loader.conf revision 281843
1# This is loader.conf - a file full of useful variables that you can 2# set to change the default load behavior of your system. You should 3# not edit this file! Put any overrides into one of the 4# loader_conf_files instead and you will be able to update these 5# defaults later without spamming your local configuration information. 6# 7# All arguments must be in double quotes. 8# 9# $FreeBSD: stable/10/sys/boot/forth/loader.conf 281843 2015-04-22 01:08:40Z dteske $ 10 11############################################################## 12### Basic configuration options ############################ 13############################################################## 14 15exec=".( Loading /boot/defaults/loader.conf ) cr" 16 17kernel="kernel" # /boot sub-directory containing kernel and modules 18bootfile="kernel" # Kernel name (possibly absolute path) 19kernel_options="" # Flags to be passed to the kernel 20 21loader_conf_files="/boot/device.hints /boot/loader.conf /boot/loader.conf.local" 22nextboot_conf="/boot/nextboot.conf" 23nextboot_enable="NO" 24 25verbose_loading="NO" # Set to YES for verbose loader output 26 27 28############################################################## 29### Splash screen configuration ############################ 30############################################################## 31 32splash_bmp_load="NO" # Set this to YES for bmp splash screen! 33splash_pcx_load="NO" # Set this to YES for pcx splash screen! 34splash_txt_load="NO" # Set this to YES for TheDraw splash screen! 35vesa_load="NO" # Set this to YES to load the vesa module 36bitmap_load="NO" # Set this to YES if you want splash screen! 37bitmap_name="splash.bmp" # Set this to the name of the file 38bitmap_type="splash_image_data" # and place it on the module_path 39 40 41############################################################## 42### Random number generator configuration ################### 43############################################################## 44 45entropy_cache_load="NO" # Set this to YES to load entropy at boot time 46entropy_cache_name="/boot/entropy" # Set this to the name of the file 47entropy_cache_type="/boot/entropy" 48#kern.random.sys.seeded="0" # Set this to 1 to start /dev/random 49 # without waiting for a (re)seed. 50 51 52############################################################## 53### Loader settings ######################################## 54############################################################## 55 56#loader_delay="3" # Delay in seconds before loading anything. 57 # Default is unset and disabled (no delay). 58#autoboot_delay="10" # Delay in seconds before autobooting, 59 # set to -1 if you don't want user to be 60 # allowed to interrupt autoboot process and 61 # escape to the loader prompt, set to 62 # "NO" to disable autobooting 63#password="" # Prevent changes to boot options 64#bootlock_password="" # Prevent booting (see check-password.4th(8)) 65#geom_eli_passphrase_prompt="NO" # Prompt for geli(8) passphrase to mount root 66#beastie_disable="NO" # Turn the beastie boot menu on and off 67#kernels="kernel kernel.old" # Kernels to display in the boot menu 68#loader_logo="orbbw" # Desired logo: orbbw, orb, fbsdbw, beastiebw, beastie, none 69#comconsole_speed="9600" # Set the current serial console speed 70#console="vidconsole" # A comma separated list of console(s) 71#currdev="disk1s1a" # Set the current device 72module_path="/boot/modules" # Set the module search path 73#prompt="\\${interpret}" # Set the command prompt 74#root_disk_unit="0" # Force the root disk unit number 75#rootdev="disk1s1a" # Set the root filesystem 76#tftp.blksize="1428" # Set the RFC 2348 TFTP block size. 77 # If the TFTP server does not support RFC 2348, 78 # the block size is set to 512. If the value 79 # is out of range ( < 8 || > 9008 ) an error is 80 # returned. 