wandboard-dual.dts revision 273661 
1/*
2 * Copyright (c) 2013 Ian Lepore
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 * 1. Redistributions of source code must retain the above copyright
9 *    notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 *    notice, this list of conditions and the following disclaimer in the
12 *    documentation and/or other materials provided with the distribution.
13 *
14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
24 * SUCH DAMAGE.
25 *
26 * Wandboard Dual.
27 *
28 * $FreeBSD: stable/10/sys/boot/fdt/dts/arm/wandboard-dual.dts 273661 2014-10-26 02:37:42Z ian $
29 */
30
31/dts-v1/;
32/include/ "imx6.dtsi"
33
34/ {
35	#address-cells = <1>;
36	#size-cells = <1>;
37
38	model = "Wandboard Dual";
39	compatible = "wand,imx6d-wandboard", "fsl,imx6d";
40
41	memory {
42		reg = <0x10000000 0x40000000>; /* RAM 1GB */
43	};
44
45	SOC: soc@00000000 {
46		aips@02000000 { /* AIPS1 */
47			iomux@020e0000		{ status = "disabled"; };
48			gpio@0209c000		{ status = "okay"; };
49			gpio@020a0000		{ status = "okay"; };
50			gpio@020a4000		{ status = "okay"; };
51			gpio@020a8000		{ status = "okay"; };
52			gpio@020aC000		{ status = "okay"; };
53			gpio@020b0000		{ status = "okay"; };
54			gpio@020b4000		{ status = "okay"; };
55			console:serial@02020000 { status = "okay"; };
56			serial@021e8000		{ status = "disabled"; };
57			serial@021ec000		{ status = "disabled"; };
58			serial@021f0000		{ status = "disabled"; };
59			serial@021f4000		{ status = "disabled"; };
60			usbphy@020c9000		{ status = "okay"; };
61			usbphy@020ca000		{ status = "okay"; };
62		};
63		aips@02100000 { /* AIPS2 */
64			ethernet@02188000	{
65				status = "okay";
66				phy-mode = "rgmii";
67				phy-disable-preamble;
68			};
69			usb@02184000		{ status = "okay"; };
70			usb@02184200		{ status = "okay"; };
71			usb@02184400		{ status = "disabled"; };
72			usb@02184600		{ status = "disabled"; };
73			usdhc@02190000		{ status = "okay"; };
74			usdhc@02194000		{ status = "disabled"; };
75			usdhc@02198000		{ status = "okay"; };
76			usdhc@0219c000		{ status = "disabled"; };
77		};
78	};
79
80	chosen {
81		stdin = &console;
82		stdout = &console;
83	};
84};
85