rc.conf revision 272078
1#!/bin/sh
2
3# This is rc.conf - a file full of useful variables that you can set
4# to change the default startup behavior of your system.  You should
5# not edit this file!  Put any overrides into one of the ${rc_conf_files}
6# instead and you will be able to update these defaults later without
7# spamming your local configuration information.
8#
9# The ${rc_conf_files} files should only contain values which override
10# values set in this file.  This eases the upgrade path when defaults
11# are changed and new features are added.
12#
13# All arguments must be in double or single quotes.
14#
15# For a more detailed explanation of all the rc.conf variables, please
16# refer to the rc.conf(5) manual page.
17#
18# $FreeBSD: stable/10/etc/defaults/rc.conf 272078 2014-09-24 19:30:36Z peter $
19
20##############################################################
21###  Important initial Boot-time options  ####################
22##############################################################
23
24rc_debug="NO"		# Set to YES to enable debugging output from rc.d
25rc_info="NO"		# Enables display of informational messages at boot.
26rc_startmsgs="YES" 	# Show "Starting foo:" messages at boot
27rcshutdown_timeout="90" # Seconds to wait before terminating rc.shutdown
28early_late_divider="FILESYSTEMS"	# Script that separates early/late
29			# stages of the boot process.  Make sure you know
30			# the ramifications if you change this.
31			# See rc.conf(5) for more details.
32always_force_depends="NO"	# Set to check that indicated dependencies are
33				# running during boot (can increase boot time).
34
35apm_enable="NO"		# Set to YES to enable APM BIOS functions (or NO).
36apmd_enable="NO"	# Run apmd to handle APM event from userland.
37apmd_flags=""		# Flags to apmd (if enabled).
38ddb_enable="NO"		# Set to YES to load ddb scripts at boot.
39ddb_config="/etc/ddb.conf"	# ddb(8) config file.
40devd_enable="YES" 	# Run devd, to trigger programs on device tree changes.
41devd_flags=""		# Additional flags for devd(8).
42#kld_list="" 		# Kernel modules to load after local disks are mounted
43kldxref_enable="NO"	# Build linker.hints files with kldxref(8).
44kldxref_clobber="NO"	# Overwrite old linker.hints at boot.
45kldxref_module_path=""	# Override kern.module_path. A ';'-delimited list.
46powerd_enable="NO" 	# Run powerd to lower our power usage.
47powerd_flags=""		# Flags to powerd (if enabled).
48tmpmfs="AUTO"		# Set to YES to always create an mfs /tmp, NO to never
49tmpsize="20m"		# Size of mfs /tmp if created
50tmpmfs_flags="-S"	# Extra mdmfs options for the mfs /tmp
51varmfs="AUTO"		# Set to YES to always create an mfs /var, NO to never
52varsize="32m"		# Size of mfs /var if created
53varmfs_flags="-S"	# Extra mount options for the mfs /var
54populate_var="AUTO"	# Set to YES to always (re)populate /var, NO to never
55cleanvar_enable="YES" 	# Clean the /var directory
56local_startup="/usr/local/etc/rc.d" # startup script dirs.
57script_name_sep=" "	# Change if your startup scripts' names contain spaces
58rc_conf_files="/etc/rc.conf /etc/rc.conf.local"
59
60# ZFS support
61zfs_enable="NO"		# Set to YES to automatically mount ZFS file systems
62
63gptboot_enable="YES"	# GPT boot success/failure reporting.
64
65# Experimental - test before enabling
66gbde_autoattach_all="NO" # YES automatically mounts gbde devices from fstab
67gbde_devices="NO" 	# Devices to automatically attach (list, or AUTO)
68gbde_attach_attempts="3" # Number of times to attempt attaching gbde devices
69gbde_lockdir="/etc"	# Where to look for gbde lockfiles
70
71# GELI disk encryption configuration.
72geli_devices=""		# List of devices to automatically attach in addition to
73			# GELI devices listed in /etc/fstab.
74geli_tries=""		# Number of times to attempt attaching geli device.
75			# If empty, kern.geom.eli.tries will be used.
76geli_default_flags=""	# Default flags for geli(8).
77geli_autodetach="YES"	# Automatically detach on last close.
78			# Providers are marked as such when all file systems are
79			# mounted.
80# Example use.
81#geli_devices="da1 mirror/home"
82#geli_da1_flags="-p -k /etc/geli/da1.keys"
83#geli_da1_autodetach="NO"
84#geli_mirror_home_flags="-k /etc/geli/home.keys"
85
86root_rw_mount="YES"	# Set to NO to inhibit remounting root read-write.
87fsck_y_enable="NO"	# Set to YES to do fsck -y if the initial preen fails.
88fsck_y_flags=""		# Additional flags for fsck -y
89background_fsck="YES"	# Attempt to run fsck in the background where possible.
90background_fsck_delay="60" # Time to wait (seconds) before starting the fsck.
91netfs_types="nfs:NFS oldnfs:OLDNFS smbfs:SMB" # Net filesystems.
92extra_netfs_types="NO"	# List of network extra filesystem types for delayed
93			# mount at startup (or NO).
94
95##############################################################
96###  Network configuration sub-section  ######################
97##############################################################
98
99### Basic network and firewall/security options: ###
100hostname=""			# Set this!
101hostid_enable="YES"		# Set host UUID.
102hostid_file="/etc/hostid"	# File with hostuuid.
