Lines Matching defs:channel
1389 wpi_eeprom_channel_flags(struct wpi_eeprom_chan *channel)
1394 if ((channel->flags & WPI_EEPROM_CHAN_ACTIVE) == 0)
1396 if ((channel->flags & WPI_EEPROM_CHAN_IBSS) == 0)
1398 if (channel->flags & WPI_EEPROM_CHAN_RADAR) {
1445 /* Save maximum allowed TX power for this channel. */
1522 struct wpi_eeprom_chan *channel;
1524 channel = wpi_find_eeprom_channel(sc, c);
1525 if (channel == NULL) {
1526 ic_printf(ic, "%s: invalid channel %u freq %u/0x%x\n",
1530 c->ic_flags |= wpi_eeprom_channel_flags(channel);
2341 "%s: scanning channel %d status %x\n",
3682 * Set TX power for current channel.
3692 /* Retrieve current channel from last RXON. */
3696 /* Find the TX power group to which this channel belongs. */
3710 /* Retrieve TX power for this channel/rate. */
3730 * Determine Tx power index for a given channel/rate combination.
3765 /* Never exceed the channel maximum allowed TX power. */
3933 * Configure the card to listen to a particular channel, this transisions the
3964 /* Set default channel. */
4022 /* No channel? Default to 2GHz settings. */
4143 * Move to the next channel if no packets are received within 10 msecs
4214 * Construct information about the channel that we
5583 * that the channel should be changed
5604 * Only need to set the channel in Monitor mode. AP scanning and auth
5619 "%s: error %d setting channel\n", __func__,
5627 * channel. The channel is previously be set via the wpi_set_channel