sa.c revision 276081
1/* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 22/* 23 * Copyright (c) 2010, Oracle and/or its affiliates. All rights reserved. 24 * Portions Copyright 2011 iXsystems, Inc 25 * Copyright (c) 2013 by Delphix. All rights reserved. 26 */ 27 28#include <sys/zfs_context.h> 29#include <sys/types.h> 30#include <sys/param.h> 31#include <sys/systm.h> 32#include <sys/sysmacros.h> 33#include <sys/dmu.h> 34#include <sys/dmu_impl.h> 35#include <sys/dmu_objset.h> 36#include <sys/dbuf.h> 37#include <sys/dnode.h> 38#include <sys/zap.h> 39#include <sys/sa.h> 40#include <sys/sunddi.h> 41#include <sys/sa_impl.h> 42#include <sys/dnode.h> 43#include <sys/errno.h> 44#include <sys/zfs_context.h> 45 46/* 47 * ZFS System attributes: 48 * 49 * A generic mechanism to allow for arbitrary attributes 50 * to be stored in a dnode. The data will be stored in the bonus buffer of 51 * the dnode and if necessary a special "spill" block will be used to handle 52 * overflow situations. The spill block will be sized to fit the data 53 * from 512 - 128K. When a spill block is used the BP (blkptr_t) for the 54 * spill block is stored at the end of the current bonus buffer. Any 55 * attributes that would be in the way of the blkptr_t will be relocated 56 * into the spill block. 57 * 58 * Attribute registration: 59 * 60 * Stored persistently on a per dataset basis 61 * a mapping between attribute "string" names and their actual attribute 62 * numeric values, length, and byteswap function. The names are only used 63 * during registration. All attributes are known by their unique attribute 64 * id value. If an attribute can have a variable size then the value 65 * 0 will be used to indicate this. 66 * 67 * Attribute Layout: 68 * 69 * Attribute layouts are a way to compactly store multiple attributes, but 70 * without taking the overhead associated with managing each attribute 71 * individually. Since you will typically have the same set of attributes 72 * stored in the same order a single table will be used to represent that 73 * layout. The ZPL for example will usually have only about 10 different 74 * layouts (regular files, device files, symlinks, 75 * regular files + scanstamp, files/dir with extended attributes, and then 76 * you have the possibility of all of those minus ACL, because it would 77 * be kicked out into the spill block) 78 * 79 * Layouts are simply an array of the attributes and their 80 * ordering i.e. [0, 1, 4, 5, 2] 81 * 82 * Each distinct layout is given a unique layout number and that is whats 83 * stored in the header at the beginning of the SA data buffer. 84 * 85 * A layout only covers a single dbuf (bonus or spill). If a set of 86 * attributes is split up between the bonus buffer and a spill buffer then 87 * two different layouts will be used. This allows us to byteswap the 88 * spill without looking at the bonus buffer and keeps the on disk format of 89 * the bonus and spill buffer the same. 90 * 91 * Adding a single attribute will cause the entire set of attributes to 92 * be rewritten and could result in a new layout number being constructed 93 * as part of the rewrite if no such layout exists for the new set of 94 * attribues. The new attribute will be appended to the end of the already 95 * existing attributes. 96 * 97 * Both the attribute registration and attribute layout information are 98 * stored in normal ZAP attributes. Their should be a small number of 99 * known layouts and the set of attributes is assumed to typically be quite 100 * small. 101 * 102 * The registered attributes and layout "table" information is maintained 103 * in core and a special "sa_os_t" is attached to the objset_t. 104 * 105 * A special interface is provided to allow for quickly applying 106 * a large set of attributes at once. sa_replace_all_by_template() is 107 * used to set an array of attributes. This is used by the ZPL when 108 * creating a brand new file. The template that is passed into the function 109 * specifies the attribute, size for variable length attributes, location of 110 * data and special "data locator" function if the data isn't in a contiguous 111 * location. 112 * 113 * Byteswap implications: 114 * 115 * Since the SA attributes are not entirely self describing we can't do 116 * the normal byteswap processing. The special ZAP layout attribute and 117 * attribute registration attributes define the byteswap function and the 118 * size of the attributes, unless it is variable sized. 119 * The normal ZFS byteswapping infrastructure assumes you don't need 120 * to read any objects in order to do the necessary byteswapping. Whereas 121 * SA attributes can only be properly byteswapped if the dataset is opened 122 * and the layout/attribute ZAP attributes are available. Because of this 123 * the SA attributes will be byteswapped when they are first accessed by 124 * the SA code that will read the SA data. 125 */ 126 127typedef void (sa_iterfunc_t)(void *hdr, void *addr, sa_attr_type_t, 128 uint16_t length, int length_idx, boolean_t, void *userp); 129 130static int sa_build_index(sa_handle_t *hdl, sa_buf_type_t buftype); 131static void sa_idx_tab_hold(objset_t *os, sa_idx_tab_t *idx_tab); 132static void *sa_find_idx_tab(objset_t *os, dmu_object_type_t bonustype, 133 void *data); 134static void sa_idx_tab_rele(objset_t *os, void *arg); 135static void sa_copy_data(sa_data_locator_t *func, void *start, void *target, 136 int buflen); 137static int sa_modify_attrs(sa_handle_t *hdl, sa_attr_type_t newattr, 138 sa_data_op_t action, sa_data_locator_t *locator, void *datastart, 139 uint16_t buflen, dmu_tx_t *tx); 140 141arc_byteswap_func_t *sa_bswap_table[] = { 142 byteswap_uint64_array, 143 byteswap_uint32_array, 144 byteswap_uint16_array, 145 byteswap_uint8_array, 146 zfs_acl_byteswap, 147}; 148 149#define SA_COPY_DATA(f, s, t, l) \ 150 { \ 151 if (f == NULL) { \ 152 if (l == 8) { \ 153 *(uint64_t *)t = *(uint64_t *)s; \ 154 } else if (l == 16) { \ 155 *(uint64_t *)t = *(uint64_t *)s; \ 156 *(uint64_t *)((uintptr_t)t + 8) = \ 157 *(uint64_t *)((uintptr_t)s + 8); \ 158 } else { \ 159 bcopy(s, t, l); \ 160 } \ 161 } else \ 162 sa_copy_data(f, s, t, l); \ 163 } 164 165/* 166 * This table is fixed and cannot be changed. Its purpose is to 167 * allow the SA code to work with both old/new ZPL file systems. 168 * It contains the list of legacy attributes. These attributes aren't 169 * stored in the "attribute" registry zap objects, since older ZPL file systems 170 * won't have the registry. Only objsets of type ZFS_TYPE_FILESYSTEM will 171 * use this static table. 