103nisdomainname="NO"		# Set to NIS domain if using NIS (or NO).
104dhclient_program="/sbin/dhclient"	# Path to dhcp client program.
105dhclient_flags=""		# Extra flags to pass to dhcp client.
106#dhclient_flags_fxp0=""		# Extra dhclient flags for fxp0 only
107background_dhclient="NO"	# Start dhcp client in the background.
108#background_dhclient_fxp0="YES"	# Start dhcp client on fxp0 in the background.
109synchronous_dhclient="NO"	# Start dhclient directly on configured
110				# interfaces during startup.
111defaultroute_delay="30"		# Time to wait for a default route on a DHCP interface.
112defaultroute_carrier_delay="5"	# Time to wait for carrier while waiting for a default route.
113wpa_supplicant_program="/usr/sbin/wpa_supplicant"
114wpa_supplicant_flags="-s"	# Extra flags to pass to wpa_supplicant
115wpa_supplicant_conf_file="/etc/wpa_supplicant.conf"
116#
117firewall_enable="NO"		# Set to YES to enable firewall functionality
118firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall
119firewall_type="UNKNOWN"		# Firewall type (see /etc/rc.firewall)
120firewall_quiet="NO"		# Set to YES to suppress rule display
121firewall_logging="NO"		# Set to YES to enable events logging
122firewall_logif="NO"		# Set to YES to create logging-pseudo interface
123firewall_flags=""		# Flags passed to ipfw when type is a file
124firewall_coscripts=""		# List of executables/scripts to run after
125				# firewall starts/stops
126firewall_client_net="192.0.2.0/24" # IPv4 Network address for "client"
127				# firewall.
128#firewall_client_net_ipv6="2001:db8:2:1::/64" # IPv6 network prefix for
129				# "client" firewall.
130firewall_simple_iif="ed1"	# Inside network interface for "simple"
131				# firewall.
132firewall_simple_inet="192.0.2.16/28" # Inside network address for "simple"
133				# firewall.
134firewall_simple_oif="ed0"	# Outside network interface for "simple"
135				# firewall.
136firewall_simple_onet="192.0.2.0/28" # Outside network address for "simple"
137				# firewall.
138#firewall_simple_iif_ipv6="ed1"	# Inside IPv6 network interface for "simple"
139				# firewall.
140#firewall_simple_inet_ipv6="2001:db8:2:800::/56" # Inside IPv6 network prefix
141				# for "simple" firewall.
142#firewall_simple_oif_ipv6="ed0"	# Outside IPv6 network interface for "simple"
143				# firewall.
144#firewall_simple_onet_ipv6="2001:db8:2:0::/56" # Outside IPv6 network prefix
145				# for "simple" firewall.
146firewall_myservices=""		# List of TCP ports on which this host
147				# offers services for "workstation" firewall.
148firewall_allowservices=""	# List of IPs which have access to
149				# $firewall_myservices for "workstation"
150				# firewall.
151firewall_trusted=""		# List of IPs which have full access to this
152				# host for "workstation" firewall.
153firewall_logdeny="NO"		# Set to YES to log default denied incoming
154				# packets for "workstation" firewall.
155firewall_nologports="135-139,445 1026,1027 1433,1434" # List of TCP/UDP ports
156				# for which denied incoming packets are not
157				# logged for "workstation" firewall.
158firewall_nat_enable="NO"	# Enable kernel NAT (if firewall_enable == YES)
159firewall_nat_interface=""	# Public interface or IPaddress to use
160firewall_nat_flags=""		# Additional configuration parameters
161dummynet_enable="NO"		# Load the dummynet(4) module
162ip_portrange_first="NO"		# Set first dynamically allocated port
163ip_portrange_last="NO"		# Set last dynamically allocated port
164ike_enable="NO"			# Enable IKE daemon (usually racoon or isakmpd)
165ike_program="/usr/local/sbin/isakmpd"	# Path to IKE daemon
166ike_flags=""			# Additional flags for IKE daemon
167ipsec_enable="NO"		# Set to YES to run setkey on ipsec_file
168ipsec_file="/etc/ipsec.conf"	# Name of config file for setkey
169natd_program="/sbin/natd"	# path to natd, if you want a different one.
170natd_enable="NO"		# Enable natd (if firewall_enable == YES).
171natd_interface=""		# Public interface or IPaddress to use.
172natd_flags=""			# Additional flags for natd.
