ls_tests.sh revision 301627
1# 2# Copyright 2015 EMC Corp. 3# All rights reserved. 4# 5# Redistribution and use in source and binary forms, with or without 6# modification, are permitted provided that the following conditions are 7# met: 8# 9# * Redistributions of source code must retain the above copyright 10# notice, this list of conditions and the following disclaimer. 11# * Redistributions in binary form must reproduce the above copyright 12# notice, this list of conditions and the following disclaimer in the 13# documentation and/or other materials provided with the distribution. 14# 15# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 16# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 17# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 18# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 19# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 20# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 21# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 22# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 23# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 24# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 25# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 26# 27# $FreeBSD: stable/10/bin/ls/tests/ls_tests.sh 301627 2016-06-08 14:07:43Z ngie $ 28# 29 30create_test_dir() 31{ 32 [ -z "$ATF_TMPDIR" ] || return 0 33 34 export ATF_TMPDIR=$(pwd) 35 36 # XXX: need to nest this because of how kyua creates $TMPDIR; otherwise 37 # it will run into EPERM issues later 38 TEST_INPUTS_DIR="${ATF_TMPDIR}/test/inputs" 39 40 atf_check -e empty -s exit:0 mkdir -m 0777 -p $TEST_INPUTS_DIR 41 cd $TEST_INPUTS_DIR 42} 43 44create_test_inputs() 45{ 46 create_test_dir 47 48 atf_check -e empty -s exit:0 mkdir -m 0755 -p a/b/1 49 atf_check -e empty -s exit:0 ln -s a/b c 50 atf_check -e empty -s exit:0 touch d 51 atf_check -e empty -s exit:0 ln d e 52 atf_check -e empty -s exit:0 touch .f 53 atf_check -e empty -s exit:0 mkdir .g 54 atf_check -e empty -s exit:0 mkfifo h 55 atf_check -e ignore -s exit:0 dd if=/dev/zero of=i count=1000 bs=1 56 atf_check -e empty -s exit:0 touch klmn 57 atf_check -e empty -s exit:0 touch opqr 58 atf_check -e empty -s exit:0 touch stuv 59 atf_check -e empty -s exit:0 install -m 0755 /dev/null wxyz 60 atf_check -e empty -s exit:0 touch 0b00000001 61 atf_check -e empty -s exit:0 touch 0b00000010 62 atf_check -e empty -s exit:0 touch 0b00000011 63 atf_check -e empty -s exit:0 touch 0b00000100 64 atf_check -e empty -s exit:0 touch 0b00000101 65 atf_check -e empty -s exit:0 touch 0b00000110 66 atf_check -e empty -s exit:0 touch 0b00000111 67 atf_check -e empty -s exit:0 touch 0b00001000 68 atf_check -e empty -s exit:0 touch 0b00001001 69 atf_check -e empty -s exit:0 touch 0b00001010 70 atf_check -e empty -s exit:0 touch 0b00001011 71 atf_check -e empty -s exit:0 touch 0b00001100 72 atf_check -e empty -s exit:0 touch 0b00001101 73 atf_check -e empty -s exit:0 touch 0b00001110 74 atf_check -e empty -s exit:0 touch 0b00001111 75} 76 77KB=1024 78MB=$(( 1024 * $KB )) 79GB=$(( 1024 * $MB )) 80TB=$(( 1024 * $GB )) 81PB=$(( 1024 * $TB )) 82 83create_test_inputs2() 84{ 85 create_test_dir 86 87 for filesize