dev/e1000/e1000_82571.c

108 	phy->ops.check_reset_block	= e1000_check_reset_block_generic;
109 	phy->ops.reset			= e1000_phy_hw_reset_generic;
110 	phy->ops.set_d0_lplu_state	= e1000_set_d0_lplu_state_82571;
111 	phy->ops.set_d3_lplu_state	= e1000_set_d3_lplu_state_generic;
112 	phy->ops.power_up		= e1000_power_up_phy_copper;
113 	phy->ops.power_down		= e1000_power_down_phy_copper_82571;
119 		phy->ops.get_cfg_done	= e1000_get_cfg_done_82571;
120 		phy->ops.get_info	= e1000_get_phy_info_igp;
121 		phy->ops.check_polarity	= e1000_check_polarity_igp;
122 		phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_igp;
123 		phy->ops.get_cable_length = e1000_get_cable_length_igp_2;
124 		phy->ops.read_reg	= e1000_read_phy_reg_igp;
125 		phy->ops.write_reg	= e1000_write_phy_reg_igp;
126 		phy->ops.acquire	= e1000_get_hw_semaphore;
127 		phy->ops.release	= e1000_put_hw_semaphore;
131 		phy->ops.get_cfg_done	= e1000_get_cfg_done_generic;
132 		phy->ops.get_info	= e1000_get_phy_info_m88;
133 		phy->ops.check_polarity	= e1000_check_polarity_m88;
134 		phy->ops.commit		= e1000_phy_sw_reset_generic;
135 		phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_m88;
136 		phy->ops.get_cable_length = e1000_get_cable_length_m88;
137 		phy->ops.read_reg	= e1000_read_phy_reg_m88;
138 		phy->ops.write_reg	= e1000_write_phy_reg_m88;
139 		phy->ops.acquire	= e1000_get_hw_semaphore;
140 		phy->ops.release	= e1000_put_hw_semaphore;
146 		phy->ops.get_cfg_done	= e1000_get_cfg_done_generic;
147 		phy->ops.get_info	= e1000_get_phy_info_m88;
148 		phy->ops.check_polarity	= e1000_check_polarity_m88;
149 		phy->ops.commit		= e1000_phy_sw_reset_generic;
150 		phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_m88;
151 		phy->ops.get_cable_length = e1000_get_cable_length_m88;
152 		phy->ops.read_reg	= e1000_read_phy_reg_bm2;
153 		phy->ops.write_reg	= e1000_write_phy_reg_bm2;
154 		phy->ops.acquire	= e1000_get_hw_semaphore_82574;
155 		phy->ops.release	= e1000_put_hw_semaphore_82574;
156 		phy->ops.set_d0_lplu_state = e1000_set_d0_lplu_state_82574;
157 		phy->ops.set_d3_lplu_state = e1000_set_d3_lplu_state_82574;
262 		nvm->ops.acquire = e1000_get_hw_semaphore_82574;
263 		nvm->ops.release = e1000_put_hw_semaphore_82574;
266 		nvm->ops.acquire = e1000_acquire_nvm_82571;
267 		nvm->ops.release = e1000_release_nvm_82571;
270 	nvm->ops.read = e1000_read_nvm_eerd;
271 	nvm->ops.update = e1000_update_nvm_checksum_82571;
272 	nvm->ops.validate = e1000_validate_nvm_checksum_82571;
273 	nvm->ops.valid_led_default = e1000_valid_led_default_82571;
274 	nvm->ops.write = e1000_write_nvm_82571;
298 		mac->ops.setup_physical_interface =
300 		mac->ops.check_for_link = e1000_check_for_fiber_link_generic;
301 		mac->ops.get_link_up_info =
309 		mac->ops.setup_physical_interface =
311 		mac->ops.check_for_link = e1000_check_for_serdes_link_82571;
312 		mac->ops.get_link_up_info =