81#twiddle_divisor="1" # >1 means slow down the progress indicator. 82 83 84############################################################## 85### Kernel settings ######################################## 86############################################################## 87 88# The following boot_ variables are enabled by setting them to any value. 89# Their presence in the kernel environment (see kenv(1)) has the same 90# effect as setting the given boot flag (see boot(8)). 91 92#boot_askname="" # -a: Prompt the user for the name of the root device 93#boot_cdrom="" # -C: Attempt to mount root file system from CD-ROM 94#boot_ddb="" # -d: Instructs the kernel to start in the DDB debugger 95#boot_dfltroot="" # -r: Use the statically configured root file system 96#boot_gdb="" # -g: Selects gdb-remote mode for the kernel debugger 97#boot_multicons="" # -D: Use multiple consoles 98#boot_mute="" # -m: Mute the console 99#boot_pause="" # -p: Pause after each line during device probing 100#boot_serial="" # -h: Use serial console 101#boot_single="" # -s: Start system in single-user mode 102#boot_verbose="" # -v: Causes extra debugging information to be printed 103#init_path="/sbin/init:/sbin/oinit:/sbin/init.bak:/rescue/init" 104 # Sets the list of init candidates 105#init_shell="/bin/sh" # The shell binary used by init(8). 106#init_script="" # Initial script to run by init(8) before chrooting. 107#init_chroot="" # Directory for init(8) to chroot into. 108 109 110############################################################## 111### Kernel tunables ######################################## 112############################################################## 113 114#hw.physmem="1G" # Limit physical memory. See loader(8) 115#kern.dfldsiz="" # Set the initial data size limit 116#kern.dflssiz="" # Set the initial stack size limit 117#kern.hz="100" # Set the kernel interval timer rate 118#kern.maxbcache="" # Set the max buffer cache KVA storage 119#kern.maxdsiz="" # Set the max data size 120#kern.maxfiles="" # Set the sys. wide open files limit 121#kern.maxproc="" # Set the maximum # of processes 122#kern.maxssiz="" # Set the max stack size 123#kern.maxswzone="" # Set the max swmeta KVA storage 124#kern.maxtsiz="" # Set the max text size 125#kern.maxusers="32" # Set size of various static tables 126#kern.msgbufsize="65536" # Set size of kernel message buffer 127#kern.nbuf="" # Set the number of buffer headers 128#kern.ncallout="" # Set the maximum # of timer events 129#kern.ngroups="1023" # Set the maximum # of supplemental groups 130#kern.sgrowsiz="" # Set the amount to grow stack 131#kern.cam.boot_delay="10000" # Delay (in ms) of root mount for CAM bus 132 # registration, useful for USB sticks as root 133#kern.cam.scsi_delay="2000" # Delay (in ms) before probing SCSI 134#kern.ipc.maxsockets="" # Set the maximum number of sockets avaliable 135#kern.ipc.nmbclusters="" # Set the number of mbuf clusters 136#kern.ipc.nsfbufs="" # Set the number of sendfile(2) bufs 137#net.inet.tcp.tcbhashsize="" # Set the value of TCBHASHSIZE 138#vfs.root.mountfrom="" # Specify root partition in a way the 139 # kernel understands 140#vm.kmem_size="" # Sets the size of kernel memory (bytes) 141#debug.ktr.cpumask="0xf" # Bitmask of CPUs to enable KTR on 142#debug.ktr.mask="0x1200" # Bitmask of KTR events to enable 143#debug.ktr.verbose="1" # Enable console dump of KTR events 144#net.graph.maxalloc="128" # Maximum number of queue items to