259128 |
09-Dec-2013 |
gjb |
Remove svn:mergeinfo from the releng/10.0 branch.
After branch creation from stable/10, the stable/10 branch mergeinfo was moved to the root of the branch.
Since there have not been any merges from stable/10 to releng/10.0 yet, we do not need to track any of the existing mergeinfo here.
Merges to releng/10.0 should now be done to the root of the branch.
For future branches during the release cycle, unless otherwise noted, this change will be done as part of the stable/ and releng/ branch creation.
Discussed with: peter Approved by: re (implicit) Sponsored by: The FreeBSD Foundation |
259065 |
07-Dec-2013 |
gjb |
- Copy stable/10 (r259064) to releng/10.0 as part of the 10.0-RELEASE cycle. - Update __FreeBSD_version [1] - Set branch name to -RC1
[1] 10.0-CURRENT __FreeBSD_version value ended at '55', so start releng/10.0 at '100' so the branch is started with a value ending in zero.
Approved by: re (implicit) Sponsored by: The FreeBSD Foundation |
257396 |
30-Oct-2013 |
neel |
MFC r257293.
Add support for PCI-to-ISA LPC bridge emulation. If the LPC bus is attached to a virtual machine then we implicitly create COM1 and COM2 ISA devices.
Prior to this change the only way of attaching a COM port to the virtual machine was by presenting it as a PCI device that is mapped at the legacy I/O address 0x3F8 or 0x2F8.
There were some issues with the original approach: - It did not work at all with UEFI because UEFI will reprogram the PCI device BARs and remap the COM1/COM2 ports at non-legacy addresses. - OpenBSD GENERIC kernel does not create a /dev/console because it expects the uart device at the legacy 0x3F8/0x2F8 address to be an ISA device. - It was functional with a FreeBSD guest but caused the console to appear on /dev/ttyu2 which was not intuitive.
The uart emulation is now independent of the bus on which it resides. Thus it is possible to have uart devices on the PCI bus in addition to the legacy COM1/COM2 devices behind the LPC bus.
The command line option to attach ISA COM1/COM2 ports to a virtual machine is "-s <bus>,lpc -l com1,stdio".
The command line option to create a PCI-attached uart device is: "-s <bus>,uart[,stdio]"
The command line option to create PCI-attached COM1/COM2 device is: "-S <bus>,uart[,stdio]". This style of creating COM ports is deprecated.
Approved by: re (glebius)
|
256381 |
12-Oct-2013 |
markm |
Merge from project branch via main. Uninteresting commits are trimmed.
Refactor of /dev/random device. Main points include:
* Userland seeding is no longer used. This auto-seeds at boot time on PC/Desktop setups; this may need some tweeking and intelligence from those folks setting up embedded boxes, but the work is believed to be minimal.
* An entropy cache is written to /entropy (even during installation) and the kernel uses this at next boot.
* An entropy file written to /boot/entropy can be loaded by loader(8)
* Hardware sources such as rdrand are fed into Yarrow, and are no longer available raw.
------------------------------------------------------------------------ r256240 | des | 2013-10-09 21:14:16 +0100 (Wed, 09 Oct 2013) | 4 lines
Add a RANDOM_RWFILE option and hide the entropy cache code behind it. Rename YARROW_RNG and FORTUNA_RNG to RANDOM_YARROW and RANDOM_FORTUNA. Add the RANDOM_* options to LINT.
------------------------------------------------------------------------ r256239 | des | 2013-10-09 21:12:59 +0100 (Wed, 09 Oct 2013) | 2 lines
Define RANDOM_PURE_RNDTEST for rndtest(4).
------------------------------------------------------------------------ r256204 | des | 2013-10-09 18:51:38 +0100 (Wed, 09 Oct 2013) | 2 lines
staticize struct random_hardware_source
------------------------------------------------------------------------ r256203 | markm | 2013-10-09 18:50:36 +0100 (Wed, 09 Oct 2013) | 2 lines
Wrap some policy-rich code in 'if NOTYET' until we can thresh out what it really needs to do.
------------------------------------------------------------------------ r256184 | des | 2013-10-09 10:13:12 +0100 (Wed, 09 Oct 2013) | 2 lines
Re-add /dev/urandom for compatibility purposes.
------------------------------------------------------------------------ r256182 | des | 2013-10-09 10:11:14 +0100 (Wed, 09 Oct 2013) | 3 lines
Add missing include guards and move the existing ones out of the implementation namespace.
------------------------------------------------------------------------ r256168 | markm | 2013-10-08 23:14:07 +0100 (Tue, 08 Oct 2013) | 10 lines
Fix some just-noticed problems:
o Allow this to work with "nodevice random" by fixing where the MALLOC pool is defined.
o Fix the explicit reseed code. This was correct as submitted, but in the project branch doesn't need to set the "seeded" bit as this is done correctly in the "unblock" function.
o Remove some debug ifdeffing.
o Adjust comments.
------------------------------------------------------------------------ r256159 | markm | 2013-10-08 19:48:11 +0100 (Tue, 08 Oct 2013) | 6 lines
Time to eat crow for me.
I replaced the sx_* locks that Arthur used with regular mutexes; this turned out the be the wrong thing to do as the locks need to be sleepable. Revert this folly.
# Submitted by: Arthur Mesh <arthurmesh@gmail.com> (In original diff)
------------------------------------------------------------------------ r256138 | des | 2013-10-08 12:05:26 +0100 (Tue, 08 Oct 2013) | 10 lines
Add YARROW_RNG and FORTUNA_RNG to sys/conf/options.
Add a SYSINIT that forces a reseed during proc0 setup, which happens fairly late in the boot process.
Add a RANDOM_DEBUG option which enables some debugging printf()s.
Add a new RANDOM_ATTACH entropy source which harvests entropy from the get_cyclecount() delta across each call to a device attach method.
------------------------------------------------------------------------ r256135 | markm | 2013-10-08 07:54:52 +0100 (Tue, 08 Oct 2013) | 8 lines
Debugging. My attempt at EVENTHANDLER(multiuser) was a failure; use EVENTHANDLER(mountroot) instead.
This means we can't count on /var being present, so something will need to be done about harvesting /var/db/entropy/... .
Some policy now needs to be sorted out, and a pre-sync cache needs to be written, but apart from that we are now ready to go.
Over to review.
------------------------------------------------------------------------ r256094 | markm | 2013-10-06 23:45:02 +0100 (Sun, 06 Oct 2013) | 8 lines
Snapshot.
Looking pretty good; this mostly works now. New code includes:
* Read cached entropy at startup, both from files and from loader(8) preloaded entropy. Failures are soft, but announced. Untested.
* Use EVENTHANDLER to do above just before we go multiuser. Untested.
------------------------------------------------------------------------ r256088 | markm | 2013-10-06 14:01:42 +0100 (Sun, 06 Oct 2013) | 2 lines
Fix up the man page for random(4). This mainly removes no-longer-relevant details about HW RNGs, reseeding explicitly and user-supplied entropy.
------------------------------------------------------------------------ r256087 | markm | 2013-10-06 13:43:42 +0100 (Sun, 06 Oct 2013) | 6 lines
As userland writing to /dev/random is no more, remove the "better than nothing" bootstrap mode.
Add SWI harvesting to the mix.
My box seeds Yarrow by itself in a few seconds! YMMV; more to follow.
------------------------------------------------------------------------ r256086 | markm | 2013-10-06 13:40:32 +0100 (Sun, 06 Oct 2013) | 11 lines
Debug run. This now works, except that the "live" sources haven't been tested. With all sources turned on, this unlocks itself in a couple of seconds! That is no my box, and there is no guarantee that this will be the case everywhere.
* Cut debug prints.
* Use the same locks/mutexes all the way through.
* Be a tad more conservative about entropy estimates.
------------------------------------------------------------------------ r256084 | markm | 2013-10-06 13:35:29 +0100 (Sun, 06 Oct 2013) | 5 lines
Don't use the "real" assembler mnemonics; older compilers may not understand them (like when building CURRENT on 9.x).
# Submitted by: Konstantin Belousov <kostikbel@gmail.com>
------------------------------------------------------------------------ r256081 | markm | 2013-10-06 10:55:28 +0100 (Sun, 06 Oct 2013) | 12 lines
SNAPSHOT.
Simplify the malloc pools; We only need one for this device.
Simplify the harvest queue.
Marginally improve the entropy pool hashing, making it a bit faster in the process.
Connect up the hardware "live" source harvesting. This is simplistic for now, and will need to be made rate-adaptive.
All of the above passes a compile test but needs to be debugged.
------------------------------------------------------------------------ r256042 | markm | 2013-10-04 07:55:06 +0100 (Fri, 04 Oct 2013) | 25 lines
Snapshot. This passes the build test, but has not yet been finished or debugged.
Contains:
* Refactor the hardware RNG CPU instruction sources to feed into the software mixer. This is unfinished. The actual harvesting needs to be sorted out. Modified by me (see below).
* Remove 'frac' parameter from random_harvest(). This was never used and adds extra code for no good reason.
* Remove device write entropy harvesting. This provided a weak attack vector, was not very good at bootstrapping the device. To follow will be a replacement explicit reseed knob.
* Separate out all the RANDOM_PURE sources into separate harvest entities. This adds some secuity in the case where more than one is present.
* Review all the code and fix anything obviously messy or inconsistent. Address som review concerns while I'm here, like rename the pseudo-rng to 'dummy'.
# Submitted by: Arthur Mesh <arthurmesh@gmail.com> (the first item)
------------------------------------------------------------------------ r255319 | markm | 2013-09-06 18:51:52 +0100 (Fri, 06 Sep 2013) | 4 lines
Yarrow wants entropy estimations to be conservative; the usual idea is that if you are certain you have N bits of entropy, you declare N/2.
------------------------------------------------------------------------ r255075 | markm | 2013-08-30 18:47:53 +0100 (Fri, 30 Aug 2013) | 4 lines
Remove short-lived idea; thread to harvest (eg) RDRAND enropy into the usual harvest queues. It was a nifty idea, but too heavyweight.
# Submitted by: Arthur Mesh <arthurmesh@gmail.com>
------------------------------------------------------------------------ r255071 | markm | 2013-08-30 12:42:57 +0100 (Fri, 30 Aug 2013) | 4 lines
Separate out the Software RNG entropy harvesting queue and thread into its own files.
# Submitted by: Arthur Mesh <arthurmesh@gmail.com>
------------------------------------------------------------------------ r254934 | markm | 2013-08-26 20:07:03 +0100 (Mon, 26 Aug 2013) | 2 lines
Remove the short-lived namei experiment.
------------------------------------------------------------------------ r254928 | markm | 2013-08-26 19:35:21 +0100 (Mon, 26 Aug 2013) | 2 lines
Snapshot; Do some running repairs on entropy harvesting. More needs to follow.
------------------------------------------------------------------------ r254927 | markm | 2013-08-26 19:29:51 +0100 (Mon, 26 Aug 2013) | 15 lines
Snapshot of current work;
1) Clean up namespace; only use "Yarrow" where it is Yarrow-specific or close enough to the Yarrow algorithm. For the rest use a neutral name.
2) Tidy up headers; put private stuff in private places. More could be done here.
3) Streamline the hashing/encryption; no need for a 256-bit counter; 128 bits will last for long enough.
There are bits of debug code lying around; these will be removed at a later stage.
------------------------------------------------------------------------ r254784 | markm | 2013-08-24 14:54:56 +0100 (Sat, 24 Aug 2013) | 39 lines
1) example (partially humorous random_adaptor, that I call "EXAMPLE") * It's not meant to be used in a real system, it's there to show how the basics of how to create interfaces for random_adaptors. Perhaps it should belong in a manual page
2) Move probe.c's functionality in to random_adaptors.c * rename random_ident_hardware() to random_adaptor_choose()
3) Introduce a new way to choose (or select) random_adaptors via tunable "rngs_want" It's a list of comma separated names of adaptors, ordered by preferences. I.e.: rngs_want="yarrow,rdrand"
Such setting would cause yarrow to be preferred to rdrand. If neither of them are available (or registered), then system will default to something reasonable (currently yarrow). If yarrow is not present, then we fall back to the adaptor that's first on the list of registered adaptors.
4) Introduce a way where RNGs can play a role of entropy source. This is mostly useful for HW rngs.
The way I envision this is that every HW RNG will use this functionality by default. Functionality to disable this is also present. I have an example of how to use this in random_adaptor_example.c (see modload event, and init function)
5) fix kern.random.adaptors from kern.random.adaptors: yarrowpanicblock to kern.random.adaptors: yarrow,panic,block
6) add kern.random.active_adaptor to indicate currently selected adaptor: root@freebsd04:~ # sysctl kern.random.active_adaptor kern.random.active_adaptor: yarrow
# Submitted by: Arthur Mesh <arthurmesh@gmail.com>
Submitted by: Dag-Erling Smørgrav <des@FreeBSD.org>, Arthur Mesh <arthurmesh@gmail.com> Reviewed by: des@FreeBSD.org Approved by: re (delphij) Approved by: secteam (des,delphij)
|
256366 |
12-Oct-2013 |
rpaulo |
MFC 256365 Remove most of the ATF tools and the _atf user.
Approved by: re
|
256281 |
10-Oct-2013 |
gjb |
Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.
Approved by: re (implicit) Sponsored by: The FreeBSD Foundation
|
256176 |
09-Oct-2013 |
neel |
Parse the memory size parameter using expand_number() to allow specifying the memory size more intuitively (e.g. 512M, 4G etc).
