#include <sys/dmu_objset.h>
38#include <sys/dbuf.h>
39#include <sys/dnode.h>
40#include <sys/zap.h>
41#include <sys/sa.h>
42#include <sys/sunddi.h>
43#include <sys/sa_impl.h>
44#include <sys/dnode.h>
45#include <sys/errno.h>
46#include <sys/zfs_context.h>
47
48/*
49 * ZFS System attributes:
50 *
51 * A generic mechanism to allow for arbitrary attributes
52 * to be stored in a dnode.  The data will be stored in the bonus buffer of
53 * the dnode and if necessary a special "spill" block will be used to handle
54 * overflow situations.  The spill block will be sized to fit the data
55 * from 512 - 128K.  When a spill block is used the BP (blkptr_t) for the
56 * spill block is stored at the end of the current bonus buffer.  Any
57 * attributes that would be in the way of the blkptr_t will be relocated
58 * into the spill block.
59 *
60 * Attribute registration:
61 *
62 * Stored persistently on a per dataset basis
63 * a mapping between attribute "string" names and their actual attribute
64 * numeric values, length, and byteswap function.  The names are only used
65 * during registration.  All  attributes are known by their unique attribute
66 * id value.  If an attribute can have a variable size then the value
67 * 0 will be used to indicate this.
68 *
69 * Attribute Layout:
70 *
71 * Attribute layouts are a way to compactly store multiple attributes, but
72 * without taking the overhead associated with managing each attribute
73 * individually.  Since you will typically have the same set of attributes
74 * stored in the same order a single table will be used to represent that
75 * layout.  The ZPL for example will usually have only about 10 different
76 * layouts (regular files, device files, symlinks,
77 * regular files + scanstamp, files/dir with extended attributes, and then
78 * you have the possibility of all of those minus ACL, because it would
79 * be kicked out into the spill block)
80 *
81 * Layouts are simply an array of the attributes and their
82 * ordering i.e. [0, 1, 4, 5, 2]
83 *
84 * Each distinct layout is given a unique layout number and that is whats
85 * stored in the header at the beginning of the SA data buffer.
86 *
87 * A layout only covers a single dbuf (bonus or spill).  If a set of
88 * attributes is split up between the bonus buffer and a spill buffer then
89 * two different layouts will be used.  This allows us to byteswap the
90 * spill without looking at the bonus buffer and keeps the on disk format of
91 * the bonus and spill buffer the same.
92 *
93 * Adding a single attribute will cause the entire set of attributes to
94 * be rewritten and could result in a new layout number being constructed
95 * as part of the rewrite if no such layout exists for the new set of
96 * attribues.  The new attribute will be appended to the end of the already
97 * existing attributes.
98 *
99 * Both the attribute registration and attribute layout information are
100 * stored in normal ZAP attributes.  Their should be a small number of
101 * known layouts and the set of attributes is assumed to typically be quite
102 * small.
103 *
104 * The registered attributes and layout "table" information is maintained
105 * in core and a special "sa_os_t" is attached to the objset_t.
106 *
107 * A special interface is provided to allow for quickly applying
108 * a large set of attributes at once.  sa_replace_all_by_template() is
109 * used to set an array of attributes.  This is used by the ZPL when
110 * creating a brand new file.  The template that is passed into the function
111 * specifies the attribute, size for variable length attributes, location of
112 * data and special "data locator" function if the data isn't in a contiguous
113 * location.
114 *
115 * Byteswap implications:
116 *
117 * Since the SA attributes are not entirely self describing we can't do
118 * the normal byteswap processing.  The special ZAP layout attribute and
119 * attribute registration attributes define the byteswap function and the
120 * size of the attributes, unless it is variable sized.
121 * The normal ZFS byteswapping infrastructure assumes you don't need
122 * to read any objects in order to do the necessary byteswapping.  Whereas
123 * SA attributes can only be properly byteswapped if the dataset is opened
124 * and the layout/attribute ZAP attributes are available.  Because of this
125 * the SA attributes will be byteswapped when they are first accessed by
126 * the SA code that will read the SA data.
127 */
128
129typedef void (sa_iterfunc_t)(void *hdr, void *addr, sa_attr_type_t,
130    uint16_t length, int length_idx, boolean_t, void *userp);
131
132static int sa_build_index(sa_handle_t *hdl, sa_buf_type_t buftype);
133static void sa_idx_tab_hold(objset_t *os, sa_idx_tab_t *idx_tab);
134static void *sa_find_idx_tab(objset_t *os, dmu_object_type_t bonustype,
135    void *data);
136static void sa_idx_tab_rele(objset_t *os, void *arg);
137static void sa_copy_data(sa_data_locator_t *func, void *start, void *target,
138    int buflen);
139static int sa_modify_attrs(sa_handle_t *hdl, sa_attr_type_t newattr,
140    sa_data_op_t action, sa_data_locator_t *locator, void *datastart,
141    uint16_t buflen, dmu_tx_t *tx);
142
143arc_byteswap_func_t *sa_bswap_table[] = {
144	byteswap_uint64_array,
145	byteswap_uint32_array,
146	byteswap_uint16_array,
147	byteswap_uint8_array,
148	zfs_acl_byteswap,
149};
150
151#define	SA_COPY_DATA(f, s, t, l) \
152	{ \
153		if (f == NULL) { \
154			if (l == 8) { \
155				*(uint64_t *)t = *(uint64_t *)s; \
156			} else if (l == 16) { \
157				*(uint64_t *)t = *(uint64_t *)s; \
158				*(uint64_t *)((uintptr_t)t + 8) = \
159				    *(uint64_t *)((uintptr_t)s + 8); \
160			} else { \
161				bcopy(s, t, l); \
162			} \
163		} else \
164			sa_copy_data(f, s, t, l); \
165	}
166
167/*
168 * This table is fixed and cannot be changed.  Its purpose is to
169 * allow the SA code to work with both old/new ZPL file systems.
170 * It contains the list of legacy attributes.  These attributes aren't
171 * stored in the "attribute" registry zap objects, since older ZPL file systems
172 * won't have the registry.  Only objsets of type ZFS_TYPE_FILESYSTEM will
173 * use this static table.
174 */
175sa_attr_reg_t sa_legacy_attrs[] = {
176	{"ZPL_ATIME", sizeof (uint64_t) * 2, SA_UINT64_ARRAY, 0},
177	{"ZPL_MTIME", sizeof (uint64_t) * 2, SA_UINT64_ARRAY, 1},
178	{"ZPL_CTIME", sizeof (uint64_t) * 2, SA_UINT64_ARRAY, 2},
179	{"ZPL_CRTIME", sizeof (uint64_t) * 2, SA_UINT64_ARRAY, 3},
180	{"ZPL_GEN", sizeof (uint64_t), SA_UINT64_ARRAY, 4},
181	{"ZPL_MODE", sizeof (uint64_t), SA_UINT64_ARRAY, 5},
182	{"ZPL_SIZE", sizeof (uint64_t), SA_UINT64_ARRAY, 6},
183	{"ZPL_PARENT", sizeof (uint64_t), SA_UINT64_ARRAY, 7},
184	{"ZPL_LINKS", sizeof (uint64_t), SA_UINT64_ARRAY, 8},
185	{"ZPL_XATTR", sizeof (uint64_t), SA_UINT64_ARRAY, 9},
186	{"ZPL_RDEV", sizeof (uint64_t), SA_UINT64_ARRAY, 10},
187	{"ZPL_FLAGS", sizeof (uint64_t), SA_UINT64_ARRAY, 11},
188	{"ZPL_UID", sizeof (uint64_t), SA_UINT64_ARRAY, 12},
189	{"ZPL_GID", sizeof (uint64_t), SA_UINT64_ARRAY, 13},
190	{"ZPL_PAD", sizeof (uint64_t) * 4, SA_UINT64_ARRAY, 14},
191	{"ZPL_ZNODE_ACL", 88, SA_UINT8_ARRAY, 15},
192};
193
194/*
195 * This is only used for objects of type DMU_OT_ZNODE
196 */
197sa_attr_type_t sa_legacy_zpl_layout[] = {
198    0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15
199};
200
201/*
202 * Special dummy layout used for buffers with no attributes.
