Copy stable/10@r272459 to releng/10.1 as part of
the 10.1-RELEASE process.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

MFC 265099, 265148, 265690:

Add SMP support for Zedboard.

Use edge-triggered interrupts rather than polling loops to avoid missing
transitions of the INIT_B line. Also, release the mutex during uiomove().

Convert the Zynq SoC support to the new routines for static device mapping.

MFC 262952, 262958, 262966, 262979, 262980, 262986, 262987, 262995, 262997,
263030, 263033, 263034, 263056, 263057,

Remove all the redundant external declarations of exception vectors and
runtime setting of the pointers that's scattered around various places.

Remove all traces of support for ARM chips prior to the arm9 series.

Make the default exception handler vectors point to where I thought they
were already pointing: the default handlers (not a panic that says there
is no default handler).

Eliminate irq_dispatch.S. Move the data items it contained into
arm/intr.c and the functionality it provided into arm/exception.S.

Move the exception vector table (so-called "page0" data) into exception.S
and eliminate vectors.S.

Change the way the asm GET_CURTHREAD_PTR() macro is defined so that code
using it doesn't have to have an "AST_LOCALS" macro somewhere in the file.

Arrange for arm fork_trampoline() to return to userland via the standard
swi_exit code in exception.S instead of having its own inline expansion
of the DO_AST and PULLFRAME macros.

Now that the PUSHFRAME and PULLFRAME macros are used only in the swi
entry/exit code, they don't need to be macros. Except that didn't work
and the whole change was reverted.

Remove some unnecessary indirection and jump right to the handler functions.

Use panic rather than printf to "handle" an arm26 address exception
(should never happen on arm32).

Remove the unreferenced DATA() macro.

Remove #include <machine/asmacros.h> from files that don't need it.

MFC r261410

Follow r261352 by updating all drivers which are children of simplebus
to check the status property in their probe routines.

MFC r261252, r261279, r261304, r261305, r261322, r261336, r261337, r261338,
r261353

Fix the name of the dts file for the HL201...

When mapping an address, the bsh needs the same offset we do for other things.

Add explicit depends on bus_if.h and device_if.h to avoid a
chicken and egg problem in some compilation environments.

Switch to using PAs rather than VAs for the addresses we map for
devices. This is a nop, except for what's reported by atmelbus for the
resources.

Comment cleanups. Move things around for diff reduction against FDT work.

MFC r257738, r259202, r258410, r260288, r260292, r260294, r260320, r260323,
r260326, r260327, r260331, r260333, r260340, r260371, r260372, r260373,
r260374, r260375

Add common bus_space tag definition shared for most supported ARMv6/v7 SoCs.
Correct license statements to reflect the fact that these files were all
derived from sys/arm/mv/bus_space.c.

In pmap_unmapdev(), remember the size, and use that as an argument to
kva_free(), or we'd end up always passing it a size of 0

In pmap_mapdev(), first check whether a static mapping exists,

Convert TI static device mapping to use the new arm_devmap_add_entry(),

Use the common armv6 fdt_bus_tag defintion for tegra instead of a local copy.

Eliminate use of fdt_immr_addr(), it's not needed for tegra

Convert lpc from using fdt_immr style to arm_devmap_add_entry() to make
static device mappings.

Retire machine/fdt.h as a header used by MI code, as its function is now
obsolete. This involves the following pieces:
- Remove it entirely on PowerPC, where it is not used by MD code either
- Remove all references to machine/fdt.h in non-architecture-specific code
(aside from uart_cpu_fdt.c, shared by ARM and MIPS, and so is somewhat
non-arch-specific).
- Fix code relying on header pollution from machine/fdt.h includes
- Legacy fdtbus.c (still used on x86 FDT systems) now passes resource
requests to its parent (nexus). This allows x86 FDT devices to allocate
both memory and IO requests and removes the last notionally MI use of
fdtbus_bs_tag.
- On those architectures that retain a machine/fdt.h, unused bits like
FDT_MAP_IRQ and FDT_INTR_MAX have been removed.

Add #include <machine/fdt.h> to a few files that used to get it via pollution

Enable the mv cesa security/crypto device by providing the required property
in the dts source, and adding the right devices to the kernel config.

