t_mpls_fw6.sh revision 313498
1# $NetBSD: t_mpls_fw6.sh,v 1.3 2016/08/10 07:50:37 ozaki-r Exp $ 2# 3# Copyright (c) 2015 The NetBSD Foundation, Inc. 4# All rights reserved. 5# 6# Redistribution and use in source and binary forms, with or without 7# modification, are permitted provided that the following conditions 8# are met: 9# 1. Redistributions of source code must retain the above copyright 10# notice, this list of conditions and the following disclaimer. 11# 2. Redistributions in binary form must reproduce the above copyright 12# notice, this list of conditions and the following disclaimer in the 13# documentation and/or other materials provided with the distribution. 14# 15# THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 16# ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 17# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 18# PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 19# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 20# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 21# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 22# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 23# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 24# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 25# POSSIBILITY OF SUCH DAMAGE. 26# 27 28# Test MPLS encap/decap and forwarding using INET6 as encapsulated protocol 29# Setup four routers connected like this: R1---R2---R3---R4-- 30# Goal is to be able to ping from R1 the outermost interface of R4 31# Disable net.inet6.ip6.forwarding, enable net.mpls.forwarding 32# Add route on R1 in order to encapsulate into MPLS the IP6 packets with 33# destination equal to R4 right hand side interface 34# Add MPLS routes on R2 in order to forward frames belonging to that FEC to R3 35# Add MPLS "POP" route on R3 for that FEC, pointing to R4 36# Do the same for the reverse direction (R4 to R1) 37# ping6 from R1 to R4 right hand side interface 38# 39# redo the test using IPv6 explicit null label 40 41RUMP_SERVER1=unix://./r1 42RUMP_SERVER2=unix://./r2 43RUMP_SERVER3=unix://./r3 44RUMP_SERVER4=unix://./r4 45 46RUMP_FLAGS6="-lrumpnet -lrumpnet_net -lrumpnet_netinet -lrumpnet_netinet6 \ 47 -lrumpdev -lrumpnet_shmif -lrumpnet_netmpls" 48 49atf_test_case mplsfw6 cleanup 50mplsfw6_head() 51{ 52 53 atf_set "descr" "IP6/MPLS forwarding test using PHP" 54 atf_set "require.progs" "rump_server" 55} 56 57startservers() 58{ 59 60 ulimit -r 300 61 atf_check -s exit:0 rump_server ${RUMP_FLAGS6} ${RUMP_SERVER1} 62 atf_check -s exit:0 rump_server ${RUMP_FLAGS6} ${RUMP_SERVER2} 63 atf_check -s exit:0 rump_server ${RUMP_FLAGS6} ${RUMP_SERVER3} 64 atf_check -s exit:0 rump_server ${RUMP_FLAGS6} ${RUMP_SERVER4} 65} 66 67configservers() 68{ 69 70 # Setup the first server 71 export RUMP_SERVER=${RUMP_SERVER1} 72 atf_check -s exit:0 rump.ifconfig shmif0 create 73 atf_check -s exit:0 rump.ifconfig shmif0 linkstr ./shdom1 74 atf_check -s exit:0 rump.ifconfig shmif0 inet6 fd00:1234::1/64 alias 75 atf_check -s exit:0 rump.ifconfig mpls0 create up 76 atf_check -s exit:0 rump.sysctl -q -w net.mpls.accept=1 77 atf_check -s exit:0 rump.sysctl -q -w net.inet6.ip6.forwarding=0 78 atf_check -s exit:0 rump.route -q add -inet6 fd00:1234:0:3::/64 \ 79 -ifa fd00:1234::1 \ 80 -ifp mpls0 -tag 25 -inet6 fd00:1234::2 81 82 # Setup the second server 83 export RUMP_SERVER=${RUMP_SERVER2} 84 atf_check -s exit:0 rump.ifconfig shmif0 create 85 atf_check -s exit:0 rump.ifconfig shmif0 linkstr ./shdom1 86 atf_check -s exit:0 rump.ifconfig shmif0 inet6 fd00:1234::2/64 alias 87 atf_check -s exit:0 rump.ifconfig shmif1 create 88 atf_check -s exit:0 rump.ifconfig shmif1 linkstr ./shdom2 89 atf_check -s exit:0 rump.ifconfig shmif1 inet6 fd00:1234:0:1::1/64 alias 90 atf_check -s exit:0 rump.ifconfig mpls0 create up 