Searched hist:313790 (Results 1 - 8 of 8) sorted by relevance
/freebsd-10-stable/share/man/man7/ | ||
H A D | build.7 | diff 313790 Thu Feb 16 05:16:31 MST 2017 ngie MFC r285119,r292502,r295380: r285119 (by jmmv): Add support for TEST_METADATA Allow Makefiles to define generic metadata settings that apply to all test programs defined by a Makefile. The generic TEST_METADATA variable extends the per-test program settings already supported via TEST_METADATA.<program>. This feature will be useful to easily apply some settings to all programs in a directory. In particular, Kyua 0.12 will support parallel execution of test programs and a bunch of them will need to be tagged as is_exclusive to indicate that they cannot be run in parallel with anything else due to their side-effects. It will be reasonable to set this setting on whole directories. r292502: Always expose LOCALBASE, not just when CROSS_TOOLCHAIN is defined Instead of using which(1) to look for doxygen, look for it in <LOCALBASE>/bin . $PATH gets mangled by make buildenv, etc so it's better to just be explicit about the path if someone uses that for instance. r295380: Simplify running the FreeBSD test suite Replace `make regress` (legacy test make target) and `make test` (incomplete test make target added with the FreeBSD test suite) with make check as it's consistent with other open source projects. `make check` defaults to running tests from `.OBJDIR`, but can be overridden with the `CHECKDIR` variable. Add `make checkworld` target to simplify running the FreeBSD test suite from `TESTSBASE` (i.e. the top-level tests directory), similar to buildworld. Document `make check` and `make checkworld` in build(7). Other minor changes: - Rename intermediate file (`Kyuafile.auto`) to `Kyuafile` to simplify `make check`. - Remove terse warnings attached to `beforetest`/`aftertest`. - Add kyua binary check to check target in suite.test.mk; error out if it's not found The MFC is [partly] contingent on other build related changes being MFCed. X-MFC to: stable/10 Relnotes: yes |
/freebsd-10-stable/share/mk/ | ||
H A D | suite.test.mk | diff 313790 Thu Feb 16 05:16:31 MST 2017 ngie MFC r285119,r292502,r295380: r285119 (by jmmv): Add support for TEST_METADATA Allow Makefiles to define generic metadata settings that apply to all test programs defined by a Makefile. The generic TEST_METADATA variable extends the per-test program settings already supported via TEST_METADATA.<program>. This feature will be useful to easily apply some settings to all programs in a directory. In particular, Kyua 0.12 will support parallel execution of test programs and a bunch of them will need to be tagged as is_exclusive to indicate that they cannot be run in parallel with anything else due to their side-effects. It will be reasonable to set this setting on whole directories. r292502: Always expose LOCALBASE, not just when CROSS_TOOLCHAIN is defined Instead of using which(1) to look for doxygen, look for it in <LOCALBASE>/bin . $PATH gets mangled by make buildenv, etc so it's better to just be explicit about the path if someone uses that for instance. r295380: Simplify running the FreeBSD test suite Replace `make regress` (legacy test make target) and `make test` (incomplete test make target added with the FreeBSD test suite) with make check as it's consistent with other open source projects. `make check` defaults to running tests from `.OBJDIR`, but can be overridden with the `CHECKDIR` variable. Add `make checkworld` target to simplify running the FreeBSD test suite from `TESTSBASE` (i.e. the top-level tests directory), similar to buildworld. Document `make check` and `make checkworld` in build(7). Other minor changes: - Rename intermediate file (`Kyuafile.auto`) to `Kyuafile` to simplify `make check`. - Remove terse warnings attached to `beforetest`/`aftertest`. - Add kyua binary check to check target in suite.test.mk; error out if it's not found The MFC is [partly] contingent on other build related changes being MFCed. X-MFC to: stable/10 Relnotes: yes |
H A D | bsd.subdir.mk | diff 313790 Thu Feb 16 05:16:31 MST 2017 ngie MFC r285119,r292502,r295380: r285119 (by jmmv): Add support for TEST_METADATA Allow Makefiles to define generic metadata settings that apply to all test programs defined by a Makefile. The generic TEST_METADATA variable extends the per-test program settings already supported via TEST_METADATA.<program>. This feature will be useful to easily apply some settings to all programs in a directory. In particular, Kyua 0.12 will support parallel execution of test programs and a bunch of them will need to be tagged as is_exclusive to indicate that they cannot be run in parallel with anything else due to their side-effects. It will be reasonable to set this setting on whole directories. r292502: Always expose LOCALBASE, not just when CROSS_TOOLCHAIN is defined Instead of using which(1) to look for doxygen, look for it in <LOCALBASE>/bin . $PATH gets mangled by make buildenv, etc so it's better to just be explicit about the path if someone uses that for instance. r295380: Simplify running the FreeBSD test suite Replace `make regress` (legacy test make target) and `make test` (incomplete test make target added with the FreeBSD test suite) with make check as it's consistent with other open source projects. `make check` defaults to running tests from `.OBJDIR`, but can be overridden with the `CHECKDIR` variable. Add `make checkworld` target to simplify running the FreeBSD test suite from `TESTSBASE` (i.e. the top-level tests directory), similar to buildworld. Document `make check` and `make checkworld` in build(7). Other minor changes: - Rename intermediate file (`Kyuafile.auto`) to `Kyuafile` to simplify `make check`. - Remove terse warnings attached to `beforetest`/`aftertest`. - Add kyua binary check to check target in suite.test.mk; error out if it's not found The MFC is [partly] contingent on other build related changes being MFCed. X-MFC to: stable/10 Relnotes: yes |