317 		mac->ops.setup_physical_interface =
319 		mac->ops.check_for_link = e1000_check_for_copper_link_generic;
320 		mac->ops.get_link_up_info =
337 	mac->ops.get_bus_info = e1000_get_bus_info_pcie_generic;
339 	mac->ops.reset_hw = e1000_reset_hw_82571;
341 	mac->ops.init_hw = e1000_init_hw_82571;
343 	mac->ops.setup_link = e1000_setup_link_82571;
345 	mac->ops.update_mc_addr_list = e1000_update_mc_addr_list_generic;
347 	mac->ops.write_vfta = e1000_write_vfta_generic;
349 	mac->ops.clear_vfta = e1000_clear_vfta_82571;
351 	mac->ops.read_mac_addr = e1000_read_mac_addr_82571;
353 	mac->ops.id_led_init = e1000_id_led_init_generic;
355 	mac->ops.setup_led = e1000_setup_led_generic;
357 	mac->ops.cleanup_led = e1000_cleanup_led_generic;
359 	mac->ops.led_off = e1000_led_off_generic;
361 	mac->ops.clear_hw_cntrs = e1000_clear_hw_cntrs_82571;
366 		mac->ops.set_lan_id = e1000_set_lan_id_single_port;
367 		mac->ops.check_mng_mode = e1000_check_mng_mode_generic;
368 		mac->ops.led_on = e1000_led_on_generic;
369 		mac->ops.blink_led = e1000_blink_led_generic;
381 		mac->ops.set_lan_id = e1000_set_lan_id_single_port;
382 		mac->ops.check_mng_mode = e1000_check_mng_mode_82574;
383 		mac->ops.led_on = e1000_led_on_82574;
386 		mac->ops.check_mng_mode = e1000_check_mng_mode_generic;
387 		mac->ops.led_on = e1000_led_on_generic;
388 		mac->ops.blink_led = e1000_blink_led_generic;
449 	hw->mac.ops.init_params = e1000_init_mac_params_82571;
450 	hw->nvm.ops.init_params = e1000_init_nvm_params_82571;
451 	hw->phy.ops.init_params = e1000_init_phy_params_82571;
484 		ret_val = phy->ops.read_reg(hw, PHY_ID1, &phy_id);
490 		ret_val = phy->ops.read_reg(hw, PHY_ID2, &phy_id);
879 	if (!(phy->ops.read_reg))
882 	ret_val = phy->ops.read_reg(hw, IGP02E1000_PHY_POWER_MGMT, &data);
888 		ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT,
894 		ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
899 		ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
905 		ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT,
913 			ret_val = phy->ops.read_reg(hw,
920 			ret_val = phy->ops.write_reg(hw,
926 			ret_val = phy->ops.read_reg(hw,
933 			ret_val = phy->ops.write_reg(hw,
1082 	ret_val = mac->ops.id_led_init(hw);
1089 	mac->ops.clear_vfta(hw);
1106 	ret_val = mac->ops.setup_link(hw);
1340 	ret_val = hw->nvm.ops.read(hw, NVM_INIT_CONTROL2_REG, 1, &data);
1392 	ret_val = hw->phy.ops.read_reg(hw, E1000_RECEIVE_ERROR_COUNTER,
1397 		ret_val = hw->phy.ops.read_reg(hw, E1000_BASE1000T_STATUS,
1697 	ret_val = hw->nvm.ops.read(hw, NVM_ID_LED_SETTINGS, 1, data);
1760 		hw->mac.ops.rar_set(hw, hw->mac.addr,
1789 	ret_val = nvm->ops.read(hw, 0x10, 1, &data);
1801 		ret_val = nvm->ops.read(hw, 0x23, 1, &data);
1807 			ret_val = nvm->ops.write(hw, 0x23, 1, &data);
1810 			ret_val = nvm->ops.update(hw);
1855 	if (!phy->ops.check_reset_block)
1859 	if (!(mac->ops.check_mng_mode(hw) || phy->ops.check_reset_block(hw)))