91 atf_check -s exit:0 rump.sysctl -q -w net.mpls.accept=1 92 atf_check -s exit:0 rump.sysctl -q -w net.mpls.forwarding=1 93 atf_check -s exit:0 rump.sysctl -q -w net.inet6.ip6.forwarding=0 94 atf_check -s exit:0 rump.route -q add -mpls 25 -tag 30 \ 95 -inet6 fd00:1234:0:1::2 96 atf_check -s exit:0 rump.route -q add -mpls 27 -tag ${1} -inet6 \ 97 fd00:1234::1 98 99 # Setup the third server 100 export RUMP_SERVER=${RUMP_SERVER3} 101 atf_check -s exit:0 rump.ifconfig shmif0 create 102 atf_check -s exit:0 rump.ifconfig shmif0 linkstr ./shdom2 103 atf_check -s exit:0 rump.ifconfig shmif0 inet6 fd00:1234:0:1::2/64 alias 104 atf_check -s exit:0 rump.ifconfig shmif1 create 105 atf_check -s exit:0 rump.ifconfig shmif1 linkstr ./shdom3 106 atf_check -s exit:0 rump.ifconfig shmif1 inet6 fd00:1234:0:2::1/64 alias 107 atf_check -s exit:0 rump.ifconfig mpls0 create up 108 atf_check -s exit:0 rump.sysctl -q -w net.mpls.accept=1 109 atf_check -s exit:0 rump.sysctl -q -w net.mpls.forwarding=1 110 atf_check -s exit:0 rump.sysctl -q -w net.inet6.ip6.forwarding=0 111 atf_check -s exit:0 rump.route -q add -mpls 30 -tag ${1} \ 112 -inet6 fd00:1234:0:2::2 113 atf_check -s exit:0 rump.route -q add -mpls 26 -tag 27 \ 114 -inet6 fd00:1234:0:1::1 115 116 # Setup the fourth server 117 export RUMP_SERVER=${RUMP_SERVER4} 118 atf_check -s exit:0 rump.ifconfig shmif0 create 119 atf_check -s exit:0 rump.ifconfig shmif0 linkstr ./shdom3 120 atf_check -s exit:0 rump.ifconfig shmif0 inet6 fd00:1234:0:2::2/64 alias 121 atf_check -s exit:0 rump.ifconfig shmif1 create 122 atf_check -s exit:0 rump.ifconfig shmif1 linkstr ./shdom4 123 atf_check -s exit:0 rump.ifconfig shmif1 inet6 fd00:1234:0:3::1/64 alias 124 atf_check -s exit:0 rump.ifconfig mpls0 create up 125 atf_check -s exit:0 rump.sysctl -q -w net.mpls.accept=1 126 atf_check -s exit:0 rump.sysctl -q -w net.inet6.ip6.forwarding=0 127 atf_check -s exit:0 rump.route -q add -inet6 fd00:1234::/64 \ 128 -ifa fd00:1234:0:2::2 \ 129 -ifp mpls0 -tag 26 -inet6 fd00:1234:0:2::1 130 131 unset RUMP_SERVER 132} 133 134doping() 135{ 136 137 export RUMP_SERVER=${RUMP_SERVER1} 138 atf_check -s exit:0 \ 139 -o match:" bytes from fd00:1234::2, icmp_seq=" \ 140 rump.ping6 -n -o -X 2 fd00:1234::2 141 export RUMP_SERVER=${RUMP_SERVER2} 142 atf_check -s exit:0 \ 143 -o match:" bytes from fd00:1234:0:1::2, icmp_seq=" \ 144 rump.ping6 -n -o -X 2 fd00:1234:0:1::2 145 export RUMP_SERVER=${RUMP_SERVER3} 146 atf_check -s exit:0 \ 147 -o match:" bytes from fd00:1234:0:2::2, icmp_seq=" \ 148 rump.ping6 -n -o -X 2 fd00:1234:0:2::2 149 export RUMP_SERVER=${RUMP_SERVER1} 150 atf_check -s exit:0 \ 151 -o match:" bytes from fd00:1234:0:3::1, icmp_seq=" \ 152 rump.ping6 -n -o -X 2 fd00:1234:0:3::1 153 unset RUMP_SERVER 154} 155 156do_check_route() 157{ 158 159 export RUMP_SERVER=${RUMP_SERVER1} 160 atf_check -s exit:0 \ 161 -o match:"^fd00:1234:0:3::/64.+fd00:1234::2.+25.+mpls0" \ 162 rump.netstat -nrT 163 unset RUMP_SERVER 164} 165 166docleanup() 167{ 168 169 RUMP_SERVER=${RUMP_SERVER1} rump.halt 170 RUMP_SERVER=${RUMP_SERVER2} rump.halt 171 RUMP_SERVER=${RUMP_SERVER3} rump.halt 172 RUMP_SERVER=${RUMP_SERVER4} rump.halt 173} 174 175mplsfw6_body() 176{ 177 178 startservers 179 configservers 3 180 do_check_route 181 doping 182} 183 184mplsfw6_cleanup() 185{ 186 187 docleanup 188} 189 190 191atf_test_case mplsfw6_expl cleanup 192mplsfw4_expl_head() 193{ 194 195 atf_set "descr" "IP6/MPLS forwarding test using explicit NULL labels" 196 atf_set "require.progs" "rump_server" 197} 198 199mplsfw6_expl_body() 200{ 201 202 startservers 203 configservers 2 204 do_check_route 205 doping 206} 207 208mplsfw6_expl_cleanup() 209{ 210 211 docleanup 212} 213 214 215atf_init_test_cases() 216{ 217 218 atf_add_test_case mplsfw6 219 atf_add_test_case mplsfw6_expl 220} 221