- Copy stable/10 (r259064) to releng/10.0 as part of the
10.0-RELEASE cycle.
- Update __FreeBSD_version [1]
- Set branch name to -RC1

[1] 10.0-CURRENT __FreeBSD_version value ended at '55', so
start releng/10.0 at '100' so the branch is started with
a value ending in zero.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Consistently set RPCGEN_CPP when running rpcgen, so the C preprocessor
set via ${CPP} is used, instead of always using hardcoded /usr/bin/cpp.

MFC after: 1 week

The last big commit: let usr.sbin/ use WARNS=6 by default.

Remove unused variables.

Remove unsafe use of asynchronous I/O (the SIGIO handler could cause
incorrect reentrant calls to the libc memory manager).

Add missing error handling:
* for an incoming response with an incorrect tid;
* for a failure to register the response RPC program,

Fix error handling for failure to malloc job descriptor (this needs to
be done before the transient RPC program is registered).

PR: bin/102143
MFC after: 2 weeks

Don't push a map on a master server which will fail anyway.

PR: bin/72881
Submitted by: thomas (slightly coloured by me)

(handler): When exitting upon an abnormal signal, yppush_exit() should not
attempt to clear its pending jobs list, as this could trigger another
signal, and cause an infinite recursion. What yppush_exit() tests
in order to determine whether to flush pending jobs is the
yppush_joblist chained list, so this is what needs to be cleared
in that case (not the yppush_jobs counter).

Reviewed by: audit@ (no objection)
MFC after: 2 weeks

Sort sections.

Remove definition of struct dom_binding, it's non-standard C code and
unnecessary since src/include/rpcsvc/ypclnt.h's revision 1.10.

Per letter dated July 22, 1999 remove 3rd clause of Berkeley derived software
(with permission of addtional copyright holders where appropriate)

Mechanically kill hard sentence breaks.

Use __FBSDID over rcsid[]. Protect copyright[] where needed.

The .Nm utility

Spell void * as void * rather than caddr_t. This is complicated by the
fact that caddr_t is often misspelled as char *.

Sponsored by: DARPA, NAI Labs

Constify and stylify yppusherr_string().

ANSIfy and remove some dead code.

Sponsored by: DARPA, NAI Labs

Apply the following mechanical transformations in preparation for
ansification and constification:

s{\s+__P\((\(.*?\))\)}{$1}g;
s{\(\s+}{\(}g;
s{\s+\)}{\)}g;
s{\s+,}{,}g;
s{(\s+)(for|if|switch|while)\(}{$1$2 \(}g;
s{return ([^\(].*?);}{return ($1);}g;
s{([\w\)])([!=+/\*-]?=)([\w\(+-])}{$1 $2 $3}g;
s{\s+$}{\n};g

Also add $FreeBSD$ where needed.

MFC after: 1 week

yp(4) -> yp(8).

PR: docs/30797

Perform a major cleanup of the usr.sbin Makefiles.
These are not perfectly in agreement with each other style-wise, but they
are orders of orders of magnitude more consistent style-wise than before.

Initialize the sa_flags member of an auto struct sigaction variable.
It contained whatever garbage happened to be on the stack.

PR: bin/27457 (not confirmed yet, but almost certain)
MFC after: 1 day

- Backout botched attempt to introduce MANSECT feature.
- MAN[1-9] -> MAN.

Set the default manual section for usr.sbin/ to 8.

Bring in a hybrid of SunSoft's transport-independent RPC (TI-RPC) and
associated changes that had to happen to make this possible as well as
bugs fixed along the way.

Bring in required TLI library routines to support this.

Since we don't support TLI we've essentially copied what NetBSD
has done, adding a thin layer to emulate direct the TLI calls
into BSD socket calls.

This is mostly from Sun's tirpc release that was made in 1994,
however some fixes were backported from the 1999 release (supposedly
only made available after this porting effort was underway).

The submitter has agreed to continue on and bring us up to the
1999 release.

Several key features are introduced with this update:
Client calls are thread safe. (1999 code has server side thread
safe)
Updated, a more modern interface.

Many userland updates were done to bring the code up to par with
the recent RPC API.

There is an update to the pthreads library, a function
pthread_main_np() was added to emulate a function of Sun's threads
library.

While we're at it, bring in NetBSD's lockd, it's been far too
long of a wait.

New rpcbind(8) replaces portmap(8) (supporting communication over
an authenticated Unix-domain socket, and by default only allowing
set and unset requests over that channel). It's much more secure
than the old portmapper.

Umount(8), mountd(8), mount_nfs(8), nfsd(8) have also been upgraded
to support TI-RPC and to support IPV6.

Umount(8) is also fixed to unmount pathnames longer than 80 chars,
which are currently truncated by the Kernel statfs structure.

Submitted by: Martin Blapp <mb@imp.ch>
Manpage review: ru
Secure RPC implemented by: wpaul

mdoc(7) police: use the new features of the Nm macro.

Remove single-space hard sentence breaks. These degrade the quality
of the typeset output, tend to make diffs harder to read and provide
bad examples for new-comers to mdoc.

Remove invalid section name. Add missing .El.

Fix various man pages to stop abusing the .Bx macro to generate
the string "FreeBSD". Use the .Fx macro instead.

$Id$ -> $FreeBSD$

Don't assume that time_t is long.

Fixed missing dependencies on headers generated by rpcgen, as usual.
Removed bogus dependencies of generated .c files on generated headers.
Sorted sources lists.

.Sh AUTHOR -> .Sh AUTHORS. Use .An/.Aq.

Cosmetics in yp_error() and usage().

compare return value from getopt against -1 rather than EOF, per the final
posix standard on the topic.

Revert $FreeBSD$ to $Id$

Make the long-awaited change from $Id$ to $FreeBSD$

This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore. This update would have been
insane otherwise.

Ack! You can't strdup() a DB datum that is not null terminated, or you
get seemingly random SEGV's...

Fix embarassing mind-o: transient RPC program numbers run from
0x40000000 to 0x5FFFFFFF, not 0x4000000 to 0x5FFFFFF. *sigh*

yppush_main.c:

- Remove unused 'pid' member from the jobs structure. (This was left over
from an earlier incarnation of the program that used multiple processes.)

- Remove #ifdef'ed longjmp() stuff.

- Print warning message if the 'pushing' host is not the master for
a map being pushed but don't bail out. (While yppush should only
be used on an NIS master, using it elsewhere is not an unpardonable sin.)

yppush.8:

- Fix a couple of mind-os.

Makefile

- Change format to hopefully ease bootstrapping. (Suggested by wollman.)
Other Makefiles should follow.

Correct a bunch of man page cross references and generally
try and silence "manck".

ncurses, rpc, and some of the gnu stuff are still a big mess, however.

Sync with my sources at home:

- Don't do longjmp()s from inside a signal handler. Even though I got
things to work the way I wanted, it's bad karma.

- Remember to clear the sa_mask with sigemptyset() before masking signals
when using sigaction() to set up the SIGIO handler.

- Break out of the wait loop in yppush_exit() when the five minute
timeout expires instead of looping around for another pass. If ypxfr
on the other end fails somehow and never sends a response, we don't
want to wait around forever.

Fix a bunch of spelling errors in a bunch of man pages.

This commit was generated by cvs2svn to compensate for changes in r13394,
which included commits to RCS files with non-trunk default branches.