allocate 145 146 147############################################################## 148### ATA modules ############################################## 149############################################################## 150 151ataahci_load="NO" # AHCI SATA 152ataacard_load="NO" # ACARD 153ataacerlabs_load="NO" # Acer Labs Inc. (ALI) 154ataadaptec_load="NO" # Adaptec 155ataamd_load="NO" # American Micro Devices (AMD) 156ataati_load="NO" # ATI 157atacenatek_load="NO" # Cenatek 158atacypress_load="NO" # Cypress 159atacyrix_load="NO" # Cyrix 160atahighpoint_load="NO" # HighPoint 161ataintel_load="NO" # Intel 162ataite_load="NO" # Integrated Technology Inc. (ITE) 163atajmicron_load="NO" # JMicron 164atamarvell_load="NO" # Marvell 165atamicron_load="NO" # Micron 166atanational_load="NO" # National 167atanetcell_load="NO" # NetCell 168atanvidia_load="NO" # nVidia 169atapromise_load="NO" # Promise 170ataserverworks_load="NO" # ServerWorks 171atasiliconimage_load="NO" # Silicon Image Inc. (SiI) (formerly CMD) 172atasis_load="NO" # Silicon Integrated Systems Corp.(SiS) 173atavia_load="NO" # VIA Technologies Inc. 174 175 176############################################################## 177### Filesystem and related modules ######################### 178############################################################## 179 180# Filesystems 181 182cd9660_load="NO" # ISO 9660 filesystem 183fdescfs_load="NO" # Filedescriptors filesystem 184linprocfs_load="NO" # Linux compatibility process filesystem 185linsysfs_load="NO" # Linux compatibility system filesystem 186msdosfs_load="NO" # FAT-12/16/32 187nfsclient_load="NO" # NFS client 188nfsserver_load="NO" # NFS server 189nullfs_load="NO" # Null filesystem 190procfs_load="NO" # Process filesystem 191reiserfs_load="NO" # ReiserFS 192unionfs_load="NO" # Union filesystem 193zfs_load="NO" # ZFS 194 195# Related stuff 196 197geom_bde_load="NO" # Disk encryption driver (see gbde(4,8)) 198geom_ccd_load="NO" # Concatenated disk driver (see ccd(4), 199 # ccdconfig(8)) 200geom_concat_load="NO" # Concatenated disk driver (see gconcat(8)) 201geom_eli_load="NO" # Disk encryption driver (see geli(8)) 202geom_gate_load="NO" # Userland disk driver (see geom_gate(4), 203 # ggatec(8), ggated(8), ggatel(8)) 204geom_journal_load="NO" # Journaled filesystem driver (see gjournal(8)) 205geom_label_load="NO" # File system labels (see glabel(8)) 206geom_md_load="NO" # Memory disk driver (vnode/swap/malloc) (see 207 # md(4), mdconfig(8)) 208geom_mirror_load="NO" # RAID1 disk driver (see gmirror(8)) 209geom_mountver_load="NO" # Mount verification disk driver 210geom_nop_load="NO" # Transparent disk driver (see gnop(8)) 211geom_raid3_load="NO" # RAID3 disk driver (see graid3(8)) 212geom_shsec_load="NO" # Shared secret disk driver (see gshsec(8)) 213geom_stripe_load="NO" # RAID0 disk driver (see gstripe(8)) 214geom_uzip_load="NO" # Compressed disk images driver (see mkuzip(8)) 215geom_vinum_load="NO" # Concatenated/mirror/raid driver (see vinum(4)) 216 217 218############################################################## 219### FireWire modules ####################################### 220############################################################## 221 222firewire_load="NO" # IEEE1394 High-performance Serial Bus 223fwe_load="NO" # Ethernet emulation driver for FireWire 224fwip_load="NO" # IP over FireWire driver 225fwohci_load="NO" # OHCI FireWire chipset device driver 226sbp_load="NO" # SBP-2 Mass Storage Devices driver 227sbp_targ_load="NO" # SBP-2 Target mode 228 229 230############################################################## 231### Screen saver modules ################################### 