Copyright (c) 2001-2002 Maksim Yevmenkin <m_evmenkin@yahoo.com>
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
$Id: ng_bluetooth.4,v 1.3 2003/05/21 19:37:35 max Exp $
$FreeBSD$
.Dd November 9, 2002 .Dt NG_BLUETOOTH 4 .Os .Sh NAME .Nm ng_bluetooth .Nd placeholder for global Bluetooth variables .Sh SYNOPSIS n sys/types.h n netgraph/bluetooth/include/ng_bluetooth.h .Sh DESCRIPTION The .Nm module is a placeholder for global Bluetooth variables. All Bluetooth variables can be examined and changed via .Xr sysctl 8 . .Ss Bluetooth Variables Below is the description of default variables. Each Bluetooth module might add its own variables to the tree. l -tag -width foo t Va net.bluetooth.version A read-only integer variable that shows the current version of the Bluetooth stack. t Va net.bluetooth.hci.command_timeout A read-write integer variable that controls the Host Controller Interface (HCI) command timeout (in seconds), i.e., how long the HCI layer will wait for the .Dv Command_Complete or .Dv Command_Status event from a Bluetooth device. t Va net.bluetooth.hci.connection_timeout A read-write integer variable that controls the HCI connection timeout, i.e.\& how long the HCI layer will wait for the .Dv Connection_Complete event. Normally this should not be required as Bluetooth devices have connection timeout of their own and will send event back. This timeout is required to ensure that no connection will stall in case when the HCI transport layer is broken. Be careful when changing this variable. Make sure you understand what you are doing. t Va net.bluetooth.hci.max_neighbor_age A read-write integer variable that controls time-to-live (in seconds) for entries in the HCI neighbor cache. Every time a Bluetooth device performs an .Dv Inquiry operation, the results will be put in cache. Later when a Bluetooth device establishes a baseband connection, it will try to find the matching entry in the cache and use it. This might speed up establishment of the baseband connection. t Va net.bluetooth.l2cap.rtx_timeout A read-write integer variable that controls the Link Layer Control and Adaptation Protocol (L2CAP) Retransmission Timeout (RTX) (in seconds). Every time the L2CAP layer submits a control command, the RTX timeout is set. The value of the RTX timeout should be greater or equal to the value of the HCI connection timeout. Be careful when changing this variable. Make sure you understand what you are doing. t Va net.bluetooth.l2cap.ertx_timeout A read-write integer variable that controls the L2CAP Extended Retransmission Timeout (ERTX) (in seconds). In some cases remote peer may respond with .Dv PENDING status to the L2CAP control command. In this case the L2CAP command timeout is reset to the ERTX timeout value. The value of the ERTX timeout should be greater or equal to the value of the RTX timeout. Be careful when changing this variable. Make sure you understand what you are doing. .El .Sh SEE ALSO .Xr ng_btsocket 4 , .Xr ng_hci 4 , .Xr ng_l2cap 4 , .Xr sysctl 8 .Sh HISTORY The .Nm module was implemented in .Fx 5.0 . .Sh AUTHORS .An Maksim Yevmenkin Aq m_evmenkin@yahoo.com
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
$Id: ng_bluetooth.4,v 1.3 2003/05/21 19:37:35 max Exp $
$FreeBSD$
.Dd November 9, 2002 .Dt NG_BLUETOOTH 4 .Os .Sh NAME .Nm ng_bluetooth .Nd placeholder for global Bluetooth variables .Sh SYNOPSIS n sys/types.h n netgraph/bluetooth/include/ng_bluetooth.h .Sh DESCRIPTION The .Nm module is a placeholder for global Bluetooth variables. All Bluetooth variables can be examined and changed via .Xr sysctl 8 . .Ss Bluetooth Variables Below is the description of default variables. Each Bluetooth module might add its own variables to the tree. l -tag -width foo t Va net.bluetooth.version A read-only integer variable that shows the current version of the Bluetooth stack. t Va net.bluetooth.hci.command_timeout A read-write integer variable that controls the Host Controller Interface (HCI) command timeout (in seconds), i.e., how long the HCI layer will wait for the .Dv Command_Complete or .Dv Command_Status event from a Bluetooth device. t Va net.bluetooth.hci.connection_timeout A read-write integer variable that controls the HCI connection timeout, i.e.\& how long the HCI layer will wait for the .Dv Connection_Complete event. Normally this should not be required as Bluetooth devices have connection timeout of their own and will send event back. This timeout is required to ensure that no connection will stall in case when the HCI transport layer is broken. Be careful when changing this variable. Make sure you understand what you are doing. t Va net.bluetooth.hci.max_neighbor_age A read-write integer variable that controls time-to-live (in seconds) for entries in the HCI neighbor cache. Every time a Bluetooth device performs an .Dv Inquiry operation, the results will be put in cache. Later when a Bluetooth device establishes a baseband connection, it will try to find the matching entry in the cache and use it. This might speed up establishment of the baseband connection. t Va net.bluetooth.l2cap.rtx_timeout A read-write integer variable that controls the Link Layer Control and Adaptation Protocol (L2CAP) Retransmission Timeout (RTX) (in seconds). Every time the L2CAP layer submits a control command, the RTX timeout is set. The value of the RTX timeout should be greater or equal to the value of the HCI connection timeout. Be careful when changing this variable. Make sure you understand what you are doing. t Va net.bluetooth.l2cap.ertx_timeout A read-write integer variable that controls the L2CAP Extended Retransmission Timeout (ERTX) (in seconds). In some cases remote peer may respond with .Dv PENDING status to the L2CAP control command. In this case the L2CAP command timeout is reset to the ERTX timeout value. The value of the ERTX timeout should be greater or equal to the value of the RTX timeout. Be careful when changing this variable. Make sure you understand what you are doing. .El .Sh SEE ALSO .Xr ng_btsocket 4 , .Xr ng_hci 4 , .Xr ng_l2cap 4 , .Xr sysctl 8 .Sh HISTORY The .Nm module was implemented in .Fx 5.0 . .Sh AUTHORS .An Maksim Yevmenkin Aq m_evmenkin@yahoo.com