Copy stable/10@r272459 to releng/10.1 as part of
the 10.1-RELEASE process.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

MFC changes related to PR kern/189089. Unlike CURRENT, stable/10 does not
panic when you attempt to remove the IP address. But it still fails to
remove the address.

MFC r265094

Add regression test for PR kern/189088.

MFC r265092

Fix a panic when removing an IP address from an interface, if the same
address exists on another interface. The panic was introduced by change
264887, which changed the fibnum parameter in the call to rtalloc1_fib() in
ifa_switch_loopback_route() from RT_DEFAULT_FIB to RT_ALL_FIBS. The
solution is to use the interface fib in that call. For the majority of
users, that will be equivalent to the legacy behavior.

MFC r264887

Fix host and network routes for new interfaces when net.add_addr_allfibs=0

sys/net/route.c
In rtinit1, use the interface fib instead of the process fib. The
latter wasn't very useful because ifconfig(8) is usually invoked
with the default process fib. Changing ifconfig(8) to use setfib(2)
would be redundant, because it already sets the interface fib.

tests/sys/netinet/fibs_test.sh
Clear the expected ATF failure

sys/net/if.c
Pass the interface fib in calls to rtrequest1_fib and rtalloc1_fib

sys/netinet/in.c
sys/net/if_var.h
Add a fibnum argument to ifa_switch_loopback_route, a subroutine of
in_scrubprefix. Pass it the interface fib.

MFC changes relating to running multiple interfaces on different fibs but
with addresses on the same subnet.

MFC r266860

Fix unintended KBI change from r264905. Add _fib versions of
ifa_ifwithnet() and ifa_ifwithdstaddr() The legacy functions will call the
_fib() versions with RT_ALL_FIBS, preserving legacy behavior.

sys/net/if_var.h
sys/net/if.c
Add legacy-compatible functions as described above. Ensure legacy
behavior when RT_ALL_FIBS is passed as fibnum.

sys/netinet/in_pcb.c
sys/netinet/ip_output.c
sys/netinet/ip_options.c
sys/net/route.c
sys/net/rtsock.c
sys/netinet6/nd6.c
Call with _fib() functions if we must use a specific fib, or the
legacy functions otherwise.

tests/sys/netinet/fibs_test.sh
tests/sys/netinet/udp_dontroute.c
Improve the udp_dontroute test. The bug that this test exercises is
that ifa_ifwithnet() will return the wrong address, if multiple
interfaces have addresses on the same subnet but with different
fibs. The previous version of the test only considered one possible
failure mode: that ifa_ifwithnet_fib() might fail to find any
suitable address at all. The new version also checks whether
ifa_ifwithnet_fib() finds the correct address by checking where the
ARP request goes.

MFC r264917

Style fixes, mostly trailing whitespace elimination. No functional change.

MFC r264905

Fix subnet and default routes on different FIBs on the same subnet.

These two bugs are closely related. The root cause is that ifa_ifwithnet
does not consider FIBs when searching for an interface address.

sys/net/if_var.h
sys/net/if.c
Add a fib argument to ifa_ifwithnet and ifa_ifwithdstadddr. Those
functions will only return an address whose interface fib equals the
argument.

sys/net/route.c
Update calls to ifa_ifwithnet and ifa_ifwithdstaddr with fib
arguments.

sys/netinet/in.c
Update in_addprefix to consider the interface fib when adding
prefixes. This will prevent it from not adding a subnet route when
one already exists on a different fib.

sys/net/rtsock.c
sys/netinet/in_pcb.c
sys/netinet/ip_output.c
sys/netinet/ip_options.c
sys/netinet6/nd6.c
Add RT_DEFAULT_FIB arguments to ifa_ifwithdstaddr and ifa_ifwithnet.
In some cases it there wasn't a clear specific fib number to use.
In others, I was unable to test those functions so I chose
RT_DEFAULT_FIB to minimize divergence from current behavior. I will
fix some of the latter changes along with PR kern/187553.

tests/sys/netinet/fibs_test.sh
tests/sys/netinet/udp_dontroute.c
tests/sys/netinet/Makefile
Revert r263738. The udp_dontroute test was right all along.
However, bugs kern/187550 and kern/187553 cancelled each other out
when it came to this test. Because of kern/187553, ifa_ifwithnet
searched the default fib instead of the requested one, but because
of kern/187550, there was an applicable subnet route on the default
fib. The new test added in r263738 doesn't work right, however. I
can verify with dtrace that ifa_ifwithnet returned the wrong address
before I applied this commit, but route(8) miraculously found the
correct interface to use anyway. I don't know how.