172 */ 173sa_attr_reg_t sa_legacy_attrs[] = { 174 {"ZPL_ATIME", sizeof (uint64_t) * 2, SA_UINT64_ARRAY, 0}, 175 {"ZPL_MTIME", sizeof (uint64_t) * 2, SA_UINT64_ARRAY, 1}, 176 {"ZPL_CTIME", sizeof (uint64_t) * 2, SA_UINT64_ARRAY, 2}, 177 {"ZPL_CRTIME", sizeof (uint64_t) * 2, SA_UINT64_ARRAY, 3}, 178 {"ZPL_GEN", sizeof (uint64_t), SA_UINT64_ARRAY, 4}, 179 {"ZPL_MODE", sizeof (uint64_t), SA_UINT64_ARRAY, 5}, 180 {"ZPL_SIZE", sizeof (uint64_t), SA_UINT64_ARRAY, 6}, 181 {"ZPL_PARENT", sizeof (uint64_t), SA_UINT64_ARRAY, 7}, 182 {"ZPL_LINKS", sizeof (uint64_t), SA_UINT64_ARRAY, 8}, 183 {"ZPL_XATTR", sizeof (uint64_t), SA_UINT64_ARRAY, 9}, 184 {"ZPL_RDEV", sizeof (uint64_t), SA_UINT64_ARRAY, 10}, 185 {"ZPL_FLAGS", sizeof (uint64_t), SA_UINT64_ARRAY, 11}, 186 {"ZPL_UID", sizeof (uint64_t), SA_UINT64_ARRAY, 12}, 187 {"ZPL_GID", sizeof (uint64_t), SA_UINT64_ARRAY, 13}, 188 {"ZPL_PAD", sizeof (uint64_t) * 4, SA_UINT64_ARRAY, 14}, 189 {"ZPL_ZNODE_ACL", 88, SA_UINT8_ARRAY, 15}, 190}; 191 192/* 193 * This is only used for objects of type DMU_OT_ZNODE 194 */ 195sa_attr_type_t sa_legacy_zpl_layout[] = { 196 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 197}; 198 199/* 200 * Special dummy layout used for buffers with no attributes. 201 */ 202sa_attr_type_t sa_dummy_zpl_layout[] = { 0 }; 203 204static int sa_legacy_attr_count = 16; 205static kmem_cache_t *sa_cache = NULL; 206 207/*ARGSUSED*/ 208static int 209sa_cache_constructor(void *buf, void *unused, int kmflag) 210{ 211 sa_handle_t *hdl = buf; 212 213 hdl->sa_bonus_tab = NULL; 214 hdl->sa_spill_tab = NULL; 215 hdl->sa_os = NULL; 216 hdl->sa_userp = NULL; 217 hdl->sa_bonus = NULL; 218 hdl->sa_spill = NULL; 219 mutex_init(&hdl->sa_lock, NULL, MUTEX_DEFAULT, NULL); 220 return (0); 221} 222 223/*ARGSUSED*/ 224static void 225sa_cache_destructor(void *buf, void *unused) 226{ 227 sa_handle_t *hdl = buf; 228 mutex_destroy(&hdl->sa_lock); 229} 230 231void 232sa_cache_init(void) 233{ 234 sa_cache = kmem_cache_create("sa_cache", 235 sizeof (sa_handle_t), 0, sa_cache_constructor, 236 sa_cache_destructor, NULL, NULL, NULL, 0); 237} 238 239void 240sa_cache_fini(void) 241{ 242 if (sa_cache) 243 kmem_cache_destroy(sa_cache); 244} 245 246static int 247layout_num_compare(const void *arg1, const void *arg2) 248{ 249 const sa_lot_t *node1 = arg1; 250 const sa_lot_t *node2 = arg2; 251 252 if (node1->lot_num > node2->lot_num) 253 return (1); 254 else if (node1->lot_num < node2->lot_num) 255 return (-1); 256 return (0); 257} 258 259static int 260layout_hash_compare(const void *arg1, const void *arg2) 261{ 262 const sa_lot_t *node1 = arg1; 263 const sa_lot_t *node2 = arg2; 264 265 if (node1->lot_hash > node2->lot_hash) 266 return (1); 267 if (node1->lot_hash < node2->lot_hash) 268 return (-1); 269 if (node1->lot_instance > node2->lot_instance) 270 return (1); 271 if (node1->lot_instance < node2->lot_instance) 272 return (-1); 273 return (0); 274} 275 276boolean_t 277sa_layout_equal(sa_lot_t *tbf, sa_attr_type_t *attrs, int count) 278{ 279 int i; 280 281 if (count != tbf->lot_attr_count) 282 return (1); 283 284 for (i = 0; i != count; i++) { 285 if (attrs[i] != tbf->lot_attrs[i]) 286 return (1); 287 } 288 return (0); 289} 290 291#define SA_ATTR_HASH(attr) (zfs_crc64_table[(-1ULL ^ attr) & 0xFF]) 292 293static uint64_t 294sa_layout_info_hash(sa_attr_type_t *attrs, int attr_count) 295{ 296 int i; 297 uint64_t crc = -1ULL; 298 299 for (i = 0; i != attr_count; i++) 300 crc ^= SA_ATTR_HASH(attrs[i]); 301 302 return (crc); 303} 304 305static int 306sa_get_spill(sa_handle_t *hdl) 307{ 308 int rc; 309 if (hdl->sa_spill == NULL) { 310 if ((rc = dmu_spill_hold_existing(hdl->sa_bonus, NULL, 311 &hdl->sa_spill)) == 0) 312 VERIFY(0 == sa_build_index(hdl, SA_SPILL)); 313 } else { 314 rc = 0; 315 } 316 317 return (rc); 318} 319 320/* 321 * Main attribute lookup/update function 322 * returns 0 for success or non zero for failures 323 * 324 * Operates on bulk array, first failure will abort further processing 325 */ 326int 327sa_attr_op(sa_handle_t *hdl, sa_bulk_attr_t *bulk, int count, 328 sa_data_op_t data_op, dmu_tx_t *tx) 329{ 330 sa_os_t *sa = hdl->sa_os->os_sa; 331 int i; 332 int error = 0; 333 sa_buf_type_t buftypes; 334 335 buftypes = 0; 336 337 ASSERT(count > 0); 338 for (i = 0; i != count; i++) { 339 ASSERT(bulk[i].sa_attr <= hdl->sa_os->os_sa->sa_num_attrs); 340 341 bulk[i].sa_addr = NULL; 342 /* First check the bonus buffer */ 343 344 if (hdl->sa_bonus_tab && TOC_ATTR_PRESENT( 345 hdl->sa_bonus_tab->sa_idx_tab[bulk[i].sa_attr])) { 346 SA_ATTR_INFO(sa, hdl->sa_bonus_tab, 347 SA_GET_HDR(hdl, SA_BONUS), 348 bulk[i].sa_attr, bulk[i], SA_BONUS, hdl); 349 if (tx && !(buftypes & SA_BONUS)) { 350 dmu_buf_will_dirty(hdl->sa_bonus, tx); 351 buftypes |= SA_BONUS; 352 } 353 } 354 if (bulk[i].sa_addr == NULL && 355 ((error = sa_get_spill(hdl)) == 0)) { 356 if (TOC_ATTR_PRESENT( 357 hdl->sa_spill_tab->sa_idx_tab[bulk[i].sa_attr])) { 358 SA_ATTR_INFO(sa, hdl->sa_spill_tab, 359 SA_GET_HDR(hdl, SA_SPILL), 360 bulk[i].sa_attr, bulk[i], SA_SPILL, hdl); 361 if (tx && !(buftypes & SA_SPILL) && 362 bulk[i].sa_size == bulk[i].sa_length) { 363 dmu_buf_will_dirty(hdl->sa_spill, tx); 364 buftypes |= SA_SPILL; 365 } 366 } 367 } 368 if (error && error != ENOENT) { 369 return ((error == ECKSUM) ? EIO : error); 370 } 371 372 switch (data_op) { 373 case SA_LOOKUP: 374 if (bulk[i].sa_addr == NULL) 375 return (SET_ERROR(ENOENT)); 376 if (bulk[i].sa_data) { 377 SA_COPY_DATA(bulk[i].sa_data_func, 378 bulk[i].sa_addr, bulk[i].sa_data, 379 bulk[i].sa_size); 380 } 381 continue; 382 383 case SA_UPDATE: 384 /* existing rewrite of attr */ 385 if (bulk[i].sa_addr && 386 bulk[i].sa_size == bulk[i].sa_length) { 387 SA_COPY_DATA(bulk[i].sa_data_func, 388 bulk[i].sa_data, bulk[i].sa_addr, 389 bulk[i].sa_length); 390 continue; 391 } else if (bulk[i].sa_addr) { /* attr size change */ 392 error = sa_modify_attrs(hdl, bulk[i].sa_attr, 393 SA_REPLACE, bulk[i].sa_data_func, 394 bulk[i].sa_data, bulk[i].sa_length, tx); 395 } else { /* adding new attribute */ 396 error = sa_modify_attrs(hdl, bulk[i].sa_attr, 397 SA_ADD, bulk[i].sa_data_func, 398 bulk[i].sa_data, bulk[i].sa_length, tx); 399 } 400 if (error) 401 return (error); 402 break; 403 } 404 } 405 return (error); 406} 407 408static sa_lot_t * 409sa_add_layout_entry(objset_t *os, sa_attr_type_t *attrs, int attr_count, 410 uint64_t lot_num, uint64_t hash, boolean_t zapadd, dmu_tx_t *tx) 411{ 412 sa_os_t *sa = os->os_sa; 413 sa_lot_t *tb, *findtb; 414 int i; 415 avl_index_t loc; 416 417 ASSERT(MUTEX_HELD(&sa->sa_lock)); 418 tb = kmem_zalloc(sizeof (sa_lot_t), KM_SLEEP); 419 tb->lot_attr_count = attr_count; 420 tb->lot_attrs = kmem_alloc(sizeof (sa_attr_type_t) * attr_count, 421 KM_SLEEP); 422 bcopy(attrs, tb->lot_attrs, sizeof (sa_attr_type_t) * attr_count); 423 tb->lot_num = lot_num; 424 tb->lot_hash = hash; 425 tb->lot_instance = 0; 426 427 if (zapadd) { 428 char attr_name[8]; 429 430 if (sa->sa_layout_attr_obj == 0) { 431 sa->sa_layout_attr_obj = zap_create_link(os, 432 DMU_OT_SA_ATTR_LAYOUTS, 433 sa->sa_master_obj, SA_LAYOUTS, tx); 434 } 435 436 (void) snprintf(attr_name, sizeof (attr_name), 437 "%d", (int)lot_num); 438 VERIFY(0 == zap_update(os, os->os_sa->sa_layout_attr_obj, 439 attr_name, 2, attr_count, attrs, tx)); 440 } 441 442 list_create(&tb->lot_idx_tab, sizeof (sa_idx_tab_t), 443 offsetof(sa_idx_tab_t, sa_next)); 444 445 for (i = 0; i != attr_count; i++) { 446 if (sa->sa_attr_table[tb->lot_attrs[i]].sa_length == 0) 447 tb->lot_var_sizes++; 448 } 449 450 avl_add(&sa->sa_layout_num_tree, tb); 451 452 /* verify we don't have