173ipfilter_enable="NO"		# Set to YES to enable ipfilter functionality
174ipfilter_program="/sbin/ipf"	# where the ipfilter program lives
175ipfilter_rules="/etc/ipf.rules"	# rules definition file for ipfilter, see
176				# /usr/src/contrib/ipfilter/rules for examples
177ipfilter_flags=""		# additional flags for ipfilter
178ipnat_enable="NO"		# Set to YES to enable ipnat functionality
179ipnat_program="/sbin/ipnat"	# where the ipnat program lives
180ipnat_rules="/etc/ipnat.rules"	# rules definition file for ipnat
181ipnat_flags=""			# additional flags for ipnat
182ipmon_enable="NO"		# Set to YES for ipmon; needs ipfilter or ipnat
183ipmon_program="/sbin/ipmon"	# where the ipfilter monitor program lives
184ipmon_flags="-Ds"		# typically "-Ds" or "-D /var/log/ipflog"
185ipfs_enable="NO"		# Set to YES to enable saving and restoring
186				# of state tables at shutdown and boot
187ipfs_program="/sbin/ipfs"	# where the ipfs program lives
188ipfs_flags=""			# additional flags for ipfs
189pf_enable="NO"			# Set to YES to enable packet filter (pf)
190pf_rules="/etc/pf.conf"		# rules definition file for pf
191pf_program="/sbin/pfctl"	# where the pfctl program lives
192pf_flags=""			# additional flags for pfctl
193pflog_enable="NO"		# Set to YES to enable packet filter logging
194pflog_logfile="/var/log/pflog"	# where pflogd should store the logfile
195pflog_program="/sbin/pflogd"	# where the pflogd program lives
196pflog_flags=""			# additional flags for pflogd
197ftpproxy_enable="NO"		# Set to YES to enable ftp-proxy(8) for pf
198ftpproxy_flags=""		# additional flags for ftp-proxy(8)
199pfsync_enable="NO"		# Expose pf state to other hosts for syncing
200pfsync_syncdev=""		# Interface for pfsync to work through
201pfsync_syncpeer=""		# IP address of pfsync peer host
202pfsync_ifconfig=""		# Additional options to ifconfig(8) for pfsync
203tcp_extensions="YES"		# Set to NO to turn off RFC1323 extensions.
204log_in_vain="0"			# >=1 to log connects to ports w/o listeners.
205tcp_keepalive="YES"		# Enable stale TCP connection timeout (or NO).
206tcp_drop_synfin="NO"		# Set to YES to drop TCP packets with SYN+FIN
207				# NOTE: this violates the TCP specification
208icmp_drop_redirect="NO" 	# Set to YES to ignore ICMP REDIRECT packets
209icmp_log_redirect="NO"		# Set to YES to log ICMP REDIRECT packets
210network_interfaces="auto"	# List of network interfaces (or "auto").
211cloned_interfaces=""		# List of cloned network interfaces to create.
212#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config.
213#ifconfig_lo0="inet 127.0.0.1"	# default loopback device configuration.
214#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry.
215#ifconfig_ed0_ipx="ipx 0x00010010"	# Sample IPX address family entry.
216#ifconfig_ed0_ipv6="inet6 2001:db8:1::1 prefixlen 64" # Sample IPv6 addr entry
217#ifconfig_ed0_alias0="inet6 2001:db8:2::1 prefixlen 64" # Sample IPv6 alias
218#ifconfig_fxp0_name="net0"	# Change interface name from fxp0 to net0.
219#vlans_fxp0="101 vlan0"		# vlan(4) interfaces for fxp0 device
220#create_args_vlan0="vlan 102"	# vlan tag for vlan0 device
221#wlans_ath0="wlan0"		# wlan(4) interfaces for ath0 device
222#wlandebug_wlan0="scan+auth+assoc"	# Set debug flags with wlanddebug(8)
223#ipv4_addrs_fxp0="192.168.0.1/24 192.168.1.1-5/28" # example IPv4 address entry.
224#
225#autobridge_interfaces="bridge0"	# List of bridges to check
226#autobridge_bridge0="tap* vlan0"	# Interface glob to automatically add to the bridge
227#
228# If you have any sppp(4) interfaces above, you might also want to set
229# the following parameters.  Refer to spppcontrol(8) for their meaning.
230sppp_interfaces=""		# List of sppp interfaces.
231#sppp_interfaces="...0"		# example: sppp over ...
232#spppconfig_...0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'"
233gif_interfaces=""		# List of GIF tunnels.
234#gif_interfaces="gif0 gif1"	# Examples typically for a router.
235				# Choose correct tunnel addrs.
236#gifconfig_gif0="10.1.1.1 10.1.2.1"	# Examples typically for a router.
237#gifconfig_gif1="10.1.1.2 10.1.2.2"	# Examples typically for a router.
238fec_interfaces=""		# List of Fast EtherChannels.
239#fec_interfaces="fec0 fec1"
240#fecconfig_fec0="fxp0 dc0"	# Examples typically for two NICs
241#fecconfig_fec1="em0 em1 bge0 bge1"	# Examples typically for four NICs
242
243# User ppp configuration.
244ppp_enable="NO"		# Start user-ppp (or NO).
245ppp_program="/usr/sbin/ppp"	# Path to user-ppp program.
246ppp_mode="auto"		# Choice of "auto", "ddial", "direct" or "dedicated".
247			# For details see man page for ppp(8). Default is auto.
248ppp_nat="YES"		# Use PPP's internal network address translation or NO.
249ppp_profile="papchap"	# Which profile to use from /etc/ppp/ppp.conf.
250ppp_user="root"		# Which user to run ppp as
251
252# Start multiple instances of ppp at boot time
253#ppp_profile="profile1 profile2 profile3"	# Which profiles to use
254#ppp_profile1_mode="ddial"	# Override ppp mode for profile1
255#ppp_profile2_nat="NO"		# Override nat mode for profile2
256# profile3 uses default ppp_mode and ppp_nat
257
258### Network daemon (miscellaneous) ###
259hostapd_enable="NO"		# Run hostap daemon.
260syslogd_enable="YES"		# Run syslog daemon (or NO).
261syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one.
262syslogd_flags="-s"		# Flags to syslogd (if enabled).
263altlog_proglist=""		# List of chrooted applicatioins in /var
264inetd_enable="NO"		# Run the network daemon dispatcher (YES/NO).