203 */
204sa_attr_type_t sa_dummy_zpl_layout[] = { 0 };
205
206static int sa_legacy_attr_count = 16;
207static kmem_cache_t *sa_cache = NULL;
208
209/*ARGSUSED*/
210static int
211sa_cache_constructor(void *buf, void *unused, int kmflag)
212{
213	sa_handle_t *hdl = buf;
214
215	mutex_init(&hdl->sa_lock, NULL, MUTEX_DEFAULT, NULL);
216	return (0);
217}
218
219/*ARGSUSED*/
220static void
221sa_cache_destructor(void *buf, void *unused)
222{
223	sa_handle_t *hdl = buf;
224	mutex_destroy(&hdl->sa_lock);
225}
226
227void
228sa_cache_init(void)
229{
230	sa_cache = kmem_cache_create("sa_cache",
231	    sizeof (sa_handle_t), 0, sa_cache_constructor,
232	    sa_cache_destructor, NULL, NULL, NULL, 0);
233}
234
235void
236sa_cache_fini(void)
237{
238	if (sa_cache)
239		kmem_cache_destroy(sa_cache);
240}
241
242static int
243layout_num_compare(const void *arg1, const void *arg2)
244{
245	const sa_lot_t *node1 = arg1;
246	const sa_lot_t *node2 = arg2;
247
248	if (node1->lot_num > node2->lot_num)
249		return (1);
250	else if (node1->lot_num < node2->lot_num)
251		return (-1);
252	return (0);
253}
254
255static int
256layout_hash_compare(const void *arg1, const void *arg2)
257{
258	const sa_lot_t *node1 = arg1;
259	const sa_lot_t *node2 = arg2;
260
261	if (node1->lot_hash > node2->lot_hash)
262		return (1);
263	if (node1->lot_hash < node2->lot_hash)
264		return (-1);
265	if (node1->lot_instance > node2->lot_instance)
266		return (1);
267	if (node1->lot_instance < node2->lot_instance)
268		return (-1);
269	return (0);
270}
271
272boolean_t
273sa_layout_equal(sa_lot_t *tbf, sa_attr_type_t *attrs, int count)
274{
275	int i;
276
277	if (count != tbf->lot_attr_count)
278		return (1);
279
280	for (i = 0; i != count; i++) {
281		if (attrs[i] != tbf->lot_attrs[i])
282			return (1);
283	}
284	return (0);
285}
286
287#define	SA_ATTR_HASH(attr) (zfs_crc64_table[(-1ULL ^ attr) & 0xFF])
288
289static uint64_t
290sa_layout_info_hash(sa_attr_type_t *attrs, int attr_count)
291{
292	int i;
293	uint64_t crc = -1ULL;
294
295	for (i = 0; i != attr_count; i++)
296		crc ^= SA_ATTR_HASH(attrs[i]);
297
298	return (crc);
299}
300
301static int
302sa_get_spill(sa_handle_t *hdl)
303{
304	int rc;
305	if (hdl->sa_spill == NULL) {
306		if ((rc = dmu_spill_hold_existing(hdl->sa_bonus, NULL,
307		    &hdl->sa_spill)) == 0)
308			VERIFY(0 == sa_build_index(hdl, SA_SPILL));
309	} else {
310		rc = 0;
311	}
312
313	return (rc);
314}
315
316/*
317 * Main attribute lookup/update function
318 * returns 0 for success or non zero for failures
319 *
320 * Operates on bulk array, first failure will abort further processing
321 */
322int
323sa_attr_op(sa_handle_t *hdl, sa_bulk_attr_t *bulk, int count,
324    sa_data_op_t data_op, dmu_tx_t *tx)
325{
326	sa_os_t *sa = hdl->sa_os->os_sa;
327	int i;
328	int error = 0;
329	sa_buf_type_t buftypes;
330
331	buftypes = 0;
332
333	ASSERT(count > 0);
334	for (i = 0; i != count; i++) {
335		ASSERT(bulk[i].sa_attr <= hdl->sa_os->os_sa->sa_num_attrs);
336
337		bulk[i].sa_addr = NULL;
338		/* First check the bonus buffer */
339
340		if (hdl->sa_bonus_tab && TOC_ATTR_PRESENT(
341		    hdl->sa_bonus_tab->sa_idx_tab[bulk[i].sa_attr])) {
342			SA_ATTR_INFO(sa, hdl->sa_bonus_tab,
343			    SA_GET_HDR(hdl, SA_BONUS),
344			    bulk[i].sa_attr, bulk[i], SA_BONUS, hdl);
345			if (tx && !(buftypes & SA_BONUS)) {
346				dmu_buf_will_dirty(hdl->sa_bonus, tx);
347				buftypes |= SA_BONUS;
348			}
349		}
350		if (bulk[i].sa_addr == NULL &&
351		    ((error = sa_get_spill(hdl)) == 0)) {
352			if (TOC_ATTR_PRESENT(
353			    hdl->sa_spill_tab->sa_idx_tab[bulk[i].sa_attr])) {
354				SA_ATTR_INFO(sa, hdl->sa_spill_tab,
355				    SA_GET_HDR(hdl, SA_SPILL),
356				    bulk[i].sa_attr, bulk[i], SA_SPILL, hdl);
357				if (tx && !(buftypes & SA_SPILL) &&
358				    bulk[i].sa_size == bulk[i].sa_length) {
359					dmu_buf_will_dirty(hdl->sa_spill, tx);
360					buftypes |= SA_SPILL;
361				}
362			}
363		}
364		if (error && error != ENOENT) {
365			return ((error == ECKSUM) ? EIO : error);
366		}
367
368		switch (data_op) {
369		case SA_LOOKUP:
370			if (bulk[i].sa_addr == NULL)
371				return (SET_ERROR(ENOENT));
372			if (bulk[i].sa_data) {
373				SA_COPY_DATA(bulk[i].sa_data_func,
374				    bulk[i].sa_addr, bulk[i].sa_data,
375				    bulk[i].sa_size);
376			}
377			continue;
378
379		case SA_UPDATE:
380			/* existing rewrite of attr */
381			if (bulk[i].sa_addr &&
382			    bulk[i].sa_size == bulk[i].sa_length) {
383				SA_COPY_DATA(bulk[i].sa_data_func,
384				    bulk[i].sa_data, bulk[i].sa_addr,
385				    bulk[i].sa_length);
386				continue;
387			} else if (bulk[i].sa_addr) { /* attr size change */
388				error = sa_modify_attrs(hdl, bulk[i].sa_attr,
389				    SA_REPLACE, bulk[i].sa_data_func,
390				    bulk[i].sa_data, bulk[i].sa_length, tx);
391			} else { /* adding new attribute */
392				error = sa_modify_attrs(hdl, bulk[i].sa_attr,
393				    SA_ADD, bulk[i].sa_data_func,
394				    bulk[i].sa_data, bulk[i].sa_length, tx);
395			}
396			if (error)
397				return (error);
398			break;
399		}
400	}
401	return (error);
402}
403
404static sa_lot_t *
405sa_add_layout_entry(objset_t *os, sa_attr_type_t *attrs, int attr_count,
406    uint64_t lot_num, uint64_t hash, boolean_t zapadd, dmu_tx_t *tx)
407{
408	sa_os_t *sa = os->os_sa;
409	sa_lot_t *tb, *findtb;
410	int i;
411	avl_index_t loc;
412
413	ASSERT(MUTEX_HELD(&sa->sa_lock));
414	tb = kmem_zalloc(sizeof (sa_lot_t), KM_SLEEP);
415	tb->lot_attr_count = attr_count;
416	tb->lot_attrs = kmem_alloc(sizeof (sa_attr_type_t) * attr_count,
417	    KM_SLEEP);
418	bcopy(attrs, tb->lot_attrs, sizeof (sa_attr_type_t) * attr_count);
419	tb->lot_num = lot_num;
420	tb->lot_hash = hash;
421	tb->lot_instance = 0;
422
423	if (zapadd) {
424		char attr_name[8];
425
426		if (sa->sa_layout_attr_obj == 0) {
427			sa->sa_layout_attr_obj = zap_create_link(os,
428			    DMU_OT_SA_ATTR_LAYOUTS,
429			    sa->sa_master_obj, SA_LAYOUTS, tx);
430		}
431
432		(void) snprintf(attr_name, sizeof (attr_name),
433		    "%d", (int)lot_num);
434		VERIFY(0 == zap_update(os, os->os_sa->sa_layout_attr_obj,
435		    attr_name, 2, attr_count, attrs, tx));
436	}
437
438	list_create(&tb->lot_idx_tab, sizeof (sa_idx_tab_t),
439	    offsetof(sa_idx_tab_t, sa_next));
440
441	for (i = 0; i != attr_count; i++) {
442		if (sa->sa_attr_table[tb->lot_attrs[i]].sa_length == 0)
443			tb->lot_var_sizes++;
444	}
445
446	avl_add(&sa->sa_layout_num_tree, tb);
447
448	/* verify we don't have a hash collision */
449	if ((findtb = avl_find(&sa->sa_layout_hash_tree, tb, &loc)) != NULL) {
450		for (; findtb && findtb->lot_hash == hash;
451		    findtb = AVL_NEXT(&sa->sa_layout_hash_tree, findtb)) {
452			if (findtb->lot_instance != tb->lot_instance)
453				break;
454			tb->lot_instance++;
455		}
456	}
457	avl_add(&sa->sa_layout_hash_tree, tb);
458	return (tb);
459}
460
461static void
462sa_find_layout(objset_t *os, uint64_t hash, sa_attr_type_t *attrs,
463    int count, dmu_tx_t *tx, sa_lot_t **lot)
464{
465	sa_lot_t *tb, tbsearch;
466	avl_index_t loc;
467	sa_os_t *sa = os->os_sa;
468	boolean_t found = B_FALSE;
469
470	mutex_enter(&sa->sa_lock);
471	tbsearch.lot_hash = hash;
472	tbsearch.lot_instance = 0;
473	tb = avl_find(&sa->sa_layout_hash_tree, &tbsearch, &loc);
474	if (tb) {
475		for (; tb && tb->lot_hash == hash;
476		    tb = AVL_NEXT(&sa->sa_layout_hash_tree, tb)) {
477			if (sa_layout_equal(tb, attrs, count) == 0) {
478				found = B_TRUE;
479				break;
480			}
481		}
482	}
483	if (!found) {
484		tb = sa_add_layout_entry(os, attrs, count,
485		    avl_numnodes(&sa->sa_layout_num_tree), hash, B_TRUE, tx);
486	}
487	mutex_exit(&sa->sa_lock);
488	*lot = tb;
489}
490
491static int
492sa_resize_spill(sa_handle_t *hdl, uint32_t size, dmu_tx_t *tx)
493{
494	int error;
495	uint32_t blocksize;
496
497	if (size == 0) {
498		blocksize = SPA_MINBLOCKSIZE;
499	} else if (size > SPA_OLD_MAXBLOCKSIZE) {
500		ASSERT(0);
501		return (SET_ERROR(EFBIG));
502	} else {
503		blocksize = P2ROUNDUP_TYPED(size, SPA_MINBLOCKSIZE, uint32_t);
504	}
505
506	error = dbuf_spill_set_blksz(hdl->sa_spill, blocksize, tx);
507	ASSERT(error == 0);
508	return (error);
509}
510
511static void
512sa_copy_data(sa_data_locator_t *func, void *datastart, void *target, int buflen)
513{
514	if (func == NULL) {
515		bcopy(datastart, target, buflen);
516	} else {
517		boolean_t start;
518		int bytes;
519		void *dataptr;
520		void *saptr = target;
521		uint32_t length;
522
523		start = B_TRUE;
524		bytes = 0;
525		while (bytes < buflen) {
526			func(&dataptr, &length, buflen, start, datastart);
527			bcopy(dataptr, saptr, length);
528			saptr = (void *)((caddr_t)saptr + length);
529			bytes += length;
530			start = B_FALSE;
531		}
532	}
533}
534
535/*
536 * Determine several different sizes
537 * first the sa header size
538 * the number of bytes to be stored
539 * if spill would occur the index in the attribute array is returned
540 *
541 * the boolean will_spill will be set when spilling is necessary.  It
542 * is only set when the buftype is SA_BONUS
543 */
544static int
545sa_find_sizes(sa_os_t *sa, sa_bulk_attr_t *attr_desc, int attr_count,
546    dmu_buf_t *db, sa_buf_type_t buftype, int *index, int *total,
547    boolean_t *will_spill)
548{
549	int var_size = 0;
550	int i;
551	int full_space;
552	int hdrsize;
553	int extra_hdrsize;
554
555	if (buftype == SA_BONUS && sa->sa_force_spill) {
556		*total = 0;
557		*index = 0;
558		*will_spill = B_TRUE;
559		return (0);
560	}
561
562	*index = -1;
563	*total = 0;
564	*will_spill = B_FALSE;
565
566	extra_hdrsize = 0;
567	hdrsize = (SA_BONUSTYPE_FROM_DB(db) == DMU_OT_ZNODE) ? 0 :
568	    sizeof (sa_hdr_phys_t);
569
570	full_space = (buftype == SA_BONUS) ? DN_MAX_BONUSLEN : db->db_size;
571	ASSERT(IS_P2ALIGNED(full_space, 8));
572
573	for (i = 0; i != attr_count; i++) {
574		boolean_t is_var_sz;
575
576		*total = P2ROUNDUP(*total, 8);
577		*total += attr_desc[i].sa_length;
578		if (*will_spill)
579			continue;
580
581		is_var_sz = (SA_REGISTERED_LEN(sa, attr_desc[i].sa_attr) == 0);
582		if (is_var_sz) {
583			var_size++;
584		}
585
586		if (is_var_sz && var_size > 1) {
587			/*
588			 * Don't worry that the spill block might overflow.