a hash collision */ 453 if ((findtb = avl_find(&sa->sa_layout_hash_tree, tb, &loc)) != NULL) { 454 for (; findtb && findtb->lot_hash == hash; 455 findtb = AVL_NEXT(&sa->sa_layout_hash_tree, findtb)) { 456 if (findtb->lot_instance != tb->lot_instance) 457 break; 458 tb->lot_instance++; 459 } 460 } 461 avl_add(&sa->sa_layout_hash_tree, tb); 462 return (tb); 463} 464 465static void 466sa_find_layout(objset_t *os, uint64_t hash, sa_attr_type_t *attrs, 467 int count, dmu_tx_t *tx, sa_lot_t **lot) 468{ 469 sa_lot_t *tb, tbsearch; 470 avl_index_t loc; 471 sa_os_t *sa = os->os_sa; 472 boolean_t found = B_FALSE; 473 474 mutex_enter(&sa->sa_lock); 475 tbsearch.lot_hash = hash; 476 tbsearch.lot_instance = 0; 477 tb = avl_find(&sa->sa_layout_hash_tree, &tbsearch, &loc); 478 if (tb) { 479 for (; tb && tb->lot_hash == hash; 480 tb = AVL_NEXT(&sa->sa_layout_hash_tree, tb)) { 481 if (sa_layout_equal(tb, attrs, count) == 0) { 482 found = B_TRUE; 483 break; 484 } 485 } 486 } 487 if (!found) { 488 tb = sa_add_layout_entry(os, attrs, count, 489 avl_numnodes(&sa->sa_layout_num_tree), hash, B_TRUE, tx); 490 } 491 mutex_exit(&sa->sa_lock); 492 *lot = tb; 493} 494 495static int 496sa_resize_spill(sa_handle_t *hdl, uint32_t size, dmu_tx_t *tx) 497{ 498 int error; 499 uint32_t blocksize; 500 501 if (size == 0) { 502 blocksize = SPA_MINBLOCKSIZE; 503 } else if (size > SPA_OLD_MAXBLOCKSIZE) { 504 ASSERT(0); 505 return (SET_ERROR(EFBIG)); 506 } else { 507 blocksize = P2ROUNDUP_TYPED(size, SPA_MINBLOCKSIZE, uint32_t); 508 } 509 510 error = dbuf_spill_set_blksz(hdl->sa_spill, blocksize, tx); 511 ASSERT(error == 0); 512 return (error); 513} 514 515static void 516sa_copy_data(sa_data_locator_t *func, void *datastart, void *target, int buflen) 517{ 518 if (func == NULL) { 519 bcopy(datastart, target, buflen); 520 } else { 521 boolean_t start; 522 int bytes; 523 void *dataptr; 524 void *saptr = target; 525 uint32_t length; 526 527 start = B_TRUE; 528 bytes = 0; 529 while (bytes < buflen) { 530 func(&dataptr, &length, buflen, start, datastart); 531 bcopy(dataptr, saptr, length); 532 saptr = (void *)((caddr_t)saptr + length); 533 bytes += length; 534 start = B_FALSE; 535 } 536 } 537} 538 539/* 540 * Determine several different sizes 541 * first the sa header size 542 * the number of bytes to be stored 543 * if spill would occur the index in the attribute array is returned 544 * 545 * the boolean will_spill will be set when spilling is necessary. It 546 * is only set when the buftype is SA_BONUS 547 */ 548static int 549sa_find_sizes(sa_os_t *sa, sa_bulk_attr_t *attr_desc, int attr_count, 550 dmu_buf_t *db, sa_buf_type_t buftype, int *index, int *total, 551 boolean_t *will_spill) 552{ 553 int var_size = 0; 554 int i; 555 int j = -1; 556 int full_space; 557 int hdrsize; 558 boolean_t done = B_FALSE; 559 560 if (buftype == SA_BONUS && sa->sa_force_spill) { 561 *total = 0; 562 *index = 0; 563 *will_spill = B_TRUE; 564 return (0); 565 } 566 567 *index = -1; 568 *total = 0; 569 570 if (buftype == SA_BONUS) 571 *will_spill = B_FALSE; 572 573 hdrsize = (SA_BONUSTYPE_FROM_DB(db) == DMU_OT_ZNODE) ? 0 : 574 sizeof (sa_hdr_phys_t); 575 576 full_space = (buftype == SA_BONUS) ? DN_MAX_BONUSLEN : db->db_size; 577 ASSERT(IS_P2ALIGNED(full_space, 8)); 578 579 for (i = 0; i != attr_count; i++) { 580 boolean_t is_var_sz; 581 582 *total = P2ROUNDUP(*total, 8); 583 *total += attr_desc[i].sa_length; 584 if (done) 585 goto next; 586 587 is_var_sz = (SA_REGISTERED_LEN(sa, attr_desc[i].sa_attr) == 0); 588 if (is_var_sz) { 589 var_size++; 590 } 591 592 if (is_var_sz && var_size > 1) { 593 if (P2ROUNDUP(hdrsize + sizeof (uint16_t), 8) + 594 *total < full_space) { 595 /* 596 * Account for header space used by array of 597 * optional sizes of variable-length attributes. 598 * Record the index in case this increase needs 599 * to be reversed due to spill-over. 600 */ 601 hdrsize += sizeof (uint16_t); 602 j = i; 603 } else { 604 done = B_TRUE; 605 *index = i; 606 if (buftype == SA_BONUS) 607 *will_spill = B_TRUE; 608 continue; 609 } 610 } 611 612 /* 613 * find index of where spill *could* occur. 614 * Then continue to count of remainder attribute 615 * space. The sum is used later for sizing bonus 616 * and spill buffer. 617 */ 618 if (buftype == SA_BONUS && *index == -1 && 619 (*total + P2ROUNDUP(hdrsize, 8)) > 620 (full_space - sizeof (blkptr_t))) { 621 *index = i; 622 done = B_TRUE; 623 } 624 625next: 626 if ((*total + P2ROUNDUP(hdrsize, 8)) > full_space && 627 buftype == SA_BONUS) 628 *will_spill = B_TRUE; 629 } 630 631 /* 632 * j holds the index of the last variable-sized attribute for 633 * which hdrsize was increased. Reverse the increase if that 634 * attribute will be relocated to the spill block. 635 */ 636 if (*will_spill && j == *index) 637 hdrsize -= sizeof (uint16_t); 638 639 hdrsize = P2ROUNDUP(hdrsize, 8); 640 return (hdrsize); 641} 642 643#define BUF_SPACE_NEEDED(total, header) (total + header) 644 645/* 646 * Find layout that corresponds to ordering of attributes 647 * If not found a new layout number is created and added to 648 * persistent layout tables. 649 */ 650static int 651sa_build_layouts(sa_handle_t *hdl, sa_bulk_attr_t *attr_desc, int attr_count, 652 dmu_tx_t *tx) 653{ 654 sa_os_t *sa = hdl->sa_os->os_sa; 655 uint64_t hash; 656 sa_buf_type_t buftype; 657 sa_hdr_phys_t *sahdr; 658 void *data_start; 659 int buf_space; 660 sa_attr_type_t *attrs, *attrs_start; 661 int i, lot_count; 662 int hdrsize; 663 int spillhdrsize = 0; 664 int used; 665 dmu_object_type_t bonustype; 666 sa_lot_t *lot; 667 int len_idx; 668 int spill_used; 669 boolean_t spilling; 670 671 dmu_buf_will_dirty(hdl->sa_bonus, tx); 672 bonustype = SA_BONUSTYPE_FROM_DB(hdl->sa_bonus); 673 674 /* first determine bonus header size and sum of all attributes */ 675 hdrsize = sa_find_sizes(sa, attr_desc, attr_count, hdl->sa_bonus, 676 SA_BONUS, &i, &used, &spilling); 677 678 if (used > SPA_OLD_MAXBLOCKSIZE) 679 return (SET_ERROR(EFBIG)); 680 681 VERIFY(0 == dmu_set_bonus(hdl->sa_bonus, spilling ? 682 MIN(DN_MAX_BONUSLEN - sizeof (blkptr_t), used + hdrsize) : 683 used + hdrsize, tx)); 684 685 ASSERT((bonustype == DMU_OT_ZNODE && spilling == 0) || 686 bonustype == DMU_OT_SA); 687 688 /* setup and size spill buffer when needed */ 689 if (spilling) { 690 boolean_t dummy; 691 692 if (hdl->sa_spill == NULL) { 693 VERIFY(dmu_spill_hold_by_bonus(hdl->sa_bonus, NULL, 694 &hdl->sa_spill) == 0); 695 } 696 dmu_buf_will_dirty(hdl->sa_spill, tx); 697 698 spillhdrsize = sa_find_sizes(sa, &attr_desc[i], 699 attr_count - i, hdl->sa_spill, SA_SPILL, &i, 700 &spill_used, &dummy); 701 702 if (spill_used > SPA_OLD_MAXBLOCKSIZE) 703 return (SET_ERROR(EFBIG)); 704 705 buf_space = hdl->sa_spill->db_size - spillhdrsize; 706 if (BUF_SPACE_NEEDED(spill_used, spillhdrsize) > 707 hdl->sa_spill->db_size) 708 VERIFY(0 == sa_resize_spill(hdl, 709 BUF_SPACE_NEEDED(spill_used, spillhdrsize), tx)); 710 } 711 712 /* setup starting pointers to lay down data */ 713 data_start = (void *)((uintptr_t)hdl->sa_bonus->db_data + hdrsize); 714 sahdr = (sa_hdr_phys_t *)hdl->sa_bonus->db_data; 715 buftype = SA_BONUS; 716 717 if (spilling) 718 buf_space = (sa->sa_force_spill) ? 