265inetd_program="/usr/sbin/inetd"	# path to inetd, if you want a different one.
266inetd_flags="-wW -C 60"		# Optional flags to inetd
267iscsid_enable="NO"		# iSCSI initiator daemon.
268iscsictl_enable="NO"		# iSCSI initiator autostart.
269iscsictl_flags="-Aa"		# Optional flags to iscsictl.
270hastd_enable="NO"		# Run the HAST daemon (YES/NO).
271hastd_program="/sbin/hastd"	# path to hastd, if you want a different one.
272hastd_flags=""			# Optional flags to hastd.
273ctld_enable="NO"		# CAM Target Layer / iSCSI target daemon.
274local_unbound_enable="NO"	# local caching resolver
275
276#
277# kerberos. Do not run the admin daemons on slave servers
278#
279kerberos5_server_enable="NO"	# Run a kerberos 5 master server (or NO).
280kerberos5_server="/usr/libexec/kdc"	# path to kerberos 5 KDC
281kerberos5_server_flags="--detach"	# Additional flags to the kerberos 5 server
282kadmind5_server_enable="NO"	# Run kadmind (or NO)
283kadmind5_server="/usr/libexec/kadmind"	# path to kerberos 5 admin daemon
284kpasswdd_server_enable="NO"	# Run kpasswdd (or NO)
285kpasswdd_server="/usr/libexec/kpasswdd"	# path to kerberos 5 passwd daemon
286kfd_enable="NO"			# Run kfd (or NO)
287kfd_program="/usr/libexec/kfd"	# path to kerberos 5 kfd daemon
288
289gssd_enable="NO"		# Run the gssd daemon (or NO).
290gssd_flags=""			# Flags for gssd.
291
292rwhod_enable="NO"		# Run the rwho daemon (or NO).
293rwhod_flags=""			# Flags for rwhod
294rarpd_enable="NO"		# Run rarpd (or NO).
295rarpd_flags="-a"		# Flags to rarpd.
296bootparamd_enable="NO"		# Run bootparamd (or NO).
297bootparamd_flags=""		# Flags to bootparamd
298pppoed_enable="NO"		# Run the PPP over Ethernet daemon.
299pppoed_provider="*"		# Provider and ppp(8) config file entry.
300pppoed_flags="-P /var/run/pppoed.pid"	# Flags to pppoed (if enabled).
301pppoed_interface="fxp0"		# The interface that pppoed runs on.
302sshd_enable="NO"		# Enable sshd
303sshd_program="/usr/sbin/sshd"	# path to sshd, if you want a different one.
304sshd_flags=""			# Additional flags for sshd.
305ftpd_enable="NO"		# Enable stand-alone ftpd.
306ftpd_program="/usr/libexec/ftpd" # Path to ftpd, if you want a different one.
307ftpd_flags=""			# Additional flags to stand-alone ftpd.
308
309### Network daemon (NFS): All need rpcbind_enable="YES" ###
310amd_enable="NO"			# Run amd service with $amd_flags (or NO).
311amd_program="/usr/sbin/amd"	# path to amd, if you want a different one.
312amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map"
313amd_map_program="NO"		# Can be set to "ypcat -k amd.master"
314autofs_enable="NO"		# Run automountd(8)
315nfs_client_enable="NO"		# This host is an NFS client (or NO).
316nfs_access_cache="60"		# Client cache timeout in seconds
317nfs_server_enable="NO"		# This host is an NFS server (or NO).
318oldnfs_server_enable="NO"	# Run the old NFS server (YES/NO).
319nfs_server_flags="-u -t"	# Flags to nfsd (if enabled).
320mountd_enable="NO"		# Run mountd (or NO).
321mountd_flags="-r"		# Flags to mountd (if NFS server enabled).
322weak_mountd_authentication="NO"	# Allow non-root mount requests to be served.
323nfs_reserved_port_only="NO"	# Provide NFS only on secure port (or NO).
324nfs_bufpackets=""		# bufspace (in packets) for client
325rpc_lockd_enable="NO"		# Run NFS rpc.lockd needed for client/server.
326rpc_lockd_flags=""		# Flags to rpc.lockd (if enabled).
327rpc_statd_enable="NO"		# Run NFS rpc.statd needed for client/server.
328rpc_statd_flags=""		# Flags to rpc.statd (if enabled).
329rpcbind_enable="NO"		# Run the portmapper service (YES/NO).
330rpcbind_program="/usr/sbin/rpcbind"	# path to rpcbind, if you want a different one.
331rpcbind_flags=""		# Flags to rpcbind (if enabled).
332rpc_ypupdated_enable="NO"	# Run if NIS master and SecureRPC (or NO).
333keyserv_enable="NO"		# Run the SecureRPC keyserver (or NO).
334keyserv_flags=""		# Flags to keyserv (if enabled).
335nfsv4_server_enable="NO"	# Enable support for NFSv4
336nfscbd_enable="NO"		# NFSv4 client side callback daemon
337nfscbd_flags=""			# Flags for nfscbd
338nfsuserd_enable="NO"		# NFSv4 user/group name mapping daemon
339nfsuserd_flags=""		# Flags for nfsuserd
340
341### Network Time Services options: ###
342timed_enable="NO"		# Run the time daemon (or NO).
343timed_flags=""			# Flags to timed (if enabled).