232############################################################## 233 234# This is best done in rc.conf 235 236screensave_load="NO" # Set to YES to load a screensaver module 237screensave_name="green_saver" # Set to the name of the screensaver module 238 239 240############################################################## 241### Emulation modules ###################################### 242############################################################## 243 244ibcs2_load="NO" # IBCS2 (SCO) emulation 245ibcs2_coff_load="NO" 246linux_load="NO" # Linux emulation 247lindev_load="NO" # Linux-specific pseudo devices (see lindev(4)) 248svr4_load="NO" # SystemV R4 emulation 249streams_load="NO" # System V streams module 250 251 252############################################################## 253### Networking modules ##################################### 254############################################################## 255 256if_disc_load="NO" # Discard device 257if_ef_load="NO" # pseudo-device providing support for multiple 258 # ethernet frame types 259if_epair_load="NO" # Virtual b-t-b Ethernet-like interface pair 260if_faith_load="NO" # IPv6-to-IPv4 TCP relay capturing interface 261if_gif_load="NO" # generic tunnel interface 262if_gre_load="NO" # encapsulating network device 263if_stf_load="NO" # 6to4 tunnel interface 264if_tap_load="NO" # Ethernet tunnel software network interface 265if_tun_load="NO" # Tunnel driver (user process ppp) 266if_vlan_load="NO" # IEEE 802.1Q VLAN network interface 267ipfw_load="NO" # Firewall 268pf_load="NO" # packet filter 269 270 271############################################################## 272### Networking drivers ##################################### 273############################################################## 274 275bridgestp_load="NO" # if_bridge(4) support 276miibus_load="NO" # miibus support, needed for some drivers 277carp_load="NO" # carp(4) protocol 278if_ae_load="NO" # Attansic/Atheros L2 FastEthernet 279if_age_load="NO" # Attansic/Atheros L1 Gigabit Ethernet 280if_alc_load="NO" # Atheros AR8131/AR8132 Ethernet 281if_ale_load="NO" # Atheros AR8121/AR8113/AR8114 Ethernet 282if_an_load="NO" # Aironet 4500/4800 802.11 wireless NICs 283if_ath_load="NO" # Atheros IEEE 802.11 wireless NICs 284if_aue_load="NO" # ADMtek AN986 Pegasus USB Ethernet 285if_axe_load="NO" # ASIX Electronics AX88172 USB Ethernet 286if_bce_load="NO" # Broadcom NetXtreme II Gigabit Ethernet 287if_bfe_load="NO" # Broadcom BCM4401 288if_bge_load="NO" # Broadcom BCM570x PCI Gigabit Ethernet 289if_bridge_load="NO" # if_bridge(4) devices 290if_bwi_load="NO" # Broadcom BCM53xx IEEE 802.11b/g wireness NICs 291if_bwn_load="NO" # Broadcom BCM43xx IEEE 802.11 wireless NICs 292if_bxe_load="NO" # Broadcom NetXtreme II 10Gb Ethernet 293if_cas_load="NO" # Sun Cassini/Cassini+ and NS DP83065 Saturn 294if_cm_load="NO" # SMC (90c26, 90c56, 90c66) 295if_cs_load="NO" # Crystal Semiconductor CS8920 296if_cue_load="NO" # CATC USB-EL1210A USB Ethernet 297if_cxgb_load="NO" # Chelsio T3 10 Gigabit Ethernet 298if_dc_load="NO" # DEC/Intel 21143 and various workalikes 299if_de_load="NO" # DEC DC21x4x Ethernet 300if_ed_load="NO" # National Semiconductor DS8390/WD83C690 301 # Ethernet 302if_em_load="NO" # Intel(R) PRO/1000 Gigabit Ethernet 303if_en_load="NO" # Midway-based ATM interfaces 304if_ep_load="NO" # 3Com Etherlink III (3c5x9) 305if_et_load="NO" # Agere ET1310 10/100/Gigabit Ethernet 306if_ex_load="NO" # Intel EtherExpress Pro/10 Ethernet 307if_fatm_load="NO" # Fore PCA200E ATM 308if_fe_load="NO" # Fujitsu MB86960A/MB86965A based Ethernet 309 # adapters 310if_fxp_load="NO" # Intel EtherExpress PRO/100B (82557, 