in 1 512 $(( 2 * $KB )) $(( 10 * $KB )) $(( 512 * $KB )); \ 88 do 89 atf_check -e ignore -o empty -s exit:0 \ 90 dd if=/dev/zero of=${filesize}.file bs=1 \ 91 count=1 oseek=${filesize} conv=sparse 92 files="${files} ${filesize}.file" 93 done 94 95 for filesize in $MB $GB $TB; do 96 atf_check -e ignore -o empty -s exit:0 \ 97 dd if=/dev/zero of=${filesize}.file bs=$MB \ 98 count=1 oseek=$(( $filesize / $MB )) conv=sparse 99 files="${files} ${filesize}.file" 100 done 101} 102 103atf_test_case A_flag 104A_flag_head() 105{ 106 atf_set "descr" "Verify -A support with unprivileged users" 107} 108 109A_flag_body() 110{ 111 create_test_dir 112 113 atf_check -e empty -o empty -s exit:0 ls -A 114 115 create_test_inputs 116 117 WITH_A=$PWD/../with_A.out 118 WITHOUT_A=$PWD/../without_A.out 119 120 atf_check -e empty -o save:$WITH_A -s exit:0 ls -A 121 atf_check -e empty -o save:$WITHOUT_A -s exit:0 ls 122 123 echo "-A usage" 124 cat $WITH_A 125 echo "No -A usage" 126 cat $WITHOUT_A 127 128 for dot_path in '\.f' '\.g'; do 129 atf_check -e empty -o not-empty -s exit:0 grep "${dot_path}" \ 130 $WITH_A 131 atf_check -e empty -o empty -s not-exit:0 grep "${dot_path}" \ 132 $WITHOUT_A 133 done 134} 135 136atf_test_case A_flag_implied_when_root 137A_flag_implied_when_root_head() 138{ 139 atf_set "descr" "Verify that -A is implied for root" 140 atf_set "require.user" "root" 141} 142 143A_flag_implied_when_root_body() 144{ 145 create_test_dir 146 147 atf_check -e empty -o empty -s exit:0 ls -A 148 149 create_test_inputs 150 151 WITH_EXPLICIT=$PWD/../with_explicit_A.out 152 WITH_IMPLIED=$PWD/../with_implied_A.out 153 154 atf_check -e empty -o save:$WITH_EXPLICIT -s exit:0 ls -A 155 atf_check -e empty -o save:$WITH_IMPLIED -s exit:0 ls 156 157 echo "Explicit -A usage" 158 cat $WITH_EXPLICIT 159 echo "Implicit -A usage" 160 cat $WITH_IMPLIED 161 162 atf_check_equal "$(cat $WITH_EXPLICIT)" "$(cat $WITH_IMPLIED)" 163} 164 165atf_test_case B_flag 166B_flag_head() 167{ 168 atf_set "descr" "Verify that the output from ls -B prints out non-printable characters" 169} 170 171B_flag_body() 172{ 173 atf_check -e empty -o empty -s exit:0 touch "$(printf "y\013z")" 174 atf_check -e empty -o match:'y\\013z' -s exit:0 ls -B 175} 176 177atf_test_case C_flag 178C_flag_head() 179{ 180 atf_set "descr" "Verify that the output from ls -C is multi-column, sorted down" 181} 182 183print_index() 184{ 185 local i=1 186 local wanted_index=$1; shift 187 188 while [ $i -le $wanted_index ]; do 189 if [ $i -eq $wanted_index ]; then 190 echo $1 191 return 192 fi 193 shift 194 : $(( i += 1 )) 195 done 196} 197 198C_flag_body() 199{ 200 create_test_inputs 201 202 WITH_C=$PWD/../with_C.out 203 204 export COLUMNS=40 205 atf_check -e empty -o save:$WITH_C -s exit:0 ls -C 206 207 echo "With -C usage" 208 cat $WITH_C 209 210 paths=$(find -s . -mindepth 1 -maxdepth 1 \! -name '.