344ntpdate_enable="NO"		# Run ntpdate to sync time on boot (or NO).
345ntpdate_program="/usr/sbin/ntpdate"	# path to ntpdate, if you want a different one.
346ntpdate_flags="-b"		# Flags to ntpdate (if enabled).
347ntpdate_config="/etc/ntp.conf"	# ntpdate(8) configuration file
348ntpdate_hosts=""		# Whitespace-separated list of ntpdate(8) servers.
349ntpd_enable="NO"		# Run ntpd Network Time Protocol (or NO).
350ntpd_program="/usr/sbin/ntpd"	# path to ntpd, if you want a different one.
351ntpd_config="/etc/ntp.conf"	# ntpd(8) configuration file
352ntpd_sync_on_start="NO"		# Sync time on ntpd startup, even if offset is high
353ntpd_flags="-p /var/run/ntpd.pid -f /var/db/ntpd.drift"
354				# Flags to ntpd (if enabled).
355
356# Network Information Services (NIS) options: All need rpcbind_enable="YES" ###
357nis_client_enable="NO"		# We're an NIS client (or NO).
358nis_client_flags=""		# Flags to ypbind (if enabled).
359nis_ypset_enable="NO"		# Run ypset at boot time (or NO).
360nis_ypset_flags=""		# Flags to ypset (if enabled).
361nis_server_enable="NO"		# We're an NIS server (or NO).
362nis_server_flags=""		# Flags to ypserv (if enabled).
363nis_ypxfrd_enable="NO"		# Run rpc.ypxfrd at boot time (or NO).
364nis_ypxfrd_flags=""		# Flags to rpc.ypxfrd (if enabled).
365nis_yppasswdd_enable="NO"	# Run rpc.yppasswdd at boot time (or NO).
366nis_yppasswdd_flags=""		# Flags to rpc.yppasswdd (if enabled).
367
368### SNMP daemon ###
369# Be sure to understand the security implications of running SNMP v1/v2
370# in your network.
371bsnmpd_enable="NO"		# Run the SNMP daemon (or NO).
372bsnmpd_flags=""			# Flags for bsnmpd.
373
374### Network routing options: ###
375defaultrouter="NO"		# Set to default gateway (or NO).
376static_arp_pairs=""		# Set to static ARP list (or leave empty).
377static_ndp_pairs=""		# Set to static NDP list (or leave empty).
378static_routes=""		# Set to static route list (or leave empty).
379natm_static_routes=""		# Set to static route list for NATM (or leave empty).
380gateway_enable="NO"		# Set to YES if this host will be a gateway.
381routed_enable="NO"		# Set to YES to enable a routing daemon.
382routed_program="/sbin/routed"	# Name of routing daemon to use if enabled.
383routed_flags="-q"		# Flags for routing daemon.
384mrouted_enable="NO"		# Do IPv4 multicast routing.
385mrouted_program="/usr/local/sbin/mrouted"	# Name of IPv4 multicast
386						# routing daemon.  You need to
387						# install it from package or
388						# port.
389mrouted_flags=""		# Flags for multicast routing daemon.
390ipxgateway_enable="NO"		# Set to YES to enable IPX routing.
391ipxrouted_enable="NO"		# Set to YES to run the IPX routing daemon.
392ipxrouted_flags=""		# Flags for IPX routing daemon.
393arpproxy_all="NO"		# replaces obsolete kernel option ARP_PROXYALL.
394forward_sourceroute="NO"	# do source routing (only if gateway_enable is set to "YES")
395accept_sourceroute="NO"		# accept source routed packets to us
396
397### ATM interface options: ###
398atm_enable="NO"			# Configure ATM interfaces (or NO).
399#atm_netif_hea0="atm 1"		# Network interfaces for physical interface.
400#atm_sigmgr_hea0="uni31"	# Signalling manager for physical interface.
401#atm_prefix_hea0="ILMI"		# NSAP prefix (UNI interfaces only) (or ILMI).
402#atm_macaddr_hea0="NO"		# Override physical MAC address (or NO).
403#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local).
404#atm_scsparp_atm0="NO"		# Run SCSP/ATMARP on network interface (or NO).
405atm_pvcs=""			# Set to PVC list (or leave empty).
406atm_arps=""			# Set to permanent ARP list (or leave empty).
407
408### Bluetooth ###
409hcsecd_enable="NO"		# Enable hcsecd(8) (or NO)
410hcsecd_config="/etc/bluetooth/hcsecd.conf" # hcsecd(8) configuration file
411
412sdpd_enable="NO"		# Enable sdpd(8) (or NO)
413sdpd_control="/var/run/sdp"	# sdpd(8) control socket
414sdpd_groupname="nobody"		# set spdp(8) user/group to run as after
415sdpd_username="nobody"		# it initializes
416
417bthidd_enable="NO"		# Enable bthidd(8) (or NO)
418bthidd_config="/etc/bluetooth/bthidd.conf" # bthidd(8) configuration file
419bthidd_hids="/var/db/bthidd.hids" # bthidd(8) known HID devices file
420
421rfcomm_pppd_server_enable="NO"	# Enable rfcomm_pppd(8) in server mode (or NO)
422rfcomm_pppd_server_profile="one two"	# Profile to use from /etc/ppp/ppp.conf
423#
424#rfcomm_pppd_server_one_bdaddr=""	# Override local bdaddr for 'one'
425rfcomm_pppd_server_one_channel="1"	# Override local channel for 'one'
426#rfcomm_pppd_server_one_register_sp="NO"	# Override SP and DUN register
427#rfcomm_pppd_server_one_register_dun="NO"	# for 'one'
428#
429#rfcomm_pppd_server_two_bdaddr=""	# Override local bdaddr for 'two'
430rfcomm_pppd_server_two_channel="3"	# Override local channel for 'two'
431#rfcomm_pppd_server_two_register_sp="NO"	# Override SP and DUN register
432#rfcomm_pppd_server_two_register_dun="NO"	# for 'two'
433
434ubthidhci_enable="NO"		# Switch an USB BT controller present on
435#ubthidhci_busnum="3"		# bus 3 and addr 2 from HID mode to HCI mode.