589			 * It will be resized if needed in sa_build_layouts().
590			 */
591			if (buftype == SA_SPILL ||
592			    P2ROUNDUP(hdrsize + sizeof (uint16_t), 8) +
593			    *total < full_space) {
594				/*
595				 * Account for header space used by array of
596				 * optional sizes of variable-length attributes.
597				 * Record the extra header size in case this
598				 * increase needs to be reversed due to
599				 * spill-over.
600				 */
601				hdrsize += sizeof (uint16_t);
602				if (*index != -1)
603					extra_hdrsize += sizeof (uint16_t);
604			} else {
605				ASSERT(buftype == SA_BONUS);
606				if (*index == -1)
607					*index = i;
608				*will_spill = B_TRUE;
609				continue;
610			}
611		}
612
613		/*
614		 * find index of where spill *could* occur.
615		 * Then continue to count of remainder attribute
616		 * space.  The sum is used later for sizing bonus
617		 * and spill buffer.
618		 */
619		if (buftype == SA_BONUS && *index == -1 &&
620		    (*total + P2ROUNDUP(hdrsize, 8)) >
621		    (full_space - sizeof (blkptr_t))) {
622			*index = i;
623		}
624
625		if ((*total + P2ROUNDUP(hdrsize, 8)) > full_space &&
626		    buftype == SA_BONUS)
627			*will_spill = B_TRUE;
628	}
629
630	if (*will_spill)
631		hdrsize -= extra_hdrsize;
632
633	hdrsize = P2ROUNDUP(hdrsize, 8);
634	return (hdrsize);
635}
636
637#define	BUF_SPACE_NEEDED(total, header) (total + header)
638
639/*
640 * Find layout that corresponds to ordering of attributes
641 * If not found a new layout number is created and added to
642 * persistent layout tables.
643 */
644static int
645sa_build_layouts(sa_handle_t *hdl, sa_bulk_attr_t *attr_desc, int attr_count,
646    dmu_tx_t *tx)
647{
648	sa_os_t *sa = hdl->sa_os->os_sa;
649	uint64_t hash;
650	sa_buf_type_t buftype;
651	sa_hdr_phys_t *sahdr;
652	void *data_start;
653	int buf_space;
654	sa_attr_type_t *attrs, *attrs_start;
655	int i, lot_count;
656	int hdrsize;
657	int spillhdrsize = 0;
658	int used;
659	dmu_object_type_t bonustype;
660	sa_lot_t *lot;
661	int len_idx;
662	int spill_used;
663	boolean_t spilling;
664
665	dmu_buf_will_dirty(hdl->sa_bonus, tx);
666	bonustype = SA_BONUSTYPE_FROM_DB(hdl->sa_bonus);
667
668	/* first determine bonus header size and sum of all attributes */
669	hdrsize = sa_find_sizes(sa, attr_desc, attr_count, hdl->sa_bonus,
670	    SA_BONUS, &i, &used, &spilling);
671
672	if (used > SPA_OLD_MAXBLOCKSIZE)
673		return (SET_ERROR(EFBIG));
674
675	VERIFY(0 == dmu_set_bonus(hdl->sa_bonus, spilling ?
676	    MIN(DN_MAX_BONUSLEN - sizeof (blkptr_t), used + hdrsize) :
677	    used + hdrsize, tx));
678
679	ASSERT((bonustype == DMU_OT_ZNODE && spilling == 0) ||
680	    bonustype == DMU_OT_SA);
681
682	/* setup and size spill buffer when needed */
683	if (spilling) {
684		boolean_t dummy;
685
686		if (hdl->sa_spill == NULL) {
687			VERIFY(dmu_spill_hold_by_bonus(hdl->sa_bonus, NULL,
688			    &hdl->sa_spill) == 0);
689		}
690		dmu_buf_will_dirty(hdl->sa_spill, tx);
691
692		spillhdrsize = sa_find_sizes(sa, &attr_desc[i],
693		    attr_count - i, hdl->sa_spill, SA_SPILL, &i,
694		    &spill_used, &dummy);
695
696		if (spill_used > SPA_OLD_MAXBLOCKSIZE)
697			return (SET_ERROR(EFBIG));
698
699		buf_space = hdl->sa_spill->db_size - spillhdrsize;
700		if (BUF_SPACE_NEEDED(spill_used, spillhdrsize) >
701		    hdl->sa_spill->db_size)
702			VERIFY(0 == sa_resize_spill(hdl,
703			    BUF_SPACE_NEEDED(spill_used, spillhdrsize), tx));
704	}
705
706	/* setup starting pointers to lay down data */
707	data_start = (void *)((uintptr_t)hdl->sa_bonus->db_data + hdrsize);
708	sahdr = (sa_hdr_phys_t *)hdl->sa_bonus->db_data;
709	buftype = SA_BONUS;
710
711	if (spilling)
712		buf_space = (sa->sa_force_spill) ?
713		    0 : SA_BLKPTR_SPACE - hdrsize;
714	else
715		buf_space = hdl->sa_bonus->db_size - hdrsize;
716
717	attrs_start = attrs = kmem_alloc(sizeof (sa_attr_type_t) * attr_count,
718	    KM_SLEEP);
719	lot_count = 0;
720
721	for (i = 0, len_idx = 0, hash = -1ULL; i != attr_count; i++) {
722		uint16_t length;
723
724		ASSERT(IS_P2ALIGNED(data_start, 8));
725		ASSERT(IS_P2ALIGNED(buf_space, 8));
726		attrs[i] = attr_desc[i].sa_attr;
727		length = SA_REGISTERED_LEN(sa, attrs[i]);
728		if (length == 0)
729			length = attr_desc[i].sa_length;
730		else
731			VERIFY(length == attr_desc[i].sa_length);
732
733		if (buf_space < length) {  /* switch to spill buffer */
734			VERIFY(spilling);
735			VERIFY(bonustype == DMU_OT_SA);
736			if (buftype == SA_BONUS && !sa->sa_force_spill) {
737				sa_find_layout(hdl->sa_os, hash, attrs_start,
738				    lot_count, tx, &lot);
739				SA_SET_HDR(sahdr, lot->lot_num, hdrsize);
740			}
741
742			buftype = SA_SPILL;
743			hash = -1ULL;
744			len_idx = 0;
745
746			sahdr = (sa_hdr_phys_t *)hdl->sa_spill->db_data;
747			sahdr->sa_magic = SA_MAGIC;
748			data_start = (void *)((uintptr_t)sahdr +
749			    spillhdrsize);
750			attrs_start = &attrs[i];
751			buf_space = hdl->sa_spill->db_size - spillhdrsize;
752			lot_count = 0;
753		}
754		hash ^= SA_ATTR_HASH(attrs[i]);
755		attr_desc[i].sa_addr = data_start;
756		attr_desc[i].sa_size = length;
757		SA_COPY_DATA(attr_desc[i].sa_data_func, attr_desc[i].sa_data,
758		    data_start, length);
759		if (sa->sa_attr_table[attrs[i]].sa_length == 0) {
760			sahdr->sa_lengths[len_idx++] = length;
761		}
762		VERIFY((uintptr_t)data_start % 8 == 0);
763		data_start = (void *)P2ROUNDUP(((uintptr_t)data_start +
764		    length), 8);
765		buf_space -= P2ROUNDUP(length, 8);
766		lot_count++;
767	}
768
769	sa_find_layout(hdl->sa_os, hash, attrs_start, lot_count, tx, &lot);
770
771	/*
772	 * Verify that old znodes always have layout number 0.