719 0 : SA_BLKPTR_SPACE - hdrsize; 720 else 721 buf_space = hdl->sa_bonus->db_size - hdrsize; 722 723 attrs_start = attrs = kmem_alloc(sizeof (sa_attr_type_t) * attr_count, 724 KM_SLEEP); 725 lot_count = 0; 726 727 for (i = 0, len_idx = 0, hash = -1ULL; i != attr_count; i++) { 728 uint16_t length; 729 730 ASSERT(IS_P2ALIGNED(data_start, 8)); 731 ASSERT(IS_P2ALIGNED(buf_space, 8)); 732 attrs[i] = attr_desc[i].sa_attr; 733 length = SA_REGISTERED_LEN(sa, attrs[i]); 734 if (length == 0) 735 length = attr_desc[i].sa_length; 736 else 737 VERIFY(length == attr_desc[i].sa_length); 738 739 if (buf_space < length) { /* switch to spill buffer */ 740 VERIFY(spilling); 741 VERIFY(bonustype == DMU_OT_SA); 742 if (buftype == SA_BONUS && !sa->sa_force_spill) { 743 sa_find_layout(hdl->sa_os, hash, attrs_start, 744 lot_count, tx, &lot); 745 SA_SET_HDR(sahdr, lot->lot_num, hdrsize); 746 } 747 748 buftype = SA_SPILL; 749 hash = -1ULL; 750 len_idx = 0; 751 752 sahdr = (sa_hdr_phys_t *)hdl->sa_spill->db_data; 753 sahdr->sa_magic = SA_MAGIC; 754 data_start = (void *)((uintptr_t)sahdr + 755 spillhdrsize); 756 attrs_start = &attrs[i]; 757 buf_space = hdl->sa_spill->db_size - spillhdrsize; 758 lot_count = 0; 759 } 760 hash ^= SA_ATTR_HASH(attrs[i]); 761 attr_desc[i].sa_addr = data_start; 762 attr_desc[i].sa_size = length; 763 SA_COPY_DATA(attr_desc[i].sa_data_func, attr_desc[i].sa_data, 764 data_start, length); 765 if (sa->sa_attr_table[attrs[i]].sa_length == 0) { 766 sahdr->sa_lengths[len_idx++] = length; 767 } 768 VERIFY((uintptr_t)data_start % 8 == 0); 769 data_start = (void *)P2ROUNDUP(((uintptr_t)data_start + 770 length), 8); 771 buf_space -= P2ROUNDUP(length, 8); 772 lot_count++; 773 } 774 775 sa_find_layout(hdl->sa_os, hash, attrs_start, lot_count, tx, &lot); 776 777 /* 778 * Verify that old znodes always have layout number 0. 779 * Must be DMU_OT_SA for arbitrary layouts 780 */ 781 VERIFY((bonustype == DMU_OT_ZNODE && lot->lot_num == 0) || 782 (bonustype == DMU_OT_SA && lot->lot_num > 1)); 783 784 if (bonustype == DMU_OT_SA) { 785 SA_SET_HDR(sahdr, lot->lot_num, 786 buftype == SA_BONUS ? hdrsize : spillhdrsize); 787 } 788 789 kmem_free(attrs, sizeof (sa_attr_type_t) * attr_count); 790 if (hdl->sa_bonus_tab) { 791 sa_idx_tab_rele(hdl->sa_os, hdl->sa_bonus_tab); 792 hdl->sa_bonus_tab = NULL; 793 } 794 if (!sa->sa_force_spill) 795 VERIFY(0 == sa_build_index(hdl, SA_BONUS)); 796 if (hdl->sa_spill) { 797 sa_idx_tab_rele(hdl->sa_os, hdl->sa_spill_tab); 798 if (!spilling) { 799 /* 800 * remove spill block that is no longer needed. 801 */ 802 dmu_buf_rele(hdl->sa_spill, NULL); 803 hdl->sa_spill = NULL; 804 hdl->sa_spill_tab = NULL; 805 VERIFY(0 == dmu_rm_spill(hdl->sa_os, 806 sa_handle_object(hdl), tx)); 807 } else { 808 VERIFY(0 == sa_build_index(hdl, SA_SPILL)); 809 } 810 } 811 812 return (0); 813} 814 815static void 816sa_free_attr_table(sa_os_t *sa) 817{ 818 int i; 819 820 if (sa->sa_attr_table == NULL) 821 return; 822 823 for (i = 0; i != sa->sa_num_attrs; i++) { 824 if (sa->sa_attr_table[i].sa_name) 825 kmem_free(sa->sa_attr_table[i].sa_name, 826 strlen(sa->sa_attr_table[i].sa_name) + 1); 827 } 828 829 kmem_free(sa->sa_attr_table, 830 sizeof (sa_attr_table_t) * sa->sa_num_attrs); 831 832 sa->sa_attr_table = NULL; 833} 834 835static int 836sa_attr_table_setup(objset_t *os, sa_attr_reg_t *reg_attrs, int count) 837{ 838 sa_os_t *sa = os->os_sa; 839 uint64_t sa_attr_count = 0; 840 uint64_t sa_reg_count = 0; 841 int error = 0; 842 uint64_t attr_value; 843 sa_attr_table_t *tb; 844 zap_cursor_t zc; 845 zap_attribute_t za; 846 int registered_count = 0; 847 int i; 848 dmu_objset_type_t ostype = dmu_objset_type(os); 849 850 sa->sa_user_table = 851 kmem_zalloc(count * sizeof (sa_attr_type_t), KM_SLEEP); 852 sa->sa_user_table_sz = count * sizeof (sa_attr_type_t); 853 854 if (sa->sa_reg_attr_obj != 0) { 855 error = zap_count(os, sa->sa_reg_attr_obj, 856 &sa_attr_count); 857 858 /* 859 * Make sure we retrieved a count and that it isn't zero 860 */ 861 if (error || (error == 0 && sa_attr_count == 0)) { 862 if (error == 0) 863 error = SET_ERROR(EINVAL); 864 goto bail; 865 } 866 sa_reg_count = sa_attr_count; 867 } 868 869 if (ostype == DMU_OST_ZFS && sa_attr_count == 0) 870 sa_attr_count += sa_legacy_attr_count; 871 872 /* Allocate attribute numbers for attributes that aren't registered */ 873 for (i = 0; i != count; i++) { 874 boolean_t found = B_FALSE; 875 int j; 876 877 if (ostype == DMU_OST_ZFS) { 878 for (j = 0; j != sa_legacy_attr_count; j++) { 879 if (strcmp(reg_attrs[i].sa_name, 880 sa_legacy_attrs[j].sa_name) == 0) { 881 sa->sa_user_table[i] = 882 sa_legacy_attrs[j].sa_attr; 883 found = B_TRUE; 884 } 885 } 886 } 887 if (found) 888 continue; 889 890 if (sa->sa_reg_attr_obj) 891 error = zap_lookup(os, sa->sa_reg_attr_obj, 892 reg_attrs[i].sa_name, 8, 1, &attr_value); 893 else 894 error = SET_ERROR(ENOENT); 895 switch (error) { 896 case ENOENT: 897 sa->sa_user_table[i] = (sa_attr_type_t)sa_attr_count; 898 sa_attr_count++; 899 break; 900 case 0: 901 sa->sa_user_table[i] = ATTR_NUM(attr_value); 902 break; 903 default: 904 goto bail; 905 } 906 } 907 908 sa->sa_num_attrs = sa_attr_count; 909 tb = sa->sa_attr_table = 910 kmem_zalloc(sizeof (sa_attr_table_t) * sa_attr_count, KM_SLEEP); 911 912 /* 913 * Attribute table is constructed from requested attribute list, 914 * previously foreign registered attributes, and also the legacy 915 * ZPL set of attributes. 916 */ 917 918 if (sa->sa_reg_attr_obj) { 919 for (zap_cursor_init(&zc, os, sa->sa_reg_attr_obj); 920 (error = zap_cursor_retrieve(&zc, &za)) == 0; 921 zap_cursor_advance(&zc)) { 922 uint64_t value; 923 value = za.za_first_integer; 924 925 registered_count++; 926 tb[ATTR_NUM(value)].sa_attr = ATTR_NUM(value); 927 tb[ATTR_NUM(value)].sa_length = ATTR_LENGTH(value); 928 tb[ATTR_NUM(value)].sa_byteswap = ATTR_BSWAP(value); 929 tb[ATTR_NUM(value)].sa_registered = B_TRUE; 930 931 if (tb[ATTR_NUM(value)].sa_name) { 932 continue; 933 } 934 tb[ATTR_NUM(value)].sa_name = 935 kmem_zalloc(strlen(za.za_name) +1, KM_SLEEP); 936 (void) strlcpy(tb[ATTR_NUM(value)].sa_name, za.za_name, 937 strlen(za.za_name) +1); 938 } 939 zap_cursor_fini(&zc); 940 /* 941 * Make sure we processed the correct number of registered 942 * attributes 943 */ 944 if (registered_count != sa_reg_count) { 945 ASSERT(error != 0); 946 goto bail; 947 } 948 949 } 950 951 if (ostype == DMU_OST_ZFS) { 952 for (i = 0; i != sa_legacy_attr_count; i++) { 953 if (tb[i].sa_name) 954 continue; 955 tb[i].sa_attr = sa_legacy_attrs[i].sa_attr; 956 tb[i].sa_length = sa_legacy_attrs[i].sa_length; 957 tb[i].sa_byteswap = sa_legacy_attrs[i].sa_byteswap; 958 tb[i].sa_registered = B_FALSE; 959 tb[i].sa_name = 960 kmem_zalloc(strlen(sa_legacy_attrs[i].sa_name) +1, 961 KM_SLEEP); 962 (void) strlcpy(tb[i].sa_name, 963 sa_legacy_attrs[i].sa_name, 964 strlen(sa_legacy_attrs[i].sa_name) + 1); 965 } 966 } 967 968 for (i = 0; i != count; i++) { 969 sa_attr_type_t attr_id; 970 971 attr_id = sa->sa_user_table[i]; 972 if (tb[attr_id].sa_name) 973 continue; 974 975 tb[attr_id].sa_length = reg_attrs[i].sa_length; 976 tb[attr_id].sa_byteswap = reg_attrs[i].sa_byteswap; 977 tb[attr_id].sa_attr = attr_id; 978 tb[attr_id].sa_name = 979 kmem_zalloc(strlen(reg_attrs[i].sa_name) + 1, KM_SLEEP); 980 (void) strlcpy(tb[attr_id].sa_name, reg_attrs[i].sa_name, 981 strlen(reg_attrs[i].sa_name) + 1); 982 } 983 984 sa->sa_need_attr_registration = 985 (sa_attr_count != registered_count); 986 987 return (0); 988bail: 989 kmem_free(sa->sa_user_table, count * sizeof (sa_attr_type_t)); 990 sa->sa_user_table = NULL; 991 sa_free_attr_table(sa); 992 return ((error != 0) ? error : EINVAL); 993} 994 995int 996sa_setup(objset_t *os, uint64_t sa_obj, sa_attr_reg_t *reg_attrs, int count, 997 sa_attr_type_t **user_table) 998{ 999 zap_cursor_t zc; 1000 zap_attribute_t za; 1001 sa_os_t *sa; 1002 dmu_objset_type_t ostype = dmu_objset_type(os); 1003 sa_attr_type_t *tb; 1004 int error; 1005 1006 mutex_enter(&os->os_user_ptr_lock); 1007 if (os->os_sa) { 1008 mutex_enter(&os->os_sa->sa_lock); 1009 mutex_exit(&os->os_user_ptr_lock); 1010 tb = os->os_sa->sa_user_table; 1011 mutex_exit(&os->os_sa->sa_lock); 1012 *user_table = tb; 1013 return (0); 1014 } 1015 1016 sa = kmem_zalloc(sizeof (sa_os_t), KM_SLEEP); 1017 mutex_init(&sa->sa_lock, NULL, MUTEX_DEFAULT, NULL); 1018 sa->sa_master_obj = sa_obj; 1019 1020 os->os_sa = sa; 1021 mutex_enter(&sa->sa_lock); 1022 mutex_exit(&os->os_user_ptr_lock); 1023 avl_create(&sa->sa_layout_num_tree, layout_num_compare, 1024 sizeof (sa_lot_t), offsetof(sa_lot_t, lot_num_node)); 1025 avl_create(&sa->sa_layout_hash_tree, layout_hash_compare, 1026 sizeof (sa_lot_t), offsetof(sa_lot_t, lot_hash_node)); 1027 1028 if (sa_obj) { 1029 error = zap_lookup(os, sa_obj, SA_LAYOUTS, 1030 8, 1, &sa->sa_layout_attr_obj); 1031 if (error != 0 && error != ENOENT) 1032 goto fail; 1033 error = zap_lookup(os, sa_obj, SA_REGISTRY, 1034 8, 1, &sa->sa_reg_attr_obj); 1035 if (error != 0 && error != ENOENT) 1036 goto fail; 1037 } 1038 1039 if ((error = sa_attr_table_setup(os, reg_attrs, count)) != 0) 1040 goto fail; 1041 1042 if (sa->sa_layout_attr_obj != 0) { 1043 uint64_t layout_count; 1044 1045 error = zap_count(os, sa->sa_layout_attr_obj, 1046 &layout_count); 1047 1048 /* 1049 * Layout number count should be > 0 1050 */ 1051 if (error || (error == 0 && layout_count == 0)) { 1052 if (error == 0) 1053 error = SET_ERROR(EINVAL); 1054 goto fail; 1055 } 1056 1057 for (zap_cursor_init(&zc, os, sa->sa_layout_attr_obj); 1058 (error = zap_cursor_retrieve(&zc, &za)) == 0; 1059 zap_cursor_advance(&zc)) { 1060 sa_attr_type_t *lot_attrs; 1061 uint64_t lot_num; 1062 1063 lot_attrs = kmem_zalloc(sizeof (sa_attr_type_t) * 1064 za.za_num_integers, KM_SLEEP); 1065 1066 if ((error = (zap_lookup(os, sa->sa_layout_attr_obj, 1067 za.za_name, 2, za.za_num_integers, 1068 lot_attrs))) != 0) { 1069 kmem_free(lot_attrs, sizeof (sa_attr_type_t) * 1070 za.za_num_integers); 1071 break; 1072 } 1073 VERIFY(ddi_strtoull(za.za_name, NULL, 10, 1074 (unsigned long long *)&lot_num) == 0); 1075 1076 (void) sa_add_layout_entry(os, lot_attrs, 1077 za.za_num_integers, lot_num, 1078 sa_layout_info_hash(lot_attrs, 1079 za.za_num_integers), B_FALSE, NULL); 1080 kmem_free(lot_attrs, sizeof (sa_attr_type_t) * 1081 za.za_num_integers); 1082 } 1083 zap_cursor_fini(&zc); 1084 1085 /* 1086 * Make sure layout count matches number of entries added 1087 * to AVL tree 1088 */ 1089 if (avl_numnodes(&sa->sa_layout_num_tree) != layout_count) { 1090 ASSERT(error != 0); 1091 goto fail; 1092 } 1093 } 1094 1095 /* Add special layout number for old ZNODES */ 1096 if (ostype == DMU_OST_ZFS) { 1097 (void) sa_add_layout_entry(os, sa_legacy_zpl_layout, 1098 sa_legacy_attr_count, 0, 1099 sa_layout_info_hash(sa_legacy_zpl_layout, 1100 sa_legacy_attr_count), B_FALSE, NULL); 1101 1102 (void) sa_add_layout_entry(os, sa_dummy_zpl_layout, 0, 1, 1103 0, B_FALSE, NULL); 1104 } 1105 *user_table = os->os_sa->sa_user_table; 1106 mutex_exit(&sa->sa_lock); 1107 return (0); 1108fail: 1109 os->os_sa = NULL; 1110 sa_free_attr_table(sa); 1111 if (sa->sa_user_table) 1112 kmem_free(sa->sa_user_table, sa->sa_user_table_sz); 1113 mutex_exit(&sa->sa_lock); 1114 avl_destroy(&sa->sa_layout_hash_tree); 1115 avl_destroy(&sa->sa_layout_num_tree); 1116 mutex_destroy(&sa->sa_lock); 1117 kmem_free(sa, sizeof (sa_os_t)); 1118 return ((error == ECKSUM) ? EIO : error); 1119} 1120 1121void 1122sa_tear_down(objset_t *os) 1123{ 1124 sa_os_t *sa = os->os_sa; 1125 sa_lot_t *layout; 1126 void *cookie; 1127 1128 kmem_free(sa->sa_user_table, sa->sa_user_table_sz); 1129 1130 /* Free up attr table */ 1131 1132 sa_free_attr_table(sa); 1133 1134 cookie = NULL; 1135 while (layout = avl_destroy_nodes(&sa->sa_layout_hash_tree, &cookie)) { 1136 sa_idx_tab_t *tab; 1137 while (tab = list_head(&layout->lot_idx_tab)) { 1138 ASSERT(refcount_count(&tab->sa_refcount)); 1139 sa_idx_tab_rele(os, tab); 1140 } 1141 } 1142 1143 cookie = NULL; 1144 while (layout = avl_destroy_nodes(&sa->sa_layout_num_tree, &cookie)) { 1145 kmem_free(layout->lot_attrs, 1146 sizeof (sa_attr_type_t) * layout->lot_attr_count); 1147 kmem_free(layout, sizeof (sa_lot_t)); 1148 } 1149 1150 avl_destroy(&sa->sa_layout_hash_tree); 1151 avl_destroy(&sa->sa_layout_num_tree); 1152 mutex_destroy(&sa->sa_lock); 1153 1154 kmem_free(sa, sizeof (sa_os_t)); 1155 os->os_sa = NULL; 1156} 1157 1158void 1159sa_build_idx_tab(void *hdr, void *attr_addr, sa_attr_type_t attr, 1160 uint16_t length, int length_idx, boolean_t var_length, void *userp) 1161{ 1162 sa_idx_tab_t *idx_tab = userp; 1163 1164 if (var_length) { 1165 ASSERT(idx_tab->sa_variable_lengths); 1166 idx_tab->sa_variable_lengths[length_idx] = length; 1167 } 1168 TOC_ATTR_ENCODE(idx_tab->sa_idx_tab[attr], length_idx, 1169 (uint32_t)((uintptr_t)attr_addr - (uintptr_t)hdr)); 1170} 1171 1172static void 1173sa_attr_iter(objset_t *os, sa_hdr_phys_t *hdr, dmu_object_type_t type, 1174 sa_iterfunc_t func, sa_lot_t *tab, void *userp) 1175{ 1176 void *data_start; 1177 sa_lot_t *tb = tab; 1178 sa_lot_t search; 1179 avl_index_t loc; 1180 sa_os_t *sa = os->os_sa; 1181 int i; 1182 uint16_t *length_start = NULL; 1183 uint8_t length_idx = 0; 1184 1185 if (tab == NULL) { 1186 search.lot_num = SA_LAYOUT_NUM(hdr, type); 1187 tb = avl_find(&sa->sa_layout_num_tree, &search, &loc); 1188 ASSERT(tb); 1189 } 1190 1191 if (IS_SA_BONUSTYPE(type)) { 1192 data_start = (void *)P2ROUNDUP(((uintptr_t)hdr + 1193 offsetof(sa_hdr_phys_t, sa_lengths) + 1194 (sizeof (uint16_t) * tb->lot_var_sizes)), 8); 1195 length_start = hdr->sa_lengths; 1196 } else { 1197 data_start = hdr; 1198 } 1199 1200 for (i = 0; i != tb->lot_attr_count; i++) { 1201 int attr_length, reg_length; 1202 uint8_t idx_len; 1203 1204 reg_length = sa->sa_attr_table[tb->lot_attrs[i]].sa_length; 1205 if (reg_length) { 1206 attr_length = reg_length; 1207 idx_len = 0; 1208 } else { 1209 attr_length = length_start[length_idx]; 1210 idx_len = length_idx++; 1211 } 1212 1213 func(hdr, data_start, tb->lot_attrs[i], attr_length, 1214 idx_len, reg_length == 0 ? B_TRUE : B_FALSE, userp); 1215 1216 