Submitted by: rodrigc Reviewed by: grehan Approved by: re (blanket)
|
255362 |
07-Sep-2013 |
markm |
Bring in some behind-the-scenes development, mainly By Arthur Mesh, the rest by me.
o Namespace cleanup; the Yarrow name is now restricted to where it really applies; this is in anticipation of being augmented or replaced by Fortuna in the future. Fortuna is mentioned, but behind #if logic, and is ignorable for now.
o The harvest queue is pulled out into its own modules.
o Entropy harvesting is emproved, both by being made more conservative, and by separating (a bit!) the sources. Available entropy crumbs are marginally improved.
o Selection of sources is made clearer. With recent revelations, this will receive more work in the weeks and months to come.
Submitted by: Arthur Mesh (partly) <arthurmesh@gmail.com>
|
255120 |
01-Sep-2013 |
mav |
Bring legacy CAM target implementation back into API/KPI-coherent and even functional state. While CTL is much more superior target from all points, there is no reason why this code should not work.
Tested with ahc(4) as target side HBA.
MFC after: 2 weeks
|
253750 |
28-Jul-2013 |
avg |
Revert r253748,253749
This WIP should not have been committed yet.
Pointyhat to: avg
|
253749 |
28-Jul-2013 |
avg |
remove needless inclusion of machine/cpu.h in userland
MFC after: 21 days
|
253421 |
17-Jul-2013 |
glebius |
Fix typo.
Submitted by: ae
|
253420 |
17-Jul-2013 |
glebius |
Improve example, so that it doesn't dump core when example module isn't loaded.
|
252356 |
28-Jun-2013 |
davide |
- Trim an unused and bogus Makefile for mount_smbfs. - Reconnect with some minor modifications, in particular now selsocket() internals are adapted to use sbintime units after recent'ish calloutng switch.
|
252314 |
27-Jun-2013 |
jkim |
Add "amdfam10" to the supported CPU types for amd64. This complements r251691 and 251692.
|
251692 |
13-Jun-2013 |
jkim |
Add a missing comma.
|
251691 |
13-Jun-2013 |
jkim |
- Document GCC support for AMD Family 10h processors (amdfam10). - Document Clang support for AMD Jaguar processors (btver2).
|
250460 |
10-May-2013 |
eadler |
Fxi a bunch of typos.
PR: misc/174625 Submitted by: Jeremy Chadwick <jdc@koitsu.org>
|
250012 |
28-Apr-2013 |
eadler |
Add an alternate version of beastie to the examples directory.
PR: docs/38556 Submitted by: Rahul Siddharthan <rsidd@online.fr> Submitted on: 25 May 2002 22:49:56 -0000 MFC After: 2 weeks
|
249952 |
26-Apr-2013 |
bdrewery |
Fix examples for overriding INSTALL to not suggest hardcoding 'install' since it breaks buildworld after the introduction and use of 'install -l' in r245752. Overriding INSTALL causes /usr/bin/install to be used instead of the proper /usr/src/tools/install.sh which handles the new flag.
Approved by: bapt MFC after: 2 weeks
|
248840 |
28-Mar-2013 |
neel |
Add the "-g <gdport>" option to the vmrun.sh script that enables remote debugging of the guest via kgdb.
See also: https://wiki.freebsd.org/BHyVe/gdb
Obtained from: NetApp
|
248617 |
22-Mar-2013 |
des |
Retire the mislabeled ENABLE_SUID_SSH knob.
|
248484 |
19-Mar-2013 |
neel |
Add bhyve to examples.
Requested by: alfred, julian Obtained from: NetApp
|
248168 |
11-Mar-2013 |
bapt |
Disconnect files removed in r248151
|
248151 |
11-Mar-2013 |
bapt |
Ports are no more exported via cvsup, remove cvsup examples and documentation refering to ports
MFC after: 2 days
|
248097 |
09-Mar-2013 |
attilio |
Garbage collect NWFS and NCP bits which are now completely disconnected from the tree since few months.
This patch is not targeted for MFC.
|
247640 |
02-Mar-2013 |
attilio |
Garbage collect PORTALFS bits which are now completely disconnected from the tree since few months.
This patch is not targeted for MFC.
|
244998 |
03-Jan-2013 |
peter |
Tone down the encouragement to use cvsup. Add directions to the handbook pages that cover the more current methods and bring closer to reality.
|
244122 |
11-Dec-2012 |
eadler |
Remove 'dangerous' instructions from the example make.conf. Clarify when and why these might be used and that this isn't a supported configuration.
PR: docs/144488 Submitted by: amdmi3 Approved by: cperciva (implicit) MFC after: 2 weeks
|
244040 |
08-Dec-2012 |
eadler |
A number of places in the source tree still reference cuad.* after sio(4) was deprecated by uart(4).
s/cuad/cuau/g/
PR: docs/171533 Reviewed by: imp Approved by: cperciva (implicit) MFC after: 3 weeks
|
243846 |
04-Dec-2012 |
jkim |
Tidy up bsd.cpu.mk for X86 CPUs:
- Do not limit recent processors to "prescott" class for i386 target. There is no reason for this hack because clang is default now. On top of that, it will only grow indefinitely over time. - Add more CPUTYPEs, i.e., "athlon-fx", "core-avx2", "atom", "penryn", and "yonah". Note "penryn" and "yonah" are intentionally undocumented because they are not supported by gcc and marked deprecated by clang. - Add more CPUTYPE aliases, i.e., "barcelona" (-> amdfam10), "westmere" and "nehalem" (-> corei7). Note these are intentionally undocumented because they are not supported by (base) gcc and/or clang. However, LLVM (backend) seems to "know" the differences. Most likely, they were deprecated with other vendor code names and clang did not bother implementing them at all. - Add i686 to MACHINE_CPU for "c3-2" (VIA Nehemiah). Both gcc & clang treat it like an i686-class processor. - Add IDT "winchip2" and "winchip-c6" for completeness (undocumented). - Order processors per make.conf example, i.e., CPU vendors and models. - Tidy up make.conf example, i.e., remove "by gcc" (because we have aliases) and remove "prescott" from AMD64 architecture (because it is not correct).
|
243831 |
03-Dec-2012 |
jkim |
Remove fictitious support for 80386-class CPUs from bsd.cpu.mk and make(1). It was removed from head more than 8 years ago (see r137784 and r137785).
Reviewed by: imp, delphij, dim
|
243315 |
19-Nov-2012 |
jkim |
Clean up and update comments for CPUTYPE.
Requested by: rdivacky
|
242647 |
06-Nov-2012 |
mav |
Decode common state bits in getencstat output.
|
242638 |
06-Nov-2012 |
mav |
Add -c option to sesd to make it clear enclosure status after reading it in case if it is not permanent and was fixed.
|
242634 |
05-Nov-2012 |
mav |
Rise priority of the informational messages from LOG_INFO to LOG_NOTICE, same as used for OK status. Otherwise it looks strange when OK status is reported, while informational is not.
|
242621 |
05-Nov-2012 |
mav |
Fix a minor typo.
|
241823 |
22-Oct-2012 |
marcel |
Add ATF to the build. This is may be a bit rought around the egdes, but committing it helps to get everyone on the same page and makes sure we make progress.
Tinderbox breakages that are the result of this commit are entirely the committer's fault -- in other words: buildworld testing on amd64 only.
Credits follow:
Submitted by: Garrett Cooper <yanegomi@gmail.com> Sponsored by: Isilon Systems Based on work by: keramida@ Thanks to: gnn@, mdf@, mlaier@, sjg@ Special thanks to: keramida@
|
241680 |
18-Oct-2012 |
attilio |
Disconnect non-MPSAFE SMBFS from the build in preparation for dropping GIANT from VFS. In addition, disconnect also netsmb, which is a base requirement for SMBFS.
In the while SMBFS regular users can use FUSE interface and smbnetfs port to work with their SMBFS partitions.
Also, there are ongoing efforts by vendor to support in-kernel smbfs, so there are good chances that it will get relinked once properly locked.
This is not targeted for MFC.
|
241629 |
17-Oct-2012 |
attilio |
Disconnect non-MPSAFE NWFS from the build in preparation for dropping GIANT from VFS. In addition, disconnect also netncp, which is a base requirement for NWFS.
In the possibility of a future maintenance of the code and later readd to the FreeBSD base, maybe we should think about a better location for netncp. I'm not entirely sure the / top location is actually right, however I will let network people to comment on that more specifically.
This is not targeted for MFC.
|
241606 |
16-Oct-2012 |
attilio |
Disconnect non-MPSAFE PORTALFS from the build in preparation for dropping GIANT from VFS.
This is not targeted for MFC.
|
241602 |
16-Oct-2012 |
eadler |
Add a bunch more example completions.
Submitted by: wblock Approved by: cperciva (implicit) MFC after: 3 days
|
241394 |
10-Oct-2012 |
kevlo |
Revert previous commit...
Pointyhat to: kevlo (myself)
|
241370 |
09-Oct-2012 |
kevlo |
Prefer NULL over 0 for pointers
|
241115 |
01-Oct-2012 |
eadler |
Indicate (loudly) that ports csup is going away.
While here clarify some other portions.
Approved by: cperciva (implicit) MFC after: 3 days
|
240518 |
14-Sep-2012 |
eadler |
Correct double "the the"
Approved by: cperciva MFC after: 3 days
|
240253 |
09-Sep-2012 |
eadler |
Minor English grammar fixes. Specifically document that an incomplete ports tree is not supported. Remove useless comment about sendmail.
Reviewed by: yuri.pankov@gmail.com Approved by: cperciva (implicit) MFC after: 1 week X-MFC-With: r240252
|
240252 |
09-Sep-2012 |
eadler |
Remove documentation and www cvsup files as they are no longer useful with the switch to subversion.
Approved by: gjb (man pages) Approved by: cperciva (example files, implicit) MFC after: 1 week
|
239130 |
07-Aug-2012 |
emaste |
Minor style(9) improvement
|
238603 |
18-Jul-2012 |
joerg |
Add some examples about how to use FreeBSD's libusb20 in your own code.
|
237681 |
28-Jun-2012 |
rpaulo |
Add the 'inet' keyword after the nat rule to avoid interfering with IPv6.
|
237601 |
26-Jun-2012 |
ken |
Fix an issue that caused the kernel to panic inside CTL when trying to attach to target capable HBAs that implement the old immediate notify (XPT_IMMED_NOTIFY) and notify acknowledge (XPT_NOTIFY_ACK) CCBs. The new API has been in place since SVN change 196008 in 2009.
The solution is two-fold: fix CTL to handle the responses from the HBAs, and convert the HBA drivers in question to use the new API.
These drivers have not been tested with CTL, so how well they will interoperate with CTL is unknown.
scsi_target.c: Update the userland target example code to use the new immediate notify API.
scsi_ctl.c: Detect when an immediate notify CCB is returned with CAM_REQ_INVALID or CAM_PROVIDE_FAIL status, and just free it.
Fix a duplicate assignment.
aic79xx.c, aic79xx_osm.c: Update the aic79xx driver to use the new API. Target mode is not enabled on for this driver, so the changes will have no practical effect.
aic7xxx.c, aic7xxx_osm.c: Update the aic7xxx driver to use the new API.
sbp_targ.c: Update the firewire target code to work with the new API.
mpt_cam.c: Update the mpt(4) driver to work with the new API. Target mode is only enabled for Fibre Channel mpt(4) devices.
MFC after: 3 days
|
237018 |
13-Jun-2012 |
joel |
Sync example file with mdoc changes made in rev 235450.
|
236999 |
13-Jun-2012 |
eadler |
Include a warning when using the example code as it may not work in unusual situations. Also slightly optimize the command.
Submitted by: Jeremy Chadwick jdc@koitsu.org Approved by: cperciva (implicit) MFC after: 1 week
|
236965 |
12-Jun-2012 |
des |
Finally nuke auth.conf, nine years after it was deprecated. The only thing it was still used for was to set the "global default" password hash. Since the stock auth.conf contained nothing but comments, the global default was actually the first algorithm in crypt(3)'s list, which happens to be DES; I take the fact that nobody noticed as proof that it was not used outside of crypt(3).
The only other use in our tree was in the Kerberos support code in in tinyware's passwd(1). I removed that code in an earlier commit; it would not have compiled anyway, as it only supported Kerberos IV.
The auth_getval() function is now a stub that always returns NULL, which has the same effect as a functional auth_getval() with an empty auth.conf.
MFC after: 3 weeks
|
235911 |
24-May-2012 |
mav |
MFprojects/zfsd: Revamp the CAM enclosure services driver. This updated driver uses an in-kernel daemon to track state changes and publishes physical path location information\for disk elements into the CAM device database.
Sponsored by: Spectra Logic Corporation Sponsored by: iXsystems, Inc. Submitted by: gibbs, will, mav
|
235481 |
15-May-2012 |
eadler |
Rework sample code which sets SSH_AUTH_SOCK to the user's ssh-agent socket path if running
PR: 167932 Submitted by: madpilot (pr) Submitted by: wblock (final patch) Reviewed by: If someone else reviewed your modification. Approved by: cperciva (implicit) MFC after: 3 days
|
234159 |
12-Apr-2012 |
eadler |
Sort completions Add a new one for sysctl
Submitted by: rm (the new completion) Approved by: cperciva (implicit) MFC after: 3 days
|
234135 |
11-Apr-2012 |
eadler |
Fix typo (add a missing '%/' in sed)
Submitted by: jmallett Approved by: cperciva (implicit) MFC after: 3 days
|
234077 |
10-Apr-2012 |
eadler |
Update examples with corrections from the author
PR: ports/160689 Submitted by: mickael.maillot@gmail.com Approved by: cperciva (implicit) MFC after: 1 days (with r233429)
|
233437 |
24-Mar-2012 |
eadler |
Add a few more examples
Submitted by: jmallett Approved by: cperciva (implicit) MFC after: 3 days X-MFC-With: r233429
|
233429 |
24-Mar-2012 |
eadler |
- Make the default values for tcsh more user friendly - Add an examples file with many of the not accepted suggestions from the discussion
PR: conf/160689 Reviewed by: many Discussed on: current Approved by: cperciva
|
233428 |
24-Mar-2012 |
eadler |
Direct users to csup instead of cvsup in the csup-file boilerplate text.
