Copy stable/10@r272459 to releng/10.1 as part of
the 10.1-RELEASE process.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

MFC changes related to PR kern/189089. Unlike CURRENT, stable/10 does not
panic when you attempt to remove the IP address. But it still fails to
remove the address.

MFC r265094

Add regression test for PR kern/189088.

MFC r265092

Fix a panic when removing an IP address from an interface, if the same
address exists on another interface. The panic was introduced by change
264887, which changed the fibnum parameter in the call to rtalloc1_fib() in
ifa_switch_loopback_route() from RT_DEFAULT_FIB to RT_ALL_FIBS. The
solution is to use the interface fib in that call. For the majority of
users, that will be equivalent to the legacy behavior.

MFC r264887

Fix host and network routes for new interfaces when net.add_addr_allfibs=0

sys/net/route.c
In rtinit1, use the interface fib instead of the process fib. The
latter wasn't very useful because ifconfig(8) is usually invoked
with the default process fib. Changing ifconfig(8) to use setfib(2)
would be redundant, because it already sets the interface fib.

tests/sys/netinet/fibs_test.sh
Clear the expected ATF failure

sys/net/if.c
Pass the interface fib in calls to rtrequest1_fib and rtalloc1_fib

sys/netinet/in.c
sys/net/if_var.h
Add a fibnum argument to ifa_switch_loopback_route, a subroutine of
in_scrubprefix. Pass it the interface fib.

MFC changes relating to running multiple interfaces on different fibs but
with addresses on the same subnet.

MFC r266860

Fix unintended KBI change from r264905. Add _fib versions of
ifa_ifwithnet() and ifa_ifwithdstaddr() The legacy functions will call the
_fib() versions with RT_ALL_FIBS, preserving legacy behavior.

sys/net/if_var.h
sys/net/if.c
Add legacy-compatible functions as described above. Ensure legacy
behavior when RT_ALL_FIBS is passed as fibnum.

sys/netinet/in_pcb.c
sys/netinet/ip_output.c
sys/netinet/ip_options.c
sys/net/route.c
sys/net/rtsock.c
sys/netinet6/nd6.c
Call with _fib() functions if we must use a specific fib, or the
legacy functions otherwise.

tests/sys/netinet/fibs_test.sh
tests/sys/netinet/udp_dontroute.c
Improve the udp_dontroute test. The bug that this test exercises is
that ifa_ifwithnet() will return the wrong address, if multiple
interfaces have addresses on the same subnet but with different
fibs. The previous version of the test only considered one possible
failure mode: that ifa_ifwithnet_fib() might fail to find any
suitable address at all. The new version also checks whether
ifa_ifwithnet_fib() finds the correct address by checking where the
ARP request goes.

MFC r264917

Style fixes, mostly trailing whitespace elimination. No functional change.

MFC r264905

Fix subnet and default routes on different FIBs on the same subnet.

These two bugs are closely related. The root cause is that ifa_ifwithnet
does not consider FIBs when searching for an interface address.

sys/net/if_var.h
sys/net/if.c
Add a fib argument to ifa_ifwithnet and ifa_ifwithdstadddr. Those
functions will only return an address whose interface fib equals the
argument.

sys/net/route.c
Update calls to ifa_ifwithnet and ifa_ifwithdstaddr with fib
arguments.

sys/netinet/in.c
Update in_addprefix to consider the interface fib when adding
prefixes. This will prevent it from not adding a subnet route when
one already exists on a different fib.

sys/net/rtsock.c
sys/netinet/in_pcb.c
sys/netinet/ip_output.c
sys/netinet/ip_options.c
sys/netinet6/nd6.c
Add RT_DEFAULT_FIB arguments to ifa_ifwithdstaddr and ifa_ifwithnet.
In some cases it there wasn't a clear specific fib number to use.
In others, I was unable to test those functions so I chose
RT_DEFAULT_FIB to minimize divergence from current behavior. I will
fix some of the latter changes along with PR kern/187553.

tests/sys/netinet/fibs_test.sh
tests/sys/netinet/udp_dontroute.c
tests/sys/netinet/Makefile
Revert r263738. The udp_dontroute test was right all along.
However, bugs kern/187550 and kern/187553 cancelled each other out
when it came to this test. Because of kern/187553, ifa_ifwithnet
searched the default fib instead of the requested one, but because
of kern/187550, there was an applicable subnet route on the default
fib. The new test added in r263738 doesn't work right, however. I
can verify with dtrace that ifa_ifwithnet returned the wrong address
before I applied this commit, but route(8) miraculously found the
correct interface to use anyway. I don't know how.

