- Copy stable/10 (r259064) to releng/10.0 as part of the
10.0-RELEASE cycle.
- Update __FreeBSD_version [1]
- Set branch name to -RC1

[1] 10.0-CURRENT __FreeBSD_version value ended at '55', so
start releng/10.0 at '100' so the branch is started with
a value ending in zero.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

In usr.bin/mt/mt.c, the c_code member of struct commands should really
be an unsigned long, since it will contain values of ioctl request
codes. On 64-bit arches, these will not fit into an int.

MFC after: 1 week

Add missing static keywords to mt(1)

Remove the advertising clause from UCB copyrighted files in usr.bin. This
is in accordance with the information provided at
ftp://ftp.cs.berkeley.edu/pub/4bsd/README.Impt.License.Change

Also add $FreeBSD$ to a few files to keep svn happy.

Discussed with: imp, rwatson

Note what options are only for DDS drives.

PR: 35608

-mdoc sweep.

Const poision, deregister and use ANSI definitions.

A minor overhaul: added comments, split cmds in 2, changed synopsis.

Split commands into two groups: one with optional count and one with
required argument. Changed synopsis line accordingly.

Added some hopefully-helpful comments based on experiments, knowing
that not all hardware works the same.

PR: docs/84101
Approved by: keramida
MFC after: 3 days

Don't refer to devices that don't exist.

Expand contractions.

Deal with double whitespace.

Mechanically kill hard sentence breaks.

Backout previous commit. It seems this comment applied to something
else than I thought, and thus really needs to go away.

Noticed by: ru

Reintroduce a comment that was wrongly removed in revision 1.34.

Catch up with the removal of the wt(4) driver.

Change /dev/rsa0 and /dev/rwt0 references to sa0 and wt0.

PR: 55925
Submitted by: Michael L. Squires <mikes@siralan.org>
MFC after: 1 month

Markup bits.

Approved by: re (blanket)

Fix references to non-existing or obsoleted man pages.

PR: docs/51480 (only a small part)
Submitted by: Diomidis D. Spinellis <dds@aueb.gr>

Add information about the SDLT density codes.

Submitted by: "Stewart MacLund" <sundie@lunaticfringe.org>
MFC after: 1 week

Add definitions for the industry-standard DLT density codes.

Obtained from: Quantum DLT8000 manual
MFC after: 1 week

mdoc(7) police: removed unnecessary .Ns.

Use `The .Nm utility'

Make `make WARNS=3' succeed, notably, use %d to printf daddr_t value.
Use `.Nm Ns .' instead of `.Nm .' Add FBSDID. Do not put spaces inside []
in usage string.

remove __P

Unifdef __FreeBSD__

MD5 checksum of binary unchanged.

mdoc(7) police: s/BSD/.Bx/ where appropriate.

Remove whitespace at EOL.

mdoc(7) police: removed HISTORY info from the .Os call.

mdoc(7) police: sort SEE ALSO xrefs (sort -b -f +2 -3 +1 -2).

Removed -I${.CURDIR}/.../sys from CFLAGS.

Print out resid portion of MTIOCGET returned data.

Oops, I'm such an idiot. For reasons I don't really agree with,
all devices are by default known by their 'cooked' name, so
my change was wrong. I thought it was a hangover from old 'block
tape device' support which hasn't worked (if it ever did) since
v6/PWB.

So, the default tape name is now the same as Linux. Far out, man....

The default is /dev/nrsa0 (now), not /dev/nsa0.

Prepare for mdoc(7)NG.

Constify

mdoc(7) police: use the new features of the Nm macro.

Add cross reference to the ast device.
Remove reference to the now defunct wt device.

Default device not longer uses the "r" raw prefix.

Add missing dots

Remove more single-space hard sentence breaks.

Remove single-space hard sentence breaks. These degrade the quality
of the typeset output, tend to make diffs harder to read and provide
bad examples for new-comers to mdoc.

$Id$ -> $FreeBSD$

Add $Id$, to make it simpler for members of the translation teams to
track.

The $Id$ line is normally at the bottom of the main comment block in the
man page, separated from the rest of the manpage by an empty comment,
like so;

.\" $Id$
.\"

If the immediately preceding comment is a @(#) format ID marker than the
the $Id$ will line up underneath it with no intervening blank lines.
Otherwise, an additional blank line is inserted.

Approved by: bde

add and document seteotmodel and geteotmodel commands

Add missing parenthesis. Change "hardware block" to "SCSI logical block".
While I'm here, fix dangling "to".

PR: docs/9940

Fixes alignment of blocksize field to be prettier if
longest density code && density name is used.
Obtained from: Ken Merry

get rid of space padding for compression

Print actual density code as well as string for density- I dunno about others,
but I sure remember 0x15 easier than 'ECMA 17'. Also handle density codes
0 (default) and 0x7f ('same') as special cases.

Print relative (mt_fileno, mt_blkno) position, if known.
Print driver state if not NIL.

finally document new commands

Print out latched cdb's correlated to latched errors in MTIOCERRSTAT case.

Complete the addition of the setmark support
(from Martin.Birgmeier@aon.at).

add in new errstat subcommand (MTIOCSERRSTAT)

Made changes suggested by bruce, plus a couple of others which made -Wall work.
Obtained from:bde@freebsd.org

1) Clarify that a weof count of zero is allowed (flush buffers).
2) Add in the set of {sethpos,setspos,rdhpos,rdspos) commands to implement the
Hardware && SCSI Logical Block position ioctls.

Don't bother trying to support Wangtek tapes on the alpha.

Augment compression and blocksize support. Update table of known densities.

mt should report the compression status.

PR: 5276
Reviewed by: phk
Submitted by: Matt Dillon <dillon@best.net>

Sort cross refereces in section SEE ALSO.

another -I/sys conversion, and add Id line now it's left the vendor branch

Implement "eod" as an alias for "eom". HP-UX uses this name, for
example.

Also cleaned up the man page a little.

Use err(3) instead of local redefinition.

compare return value from getopt against -1 rather than EOF, per the final
posix standard on the topic.

Merge from Lite2

Use the .Fx macro where appropriate.

. cast the error and status registers properly to (unsigned short),
to avoid misinterpreting the 0x8000 bit as a negative sign,

. use the <machine/wtio.h> register def's to print them.

Forgot to update the man page for the `retension' command.

Rename the `retens' command into `retension', to follow existing de-facto
standards.

Add `retens', the user frontend for MTRETENS.

Return early in printreg() when the pointer is NULL. For FreeBSD, the
strings describing the drive status and error bits are so deficient
that the pointer is always NULL.

Reported by: Philippe Charnier <charnier@lirmm.fr>

Remove the dangerous "eof" command that used to be an alias for "weof"
but usually got confused with "eom". It didn't ring the warning bell
saying: "You are probably going to mark your whole tape as deleted
right now."

A warning message pointing to "weof" and "eom" is issued instead.

Make mt(1) orthogonal: now that we print the densities as strings
instead of hex, make it accept density names for input, too.

Round #1 of my st(1) -> mt(1) merge. All the commands should be
covered now, and i've attempted to give textual representations
instead of magic numbers.

The st(4) driver still misses some pieces; i'm going to implement the
EOM functionality RSN.

Any takers for the MTCOMP command? Seems to have never been implemented.

Andreas Klemm's tape erase patches from 1.1.5.1.
Submitted by: andreas

This commit was generated by cvs2svn to compensate for changes in r1590,
which included commits to RCS files with non-trunk default branches.