loader.conf revision 299706
1# This is loader.conf - a file full of useful variables that you can 2# set to change the default load behavior of your system. You should 3# not edit this file! Put any overrides into one of the 4# loader_conf_files instead and you will be able to update these 5# defaults later without spamming your local configuration information. 6# 7# All arguments must be in double quotes. 8# 9# $FreeBSD: stable/10/sys/boot/forth/loader.conf 299706 2016-05-14 00:44:23Z pfg $ 10 11############################################################## 12### Basic configuration options ############################ 13############################################################## 14 15exec="echo Loading /boot/defaults/loader.conf" 16 17kernel="kernel" # /boot sub-directory containing kernel and modules 18bootfile="kernel" # Kernel name (possibly absolute path) 19kernel_options="" # Flags to be passed to the kernel 20 21loader_conf_files="/boot/device.hints /boot/loader.conf /boot/loader.conf.local" 22nextboot_conf="/boot/nextboot.conf" 23nextboot_enable="NO" 24 25verbose_loading="NO" # Set to YES for verbose loader output 26 27 28############################################################## 29### Splash screen configuration ############################ 30############################################################## 31 32splash_bmp_load="NO" # Set this to YES for bmp splash screen! 33splash_pcx_load="NO" # Set this to YES for pcx splash screen! 34splash_txt_load="NO" # Set this to YES for TheDraw splash screen! 35vesa_load="NO" # Set this to YES to load the vesa module 36bitmap_load="NO" # Set this to YES if you want splash screen! 37bitmap_name="splash.bmp" # Set this to the name of the file 38bitmap_type="splash_image_data" # and place it on the module_path 39 40 41############################################################## 42### Random number generator configuration ################## 43############################################################## 44 45entropy_cache_load="NO" # Set this to YES to load entropy at boot time 46entropy_cache_name="/boot/entropy" # Set this to the name of the file 47entropy_cache_type="/boot/entropy" 48#kern.random.sys.seeded="0" # Set this to 1 to start /dev/random 49 # without waiting for a (re)seed. 50 51 52############################################################## 53### Initial memory disk settings ########################### 54############################################################## 55 56#initmd_load="YES" # The "initmd" prefix is arbitrary. 57#initmd_type="md_image" # Create md(4) disk at boot. 58#initmd_name="/boot/root.img" # Path to a file containing the image. 59#rootdev="ufs:/dev/md0" # Set the root filesystem to md(4) device. 60 61 62############################################################## 63### Loader settings ######################################## 64############################################################## 65 66#loader_delay="3" # Delay in seconds before loading anything. 67 # Default is unset and disabled (no delay). 68#autoboot_delay="10" # Delay in seconds before autobooting, 69 # set to -1 if you don't want user to be 70 # allowed to interrupt autoboot process and 71 # escape to the loader prompt, set to 72 # "NO" to disable autobooting 73#password="" # Prevent changes to boot options 74#bootlock_password="" # Prevent booting (see check-password.4th(8)) 75#geom_eli_passphrase_prompt="NO" # Prompt for geli(8) passphrase to mount root 76bootenv_autolist="YES" # Auto populate the list of ZFS Boot Environments 77#beastie_disable="NO" # Turn the beastie boot menu on and off 78#kernels="kernel kernel.old" # Kernels to display in the boot menu 79#loader_logo="orbbw" # Desired logo: orbbw, orb, fbsdbw, beastiebw, beastie, none 80#comconsole_speed="9600" # Set the current serial console speed 81#console="vidconsole" # A comma separated list of console(s) 82#currdev="disk1s1a" # Set the current device 83module_path="/boot/modules" # Set the module search path 84#prompt="\\${interpret}" # Set the command prompt 85#root_disk_unit="0" # Force the root disk unit number 86#rootdev="disk1s1a" # Set the root filesystem 87#tftp.blksize="1428" # Set the RFC 2348 TFTP block size. 88 # If the TFTP server does not support RFC 2348, 89 # the block size is set to 512. If the value 90 # is out of range ( < 8 || > 9008 ) an error is 91 # returned. 92#twiddle_divisor="1" # >1 means slow down the progress indicator. 93 94 95############################################################## 96### Kernel settings ######################################## 97############################################################## 98 99# The following boot_ variables are enabled by setting them to any value. 100# Their presence in the kernel environment (see kenv(1)) has the same 101# effect as setting the given boot flag (see boot(8)). 102 103#boot_askname="" # -a: Prompt the user for the name of the root device 104#boot_cdrom="" # -C: Attempt to mount root file system from CD-ROM 105#boot_ddb="" # -d: Instructs the kernel to start in the DDB debugger 106#boot_dfltroot="" # -r: Use the statically configured root file system 107#boot_gdb="" # -g: Selects gdb-remote mode for the kernel debugger 108#boot_multicons="" # -D: Use multiple consoles 109#boot_mute="" # -m: Mute the console 110#boot_pause="" # -p: Pause after each line during device probing 111#boot_serial="" # -h: Use serial console 112#boot_single="" # -s: Start system in single-user mode 113#boot_verbose="" # -v: Causes extra debugging information to be printed 114#init_path="/sbin/init:/sbin/oinit:/sbin/init.bak:/rescue/init" 115 # Sets the list of init candidates 116#init_shell="/bin/sh" # The shell binary used by init(8). 117#init_script="" # Initial script to run by init(8) before chrooting. 118#init_chroot="" # Directory for init(8) to chroot into. 119 120 121############################################################## 122### Kernel tunables ######################################## 123############################################################## 124 125#hw.physmem="1G" # Limit physical memory. See loader(8) 126#kern.dfldsiz="" # Set the initial data size limit 127#kern.dflssiz="" # Set the initial stack size limit 128#kern.hz="100" # Set the kernel interval timer rate 129#kern.maxbcache="" # Set the max buffer cache KVA storage 130#kern.maxdsiz="" # Set the max data size 131#kern.maxfiles="" # Set the sys. wide open files limit 132#kern.maxproc="" # Set the maximum # of processes 133#kern.maxssiz="" # Set the max stack size 134#kern.maxswzone="" # Set the max swmeta KVA storage 135#kern.maxtsiz="" # Set the max text size 136#kern.maxusers="32" # Set size of various static tables 137#kern.msgbufsize="65536" # Set size of kernel message buffer 138#kern.nbuf="" # Set the number of buffer headers 139#kern.ncallout="" # Set the maximum # of timer events 140#kern.ngroups="1023" # Set the maximum # of supplemental groups 141#kern.sgrowsiz="" # Set the amount to grow stack 142#kern.cam.boot_delay="10000" # Delay (in ms) of root mount for CAM bus 143 # registration, useful for USB sticks as root 144#kern.cam.scsi_delay="2000" # Delay (in ms) before probing SCSI 145#kern.ipc.maxsockets="" # Set the maximum number of sockets available 146#kern.ipc.nmbclusters="" # Set the number of mbuf clusters 147#kern.ipc.nsfbufs="" # Set the number of sendfile(2) bufs 148#net.inet.tcp.tcbhashsize="" # Set the value of TCBHASHSIZE 149#vfs.root.mountfrom="" # Specify root partition in a way the 150 # kernel understands 151#vm.kmem_size="" # Sets the size of kernel memory (bytes) 152#debug.kdb.break_to_debugger="0" # Allow console to break into debugger. 