Clear expected failure messages for kern/187550 and kern/187552.

MFC r263738

tests/sys/netinet/Makefile
tests/sys/netinet/fibs.sh
Replace fibs:udp_dontroute with fibs:src_addr_selection_by_subnet.
The original test was poorly written; it was actually testing
kern/167947 instead of the desired kern/187553. The root cause of the
bug is that ifa_ifwithnet did not have a fib argument. The new test
more directly targets that behavior.

tests/sys/netinet/udp_dontroute.c
Delete the auxilliary binary used by the old test

MFC r263779

Correct ARP update handling when the routes for network interfaces are
restricted to a single FIB in a multifib system.

Restricting an interface's routes to the FIB to which it is assigned (by
setting net.add_addr_allfibs=0) causes ARP updates to fail with "arpresolve:
can't allocate llinfo for x.x.x.x". This is due to the ARP update code hard
coding it's lookup for existing routing entries to FIB 0.

sys/netinet/in.c:
When dealing with RTM_ADD (add route) requests for an interface, use
the interface's assigned FIB instead of the default (FIB 0).

sys/netinet/if_ether.c:
In arpresolve(), enhance error message generated when an
lla_lookup() fails so that the interface causing the error is
visible in logs.

tests/sys/netinet/fibs_test.sh
Clear ATF expected error.

MFC r263445 and r265385. Note that the change to ObsoleteFiles.inc in
r265385 does not need to be MFCed, because the obsolete files in question
were never MFCed to any stable branch.

r265385
Remove the ifconfig test added in rev 263445. After discussion with
melifaro, we agreed that ifconfig's behavior was not a bug. The main
motivation for bin/187551 was to partially resolve kern/187549, but we
resolved kern/187549 in a different way instead.

ObsoleteFiles.inc
etc/mtree/BSD.tests.dist
sbin/ifconfig/tests/fibs_test.sh
sbin/ifconfig/tests/Makefile
sbin/ifconfig/Makefile
Remove /usr/tests/sbin/ifconfig

r263445
Add several ATF tests that deal with multiple fibs. They're described in
several different PRs, but the tests share some common code, so I'm
committing them together.

sbin/ifconfig/tests
sbin/ifconfig/tests/fibs_test.sh
sbin/ifconfig/tests/Makefile
sbin/ifconfig/Makefile
Add fibs_test.sh, which regresses bin/187551

tests/sys/netinet
tests/sys/netinet/fibs_test.sh
tests/sys/netinet/udp_dontroute.c
tests/sys/netinet/Makefile
tests/sys/Makefile
Add fibs_test.sh, which regresses kern/167947, kern/187552
kern/187549, kern/187550, and kern/187553

etc/mtree/BSD.tests.dist
Add newly created directories

MFC r264133: Fix variable type to avoid printf formatter warning.

MFC refactoring of the *.test.mk files.

- r263161 Make bsd.test.mk the only public mk fragment for the building of tests.
- r263172 Move FreeBSD Test Suite-specific code to a suite.test.mk file.
- r263204 Add some documentation for bsd.test.mk.
- r263217 Document support for TAP-compliant Perl test programs.

This is "make tinderbox" clean.

MFC r263116

Replace 4.4BSD Lite's unix domain socket backpressure hack with a cleaner
mechanism, based on the new SB_STOP sockbuf flag. The old hack dynamically
changed the sending sockbuf's high water mark whenever adding or removing
data from the receiving sockbuf. It worked for stream sockets, but it never
worked for SOCK_SEQPACKET sockets because of their atomic nature. If the
sockbuf was partially full, it might return EMSGSIZE instead of blocking.

The new solution is based on DragonFlyBSD's fix from commit
3a6117bbe0ed6a87605c1e43e12a1438d8844380 on 2008-05-27. It adds an SB_STOP
flag to sockbufs. Whenever uipc_send surpasses the socket's size limit, it
sets SB_STOP on the sending sockbuf. sbspace() will then return 0 for that
sockbuf, causing sosend_generic and friends to block. uipc_rcvd will
likewise clear SB_STOP. There are two fringe benefits: uipc_{send,rcvd} no
longer need to call chgsbsize() on every send and receive because they don't
change the sockbuf's high water mark. Also, uipc_sense no longer needs to
acquire the UIPC linkage lock, because it's simpler to compute the
st_blksizes.