82558) 311if_gem_load="NO" # Sun GEM/Sun ERI/Apple GMAC 312if_hatm_load="NO" # Fore/Marconi HE155 and HE622 313if_hme_load="NO" # Sun Microelectronics STP2002-STQ Ethernet 314if_ie_load="NO" # Intel 82586 315if_igb_load="NO" # Intel(R) PRO/1000 Gigabit Ethernet 316if_ipw_load="NO" # Intel PRO/Wireless 2100 wireless 317if_iwi_load="NO" # Intel PRO/Wireless 2200BG/2225BG/2915ABG 318 # wireless 319if_iwn_load="NO" # Intel Wireless WiFi Link 802.11n wireless 320if_ixgb_load="NO" # Intel PRO/10Gb Ethernet 321if_ixgbe_load="NO" # Intel PRO/10Gb Ethernet PCI Express 322if_jme_load="NO" # JMicron JMC250 Gigabit/JMC260 Fast Ethernet 323if_lagg_load="NO" # lagg(4) devices 324if_le_load="NO" # AMD Am7900 LANCE and Am79C9xx PCnet 325if_lge_load="NO" # Level 1 LXT1001 NetCellerator PCI Gigabit 326 # Ethernet 327if_malo_load="NO" # Marvell Libertas 88W8335 802.11 wireless 328 # adapter 329if_msk_load="NO" # Marvell/SysKonnect Yukon II Gigabit Ethernet 330if_mxge_load="NO" # Myricom Myri10GE 10Gb Ethernet 331if_my_load="NO" # Myson PCI Fast Ethernet 332if_nfe_load="NO" # NVIDIA nForce MCP Networking Adapter 333if_nge_load="NO" # National Semiconductor PCI Gigabit Ethernet 334if_nve_load="NO" # NVIDIA nForce MCP Networking Adapter 335if_nxge_load="NO" # Neterion Xframe 10Gb Ethernet 336if_patm_load="NO" # IDT77252 ATM 337if_pcn_load="NO" # AMD PCnet PCI 338if_ral_load="NO" # Ralink Technology wireless 339if_re_load="NO" # RealTek 8139C+/8169/8169S/8110S 340if_rl_load="NO" # RealTek 8129/8139 341if_rue_load="NO" # RealTek RTL8150 USB to Fast Ethernet 342if_rum_load="NO" # Ralink Technology USB 802.11a/b/g wireless 343if_run_load="NO" # Ralink Technology USB 802.11a/g/n wireless 344if_sbni_load="NO" # Granch SBNI12 leased line adapters 345if_sf_load="NO" # Adaptec Duralink PCI (AIC-6915 "starfire") 346if_sge_load="NO" # Silicon Integrated Systems SiS 190/191 347if_sis_load="NO" # Silicon Integrated Systems SiS 900/7016 348if_sk_load="NO" # SysKonnect SK-984x series PCI Gigabit Ethernet 349if_sn_load="NO" # SMC 91Cxx 350if_ste_load="NO" # Sundance Technologies ST201 Fast Ethernet 351if_stge_load="NO" # Sundance/Tamarack TC9021 Gigabit Ethernet 352if_ti_load="NO" # Alteon Networks Tigon 1 and Tigon 2 353if_tl_load="NO" # Texas Instruments TNETE100 ("ThunderLAN") 354if_tx_load="NO" # SMC 83c17x Fast Ethernet 355if_txp_load="NO" # 3Com 3XP Typhoon/Sidewinder (3CR990) 356if_vge_load="NO" # VIA VT6122 PCI Gigabit Ethernet 357if_vte_load="NO" # DM&P Vortex86 RDC R6040 Fast Ethernet 358if_uath_load="NO" # Atheros USB wireless for AR5005UG & AR5005UX 359if_udav_load="NO" # Davicom DM9601 USB Ethernet 360if_upgt_load="NO" # Conexant/Intersil PrismGT USB wireless 361if_ural_load="NO" # Ralink Technology USB wireless 362if_urtw_load="NO" # Realtek 8187L USB wireless 363if_vr_load="NO" # VIA Rhine I and Rhine II 364if_vx_load="NO" # 3Com 3C590 family 365if_wb_load="NO" # Winbond W89C840F 366if_wi_load="NO" # WaveLAN/IEEE 802.11 wireless NICs 367if_wpi_load="NO" # Intel 3945ABG Wireless LAN IEEE 802.11 368if_xe_load="NO" # Xircom CreditCard PCMCIA 369if_xl_load="NO" # 3Com Etherlink XL (3c900, 3c905, 3c905B) 370utopia_load="NO" # ATM PHY driver 371 372############################################################## 373### Netgraph modules ####################################### 374############################################################## 375 376ng_UI_load="NO" # UI netgraph node type 377ng_async_load="NO" # asynchronous framing netgraph node type 378ng_bpf_load="NO" # Berkeley packet filter netgraph node type 379ng_bridge_load="NO" # Ethernet bridging netgraph node type 380ng_cisco_load="NO" # Cisco HDLC protocol