*' -exec basename {} \; ) 211 set -- $paths 212 num_paths=$# 213 num_columns=2 214 215 max_num_paths_per_column=$(( $(( $num_paths + 1 )) / $num_columns )) 216 217 local i=1 218 while [ $i -le $max_num_paths_per_column ]; do 219 column_1=$(print_index $i $paths) 220 column_2=$(print_index $(( $i + $max_num_paths_per_column )) $paths) 221 #echo "paths[$(( $i + $max_num_paths_per_column ))] = $column_2" 222 expected_expr="$column_1" 223 if [ -n "$column_2" ]; then 224 expected_expr="$expected_expr[[:space:]]+$column_2" 225 fi 226 atf_check -e ignore -o not-empty -s exit:0 \ 227 egrep "$expected_expr" $WITH_C 228 : $(( i += 1 )) 229 done 230} 231 232atf_test_case D_flag 233D_flag_head() 234{ 235 atf_set "descr" "Verify that the output from ls -D modifies the time format used with ls -l" 236} 237 238D_flag_body() 239{ 240 atf_check -e empty -o empty -s exit:0 touch a.file 241 atf_check -e empty -o match:"$(stat -f '%c[[:space:]]+%N' a.file)" \ 242 -s exit:0 ls -lD '%s' 243} 244 245atf_test_case F_flag 246F_flag_head() 247{ 248 atf_set "descr" "Verify that the output from ls -F prints out appropriate symbols after files" 249} 250 251F_flag_body() 252{ 253 create_test_inputs 254 255 atf_check -e empty -s exit:0 \ 256 sh -c "pid=${ATF_TMPDIR}/nc.pid; daemon -p \$pid nc -lU j; sleep 2; pkill -F \$pid" 257 258 atf_check -e empty -o match:'a/' -s exit:0 ls -F 259 atf_check -e empty -o match:'c@' -s exit:0 ls -F 260 atf_check -e empty -o match:'h\|' -s exit:0 ls -F 261 atf_check -e empty -o match:'j=' -s exit:0 ls -F 262 #atf_check -e empty -o match:'<whiteout-file>%' -s exit:0 ls -F 263 atf_check -e empty -o match:'stuv' -s exit:0 ls -F 264 atf_check -e empty -o match:'wxyz\*' -s exit:0 ls -F 265} 266 267atf_test_case H_flag 268H_flag_head() 269{ 270 atf_set "descr" "Verify that ls -H follows symlinks" 271} 272 273H_flag_body() 274{ 275 create_test_inputs 276 277 atf_check -e empty -o match:'1' -s exit:0 ls -H c 278} 279 280atf_test_case I_flag 281I_flag_head() 282{ 283 atf_set "descr" "Verify that the output from ls -I is the same as ls for an unprivileged user" 284} 285 286I_flag_body() 287{ 288 create_test_inputs 289 290 WITH_I=$PWD/../with_I.out 291 WITHOUT_I=$PWD/../without_I.out 292 293 atf_check -e empty -o save:$WITH_I -s exit:0 ls -I 294 atf_check -e empty -o save:$WITHOUT_I -s exit:0 ls 295 296 echo "Explicit -I usage" 297 cat $WITH_I 298 echo "No -I usage" 299 cat $WITHOUT_I 300 301 atf_check_equal "$(cat $WITH_I)" "$(cat $WITHOUT_I)" 302} 303 304atf_test_case I_flag_voids_implied_A_flag_when_root 305I_flag_voids_implied_A_flag_when_root_head() 306{ 307 atf_set "descr" "Verify that -I voids out implied -A for root" 308 atf_set "require.user" "root" 309} 310 311I_flag_voids_implied_A_flag_when_root_body() 312{ 313 create_test_inputs 314 315 atf_check -o not-match:'\.f' -s exit:0 ls -I 316 atf_check -o not-match:'\.g' -s exit:0 ls -I 317 318 atf_check -o match:'\.f' -s exit:0 ls -A -I 319 atf_check -o match:'\.g' -s exit:0 ls -A -I 320} 321 322atf_test_case L_flag 323L_flag_head() 324{ 325 atf_set "descr" "Verify that -L prints out the symbolic link and conversely -P prints out the target for the symbolic link" 326} 327 328L_flag_body() 329{ 330 atf_check -e empty -o empty -s exit:0 ln -s target1/target2 link1 331 atf_check -e empty -o match:link1 -s exit:0 ls -L 332 atf_check -e empty -o not-match:target1/target2 -s exit:0 ls -L 333} 334 335atf_test_case R_flag 336R_flag_head() 337{ 338 atf_set "descr" "Verify that the output from ls -R prints out the directory contents recursively" 339} 340 341R_flag_body() 342{ 343 create_test_inputs 344 345 WITH_R=$PWD/../with_R.out 346 WITH_R_expected_output=$PWD/../with_R_expected.out 347 348 atf_check -e empty -o save:$WITH_R -s exit:0 ls -R 349 350 set -- . $(find -s . \! -name '.