Reviewed by: maxim, des, swills Approved by: cperciva MFC after: 3 days
|
230306 |
18-Jan-2012 |
schweikh |
Comment cosmetics: end more sentences with full stops.
|
229997 |
12-Jan-2012 |
ken |
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully functional.
ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c, ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes.
ctl_debug.h: Debugging support.
ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions.
ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port.
ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details.
ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls.
ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL.
ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command.
ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL.
amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
|
229831 |
09-Jan-2012 |
eadler |
X11BASE has been deprecated for a long time and will die soon
Approved by: x11 (eadler) Approved by: brucec MFC after: 1 week
|
228481 |
13-Dec-2011 |
ed |
Change targ(4) to use cdevpriv, instead of multiple character devices.
Also update the manpage and the scsi_target example program accordingly.
Discussed on: scsi@ Tested by: Chuck Tuffli <chuck tuffli net>
|
228462 |
13-Dec-2011 |
mav |
- Fix different variable types use in different files after r121184, causing problems on amd64. - s/%lud/%lu/.
MFC after: 1 month
|
227844 |
22-Nov-2011 |
marius |
Update to use DEVMETHOD_END.
|
225950 |
03-Oct-2011 |
ken |
Add descriptor sense support to CAM, and honor sense residuals properly in CAM.
Desriptor sense is a new sense data format that originated in SPC-3. Among other things, it allows for an 8-byte info field, which is necessary to pass back block numbers larger than 4 bytes.
This change adds a number of new functions to scsi_all.c (and therefore libcam) that abstract out most access to sense data.
This includes a bump of CAM_VERSION, because the CCB ABI has changed. Userland programs that use the CAM pass(4) driver will need to be recompiled.
camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len().
Use scsi_get_sks() instead of accessing sense key specific data directly.
scsi_modes: Update the control mode page to the latest version (SPC-4).
scsi_cmds.c, scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data.
ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually.
cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly.
cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches.
scsi_all.h: Lots of updated SCSI sense data and other structures.
Add function prototypes for the new sense data functions.
Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file.
Add macros to calculate whether fields are present and filled in fixed and descriptor sense data
scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case.
Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec.
Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS).
In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first.
Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered.
Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data.
Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data.
Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present.
Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense.
Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only.
Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor.
Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines.
Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data.
Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only.
mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed.
sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly.
sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data().
ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key.
mps_sas.c, mpt_cam.c: Set the sense residual properly.
iir.c: Use scsi_set_sense_data() instead of building sense data by hand.
iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly.
umass.c: Use scsi_set_sense_data() to build sense data.
Grab the sense key using scsi_get_sense_key().
Calculate the sense residual properly.
isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values.
Calculate and set the sense residual.
MFC after: 3 days Sponsored by: Spectra Logic Corporation
|
225764 |
26-Sep-2011 |
kensmith |
Forgot to add "RELENG_8" to list of CVS tags.
Submitted by: Mamontov Roman <mr.xanto at gmail.com> Approved by: re (implicit)
|
225757 |
26-Sep-2011 |
kensmith |
Shift head from 9.0-CURRENT to 10.0-CURRENT in preparation for releasing it from the 9.0-RELEASE release cycle code freeze.
Approved by: re (implicit)
|
223148 |
16-Jun-2011 |
ru |
It's a bit odd, but "make update" in src/ can also update the ports/, doc/, and now www/ trees, but only using the "cvsup" transport.
When "make update" is run using a tree's makefile, it can also use "cvs" (except for www/) and "svn" (only src/).
Clean up documentation and code regarding "make update":
- Increase oddness by adding support for WWWSUPFILE and NO_WWWUPDATE to Makefile.inc1 (analogous to PORTSSUPFILE/NO_PORTSUPDATE and DOCSUPFILE/NO_DOCUPDATE; WWWSUPFILE already supported by www/Makefile).
- Document all trees that support CVS_UPDATE.
- Document all trees that support SUP_UPDATE.
- Document SVN_UPDATE.
- Document NO_WWWUPDATE.
- make.conf(5) mistakenly said that *SUPFILE* had defaults.
- Add an example entry for WWWSUPFILE.
|
222339 |
27-May-2011 |
mav |
Change new constant names to ones used by OpenSolaris.
|
222338 |
27-May-2011 |
mav |
Oops, fix typo in r222336.
|
222337 |
27-May-2011 |
mav |
Add ses/srcs/eltsub.h to the list of files to be installed. It is required for user-level SES example tools build.
|
222336 |
27-May-2011 |
mav |
Add names for few more SES element types according SES-2 specification.
|
222179 |
22-May-2011 |
uqs |
Fix more typos to be a good example.
Found by: codespell
|
222175 |
22-May-2011 |
uqs |
Remove typos, tabs-after-spaces and EOL whitespace. Convert to UTF-8.
|
220256 |
01-Apr-2011 |
emaste |
Uuencode the sample "binary" firmware image file (instead of explicitly adding \0 bytes). This is a technique that would be used in an actual driver and is more suitable as an example.
Reviewed by: mlaier
|
220233 |
01-Apr-2011 |
emaste |
Unbreak installworld after r220205.
Noticed by: np Pointy hat to: emaste
|
220205 |
31-Mar-2011 |
emaste |
Avoid having a binary file in our source tree and instead create it at build time, to avoid possible grief maintaining FreeBSD source in alternative version control tools.
|
219858 |
22-Mar-2011 |
glebius |
Give better URL to the list of available CVSup mirrors.
|
219376 |
07-Mar-2011 |
mm |
Add AMD Geode CPU type to bsd.cpu.mk and examples/etc/make.conf For CPUTYPE=core2 use -march=core2
PR: gnu/155308 MFC after: 2 weeks
|
219353 |
06-Mar-2011 |
dougb |
mbone is no longer a physical category
Submitted by: pav
|
218914 |
21-Feb-2011 |
lstewart |
Actually install the example Khelp module committed in r218545.
Sponsored by: FreeBSD Foundation MFC after: 4 weeks X-MFC with: r218545
|
218896 |
20-Feb-2011 |
mm |
Add opteron-sse3, athlon64-sse3 and k8-sse3 cpu types to bsd.cpu.mk. - add "sse3" to MACHINE_CPU for the new cpu types - for i386, default to CPUTYPE=prescott for the new cpu types
PR: gnu/154906 Discussed with: kib, kan, dim MFC after: 2 weeks
|
218854 |
19-Feb-2011 |
brucec |
Update the icmp example to show allowing only the safe types.
Suggested by: Tom Judge <tom at tomjudge.com> MFC after: 3 days
|
218620 |
12-Feb-2011 |
brucec |
If the pf.conf(5) example file is copied when setting up a firewall it's easy to forget about icmp. Update the file to show allowing icmp through the firewall.
PR: docs/144986 MFC after: 1 month
|
218545 |
11-Feb-2011 |
lstewart |
Add an example Khelp module, which will be referenced in the forthcoming Khelp documentation.
Sponsored by: FreeBSD Foundation Discussed with: David Hayes <dahayes at swin edu au> MFC after: 5 weeks X-MFC with: r216615
|
217826 |
25-Jan-2011 |
sem |
Remove DOS-style EOLs
Approved by: kib
|
217566 |
19-Jan-2011 |
mdf |
Fix a few more SYSCTL_PROC() that were missing a CTLFLAG type specifier.
|
216820 |
30-Dec-2010 |
marius |
- Add CPUTYPE support for sparc64. The net result is that it's now possible to let the compiler optimize for the famility of UltraSPARC-III CPUs as the default already was to optimize for UltraSPARC-I/II and generating generic 64-bit V9 is mainly for reference purposes. At least for SPARC64-V CPUs code optimized for UltraSPARC-I/II still is the most performant one. Thanks go to Michael Moll for testing SPARC64-V. - Move a booke MACHINE_CPU bit into the right section.
|
214309 |
24-Oct-2010 |
julian |
Add Makefile entry to install two new example files.
MFC after: 2 weeks
|
214306 |
24-Oct-2010 |
julian |
Add two scripts that demonstrate how to make and hook together jails using teh vortual networking feature.
Submitted by: Yavuz Gokirmak MFC after: 2 weeks
|
213645 |
09-Oct-2010 |
gordon |
Remove the manpath.config entry now that it's no longer installed.
Submitted by: b. f. Approved by: wes (mentor implicit)
|
212138 |
02-Sep-2010 |
maxim |
o csup(1) does not have -g flag. Remove it from the example.
PR: conf/150214 Submitted by: Li MFC after: 1 week
|
210482 |
25-Jul-2010 |
bcr |
Add an example to encourage people to have a look at either make(1) or /usr/ports/ports-mgmt/portconf for port-specific variables/options to compile a port.
PR: docs/145655 Submitted by: Armin Pirkovitsch (armin at frozen dash zone dot org) Discussed with: dougb MFC after: 7 days
|
209455 |
23-Jun-2010 |
kevlo |
Fix missing argument for errx(). While here, clean up the code a bit.
|
209199 |
15-Jun-2010 |
kib |
Fix the syscall module name after r205320.
Submitted by: Vladislav Movchan <vladislav.movchan gmail com> MFC after: 1 week
|
206996 |
21-Apr-2010 |
avg |
indent.pro example: actually install the sample file
|
206176 |
05-Apr-2010 |
avg |
indent.pro example: put all options one per line
This should help with modification tracking.
Discussed with: bde MFC after: 7 days
|
206175 |
05-Apr-2010 |
avg |
indent.pro example: correctly place -ta option
The options are sorted, leading 'n' (for 'off') should be ignored.
Pointed out by: bde MFC after: 7 days
|
206103 |
02-Apr-2010 |
avg |
indent.pro: replace a bunch of -T types with -ta introduced in r205989
Suggested by: bde, Hans Petter Selasky MFC after: 10 days
|
206102 |
02-Apr-2010 |
avg |
add example indent.pro file believed to produce code with minimal differences from KNF
This file is what bde uses! With addition of some types from queue(3) by hps. Please note that the output will not be KNF and currently it's not possible to achieve correct KNF with any combination of options. indent(1) needs to be made smarter.
Some issues: o indent produces a space between a queue type macro and opening parenthesis o indent produces a tab before __packed and __aligned o indent produce a space after #define
bde also notes difference in the following options between this profile and profile in /usr/src/admin/style of 4.4BSD: -cdb -ei -ip8 -nsob
Also, NetBSD uses -di0 instead of -di8.
Location for the profile is suggested by jh.
Submitted by: Hans Petter Selasky (parts) Obtained from: bde :-) MFC after: 10 days X-ToDo: make indent able to produce proper (perfect) KNF X-Perhaps-ToDo: make KNF default output
|
204585 |
02-Mar-2010 |
uqs |
Always assign WARNS using ?=
- fix some nearby style bugs - include Makefile.inc where it makes sense and reduces duplication
Approved by: ed (co-mentor)
|
204076 |
18-Feb-2010 |
pjd |
Please welcome HAST - Highly Avalable Storage.
HAST allows to transparently store data on two physically separated machines connected over the TCP/IP network. HAST works in Primary-Secondary (Master-Backup, Master-Slave) configuration, which means that only one of the cluster nodes can be active at any given time. Only Primary node is able to handle I/O requests to HAST-managed devices. Currently HAST is limited to two cluster nodes in total.
HAST operates on block level - it provides disk-like devices in /dev/hast/ directory for use by file systems and/or applications. Working on block level makes it transparent for file systems and applications. There in no difference between using HAST-provided device and raw disk, partition, etc. All of them are just regular GEOM providers in FreeBSD.
For more information please consult hastd(8), hastctl(8) and hast.conf(5) manual pages, as well as http://wiki.FreeBSD.org/HAST.
Sponsored by: FreeBSD Foundation Sponsored by: OMCnet Internet Service GmbH Sponsored by: TransIP BV
|
203349 |
01-Feb-2010 |
wkoszek |
Conform style.Makefile(5) and replace = and += with ?=, which lets you to override WARNS.
Reported by: <marius@nuenneri.ch> and uqs@
|
202603 |
18-Jan-2010 |
wkoszek |
Include unistd.h for read(), write() and stdlib.h for exit(). Bump WARNS to 5 while being here.
|
202602 |
18-Jan-2010 |
wkoszek |
Small cleanup while being here: - sort includes - remove usage(), since it seems to come from older version of the KLD - remove unnecessary variable - mark argc/argv as unused
Bring WARNS = 5 to the Makefile.
|
202601 |
18-Jan-2010 |
wkoszek |
Include stdlib.h for exit(3) and unistd.h for syscall(2). This makes this program to compile cleanly.
|
202600 |
18-Jan-2010 |
wkoszek |
Small fix for making this KLD to compile.
|
201213 |
29-Dec-2009 |
trasz |
Remove examples for pppd and SLIP-related stuff.
|
200771 |
21-Dec-2009 |
ru |
Removed one more Alpha leftover.
|
200440 |
12-Dec-2009 |
antoine |
Install firmware(9) examples.