436#ubthidhci_addr="2"		# Check usbconfig list to find the correct
437				# numbers for your system.
438
439### Network link/usability verification options
440netwait_enable="NO"		# Enable rc.d/netwait (or NO)
441#netwait_ip=""			# IP addresses to be pinged by netwait.
442netwait_timeout="60"		# Total number of seconds to perform pings.
443#netwait_if=""			# Interface name to watch link state on.
444netwait_if_timeout="30"		# Total number of seconds to monitor link state.
445
446### Miscellaneous network options: ###
447icmp_bmcastecho="NO"	# respond to broadcast ping packets
448
449### IPv6 options: ###
450ipv6_network_interfaces="auto"	# List of IPv6 network interfaces
451				# (or "auto" or "none").
452ipv6_activate_all_interfaces="NO"	# If NO, interfaces which have no
453					# corresponding $ifconfig_IF_ipv6 is
454					# marked as IFDISABLED for security
455					# reason.
456ipv6_defaultrouter="NO"		# Set to IPv6 default gateway (or NO).
457#ipv6_defaultrouter="2002:c058:6301::"	# Use this for 6to4 (RFC 3068)
458ipv6_static_routes=""		# Set to static route list (or leave empty).
459#ipv6_static_routes="xxx"	# An example to set fec0:0000:0000:0006::/64
460				#  route toward loopback interface.
461#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1"
462ipv6_gateway_enable="NO"	# Set to YES if this host will be a gateway.
463ipv6_cpe_wanif="NO"		# Set to the upstram interface name if this
464				# node will work as a router to forward IPv6
465				# packets not explicitly addressed to itself.
466ipv6_privacy="NO"		# Use privacy address on RA-receiving IFs
467				# (RFC 4941)
468
469route6d_enable="NO"		# Set to YES to enable an IPv6 routing daemon.
470route6d_program="/usr/sbin/route6d"	# Name of IPv6 routing daemon.
471route6d_flags=""		# Flags to IPv6 routing daemon.
472#route6d_flags="-l"		# Example for route6d with only IPv6 site local
473				# addrs.
474#route6d_flags="-q"		# If you want to run a routing daemon on an end
475				# node, you should stop advertisement.
476#ipv6_network_interfaces="ed0 ep0"	# Examples for router
477					# or static configuration for end node.
478					# Choose correct prefix value.
479#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002"  # Examples for rtr.
480#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004"  # Examples for rtr.
481ipv6_default_interface="NO"	# Default output interface for scoped addrs.
482				# This works only with
483				# ipv6_gateway_enable="NO".
484rtsol_flags=""			# Flags to IPv6 router solicitation.
485rtsold_enable="NO"		# Set to YES to enable an IPv6 router
486				# solicitation daemon.
487rtsold_flags="-a"		# Flags to an IPv6 router solicitation
488				# daemon.
489rtadvd_enable="NO"		# Set to YES to enable an IPv6 router
490				# advertisement daemon. If set to YES,
491				# this router becomes a possible candidate
492				# IPv6 default router for local subnets.
493rtadvd_interfaces=""		# Interfaces rtadvd sends RA packets.
494mroute6d_enable="NO"		# Do IPv6 multicast routing.
495mroute6d_program="/usr/local/sbin/pim6dd"	# Name of IPv6 multicast
496						# routing daemon.  You need to
497						# install it from package or
498						# port.
499mroute6d_flags=""		# Flags to IPv6 multicast routing daemon.
500stf_interface_ipv4addr=""	# Local IPv4 addr for 6to4 IPv6 over IPv4
501				# tunneling interface. Specify this entry
502				# to enable 6to4 interface.
503stf_interface_ipv4plen="0"	# Prefix length for 6to4 IPv4 addr,
504				# to limit peer addr range. Effective value
505				# is 0-31.
506stf_interface_ipv6_ifid="0:0:0:1"	# IPv6 interface id for stf0.
507				# If you like, you can set "AUTO" for this.
508stf_interface_ipv6_slaid="0000"	# IPv6 Site Level Aggregator for stf0
509ipv6_faith_prefix="NO"		# Set faith prefix to enable a FAITH
510				# IPv6-to-IPv4 TCP translator.  You also need
511				# faithd(8) setup.