*' -type d) 351 while [ $# -gt 0 ]; do 352 dir=$1; shift 353 [ "$dir" != "." ] && echo "$dir:" 354 (cd $dir && ls -1A | sed -e '/^\./d') 355 [ $# -ne 0 ] && echo 356 done > $WITH_R_expected_output 357 358 echo "-R usage" 359 cat $WITH_R 360 echo "-R expected output" 361 cat $WITH_R_expected_output 362 363 atf_check_equal "$(cat $WITH_R)" "$(cat $WITH_R_expected_output)" 364} 365 366atf_test_case S_flag 367S_flag_head() 368{ 369 atf_set "descr" "Verify that -S sorts by file size, then by filename lexicographically" 370} 371 372S_flag_body() 373{ 374 create_test_dir 375 376 file_list_dir=$PWD/../files 377 378 atf_check -e empty -o empty -s exit:0 mkdir -p $file_list_dir 379 380 create_test_inputs 381 create_test_inputs2 382 383 WITH_S=$PWD/../with_S.out 384 WITHOUT_S=$PWD/../without_S.out 385 386 atf_check -e empty -o save:$WITH_S ls -D '%s' -lS 387 atf_check -e empty -o save:$WITHOUT_S ls -D '%s' -l 388 389 WITH_S_parsed=$(awk '! /^total/ { print $7 }' $WITH_S) 390 set -- $(awk '! /^total/ { print $5, $7 }' $WITHOUT_S) 391 while [ $# -gt 0 ]; do 392 size=$1; shift 393 filename=$1; shift 394 echo $filename >> $file_list_dir/${size} 395 done 396 file_lists=$(find $file_list_dir -type f -exec basename {} \; | sort -nr) 397 WITHOUT_S_parsed=$(for file_list in $file_lists; do sort < $file_list_dir/$file_list; done) 398 399 echo "-lS usage (parsed)" 400 echo "$WITH_S_parsed" 401 echo "-l usage (parsed)" 402 echo "$WITHOUT_S_parsed" 403 404 atf_check_equal "$WITHOUT_S_parsed" "$WITH_S_parsed" 405} 406 407atf_test_case T_flag 408T_flag_head() 409{ 410 atf_set "descr" "Verify -T support" 411} 412 413T_flag_body() 414{ 415 create_test_dir 416 417 atf_check -e empty -o empty -s exit:0 touch a.file 418 419 birthtime_in_secs=$(stat -f %B -t %s a.file) 420 birthtime=$(date -j -f %s $birthtime_in_secs +"[[:space:]]+%b[[:space:]]+%e[[:space:]]+%H:%M:%S[[:space:]]+%Y") 421 422 atf_check -e empty -o match:"$birthtime"'[[:space:]]+a\.file' \ 423 -s exit:0 ls -lT a.file 424} 425 426atf_test_case a_flag 427a_flag_head() 428{ 429 atf_set "descr" "Verify -a support" 430} 431 432a_flag_body() 433{ 434 create_test_dir 435 436 # Make sure "." and ".." show up with -a 437 atf_check -e empty -o match:'\.[[:space:]]+\.\.' -s exit:0 ls -ax 438 439 create_test_inputs 440 441 WITH_a=$PWD/../with_a.out 442 WITHOUT_a=$PWD/../without_a.out 443 444 atf_check -e empty -o save:$WITH_a -s exit:0 ls -a 445 atf_check -e empty -o save:$WITHOUT_a -s exit:0 ls 446 447 echo "-a usage" 448 cat $WITH_a 449 echo "No -a usage" 450 cat $WITHOUT_a 451 452 for dot_path in '\.f' '\.g'; do 453 atf_check -e empty -o not-empty -s exit:0 grep "${dot_path}" \ 454 $WITH_a 455 atf_check -e empty -o empty -s not-exit:0 grep "${dot_path}" \ 456 $WITHOUT_a 457 done 458} 459 460atf_test_case b_flag 461b_flag_head() 462{ 463 atf_set "descr" "Verify that the output from ls -b prints out non-printable characters" 464} 465 466b_flag_body() 467{ 468 