153#debug.ktr.cpumask="0xf" # Bitmask of CPUs to enable KTR on 154#debug.ktr.mask="0x1200" # Bitmask of KTR events to enable 155#debug.ktr.verbose="1" # Enable console dump of KTR events 156#net.graph.maxalloc="128" # Maximum number of queue items to allocate 157 158 159############################################################## 160### ATA modules ############################################ 161############################################################## 162 163ataacard_load="NO" # ACARD 164ataacerlabs_load="NO" # Acer Labs Inc. (ALI) 165ataamd_load="NO" # American Micro Devices (AMD) 166ataati_load="NO" # ATI 167atacenatek_load="NO" # Cenatek 168atacypress_load="NO" # Cypress 169atacyrix_load="NO" # Cyrix 170atahighpoint_load="NO" # HighPoint 171ataintel_load="NO" # Intel 172ataite_load="NO" # Integrated Technology Inc. (ITE) 173atajmicron_load="NO" # JMicron 174atamarvell_load="NO" # Marvell 175atamicron_load="NO" # Micron 176atanational_load="NO" # National 177atanetcell_load="NO" # NetCell 178atanvidia_load="NO" # nVidia 179atapromise_load="NO" # Promise 180ataserverworks_load="NO" # ServerWorks 181atasiliconimage_load="NO" # Silicon Image Inc. (SiI) (formerly CMD) 182atasis_load="NO" # Silicon Integrated Systems Corp.(SiS) 183atavia_load="NO" # VIA Technologies Inc. 184 185 186############################################################## 187### Filesystem and related modules ######################### 188############################################################## 189 190# Filesystems 191 192cd9660_load="NO" # ISO 9660 filesystem 193fdescfs_load="NO" # Filedescriptors filesystem 194linprocfs_load="NO" # Linux compatibility process filesystem 195linsysfs_load="NO" # Linux compatibility system filesystem 196msdosfs_load="NO" # FAT-12/16/32 197nfsclient_load="NO" # NFS client 198nfsserver_load="NO" # NFS server 199nullfs_load="NO" # Null filesystem 200procfs_load="NO" # Process filesystem 201reiserfs_load="NO" # ReiserFS 202unionfs_load="NO" # Union filesystem 203zfs_load="NO" # ZFS 204 205# Related stuff 206 207geom_bde_load="NO" # Disk encryption driver (see gbde(4,8)) 208geom_ccd_load="NO" # Concatenated disk driver (see ccd(4), 209 # ccdconfig(8)) 210geom_concat_load="NO" # Concatenated disk driver (see gconcat(8)) 211geom_eli_load="NO" # Disk encryption driver (see geli(8)) 212geom_gate_load="NO" # Userland disk driver (see geom_gate(4), 213 # ggatec(8), ggated(8), ggatel(8)) 214geom_journal_load="NO" # Journaled filesystem driver (see gjournal(8)) 215geom_label_load="NO" # File system labels (see glabel(8)) 216geom_md_load="NO" # Memory disk driver (vnode/swap/malloc) (see 217 # md(4), mdconfig(8)) 218geom_mirror_load="NO" # RAID1 disk driver (see gmirror(8)) 219geom_mountver_load="NO" # Mount verification disk driver 220geom_nop_load="NO" # Transparent disk driver (see gnop(8)) 221geom_raid3_load="NO" # RAID3 disk driver (see graid3(8)) 222geom_shsec_load="NO" # Shared secret disk driver (see gshsec(8)) 223geom_stripe_load="NO" # RAID0 disk driver (see gstripe(8)) 224geom_uzip_load="NO" # Compressed disk images driver (see mkuzip(8)) 225geom_vinum_load="NO" # Concatenated/mirror/raid driver (see vinum(4)) 226 227 228############################################################## 229### FireWire modules ####################################### 230############################################################## 231 232firewire_load="NO" # IEEE1394 High-performance Serial Bus 233fwe_load="NO" # Ethernet emulation driver for FireWire 234fwip_load="NO" # IP over FireWire driver 