There is one drawback: since sbspace() will only ever return 0 or the
maximum, sosend_generic will allow the sockbuf to exceed its nominal maximum
size by at most one packet of size less than the max. I don't think that's
a serious problem. In fact, I'm not even positive that FreeBSD guarantees a
socket will always stay within its nominal size limit.

sys/sys/sockbuf.h
Add the SB_STOP flag and adjust sbspace()

sys/sys/unpcb.h
Delete the obsolete unp_cc and unp_mbcnt fields from struct unpcb.

sys/kern/uipc_usrreq.c
Adjust uipc_rcvd, uipc_send, and uipc_sense to use the SB_STOP
backpressure mechanism. Removing obsolete unpcb fields from
db_show_unpcb.

tests/sys/kern/unix_seqpacket_test.c
Clear expected failures from ATF.

MFC r262867

Fix PR kern/185813 "SOCK_SEQPACKET AF_UNIX sockets with asymmetrical buffers
drop packets". It was caused by a check for the space available in a
sockbuf, but it was checking the wrong sockbuf.

sys/sys/sockbuf.h
sys/kern/uipc_sockbuf.c
Add sbappendaddr_nospacecheck_locked(), which is just like
sbappendaddr_locked but doesn't validate the receiving socket's space.
Factor out common code into sbappendaddr_locked_internal(). We
shouldn't simply make sbappendaddr_locked check the space and then call
sbappendaddr_nospacecheck_locked, because that would cause the O(n)
function m_length to be called twice.

sys/kern/uipc_usrreq.c
Use sbappendaddr_nospacecheck_locked for SOCK_SEQPACKET sockets,
because the receiving sockbuf's size limit is irrelevant.

tests/sys/kern/unix_seqpacket_test.c
Now that 185813 is fixed, pipe_128k_8k fails intermittently due to
185812. Make it fail every time by adding a usleep after starting the
writer thread and before starting the reader thread in test_pipe. That
gives the writer time to fill up its send buffer. Also, clear the
expected failure message due to 185813. It actually said "185812", but
that was a typo.

PR: kern/185813

MFC r262868

Only use -lpthread for unix_seqpacket_test, not for all test programs.

MFC r262894

kern/Makefile
Set WARNS=5 for all files in this directory
kern/unix_seqpacket_test.c
Fix compiler warnings. Most were benign, but rcvbuf_oversized
wasn't working as intended because I forgot to set the buffer sizes.

MFC r262133

test_eagain_*_* should've been using nonblocking sockets instead of blocking
sockets. The error was not exposed as long as the kernel suffered from PR
kern/185812. Now corrected, these tests pass on DragonFlyBSD 3.6.0.

Install a symlink from /usr/tests/local to /usr/local/tests.

This is a MFC of r261959 and r261978.

MFC r261081, r261133, and r261615

r261081
Replace the old unix_seqpacket and unix_seqpacket_exercise
tests, which were a little broken and not automatable, with
unix_seqpacket_test. It's coverage is a superset of the old
tests and it uses ATF. It includes test cases for bugs
kern/185813 and kern/185812.

r261133
Fix the Makefiles so that the tests I submitted in r261081 will
actually get built.

r261615
tests/sys/Makefile
use TESTS_SUBDIRS for kern instead of SUBDIRS. I don't
think it makes a difference in this case, but
TESTS_SUBDIRS is generally correct for subdirectories
that contain tests.

Set up the /usr/tests hierarchy.

This is a MFC of the following into stable/10:
- r257097 Set up the /usr/tests hierarchy.
- r257098 Add missing WITHOUTTESTS file.
- r257100 Add a tests(7) manual page.
- r257105 Disable WITHTESTS= for now.
- r257848 Fix buildworld when WITHTESTS is enabled.
- r257850 Subsume the functionality of MKATF into MKTESTS.
- r257851 Handle the removal of the test suite when WITHOUTTESTS=yes.
- r257852 Install category Kyuafiles from their category directories.
- r258232 Install BSD.tests.mtree when MKTESTS is yes.

Note that building with WITH_TESTS is still broken at this point (and
hence why WITHOUT_TESTS is the set as the default). Subsequent pullups
will fix the remaining issues.

Set up the /usr/tests hierarchy.

Populate /usr/tests with the only test programs that currently live
in the tree (those in lib/libcrypt/tests/) and add all the build
machinery to accompany this change.

In particular:

- Add a WITHOUT_TESTS variable that users can define to request that
no tests be put in /usr/tests.
- Add a top-level Kyuafile for /usr/tests and a way to create similar
Kyuafiles in top-level subdirectories.
- Add a BSD.tests.dist file to define the directory layout of
/usr/tests.

Submitted by: Julio Merino jmmv google.com
Reviewed by: sjg
MFC after: 2 weeks