atf_check -e empty -o empty -s exit:0 touch "$(printf "y\013z")" 469 atf_check -e empty -o match:'y\\vz' -s exit:0 ls -b 470} 471 472atf_test_case d_flag 473d_flag_head() 474{ 475 atf_set "descr" "Verify that -d doesn't descend down directories" 476} 477 478d_flag_body() 479{ 480 create_test_dir 481 482 output=$PWD/../output 483 484 atf_check -e empty -o empty -s exit:0 mkdir -p a/b 485 486 for path in . $PWD a; do 487 atf_check -e empty -o save:$output -s exit:0 ls -d $path 488 atf_check_equal "$(cat $output)" "$path" 489 done 490} 491 492atf_test_case f_flag 493f_flag_head() 494{ 495 atf_set "descr" "Verify that -f prints out the contents of a directory unsorted" 496} 497 498f_flag_body() 499{ 500 create_test_inputs 501 502 output=$PWD/../output 503 504 # XXX: I don't have enough understanding of how the algorithm works yet 505 # to determine more than the fact that all the entries printed out 506 # exist 507 paths=$(find -s . -mindepth 1 -maxdepth 1 \! -name '.*' -exec basename {} \; ) 508 509 atf_check -e empty -o save:$output -s exit:0 ls -f 510 511 for path in $paths; do 512 atf_check -e ignore -o not-empty -s exit:0 \ 513 egrep "^$path$" $output 514 done 515} 516 517atf_test_case g_flag 518g_flag_head() 519{ 520 atf_set "descr" "Verify that -g does nothing (compatibility flag)" 521} 522 523g_flag_body() 524{ 525 create_test_inputs2 526 for file in $files; do 527 atf_check -e empty -o match:"$(ls -a $file)" -s exit:0 \ 528 ls -ag $file 529 atf_check -e empty -o match:"$(ls -la $file)" -s exit:0 \ 530 ls -alg $file 531 done 532} 533 534atf_test_case h_flag 535h_flag_head() 536{ 537 atf_set "descr" "Verify that -h prints out the humanized units for file sizes with ls -l" 538 atf_set "require.progs" "bc" 539} 540 541h_flag_body() 542{ 543 # XXX: this test doesn't currently show how 999 bytes will be 999B, 544 # but 1000 bytes will be 1.0K, due to how humanize_number(3) works. 545 create_test_inputs2 546 for file in $files; do 547 file_size=$(stat -f '%z' "$file") || \ 548 atf_fail "stat'ing $file failed" 549 scale=2 550 if [ $file_size -lt $KB ]; then 551 divisor=1 552 scale=0 553 suffix=B 554 elif [ $file_size -lt $MB ]; then 555 divisor=$KB 556 suffix=K 557 elif [ $file_size -lt $GB ]; then 558 divisor=$MB 559 suffix=M 560 elif [ $file_size -lt $TB ]; then 561 divisor=$GB 562 suffix=G 563 elif [ $file_size -lt $PB ]; then 564 divisor=$TB 565 suffix=T 566 else 567 divisor=$PB 568 suffix=P 569 fi 570 571 bc_expr="$(printf "scale=%s\n%s/%s\nquit" $scale $file_size $divisor)" 572 size_humanized=$(bc -e "$bc_expr" | tr '.' '\.' | sed -e 's,\.00,,') 573 574 atf_check -e empty -o match:"$size_humanized.+$file" \ 575 -s exit:0 ls -hl $file 576 done 577} 578 579atf_test_case i_flag 580i_flag_head() 581{ 582 atf_set "descr" "Verify that -i prints out the inode for files" 583} 584 585i_flag_body() 586{ 587 create_test_inputs 588 589 paths=$(find -L . -mindepth 1) 590 [ -n "$paths" ] || atf_skip 'Could not find any paths to iterate over (!)' 