data_start = (void *)P2ROUNDUP(((uintptr_t)data_start + 1217 attr_length), 8); 1218 } 1219} 1220 1221/*ARGSUSED*/ 1222void 1223sa_byteswap_cb(void *hdr, void *attr_addr, sa_attr_type_t attr, 1224 uint16_t length, int length_idx, boolean_t variable_length, void *userp) 1225{ 1226 sa_handle_t *hdl = userp; 1227 sa_os_t *sa = hdl->sa_os->os_sa; 1228 1229 sa_bswap_table[sa->sa_attr_table[attr].sa_byteswap](attr_addr, length); 1230} 1231 1232void 1233sa_byteswap(sa_handle_t *hdl, sa_buf_type_t buftype) 1234{ 1235 sa_hdr_phys_t *sa_hdr_phys = SA_GET_HDR(hdl, buftype); 1236 dmu_buf_impl_t *db; 1237 sa_os_t *sa = hdl->sa_os->os_sa; 1238 int num_lengths = 1; 1239 int i; 1240 1241 ASSERT(MUTEX_HELD(&sa->sa_lock)); 1242 if (sa_hdr_phys->sa_magic == SA_MAGIC) 1243 return; 1244 1245 db = SA_GET_DB(hdl, buftype); 1246 1247 if (buftype == SA_SPILL) { 1248 arc_release(db->db_buf, NULL); 1249 arc_buf_thaw(db->db_buf); 1250 } 1251 1252 sa_hdr_phys->sa_magic = BSWAP_32(sa_hdr_phys->sa_magic); 1253 sa_hdr_phys->sa_layout_info = BSWAP_16(sa_hdr_phys->sa_layout_info); 1254 1255 /* 1256 * Determine number of variable lenghts in header 1257 * The standard 8 byte header has one for free and a 1258 * 16 byte header would have 4 + 1; 1259 */ 1260 if (SA_HDR_SIZE(sa_hdr_phys) > 8) 1261 num_lengths += (SA_HDR_SIZE(sa_hdr_phys) - 8) >> 1; 1262 for (i = 0; i != num_lengths; i++) 1263 sa_hdr_phys->sa_lengths[i] = 1264 BSWAP_16(sa_hdr_phys->sa_lengths[i]); 1265 1266 sa_attr_iter(hdl->sa_os, sa_hdr_phys, DMU_OT_SA, 1267 sa_byteswap_cb, NULL, hdl); 1268 1269 if (buftype == SA_SPILL) 1270 arc_buf_freeze(((dmu_buf_impl_t *)hdl->sa_spill)->db_buf); 1271} 1272 1273static int 1274sa_build_index(sa_handle_t *hdl, sa_buf_type_t buftype) 1275{ 1276 sa_hdr_phys_t *sa_hdr_phys; 1277 dmu_buf_impl_t *db = SA_GET_DB(hdl, buftype); 1278 dmu_object_type_t bonustype = SA_BONUSTYPE_FROM_DB(db); 1279 sa_os_t *sa = hdl->sa_os->os_sa; 1280 sa_idx_tab_t *idx_tab; 1281 1282 sa_hdr_phys = SA_GET_HDR(hdl, buftype); 1283 1284 mutex_enter(&sa->sa_lock); 1285 1286 /* Do we need to byteswap? */ 1287 1288 /* only check if not old znode */ 1289 if (IS_SA_BONUSTYPE(bonustype) && sa_hdr_phys->sa_magic != SA_MAGIC && 1290 sa_hdr_phys->sa_magic != 0) { 1291 VERIFY(BSWAP_32(sa_hdr_phys->sa_magic) == SA_MAGIC); 1292 sa_byteswap(hdl, buftype); 1293 } 1294 1295 idx_tab = sa_find_idx_tab(hdl->sa_os, bonustype, sa_hdr_phys); 1296 1297 if (buftype == SA_BONUS) 1298 hdl->sa_bonus_tab = idx_tab; 1299 else 1300 hdl->sa_spill_tab = idx_tab; 1301 1302 mutex_exit(&sa->sa_lock); 1303 return (0); 1304} 1305 1306/*ARGSUSED*/ 1307void 1308sa_evict(dmu_buf_t *db, void *sap) 1309{ 1310 panic("evicting sa dbuf %p\n", (void *)db); 1311} 1312 1313static void 1314sa_idx_tab_rele(objset_t *os, void *arg) 1315{ 1316 sa_os_t *sa = os->os_sa; 1317 sa_idx_tab_t *idx_tab = arg; 1318 1319 if (idx_tab == NULL) 1320 return; 1321 1322 mutex_enter(&sa->sa_lock); 1323 if (refcount_remove(&idx_tab->sa_refcount, NULL) == 0) { 1324 list_remove(&idx_tab->sa_layout->lot_idx_tab, idx_tab); 1325 if (idx_tab->sa_variable_lengths) 1326 kmem_free(idx_tab->sa_variable_lengths, 1327 sizeof (uint16_t) * 1328 idx_tab->sa_layout->lot_var_sizes); 1329 refcount_destroy(&idx_tab->sa_refcount); 1330 kmem_free(idx_tab->sa_idx_tab, 1331 sizeof (uint32_t) * sa->sa_num_attrs); 1332 kmem_free(idx_tab, sizeof (sa_idx_tab_t)); 1333 } 1334 mutex_exit(&sa->sa_lock); 1335} 1336 1337static void 1338sa_idx_tab_hold(objset_t *os, sa_idx_tab_t *idx_tab) 1339{ 1340 sa_os_t *sa = os->os_sa; 1341 1342 ASSERT(MUTEX_HELD(&sa->sa_lock)); 1343 (void) refcount_add(&idx_tab->sa_refcount, NULL); 1344} 1345 1346void 1347sa_handle_destroy(sa_handle_t *hdl) 1348{ 1349 mutex_enter(&hdl->sa_lock); 1350 (void) dmu_buf_update_user((dmu_buf_t *)hdl->sa_bonus, hdl, 1351 NULL, NULL, NULL); 1352 1353 if (hdl->sa_bonus_tab) { 1354 sa_idx_tab_rele(hdl->sa_os, hdl->sa_bonus_tab); 1355 hdl->sa_bonus_tab = NULL; 1356 } 1357 if (hdl->sa_spill_tab) { 1358 sa_idx_tab_rele(hdl->sa_os, hdl->sa_spill_tab); 1359 hdl->sa_spill_tab = NULL; 1360 } 1361 1362 dmu_buf_rele(hdl->sa_bonus, NULL); 1363 1364 if (hdl->sa_spill) 1365 dmu_buf_rele((dmu_buf_t *)hdl->sa_spill, NULL); 1366 mutex_exit(&hdl->sa_lock); 1367 1368 kmem_cache_free(sa_cache, hdl); 1369} 1370 1371int 1372sa_handle_get_from_db(objset_t *os, dmu_buf_t *db, void *userp, 1373 sa_handle_type_t hdl_type, sa_handle_t **handlepp) 1374{ 1375 int error = 0; 1376 dmu_object_info_t doi; 1377 sa_handle_t *handle; 1378 1379#ifdef ZFS_DEBUG 1380 dmu_object_info_from_db(db, &doi); 1381 ASSERT(doi.doi_bonus_type == DMU_OT_SA || 1382 doi.doi_bonus_type == DMU_OT_ZNODE); 1383#endif 1384 /* find handle, if it exists */ 1385 /* if one doesn't exist then create a new one, and initialize it */ 1386 1387 handle = (hdl_type == SA_HDL_SHARED) ? dmu_buf_get_user(db) : NULL; 1388 if (handle == NULL) { 1389 sa_handle_t *newhandle; 1390 handle = kmem_cache_alloc(sa_cache, KM_SLEEP); 1391 handle->sa_userp = userp; 1392 handle->sa_bonus = db; 1393 handle->sa_os = os; 1394 handle->sa_spill = NULL; 1395 1396 error = sa_build_index(handle, SA_BONUS); 1397 newhandle = (hdl_type == SA_HDL_SHARED) ? 1398 dmu_buf_set_user_ie(db, handle, 1399 NULL, sa_evict) : NULL; 1400 1401 if (newhandle != NULL) { 1402 kmem_cache_free(sa_cache, handle); 1403 handle = newhandle; 1404 } 1405 } 1406 *handlepp = handle; 1407 1408 return (error); 1409} 1410 1411int 1412sa_handle_get(objset_t *objset, uint64_t objid, void *userp, 1413 sa_handle_type_t hdl_type, sa_handle_t **handlepp) 1414{ 1415 dmu_buf_t *db; 1416 int error; 1417 1418 if (error = dmu_bonus_hold(objset, objid, NULL, &db)) 1419 return (error); 1420 1421 return (sa_handle_get_from_db(objset, db, userp, hdl_type, 1422 handlepp)); 1423} 1424 1425int 1426sa_buf_hold(objset_t *objset, uint64_t obj_num, void *tag, dmu_buf_t **db) 1427{ 1428 return (dmu_bonus_hold(objset, obj_num, tag, db)); 1429} 1430 1431void 1432sa_buf_rele(dmu_buf_t *db, void *tag) 1433{ 1434 dmu_buf_rele(db, tag); 1435} 1436 1437int 1438sa_lookup_impl(sa_handle_t *hdl, sa_bulk_attr_t *bulk, int count) 1439{ 1440 ASSERT(hdl); 1441 ASSERT(MUTEX_HELD(&hdl->sa_lock)); 1442 return (sa_attr_op(hdl, bulk, count, SA_LOOKUP, NULL)); 1443} 1444 1445int 1446sa_lookup(sa_handle_t *hdl, sa_attr_type_t attr, void *buf, uint32_t buflen) 1447{ 1448 int error; 1449 sa_bulk_attr_t bulk; 1450 1451 bulk.sa_attr = attr; 1452 bulk.sa_data = buf; 1453 bulk.sa_length = buflen; 1454 bulk.sa_data_func = NULL; 1455 1456 ASSERT(hdl); 1457 mutex_enter(&hdl->sa_lock); 1458 error = sa_lookup_impl(hdl, &bulk, 1); 1459 mutex_exit(&hdl->sa_lock); 1460 return (error); 1461} 1462 1463#ifdef _KERNEL 1464int 1465sa_lookup_uio(sa_handle_t *hdl, sa_attr_type_t attr, uio_t *uio) 1466{ 1467 int error; 1468 sa_bulk_attr_t bulk; 1469 1470 bulk.sa_data = NULL; 1471 bulk.sa_attr = attr; 1472 bulk.sa_data_func = NULL; 1473 1474 ASSERT(hdl); 1475 1476 mutex_enter(&hdl->sa_lock); 1477 if ((error = sa_attr_op(hdl, &bulk, 1, SA_LOOKUP, NULL)) == 0) { 1478 error = uiomove((void *)bulk.sa_addr, MIN(bulk.sa_size, 1479 uio->uio_resid), UIO_READ, uio); 1480 } 1481 mutex_exit(&hdl->sa_lock); 1482 return (error); 1483 1484} 1485#endif 1486 1487void * 1488sa_find_idx_tab(objset_t *os, dmu_object_type_t bonustype, void *data) 1489{ 1490 sa_idx_tab_t *idx_tab; 1491 sa_hdr_phys_t *hdr = (sa_hdr_phys_t *)data; 1492 sa_os_t *sa = os->os_sa; 1493 sa_lot_t *tb, search; 1494 avl_index_t loc; 1495 1496 /* 1497 * Deterimine layout number. If SA node and header == 0 then 1498 * force the index table to the dummy "1" empty layout. 