235fwohci_load="NO" # OHCI FireWire chipset device driver 236sbp_load="NO" # SBP-2 Mass Storage Devices driver 237sbp_targ_load="NO" # SBP-2 Target mode 238 239 240############################################################## 241### Screen saver modules ################################### 242############################################################## 243 244# This is best done in rc.conf 245 246screensave_load="NO" # Set to YES to load a screensaver module 247screensave_name="green_saver" # Set to the name of the screensaver module 248 249 250############################################################## 251### Emulation modules ###################################### 252############################################################## 253 254ibcs2_load="NO" # IBCS2 (SCO) emulation 255ibcs2_coff_load="NO" 256linux_load="NO" # Linux emulation 257lindev_load="NO" # Linux-specific pseudo devices (see lindev(4)) 258svr4_load="NO" # SystemV R4 emulation 259streams_load="NO" # System V streams module 260 261 262############################################################## 263### Networking modules ##################################### 264############################################################## 265 266if_disc_load="NO" # Discard device 267if_ef_load="NO" # pseudo-device providing support for multiple 268 # ethernet frame types 269if_epair_load="NO" # Virtual b-t-b Ethernet-like interface pair 270if_faith_load="NO" # IPv6-to-IPv4 TCP relay capturing interface 271if_gif_load="NO" # generic tunnel interface 272if_gre_load="NO" # encapsulating network device 273if_stf_load="NO" # 6to4 tunnel interface 274if_tap_load="NO" # Ethernet tunnel software network interface 275if_tun_load="NO" # Tunnel driver (user process ppp) 276if_vlan_load="NO" # IEEE 802.1Q VLAN network interface 277ipfw_load="NO" # Firewall 278pf_load="NO" # packet filter 279 280 281############################################################## 282### Networking drivers ##################################### 283############################################################## 284 285bridgestp_load="NO" # if_bridge(4) support 286miibus_load="NO" # miibus support, needed for some drivers 287carp_load="NO" # carp(4) protocol 288if_ae_load="NO" # Attansic/Atheros L2 FastEthernet 289if_age_load="NO" # Attansic/Atheros L1 Gigabit Ethernet 290if_alc_load="NO" # Atheros AR8131/AR8132 Ethernet 291if_ale_load="NO" # Atheros AR8121/AR8113/AR8114 Ethernet 292if_an_load="NO" # Aironet 4500/4800 802.11 wireless NICs 293if_ath_load="NO" # Atheros IEEE 802.11 wireless NICs 294if_aue_load="NO" # ADMtek AN986 Pegasus USB Ethernet 295if_axe_load="NO" # ASIX Electronics AX88172 USB Ethernet 296if_bce_load="NO" # Broadcom NetXtreme II Gigabit Ethernet 297if_bfe_load="NO" # Broadcom BCM4401 298if_bge_load="NO" # Broadcom BCM570x PCI Gigabit Ethernet 299if_bridge_load="NO" # if_bridge(4) devices 300if_bwi_load="NO" # Broadcom BCM53xx IEEE 802.11b/g wireness NICs 301if_bwn_load="NO" # Broadcom BCM43xx IEEE 802.11 wireless NICs 302if_bxe_load="NO" # Broadcom NetXtreme II 10Gb Ethernet 303if_cas_load="NO" # Sun Cassini/Cassini+ and NS DP83065 Saturn 304if_cm_load="NO" # SMC (90c26, 90c56, 90c66) 305if_cs_load="NO" # Crystal Semiconductor CS8920 306if_cue_load="NO" # CATC USB-EL1210A USB Ethernet 307if_cxgb_load="NO" # Chelsio T3 10 Gigabit Ethernet 308if_dc_load="NO" # DEC/Intel 21143 and various workalikes 309if_de_load="NO" # DEC DC21x4x Ethernet 310if_ed_load="NO" # National Semiconductor DS8390/WD83C690 311 # Ethernet 312if_em_load="NO" # Intel(R) PRO/1000 Gigabit Ethernet 313if_en_load="NO" # Midway-based ATM interfaces 314if_ep_load="NO" # 3Com Etherlink III (3c5x9) 315if_et_load="NO" # Agere ET1310 10/100/Gigabit Ethernet 