netgraph node type 381ng_echo_load="NO" # Netgraph echo node type 382ng_eiface_load="NO" # generic Ethernet interface netgraph node type 383ng_etf_load="NO" # Ethertype filtering netgraph node type 384ng_ether_load="NO" # Ethernet netgraph node type 385ng_fec_load="NO" # netgraph Fast EtherChannel node 386ng_frame_relay_load="NO" # frame relay netgraph node type 387ng_gif_load="NO" # generic tunnel interface netgraph node type 388ng_gif_demux_load="NO" # demultiplexer for packets from ng_gif(4) nodes 389ng_hole_load="NO" # Netgraph discard node type 390ng_hub_load="NO" # packet distribution netgraph node type 391ng_iface_load="NO" # interface Netgraph node type 392ng_ip_input_load="NO" # netgraph IP input node type 393ng_ksocket_load="NO" # kernel socket netgraph node type 394ng_l2tp_load="NO" # L2TP protocol netgraph node type 395ng_lmi_load="NO" # frame relay LMI protocol netgraph node type 396ng_mppc_load="NO" # Microsoft MPPC/MPPE compression and 397 # encryption netgraph node type 398ng_netflow_load="NO" # Cisco's NetFlow netgraph node type 399ng_one2many_load="NO" # packet multiplexing netgraph node type 400ng_ppp_load="NO" # PPP protocol netgraph node type 401ng_pppoe_load="NO" # RFC 2516 PPPOE protocol netgraph node type 402ng_pptpgre_load="NO" # PPTP GRE protocol netgraph node type 403ng_rfc1490_load="NO" # RFC 1490 netgraph node type 404ng_socket_load="NO" # Netgraph socket node type 405ng_split_load="NO" # netgraph node to separate incoming and 406 # outgoing flows 407ng_sppp_load="NO" # sppp netgraph node type 408ng_tee_load="NO" # Netgraph ``tee'' node type 409ng_tty_load="NO" # Netgraph node type that is also a line 410 # discipline 411ng_vjc_load="NO" # Van Jacobsen compression netgraph node type 412ng_vlan_load="NO" # IEEE 802.1Q VLAN tagging netgraph node type 413 414############################################################## 415### Sound modules ########################################## 416############################################################## 417 418sound_load="NO" # Digital sound subsystem 419snd_ad1816_load="NO" # ad1816 420snd_als4000_load="NO" # als4000 421snd_atiixp_load="NO" # atiixp 422snd_cmi_load="NO" # cmi 423snd_cs4281_load="NO" # cs4281 424snd_csa_load="NO" # csa 425snd_ds1_load="NO" # ds1 426snd_emu10k1_load="NO" # Creative Sound Blaster Live 427snd_emu10kx_load="NO" # Creative SoundBlaster Live! and Audigy 428snd_envy24_load="NO" # VIA Envy24 429snd_envy24ht_load="NO" # VIA Envy24HT 430snd_es137x_load="NO" # es137x 431snd_ess_load="NO" # ess 432snd_fm801_load="NO" # fm801 433snd_hda_load="NO" # Intel High Definition Audio (Controller) 434snd_ich_load="NO" # Intel ICH 435snd_maestro_load="NO" # Maestro 436snd_maestro3_load="NO" # Maestro3 437snd_mss_load="NO" # Mss 438snd_neomagic_load="NO" # Neomagic 439snd_sb16_load="NO" # Sound Blaster 16 440snd_sb8_load="NO" # Sound Blaster Pro 441snd_sbc_load="NO" # Sbc 442snd_solo_load="NO" # Solo 443snd_spicds_load="NO" # SPI codecs 444snd_t4dwave_load="NO" # t4dwave 445snd_via8233_load="NO" # via8233 446snd_via82c686_load="NO" # via82c686 447snd_vibes_load="NO" # vibes 448snd_driver_load="NO" # All sound drivers 449 450############################################################## 451### USB modules ############################################ 452############################################################## 453 454usb_load="NO" # USB subsystem 455udbp_load="NO" # USB double bulk pipe host 2 host cables 456ugen_load="NO" # USB generic device, if all else fails ... 