1499 * 1500 * The layout number would only be zero for a newly created file 1501 * that has not added any attributes yet, or with crypto enabled which 1502 * doesn't write any attributes to the bonus buffer. 1503 */ 1504 1505 search.lot_num = SA_LAYOUT_NUM(hdr, bonustype); 1506 1507 tb = avl_find(&sa->sa_layout_num_tree, &search, &loc); 1508 1509 /* Verify header size is consistent with layout information */ 1510 ASSERT(tb); 1511 ASSERT(IS_SA_BONUSTYPE(bonustype) && 1512 SA_HDR_SIZE_MATCH_LAYOUT(hdr, tb) || !IS_SA_BONUSTYPE(bonustype) || 1513 (IS_SA_BONUSTYPE(bonustype) && hdr->sa_layout_info == 0)); 1514 1515 /* 1516 * See if any of the already existing TOC entries can be reused? 1517 */ 1518 1519 for (idx_tab = list_head(&tb->lot_idx_tab); idx_tab; 1520 idx_tab = list_next(&tb->lot_idx_tab, idx_tab)) { 1521 boolean_t valid_idx = B_TRUE; 1522 int i; 1523 1524 if (tb->lot_var_sizes != 0 && 1525 idx_tab->sa_variable_lengths != NULL) { 1526 for (i = 0; i != tb->lot_var_sizes; i++) { 1527 if (hdr->sa_lengths[i] != 1528 idx_tab->sa_variable_lengths[i]) { 1529 valid_idx = B_FALSE; 1530 break; 1531 } 1532 } 1533 } 1534 if (valid_idx) { 1535 sa_idx_tab_hold(os, idx_tab); 1536 return (idx_tab); 1537 } 1538 } 1539 1540 /* No such luck, create a new entry */ 1541 idx_tab = kmem_zalloc(sizeof (sa_idx_tab_t), KM_SLEEP); 1542 idx_tab->sa_idx_tab = 1543 kmem_zalloc(sizeof (uint32_t) * sa->sa_num_attrs, KM_SLEEP); 1544 idx_tab->sa_layout = tb; 1545 refcount_create(&idx_tab->sa_refcount); 1546 if (tb->lot_var_sizes) 1547 idx_tab->sa_variable_lengths = kmem_alloc(sizeof (uint16_t) * 1548 tb->lot_var_sizes, KM_SLEEP); 1549 1550 sa_attr_iter(os, hdr, bonustype, sa_build_idx_tab, 1551 tb, idx_tab); 1552 sa_idx_tab_hold(os, idx_tab); /* one hold for consumer */ 1553 sa_idx_tab_hold(os, idx_tab); /* one for layout */ 1554 list_insert_tail(&tb->lot_idx_tab, idx_tab); 1555 return (idx_tab); 1556} 1557 1558void 1559sa_default_locator(void **dataptr, uint32_t *len, uint32_t total_len, 1560 boolean_t start, void *userdata) 1561{ 1562 ASSERT(start); 1563 1564 *dataptr = userdata; 1565 *len = total_len; 1566} 1567 1568static void 1569sa_attr_register_sync(sa_handle_t *hdl, dmu_tx_t *tx) 1570{ 1571 uint64_t attr_value = 0; 1572 sa_os_t *sa = hdl->sa_os->os_sa; 1573 sa_attr_table_t *tb = sa->sa_attr_table; 1574 int i; 1575 1576 mutex_enter(&sa->sa_lock); 1577 1578 if (!sa->sa_need_attr_registration || sa->sa_master_obj == 0) { 1579 mutex_exit(&sa->sa_lock); 1580 return; 1581 } 1582 1583 if (sa->sa_reg_attr_obj == 0) { 1584 sa->sa_reg_attr_obj = zap_create_link(hdl->sa_os, 1585 DMU_OT_SA_ATTR_REGISTRATION, 1586 sa->sa_master_obj, SA_REGISTRY, tx); 1587 } 1588 for (i = 0; i != sa->sa_num_attrs; i++) { 1589 if (sa->sa_attr_table[i].sa_registered) 1590 continue; 1591 ATTR_ENCODE(attr_value, tb[i].sa_attr, tb[i].sa_length, 1592 tb[i].sa_byteswap); 1593 VERIFY(0 == zap_update(hdl->sa_os, sa->sa_reg_attr_obj, 1594 tb[i].sa_name, 8, 1, &attr_value, tx)); 1595 tb[i].sa_registered = B_TRUE; 1596 } 1597 sa->sa_need_attr_registration = B_FALSE; 1598 mutex_exit(&sa->sa_lock); 1599} 1600 1601/* 1602 * Replace all attributes with attributes specified in template. 1603 * If dnode had a spill buffer then those attributes will be 1604 * also be replaced, possibly with just an empty spill block 1605 * 1606 * This interface is intended to only be used for bulk adding of 1607 * attributes for a new file. It will also be used by the ZPL 1608 * when converting and old formatted znode to native SA support. 1609 */ 1610int 1611sa_replace_all_by_template_locked(sa_handle_t *hdl, sa_bulk_attr_t *attr_desc, 1612 int attr_count, dmu_tx_t *tx) 1613{ 1614 sa_os_t *sa = hdl->sa_os->os_sa; 1615 1616 if (sa->sa_need_attr_registration) 1617 sa_attr_register_sync(hdl, tx); 1618 return (sa_build_layouts(hdl, attr_desc, attr_count, tx)); 1619} 1620 1621int 1622sa_replace_all_by_template(sa_handle_t *hdl, sa_bulk_attr_t *attr_desc, 1623 int attr_count, dmu_tx_t *tx) 1624{ 1625 int error; 1626 1627 mutex_enter(&hdl->sa_lock); 1628 error = sa_replace_all_by_template_locked(hdl, attr_desc, 1629 attr_count, tx); 1630 mutex_exit(&hdl->sa_lock); 1631 return (error); 1632} 1633 1634/* 1635 * Add/remove a single attribute or replace a variable-sized attribute value 1636 * with a value of a different size, and then rewrite the entire set 1637 * of attributes. 1638 * Same-length attribute value replacement (including fixed-length attributes) 1639 * is handled more efficiently by the upper layers. 1640 */ 1641static int 1642sa_modify_attrs(sa_handle_t *hdl, sa_attr_type_t newattr, 1643 sa_data_op_t action, sa_data_locator_t *locator, void *datastart, 1644 uint16_t buflen, dmu_tx_t *tx) 1645{ 1646 sa_os_t *sa = hdl->sa_os->os_sa; 1647 dmu_buf_impl_t *db = (dmu_buf_impl_t *)hdl->sa_bonus; 1648 dnode_t *dn; 1649 sa_bulk_attr_t *attr_desc; 1650 void *old_data[2]; 1651 int bonus_attr_count = 0; 1652 int bonus_data_size = 0; 1653 int spill_data_size = 0; 1654 int spill_attr_count = 0; 1655 int error; 1656 uint16_t length; 1657 int i, j, k, length_idx; 1658 sa_hdr_phys_t *hdr; 1659 sa_idx_tab_t *idx_tab; 1660 int attr_count; 1661 int count; 1662 1663 ASSERT(MUTEX_HELD(&hdl->sa_lock)); 1664 1665 /* First make of copy of the old data */ 1666 1667 DB_DNODE_ENTER(db); 1668 dn = DB_DNODE(db); 1669 if (dn->dn_bonuslen != 0) { 1670 bonus_data_size = hdl->sa_bonus->db_size; 1671 old_data[0] = kmem_alloc(bonus_data_size, KM_SLEEP); 1672 bcopy(hdl->sa_bonus->db_data, old_data[0], 1673 hdl->sa_bonus->db_size); 1674 bonus_attr_count = hdl->sa_bonus_tab->sa_layout->lot_attr_count; 1675 } else { 1676 old_data[0] = NULL; 1677 } 1678 DB_DNODE_EXIT(db); 1679 1680 /* Bring spill buffer online if it isn't currently */ 1681 1682 if ((error = sa_get_spill(hdl)) == 0) { 1683 spill_data_size = hdl->sa_spill->db_size; 1684 old_data[1] = kmem_alloc(spill_data_size, KM_SLEEP); 1685 bcopy(hdl->sa_spill->db_data, old_data[1], 1686 hdl->sa_spill->db_size); 1687 spill_attr_count = 1688 hdl->sa_spill_tab->sa_layout->lot_attr_count; 1689 } else if (error && error != ENOENT) { 1690 if (old_data[0]) 1691 kmem_free(old_data[0], bonus_data_size); 1692 return (error); 1693 } else { 1694 old_data[1] = NULL; 1695 } 1696 1697 /* build descriptor of all attributes */ 1698 1699 attr_count = bonus_attr_count + spill_attr_count; 1700 if (action == SA_ADD) 1701 attr_count++; 1702 else if (action == SA_REMOVE) 1703 attr_count--; 1704 1705 attr_desc = kmem_zalloc(sizeof (sa_bulk_attr_t) * attr_count, KM_SLEEP); 1706 1707 /* 1708 * loop through bonus and spill buffer if it exists, and 1709 * build up new attr_descriptor