316if_ex_load="NO" # Intel EtherExpress Pro/10 Ethernet 317if_fatm_load="NO" # Fore PCA200E ATM 318if_fe_load="NO" # Fujitsu MB86960A/MB86965A based Ethernet 319 # adapters 320if_fxp_load="NO" # Intel EtherExpress PRO/100B (82557, 82558) 321if_gem_load="NO" # Sun GEM/Sun ERI/Apple GMAC 322if_hatm_load="NO" # Fore/Marconi HE155 and HE622 323if_hme_load="NO" # Sun Microelectronics STP2002-STQ Ethernet 324if_ie_load="NO" # Intel 82586 325if_igb_load="NO" # Intel(R) PRO/1000 Gigabit Ethernet 326if_ipw_load="NO" # Intel PRO/Wireless 2100 wireless 327if_iwi_load="NO" # Intel PRO/Wireless 2200BG/2225BG/2915ABG 328 # wireless 329if_iwn_load="NO" # Intel Wireless WiFi Link 802.11n wireless 330if_ixgb_load="NO" # Intel PRO/10Gb Ethernet 331if_ixgbe_load="NO" # Intel PRO/10Gb Ethernet PCI Express 332if_jme_load="NO" # JMicron JMC250 Gigabit/JMC260 Fast Ethernet 333if_lagg_load="NO" # lagg(4) devices 334if_le_load="NO" # AMD Am7900 LANCE and Am79C9xx PCnet 335if_lge_load="NO" # Level 1 LXT1001 NetCellerator PCI Gigabit 336 # Ethernet 337if_malo_load="NO" # Marvell Libertas 88W8335 802.11 wireless 338 # adapter 339if_msk_load="NO" # Marvell/SysKonnect Yukon II Gigabit Ethernet 340if_mxge_load="NO" # Myricom Myri10GE 10Gb Ethernet 341if_my_load="NO" # Myson PCI Fast Ethernet 342if_nfe_load="NO" # NVIDIA nForce MCP Networking Adapter 343if_nge_load="NO" # National Semiconductor PCI Gigabit Ethernet 344if_nve_load="NO" # NVIDIA nForce MCP Networking Adapter 345if_nxge_load="NO" # Neterion Xframe 10Gb Ethernet 346if_patm_load="NO" # IDT77252 ATM 347if_pcn_load="NO" # AMD PCnet PCI 348if_ral_load="NO" # Ralink Technology wireless 349if_re_load="NO" # RealTek 8139C+/8169/8169S/8110S 350if_rl_load="NO" # RealTek 8129/8139 351if_rue_load="NO" # RealTek RTL8150 USB to Fast Ethernet 352if_rum_load="NO" # Ralink Technology USB 802.11a/b/g wireless 353if_run_load="NO" # Ralink Technology USB 802.11a/g/n wireless 354if_sbni_load="NO" # Granch SBNI12 leased line adapters 355if_sf_load="NO" # Adaptec Duralink PCI (AIC-6915 "starfire") 356if_sge_load="NO" # Silicon Integrated Systems SiS 190/191 357if_sis_load="NO" # Silicon Integrated Systems SiS 900/7016 358if_sk_load="NO" # SysKonnect SK-984x series PCI Gigabit Ethernet 359if_sn_load="NO" # SMC 91Cxx 360if_ste_load="NO" # Sundance Technologies ST201 Fast Ethernet 361if_stge_load="NO" # Sundance/Tamarack TC9021 Gigabit Ethernet 362if_ti_load="NO" # Alteon Networks Tigon 1 and Tigon 2 363if_tl_load="NO" # Texas Instruments TNETE100 ("ThunderLAN") 364if_tx_load="NO" # SMC 83c17x Fast Ethernet 365if_txp_load="NO" # 3Com 3XP Typhoon/Sidewinder (3CR990) 366if_vge_load="NO" # VIA VT6122 PCI Gigabit Ethernet 367if_vte_load="NO" # DM&P Vortex86 RDC R6040 Fast Ethernet 368if_uath_load="NO" # Atheros USB wireless for AR5005UG & AR5005UX 369if_udav_load="NO" # Davicom DM9601 USB Ethernet 370if_upgt_load="NO" # Conexant/Intersil PrismGT USB wireless 371if_ural_load="NO" # Ralink Technology USB wireless 372if_urtw_load="NO" # Realtek 8187L USB wireless 373if_vr_load="NO" # VIA Rhine I and Rhine II 374if_vx_load="NO" # 3Com 3C590 family 375if_wb_load="NO" # Winbond W89C840F 376if_wi_load="NO" # WaveLAN/IEEE 802.11 wireless NICs 377if_wpi_load="NO" # Intel 3945ABG Wireless LAN IEEE 802.11 378if_xe_load="NO" # Xircom CreditCard PCMCIA 379if_xl_load="NO" # 3Com Etherlink XL (3c900, 3c905, 3c905B) 380utopia_load="NO" # ATM PHY driver 381 382 383############################################################## 384### Netgraph modules ####################################### 385############################################################## 386 387ng_UI_load="NO" # UI netgraph node type 388ng_async_load="NO" # asynchronous framing netgraph node type 389ng_bpf_load="NO" # Berkeley packet