H A D | bsd.README | diff 313790 Thu Feb 16 05:16:31 MST 2017 ngie MFC r285119,r292502,r295380: r285119 (by jmmv): Add support for TEST_METADATA Allow Makefiles to define generic metadata settings that apply to all test programs defined by a Makefile. The generic TEST_METADATA variable extends the per-test program settings already supported via TEST_METADATA.<program>. This feature will be useful to easily apply some settings to all programs in a directory. In particular, Kyua 0.12 will support parallel execution of test programs and a bunch of them will need to be tagged as is_exclusive to indicate that they cannot be run in parallel with anything else due to their side-effects. It will be reasonable to set this setting on whole directories. r292502: Always expose LOCALBASE, not just when CROSS_TOOLCHAIN is defined Instead of using which(1) to look for doxygen, look for it in <LOCALBASE>/bin . $PATH gets mangled by make buildenv, etc so it's better to just be explicit about the path if someone uses that for instance. r295380: Simplify running the FreeBSD test suite Replace `make regress` (legacy test make target) and `make test` (incomplete test make target added with the FreeBSD test suite) with make check as it's consistent with other open source projects. `make check` defaults to running tests from `.OBJDIR`, but can be overridden with the `CHECKDIR` variable. Add `make checkworld` target to simplify running the FreeBSD test suite from `TESTSBASE` (i.e. the top-level tests directory), similar to buildworld. Document `make check` and `make checkworld` in build(7). Other minor changes: - Rename intermediate file (`Kyuafile.auto`) to `Kyuafile` to simplify `make check`. - Remove terse warnings attached to `beforetest`/`aftertest`. - Add kyua binary check to check target in suite.test.mk; error out if it's not found The MFC is [partly] contingent on other build related changes being MFCed. X-MFC to: stable/10 Relnotes: yes |
H A D | bsd.sys.mk | diff 313790 Thu Feb 16 05:16:31 MST 2017 ngie MFC r285119,r292502,r295380: r285119 (by jmmv): Add support for TEST_METADATA Allow Makefiles to define generic metadata settings that apply to all test programs defined by a Makefile. The generic TEST_METADATA variable extends the per-test program settings already supported via TEST_METADATA.<program>. This feature will be useful to easily apply some settings to all programs in a directory. In particular, Kyua 0.12 will support parallel execution of test programs and a bunch of them will need to be tagged as is_exclusive to indicate that they cannot be run in parallel with anything else due to their side-effects. It will be reasonable to set this setting on whole directories. r292502: Always expose LOCALBASE, not just when CROSS_TOOLCHAIN is defined Instead of using which(1) to look for doxygen, look for it in <LOCALBASE>/bin . $PATH gets mangled by make buildenv, etc so it's better to just be explicit about the path if someone uses that for instance. r295380: Simplify running the FreeBSD test suite Replace `make regress` (legacy test make target) and `make test` (incomplete test make target added with the FreeBSD test suite) with make check as it's consistent with other open source projects. `make check` defaults to running tests from `.OBJDIR`, but can be overridden with the `CHECKDIR` variable. Add `make checkworld` target to simplify running the FreeBSD test suite from `TESTSBASE` (i.e. the top-level tests directory), similar to buildworld. Document `make check` and `make checkworld` in build(7). Other minor changes: - Rename intermediate file (`Kyuafile.auto`) to `Kyuafile` to simplify `make check`. - Remove terse warnings attached to `beforetest`/`aftertest`. - Add kyua binary check to check target in suite.test.mk; error out if it's not found The MFC is [partly] contingent on other build related changes being MFCed. X-MFC to: stable/10 Relnotes: yes |
