/*- * SPDX-License-Identifier: BSD-2-Clause-FreeBSD * * Copyright (c) 2006 Wojciech A. Koszek * Copyright (c) 2012-2014 Robert N. M. Watson * All rights reserved. * * This software was developed by SRI International and the University of * Cambridge Computer Laboratory under DARPA/AFRL contract (FA8750-10-C-0237) * ("CTSRD"), as part of the DARPA CRASH research programme. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include __FBSDID("$FreeBSD: stable/11/sys/mips/beri/beri_machdep.c 330897 2018-03-14 03:19:51Z eadler $"); #include "opt_ddb.h" #include "opt_platform.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef FDT #include #include #endif #include #include #include #include #include #include #include #include #include #include #include #include extern int *edata; extern int *end; void platform_cpu_init() { /* Nothing special */ } static void mips_init(void) { int i; #ifdef FDT struct mem_region mr[FDT_MEM_REGIONS]; uint64_t val; int mr_cnt; int j; #endif for (i = 0; i < 10; i++) { phys_avail[i] = 0; } /* phys_avail regions are in bytes */ phys_avail[0] = MIPS_KSEG0_TO_PHYS(kernel_kseg0_end); phys_avail[1] = ctob(realmem); dump_avail[0] = phys_avail[0]; dump_avail[1] = phys_avail[1]; physmem = realmem; #ifdef FDT if (fdt_get_mem_regions(mr, &mr_cnt, &val) == 0) { physmem = btoc(val); KASSERT((phys_avail[0] >= mr[0].mr_start) && \ (phys_avail[0] < (mr[0].mr_start + mr[0].mr_size)), ("First region is not within FDT memory range")); /* Limit size of the first region */ phys_avail[1] = (mr[0].mr_start + MIN(mr[0].mr_size, ctob(realmem))); dump_avail[1] = phys_avail[1]; /* Add the rest of regions */ for (i = 1, j = 2; i < mr_cnt; i++, j+=2) { phys_avail[j] = mr[i].mr_start; phys_avail[j+1] = (mr[i].mr_start + mr[i].mr_size); dump_avail[j] = phys_avail[j]; dump_avail[j+1] = phys_avail[j+1]; } } #endif init_param1(); init_param2(physmem); mips_cpu_init(); pmap_bootstrap(); mips_proc0_init(); mutex_init(); kdb_init(); #ifdef KDB if (boothowto & RB_KDB) kdb_enter(KDB_WHY_BOOTFLAGS, "Boot flags requested debugger"); #endif } /* * Perform a board-level soft-reset. */ void platform_reset(void) { /* XXX SMP will likely require us to do more. */ __asm__ __volatile__( "mfc0 $k0, $12\n\t" "li $k1, 0x00100000\n\t" "or $k0, $k0, $k1\n\t" "mtc0 $k0, $12\n"); for( ; ; ) __asm__ __volatile("wait"); } #ifdef FDT /* Parse cmd line args as env - copied from xlp_machdep. */ /* XXX-BZ this should really be centrally provided for all (boot) code. */ static void _parse_bootargs(char *cmdline) { char *n, *v; while ((v = strsep(&cmdline, " \n")) != NULL) { if (*v == '\0') continue; if (*v == '-') { while (*v != '\0') { v++; switch (*v) { case 'a': boothowto |= RB_ASKNAME; break; /* Someone should simulate that ;-) */ case 'C': boothowto |= RB_CDROM; break; case 'd': boothowto |= RB_KDB; break; case 'D': boothowto |= RB_MULTIPLE; break; case 'm': boothowto |= RB_MUTE; break; case 'g': boothowto |= RB_GDB; break; case 'h': boothowto |= RB_SERIAL; break; case 'p': boothowto |= RB_PAUSE; break; case 'r': boothowto |= RB_DFLTROOT; break; case 's': boothowto |= RB_SINGLE; break; case 'v': boothowto |= RB_VERBOSE; break; } } } else { n = strsep(&v, "="); if (v == NULL) kern_setenv(n, "1"); else kern_setenv(n, v); } } } #endif void platform_start(__register_t a0, __register_t a1, __register_t a2, __register_t a3) { struct bootinfo *bootinfop; vm_offset_t kernend; uint64_t platform_counter_freq; int argc = a0; char **argv = (char **)a1; char **envp = (char **)a2; long memsize; #ifdef FDT char buf[2048]; /* early stack supposedly big enough */ vm_offset_t dtbp; phandle_t chosen; void *kmdp; #endif int i; /* clear the BSS and SBSS segments */ kernend = (vm_offset_t)&end; memset(&edata, 0, kernend - (vm_offset_t)(&edata)); mips_postboot_fixup(); mips_pcpu0_init(); /* * Over time, we've changed out boot-time binary interface for the * kernel. Miniboot simply provides a 'memsize' in a3, whereas the * FreeBSD boot loader provides a 'bootinfo *' in a3. While slightly * grody, we support both here by detecting 'pointer-like' values in * a3 and assuming physical memory can never be that back. * * XXXRW: Pull more values than memsize out of bootinfop -- e.g., * module information. */ if (a3 >= 0x9800000000000000ULL) { bootinfop = (void *)a3; memsize = bootinfop->bi_memsize; preload_metadata = (caddr_t)bootinfop->bi_modulep; } else { bootinfop = NULL; memsize = a3; } #ifdef FDT /* * Find the dtb passed in by the boot loader (currently fictional). */ kmdp = preload_search_by_type("elf kernel"); dtbp = MD_FETCH(kmdp, MODINFOMD_DTBP, vm_offset_t); #if defined(FDT_DTB_STATIC) /* * In case the device tree blob was not retrieved (from metadata) try * to use the statically embedded one. */ if (dtbp == (vm_offset_t)NULL) dtbp = (vm_offset_t)&fdt_static_dtb; #else #error "Non-static FDT not yet supported on BERI" #endif if (OF_install(OFW_FDT, 0) == FALSE) while (1); if (OF_init((void *)dtbp) != 0) while (1); /* * Configure more boot-time parameters passed in by loader. */ boothowto = MD_FETCH(kmdp, MODINFOMD_HOWTO, int); init_static_kenv(MD_FETCH(kmdp, MODINFOMD_ENVP, char *), 0); /* * Get bootargs from FDT if specified. */ chosen = OF_finddevice("/chosen"); if (OF_getprop(chosen, "bootargs", buf, sizeof(buf)) != -1) _parse_bootargs(buf); #endif /* * XXXRW: We have no way to compare wallclock time to cycle rate on * BERI, so for now assume we run at the MALTA default (100MHz). */ platform_counter_freq = MIPS_DEFAULT_HZ; mips_timer_early_init(platform_counter_freq); cninit(); printf("entry: platform_start()\n"); bootverbose = 1; if (bootverbose) { printf("cmd line: "); for (i = 0; i < argc; i++) printf("%s ", argv[i]); printf("\n"); printf("envp:\n"); for (i = 0; envp[i]; i += 2) printf("\t%s = %s\n", envp[i], envp[i+1]); if (bootinfop != NULL) printf("bootinfo found at %p\n", bootinfop); printf("memsize = %p\n", (void *)memsize); } realmem = btoc(memsize); mips_init(); mips_timer_init_params(platform_counter_freq, 0); }