591 592 for path in $paths; do 593 atf_check -e empty \ 594 -o match:"$(stat -f '[[:space:]]*%i[[:space:]]+%N' $path)" \ 595 -s exit:0 ls -d1i $path 596 done 597} 598 599atf_test_case k_flag 600k_flag_head() 601{ 602 atf_set "descr" "Verify that -k prints out the size with a block size of 1kB" 603} 604 605k_flag_body() 606{ 607 create_test_inputs2 608 for file in $files; do 609 atf_check -e empty \ 610 -o match:"[[:space:]]+$(stat -f "%z" $file)[[:space:]]+.+[[:space:]]+$file" ls -lk $file 611 done 612} 613 614atf_test_case l_flag 615l_flag_head() 616{ 617 atf_set "descr" "Verify that -l prints out the output in long format" 618} 619 620l_flag_body() 621{ 622 623 atf_check -e empty -o empty -s exit:0 touch a.file 624 625 birthtime_in_secs=$(stat -f "%B" -t "%s" a.file) 626 birthtime=$(date -j -f "%s" $birthtime_in_secs +"%b[[:space:]]+%e[[:space:]]+%H:%M") 627 628 expected_output=$(stat -f "%Sp[[:space:]]+%l[[:space:]]+%Su[[:space:]]+%Sg[[:space:]]+%z[[:space:]]+$birthtime[[:space:]]+a\\.file" a.file) 629 630 atf_check -e empty -o match:"$expected_output" -s exit:0 ls -l a.file 631} 632 633atf_test_case lcomma_flag 634lcomma_flag_head() 635{ 636 atf_set "descr" "Verify that -l, prints out the size with ',' delimiters" 637} 638 639lcomma_flag_body() 640{ 641 create_test_inputs 642 643 atf_check \ 644 -o match:'\-rw\-r\-\-r\-\-[[:space:]]+.+[[:space:]]+1,000[[:space:]]+.+i' \ 645 env LC_ALL=en_US.ISO8859-1 ls -l, i 646} 647 648atf_test_case m_flag 649m_flag_head() 650{ 651 atf_set "descr" "Verify that the output from ls -m is comma-separated" 652} 653 654m_flag_body() 655{ 656 create_test_dir 657 658 output=$PWD/../output 659 660 atf_check -e empty -o empty -s exit:0 touch ,, "a,b " c d e 661 662 atf_check -e empty -o save:$output -s exit:0 ls -m 663 664 atf_check_equal "$(cat $output)" ",,, a,b , c, d, e" 665} 666 667atf_test_case n_flag 668n_flag_head() 669{ 670 atf_set "descr" "Verify that the output from ls -n prints out numeric GIDs/UIDs instead of symbolic GIDs/UIDs" 671 atf_set "require.user" "root" 672} 673 674n_flag_body() 675{ 676 daemon_gid=$(id -g daemon) || atf_skip "could not resolve gid for daemon (!)" 677 nobody_uid=$(id -u nobody) || atf_skip "could not resolve uid for nobody (!)" 678 679 atf_check -e empty -o empty -s exit:0 touch a.file 680 atf_check -e empty -o empty -s exit:0 chown $nobody_uid:$daemon_gid a.file 681 682 atf_check -e empty \ 683 -o match:'\-rw\-r\-\-r\-\-[[:space:]]+1[[:space:]]+'"$nobody_uid[[:space:]]+$daemon_gid"'[[:space:]]+.+a\.file' \ 684 ls -ln a.file 685 686} 687 688atf_test_case o_flag 689o_flag_head() 690{ 691 atf_set "descr" "Verify that the output from ls -o prints out the chflag values or '-' if none are set" 692 atf_set "require.user" "root" 693} 694 695o_flag_body() 696{ 697 local size=12345 698 699 create_test_dir 700 701 atf_check -e ignore -o empty -s exit:0 dd if=/dev/zero of=a.file \ 702 bs=$size count=1 703 atf_check -e ignore -o empty -s exit:0 dd if=/dev/zero of=b.file \ 704 bs=$size count=1 705 atf_check -e empty -o empty -s exit:0 chflags uarch a.file 706 707 atf_check -e empty -o match:"[[:space:]]+uarch[[:space:]]$size+.+a\\.file" \ 708 -s exit:0 ls -lo a.file 709 atf_check -e empty -o match:"[[:space:]]+\\-[[:space:]]$size+.+b\\.file" \ 710 -s exit:0 ls -lo b.file 711} 712 713atf_test_case p_flag 714p_flag_head() 715{ 716 atf_set "descr" "Verify that the output from ls -p prints out '/' after directories" 717} 718 719p_flag_body() 720{ 721 create_test_inputs 722 723 paths=$(find -L .) 