filter netgraph node type 390ng_bridge_load="NO" # Ethernet bridging netgraph node type 391ng_cisco_load="NO" # Cisco HDLC protocol netgraph node type 392ng_echo_load="NO" # Netgraph echo node type 393ng_eiface_load="NO" # generic Ethernet interface netgraph node type 394ng_etf_load="NO" # Ethertype filtering netgraph node type 395ng_ether_load="NO" # Ethernet netgraph node type 396ng_fec_load="NO" # netgraph Fast EtherChannel node 397ng_frame_relay_load="NO" # frame relay netgraph node type 398ng_gif_load="NO" # generic tunnel interface netgraph node type 399ng_gif_demux_load="NO" # demultiplexer for packets from ng_gif(4) nodes 400ng_hole_load="NO" # Netgraph discard node type 401ng_hub_load="NO" # packet distribution netgraph node type 402ng_iface_load="NO" # interface Netgraph node type 403ng_ip_input_load="NO" # netgraph IP input node type 404ng_ksocket_load="NO" # kernel socket netgraph node type 405ng_l2tp_load="NO" # L2TP protocol netgraph node type 406ng_lmi_load="NO" # frame relay LMI protocol netgraph node type 407ng_mppc_load="NO" # Microsoft MPPC/MPPE compression and 408 # encryption netgraph node type 409ng_netflow_load="NO" # Cisco's NetFlow netgraph node type 410ng_one2many_load="NO" # packet multiplexing netgraph node type 411ng_ppp_load="NO" # PPP protocol netgraph node type 412ng_pppoe_load="NO" # RFC 2516 PPPOE protocol netgraph node type 413ng_pptpgre_load="NO" # PPTP GRE protocol netgraph node type 414ng_rfc1490_load="NO" # RFC 1490 netgraph node type 415ng_socket_load="NO" # Netgraph socket node type 416ng_split_load="NO" # netgraph node to separate incoming and 417 # outgoing flows 418ng_sppp_load="NO" # sppp netgraph node type 419ng_tee_load="NO" # Netgraph ``tee'' node type 420ng_tty_load="NO" # Netgraph node type that is also a line 421 # discipline 422ng_vjc_load="NO" # Van Jacobsen compression netgraph node type 423ng_vlan_load="NO" # IEEE 802.1Q VLAN tagging netgraph node type 424 425 426############################################################## 427### Sound modules ########################################## 428############################################################## 429 430sound_load="NO" # Digital sound subsystem 431snd_ad1816_load="NO" # ad1816 432snd_als4000_load="NO" # als4000 433snd_atiixp_load="NO" # atiixp 434snd_cmi_load="NO" # cmi 435snd_cs4281_load="NO" # cs4281 436snd_csa_load="NO" # csa 437snd_ds1_load="NO" # ds1 438snd_emu10k1_load="NO" # Creative Sound Blaster Live 439snd_emu10kx_load="NO" # Creative SoundBlaster Live! and Audigy 440snd_envy24_load="NO" # VIA Envy24 441snd_envy24ht_load="NO" # VIA Envy24HT 442snd_es137x_load="NO" # es137x 443snd_ess_load="NO" # ess 444snd_fm801_load="NO" # fm801 445snd_hda_load="NO" # Intel High Definition Audio (Controller) 446snd_ich_load="NO" # Intel ICH 447snd_maestro_load="NO" # Maestro 448snd_maestro3_load="NO" # Maestro3 449snd_mss_load="NO" # Mss 450snd_neomagic_load="NO" # Neomagic 451snd_sb16_load="NO" # Sound Blaster 16 452snd_sb8_load="NO" # Sound Blaster Pro 453snd_sbc_load="NO" # Sbc 454snd_solo_load="NO" # Solo 455snd_spicds_load="NO" # SPI codecs 456snd_t4dwave_load="NO" # t4dwave 457snd_via8233_load="NO" # via8233 458snd_via82c686_load="NO" # via82c686 459snd_vibes_load="NO" # vibes 460snd_driver_load="NO" # All sound drivers 461 462 463############################################################## 464### USB modules ############################################ 465############################################################## 466 467usb_load="NO" # USB subsystem 468udbp_load="NO" # USB double bulk pipe host 2 host cables 469ugen_load="NO" # USB generic device, if all else fails ... 