773	 * Must be DMU_OT_SA for arbitrary layouts
774	 */
775	VERIFY((bonustype == DMU_OT_ZNODE && lot->lot_num == 0) ||
776	    (bonustype == DMU_OT_SA && lot->lot_num > 1));
777
778	if (bonustype == DMU_OT_SA) {
779		SA_SET_HDR(sahdr, lot->lot_num,
780		    buftype == SA_BONUS ? hdrsize : spillhdrsize);
781	}
782
783	kmem_free(attrs, sizeof (sa_attr_type_t) * attr_count);
784	if (hdl->sa_bonus_tab) {
785		sa_idx_tab_rele(hdl->sa_os, hdl->sa_bonus_tab);
786		hdl->sa_bonus_tab = NULL;
787	}
788	if (!sa->sa_force_spill)
789		VERIFY(0 == sa_build_index(hdl, SA_BONUS));
790	if (hdl->sa_spill) {
791		sa_idx_tab_rele(hdl->sa_os, hdl->sa_spill_tab);
792		if (!spilling) {
793			/*
794			 * remove spill block that is no longer needed.
795			 */
796			dmu_buf_rele(hdl->sa_spill, NULL);
797			hdl->sa_spill = NULL;
798			hdl->sa_spill_tab = NULL;
799			VERIFY(0 == dmu_rm_spill(hdl->sa_os,
800			    sa_handle_object(hdl), tx));
801		} else {
802			VERIFY(0 == sa_build_index(hdl, SA_SPILL));
803		}
804	}
805
806	return (0);
807}
808
809static void
810sa_free_attr_table(sa_os_t *sa)
811{
812	int i;
813
814	if (sa->sa_attr_table == NULL)
815		return;
816
817	for (i = 0; i != sa->sa_num_attrs; i++) {
818		if (sa->sa_attr_table[i].sa_name)
819			kmem_free(sa->sa_attr_table[i].sa_name,
820			    strlen(sa->sa_attr_table[i].sa_name) + 1);
821	}
822
823	kmem_free(sa->sa_attr_table,
824	    sizeof (sa_attr_table_t) * sa->sa_num_attrs);
825
826	sa->sa_attr_table = NULL;
827}
828
829static int
830sa_attr_table_setup(objset_t *os, sa_attr_reg_t *reg_attrs, int count)
831{
832	sa_os_t *sa = os->os_sa;
833	uint64_t sa_attr_count = 0;
834	uint64_t sa_reg_count = 0;
835	int error = 0;
836	uint64_t attr_value;
837	sa_attr_table_t *tb;
838	zap_cursor_t zc;
839	zap_attribute_t za;
840	int registered_count = 0;
841	int i;
842	dmu_objset_type_t ostype = dmu_objset_type(os);
843
844	sa->sa_user_table =
845	    kmem_zalloc(count * sizeof (sa_attr_type_t), KM_SLEEP);
846	sa->sa_user_table_sz = count * sizeof (sa_attr_type_t);
847
848	if (sa->sa_reg_attr_obj != 0) {
849		error = zap_count(os, sa->sa_reg_attr_obj,
850		    &sa_attr_count);
851
852		/*
853		 * Make sure we retrieved a count and that it isn't zero
854		 */
855		if (error || (error == 0 && sa_attr_count == 0)) {
856			if (error == 0)
857				error = SET_ERROR(EINVAL);
858			goto bail;
859		}
860		sa_reg_count = sa_attr_count;
861	}
862
863	if (ostype == DMU_OST_ZFS && sa_attr_count == 0)
864		sa_attr_count += sa_legacy_attr_count;
865
866	/* Allocate attribute numbers for attributes that aren't registered */
867	for (i = 0; i != count; i++) {
868		boolean_t found = B_FALSE;
869		int j;
870
871		if (ostype == DMU_OST_ZFS) {
872			for (j = 0; j != sa_legacy_attr_count; j++) {
873				if (strcmp(reg_attrs[i].sa_name,
874				    sa_legacy_attrs[j].sa_name) == 0) {
875					sa->sa_user_table[i] =
876					    sa_legacy_attrs[j].sa_attr;
877					found = B_TRUE;
878				}
879			}
880		}
881		if (found)
882			continue;
883
884		if (sa->sa_reg_attr_obj)
885			error = zap_lookup(os, sa->sa_reg_attr_obj,
886			    reg_attrs[i].sa_name, 8, 1, &attr_value);
887		else
888			error = SET_ERROR(ENOENT);
889		switch (error) {
890		case ENOENT:
891			sa->sa_user_table[i] = (sa_attr_type_t)sa_attr_count;
892			sa_attr_count++;
893			break;
894		case 0:
895			sa->sa_user_table[i] = ATTR_NUM(attr_value);
896			break;
897		default:
898			goto bail;
899		}
900	}
901
902	sa->sa_num_attrs = sa_attr_count;
903	tb = sa->sa_attr_table =
904	    kmem_zalloc(sizeof (sa_attr_table_t) * sa_attr_count, KM_SLEEP);
905
906	/*
907	 * Attribute table is constructed from requested attribute list,
908	 * previously foreign registered attributes, and also the legacy
909	 * ZPL set of attributes.
910	 */
911
912	if (sa->sa_reg_attr_obj) {
913		for (zap_cursor_init(&zc, os, sa->sa_reg_attr_obj);
914		    (error = zap_cursor_retrieve(&zc, &za)) == 0;
915		    zap_cursor_advance(&zc)) {
916			uint64_t value;
917			value  = za.za_first_integer;
918
919			registered_count++;
920			tb[ATTR_NUM(value)].sa_attr = ATTR_NUM(value);
921			tb[ATTR_NUM(value)].sa_length = ATTR_LENGTH(value);
922			tb[ATTR_NUM(value)].sa_byteswap = ATTR_BSWAP(value);
923			tb[ATTR_NUM(value)].sa_registered = B_TRUE;
924
925			if (tb[ATTR_NUM(value)].sa_name) {
926				continue;
927			}
928			tb[ATTR_NUM(value)].sa_name =
929			    kmem_zalloc(strlen(za.za_name) +1, KM_SLEEP);
930			(void) strlcpy(tb[ATTR_NUM(value)].sa_name, za.za_name,
931			    strlen(za.za_name) +1);
932		}
933		zap_cursor_fini(&zc);
934		/*
935		 * Make sure we processed the correct number of registered
936		 * attributes
937		 */
938		if (registered_count != sa_reg_count) {
939			ASSERT(error != 0);
940			goto bail;
941		}
942
943	}
944
945	if (ostype == DMU_OST_ZFS) {
946		for (i = 0; i != sa_legacy_attr_count; i++) {
947			if (tb[i].sa_name)
948				continue;
949			tb[i].sa_attr = sa_legacy_attrs[i].sa_attr;
950			tb[i].sa_length = sa_legacy_attrs[i].sa_length;
951			tb[i].sa_byteswap = sa_legacy_attrs[i].sa_byteswap;
952			tb[i].sa_registered = B_FALSE;
953			tb[i].sa_name =
954			    kmem_zalloc(strlen(sa_legacy_attrs[i].sa_name) +1,
955			    KM_SLEEP);
956			(void) strlcpy(tb[i].sa_name,
957			    sa_legacy_attrs[i].sa_name,
958			    strlen(sa_legacy_attrs[i].sa_name) + 1);
959		}
960	}
961
962	for (i = 0; i != count; i++) {
963		sa_attr_type_t attr_id;
964
965		attr_id = sa->sa_user_table[i];
966		if (tb[attr_id].sa_name)
967			continue;
968
969		tb[attr_id].sa_length = reg_attrs[i].sa_length;
970		tb[attr_id].sa_byteswap = reg_attrs[i].sa_byteswap;
971		tb[attr_id].sa_attr = attr_id;
972		tb[attr_id].sa_name =
973		    kmem_zalloc(strlen(reg_attrs[i].sa_name) + 1, KM_SLEEP);
974		(void) strlcpy(tb[attr_id].sa_name, reg_attrs[i].sa_name,
975		    strlen(reg_attrs[i].sa_name) + 1);
976	}
977
978	sa->sa_need_attr_registration =
979	    (sa_attr_count != registered_count);
980
981	return (0);
982bail:
983	kmem_free(sa->sa_user_table, count * sizeof (sa_attr_type_t));
984	sa->sa_user_table = NULL;
985	sa_free_attr_table(sa);
986	return ((error != 0) ? error : EINVAL);
987}
988
989int
990sa_setup(objset_t *os, uint64_t sa_obj, sa_attr_reg_t *reg_attrs, int count,
991    sa_attr_type_t **user_table)
992{
993	zap_cursor_t zc;
994	zap_attribute_t za;
995	sa_os_t *sa;
996	dmu_objset_type_t ostype = dmu_objset_type(os);
997	sa_attr_type_t *tb;
998	int error;
999
1000	mutex_enter(&os->os_user_ptr_lock);
1001	if (os->os_sa) {
1002		mutex_enter(&os->os_sa->sa_lock);
1003		mutex_exit(&os->os_user_ptr_lock);
1004		tb = os->os_sa->sa_user_table;
1005		mutex_exit(&os->os_sa->sa_lock);
1006		*user_table = tb;
1007		return (0);
1008	}
1009
1010	sa = kmem_zalloc(sizeof (sa_os_t), KM_SLEEP);
1011	mutex_init(&sa->sa_lock, NULL, MUTEX_DEFAULT, NULL);
1012	sa->sa_master_obj = sa_obj;
1013
1014	os->os_sa = sa;