MFC after: 1 month
|
198934 |
04-Nov-2009 |
delphij |
Cleanup code to make it WARNS=6 clean:
- ANSIfy prototypes; - Add __unused for parameters that is not being currently used; - Add a header for subrountines being called from other modules.
Reviewed by: mjacob
|
198929 |
04-Nov-2009 |
delphij |
Include string.h for prototype of strcmp().
|
197333 |
19-Sep-2009 |
mjacob |
Tell about the full name we opened, not the unit.
Obtained from: Sean Bruno MFC after: 1 month
|
196955 |
07-Sep-2009 |
sbruno |
A few enhancements I made while working on the Firewire target (sbp_targ).
Update the error handling in a couple of cases to exit gracefully if certain mandatory conditions aren't met.
Reduce the maximum number of initiators to 8 for this example code. While 1024 is more correct, this example code would act like it was stalled out even though it was merely allocating the needed structures in init_ccbs()
Reviewed by: scottl@freebsd.org
|
196515 |
24-Aug-2009 |
kensmith |
Update example for RELENG_8.
|
193374 |
03-Jun-2009 |
pjd |
Where if not in examples we should follow style(9)?
|
192799 |
26-May-2009 |
brian |
Mention the danger of running programs using ``!''.
PR: 112481 MFC after: 1 week
|
187146 |
13-Jan-2009 |
trhodes |
Fix broken URL and use the same base directory as the example files.
PR: 123035 Submitted by: Lawrence Mayer <lawmay3@i12.com> (original version)
|
183495 |
30-Sep-2008 |
kib |
Add unistd.h to the getosreldate(3) manpage. Update referenced example to include unistd.h per manpage. Update example to be more style(9)-ish, silence warnings and add FreeBSD id to the source file.
|
183416 |
27-Sep-2008 |
ed |
Also use dev2unit() in the pseudo-driver example script.
Because I'm planning on MFC'ing my last change to this file, make sure we use dev2unit() here as well.
|
183272 |
22-Sep-2008 |
ed |
Make the make_pseudo_driver.sh shellscript work again.
It seems this script was broken because of the SYSINIT changes and a rather awkward variable initialisation. For some reason the make_device_driver.sh script is also broken, related to BUS_SETUP_INTR. I have no experience with FreeBSD's interrupt handling, so I hope someone else is willing to take a look at that shell script.
PR: misc/126435 MFC after: 1 month
|
180208 |
03-Jul-2008 |
peter |
Set magic fbsd:nokeywords property that allows files to bypass keyword expansion. (file-specific replacement for CVSROOT/exclude)
|
180207 |
03-Jul-2008 |
peter |
Set magic property that allows files to bypass keyword expansion. Test commit to make sure it isn't exported to cvs.
|
179315 |
26-May-2008 |
bz |
Remove ISDN4BSD (I4B) from HEAD as it is not MPSAFE and parts relied on the now removed NET_NEEDS_GIANT. Most of I4B has been disconnected from the build since July 2007 in HEAD/RELENG_7.
This is what was removed: - configuration in /etc/isdn - examples - man pages - kernel configuration - sys/i4b (drivers, layers, include files) - user space tools - i4b support from ppp - further documentation
Discussed with: rwatson, re
|
179308 |
25-May-2008 |
rwatson |
Remove netatm from HEAD as it is not MPSAFE and relies on the now removed NET_NEEDS_GIANT. netatm has been disconnected from the build for ten months in HEAD/RELENG_7. Specifics:
- netatm include files - netatm command line management tools - libatm - ATM parts in rescue and sysinstall - sample configuration files and documents - kernel support as a module or in NOTES - netgraph wrapper nodes for netatm - ctags data for netatm. - netatm-specific device drivers.
MFC after: 3 weeks Reviewed by: bz Discussed with: bms, bz, harti
|
178842 |
07-May-2008 |
attilio |
Add a new awk script which parses informations returned by the newly added sysctl debug.witness.graphs and returns all the graphs involving Giant lock creating an appropriate script in DOT format which can be plotted immediately.
Submitted by: Michele Dallachiesa <michele dot dallachiesa at poste dot it>
|
177158 |
13-Mar-2008 |
edwin |
Add projects-all collection to cvs-supfile
PR: misc/121680 Submitted by: "Philip M. Gollucci" <pgollucci@p6m7g8.com> Approved by: grog@ (mentor) MFC after: 1 week
|
174414 |
07-Dec-2007 |
gabor |
- Add doc/hu_* and doc/mn_* to the refuse examples so that include all of the currently used languages
PR: docs/118476 (related) Submitted by: Chess Griffin <chess@chessgriffin.com> MFC after: 3 days
|
174413 |
07-Dec-2007 |
gabor |
- Add doc/hu_* and doc/mn_* to the sample refuse file so that it includes all of the languages
PR: docs/118476 Submitted by: Chess Griffin <chess@chessgriffin.com> MFC after: 3 days
|
173536 |
11-Nov-2007 |
mlaier |
Update pf examples from OpenBSD to catch up with new stateful defaults and other syntax changes. Move pf.conf from /etc to examples, too.
|
172531 |
11-Oct-2007 |
kensmith |
To honor the birth of RELENG_7 bump HEAD to 8.0-CURRENT.
Approved by: re (implicit)
|
172083 |
07-Sep-2007 |
gabor |
- Remove info about the consumed space in base dir. This info is not relevant any more.
PR: docs/115335 Submitted by: Wayne Sierke <ws@au.dyndns.ws> Reviewed by: keramida Approved by: re (bmah) MFC after: 3 days
|
171536 |
22-Jul-2007 |
kevlo |
Include the <sys/sysproto.h> header which includes the prerequisite header for AUE_NULL.
Approved by: re (kensmith)
|
171453 |
14-Jul-2007 |
rwatson |
Disconnect netatm from the build as it is not MPSAFE and relies on NET_NEEDS_GIANT, which will shortly be removed. This is done in a away that it may be easily reattached to the build before 7.1 if appropriate locking is added. Specifics:
- Don't install netatm include files - Disconnect netatm command line management tools - Don't build libatm - Don't include ATM parts in rescue or sysinstall - Don't install sample configuration files and documents - Don't build kernel support as a module or in NOTES - Don't build netgraph wrapper nodes for netatm
This removes the last remaining consumer of NET_NEEDS_GIANT.
Reviewed by: harti Discussed with: bz, bms Approved by: re (kensmith)
|
171272 |
06-Jul-2007 |
bz |
I4B header files are now installed in include/i4b/ and no longer in include/machine/.
Adapt #include paths.
Approved by: re (kensmith)
|
169782 |
19-May-2007 |
flz |
Add new x11-drivers category.
MFC after: 3 days
|
169026 |
24-Apr-2007 |
emax |
Retire /usr/share/examples/netgraph/bluetooth/rc.bluetooth.
MFC after: 1 week
|
168717 |
14-Apr-2007 |
ru |
Add ports-net-im, ports-net-p2p and ports-ports-mgmt collections.
|
168716 |
14-Apr-2007 |
ru |
Add src-cddl and src-rescue.
|
166369 |
31-Jan-2007 |
pav |
- Add ports-ports-mgmt collection
|
166069 |
17-Jan-2007 |
des |
On i386, make "prescott" an alias for "nocona" (instead of the other way around), and introduce "core", along with the alias "core2". All of these enable SSE3.
On amd64, add "core2" (enables SSE3).
MFC after: 3 weeks
|
163495 |
19-Oct-2006 |
imp |
Remove references to pccard.conf, it is no longer used.
|
162712 |
27-Sep-2006 |
danger |
Revert my previous change as it does not seem to be entirely correct and popular.
|
162704 |
27-Sep-2006 |
mjacob |
Bump MAX_INITIATORS to 1024- the LSI-Logic can go even higher than this for 'initiator id'- this is a stopgap until a sparse map is added.
Make compat defines for offset format (FreeBSD 5 or less).
Add no-asyncio flag. There's some breakage with ASYNC I/O that every now and then drops us into an infinite loop. This also then does a fallback to no-asyncio if the AIO option isn't loaded/compiled into the kernel.
A number of other chanes to try and track some breakage.
|
162692 |
27-Sep-2006 |
pjd |
- Use existing functions mtx_lock() and mtx_unlock(). - Change variable name to 'error', as this is what is mostly used for functions that return an error. - Add mutex(9) to the SEE ALSO section. - Bump the date.
I don't really like the example code. I'd prefer symmetry where possible, eg.
mtx_lock(&example_lock); error = example(NULL, EXAMPLE_ONE); mtx_unlock(&example_lock); if (error != 0) return (error);
But I'll leave it as it is for now.
Reviewed by: simon
|
162670 |
26-Sep-2006 |
danger |
Remove second person from the sentece and rephrase a bit.
Approved by: trhodes (mentor), keramida (mentor)
|
162403 |
18-Sep-2006 |
ru |
Fix wording to what I intended originally.
|
162396 |
18-Sep-2006 |
ru |
- Avoid using second person. - Demonstrate how .Nm can be used without the side effect of causing a line break in the SYNOPSIS section.
|
162276 |
13-Sep-2006 |
ru |
- Change the example CFLAGS entry to match our default in sys.mk. - Document that -fno-strict-aliasing is required for -O2.
Prodded by: users of stable@
|
161559 |
23-Aug-2006 |
rik |
Fix path for source file in files.FOO.
|
161139 |
09-Aug-2006 |
rik |
- Added ability to provide (optional) path to the kernel sources - Added check of dirs used by example generator - Fixed path for ${s}/conf/files.FOO and include it via files directive from config file - Changed kernel configuration example with the driver: it is not produced by copying Generic but by including it - KDB is added to config (for DDB) - Added module building instead and fixed kernel building
Reviewed by: julian@
|
161137 |
09-Aug-2006 |
rik |
Added copyright templete Fixed compilation
Reviewed by: julian@
|
161118 |
09-Aug-2006 |
rik |
- Added 'files "files.FOO"' to config for inclusion of user specific files. - Added KDB option to config file (for DDB). - Added ability to compile custom kernel.
Discussed with: julian@
|
161023 |
06-Aug-2006 |
rik |
- Added ability to provide (optional) path to the kernel sources - Fixed path for ${s}/conf/files.FOO and a note that it should be merged into corresponding file to be able to compile the kernel - Changed kernel configuration example with the driver: it is not produced by copying Generic but by including it - Changed from automatic module building to asking an user if it whants to
Reviewed by: julian@
|
161022 |
06-Aug-2006 |
rik |
Fix compilation.
Reviewed by: julian@
|
160497 |
19-Jul-2006 |
des |
Add CPUTYPE support for Via C3 and C3-2 processors.
MFC after: 2 weeks
|
159175 |
02-Jun-2006 |
motoyuki |
doc fix: option MFS is obsolete. use MD_ROOT instead.
PR: conf/93878
|
158763 |
20-May-2006 |
brueffer |
Make this example more real world usable: When the manpage first appeared is not interesting, when the driver appeared is. Most people who use this example leave the manpage appearance date in and the driver date out.
MFC after: 3 days
|
158751 |
19-May-2006 |
sobomax |
We don't have d_maj field in cdevsw structure anymore.
|
158657 |
16-May-2006 |
matteo |
Close a "(" I left open.
|
158604 |
15-May-2006 |
matteo |
Update README.examples according to the current state of the examples/etc directory
PR: conf/97232
|
157670 |
11-Apr-2006 |
mjacob |
If we end up with a CTIO completing with CAM_REQUEUE_REQ, be obliging and just redo the request instead of squawking and dying.
|
157356 |
01-Apr-2006 |
brueffer |
Add a standard boilerplate to the SYNOPSIS section that mentions how to load a kernel module.
MFC after: 3 days
|
157129 |
25-Mar-2006 |
mjacob |
Move the check for non-ATIO_CMD ahead of the cache chech so that completion for unsupported commands doesn't abort.
Reviewed by: nate MFC after: 2 weeks
|
157009 |
22-Mar-2006 |
mjacob |
Make scsi_target actually compile after a structure member change.
Obtained from: Either Scott, Nate, Ken or A. Nagy
|
156981 |
22-Mar-2006 |
mjacob |
At least respond to REPORT LUNS with an ILLEGAL COMMAND response.
This keeps us from dumping core when modern OS' like Windows and Linux see us.
|
156941 |
21-Mar-2006 |
ru |
Remove mentions of old compat options from here; equivalents are now provided in src.conf(5).
|
156887 |
19-Mar-2006 |
mux |
Also refer to csup in the example SUP setting.
|
156813 |
17-Mar-2006 |
ru |
Reimplementation of world/kernel build options. For details, see:
http://lists.freebsd.org/pipermail/freebsd-current/2006-March/061725.html
The src.conf(5) manpage is to follow in a few days.
Brought to you by: imp, jhb, kris, phk, ru (all bugs are mine)
|
156733 |
15-Mar-2006 |
ru |
Style.
|
156313 |
05-Mar-2006 |
schweikh |
- Correct grammos in comments and end them with full stops. - Use "if !" instead of empty true branches. - Don't hardcode script name in usage message, use $0 instead. - Cleanup some whitespace.
|
156190 |
01-Mar-2006 |
ru |
Remove NO_OBJ now that this makefile builds something.
