RADXA revision 266085 
1# RADXA -- Custom configuration for the RADXA ARM development
2# platform, check out http://www.radxa.com
3#
4# For more information on this file, please read the handbook section on
5# Kernel Configuration Files:
6#
7#    http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
8#
9# The handbook is also available locally in /usr/share/doc/handbook
10# if you've installed the doc distribution, otherwise always see the
11# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
12# latest information.
13#
14# An exhaustive list of options and more detailed explanations of the
15# device lines is also present in the ../../conf/NOTES and NOTES files.
16# If you are in doubt as to the purpose or necessity of a line, check first
17# in NOTES.
18#
19# $FreeBSD: stable/10/sys/arm/conf/RADXA 266085 2014-05-14 20:11:20Z ian $
20
21ident		RADXA
22
23include		"../rockchip/std.rk30xx"
24
25makeoptions	MODULES_OVERRIDE=""
26makeoptions	WITHOUT_MODULES="ahc"
27
28options		HZ=100
29options		SCHED_4BSD		#4BSD scheduler
30options		INET			#InterNETworking
31options		INET6			#IPv6 communications protocols
32options		FFS			#Berkeley Fast Filesystem
33options		SOFTUPDATES		#Enable FFS soft updates support
34options		UFS_ACL			#Support for access control lists
35options		UFS_DIRHASH		#Improve performance on big directories
36options		MSDOSFS			#MSDOS Filesystem
37options		CD9660			#ISO 9660 Filesystem
38options		PROCFS			#Process filesystem (requires PSEUDOFS)
39options		PSEUDOFS		#Pseudo-filesystem framework
40options		COMPAT_43		#Compatible with BSD 4.3 [KEEP THIS!]
41options		SCSI_DELAY=5000		#Delay (in ms) before probing SCSI
42options		KTRACE			#ktrace(1) support
43options		SYSVSHM			#SYSV-style shared memory
44options		SYSVMSG			#SYSV-style message queues
45options		SYSVSEM			#SYSV-style semaphores
46options		_KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
47options		KBD_INSTALL_CDEV	# install a CDEV entry in /dev
48options		PREEMPTION
49options		FREEBSD_BOOT_LOADER
50options		VFP		# vfp/neon
51
52# Debugging
53makeoptions	DEBUG=-g		#Build kernel with gdb(1) debug symbols
54options		BREAK_TO_DEBUGGER
55#options	VERBOSE_SYSINIT		#Enable verbose sysinit messages
56options		KDB
57options		DDB			#Enable the kernel debugger
58#options	INVARIANTS		#Enable calls of extra sanity checking
59#options	INVARIANT_SUPPORT	#Extra sanity checks of internal structures, required by INVARIANTS
60options		WITNESS			#Enable checks to detect deadlocks and cycles
61options		WITNESS_SKIPSPIN	#Don't run witness on spinlocks for speed
62options		DIAGNOSTIC
63
64# NFS support
65#options	NFSCL
66#options	NFSSERVER		#Network Filesystem Server
67#options	NFSCLIENT		#Network Filesystem Client
68
69# MMC/SD/SDIO card slot support
70#device		mmc			# mmc/sd bus
71#device		mmcsd			# mmc/sd flash cards
72
73# Boot device is 2nd slice on MMC/SD card
74options		ROOTDEVNAME=\"ufs:/dev/da0s2\"
75
76# Console and misc
77device		uart
78device		uart_ns8250
79device		pty
80device		snp
81device		md
82device		random			# Entropy device
83
84# I2C support
85#device		iicbus
86#device		iic
87
88# GPIO
89device		gpio
90
91device		scbus			# SCSI bus (required for SCSI)
92device		da			# Direct Access (disks)
93device		pass
94
95# USB support
96device		usb
97options		USB_DEBUG
98#options	USB_REQ_DEBUG
99#options	USB_VERBOSE
100device		dwcotg			#DWC OTG controller
101
102device		umass
103
104# Ethernet
105device		loop
106device		ether
107device		mii
108device		smscphy
109device		bpf
110
111# USB ethernet support, requires miibus
112device		miibus
113device		udav
114
115# Flattened Device Tree
116options		FDT
117options		FDT_DTB_STATIC
118makeoptions	FDT_DTS_FILE=rk3188-radxa.dts
119
120