| /haiku/src/add-ons/media/media-add-ons/usb_webcam/sensors/ |
| H A D | tas5130d1b.cpp | 84 Device()->WriteReg8(SN9C102_CHIP_CTRL, 0x01); /* power down the sensor */
85 Device()->WriteReg8(SN9C102_CLOCK_SEL, 0x20); /* enable sensor clk */
86 Device()->WriteReg8(SN9C102_CHIP_CTRL, 0x04); /* power up the sensor, enable tx, sysclk@12MHz */
87 Device()->WriteReg8(SN9C102_R_B_GAIN, 0x01); /* red gain = 1+0/8 = 1, red gain = 1+1/8 !!? */
88 Device()->WriteReg8(SN9C102_G_GAIN, 0x00); /* green gain = 1+0/8 = 1 */
89 Device()->WriteReg8(SN9C102_OFFSET, 0x0a); /* 0 pix offset */
90 Device()->WriteReg8(SN9C102_CLOCK_SEL, 0x60); /* enable sensor clk, and invert it */
91 Device()->WriteReg8(SN9C102_SYNC_N_SCALE, 0x06); /* no compression, normal curve,
95 Device()->WriteReg8(SN9C102_PIX_CLK, 0xf3); /* pixclk = masterclk, sensor is slave mode */
109 Device()->WriteReg8(SN9C102_H_SIZ
[all...] |
| H A D | tas5110c1b.cpp | 80 Device()->WriteReg8(SN9C102_CHIP_CTRL, 0x01); /* power down the sensor */
81 Device()->WriteReg8(SN9C102_CHIP_CTRL, 0x44); /* power up the sensor, enable tx, sysclk@24MHz */
82 Device()->WriteReg8(SN9C102_CHIP_CTRL, 0x04); /* power up the sensor, enable tx, sysclk@24MHz */
83 Device()->WriteReg8(SN9C102_R_B_GAIN, 0x00); /* red, blue gain = 1+0/8 = 1 */
84 Device()->WriteReg8(SN9C102_G_GAIN, 0x00); /* green gain = 1+0/8 = 1 */
85 Device()->WriteReg8(SN9C102_OFFSET, 0x0a); /* 10 pix offset */
86 Device()->WriteReg8(SN9C102_CLOCK_SEL, 0x60); /* enable sensor clk, and invert it */
87 Device()->WriteReg8(SN9C102_CLOCK_SEL, 0x60); /* enable sensor clk, and invert it */
88 Device()->WriteReg8(SN9C102_SYNC_N_SCALE, 0x06); /* no compression, normal curve,
92 Device()->WriteReg8(SN9C102_PIX_CL
[all...] |
| H A D | pas106b.cpp | 58 Device()->WriteReg8(SN9C102_CHIP_CTRL, 0x00); /* power on the sensor, Fsys_clk=12MHz */
59 Device()->WriteReg8(SN9C102_CLOCK_SEL, 0x17); /* enable sensor, force 24MHz */
|
| /haiku/src/add-ons/accelerants/s3/ |
| H A D | virge_edid.cpp | 76 WriteReg8(DDC_REG, reg);
114 WriteReg8(DDC_REG, tmp | 0x13);
118 WriteReg8(DDC_REG, tmp);
|
| H A D | register_io.h | 41 void WriteReg8(uint32 addr, uint8 value);
|
| H A D | register_io.cpp | 92 void WriteReg8(uint32 addr, uint8 value) function
|
| H A D | savage_init.cpp | 157 WriteReg8(VGA_ENABLE + 0x8000, ReadReg8(VGA_ENABLE + 0x8000) | 0x01);
|
| /haiku/src/add-ons/media/media-add-ons/usb_webcam/addons/sonix/ |
| H A D | SonixCamDevice.cpp | 145 WriteReg8(SN9C102_CHIP_CTRL, 0x44);
147 WriteReg8(SN9C102_CLOCK_SEL /*0x17*/, 0x29);
167 WriteReg8(SN9C102_SYNC_N_SCALE, 0x86);
169 WriteReg8(SN9C102_CHIP_CTRL, 0x44); // again ??
174 WriteReg8(SN9C102_PIX_CLK, 0x2b);
180 WriteReg8(SN9C102_PIX_CLK, 0x4b);
191 WriteReg8(SN9C102_PIX_CLK, 0x4b);
197 //WriteReg8(SN9C102_PIX_CLK, 0x4b);
252 err = WriteReg8(SN9C102_CHIP_CTRL, r);
273 err = WriteReg8(SN9C102_CHIP_CTR
[all...] |
| /haiku/src/add-ons/kernel/drivers/ports/pc_serial/ |
| H A D | SerialDevice.cpp | 98 WriteReg8(IER, fCachedIER);
101 WriteReg8(LCR, 0);
169 WriteReg8(FCR, fcr);
172 WriteReg8(LCR, lcr | LCR_DLAB);
174 WriteReg8(DLLB, divisor & 0x00ff);
175 WriteReg8(DLHB, divisor >> 8);
176 //WriteReg8(2,0);
180 WriteReg8(LCR, lcr);
276 WriteReg8(IER, fCachedIER);
277 WriteReg8(MC
1083 SerialDevice::WriteReg8(int reg, uint8 value) function in class:SerialDevice
[all...] |
| H A D | SerialDevice.h | 97 void WriteReg8(int reg, uint8 value);
|
| /haiku/src/add-ons/media/media-add-ons/usb_webcam/addons/quickcam/ |
| H A D | QuickCamDevice.cpp | 73 err = WriteReg8(SN9C102_CHIP_CTRL, r);
95 err = WriteReg8(SN9C102_CHIP_CTRL, r);
230 WriteReg8(STV_REG23, 0);
233 WriteReg8(STV_REG23, 1);
|
| /haiku/src/add-ons/media/media-add-ons/usb_webcam/addons/ |
| H A D | NW80xCamDevice.cpp | 107 err = WriteReg8(SN9C102_CHIP_CTRL, r);
130 err = WriteReg8(SN9C102_CHIP_CTRL, r);
265 WriteReg8(STV_REG23, 0);
268 WriteReg8(STV_REG23, 1);
|
| /haiku/src/add-ons/media/media-add-ons/usb_webcam/ |
| H A D | CamSensor.h | 52 virtual status_t WriteReg8(uint16 address, uint8 data);
|
| H A D | CamDevice.cpp | 340 CamDevice::WriteReg8(uint16 address, uint8 data) function in class:CamDevice
372 return WriteReg8(address, value);
383 return WriteReg8(address, value);
|
| H A D | CamDevice.h | 99 virtual ssize_t WriteReg8(uint16 address, uint8 data);
|
| /haiku/src/add-ons/kernel/busses/pci/ecam/ |
| H A D | ECAMPCIController.cpp | 45 WriteReg8(addr_t adr, uint32 value) function
210 case 1: WriteReg8(address, value); break;
|
| /haiku/src/add-ons/kernel/busses/pci/designware/ |
| H A D | DWPCIController.cpp | 44 WriteReg8(addr_t adr, uint32 value) function
359 case 1: WriteReg8(address, value); break;
|
| /haiku/src/add-ons/kernel/busses/usb/ |
| H A D | uhci.h | 202 inline void WriteReg8(uint32 reg, uint8 value);
|
| H A D | uhci.cpp | 1844 WriteReg8(UHCI_SOFMOD, sofValue);
2483 UHCI::WriteReg8(uint32 reg, uint8 value) function in class:UHCI
|