1015	mutex_enter(&sa->sa_lock);
1016	mutex_exit(&os->os_user_ptr_lock);
1017	avl_create(&sa->sa_layout_num_tree, layout_num_compare,
1018	    sizeof (sa_lot_t), offsetof(sa_lot_t, lot_num_node));
1019	avl_create(&sa->sa_layout_hash_tree, layout_hash_compare,
1020	    sizeof (sa_lot_t), offsetof(sa_lot_t, lot_hash_node));
1021
1022	if (sa_obj) {
1023		error = zap_lookup(os, sa_obj, SA_LAYOUTS,
1024		    8, 1, &sa->sa_layout_attr_obj);
1025		if (error != 0 && error != ENOENT)
1026			goto fail;
1027		error = zap_lookup(os, sa_obj, SA_REGISTRY,
1028		    8, 1, &sa->sa_reg_attr_obj);
1029		if (error != 0 && error != ENOENT)
1030			goto fail;
1031	}
1032
1033	if ((error = sa_attr_table_setup(os, reg_attrs, count)) != 0)
1034		goto fail;
1035
1036	if (sa->sa_layout_attr_obj != 0) {
1037		uint64_t layout_count;
1038
1039		error = zap_count(os, sa->sa_layout_attr_obj,
1040		    &layout_count);
1041
1042		/*
1043		 * Layout number count should be > 0
1044		 */
1045		if (error || (error == 0 && layout_count == 0)) {
1046			if (error == 0)
1047				error = SET_ERROR(EINVAL);
1048			goto fail;
1049		}
1050
1051		for (zap_cursor_init(&zc, os, sa->sa_layout_attr_obj);
1052		    (error = zap_cursor_retrieve(&zc, &za)) == 0;
1053		    zap_cursor_advance(&zc)) {
1054			sa_attr_type_t *lot_attrs;
1055			uint64_t lot_num;
1056
1057			lot_attrs = kmem_zalloc(sizeof (sa_attr_type_t) *
1058			    za.za_num_integers, KM_SLEEP);
1059
1060			if ((error = (zap_lookup(os, sa->sa_layout_attr_obj,
1061			    za.za_name, 2, za.za_num_integers,
1062			    lot_attrs))) != 0) {
1063				kmem_free(lot_attrs, sizeof (sa_attr_type_t) *
1064				    za.za_num_integers);
1065				break;
1066			}
1067			VERIFY(ddi_strtoull(za.za_name, NULL, 10,
1068			    (unsigned long long *)&lot_num) == 0);
1069
1070			(void) sa_add_layout_entry(os, lot_attrs,
1071			    za.za_num_integers, lot_num,
1072			    sa_layout_info_hash(lot_attrs,
1073			    za.za_num_integers), B_FALSE, NULL);
1074			kmem_free(lot_attrs, sizeof (sa_attr_type_t) *
1075			    za.za_num_integers);
1076		}
1077		zap_cursor_fini(&zc);
1078
1079		/*
1080		 * Make sure layout count matches number of entries added
1081		 * to AVL tree
1082		 */
1083		if (avl_numnodes(&sa->sa_layout_num_tree) != layout_count) {
1084			ASSERT(error != 0);
1085			goto fail;
1086		}
1087	}
1088
1089	/* Add special layout number for old ZNODES */
1090	if (ostype == DMU_OST_ZFS) {
1091		(void) sa_add_layout_entry(os, sa_legacy_zpl_layout,
1092		    sa_legacy_attr_count, 0,
1093		    sa_layout_info_hash(sa_legacy_zpl_layout,
1094		    sa_legacy_attr_count), B_FALSE, NULL);
1095
1096		(void) sa_add_layout_entry(os, sa_dummy_zpl_layout, 0, 1,
1097		    0, B_FALSE, NULL);
1098	}
1099	*user_table = os->os_sa->sa_user_table;
1100	mutex_exit(&sa->sa_lock);
1101	return (0);
1102fail:
1103	os->os_sa = NULL;
1104	sa_free_attr_table(sa);
1105	if (sa->sa_user_table)
1106		kmem_free(sa->sa_user_table, sa->sa_user_table_sz);
1107	mutex_exit(&sa->sa_lock);
1108	avl_destroy(&sa->sa_layout_hash_tree);
1109	avl_destroy(&sa->sa_layout_num_tree);
1110	mutex_destroy(&sa->sa_lock);
1111	kmem_free(sa, sizeof (sa_os_t));
1112	return ((error == ECKSUM) ? EIO : error);
1113}
1114
1115void
1116sa_tear_down(objset_t *os)
1117{
1118	sa_os_t *sa = os->os_sa;
1119	sa_lot_t *layout;
1120	void *cookie;
1121
1122	kmem_free(sa->sa_user_table, sa->sa_user_table_sz);
1123
1124	/* Free up attr table */
1125
1126	sa_free_attr_table(sa);
1127
1128	cookie = NULL;
1129	while (layout = avl_destroy_nodes(&sa->sa_layout_hash_tree, &cookie)) {
1130		sa_idx_tab_t *tab;
1131		while (tab = list_head(&layout->lot_idx_tab)) {
1132			ASSERT(refcount_count(&tab->sa_refcount));
1133			sa_idx_tab_rele(os, tab);
1134		}
1135	}
1136
1137	cookie = NULL;
1138	while (layout = avl_destroy_nodes(&sa->sa_layout_num_tree, &cookie)) {
1139		kmem_free(layout->lot_attrs,
1140		    sizeof (sa_attr_type_t) * layout->lot_attr_count);
1141		kmem_free(layout, sizeof (sa_lot_t));
1142	}
1143
1144	avl_destroy(&sa->sa_layout_hash_tree);
1145	avl_destroy(&sa->sa_layout_num_tree);
1146	mutex_destroy(&sa->sa_lock);
1147
1148	kmem_free(sa, sizeof (sa_os_t));
1149	os->os_sa = NULL;
1150}
1151
1152void
1153sa_build_idx_tab(void *hdr, void *attr_addr, sa_attr_type_t attr,
1154    uint16_t length, int length_idx, boolean_t var_length, void *userp)
1155{
1156	sa_idx_tab_t *idx_tab = userp;
1157
1158	if (var_length) {
1159		ASSERT(idx_tab->sa_variable_lengths);
1160		idx_tab->sa_variable_lengths[length_idx] = length;
1161	}
1162	TOC_ATTR_ENCODE(idx_tab->sa_idx_tab[attr], length_idx,
1163	    (uint32_t)((uintptr_t)attr_addr - (uintptr_t)hdr));
1164}
1165
1166static void
1167sa_attr_iter(objset_t *os, sa_hdr_phys_t *hdr, dmu_object_type_t type,
1168    sa_iterfunc_t func, sa_lot_t *tab, void *userp)
1169{
1170	void *data_start;
1171	sa_lot_t *tb = tab;
1172	sa_lot_t search;
1173	avl_index_t loc;
1174	sa_os_t *sa = os->os_sa;
1175	int i;
1176	uint16_t *length_start = NULL;
1177	uint8_t length_idx = 0;
1178
1179	if (tab == NULL) {
1180		search.lot_num = SA_LAYOUT_NUM(hdr, type);
1181		tb = avl_find(&sa->sa_layout_num_tree, &search, &loc);
1182		ASSERT(tb);
1183	}
1184
1185	if (IS_SA_BONUSTYPE(type)) {
1186		data_start = (void *)P2ROUNDUP(((uintptr_t)hdr +
1187		    offsetof(sa_hdr_phys_t, sa_lengths) +
1188		    (sizeof (uint16_t) * tb->lot_var_sizes)), 8);
1189		length_start = hdr->sa_lengths;
1190	} else {
1191		data_start = hdr;
1192	}
1193
1194	for (i = 0; i != tb->lot_attr_count; i++) {
1195		int attr_length, reg_length;
1196		uint8_t idx_len;
1197
1198		reg_length = sa->sa_attr_table[tb->lot_attrs[i]].sa_length;
1199		if (reg_length) {
1200			attr_length = reg_length;
1201			idx_len = 0;
1202		} else {
1203			attr_length = length_start[length_idx];
1204			idx_len = length_idx++;
1205		}
1206
1207		func(hdr, data_start, tb->lot_attrs[i], attr_length,
1208		    idx_len, reg_length == 0 ? B_TRUE : B_FALSE, userp);
1209
1210		data_start = (void *)P2ROUNDUP(((uintptr_t)data_start +
1211		    attr_length), 8);
1212	}
1213}
1214
1215/*ARGSUSED*/
1216void
1217sa_byteswap_cb(void *hdr, void *attr_addr, sa_attr_type_t attr,
1218    uint16_t length, int length_idx, boolean_t variable_length, void *userp)
1219{
1220	sa_handle_t *hdl = userp;
1221	sa_os_t *sa = hdl->sa_os->os_sa;
1222
1223	sa_bswap_table[sa->sa_attr_table[attr].sa_byteswap](attr_addr, length);
1224}
1225
1226void
1227sa_byteswap(sa_handle_t *hdl, sa_buf_type_t buftype)
1228{
1229	sa_hdr_phys_t *sa_hdr_phys = SA_GET_HDR(hdl, buftype);
1230	dmu_buf_impl_t *db;
1231	sa_os_t *sa = hdl->sa_os->os_sa;
1232	int num_lengths = 1;
1233	int i;
1234
1235	ASSERT(MUTEX_HELD(&sa->sa_lock));
1236	if (sa_hdr_phys->sa_magic == SA_MAGIC)
1237		return;
1238
1239	db = SA_GET_DB(hdl, buftype);
1240
1241	if (buftype == SA_SPILL) {
1242		arc_release(db->db_buf, NULL);
1243		arc_buf_thaw(db->db_buf);