to reset the attributes 1710 */ 1711 k = j = 0; 1712 count = bonus_attr_count; 1713 hdr = SA_GET_HDR(hdl, SA_BONUS); 1714 idx_tab = SA_IDX_TAB_GET(hdl, SA_BONUS); 1715 for (; k != 2; k++) { 1716 /* iterate over each attribute in layout */ 1717 for (i = 0, length_idx = 0; i != count; i++) { 1718 sa_attr_type_t attr; 1719 1720 attr = idx_tab->sa_layout->lot_attrs[i]; 1721 if (attr == newattr) { 1722 /* duplicate attributes are not allowed */ 1723 ASSERT(action == SA_REPLACE || 1724 action == SA_REMOVE); 1725 /* must be variable-sized to be replaced here */ 1726 if (action == SA_REPLACE) { 1727 ASSERT(SA_REGISTERED_LEN(sa, attr) == 0); 1728 SA_ADD_BULK_ATTR(attr_desc, j, attr, 1729 locator, datastart, buflen); 1730 } 1731 } else { 1732 length = SA_REGISTERED_LEN(sa, attr); 1733 if (length == 0) { 1734 length = hdr->sa_lengths[length_idx]; 1735 } 1736 1737 SA_ADD_BULK_ATTR(attr_desc, j, attr, 1738 NULL, (void *) 1739 (TOC_OFF(idx_tab->sa_idx_tab[attr]) + 1740 (uintptr_t)old_data[k]), length); 1741 } 1742 if (SA_REGISTERED_LEN(sa, attr) == 0) 1743 length_idx++; 1744 } 1745 if (k == 0 && hdl->sa_spill) { 1746 hdr = SA_GET_HDR(hdl, SA_SPILL); 1747 idx_tab = SA_IDX_TAB_GET(hdl, SA_SPILL); 1748 count = spill_attr_count; 1749 } else { 1750 break; 1751 } 1752 } 1753 if (action == SA_ADD) { 1754 length = SA_REGISTERED_LEN(sa, newattr); 1755 if (length == 0) { 1756 length = buflen; 1757 } 1758 SA_ADD_BULK_ATTR(attr_desc, j, newattr, locator, 1759 datastart, buflen); 1760 } 1761 ASSERT3U(j, ==, attr_count); 1762 1763 error = sa_build_layouts(hdl, attr_desc, attr_count, tx); 1764 1765 if (old_data[0]) 1766 kmem_free(old_data[0], bonus_data_size); 1767 if (old_data[1]) 1768 kmem_free(old_data[1], spill_data_size); 1769 kmem_free(attr_desc, sizeof (sa_bulk_attr_t) * attr_count); 1770 1771 return (error); 1772} 1773 1774static int 1775sa_bulk_update_impl(sa_handle_t *hdl, sa_bulk_attr_t *bulk, int count, 1776 dmu_tx_t *tx) 1777{ 1778 int error; 1779 sa_os_t *sa = hdl->sa_os->os_sa; 1780 dmu_object_type_t bonustype; 1781 1782 bonustype = SA_BONUSTYPE_FROM_DB(SA_GET_DB(hdl, SA_BONUS)); 1783 1784 ASSERT(hdl); 1785 ASSERT(MUTEX_HELD(&hdl->sa_lock)); 1786 1787 /* sync out registration table if necessary */ 1788 if (sa->sa_need_attr_registration) 1789 sa_attr_register_sync(hdl, tx); 1790 1791 error = sa_attr_op(hdl, bulk, count, SA_UPDATE, tx); 1792 if (error == 0 && !IS_SA_BONUSTYPE(bonustype) && sa->sa_update_cb) 1793 sa->sa_update_cb(hdl, tx); 1794 1795 return (error); 1796} 1797 1798/* 1799 * update or add new attribute 1800 */ 1801int 1802sa_update(sa_handle_t *hdl, sa_attr_type_t type, 1803 void *buf, uint32_t buflen, dmu_tx_t *tx) 1804{ 1805 int error; 1806 sa_bulk_attr_t bulk; 1807 1808 bulk.sa_attr = type; 1809 bulk.sa_data_func = NULL; 1810 bulk.sa_length = buflen; 1811 bulk.sa_data = buf; 1812 1813 mutex_enter(&hdl->sa_lock); 1814 error = sa_bulk_update_impl(hdl, &bulk, 1, tx); 1815 mutex_exit(&hdl->sa_lock); 1816 return (error); 1817} 1818 1819int 1820sa_update_from_cb(sa_handle_t *hdl, sa_attr_type_t attr, 1821 uint32_t buflen, sa_data_locator_t *locator, void *userdata, dmu_tx_t *tx) 1822{ 1823 int error; 1824 sa_bulk_attr_t bulk; 1825 1826 bulk.sa_attr = attr; 1827 bulk.sa_data = userdata; 1828 bulk.sa_data_func = locator; 1829 bulk.sa_length = buflen; 1830 1831 mutex_enter(&hdl->sa_lock); 1832 error = sa_bulk_update_impl(hdl, &bulk, 1, tx); 1833 mutex_exit(&hdl->sa_lock); 1834 return (error); 1835} 1836 1837/* 1838 * Return size of an attribute 1839 */ 1840 1841int 1842sa_size(sa_handle_t *hdl, sa_attr_type_t attr, int *size) 1843{ 1844 sa_bulk_attr_t bulk; 1845 int error; 1846 1847 bulk.sa_data = NULL; 1848 bulk.sa_attr = attr; 1849 bulk.sa_data_func = NULL; 1850 1851 ASSERT(hdl); 1852 mutex_enter(&hdl->sa_lock); 1853 if ((error = sa_attr_op(hdl, &bulk, 1, SA_LOOKUP, NULL)) != 0) { 1854 mutex_exit(&hdl->sa_lock); 1855 return (error); 1856 } 1857 *size = bulk.sa_size; 1858 1859 mutex_exit(&hdl->sa_lock); 1860 return (0); 1861} 1862 1863int 1864sa_bulk_lookup_locked(sa_handle_t *hdl, sa_bulk_attr_t *attrs, int count) 1865{ 1866 ASSERT(hdl); 1867 ASSERT(MUTEX_HELD(&hdl->sa_lock)); 1868 return (sa_lookup_impl(hdl, attrs, count)); 1869} 1870 1871int 1872sa_bulk_lookup(sa_handle_t *hdl, sa_bulk_attr_t *attrs, int count) 1873{ 1874 int error; 1875 1876 ASSERT(hdl); 1877 mutex_enter(&hdl->sa_lock); 1878 error = sa_bulk_lookup_locked(hdl, attrs, count); 1879 mutex_exit(&hdl->sa_lock); 1880 return (error); 1881} 1882 1883int 1884sa_bulk_update(sa_handle_t *hdl, sa_bulk_attr_t *attrs, int count, dmu_tx_t *tx) 1885{ 1886 int error; 1887 1888 ASSERT(hdl); 1889 mutex_enter(&hdl->sa_lock); 1890 error = sa_bulk_update_impl(hdl, attrs, count, tx); 1891 mutex_exit(&hdl->sa_lock); 1892 return (error); 1893} 1894 1895int 1896sa_remove(sa_handle_t *hdl, sa_attr_type_t attr, dmu_tx_t *tx) 1897{ 1898 int error; 1899 1900 mutex_enter(&hdl->sa_lock); 1901 error = sa_modify_attrs(hdl, attr, SA_REMOVE, NULL, 1902 NULL, 0, tx); 1903 mutex_exit(&hdl->sa_lock); 1904 return (error); 1905} 1906 1907void 1908sa_object_info(sa_handle_t *hdl, dmu_object_info_t *doi) 1909{ 1910 dmu_object_info_from_db((dmu_buf_t *)hdl->sa_bonus, doi); 1911} 1912 1913void 1914sa_object_size(sa_handle_t *hdl, uint32_t *blksize, u_longlong_t *nblocks) 1915{ 1916 dmu_object_size_from_db((dmu_buf_t *)hdl->sa_bonus, 1917 blksize, nblocks); 1918} 1919 1920void 1921sa_update_user(sa_handle_t *newhdl, sa_handle_t *oldhdl) 1922{ 1923 (void) dmu_buf_update_user((dmu_buf_t *)newhdl->sa_bonus, 1924 oldhdl, newhdl, NULL, sa_evict); 1925 oldhdl->sa_bonus = NULL; 1926} 1927 1928void 1929sa_set_userp(sa_handle_t *hdl, void *ptr) 1930{ 1931 hdl->sa_userp = ptr; 1932} 1933 1934dmu_buf_t * 1935sa_get_db(sa_handle_t *hdl) 1936{ 1937 return ((dmu_buf_t *)hdl->sa_bonus); 1938} 1939 1940void * 1941sa_get_userdata(sa_handle_t *hdl) 1942{ 1943 return (hdl->sa_userp); 1944} 1945 1946void 1947sa_register_update_callback_locked(objset_t *os, sa_update_cb_t *func) 1948{ 1949 ASSERT(MUTEX_HELD(&os->os_sa->sa_lock)); 1950 os->os_sa->sa_update_cb = func; 1951} 1952 1953void 1954sa_register_update_callback(objset_t *os, sa_update_cb_t *func) 1955{ 1956 1957 mutex_enter(&os->os_sa->sa_lock); 1958 sa_register_update_callback_locked(os, func); 1959 mutex_exit(&os->os_sa->sa_lock); 1960} 1961 1962uint64_t 1963sa_handle_object(sa_handle_t *hdl) 1964{ 1965 return (hdl->sa_bonus->db_object); 1966} 1967 1968boolean_t 1969sa_enabled(objset_t *os) 1970{ 1971 return (os->os_sa == NULL); 1972} 1973 1974int 1975sa_set_sa_object(objset_t *os, uint64_t sa_object) 1976{ 1977 sa_os_t *sa = os->os_sa; 1978 1979 if (sa->sa_master_obj) 1980 return (1); 1981 1982 sa->sa_master_obj = sa_object; 1983 1984 return (0); 1985} 1986 1987int 1988sa_hdrsize(void *arg) 1989{ 1990 sa_hdr_phys_t *hdr = arg; 1991 1992 return (SA_HDR_SIZE(hdr)); 1993} 1994 1995void 1996sa_handle_lock(sa_handle_t *hdl) 1997{ 1998 ASSERT(hdl); 1999 mutex_enter(&hdl->sa_lock); 2000} 2001 2002void 2003sa_handle_unlock(sa_handle_t *hdl) 2004{ 2005 ASSERT(hdl); 2006 mutex_exit(&hdl->sa_lock); 2007} 2008