724 [ -n "$paths" ] || atf_skip 'Could not find any paths to iterate over (!)' 725 726 for path in $paths; do 727 suffix= 728 # If path is not a symlink and is a directory, then the suffix 729 # must be "/". 730 if [ ! -L "${path}" -a -d "$path" ]; then 731 suffix=/ 732 fi 733 atf_check -e empty -o match:"$path${suffix}" -s exit:0 \ 734 ls -dp $path 735 done 736} 737 738atf_test_case q_flag_and_w_flag 739q_flag_and_w_flag_head() 740{ 741 atf_set "descr" "Verify that the output from ls -q prints out '?' for ESC and ls -w prints out the escape character" 742} 743 744q_flag_and_w_flag_body() 745{ 746 create_test_dir 747 748 test_file="$(printf "y\01z")" 749 750 atf_check -e empty -o empty -s exit:0 touch "$test_file" 751 752 atf_check -e empty -o match:'y\?z' -s exit:0 ls -q "$test_file" 753 atf_check -e empty -o match:"$test_file" -s exit:0 ls -w "$test_file" 754} 755 756atf_test_case r_flag 757r_flag_head() 758{ 759 atf_set "descr" "Verify that the output from ls -r sorts the same way as reverse sorting with sort(1)" 760} 761 762r_flag_body() 763{ 764 create_test_inputs 765 766 WITH_r=$PWD/../with_r.out 767 WITH_sort=$PWD/../with_sort.out 768 769 atf_check -e empty -o save:$WITH_r -s exit:0 ls -1r 770 atf_check -e empty -o save:$WITH_sort -s exit:0 sh -c 'ls -1 | sort -r' 771 772 echo "Sorted with -r" 773 cat $WITH_r 774 echo "Reverse sorted with sort(1)" 775 cat $WITH_sort 776 777 atf_check_equal "$(cat $WITH_r)" "$(cat $WITH_sort)" 778} 779 780atf_test_case s_flag 781s_flag_head() 782{ 783 atf_set "descr" "Verify that the output from ls -s matches the output from stat(1)" 784} 785 786s_flag_body() 787{ 788 create_test_inputs2 789 for file in $files; do 790 atf_check -e empty \ 791 -o match:"$(stat -f "%b" $file)[[:space:]]+$file" ls -s $file 792 done 793} 794 795atf_test_case t_flag 796t_flag_head() 797{ 798 atf_set "descr" "Verify that the output from ls -t sorts by modification time" 799} 800 801t_flag_body() 802{ 803 create_test_dir 804 805 atf_check -e empty -o empty -s exit:0 touch a.file 806 atf_check -e empty -o empty -s exit:0 touch b.file 807 808 atf_check -e empty -o match:'a\.file' -s exit:0 sh -c 'ls -lt | tail -n 1' 809 atf_check -e empty -o match:'b\.file.*a\.file' -s exit:0 ls -Ct 810 811 atf_check -e empty -o empty -s exit:0 rm a.file 812 atf_check -e empty -o empty -s exit:0 sh -c 'echo "i am a" > a.file' 813 814 atf_check -e empty -o match:'b\.file' -s exit:0 sh -c 'ls -lt | tail -n 1' 815 atf_check -e empty -o match:'a\.file.*b\.file' -s exit:0 ls -Ct 816} 817 818atf_test_case u_flag 819u_flag_head() 820{ 821 atf_set "descr" "Verify that the output from ls -u sorts by last access" 822} 823 824u_flag_body() 825{ 826 create_test_dir 827 828 atf_check -e empty -o empty -s exit:0 touch a.file 829 atf_check -e empty -o empty -s exit:0 touch b.file 830 831 atf_check -e empty -o match:'b\.file' -s exit:0 sh -c 'ls -lu | tail -n 1' 832 atf_check -e empty -o match:'a\.file.*b\.file' -s exit:0 ls -Cu 833 834 atf_check -e empty -o empty -s exit:0 sh -c 'echo "i am a" > a.file' 835 atf_check -e empty -o match:'i am a' -s exit:0 cat a.file 836 837 atf_check -e empty -o match:'b\.file' -s exit:0 sh -c 'ls -lu | tail -n 1' 838 atf_check -e empty -o match:'a\.file.