1244	}
1245
1246	sa_hdr_phys->sa_magic = BSWAP_32(sa_hdr_phys->sa_magic);
1247	sa_hdr_phys->sa_layout_info = BSWAP_16(sa_hdr_phys->sa_layout_info);
1248
1249	/*
1250	 * Determine number of variable lenghts in header
1251	 * The standard 8 byte header has one for free and a
1252	 * 16 byte header would have 4 + 1;
1253	 */
1254	if (SA_HDR_SIZE(sa_hdr_phys) > 8)
1255		num_lengths += (SA_HDR_SIZE(sa_hdr_phys) - 8) >> 1;
1256	for (i = 0; i != num_lengths; i++)
1257		sa_hdr_phys->sa_lengths[i] =
1258		    BSWAP_16(sa_hdr_phys->sa_lengths[i]);
1259
1260	sa_attr_iter(hdl->sa_os, sa_hdr_phys, DMU_OT_SA,
1261	    sa_byteswap_cb, NULL, hdl);
1262
1263	if (buftype == SA_SPILL)
1264		arc_buf_freeze(((dmu_buf_impl_t *)hdl->sa_spill)->db_buf);
1265}
1266
1267static int
1268sa_build_index(sa_handle_t *hdl, sa_buf_type_t buftype)
1269{
1270	sa_hdr_phys_t *sa_hdr_phys;
1271	dmu_buf_impl_t *db = SA_GET_DB(hdl, buftype);
1272	dmu_object_type_t bonustype = SA_BONUSTYPE_FROM_DB(db);
1273	sa_os_t *sa = hdl->sa_os->os_sa;
1274	sa_idx_tab_t *idx_tab;
1275
1276	sa_hdr_phys = SA_GET_HDR(hdl, buftype);
1277
1278	mutex_enter(&sa->sa_lock);
1279
1280	/* Do we need to byteswap? */
1281
1282	/* only check if not old znode */
1283	if (IS_SA_BONUSTYPE(bonustype) && sa_hdr_phys->sa_magic != SA_MAGIC &&
1284	    sa_hdr_phys->sa_magic != 0) {
1285		VERIFY(BSWAP_32(sa_hdr_phys->sa_magic) == SA_MAGIC);
1286		sa_byteswap(hdl, buftype);
1287	}
1288
1289	idx_tab = sa_find_idx_tab(hdl->sa_os, bonustype, sa_hdr_phys);
1290
1291	if (buftype == SA_BONUS)
1292		hdl->sa_bonus_tab = idx_tab;
1293	else
1294		hdl->sa_spill_tab = idx_tab;
1295
1296	mutex_exit(&sa->sa_lock);
1297	return (0);
1298}
1299
1300/*ARGSUSED*/
1301static void
1302sa_evict(void *dbu)
1303{
1304	panic("evicting sa dbuf\n");
1305}
1306
1307static void
1308sa_idx_tab_rele(objset_t *os, void *arg)
1309{
1310	sa_os_t *sa = os->os_sa;
1311	sa_idx_tab_t *idx_tab = arg;
1312
1313	if (idx_tab == NULL)
1314		return;
1315
1316	mutex_enter(&sa->sa_lock);
1317	if (refcount_remove(&idx_tab->sa_refcount, NULL) == 0) {
1318		list_remove(&idx_tab->sa_layout->lot_idx_tab, idx_tab);
1319		if (idx_tab->sa_variable_lengths)
1320			kmem_free(idx_tab->sa_variable_lengths,
1321			    sizeof (uint16_t) *
1322			    idx_tab->sa_layout->lot_var_sizes);
1323		refcount_destroy(&idx_tab->sa_refcount);
1324		kmem_free(idx_tab->sa_idx_tab,
1325		    sizeof (uint32_t) * sa->sa_num_attrs);
1326		kmem_free(idx_tab, sizeof (sa_idx_tab_t));
1327	}
1328	mutex_exit(&sa->sa_lock);
1329}
1330
1331static void
1332sa_idx_tab_hold(objset_t *os, sa_idx_tab_t *idx_tab)
1333{
1334	sa_os_t *sa = os->os_sa;
1335
1336	ASSERT(MUTEX_HELD(&sa->sa_lock));
1337	(void) refcount_add(&idx_tab->sa_refcount, NULL);
1338}
1339
1340void
1341sa_handle_destroy(sa_handle_t *hdl)
1342{
1343	dmu_buf_t *db = hdl->sa_bonus;
1344
1345	mutex_enter(&hdl->sa_lock);
1346	(void) dmu_buf_remove_user(db, &hdl->sa_dbu);
1347
1348	if (hdl->sa_bonus_tab)
1349		sa_idx_tab_rele(hdl->sa_os, hdl->sa_bonus_tab);
1350
1351	if (hdl->sa_spill_tab)
1352		sa_idx_tab_rele(hdl->sa_os, hdl->sa_spill_tab);
1353
1354	dmu_buf_rele(hdl->sa_bonus, NULL);
1355
1356	if (hdl->sa_spill)
1357		dmu_buf_rele((dmu_buf_t *)hdl->sa_spill, NULL);
1358	mutex_exit(&hdl->sa_lock);
1359
1360	kmem_cache_free(sa_cache, hdl);
1361}
1362
1363int
1364sa_handle_get_from_db(objset_t *os, dmu_buf_t *db, void *userp,
1365    sa_handle_type_t hdl_type, sa_handle_t **handlepp)
1366{
1367	int error = 0;
1368	dmu_object_info_t doi;
1369	sa_handle_t *handle = NULL;
1370
1371#ifdef ZFS_DEBUG
1372	dmu_object_info_from_db(db, &doi);
1373	ASSERT(doi.doi_bonus_type == DMU_OT_SA ||
1374	    doi.doi_bonus_type == DMU_OT_ZNODE);
1375#endif
1376	/* find handle, if it exists */
1377	/* if one doesn't exist then create a new one, and initialize it */
1378
1379	if (hdl_type == SA_HDL_SHARED)
1380		handle = dmu_buf_get_user(db);
1381
1382	if (handle == NULL) {
1383		sa_handle_t *winner = NULL;
1384
1385		handle = kmem_cache_alloc(sa_cache, KM_SLEEP);
1386		handle->sa_dbu.dbu_evict_func = NULL;
1387		handle->sa_userp = userp;
1388		handle->sa_bonus = db;
1389		handle->sa_os = os;
1390		handle->sa_spill = NULL;
1391		handle->sa_bonus_tab = NULL;
1392		handle->sa_spill_tab = NULL;
1393
1394		error = sa_build_index(handle, SA_BONUS);
1395
1396		if (hdl_type == SA_HDL_SHARED) {
1397			dmu_buf_init_user(&handle->sa_dbu, sa_evict, NULL);
1398			winner = dmu_buf_set_user_ie(db, &handle->sa_dbu);
1399		}
1400
1401		if (winner != NULL) {
1402			kmem_cache_free(sa_cache, handle);
1403			handle = winner;
1404		}
1405	}
1406	*handlepp = handle;
1407
1408	return (error);
1409}
1410
1411int
1412sa_handle_get(objset_t *objset, uint64_t objid, void *userp,
1413    sa_handle_type_t hdl_type, sa_handle_t **handlepp)
1414{
1415	dmu_buf_t *db;
1416	int error;
1417
1418	if (error = dmu_bonus_hold(objset, objid, NULL, &db))
1419		return (error);
1420
1421	return (sa_handle_get_from_db(objset, db, userp, hdl_type,
1422	    handlepp));
1423}
1424
1425int
1426sa_buf_hold(objset_t *objset, uint64_t obj_num, void *tag, dmu_buf_t **db)
1427{
1428	return (dmu_bonus_hold(objset, obj_num, tag, db));
1429}
1430
1431void
1432sa_buf_rele(dmu_buf_t *db, void *tag)
1433{
1434	dmu_buf_rele(db, tag);
1435}
1436
1437int
1438sa_lookup_impl(sa_handle_t *hdl, sa_bulk_attr_t *bulk, int count)
1439{
1440	ASSERT(hdl);
1441	ASSERT(MUTEX_HELD(&hdl->sa_lock));
1442	return (sa_attr_op(hdl, bulk, count, SA_LOOKUP, NULL));
1443}
1444
1445int
1446sa_lookup(sa_handle_t *hdl, sa_attr_type_t attr, void *buf, uint32_t buflen)
1447{
1448	int error;
1449	sa_bulk_attr_t bulk;
1450
1451	bulk.sa_attr = attr;
1452	bulk.sa_data = buf;
1453	bulk.sa_length = buflen;
1454	bulk.sa_data_func = NULL;
1455
1456	ASSERT(hdl);
1457	mutex_enter(&hdl->sa_lock);
1458	error = sa_lookup_impl(hdl, &bulk, 1);
1459	mutex_exit(&hdl->sa_lock);
1460	return (error);
1461}
1462
1463#ifdef _KERNEL
1464int
1465sa_lookup_uio(sa_handle_t *hdl, sa_attr_type_t attr, uio_t *uio)
1466{
1467	int error;
1468	sa_bulk_attr_t bulk;
1469
1470	bulk.sa_data = NULL;
1471	bulk.sa_attr = attr;
1472	bulk.sa_data_func = NULL;
1473
1474	ASSERT(hdl);
1475
1476	mutex_enter(&hdl->sa_lock);
1477	if ((error = sa_attr_op(hdl, &bulk, 1, SA_LOOKUP, NULL)) == 0) {
1478		error = uiomove((void *)bulk.sa_addr, MIN(bulk.sa_size,
1479		    uio->uio_resid), UIO_READ, uio);
1480	}
1481	mutex_exit(&hdl->sa_lock);
1482	return (error);
1483
1484}
1485#endif
1486
1487void *
1488sa_find_idx_tab(objset_t *os, dmu_object_type_t bonustype, void *data)
1489{
1490	sa_idx_tab_t *idx_tab;
1491	sa_hdr_phys_t *hdr = (sa_hdr_phys_t *)data;
1492	sa_os_t *sa = os->os_sa;
1493	sa_lot_t *tb, search;
1494	avl_index_t loc;
1495
1496	/*
1497	 * Deterimine layout number.  If SA node and header == 0 then
1498	 * force the index table to the dummy "1" empty layout.