Remove dev/fdt/fdt_pci.c, which was code specific to Marvell ARM SoCs,
related to setting up static device mappings. Since it was only used by
arm/mv/mv_pci.c, it's now just static functions within that file, plus
one public function that gets called only from arm/mv/mv_machdep.c.

Switch RPi to using arm_devmap_add_entry() to set up static device mapping.

Allow 'no static device mappings' to potentially work.

Don't try to find a static mapping before calling pmap_mapdev(), that logic
is now part of pmap_mapdev() and doesn't need to be duplicated here.

Switch a10 to using arm_devmap_add_entry() to set up static device mapping.

MFC: r260889, r260890, r260911:

r260911 | imp | 2014-01-20 10:45:36 -0700 (Mon, 20 Jan 2014) | 5 lines

Don't lock in the generic grab just to lock again in the specific grabs.

r260890 | imp | 2014-01-19 12:39:13 -0700 (Sun, 19 Jan 2014) | 11 lines

Introduce grab and ungrab upcalls. When the kernel desires to grab the
console, it calls the grab functions. These functions should turn off
the RX interrupts, and any others that interfere. This makes mountroot
prompt work again. If there's more generalized need other than
prompting, many of these routines should be expanded to do those new
things.

Reviewed by: bde (with reservations)

MFC r257669, r257672, r257673, r257676, r257678:

Call initarm_lastaddr() later in the init sequence, after establishing
static device mappings, rather than as the first of the initializations
that a platform can hook into. This allows a platform to allocate KVA
from the top of the address space downwards for things like static device
mapping, and return the final "last usable address" result after that and
other early init work is done.

Because some platforms were doing work in initarm_lastaddr() that needs to
be done early, add a new initarm_early_init() routine and move the early
init code to that routine on those platforms.

Make PTE_DEVICE a synonym for PTE_NOCACHE on armv4, to make it easier to
share the same code on both architectures.

Add new helper routines for arm static device mapping. The new code
allocates kva space from the top down for the device mappings and builds
entries in an internal table which is automatically used later by
arm_devmap_bootstrap(). The platform code just calls the new
arm_devmap_add_entry() function as many times as it needs to (up to 32
entries allowed; most platforms use 2 or 3 at most).

Remove imx local devmap code and use the essentially identical common
code that got moved from imx_machdep.c to arm/devmap.c.

MFC r257648, r257649, r257660:

Begin reducing code duplication in arm pmap.c and pmap-v6.c by factoring
out common code related to mapping device memory into a new devmap.c file.

Remove the growing duplication of code that used pmap_devmap_find_pa() and
then did some math with the returned results to generate a virtual address,
and likewise in reverse to get a physical address. Now there are a pair
of functions, arm_devmap_vtop() and arm_devmap_ptov(), to do that. The
bus_space_map() implementations are rewritten in terms of these.

Move remaining code and data related to static device mapping into the
new devmap.[ch] files. Emphasize the MD nature of these things by using
the prefix arm_devmap_ on the function and type names (already a few of
these things found their way into MI code, hopefully it will be harder to
do by accident in the future).

MFC r257201, r257202

Retire arm_remap_nocache() and the data and constants associated with it.

MFC r257199, r257200, r257217:

Remove all #include <machine/pmap.h> from arm code. It's already
included by vm/pmap.h, which is a prerequisite for arm/machine/pmap.h
so there's no reason to ever include it directly.

Remove #include <machine/frame.h> from all the arm code that doesn't
really need it. That would be almost everywhere it was included. Add
it in a couple files that really do need it and were previously getting
it by accident via another header.

Remove the last dregs of trapframe_t. It turns out only arm was using
this type, so remove it to make arm code more consistant with other
platforms.

Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Bring copyright changes with the agreement of Thomas Skibo.

Communication on src-commiters, Sat, 27 Apr 2013 22:09:06 -0700,
Subject was: "Re: svn commit: r249997"

As I'm here, fix the style main block comments in files' headers.

Add Xilinx Zynq ARM/FPGA SoC support to FreeBSD/arm port.

Submitted by: Thomas Skibo <ThomasSkibo (at) sbcglobal.net>
Reviewed by: wkoszek, freebsd-arm@ (no objections raised)