512ipv6_ipv4mapping="NO"		# Set to "YES" to enable IPv4 mapped IPv6 addr
513				# communication. (like ::ffff:a.b.c.d)
514ipv6_ipfilter_rules="/etc/ipf6.rules"	# rules definition file for ipfilter,
515					# see /usr/src/contrib/ipfilter/rules
516					# for examples
517ip6addrctl_enable="YES"	# Set to YES to enable default address selection
518ip6addrctl_verbose="NO"	# Set to YES to enable verbose configuration messages
519ip6addrctl_policy="AUTO"	# A pre-defined address selection policy
520				# (ipv4_prefer, ipv6_prefer, or AUTO)
521
522##############################################################
523###  System console options  #################################
524##############################################################
525
526keyboard=""		# keyboard device to use (default /dev/kbd0).
527keymap="NO"		# keymap in /usr/share/{syscons,vt}/keymaps/* (or NO).
528keyrate="NO"		# keyboard rate to: slow, normal, fast (or NO).
529keybell="NO" 		# See kbdcontrol(1) for options.  Use "off" to disable.
530keychange="NO"		# function keys default values (or NO).
531cursor="NO"		# cursor type {normal|blink|destructive} (or NO).
532scrnmap="NO"		# screen map in /usr/share/syscons/scrnmaps/* (or NO).
533font8x16="NO"		# font 8x16 from /usr/share/{syscons,vt}/fonts/* (or NO).
534font8x14="NO"		# font 8x14 from /usr/share/{syscons,vt}/fonts/* (or NO).
535font8x8="NO"		# font 8x8 from /usr/share/{syscons,vt}/fonts/* (or NO).
536blanktime="300"		# blank time (in seconds) or "NO" to turn it off.
537saver="NO"		# screen saver: Uses /boot/kernel/${saver}_saver.ko
538moused_nondefault_enable="YES" # Treat non-default mice as enabled unless
539			       # specifically overriden in rc.conf(5).
540moused_enable="NO"	# Run the mouse daemon.
541moused_type="auto"	# See man page for rc.conf(5) for available settings.
542moused_port="/dev/psm0"	# Set to your mouse port.
543moused_flags=""		# Any additional flags to moused.
544mousechar_start="NO"	# if 0xd0-0xd3 default range is occupied in your
545			# language code table, specify alternative range
546			# start like mousechar_start=3, see vidcontrol(1)
547allscreens_flags=""	# Set this vidcontrol mode for all virtual screens
548allscreens_kbdflags=""	# Set this kbdcontrol mode for all virtual screens
549
550##############################################################
551###  Mail Transfer Agent (MTA) options  ######################
552##############################################################
553
554mta_start_script="/etc/rc.sendmail"
555			# Script to start your chosen MTA, called by /etc/rc.
556# Settings for /etc/rc.sendmail and /etc/rc.d/sendmail:
557sendmail_enable="NO"	# Run the sendmail inbound daemon (YES/NO).
558sendmail_pidfile="/var/run/sendmail.pid"	# sendmail pid file
559sendmail_procname="/usr/sbin/sendmail"		# sendmail process name
560sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server)
561sendmail_cert_create="YES"	# Create a server certificate if none (YES/NO)
562#sendmail_cert_cn="CN"   	# CN of the generate certificate
563sendmail_submit_enable="YES"	# Start a localhost-only MTA for mail submission
564sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost"
565				# Flags for localhost-only MTA
566sendmail_outbound_enable="YES"	# Dequeue stuck mail (YES/NO).
567sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only)
568sendmail_msp_queue_enable="YES"	# Dequeue stuck clientmqueue mail (YES/NO).
569sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m"
570				# Flags for sendmail_msp_queue daemon.
571sendmail_rebuild_aliases="NO"	# Run newaliases if necessary (YES/NO).
572
573
574##############################################################
575###  Miscellaneous administrative options  ###################
576##############################################################
577
578auditd_enable="NO"	# Run the audit daemon.
579auditd_program="/usr/sbin/auditd"	# Path to the audit daemon.
580auditd_flags=""		# Which options to pass to the audit daemon.
581auditdistd_enable="NO"	# Run the audit daemon.
582auditdistd_program="/usr/sbin/auditdistd"	# Path to the auditdistd daemon.
583auditdistd_flags=""	# Which options to pass to the auditdistd daemon.
584cron_enable="YES"	# Run the periodic job daemon.
585cron_program="/usr/sbin/cron"	# Which cron executable to run (if enabled).
586cron_dst="YES"		# Handle DST transitions intelligently (YES/NO)
587cron_flags=""		# Which options to pass to the cron daemon.
588lpd_enable="NO"		# Run the line printer daemon.
589lpd_program="/usr/sbin/lpd"	# path to lpd, if you want a different one.
590lpd_flags=""		# Flags to lpd (if enabled).
591nscd_enable="NO"	# Run the nsswitch caching daemon.
592chkprintcap_enable="NO"	# Run chkprintcap(8) before running lpd.
593chkprintcap_flags="-d"	# Create missing directories by default.
594dumpdev="NO"		# Device to crashdump to (device name, AUTO, or NO).
595dumpdir="/var/crash"	# Directory where crash dumps are to be stored
596savecore_flags="-m 10"	# Used if dumpdev is enabled above, and present.
597			# By default, only the 10 most recent kernel dumps
598			# are saved.
599crashinfo_enable="YES"	# Automatically generate crash dump summary.
600crashinfo_program="/usr/sbin/crashinfo"	# Script to generate crash dump summary.
601quota_enable="NO"	# turn on quotas on startup (or NO).
602check_quotas="YES"	# Check quotas on startup (or NO).