Noticed by: Andrzej Tobola
|
156083 |
27-Feb-2006 |
ru |
Fix a botched commit that broke world.
|
156061 |
27-Feb-2006 |
darrenr |
Add a man page for mkfilters(1) and put the corrected perl script in the ipfilter usr/share directory
PR: docs/26879
|
155893 |
22-Feb-2006 |
ume |
Mention NO_NLS_CATALOGS.
|
155703 |
14-Feb-2006 |
sam |
Change default build of wpa_supplicant to include EAPOL support; ENABLE_WPA_SUPPLICANT_EAPOL is no more, now use NO_WPA_SUPPLICANT_EAPOL to build with only WPA-PSK support.
Reviewed by: ru, bsdimp (basic approach) MFC after: 1 week
|
155585 |
12-Feb-2006 |
brueffer |
Document NO_AUDIT.
Obtained from: TrustedBSD Project
|
154974 |
29-Jan-2006 |
mlaier |
firmware(9) is a subsystem to load binary data into the kernel via a specially crafted module. There are several handrolled sollutions to this problem in the tree already which will be replaced with this. They include iwi(4), ipw(4), ispfw(4) and digi(4).
No objection from: arch MFC after: 2 weeks X-MFC after: some drivers have been converted
|
154951 |
28-Jan-2006 |
pav |
- Add ports-net-p2p collection
|
153430 |
15-Dec-2005 |
iedowse |
Remove usbd(8) and all references to it. It is no longer necessary since devd(8) now provides the same functionality.
Submitted by: Anish Mistry
|
153291 |
10-Dec-2005 |
ru |
Adopt for modern FreeBSD.
Requested by: az
|
152852 |
27-Nov-2005 |
keramida |
Clarify a comment to make it clear that it is NO_NIS that "If it is set" refers to and add extra '#' comment characters at the beginning of two lines that started with TABs, to avoid warnings like:
"/etc/make.conf", line 128: Unassociated shell command "# If set, you might need to adopt your" "/etc/make.conf", line 129: Unassociated shell command "# nsswitch.conf(5) and remove `nis' entries."
PR: misc/89423 Submitted by: Scot W. Hetzel
|
152229 |
09-Nov-2005 |
pav |
Add new ports-net-im collection.
|
151702 |
26-Oct-2005 |
jhb |
Spell 'argument' correctly.
Submitted by: Andre Guibert de Bruet andy at siliconlandmark dot com
|
151592 |
23-Oct-2005 |
maxim |
s/RADUIS/RADIUS/
Submitted by: jisakiel@yahoo.es MFC after: 1 week
|
151552 |
22-Oct-2005 |
trhodes |
A better, more correct explination of NO_SHARED. This could probably use a quick touch up, but at least it's correct.
Requested by: ru
|
151421 |
17-Oct-2005 |
bz |
Document that changes to nsswitch.conf might be needed when compiling with NO_NIS. [ also see make.conf(5) and nsswitch.conf(5) ]
Reviewed by: ru Requested by: dougb (and bin/87221) MFC: 22 days
|
151327 |
14-Oct-2005 |
ru |
Remove redundant (in FreeBSD) include.
|
150034 |
12-Sep-2005 |
kensmith |
Update for RELENG_6.
Pointed out by: Many on current@. MFC after: 1 day
|
149813 |
06-Sep-2005 |
obrien |
Remove WANT_FORCE_OPTIMIZATION_DOWNGRADE and out dated warnings about libalias(3) exposing compiler bugs.
|
147840 |
08-Jul-2005 |
sam |
document ENABLE_WPA_SUPPLICANT_EAPOL
Approved by: re (scottl)
|
147069 |
07-Jun-2005 |
maxim |
Finish adding _dhcp user.
|
146001 |
08-May-2005 |
des |
The Nocona may be AMD64 compatible, but it is still an Intel part.
Pointy hat to: trhodes MFC after: 1 week
|
145982 |
07-May-2005 |
brueffer |
Join two lines.
|
145964 |
06-May-2005 |
pjd |
Document 'pentium-m' CPUTYPE.
|
145256 |
19-Apr-2005 |
jkoshy |
Bring a working snapshot of hwpmc(4), its associated libraries, userland utilities and documentation into -CURRENT.
Bump FreeBSD_version.
Reviewed by: alc, jhb (kernel changes)
|
145210 |
17-Apr-2005 |
iedowse |
Correct a comment about which parallel port pin is used to drive the RS signal.
PR: misc/20139
|
145003 |
13-Apr-2005 |
phk |
Add NO_DICT handle. Saves almost 3.5 MB installed.
|
143943 |
21-Mar-2005 |
le |
Typo.
|
143636 |
15-Mar-2005 |
maxim |
o Add missed language doc subdirectories, sort.
PR: docs/78859 Submitted by: skv
|
143320 |
09-Mar-2005 |
stefanf |
Device counts are gone.
|
143316 |
09-Mar-2005 |
stefanf |
__FUNCTION__ -> __func__
|
142973 |
02-Mar-2005 |
trhodes |
Add NO_RCMDS to the list.
|
142499 |
25-Feb-2005 |
trhodes |
Resort the CPU list with regards to recently added CPUs.
Prodded by: glewis
|
142279 |
23-Feb-2005 |
trhodes |
Fix up previous commit by adding prescott and itanium2 CPUs.
Submitted by: marcel
|
142274 |
23-Feb-2005 |
trhodes |
Add 'nocona' to the list of Intel ia64 CPUs and k8 to the AMD CPUs.
Replace -fmemoize-lookups -fsave-memoized with a working example, -fconserve-space. To quote part of the GCC docs on this option:
"Put uninitialized or runtime-initialized global variables into the common segment, as C does."
MFC after: 2 days Submitted by: Daniel Gerzo <danger@rulez.sk> (original version)
|
141580 |
09-Feb-2005 |
ru |
Fixed the misplaced $FreeBSD$.
|
141404 |
06-Feb-2005 |
phk |
Document NO_GPIB
|
141395 |
06-Feb-2005 |
delphij |
Document NO_NETCAT.
|
140561 |
21-Jan-2005 |
ru |
Sort sections.
|
140546 |
21-Jan-2005 |
wes |
Document the shiny new WITHOUT_MODULES knob in make.conf.
PR: kern/76225 Prodded by: ru@, brueffer@ MFC after: 2 weeks
|
140363 |
16-Jan-2005 |
ru |
Added the EXIT STATUS section.
|
140302 |
15-Jan-2005 |
jkoshy |
Move the LOCKING section to before the EXAMPLES section. Make example locking calls in the EXAMPLES section.
Reviewed by: keramida
|
140139 |
12-Jan-2005 |
keramida |
A few more mdoc fixes I missed in the suggestions of Ruslan.
|
140135 |
12-Jan-2005 |
keramida |
Cross-reference the newly added example.9
|
140134 |
12-Jan-2005 |
keramida |
Link mdoc/example.9 to the build.
|
140133 |
12-Jan-2005 |
keramida |
Add a sample manpage for section 9.
Suggested by: simon Reviewed by: ru
|
139992 |
10-Jan-2005 |
ru |
Forgot to submit a fixed version of this script to Simon.
|
139989 |
10-Jan-2005 |
simon |
Add support files for using text from the POSIX specification in FreeBSD manual pages:
- POSIX-copyright contains copyright text to be used in manual pages which has POSIX text inserted. - deshallify.sh is a shell script which removes many of the ``shall'' statements from the POSIX text and therefore making the text more readable.
Real work to make this happen by: nectar, ru
|
139970 |
10-Jan-2005 |
ru |
Unbreak the install.
|
139945 |
09-Jan-2005 |
trhodes |
Remove the meteor helper files, imp removed the driver and manual page over a year ago.
|
139125 |
21-Dec-2004 |
ru |
NOIPSEC -> TRACEROUTE_NO_IPSEC
|
139120 |
21-Dec-2004 |
ru |
NOSHARE -> NO_SHARE
|
139118 |
21-Dec-2004 |
ru |
Overhaul ppp(8) build options so they are safe to use in /etc/make.conf:
NOALIAS -> retired (support provided by PPP_NO_NAT) NOATM -> PPP_NO_ATM (also subject to NO_ATM global) NODES -> PPP_NO_DES (support was broken, now recovered) NOI4B -> PPP_NO_I4B (also subject to NO_I4B global) NOKLDLOAD -> PPP_NO_KLDLOAD NONAT -> PPP_NO_NAT NONETGRAPH -> PPP_NO_NETGRAPH NOPAM -> PPP_NO_PAM (will be subject to NO_PAM global) NORADIUS -> PPP_NO_RADIUS NOSUID -> retired (support provided by PPP_NO_SUID) PPP_NOSUID -> PPP_NO_SUID
|
139115 |
21-Dec-2004 |
ru |
NOINET6 -> NO_INET6
|
139114 |
21-Dec-2004 |
ru |
NOGAMES -> NO_GAMES
|
139113 |
21-Dec-2004 |
ru |
NOCRYPT -> NO_CRYPT
|
139112 |
21-Dec-2004 |
ru |
NOSHARED -> NO_SHARED
|
139106 |
21-Dec-2004 |
ru |
NODOCCOMPRESS -> NO_DOCCOMPRESS NOINFO -> NO_INFO NOINFOCOMPRESS -> NO_INFOCOMPRESS NOLINT -> NO_LINT NOPIC -> NO_PIC NOPROFILE -> NO_PROFILE
|
139105 |
21-Dec-2004 |
ru |
NOATM -> NO_ATM
|
139104 |
21-Dec-2004 |
ru |
NOLIBC_R -> NO_LIBC_R NOLIBPTHREAD -> NO_LIBPTHREAD NOLIBTHR -> NO_LIBTHR
|
139103 |
21-Dec-2004 |
ru |
Start the dreaded NOFOO -> NO_FOO conversion.
OK'ed by: core
|
139028 |
19-Dec-2004 |
brueffer |
Nuke ports-picobsd, it was thrown out a while ago.
Approved by: linimon MFC after: 3 days
|
138896 |
15-Dec-2004 |
trhodes |
Commit patch from ru which groups the ppp(8) options together and kills my sorting.
Submitted by: ru Discussed with: imp
|
138875 |
15-Dec-2004 |
trhodes |
Add a few options with regards to ppp(8) and traceroute. Sort the list, please keep this list sorted.
PR: 48569
|
138815 |
13-Dec-2004 |
brian |
Add ``enable echo''.
|
137892 |
19-Nov-2004 |
obrien |
Catch up with PHK's sio(4) cuaa->cuad rework [sys/dev/sio/sio.c rev. 1.456].
|
137882 |
19-Nov-2004 |
obrien |
Catch up with PHK's sio(4) cuaa->cuad rework [sys/dev/sio/sio.c rev. 1.456].
|
137675 |
13-Nov-2004 |
bz |
Add knob NO_NIS (fka NO_YP_LIBC) and make world compileable when set. If turned on no NIS support and related programs will be built.
Lost parts rediscovered by: Danny Braniss <danny at cs.huji.ac.il> PR: bin/68303 No objections: des, gshapiro, nectar Reviewed by: ru Approved by: rwatson (mentor) MFC after: 2 weeks
|
137201 |
04-Nov-2004 |
phk |
Remove references to NO_VINUM
|
137134 |
02-Nov-2004 |
emax |
Serial devices now called /dev/cuadXX not /dev/cuaaXX
|
136914 |
24-Oct-2004 |
ru |
For variables that are only checked with defined(), don't provide any fake value.
|
136910 |
24-Oct-2004 |
ru |
For variables that are only checked with defined(), don't provide any fake value.
|
136908 |
24-Oct-2004 |
ru |
There's no such knob as WERROR.
|
136859 |
24-Oct-2004 |
scottl |
Update for 5-STABLE.
|
136608 |
17-Oct-2004 |
obrien |
Catch up with share/mk/bsd.cpu.mk revision 1.43.
|
136551 |
15-Oct-2004 |
ru |
Overdue removal of COMPAT* knobs.
|
136242 |
08-Oct-2004 |
dougb |
1. Incorporate most of Ruslan's improvements to where and how the /etc/namedb symlink is created.
2. Incorporate Brian's suggestion to make the link relative. This is necessary to handle situations (such as mergemaster) where the user is building a tree in a seperate environment. This will also fix the problem with the way DESTDIR is set in 'make release'.
3. Add a new knob, NO_BIND_MTREE, as suggested by the folks who already have stuff in /var/named that they don't want me to mess with.
4. Update make.conf(5) with the new stuff, and correct a few paths that have changed since I last updated it.
|
135851 |
27-Sep-2004 |
dougb |
1. Add much finer granularity to the NO_BIND knobs with the addition of: NO_BIND_DNSSEC, NO_BIND_ETC, NO_BIND_NAMED, and NO_BIND_UTILS.
2. Make creation of directories in /usr/include that are only needed in the WITH_BIND_LIBS case conditional.
Reviewed by: ru, des
|
135814 |
26-Sep-2004 |
ru |
Get rid of obsolete MAN[0-9] syntax.
|
135752 |
24-Sep-2004 |
dougb |
Fix the WANT_BIND_LIBS knob by correctly spelling it as WITH_BIND_LIBS to match how similar syntax is used in the ports system. Thanks to kris for pointing out my mistake here.
Install the lwres library unless the user defines NO_BIND, or the new knob, NO_BIND_LIBS_LWRES. There is at least one potential customer for this library in the wings. Thanks to nectar for the reminder.
|
135740 |
24-Sep-2004 |
dougb |
Break the NO_BIND knob out from the pack, and begin documenting the finer granularity for the various BIND features.
|
135639 |
23-Sep-2004 |
brooks |
Backout the hack to install mtree, newsyslog, and touch in the cloned root in the previous commit. We'll fix /etc/rc.d/var directly (someday).
|
135620 |
23-Sep-2004 |
brooks |
Hack around the fact that the current diskless scripts require some binaries in /usr before /usr is mounted by copying those files to the root.