1499	 *
1500	 * The layout number would only be zero for a newly created file
1501	 * that has not added any attributes yet, or with crypto enabled which
1502	 * doesn't write any attributes to the bonus buffer.
1503	 */
1504
1505	search.lot_num = SA_LAYOUT_NUM(hdr, bonustype);
1506
1507	tb = avl_find(&sa->sa_layout_num_tree, &search, &loc);
1508
1509	/* Verify header size is consistent with layout information */
1510	ASSERT(tb);
1511	ASSERT(IS_SA_BONUSTYPE(bonustype) &&
1512	    SA_HDR_SIZE_MATCH_LAYOUT(hdr, tb) || !IS_SA_BONUSTYPE(bonustype) ||
1513	    (IS_SA_BONUSTYPE(bonustype) && hdr->sa_layout_info == 0));
1514
1515	/*
1516	 * See if any of the already existing TOC entries can be reused?
1517	 */
1518
1519	for (idx_tab = list_head(&tb->lot_idx_tab); idx_tab;
1520	    idx_tab = list_next(&tb->lot_idx_tab, idx_tab)) {
1521		boolean_t valid_idx = B_TRUE;
1522		int i;
1523
1524		if (tb->lot_var_sizes != 0 &&
1525		    idx_tab->sa_variable_lengths != NULL) {
1526			for (i = 0; i != tb->lot_var_sizes; i++) {
1527				if (hdr->sa_lengths[i] !=
1528				    idx_tab->sa_variable_lengths[i]) {
1529					valid_idx = B_FALSE;
1530					break;
1531				}
1532			}
1533		}
1534		if (valid_idx) {
1535			sa_idx_tab_hold(os, idx_tab);
1536			return (idx_tab);
1537		}
1538	}
1539
1540	/* No such luck, create a new entry */
1541	idx_tab = kmem_zalloc(sizeof (sa_idx_tab_t), KM_SLEEP);
1542	idx_tab->sa_idx_tab =
1543	    kmem_zalloc(sizeof (uint32_t) * sa->sa_num_attrs, KM_SLEEP);
1544	idx_tab->sa_layout = tb;
1545	refcount_create(&idx_tab->sa_refcount);
1546	if (tb->lot_var_sizes)
1547		idx_tab->sa_variable_lengths = kmem_alloc(sizeof (uint16_t) *
1548		    tb->lot_var_sizes, KM_SLEEP);
1549
1550	sa_attr_iter(os, hdr, bonustype, sa_build_idx_tab,
1551	    tb, idx_tab);
1552	sa_idx_tab_hold(os, idx_tab);   /* one hold for consumer */
1553	sa_idx_tab_hold(os, idx_tab);	/* one for layout */
1554	list_insert_tail(&tb->lot_idx_tab, idx_tab);
1555	return (idx_tab);
1556}
1557
1558void
1559sa_default_locator(void **dataptr, uint32_t *len, uint32_t total_len,
1560    boolean_t start, void *userdata)
1561{
1562	ASSERT(start);
1563
1564	*dataptr = userdata;
1565	*len = total_len;
1566}
1567
1568static void
1569sa_attr_register_sync(sa_handle_t *hdl, dmu_tx_t *tx)
1570{
1571	uint64_t attr_value = 0;
1572	sa_os_t *sa = hdl->sa_os->os_sa;
1573	sa_attr_table_t *tb = sa->sa_attr_table;
1574	int i;
1575
1576	mutex_enter(&sa->sa_lock);
1577
1578	if (!sa->sa_need_attr_registration || sa->sa_master_obj == 0) {
1579		mutex_exit(&sa->sa_lock);
1580		return;
1581	}
1582
1583	if (sa->sa_reg_attr_obj == 0) {
1584		sa->sa_reg_attr_obj = zap_create_link(hdl->sa_os,
1585		    DMU_OT_SA_ATTR_REGISTRATION,
1586		    sa->sa_master_obj, SA_REGISTRY, tx);
1587	}
1588	for (i = 0; i != sa->sa_num_attrs; i++) {
1589		if (sa->sa_attr_table[i].sa_registered)
1590			continue;
1591		ATTR_ENCODE(attr_value, tb[i].sa_attr, tb[i].sa_length,
1592		    tb[i].sa_byteswap);
1593		VERIFY(0 == zap_update(hdl->sa_os, sa->sa_reg_attr_obj,
1594		    tb[i].sa_name, 8, 1, &attr_value, tx));
1595		tb[i].sa_registered = B_TRUE;
1596	}
1597	sa->sa_need_attr_registration = B_FALSE;
1598	mutex_exit(&sa->sa_lock);
1599}
1600
1601/*
1602 * Replace all attributes with attributes specified in template.
1603 * If dnode had a spill buffer then those attributes will be
1604 * also be replaced, possibly with just an empty spill block
1605 *
1606 * This interface is intended to only be used for bulk adding of
1607 * attributes for a new file.  It will also be used by the ZPL
1608 * when converting and old formatted znode to native SA support.
1609 */
1610int
1611sa_replace_all_by_template_locked(sa_handle_t *hdl, sa_bulk_attr_t *attr_desc,
1612    int attr_count, dmu_tx_t *tx)
1613{
1614	sa_os_t *sa = hdl->sa_os->os_sa;
1615
1616	if (sa->sa_need_attr_registration)
1617		sa_attr_register_sync(hdl, tx);
1618	return (sa_build_layouts(hdl, attr_desc, attr_count, tx));
1619}
1620
1621int
1622sa_replace_all_by_template(sa_handle_t *hdl, sa_bulk_attr_t *attr_desc,
1623    int attr_count, dmu_tx_t *tx)
1624{
1625	int error;
1626
1627	mutex_enter(&hdl->sa_lock);
1628	error = sa_replace_all_by_template_locked(hdl, attr_desc,
1629	    attr_count, tx);
1630	mutex_exit(&hdl->sa_lock);
1631	return (error);
1632}
1633
1634/*
1635 * Add/remove a single attribute or replace a variable-sized attribute value
1636 * with a value of a different size, and then rewrite the entire set
1637 * of attributes.
1638 * Same-length attribute value replacement (including fixed-length attributes)
1639 * is handled more efficiently by the upper layers.
1640 */
1641static int
1642sa_modify_attrs(sa_handle_t *hdl, sa_attr_type_t newattr,
1643    sa_data_op_t action, sa_data_locator_t *locator, void *datastart,
1644    uint16_t buflen, dmu_tx_t *tx)
1645{
1646	sa_os_t *sa = hdl->sa_os->os_sa;
1647	dmu_buf_impl_t *db = (dmu_buf_impl_t *)hdl->sa_bonus;
1648	dnode_t *dn;
1649	sa_bulk_attr_t *attr_desc;
1650	void *old_data[2];
1651	int bonus_attr_count = 0;
1652	int bonus_data_size = 0;
1653	int spill_data_size = 0;
1654	int spill_attr_count = 0;
1655	int error;
1656	uint16_t length, reg_length;
1657	int i, j, k, length_idx;
1658	sa_hdr_phys_t *hdr;
1659	sa_idx_tab_t *idx_tab;
1660	int attr_count;
1661	int count;
1662
1663	ASSERT(MUTEX_HELD(&hdl->sa_lock));
1664
1665	/* First make of copy of the old data */
1666
1667	DB_DNODE_ENTER(db);
1668	dn = DB_DNODE(db);
1669	if (dn->dn_bonuslen != 0) {
1670		bonus_data_size = hdl->sa_bonus->db_size;
1671		old_data[0] = kmem_alloc(bonus_data_size, KM_SLEEP);
1672		bcopy(hdl->sa_bonus->db_data, old_data[0],
1673		    hdl->sa_bonus->db_size);
1674		bonus_attr_count = hdl->sa_bonus_tab->sa_layout->lot_attr_count;
1675	} else {
1676		old_data[0] = NULL;
1677	}
1678	DB_DNODE_EXIT(db);
1679
1680	/* Bring spill buffer online if it isn't currently */
1681
1682	if ((error = sa_get_spill(hdl)) == 0) {
1683		spill_data_size = hdl->sa_spill->db_size;
1684		old_data[1] = kmem_alloc(spill_data_size, KM_SLEEP);
1685		bcopy(hdl->sa_spill->db_data, old_data[1],
1686		    hdl->sa_spill->db_size);
1687		spill_attr_count =
1688		    hdl->sa_spill_tab->sa_layout->lot_attr_count;
1689	} else if (error && error != ENOENT) {
1690		if (old_data[0])
1691			kmem_free(old_data[0], bonus_data_size);
1692		return (error);
1693	} else {
1694		old_data[1] = NULL;
1695	}
1696
1697	/* build descriptor of all attributes */
1698
1699	attr_count = bonus_attr_count + spill_attr_count;
1700	if (action == SA_ADD)
1701		attr_count++;
1702	else if (action == SA_REMOVE)
1703		attr_count--;
1704
1705	attr_desc = kmem_zalloc(sizeof (sa_bulk_attr_t) * attr_count, KM_SLEEP);
1706
1707	/*
1708	 * loop through bonus and spill buffer if it exists, and
1709	 * build up new attr_descriptor to reset the attributes
1710	 */
1711	k = j = 0;
1712	count = bonus_attr_count;
1713	hdr = SA_GET_HDR(hdl, SA_BONUS);
1714	idx_tab = SA_IDX_TAB_GET(hdl, SA_BONUS);
1715	for (; k != 2; k++) {
1716		/*
1717		 * Iterate over each attribute in layout.  Fetch the
1718		 * size of variable-length attributes needing rewrite
1719		 * from sa_lengths[].