457ucycom_load="NO" # Cyprus USB serial adapters 458ufm_load="NO" # Fm Radio 459uhid_load="NO" # Human Interface Devices 460ukbd_load="NO" # Keyboard 461ulpt_load="NO" # Printer 462ums_load="NO" # Mouse 463umass_load="NO" # Mass Storage Devices 464umct_load="NO" # Magic Control Technology USB-RS232 465umodem_load="NO" # Modems 466uplcom_load="NO" # Prolific USB serial adapters 467urio_load="NO" # Rio MP3 players 468uvisor_load="NO" # PalmOS based PDAs 469if_aue_load="NO" # ADMtek USB ethernet 470if_axe_load="NO" # ASIX Electronics AX88172 USB ethernet 471if_cdce_load="NO" # Ethernet over USB (CDC) 472if_cue_load="NO" # CATC USB ethernet 473if_kue_load="NO" # Kawasaki LSI USB ethernet 474if_rae_load="NO" # Realtek RTL8150 USB adapter. 475if_rum_load="NO" # Ralink USB 802.11 wireless adapter 476if_uath_load="NO" # Atheros AR5523 wireless adapter 477if_run_load="NO" # Ralink USB 802.11 wireless adapter 478if_ural_load="NO" # Ralink RT2500USB 802.11 wireless adapter 479if_zyd_load="NO" # ZyDAS ZD1211(B) USB 802.11 wireless adapter 480snd_uaudio_load="NO" # USB audio 481 482############################################################## 483### Other modules ########################################## 484############################################################## 485 486aio_load="NO" # Asynchronous I/O 487bktr_load="NO" # Brooktree Bt848/Bt878 TV/Video Capture Card 488ispfw_load="NO" # Qlogic ISP Firmware 489agp_load="NO" # agp module 490accf_data_load="NO" # Wait for data accept filter 491accf_dns_load="NO" # Wait for full DNS request accept filter 492accf_http_load="NO" # Wait for full HTTP request accept filter 493ppi_load="NO" # Interface to ppbus parallel 'geek' port 494pps_load="NO" # Pulse per second devices 495puc_load="NO" # PCI "Universal" Communications driver 496random_load="NO" # Random device 497speaker_load="NO" # AT speaker module 498coretemp_load="NO" # Intel Core CPU temperature monitor 499vkbd_load="NO" # Virtual AT keyboard interface 500vpd_load="NO" # Vital Product Data kernel interface 501vpo_load="NO" # Parallel to SCSI interface driver 502amdtemp_load="NO" # AMD K8/K10/K11 temperature monitor 503tpm_load="NO" # Trusted Platform Module 504wbwd_load="NO" # Winbond watchdog 505 506############################################################## 507### ACPI settings ########################################## 508############################################################## 509 510acpi_dsdt_load="NO" # DSDT Overriding 511acpi_dsdt_type="acpi_dsdt" # Don't change this 512acpi_dsdt_name="/boot/acpi_dsdt.aml" 513 # Override DSDT in BIOS by this file 514acpi_video_load="NO" # Load the ACPI video extension driver 515 516############################################################## 517### TrustedBSD MAC settings ################################## 518############################################################## 519 520mac_biba_load="NO" # Biba MAC policy 521mac_bsdextended_load="NO" # BSD/extended MAC policy 522mac_ifoff="NO" # Interface silencing policy 523mac_mls_load="NO" # MLS MAC policy 524mac_none_load="NO" # Null MAC policy 525mac_partition_load="NO" # Partition MAC policy 526mac_seeotheruids_load="NO" # UID visbility MAC policy 527 528############################################################## 529### Module loading syntax example ########################## 530############################################################## 531 532#module_load="YES" # loads module "module" 533#module_name="realname" # uses "realname" instead of "module" 534#module_type="type" # passes "-t type" to load 535#module_flags="flags" # passes "flags" to the module 536#module_before="cmd" # executes "cmd" before loading the module 537#module_after="cmd" # executes "cmd" after loading the module 538#module_error="cmd" # executes "cmd" if load fails 539
