dev/pci/if_iwxreg.h

633 #define IWX_CSR_FH_INT_BIT_RX_CHNL1  (1 << 17) /* Rx channel 1 */
634 #define IWX_CSR_FH_INT_BIT_RX_CHNL0  (1 << 16) /* Rx channel 0 */
635 #define IWX_CSR_FH_INT_BIT_TX_CHNL1  (1 << 1)  /* Tx channel 1 */
636 #define IWX_CSR_FH_INT_BIT_TX_CHNL0  (1 << 0)  /* Tx channel 0 */
837  * Bits 31:30: Enable the SRAM DMA channel.
1295  *	channel in DS parameter set element in probe requests.
1301  * @IWX_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH: supports TDLS channel switching
2127  * channel flags in NVM
2128  * @IWX_NVM_CHANNEL_VALID: channel is usable for this SKU/geo
2129  * @IWX_NVM_CHANNEL_IBSS: usable as an IBSS channel
2134  *	on same channel on 2.4 or same UNII band on 5.2
2136  * @IWX_NVM_CHANNEL_WIDE: 20 MHz channel okay (?)
2137  * @IWX_NVM_CHANNEL_40MHZ: 40 MHz channel okay (?)
2138  * @IWX_NVM_CHANNEL_80MHZ: 80 MHz channel okay (?)
2139  * @IWX_NVM_CHANNEL_160MHZ: 160 MHz channel okay (?)
2236  * @channel_profile: regulatory data of this channel
2249  * @channel_profile: regulatory data of this channel
2602  * @FW_DBG_TRIGGER_CHANNEL_SWITCH: trigger log collection upon channel switch.
2980  * of the device on the channel. Since the fw supports multiple channels
2981  * concurrently, the fw may choose to jump to another channel at any time.
2982  * In order to make sure that the fw is on a specific channel at a certain time
2988  * smoothly and won't be interrupted by channel switch decided within the fw.
2994  * When the driver needs to make sure we are in a certain channel, at a certain
3294 /* Supported channel width, vary if there is VHT support */
3301  * Control channel position:
3302  * For legacy set bit means upper channel, otherwise lower.
3323  * @channel: channel number
3325  * @ctrl channel: PHY_[VHT|LEGACY]_CTRL_*
3329 	uint8_t channel;
3335  * struct iwx_fw_channel_info - channel information
3337  * @channel: channel number
3340  * @ctrl channel: PHY_[VHT|LEGACY]_CTRL_*
3344 	uint32_t channel;
3382  * @ci: channel info
3499  * @channel: channel number
3520 	uint16_t channel;
3648 	uint8_t channel;
3684 	uint8_t channel;
3938 					 * our serving channel */
3940 				 * serving channel */
4085  * one channel that has just been scanned.
5243 /* Bit 25: duplicate channel enabled
5505  * enum iwx_tlc_mng_cfg_cw - channel width options
5506  * @IWX_TLC_MNG_CH_WIDTH_20MHZ: 20MHZ channel
5507  * @IWX_TLC_MNG_CH_WIDTH_40MHZ: 40MHZ channel
5508  * @IWX_TLC_MNG_CH_WIDTH_80MHZ: 80MHZ channel
5509  * @IWX_TLC_MNG_CH_WIDTH_160MHZ: 160MHZ channel
5510  * @IWX_TLC_MNG_CH_WIDTH_320MHZ: 320MHZ channel
5601  * @max_ch_width: max supported channel width from @enum iwx_tlc_mng_cfg_cw
5607  * @ht_rates: MCS index 0 - 11, per <nss, channel-width>
5610  * @sgi_ch_width_supp: bitmap of SGI support per channel width
5636  * @max_ch_width: max supported channel width from @enum iwx_tlc_mng_cfg_cw
5639  * @sgi_ch_width_supp: bitmap of SGI support per channel width
5643  * @ht_rates: MCS index 0 - 11, per <nss, channel-width>
6332  * each channel may select different ssids from among the 20 entries.
6391  * @channel_number:	channel number 1-13 etc
6392  * @iter_count:		scan iteration on this channel
6393  * @iter_interval:	interval in seconds between iterations on one channel
6492  * struct iwx_scan_results_notif - scan results for one channel -
6494  * @channel: which channel the results are from
6498  * @duration: duration spent in channel, in usecs
6501 	uint8_t channel;
6667  * @out_of_channel_time:	default max out of serving channel time
6675  * @channel_flags:		default channel flags - enum iwx_channel_flags
6731  *	notification per channel or not.
6732  * @IWX_UMAC_SCAN_GEN_FLAGS2_ALLOW_CHNL_REORDER: Whether to allow channel
6753  *                                             for active channel
6780  * @channel_num:	channel number 1-13 etc.
6781  * @iter_count:		repetition count for the channel.
6782  * @iter_interval:	interval between two scan iterations on one channel.
6853  * @flags: channel flags &enum iwl_scan_channel_flags
6870  * @ooc_priority: out of channel priority - &enum iwl_scan_priority
6878  *	per channel
6880  *	number of APs per social (1,6,11) channel
6884  * @max_out_time: max out of serving channel time, per LMAC - for CDB there
6890  * @channel: &struct iwx_scan_umac_chan_param
6913 			struct iwx_scan_umac_chan_param channel;
6924 			struct iwx_scan_umac_chan_param channel;
6938 			struct iwx_scan_umac_chan_param channel;
6953 			struct iwx_scan_umac_chan_param channel;
6968 			struct iwx_scan_umac_chan_param channel;
6986  *                        for 2.4GHz channel
6990  *                             APs per social channel
6994  * @max_out_of_time: max out of serving channel time, per LMAC
6997  * @passive_dwell: continues dwell time for passive channel
7021  * @flags: channel flags &enum iwl_scan_channel_flags
7027  * @channel_config: array of explicit channel configurations
7089  * @ooc_priority: out of channel priority - &enum iwx_scan_priority
7132  * @channel: channel where the match occurred
7141 	uint8_t channel;
7179  * @last_channel: last channel that was scanned
7223  * @IWX_STA_FLG_FAT_EN_MSK: support for channel width (for Tx). This flag is
7225  *	action frames that can change the channel width. When cleared the fw
7226  *	will send all the frames in 20MHz even when FAT channel is requested.
7645  * Contains the new channel control profile map, if changed, and the new MCC
7656  * @channels: channel control data map, DWORD for each channel. Only the first
7681  * Contains the new channel control profile map, if changed, and the new MCC
7693  * @channels: channel control data map, DWORD for each channel. Only the first