Stop making devices. devfs is manditory.
|
135184 |
14-Sep-2004 |
mlaier |
Bring in some examples (and create space for future work here): - Add OpenBSD example rulesets as advertised in etc/pf.conf and pf.conf(5) - Tweak the pointer to fit the FreeBSD default location share/examples/pf - Account for the new directory in BSD.usr.dist (no hier(7) change required as share/examples is an opaque item there).
Obtained from: OpenBSD Reminded by: Thomas T. Veldhouse PR: docs/71691 MFC after: 2 days
|
134969 |
09-Sep-2004 |
alfred |
Plug an fd leak by using autoh_freeall(3). Refuse to run unless root. Check in /etc, /usr/local/etc and ./ for the "autotab" configuration file. Add more debug statements.
|
134940 |
08-Sep-2004 |
alfred |
sync with private code:
fix a 5.x'ism that 4.x needs protection from. make this code compile standalone.
|
134753 |
04-Sep-2004 |
brueffer |
Document a couple of build knobs
PR: misc/71032 (partly) Submitted by: Divacky Roman <xdivac02@stud.fit.vutbr.cz> Reviewed by: ru MFC after: 3 days
|
134576 |
31-Aug-2004 |
alfred |
Enter the autofs.
|
134520 |
30-Aug-2004 |
pjd |
According to module(9), when command is unrecognized, the module should return EOPNOTSUPP.
|
134007 |
19-Aug-2004 |
des |
Add a NO_BOOT knob to prevent building the boot blocks and loader.
Reviewed by: ru MFC after: 3 days
|
133944 |
18-Aug-2004 |
simon |
Add a HARDWARE section to the example section 4 manual page.
Reviewed by: ru MFC after: 3 days
|
133769 |
15-Aug-2004 |
marius |
Shorten the description of NO_OPENSSL, which was split into two lines by a patch of mine in revision 1.216, a bit so it fits in a single line again.
|
133651 |
13-Aug-2004 |
ru |
Removed COPTS with equivalent CFLAGS. While here, fixed setting of BINDIR.
|
133476 |
11-Aug-2004 |
harti |
Document the correct use of MAKEOBJDIRPREFIX and MAKEOBJDIR.
Requested by: kris
|
132878 |
30-Jul-2004 |
ru |
Update to the 2004 Edition of POSIX.
|
132830 |
29-Jul-2004 |
ru |
Removed remnants of ports-related knobs from here.
|
132247 |
16-Jul-2004 |
tjr |
Update for struct cdevsw and dev_t -> struct cdev * changes, plus one 64-bit portability fix.
|
132211 |
15-Jul-2004 |
scottl |
Move references to the recently removed worm directory.
|
132183 |
15-Jul-2004 |
murray |
Remove Walnut Creek CDROM script that Jordan wrote in the 90s. This functionality is largely in src/release/${ARCH}/mkisofs.sh now.
PR: docs/43569
|
131751 |
07-Jul-2004 |
ru |
Bumped document date for the recent changes here. Fixed bad example of how to start a new sentence. Added missing punctuation. Fixed cut-n-paste error in the STANDARDS section. Mention modern POSIX and C standards.
|
131530 |
03-Jul-2004 |
ru |
Mechanically kill hard sentence breaks and double whitespaces.
|
131522 |
03-Jul-2004 |
des |
The -O2 bugs are in libalias(3), not ppp(8).
|
131472 |
02-Jul-2004 |
ru |
Removed trailing whitespace.
|
131467 |
02-Jul-2004 |
des |
Explain that -O2 is supported, but known to expose bugs in ppp(8).
|
131343 |
30-Jun-2004 |
maxim |
Add user _pflogd.
|
131153 |
26-Jun-2004 |
pjd |
Typo.
|
130787 |
20-Jun-2004 |
mpp |
Spelling fixes.
|
130786 |
20-Jun-2004 |
mpp |
Spelling fixes.
|
130785 |
20-Jun-2004 |
mpp |
Spelling fix and add $ FreeBSD $ tag
|
130784 |
20-Jun-2004 |
mpp |
Grr. Fixup markup on my last commit. Sorry, I'm a little out of practice :)
|
130783 |
20-Jun-2004 |
mpp |
Sync up ERRORS section with errno.h.
|
130276 |
09-Jun-2004 |
maxim |
Style.
|
130272 |
09-Jun-2004 |
le |
Remove duplicate #include.
PR: misc/67748 Submitted by: bugghy <bugghy@phenix.rootshell.be>
|
129642 |
24-May-2004 |
cjc |
/usr is not really the ideal place for a ports application to store a frequently updated database. /var/db is a much more reasonable place for this kind of thing. Set a good example.
Reviewed by: -arch
|
129158 |
12-May-2004 |
josef |
Fix typo.
Submitted by: Michel Lavondès <fox@vader.aacc.cc.md.us> PR: docs/66536
|
129101 |
10-May-2004 |
simon |
Fix typos.
PR: docs/66481 Submitted by: Michel Lavondès <fox@vader.aacc.cc.md.us>
|
128927 |
04-May-2004 |
josef |
Add some lines to note that 'www' is available as an option to get the www tree.
|
127384 |
24-Mar-2004 |
des |
Remove mention of doscmd.
|
127234 |
20-Mar-2004 |
maxim |
o Add user proxy.
|
126756 |
08-Mar-2004 |
mlaier |
Link pf to the build and install: This adds the former ports registered groups: proxy and authpf as well as the proxy user. Make sure to run mergemaster -p in oder to complete make installworld without errors.
This also provides the passive OS fingerprints from OpenBSD (pf.os) and an example pf.conf.
For those who want to go without pf; it provides a NO_PF knob to make.conf.
__FreeBSD_version will be bumped soon to reflect this and to be able to change ports accordingly.
Approved by: bms(mentor)
|
126171 |
23-Feb-2004 |
marcus |
Add ports-net-mgmt to the relevant supfiles.
MFC after: 4 days
|
125500 |
05-Feb-2004 |
ru |
Added missing DPADD.
|
125429 |
04-Feb-2004 |
ru |
Fixed static build.
|
125392 |
03-Feb-2004 |
des |
Document NO_VINUM, which is already listed in the man page.
|
125151 |
28-Jan-2004 |
obrien |
Always build ext2fs module. There is no written policy preventing the building of GPL'ed modules.
|
125123 |
28-Jan-2004 |
emax |
Add NO_BLUETOOTH knob to the build process
Requested by: phk Reviewed by: imp (mentor), ru
|
124762 |
20-Jan-2004 |
marcus |
Add ports-accessibility and ports-x11-themes to the example supfiles.
|
124694 |
18-Jan-2004 |
obrien |
Remove verbage about -O2 producing bad code on Alpha. By all accounts GCC 3.3 -O2 produces correct code on Alpha. However, note that FreeBSD has alias bugs that make -O2 produce bad code on all(most?) platforms. Also don't tell people we don't want -O2 related bug reports, we do -- if they contain patches.
|
124676 |
18-Jan-2004 |
nyan |
Sync with sys/boot/forth/frames.4th revision 1.2 (PC98 support).
Suggested by: matusita
|
124309 |
09-Jan-2004 |
njl |
Note that REPORT_LUNS should be implemented to work better with Linux and Windows as initiators.
|
124308 |
09-Jan-2004 |
njl |
Enable autosense by default. This shouldn't hurt SPI and is required for FC.
|
124307 |
09-Jan-2004 |
njl |
Bump the max number of initiators to 256 from 16. This is appropriate for fibre channel and shouldn't hurt SPI.
|
123288 |
08-Dec-2003 |
obrien |
Move the bktr(4) <arch>/include/ioctl_{bt848,meteor}.h files to dev/bktr as these ioctl's aren't MD. This also means they are installed in /usr/include/dev/bktr now. Also provide compatability wrappers for where these headers lived in 4.x.
|
122805 |
16-Nov-2003 |
ceri |
Add the ports/arabic category to the examples.
MFC After: 4 days
|
122758 |
15-Nov-2003 |
harti |
Replace all uses of the old netgraph constants NG_*LEN by the new constants NG_*SIZ that include the trailing NUL byte. This change is mostly mechanical except for the replacement of a couple of snprintf() and sprintf() calls with strlcpy.
|
122311 |
08-Nov-2003 |
gshapiro |
People are blindly coping this example refuse file. Doing so breaks buildworld as src/etc/sendmail/freebsd.mc is missing. That example was added 3 years ago, before the /etc/mail/ infrastructure was in place for customized configurations. It is time to remove this example.
Noticed by: Robert Gray <bob@boulderlabs.com> in freebsd-stable MFC after: 1 day
|
121580 |
26-Oct-2003 |
emax |
Connect /etc/bluetooth and /usr/share/examples/netgraph/bluetooth to the build.
Reviewed by: imp, simon Approved by: imp (mentor)
|
121184 |
18-Oct-2003 |
simokawa |
- Enable 16byte commands. - Fix printf warnings on 64bit architectures. - Accept 'k', 'm' and etc. for -s option.
Reviewed by: njl
|
120708 |
03-Oct-2003 |
dds |
Style fixes: shell script indentation, if/then style, plus a lot of comments in C code (capitalized, end with full stop).
Submitted by: schweikh
|
120707 |
03-Oct-2003 |
dds |
Create a driver that will compile without warnings on -CURRENT More changes are probably needed to create a correct driver.
Reviewed by: markm Approved by: schweikh (mentor)
|
120612 |
30-Sep-2003 |
julian |
fix typos in comments. Submitted by: Vincent Jardin <vjardin@wanadoo.fr>
|
120428 |
25-Sep-2003 |
simokawa |
* scsi_cmds.c - Fill in autosense data. - Add compatibility for RELENG_4.
* scsi_target.c - Raw device support - Set correct value in c_descr->offset for CAM_DIR_NONE case. - Support for CTIO abort.
|
120397 |
24-Sep-2003 |
gshapiro |
Turn SENDMAIL_CF_DIR into an officially supported make.conf variable and use it in src/etc/sendmail/Makefile in case the user wants to use a different path to the sendmail m4 sources (e.g., sendmail port users).
Submitted by: dinoex MFC after: 21 days X-MFC after: RELENG_4 code freeze ends
|
120190 |
18-Sep-2003 |
eivind |
Update comment about compression to refer to CPU limitations instead of T1s
|
120094 |
15-Sep-2003 |
nectar |
Remove nsswitch.conf from the list of examples, because there is no such example.
Reported by: blackend
|
120054 |
14-Sep-2003 |
ru |
Get rid of duplicates.
|
120005 |
12-Sep-2003 |
ceri |
Using prefix=/usr will put these files in /usr/gnats, not /usr/ports.
|
120002 |
12-Sep-2003 |
ceri |
Add the ports/dns and ports/polish categories.
|
119893 |
08-Sep-2003 |
ru |
mdoc(7): Use the new feature of the .In macro.
|
119833 |
07-Sep-2003 |
jmg |
make sure we really don't have a tty when installing rules. This prevents a flush command from asking a question (you can't see): If there is no tty associated with the process, this is implied.
MFC after: 1 day
|
118576 |
07-Aug-2003 |
imp |
getopt returns -1 not EOF at the end of args. Compare against that.
|
118385 |
03-Aug-2003 |
mbr |
Fix the cdev kld example.
PR: 52954 Submitted by: Priit Piipuu <priit.piipuu@mail.ee> Reviewed by: phk
|
117290 |
06-Jul-2003 |
gshapiro |
Thanks to Ruslan's src/etc/sendmail/Makefile patch, it is now safe (though probably not a good idea in general) to set the various SENDMAIL_*_MC variables to /etc/mail/sendmail.mc or /etc/mail/submit.mc.
MFC after: 5 days
|
115219 |
21-May-2003 |
ru |
Unbreak world build if NO_OPENSSL is defined but NO_KERBEROS is not.
Submitted by: Marius Strobl <marius@alchemy.franken.de> Approved by: re (jhb)
|
115157 |
19-May-2003 |
des |
Retire the useless NOSECURE knob.
Approved by: re (scottl)
|
114880 |
10-May-2003 |
julian |
This file just didn't want to commit in the last batch of bluetooth files. Approved by: re@
|
114782 |
06-May-2003 |
obrien |
Consistentify our NO_KERBEROS documentation.
Approved by: re(bmah)
|
114709 |
05-May-2003 |
markm |
Turn MAKE_KERBEROS5 into NO_KERBEROS by negating the logic. Some extra cleanups were necessary in release/Makefile, and the tinderbox code was syntax checked, not run checked.
|
114157 |
28-Apr-2003 |
maxim |
xten has gone.
|
113346 |
10-Apr-2003 |
keramida |
Quote authname and authkey. Some ISPs allow (or even require) non-alphanumeric characters in these and this will be a hint to the users that quotes can and should be used in such cases.
PR: docs/42292 Submitted by: Matthias Andree <matthias.andree@web.de> MFC after: 1 week
|
112651 |
26-Mar-2003 |
keramida |
Add missing Danish (doc/da_*) language doc subdirectory
PR: docs/50290 Submitted by: Sergei Kolobov <sergei@kolobov.com>
|
112612 |
25-Mar-2003 |
brueffer |
Remove reference to MAKEDEV
|
111989 |
08-Mar-2003 |
markm |
KerberosIV deorbit sequence: MAKE_KERBEROS4 is no longer a valid option.
|
111875 |
04-Mar-2003 |
peter |
Add cvsroot-all to the example
|
110882 |
14-Feb-2003 |
trhodes |
Move NOMAN down the section without underscore characters. Add a forgotten `=' sign.