Clear expected failure messages for kern/187550 and kern/187552.

MFC r263738

tests/sys/netinet/Makefile
tests/sys/netinet/fibs.sh
Replace fibs:udp_dontroute with fibs:src_addr_selection_by_subnet.
The original test was poorly written; it was actually testing
kern/167947 instead of the desired kern/187553. The root cause of the
bug is that ifa_ifwithnet did not have a fib argument. The new test
more directly targets that behavior.

tests/sys/netinet/udp_dontroute.c
Delete the auxilliary binary used by the old test

MFC r263779

Correct ARP update handling when the routes for network interfaces are
restricted to a single FIB in a multifib system.

Restricting an interface's routes to the FIB to which it is assigned (by
setting net.add_addr_allfibs=0) causes ARP updates to fail with "arpresolve:
can't allocate llinfo for x.x.x.x". This is due to the ARP update code hard
coding it's lookup for existing routing entries to FIB 0.

sys/netinet/in.c:
When dealing with RTM_ADD (add route) requests for an interface, use
the interface's assigned FIB instead of the default (FIB 0).

sys/netinet/if_ether.c:
In arpresolve(), enhance error message generated when an
lla_lookup() fails so that the interface causing the error is
visible in logs.

tests/sys/netinet/fibs_test.sh
Clear ATF expected error.

MFC r263445 and r265385. Note that the change to ObsoleteFiles.inc in
r265385 does not need to be MFCed, because the obsolete files in question
were never MFCed to any stable branch.

r265385
Remove the ifconfig test added in rev 263445. After discussion with
melifaro, we agreed that ifconfig's behavior was not a bug. The main
motivation for bin/187551 was to partially resolve kern/187549, but we
resolved kern/187549 in a different way instead.

ObsoleteFiles.inc
etc/mtree/BSD.tests.dist
sbin/ifconfig/tests/fibs_test.sh
sbin/ifconfig/tests/Makefile
sbin/ifconfig/Makefile
Remove /usr/tests/sbin/ifconfig

r263445
Add several ATF tests that deal with multiple fibs. They're described in
several different PRs, but the tests share some common code, so I'm
committing them together.

sbin/ifconfig/tests
sbin/ifconfig/tests/fibs_test.sh
sbin/ifconfig/tests/Makefile
sbin/ifconfig/Makefile
Add fibs_test.sh, which regresses bin/187551

tests/sys/netinet
tests/sys/netinet/fibs_test.sh
tests/sys/netinet/udp_dontroute.c
tests/sys/netinet/Makefile
tests/sys/Makefile
Add fibs_test.sh, which regresses kern/167947, kern/187552
kern/187549, kern/187550, and kern/187553

etc/mtree/BSD.tests.dist
Add newly created directories

Add several ATF tests that deal with multiple fibs. They're described in
several different PRs, but the tests share some common code, so I'm
committing them together.

sbin/ifconfig/tests
sbin/ifconfig/tests/fibs_test.sh
sbin/ifconfig/tests/Makefile
sbin/ifconfig/Makefile
Add fibs_test.sh, which regresses bin/187551

tests/sys/netinet
tests/sys/netinet/fibs_test.sh
tests/sys/netinet/udp_dontroute.c
tests/sys/netinet/Makefile
tests/sys/Makefile
Add fibs_test.sh, which regresses kern/167947, kern/187552
kern/187549, kern/187550, and kern/187553

etc/mtree/BSD.tests.dist
Add newly created directories

PR: bin/187551
PR: kern/167947
PR: kern/187552
PR: kern/187549
PR: kern/187550
PR: kern/187553
Discussed with: melifaro
MFC after: 3 weeks
Sponsored by: Spectra Logic Corporation