603quotaon_flags="-a"	# Turn quotas on for all file systems (if enabled)
604quotaoff_flags="-a"	# Turn quotas off for all file systems at shutdown
605quotacheck_flags="-a"	# Check all file system quotas (if enabled)
606accounting_enable="NO"	# Turn on process accounting (or NO).
607ibcs2_enable="NO"	# Ibcs2 (SCO) emulation loaded at startup (or NO).
608ibcs2_loaders="coff"	# List of additional Ibcs2 loaders (or NO).
609firstboot_sentinel="/firstboot"	# Scripts with "firstboot" keyword are run if
610			# this file exists.  Should be on a R/W filesystem so
611			# the file can be deleted after the boot completes.
612
613# Emulation/compatibility services provided by /etc/rc.d/abi
614sysvipc_enable="NO"	# Load System V IPC primitives at startup (or NO).
615linux_enable="NO"	# Linux binary compatibility loaded at startup (or NO).
616svr4_enable="NO"	# SysVR4 emulation loaded at startup (or NO).
617clear_tmp_enable="NO"	# Clear /tmp at startup.
618clear_tmp_X="YES" 	# Clear and recreate X11-related directories in /tmp
619ldconfig_insecure="NO"	# Set to YES to disable ldconfig security checks
620ldconfig_paths="/usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg"
621			# shared library search paths
622ldconfig32_paths="/usr/lib32 /usr/lib32/compat"
623			# 32-bit compatibility shared library search paths
624ldconfig_paths_aout="/usr/lib/compat/aout /usr/local/lib/aout"
625			# a.out shared library search paths
626ldconfig_local_dirs="/usr/local/libdata/ldconfig"
627			# Local directories with ldconfig configuration files.
628ldconfig_local32_dirs="/usr/local/libdata/ldconfig32"
629			# Local directories with 32-bit compatibility ldconfig
630			# configuration files.
631kern_securelevel_enable="NO"	# kernel security level (see security(7))
632kern_securelevel="-1"	# range: -1..3 ; `-1' is the most insecure
633			# Note that setting securelevel to 0 will result
634			# in the system booting with securelevel set to 1, as
635			# init(8) will raise the level when rc(8) completes.
636update_motd="YES"	# update version info in /etc/motd (or NO)
637entropy_file="/entropy"	# Set to NO to disable caching entropy through reboots.
638			# /var/db/entropy-file is preferred if / is not avail.
639entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron.
640entropy_save_sz="2048"	# Size of the entropy cache files.
641entropy_save_num="8"	# Number of entropy cache files to save.
642harvest_interrupt="YES"	# Entropy device harvests interrupt randomness
643harvest_ethernet="YES"	# Entropy device harvests ethernet randomness
644harvest_p_to_p="YES"	# Entropy device harvests point-to-point randomness
645harvest_swi="YES"	# Entropy device harvests internal SWI randomness
646dmesg_enable="YES"	# Save dmesg(8) to /var/run/dmesg.boot
647watchdogd_enable="NO"	# Start the software watchdog daemon
648watchdogd_flags=""	# Flags to watchdogd (if enabled)
649devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing
650							    # devfs(8) rules.
651devfs_system_ruleset=""	# The name (NOT number) of a ruleset to apply to /dev
652devfs_set_rulesets=""	# A list of /mount/dev=ruleset_name settings to
653			# apply (must be mounted already, i.e. fstab(5))
654devfs_load_rulesets="YES"	# Enable to always load the default rulesets
655performance_cx_lowest="HIGH"	# Online CPU idle state
656performance_cpu_freq="NONE"	# Online CPU frequency
657economy_cx_lowest="HIGH"	# Offline CPU idle state
658economy_cpu_freq="NONE"		# Offline CPU frequency
659virecover_enable="YES"	# Perform housekeeping for the vi(1) editor
660ugidfw_enable="NO"	# Load mac_bsdextended(4) rules on boot
661bsdextended_script="/etc/rc.bsdextended"	# Default mac_bsdextended(4)
662						# ruleset file.
663newsyslog_enable="YES"	# Run newsyslog at startup.
664newsyslog_flags="-CN"	# Newsyslog flags to create marked files
665mixer_enable="YES"	# Run the sound mixer.
666opensm_enable="NO"	# Opensm(8) for infiniband devices defaults to off
667
668# rctl(8) requires kernel options RACCT and RCTL
669rctl_enable="NO"		# Load rctl(8) rules on boot
670rctl_rules="/etc/rctl.conf"	# rctl(8) ruleset. See rctl.conf(5).
671
672##############################################################
673### Jail Configuration (see rc.conf(5) manual page) ##########
674##############################################################
675jail_enable="NO"	# Set to NO to disable starting of any jails
676jail_parallel_start="NO"	# Start jails in the background
677jail_list=""		# Space separated list of names of jails
678
679##############################################################
680### Define source_rc_confs, the mechanism used by /etc/rc.* ##
681### scripts to source rc_conf_files overrides safely.	    ##
682##############################################################
683
684if [ -z "${source_rc_confs_defined}" ]; then
685	source_rc_confs_defined=yes
686	source_rc_confs() {
687		local i sourced_files
688		for i in ${rc_conf_files}; do
689			case ${sourced_files} in
690			*:$i:*)
691				;;
692			*)
693				sourced_files="${sourced_files}:$i:"
694				if [ -r $i ]; then
695					. $i
696				fi
697				;;
698			esac
699		done
700	}
701fi
702