1720		 */
1721		for (i = 0, length_idx = 0; i != count; i++) {
1722			sa_attr_type_t attr;
1723
1724			attr = idx_tab->sa_layout->lot_attrs[i];
1725			reg_length = SA_REGISTERED_LEN(sa, attr);
1726			if (reg_length == 0) {
1727				length = hdr->sa_lengths[length_idx];
1728				length_idx++;
1729			} else {
1730				length = reg_length;
1731			}
1732			if (attr == newattr) {
1733				/*
1734				 * There is nothing to do for SA_REMOVE,
1735				 * so it is just skipped.
1736				 */
1737				if (action == SA_REMOVE)
1738					continue;
1739
1740				/*
1741				 * Duplicate attributes are not allowed, so the
1742				 * action can not be SA_ADD here.
1743				 */
1744				ASSERT3S(action, ==, SA_REPLACE);
1745
1746				/*
1747				 * Only a variable-sized attribute can be
1748				 * replaced here, and its size must be changing.
1749				 */
1750				ASSERT3U(reg_length, ==, 0);
1751				ASSERT3U(length, !=, buflen);
1752				SA_ADD_BULK_ATTR(attr_desc, j, attr,
1753				    locator, datastart, buflen);
1754			} else {
1755				SA_ADD_BULK_ATTR(attr_desc, j, attr,
1756				    NULL, (void *)
1757				    (TOC_OFF(idx_tab->sa_idx_tab[attr]) +
1758				    (uintptr_t)old_data[k]), length);
1759			}
1760		}
1761		if (k == 0 && hdl->sa_spill) {
1762			hdr = SA_GET_HDR(hdl, SA_SPILL);
1763			idx_tab = SA_IDX_TAB_GET(hdl, SA_SPILL);
1764			count = spill_attr_count;
1765		} else {
1766			break;
1767		}
1768	}
1769	if (action == SA_ADD) {
1770		reg_length = SA_REGISTERED_LEN(sa, newattr);
1771		IMPLY(reg_length != 0, reg_length == buflen);
1772		SA_ADD_BULK_ATTR(attr_desc, j, newattr, locator,
1773		    datastart, buflen);
1774	}
1775	ASSERT3U(j, ==, attr_count);
1776
1777	error = sa_build_layouts(hdl, attr_desc, attr_count, tx);
1778
1779	if (old_data[0])
1780		kmem_free(old_data[0], bonus_data_size);
1781	if (old_data[1])
1782		kmem_free(old_data[1], spill_data_size);
1783	kmem_free(attr_desc, sizeof (sa_bulk_attr_t) * attr_count);
1784
1785	return (error);
1786}
1787
1788static int
1789sa_bulk_update_impl(sa_handle_t *hdl, sa_bulk_attr_t *bulk, int count,
1790    dmu_tx_t *tx)
1791{
1792	int error;
1793	sa_os_t *sa = hdl->sa_os->os_sa;
1794	dmu_object_type_t bonustype;
1795
1796	bonustype = SA_BONUSTYPE_FROM_DB(SA_GET_DB(hdl, SA_BONUS));
1797
1798	ASSERT(hdl);
1799	ASSERT(MUTEX_HELD(&hdl->sa_lock));
1800
1801	/* sync out registration table if necessary */
1802	if (sa->sa_need_attr_registration)
1803		sa_attr_register_sync(hdl, tx);
1804
1805	error = sa_attr_op(hdl, bulk, count, SA_UPDATE, tx);
1806	if (error == 0 && !IS_SA_BONUSTYPE(bonustype) && sa->sa_update_cb)
1807		sa->sa_update_cb(hdl, tx);
1808
1809	return (error);
1810}
1811
1812/*
1813 * update or add new attribute
1814 */
1815int
1816sa_update(sa_handle_t *hdl, sa_attr_type_t type,
1817    void *buf, uint32_t buflen, dmu_tx_t *tx)
1818{
1819	int error;
1820	sa_bulk_attr_t bulk;
1821
1822	bulk.sa_attr = type;
1823	bulk.sa_data_func = NULL;
1824	bulk.sa_length = buflen;
1825	bulk.sa_data = buf;
1826
1827	mutex_enter(&hdl->sa_lock);
1828	error = sa_bulk_update_impl(hdl, &bulk, 1, tx);
1829	mutex_exit(&hdl->sa_lock);
1830	return (error);
1831}
1832
1833int
1834sa_update_from_cb(sa_handle_t *hdl, sa_attr_type_t attr,
1835    uint32_t buflen, sa_data_locator_t *locator, void *userdata, dmu_tx_t *tx)
1836{
1837	int error;
1838	sa_bulk_attr_t bulk;
1839
1840	bulk.sa_attr = attr;
1841	bulk.sa_data = userdata;
1842	bulk.sa_data_func = locator;
1843	bulk.sa_length = buflen;
1844
1845	mutex_enter(&hdl->sa_lock);
1846	error = sa_bulk_update_impl(hdl, &bulk, 1, tx);
1847	mutex_exit(&hdl->sa_lock);
1848	return (error);
1849}
1850
1851/*
1852 * Return size of an attribute
1853 */
1854
1855int
1856sa_size(sa_handle_t *hdl, sa_attr_type_t attr, int *size)
1857{
1858	sa_bulk_attr_t bulk;
1859	int error;
1860
1861	bulk.sa_data = NULL;
1862	bulk.sa_attr = attr;
1863	bulk.sa_data_func = NULL;
1864
1865	ASSERT(hdl);
1866	mutex_enter(&hdl->sa_lock);
1867	if ((error = sa_attr_op(hdl, &bulk, 1, SA_LOOKUP, NULL)) != 0) {
1868		mutex_exit(&hdl->sa_lock);
1869		return (error);
1870	}
1871	*size = bulk.sa_size;
1872
1873	mutex_exit(&hdl->sa_lock);
1874	return (0);
1875}
1876
1877int
1878sa_bulk_lookup_locked(sa_handle_t *hdl, sa_bulk_attr_t *attrs, int count)
1879{
1880	ASSERT(hdl);
1881	ASSERT(MUTEX_HELD(&hdl->sa_lock));
1882	return (sa_lookup_impl(hdl, attrs, count));
1883}
1884
1885int
1886sa_bulk_lookup(sa_handle_t *hdl, sa_bulk_attr_t *attrs, int count)
1887{
1888	int error;
1889
1890	ASSERT(hdl);
1891	mutex_enter(&hdl->sa_lock);
1892	error = sa_bulk_lookup_locked(hdl, attrs, count);
1893	mutex_exit(&hdl->sa_lock);
1894	return (error);
1895}
1896
1897int
1898sa_bulk_update(sa_handle_t *hdl, sa_bulk_attr_t *attrs, int count, dmu_tx_t *tx)
1899{
1900	int error;
1901
1902	ASSERT(hdl);
1903	mutex_enter(&hdl->sa_lock);
1904	error = sa_bulk_update_impl(hdl, attrs, count, tx);
1905	mutex_exit(&hdl->sa_lock);
1906	return (error);
1907}
1908
1909int
1910sa_remove(sa_handle_t *hdl, sa_attr_type_t attr, dmu_tx_t *tx)
1911{
1912	int error;
1913
1914	mutex_enter(&hdl->sa_lock);
1915	error = sa_modify_attrs(hdl, attr, SA_REMOVE, NULL,
1916	    NULL, 0, tx);
1917	mutex_exit(&hdl->sa_lock);
1918	return (error);
1919}
1920
1921void
1922sa_object_info(sa_handle_t *hdl, dmu_object_info_t *doi)
1923{
1924	dmu_object_info_from_db((dmu_buf_t *)hdl->sa_bonus, doi);
1925}
1926
1927void
1928sa_object_size(sa_handle_t *hdl, uint32_t *blksize, u_longlong_t *nblocks)
1929{
1930	dmu_object_size_from_db((dmu_buf_t *)hdl->sa_bonus,
1931	    blksize, nblocks);
1932}
1933
1934void
1935sa_set_userp(sa_handle_t *hdl, void *ptr)
1936{
1937	hdl->sa_userp = ptr;
1938}
1939
1940dmu_buf_t *
1941sa_get_db(sa_handle_t *hdl)
1942{
1943	return ((dmu_buf_t *)hdl->sa_bonus);
1944}
1945
1946void *
1947sa_get_userdata(sa_handle_t *hdl)
1948{
1949	return (hdl->sa_userp);
1950}
1951
1952void
1953sa_register_update_callback_locked(objset_t *os, sa_update_cb_t *func)
1954{
1955	ASSERT(MUTEX_HELD(&os->os_sa->sa_lock));
1956	os->os_sa->sa_update_cb = func;
1957}
1958
1959void
1960sa_register_update_callback(objset_t *os, sa_update_cb_t *func)
1961{
1962
1963	mutex_enter(&os->os_sa->sa_lock);
1964	sa_register_update_callback_locked(os, func);
1965	mutex_exit(&os->os_sa->sa_lock);
1966}
1967
1968uint64_t
1969sa_handle_object(sa_handle_t *hdl)
1970{
1971	return (hdl->sa_bonus->db_object);
1972}
1973
1974boolean_t
1975sa_enabled(objset_t *os)
1976{
1977	return (os->os_sa == NULL);
1978}
1979
1980int
1981sa_set_sa_object(objset_t *os, uint64_t sa_object)
1982{
1983	sa_os_t *sa = os->os_sa;
1984
1985	if (sa->sa_master_obj)
1986		return (1);
1987
1988	sa->sa_master_obj = sa_object;
1989
1990	return (0);
1991}
1992
1993int
1994sa_hdrsize(void *arg)
1995{
1996	sa_hdr_phys_t *hdr = arg;
1997
1998	return (SA_HDR_SIZE(hdr));
1999}
2000
2001void
2002sa_handle_lock(sa_handle_t *hdl)
2003{
2004	ASSERT(hdl);
2005	mutex_enter(&hdl->sa_lock);
2006}
2007
2008void
2009sa_handle_unlock(sa_handle_t *hdl)
2010{
2011	ASSERT(hdl);
2012	mutex_exit(&hdl->sa_lock);
2013}
2014