H A D | bsd.test.mk | diff 313790 Thu Feb 16 05:16:31 MST 2017 ngie MFC r285119,r292502,r295380: r285119 (by jmmv): Add support for TEST_METADATA Allow Makefiles to define generic metadata settings that apply to all test programs defined by a Makefile. The generic TEST_METADATA variable extends the per-test program settings already supported via TEST_METADATA.<program>. This feature will be useful to easily apply some settings to all programs in a directory. In particular, Kyua 0.12 will support parallel execution of test programs and a bunch of them will need to be tagged as is_exclusive to indicate that they cannot be run in parallel with anything else due to their side-effects. It will be reasonable to set this setting on whole directories. r292502: Always expose LOCALBASE, not just when CROSS_TOOLCHAIN is defined Instead of using which(1) to look for doxygen, look for it in <LOCALBASE>/bin . $PATH gets mangled by make buildenv, etc so it's better to just be explicit about the path if someone uses that for instance. r295380: Simplify running the FreeBSD test suite Replace `make regress` (legacy test make target) and `make test` (incomplete test make target added with the FreeBSD test suite) with make check as it's consistent with other open source projects. `make check` defaults to running tests from `.OBJDIR`, but can be overridden with the `CHECKDIR` variable. Add `make checkworld` target to simplify running the FreeBSD test suite from `TESTSBASE` (i.e. the top-level tests directory), similar to buildworld. Document `make check` and `make checkworld` in build(7). Other minor changes: - Rename intermediate file (`Kyuafile.auto`) to `Kyuafile` to simplify `make check`. - Remove terse warnings attached to `beforetest`/`aftertest`. - Add kyua binary check to check target in suite.test.mk; error out if it's not found The MFC is [partly] contingent on other build related changes being MFCed. X-MFC to: stable/10 Relnotes: yes |
/freebsd-10-stable/ | ||
H A D | Makefile | diff 313790 Thu Feb 16 05:16:31 MST 2017 ngie MFC r285119,r292502,r295380: r285119 (by jmmv): Add support for TEST_METADATA Allow Makefiles to define generic metadata settings that apply to all test programs defined by a Makefile. The generic TEST_METADATA variable extends the per-test program settings already supported via TEST_METADATA.<program>. This feature will be useful to easily apply some settings to all programs in a directory. In particular, Kyua 0.12 will support parallel execution of test programs and a bunch of them will need to be tagged as is_exclusive to indicate that they cannot be run in parallel with anything else due to their side-effects. It will be reasonable to set this setting on whole directories. r292502: Always expose LOCALBASE, not just when CROSS_TOOLCHAIN is defined Instead of using which(1) to look for doxygen, look for it in <LOCALBASE>/bin . $PATH gets mangled by make buildenv, etc so it's better to just be explicit about the path if someone uses that for instance. r295380: Simplify running the FreeBSD test suite Replace `make regress` (legacy test make target) and `make test` (incomplete test make target added with the FreeBSD test suite) with make check as it's consistent with other open source projects. `make check` defaults to running tests from `.OBJDIR`, but can be overridden with the `CHECKDIR` variable. Add `make checkworld` target to simplify running the FreeBSD test suite from `TESTSBASE` (i.e. the top-level tests directory), similar to buildworld. Document `make check` and `make checkworld` in build(7). Other minor changes: - Rename intermediate file (`Kyuafile.auto`) to `Kyuafile` to simplify `make check`. - Remove terse warnings attached to `beforetest`/`aftertest`. - Add kyua binary check to check target in suite.test.mk; error out if it's not found The MFC is [partly] contingent on other build related changes being MFCed. X-MFC to: stable/10 Relnotes: yes |
H A D | Makefile.inc1 | diff 313790 Thu Feb 16 05:16:31 MST 2017 ngie MFC r285119,r292502,r295380: r285119 (by jmmv): Add support for TEST_METADATA Allow Makefiles to define generic metadata settings that apply to all test programs defined by a Makefile. The generic TEST_METADATA variable extends the per-test program settings already supported via TEST_METADATA.<program>. This feature will be useful to easily apply some settings to all programs in a directory. In particular, Kyua 0.12 will support parallel execution of test programs and a bunch of them will need to be tagged as is_exclusive to indicate that they cannot be run in parallel with anything else due to their side-effects. It will be reasonable to set this setting on whole directories. r292502: Always expose LOCALBASE, not just when CROSS_TOOLCHAIN is defined Instead of using which(1) to look for doxygen, look for it in <LOCALBASE>/bin . $PATH gets mangled by make buildenv, etc so it's better to just be explicit about the path if someone uses that for instance. r295380: Simplify running the FreeBSD test suite Replace `make regress` (legacy test make target) and `make test` (incomplete test make target added with the FreeBSD test suite) with make check as it's consistent with other open source projects. `make check` defaults to running tests from `.OBJDIR`, but can be overridden with the `CHECKDIR` variable. Add `make checkworld` target to simplify running the FreeBSD test suite from `TESTSBASE` (i.e. the top-level tests directory), similar to buildworld. Document `make check` and `make checkworld` in build(7). Other minor changes: - Rename intermediate file (`Kyuafile.auto`) to `Kyuafile` to simplify `make check`. - Remove terse warnings attached to `beforetest`/`aftertest`. - Add kyua binary check to check target in suite.test.mk; error out if it's not found The MFC is [partly] contingent on other build related changes being MFCed. X-MFC to: stable/10 Relnotes: yes |
Completed in 109 milliseconds