Lines Matching refs:to
18 * contributors may be used to endorse or promote products derived
41 * Use to mark a command to apply to all namespaces,
42 * or to retrieve global log pages.
103 * to wait for the controller to become ready
104 * (CSTS.RDY set to '1') after a power-on or reset
106 uint32_t to : 8;
455 * Two bits for CAP.AMS (18:17) field are set to '1' when the controller
457 * set to 0x0 by default.
474 * Arbitration Mechanism Selected to the controller.
475 * Value 0x2 to 0x6 is reserved.
771 * Opcode transfers data from host to controller (e.g. Write).
776 * Opcode transfers data from controller to host (e.g. Read).
791 * which direction (host to controller or controller to host) it is
942 * that are attached to CDW1.NSID.
1441 * End-to-end data protection capabilities.
1471 * End-to-end data protection type settings.
1836 * Discovery(refer to the NVMe over Fabrics specification).
2076 * requested to be activated immediately without reset.
2090 * to use for the operation if the value specified is 0h.