*b\.file' -s exit:0 ls -Cu 839} 840 841atf_test_case x_flag 842x_flag_head() 843{ 844 atf_set "descr" "Verify that the output from ls -x is multi-column, sorted across" 845} 846 847x_flag_body() 848{ 849 create_test_inputs 850 851 WITH_x=$PWD/../with_x.out 852 853 atf_check -e empty -o save:$WITH_x -s exit:0 ls -x 854 855 echo "With -x usage" 856 cat $WITH_x 857 858 atf_check -e ignore -o not-empty -s exit:0 \ 859 egrep "a[[:space:]]+c[[:space:]]+d[[:space:]]+e[[:space:]]+h" $WITH_x 860 atf_check -e ignore -o not-empty -s exit:0 \ 861 egrep "i[[:space:]]+klmn[[:space:]]+opqr[[:space:]]+stuv[[:space:]]+wxyz" $WITH_x 862} 863 864atf_test_case y_flag 865y_flag_head() 866{ 867 atf_set "descr" "Verify that the output from ls -y sorts the same way as sort(1)" 868} 869 870y_flag_body() 871{ 872 create_test_inputs 873 874 WITH_sort=$PWD/../with_sort.out 875 WITH_y=$PWD/../with_y.out 876 877 atf_check -e empty -o save:$WITH_sort -s exit:0 sh -c 'ls -1 | sort' 878 atf_check -e empty -o save:$WITH_y -s exit:0 ls -1y 879 880 echo "Sorted with sort(1)" 881 cat $WITH_sort 882 echo "Sorted with -y" 883 cat $WITH_y 884 885 atf_check_equal "$(cat $WITH_sort)" "$(cat $WITH_y)" 886} 887 888atf_test_case 1_flag 8891_flag_head() 890{ 891 atf_set "descr" "Verify that -1 prints out one item per line" 892} 893 8941_flag_body() 895{ 896 create_test_inputs 897 898 WITH_1=$PWD/../with_1.out 899 WITHOUT_1=$PWD/../without_1.out 900 901 atf_check -e empty -o save:$WITH_1 -s exit:0 ls -1 902 atf_check -e empty -o save:$WITHOUT_1 -s exit:0 \ 903 sh -c 'for i in $(ls); do echo $i; done' 904 905 echo "Explicit -1 usage" 906 cat $WITH_1 907 echo "No -1 usage" 908 cat $WITHOUT_1 909 910 atf_check_equal "$(cat $WITH_1)" "$(cat $WITHOUT_1)" 911} 912 913atf_init_test_cases() 914{ 915 export BLOCKSIZE=512 916 917 atf_add_test_case A_flag 918 atf_add_test_case A_flag_implied_when_root 919 atf_add_test_case B_flag 920 atf_add_test_case C_flag 921 atf_add_test_case D_flag 922 atf_add_test_case F_flag 923 #atf_add_test_case G_flag 924 atf_add_test_case H_flag 925 atf_add_test_case I_flag 926 atf_add_test_case I_flag_voids_implied_A_flag_when_root 927 atf_add_test_case L_flag 928 #atf_add_test_case P_flag 929 atf_add_test_case R_flag 930 atf_add_test_case S_flag 931 atf_add_test_case T_flag 932 #atf_add_test_case U_flag 933 #atf_add_test_case W_flag 934 #atf_add_test_case Z_flag 935 atf_add_test_case a_flag 936 atf_add_test_case b_flag 937 #atf_add_test_case c_flag 938 atf_add_test_case d_flag 939 atf_add_test_case f_flag 940 atf_add_test_case g_flag 941 atf_add_test_case h_flag 942 atf_add_test_case i_flag 943 atf_add_test_case k_flag 944 atf_add_test_case l_flag 945 atf_add_test_case lcomma_flag 946 atf_add_test_case m_flag 947 atf_add_test_case n_flag 948 atf_add_test_case o_flag 949 atf_add_test_case p_flag 950 atf_add_test_case q_flag_and_w_flag 951 atf_add_test_case r_flag 952 atf_add_test_case s_flag 953 atf_add_test_case t_flag 954 atf_add_test_case u_flag 955 atf_add_test_case x_flag 956 atf_add_test_case y_flag 957 atf_add_test_case 1_flag 958} 959