Thanks to: ru, bde
|
110792 |
13-Feb-2003 |
brueffer |
Various spelling and grammar fixes
PR: 44312 Submitted by: Chris Pepper <pepper@rockefeller.edu> MFC after: 3 days
|
110724 |
11-Feb-2003 |
trhodes |
Add NOMAN here also.
|
110655 |
10-Feb-2003 |
nectar |
Install the OpenSSL man pages in /usr/share/openssl/man and remove the WANT_OPENSSL_MANPAGES knob.
|
110407 |
05-Feb-2003 |
alex |
Remove MAKEDEV quirks, now obsolete.
|
110198 |
01-Feb-2003 |
schweikh |
Catch up with new categories and note that ports-base is essential without ports-all.
PR: 47774 Submitted by: Sergei Kolobov <sergei@kolobov.com> MFC after: 3 days
|
110197 |
01-Feb-2003 |
schweikh |
Add new categories hungarian and portuguese.
PR: 47772 Submitted by: Sergei Kolobov <sergei@kolobov.com> MFC after: 3 days
|
110026 |
29-Jan-2003 |
obrien |
Document WANT_EXT2FS_MODULE.
|
109345 |
16-Jan-2003 |
njl |
kernel: * Fix a bug where devices weren't cleaned up on close(): CAM_REQ_CMP != 0
user: * Increase timeout in usermode to CAM_TIME_INFINITY. The initiator is in charge of timeouts and the value was in ms, not seconds. * Bring two debugging printfs under the debug flag * Clean up man page to show increased testing on isp(4)
Submitted by: gibbs (bugfixes)
|
109161 |
13-Jan-2003 |
njl |
Add check for AIO support before starting up.
|
108827 |
06-Jan-2003 |
trhodes |
Major update to the refuse file.
PR: 44164 Submitted by: Sergei Kolobov <sergei@kolobov.com>
|
108533 |
01-Jan-2003 |
schweikh |
Correct typos, mostly s/ a / an / where appropriate. Some whitespace cleanup, especially in troff files.
|
108470 |
30-Dec-2002 |
schweikh |
Fix typos, mostly s/ an / a / where appropriate and a few s/an/and/ Add FreeBSD Id tag where missing.
|
108317 |
27-Dec-2002 |
schweikh |
english(4) police.
|
108106 |
19-Dec-2002 |
trhodes |
Fix some grammar nits. Mainly the use of `a' or `an' where the opposite is required.
PR: 33559 Submitted by: Marc Olzheim <marcolz@ilse.nl>
|
107781 |
12-Dec-2002 |
ru |
mdoc(7) police: markup overhaul.
Approved by: re
|
107744 |
11-Dec-2002 |
ru |
mdoc(7) police: Added the missing .Os call; it's not strictly necessary nowadays, but is documented as "required", and may become so again in the future.
Approved by: re
|
107691 |
09-Dec-2002 |
lioux |
Add finance, hungarian, multimedia [1] and portuguese collections
PR: 45835 [1] Submitted by: Morten Rodal <morten@rodal.no> [1] Approved by: re (murray) MFC after: 1 week
|
107323 |
27-Nov-2002 |
obrien |
As warned on freebsd-current@, remove the perl wrapper from /usr/src. The /usr/bin/perl wrapper isn't solving many of the problems it was imported to deal with. There are limitations to it that don't have a clear "fix".
Reviewed by: markm, kris Extorted approval from: re(jhb)
|
107318 |
27-Nov-2002 |
ru |
Removed the vestiges of modems(5).
Approved by: re
|
107241 |
25-Nov-2002 |
njl |
Add a DPADD section to fix 'make checkdpadd'
Submitted by: ru Approved by: re (previously)
|
107215 |
24-Nov-2002 |
njl |
Install new files from examples dir.
Approved by: re (previously)
|
107178 |
22-Nov-2002 |
njl |
New SCSI target emulator code
This code allows a user program to enable target mode on a SIM and then emulate any number of devices (disks, tape drives, etc.) All decisions about device behavior (UA, CA, inquiry response) are left to the usermode program and the kernel driver is merely a conduit for CCBs. This enables multiple concurrent target emulators, each using its own backing store and IO model.
Also included is a user program that emulates a disk (RBC) using a file as a backing store. This provides functionality similar to md(4) at the CAM layer.
Code has been tested on ahc(4) and should also work on isp(4) (and other SIMs that gain target mode support). It is a complete rewrite of /sys/cam/scsi_target* and /usr/share/examples/scsi_target.
Design, comments from: gibbs Supported by: Cryptography Research Approved by: re
|
106396 |
04-Nov-2002 |
alfred |
Backout "compatibility hack" for __sF.
Requested by: Steve Kargl <sgk@troutmask.apl.washington.edu> (submitter)
|
106352 |
02-Nov-2002 |
alfred |
Provide a hook to make __sF visible outside of libc for commercial apps if WANT_COMPAT4_STDIO is defined when compiling libc.
Submitted by: Steve Kargl <sgk@troutmask.apl.washington.edu>
|
105703 |
22-Oct-2002 |
phk |
Change to match NO_MAKEDEV* -> MAKEDEV*.
|
104288 |
01-Oct-2002 |
ru |
test -h is deprecated; use -L instead.
PR: bin/40846
|
104124 |
29-Sep-2002 |
jmallett |
Allow the shell preference for make(1) to be set in make.conf(5), and hopefully trick a few people into setting MAKE_SHELL to csh, although that can still rebuild itself to allow them to heal the wound in their foot.
|
103898 |
24-Sep-2002 |
ume |
Mention about how to build sendmail with SASLv2.
|
103048 |
07-Sep-2002 |
kris |
Add support for ev67 and ev45 CPUTYPEs (new in gcc3)
|
103046 |
07-Sep-2002 |
mux |
List the new athlon CPUs supported by the CPUTYPE make variable.
Submitted by: kris
|
101716 |
12-Aug-2002 |
hm |
add support properly displaying and logging incoming telephone numbers (MSNs) by looking at the "type of number" field and providing configurable hooks to correct the numbers accordingly. See keywords add-prefix, prefix-national and prefix-international in isdnd.rc(5). This feature was implemented by Christian Ullrich <chris@chrullrich.de>
|
101689 |
11-Aug-2002 |
hm |
add experimental support for Data over Voice (DoV) outgoing calls. based on patches received from Guy Ellis (guy@traverse.com.au), Chris Collins (xfire@xware.cx) and Phillip Musumeci (phillip@cs.jcu.edu.au).
|
101232 |
02-Aug-2002 |
ru |
TARGET_CPUTYPE should exist solely in Makefile.inc1, similar to TARGET_ARCH and TARGET. This is problematic when one has the = (unconditional) type of assigment for CPUTYPE in /etc/make.conf. (This would override what was set on the command line to "make buildworld".)
Add a (horrible) kludge to Makefile.inc1 to check the type of assignment for CPUTYPE (only for those who attempts to set it to a different value). Fix an example make.conf. Fix the kernel's build-tools target (aicasm only at the moment) to catch up with bsd.cpu.mk,v 1.15 (BOOTSTRAPPING replaced with NO_CPU_CFLAGS in Makefile.inc1's BMAKE).
Reviewed by: jhb
|
101215 |
02-Aug-2002 |
markm |
There is no more UUCP in the base system, so there is no need to prevent its building.
|
101214 |
02-Aug-2002 |
markm |
Modernise and tidy up.
|
101065 |
31-Jul-2002 |
ume |
include file of SASLv1 was changed to /usr/local/include/sasl1.
|
100977 |
30-Jul-2002 |
blackend |
Correct URLs to Handbook & FAQ's pages
MFC after: 1 week
|
100945 |
30-Jul-2002 |
blackend |
Correct links to Handbook's pages: http://www.freebsd.org/handbook/mirrors.html is not working anymore, http://www.freebsd.org/doc/handbook/mirrors.html is the new link
MFC after: 1 week
|
100872 |
29-Jul-2002 |
ru |
Drop support for COPY, -c has been the default mode of install(1) for a long time now.
Approved by: bde
|
100870 |
29-Jul-2002 |
ru |
Ignore -C, -p, and -S options of install(1) when used with the -d option. Warn about COPY being phased out. Restore the old method of always comparing before installing: INSTALL="install -C".
Requested by: bde
|
100859 |
29-Jul-2002 |
mjacob |
Fix Makefiles to actually work.
|
100346 |
19-Jul-2002 |
ru |
Don't install any old cruft present in the tree, including editor backups, .orig or .rej files, etc. Make transition from SHARED=symlinks to SHARED=copies and vice versa work.
Submitted by: des, ru
|
100320 |
18-Jul-2002 |
ru |
To force install(1) to always compare files before installing, one now needs to set COPY=-C as -C is no longer compatible with the -d option. It is also likely to be renamed to INSTALL_COPY soon. Update documentation to reflect this change.
PR: bin/40724
|
100313 |
18-Jul-2002 |
ru |
s/${INSTALL} -c/${INSTALL} ${COPY}/
|
99969 |
14-Jul-2002 |
charnier |
The .Nm utility
|
99771 |
11-Jul-2002 |
ru |
Update the SUBDIR hacks to work with the current bsd.subdir.mk.
|
99260 |
02-Jul-2002 |
johan |
's/rather then/rather than/'
PR: 38096 Submitted by: Chris Pepper <pepper@rockefeller.edu>
While I'm here correct some typos pointed out by ispell.
Approved by: sheldonh (mentor) MFC after: 1 week
|
98978 |
28-Jun-2002 |
maxim |
Include 'sshd' to the lists of forbidden users.
Reviewed by: cvs-committers
|
98462 |
20-Jun-2002 |
gshapiro |
Add a warning regarding the SENDMAIL_*_MC make.conf variable values. Using /etc/mail/sendmail.mc will create /etc/mail/sendmail.cf during a buildworld.
PR: misc/39397 MFC after: 3 days
|
98064 |
09-Jun-2002 |
dougb |
Per previous discussion, and with Mark's blessing, update the value of this knob to reflect (-)current reality.
|
97748 |
02-Jun-2002 |
schweikh |
Fix typo in the BSD copyright: s/withough/without/
Spotted and suggested by: des MFC after: 3 weeks
|
97387 |
28-May-2002 |
tjr |
Document the ENABLE_SUID_NEWGRP variable.
Requested by: mike PR: 36190
|
97200 |
24-May-2002 |
gshapiro |
Add a new make.conf knob, SENDMAIL_MAP_PERMS, which specifies the permissions to use for alias and map database files built by /etc/mail/Makefile. The default is 0640 to assist users in avoiding a file locking local denial of service.
MFC after: 1 day pending RE approval
|
96725 |
16-May-2002 |
markm |
Remove perl hooks.
Pointed out by: des
|
96436 |
12-May-2002 |
nectar |
Turn on the set-user-ID bit for k5su if ENABLE_SUID_K5SU is defined.
|
96398 |
11-May-2002 |
dd |
sysctl -w -> sysctl
|
96397 |
11-May-2002 |
dd |
sysctl -w -> sysctl
Approved by: ume
|
96225 |
08-May-2002 |
maxim |
Put 'ftp' back.
Requested by: bmah, jhb
|
96158 |
07-May-2002 |
maxim |
Sync with master.passwd.
PR: conf/37796 Submitted by: David Siebo"rger <drs@rucus.ru.ac.za> MFC after: 3 days
|
96151 |
07-May-2002 |
brian |
Add smmsp, mailnull and www
PR: 37796 Submitted by: drs@rucus.ru.ac.za MFC after: 1 week
Note, I don't usually look after pppd (just ppp), so I haven't removed the ftp and ingres users as I guess they're there for a reason....
|
95628 |
28-Apr-2002 |
gj |
Add the Dynalink IS64PPH+ as a supported card.
Reported by: znerd
|
95332 |
23-Apr-2002 |
obrien |
Back out the NO_RCMNDS knob. 1. The committer refused to respond to questions over the commit. 2. The servers rlogind, rshd, rexecd were not wrapped. 3. "rcmnds" as an abbreviation gets an order of magnitude less hits on Google than the much more well known "rcmds".
|
95258 |
22-Apr-2002 |
des |
Usage style sweep: spell "usage" with a small 'u'. Also change one case of blatant __progname abuse (several more remain) This commit does not touch anything in src/{contrib,crypto,gnu}/.
|
95107 |
20-Apr-2002 |
bp |
s/nwserv/nwfs/
Submitted by: Victor Sudakov <sudakov@sibptus.tomsk.ru> MFC after: 1 week
|
94676 |
14-Apr-2002 |
gshapiro |
Provide a new make.conf knob, SENDMAIL_SUBMIT_MC to allow users to pick the .mc file used for /etc/mail/submit.cf. By default, /etc/mail/freebsd.submit.mc is installed and used.