470ucycom_load="NO" # Cyprus USB serial adapters 471ufm_load="NO" # Fm Radio 472uhid_load="NO" # Human Interface Devices 473ukbd_load="NO" # Keyboard 474ulpt_load="NO" # Printer 475ums_load="NO" # Mouse 476umass_load="NO" # Mass Storage Devices 477umct_load="NO" # Magic Control Technology USB-RS232 478umodem_load="NO" # Modems 479uplcom_load="NO" # Prolific USB serial adapters 480urio_load="NO" # Rio MP3 players 481uvisor_load="NO" # PalmOS based PDAs 482if_aue_load="NO" # ADMtek USB ethernet 483if_axe_load="NO" # ASIX Electronics AX88172 USB ethernet 484if_cdce_load="NO" # Ethernet over USB (CDC) 485if_cue_load="NO" # CATC USB ethernet 486if_kue_load="NO" # Kawasaki LSI USB ethernet 487if_rae_load="NO" # Realtek RTL8150 USB adapter. 488if_rum_load="NO" # Ralink USB 802.11 wireless adapter 489if_uath_load="NO" # Atheros AR5523 wireless adapter 490if_run_load="NO" # Ralink USB 802.11 wireless adapter 491if_ural_load="NO" # Ralink RT2500USB 802.11 wireless adapter 492if_zyd_load="NO" # ZyDAS ZD1211(B) USB 802.11 wireless adapter 493snd_uaudio_load="NO" # USB audio 494 495 496############################################################## 497### Other modules ########################################## 498############################################################## 499 500aio_load="NO" # Asynchronous I/O 501bktr_load="NO" # Brooktree Bt848/Bt878 TV/Video Capture Card 502ispfw_load="NO" # Qlogic ISP Firmware 503agp_load="NO" # agp module 504accf_data_load="NO" # Wait for data accept filter 505accf_dns_load="NO" # Wait for full DNS request accept filter 506accf_http_load="NO" # Wait for full HTTP request accept filter 507ppi_load="NO" # Interface to ppbus parallel 'geek' port 508pps_load="NO" # Pulse per second devices 509puc_load="NO" # PCI "Universal" Communications driver 510random_load="NO" # Random device 511speaker_load="NO" # AT speaker module 512coretemp_load="NO" # Intel Core CPU temperature monitor 513vkbd_load="NO" # Virtual AT keyboard interface 514vpd_load="NO" # Vital Product Data kernel interface 515vpo_load="NO" # Parallel to SCSI interface driver 516amdtemp_load="NO" # AMD K8/K10/K11 temperature monitor 517tpm_load="NO" # Trusted Platform Module 518wbwd_load="NO" # Winbond watchdog 519 520 521############################################################## 522### ACPI settings ########################################## 523############################################################## 524 525acpi_dsdt_load="NO" # DSDT Overriding 526acpi_dsdt_type="acpi_dsdt" # Don't change this 527acpi_dsdt_name="/boot/acpi_dsdt.aml" 528 # Override DSDT in BIOS by this file 529acpi_video_load="NO" # Load the ACPI video extension driver 530 531 532############################################################## 533### TrustedBSD MAC settings ################################ 534############################################################## 535 536mac_biba_load="NO" # Biba MAC policy 537mac_bsdextended_load="NO" # BSD/extended MAC policy 538mac_ifoff="NO" # Interface silencing policy 539mac_mls_load="NO" # MLS MAC policy 540mac_none_load="NO" # Null MAC policy 541mac_partition_load="NO" # Partition MAC policy 542mac_seeotheruids_load="NO" # UID visbility MAC policy 543 544 545############################################################## 546### Module loading syntax example ########################## 547############################################################## 548 549#module_load="YES" # loads module "module" 550#module_name="realname" # uses "realname" instead of "module" 551#module_type="type" # passes "-t type" to load 552#module_flags="flags" # passes "flags" to the module 553#module_before="cmd" # executes "cmd" before loading the module 554#module_after="cmd" # executes "cmd" after loading the module 555#module_error="cmd" # executes "cmd" if load fails 556