Requested by: fenner Submitted by: ume MFC after: 1 week
|
94477 |
12-Apr-2002 |
julian |
Change the script a bit to allow the creation of 'brouted' bridges. To do this you need to have each top-end connected as well. IP can be routed and other protocols get bridged.. Also useful when bridgeing two networks while merging them as machines will work with both old and new netmasks. (well mostly).
|
94297 |
09-Apr-2002 |
bmilekic |
Introduce NO_RCMNDS flag so as to not compile rsh, rlogin, and rcp on will, and document in share/examples/etc/make.conf
Submitted by: Aleksandar Simic <asimic@dsl.pipex.com> MFC after: 1 week
|
93629 |
02-Apr-2002 |
ru |
Style: don't override `beforeinstall', use FILES.
|
93449 |
30-Mar-2002 |
ume |
sendmail 8.12 doesn't require _FFR_UNSAFE_SASL anymore. This is standard feature.
Submitted by: ru
|
93446 |
30-Mar-2002 |
ume |
sendmail 8.12 claims against GroupReadableSASLFile.
Submitted by: mistral@imasy.or.jp
|
93227 |
26-Mar-2002 |
hm |
Update i4b documentation.
|
92940 |
22-Mar-2002 |
roam |
Install a sample /usr/share/examples/smbfs/dot.nsmbrc.
PR: 35649 Reported by: Johann Frisch <jerfa@yahoo.com> Reviewed by: bp Approved by: bp, silence on -doc MFC after: 1 week
|
92868 |
21-Mar-2002 |
ru |
Replaced hacks in sbin/Makefile,v 1.99 and usr.sbin/Makefile,v 1.217 with the NO_IPFILTER make.conf(5) knob.
(So that we can "make the-rest-of-the-world" again.)
|
92412 |
16-Mar-2002 |
markm |
Document NO_PERL.
|
92302 |
15-Mar-2002 |
luigi |
Add comments to ME README.BOOTP README.TEMPLATING mentioning that they contain stale information. Remove files referring to the old diskless setup to avoid confusion.
|
90803 |
17-Feb-2002 |
gshapiro |
Document new build knob, SENDMAIL_SET_USER_ID, which installs sendmail as a set-user-ID root binary instead of the new method (set-group-ID smmsp).
|
90522 |
11-Feb-2002 |
obrien |
Document NO_CXX and NO_GDB.
|
89936 |
29-Jan-2002 |
cjc |
Put a complete set of pppd(8) sample configuration files in /usr/share/examples/pppd.
Update pppd(8) documentation to reflect this, usr.sbin/pppd/pppd.8.
Remove the out-of-place pppd(8) configuration files in etc/ppp, ppp.shells.sample and ppp.deny.
Make the appropriate changes to the build process, etc/Makefile and etc/mtree/BSD.usr.mtree, so it all works.
The files from etc/ppp, ppp.shells.sample and ppp.deny, were moved with a repo copy. Note it in the logs with a forced commit to these two.
Submitted by: Maxim Konovalov <maxim@macomnet.ru> provided the new samples.
|
89211 |
10-Jan-2002 |
brian |
Add an example for testing scalability and concurrency
|
88461 |
24-Dec-2001 |
ru |
Document MODULES_OVERRIDE.
PR: docs/32560 Submitted by: Maxim Konovalov <maxim@macomnet.ru>
|
88410 |
22-Dec-2001 |
gj |
Update my email address, forgot to do this before.
MFC after: 4 weeks
|
88409 |
22-Dec-2001 |
gj |
Add the ifpi2 driver. Reminded by hm.
MFC after: 4 weeks
|
88408 |
22-Dec-2001 |
gj |
Add the AVM Fritz!Card PCI version 2 controller.
MFC after: 4 weeks
|
88078 |
17-Dec-2001 |
cjc |
Cleaning up some entries missed on the first sweep. Add a directory in /var/run to store ppp(8) command sockets.
PR: bin/29966 MFC after: 4
|
88060 |
17-Dec-2001 |
mwlucas |
Add Italian translations to the example for refusing docproj translations. This will once again allow docproj trackers to use the sample out-of-the-box to only download English.
Rapid MFC to avoid the coming freeze.
PR: 32329 Approved by: bmah MFC after: 1 day
|
88055 |
17-Dec-2001 |
ru |
FILES support for bsd.prog.mk. See bsd.README for details.
Stolen from: NetBSD
|
87878 |
14-Dec-2001 |
sheldonh |
Arrange for the smbfs examples to be installed.
We don't install dot.nsmbrc or smbfs.sh.sample, since we already install the former as /etc/nsmb.conf and the latter is unnecessary, since boot-time mounts can be arranged directly within /etc/fstab without fear of breaking the boot when the smbfs port (now unnecessary is removed).
The MFC reminder below is subject to <re@FreeBSD.org> approval priod to 4.5-RELEASE.
MFC after: 1 week
|
87636 |
11-Dec-2001 |
jhb |
- Add 'fwrite' and 'fseek' words for writing to and seeking on files. - Change the 'fopen' keyword to accept a mode parameter. Note that this will break existing 4th scripts that use fopen. Thus, the loader version has been bumped and loader.4th has been changed to check for a sufficient version on i386 and alpha. Be sure that you either do a full world build or install or full build and install of sys/boot after this since loader.old won't work with the new 4th files and vice versa.
PR: kern/32389 Submitted by: Jonathan Mini <mini@haikugeek.com> Sponsored by: ClickArray, Inc.
|
86327 |
13-Nov-2001 |
arr |
- Modify to make the generated device driver code work with current. - Use M_ZERO instead of another call to bzero().
Inspired by: misc/31905
|
86316 |
13-Nov-2001 |
arr |
Update the KLD examples so they will work with current.
Reviewed: jhb
|
85848 |
01-Nov-2001 |
cjc |
Add a directory in /var/run to store ppp(8) command sockets.
PR: bin/29966 Approved by: brian MFC after: 4
|
85400 |
24-Oct-2001 |
markm |
Back out my last commit. Ruslan (ru) has a better fix.
|
85381 |
23-Oct-2001 |
markm |
Make sure the copies: and symlinks: targets exist in the case of the empty ".for ..." loop.
|
85321 |
22-Oct-2001 |
jhay |
Back out my previous commit. It is not necessary anymore now that Ruslan fixed the ipfilter directory with a NOOBJ.
|
85310 |
22-Oct-2001 |
ru |
Clamp down with NOOBJ.
|
85307 |
22-Oct-2001 |
jhay |
Unbreak make world by adding .CURDIR here and there.
Submitted by: Harry Starr <starr3@gccs.com.au>
|
85281 |
21-Oct-2001 |
hm |
Thanks for postcards ...
|
85280 |
21-Oct-2001 |
hm |
upadate the release notes
|
85278 |
21-Oct-2001 |
hm |
Add a driver for the Compaq Microcom 610 ISDN (Compaq series PSB2222I) ISA PnP card.
Submitted by: Steve Looman Reviewed by: hm MFC after: 1 month
|
85214 |
20-Oct-2001 |
darrenr |
Add the ipfilter subdirectory
PR: 26763
|
85213 |
20-Oct-2001 |
darrenr |
Add the IPFilter how-to and other related documents to the base install so that users gets ipfilter examples without a source install.
PR: 26763 Submitted by: Cyrille Lefevre <clefevre@poboxes.com>
|
85103 |
18-Oct-2001 |
hm |
Add experimental support for sending keypad facility messages. MFC after: 2 months
|
84999 |
15-Oct-2001 |
brian |
Port 139 (NetBIOS session management) is a tcp socket, not udp.
PR: 31215 Submitted by: Stephane Marzloff <secrer@le-bar.org> MFC after: 1 week
|
84256 |
01-Oct-2001 |
kris |
Put back NOUUCP for now; cu and rmail are remaining pieces of the UUCP code which will stay for now.
|
84254 |
01-Oct-2001 |
kris |
Remove NOUUCP build option
|
84165 |
30-Sep-2001 |
sheldonh |
1) Fix change_rules.sh for the case where firewall_type provides the name of a file containing ipfw rules.
2) Replace the use of a predictable temporary filename with one generated by mktemp(1).
3) Only exit with a zero exit status if the rules were updated.
4) Use a pager to view the new rules, not an editor.
I was told by dcs that this script's original author is no longer interested in FreeBSD and would not wish to review this patch.
|
83731 |
20-Sep-2001 |
ru |
Add ports/french and ports/ukrainian to the list of foreign-language ports.
PR: docs/30687 Submitted by: Rob Simmons <rsimmons@mail.wlcg.com>
|
83706 |
20-Sep-2001 |
ru |
Correct comments to fit current realities of exporting crypto.
MFC after: 3 days
|
83609 |
18-Sep-2001 |
ru |
Style.
|
83608 |
18-Sep-2001 |
ru |
Style.
|
82604 |
30-Aug-2001 |
alex |
Move /etc/defaults/make.conf to /usr/share/examples/etc/make.conf as discussed on the arch@ mailinglist (after repo-copy).
sys.mk will .error if it finds /etc/defaults/make.conf but include it anyways (this is the same behaviour as with the make.conf.local removal).
/usr/share/examples/etc/make.conf has BDEFLAGS commented out now, since it's only an example file.
Adjust all textes that talk about make.conf or defaults/make.conf to match the new situation.
|
82520 |
29-Aug-2001 |
alex |
Document defaults/periodic.conf.
|
82519 |
29-Aug-2001 |
alex |
RIP all ports options, as discussed on arch@.
|
82120 |
22-Aug-2001 |
jim |
Add doc/sr and doc/sr_* to the sample refuse file.
PR: 29935 Submitted by: Rob Simmons <rsimmons@mail.wlcg.com>
|
81749 |
16-Aug-2001 |
obrien |
Add the `WANT_FORCE_OPTIMIZATION_DOWNGRADE' knob. If set to an integer value, it forces GCC to not optimize above this level. For intance, GCC made with "WANT_FORCE_OPTIMIZATION_DOWNGRADE=1" is a good setting for the Alpha platform when building ports.
|
81586 |
13-Aug-2001 |
ru |
Removed duplicate VCS ID tags, as per style(9).
|
81557 |
12-Aug-2001 |
markm |
Remove the WANT_INSECURE_OPIE option - it is now a default. This is not nearly as ominous as it sounds, and it allows OPIE to be used over SSH and on xterms.
Requested by: ache Discussed on: -security
|
81554 |
12-Aug-2001 |
knu |
Chagne MASTER_SITE_FREEBSD to MASTER_SITE_FREEBSD_ORG, because MASTER_SITE_FREEBSD is already used in bsd.port.mk for some different purpose.
|
81553 |
12-Aug-2001 |
knu |
Fix MASTER_SITE_RUBY. The listed master site is obsolete.
|
81552 |
12-Aug-2001 |
knu |
Add MASTER_SITE_FREEBSD.
|
81277 |
08-Aug-2001 |
ru |
mdoc(7) police: markup nits.
|
81262 |
07-Aug-2001 |
phk |
Improve the example FreeBSD/Beastie poster a bit: Move Kirks copyright up above the bottom banner. Use the right font in the bottom banner. Move the bottom banner up so inkjet printers can print it.
|
81194 |
06-Aug-2001 |
nik |
Note that the doc collection is not branched.
|
80807 |
01-Aug-2001 |
obrien |
It appears we really shouldn't be following this example man page -- one should not use a `%' in examples.
I don't know if this is the consensus of doc@, or just a unilateral decision of committer that corrected my following of this example. Maybe a docs person could review these files and see if they still show current guidelines.
|
80642 |
30-Jul-2001 |
ache |
Since we remove skey...
|
80452 |
27-Jul-2001 |
peter |
Take -Wconversion out of BDECFLAGS. It is not particularly useful for us anyway because it doesn't work right on the x86 and alpha. On K&R code, small ints would be promoted to int. ANSI-C doesn't require this and the small ints can be passed taking 8 or 16 bits of stack space. However, the x86 abi that we use *does* promote to 32 bit, and the alpha ABI passes them in 64 bit registers so we dont have that aspect of the problem here. Losing float precision by having it cast down to int because the funtion prototype specifies int is the least of our problems. -Wmissing-prototypes helps here anyway.
|
80282 |
24-Jul-2001 |
brian |
Remove redundant mtu/mru/speed settings
MFC after: 6 days
|
80175 |
23-Jul-2001 |
gshapiro |
New make knob, SENDMAIL_M4_FLAGS, modifies the flags passed to m4 when building a .cf file from a .mc file.
Include -D_FFR_TLS_O_T to enable tls policy control since the sendmail binary build enables that FFR as well.
PR: conf/28361 MFC after: 1 week
|
80083 |
21-Jul-2001 |
hm |
Add a patch from the isdn mailinglist, Juha writes:
ppp in 4.x apparently does a close(2) after opening the tun device; i4brunppp starts up with only file descriptors 0 and 1 open (to the rbch device) -> tun gets opened as 2 -> tun gets closed -> later use results in EBADF. A quick fix to i4brunppp.c makes the thing work (I know, this is ugly, but I needed it up quick...):
Submitted by: Juha-Matti Liukkonen <jml@cubical.fi>
|
80082 |
21-Jul-2001 |
hm |
Add the i4brunppp utility to the example section. This utility is one way of taking incoming calls with i4b in conjunction with userland ppp(8).
|
80080 |
21-Jul-2001 |
hm |
update ReleaseNotes for isdnd keyword maxconnecttime
|
79857 |
18-Jul-2001 |
ru |
Removed the comment that required all FreeBSD manpages to have the $FreeBSD$ keyword, as this is now enforced by the CVSROOT/commit_prep.pl script.
Fold multi-word macro arguments into a single argument by putting the surrounding double quotes - this speeds up the -mdoc processing drastically (of course if used systematically).
Use the new features of -mdoc: exact -width specifiers, .In macro as an ``.Fd #include'' replacement.
|
79852 |
18-Jul-2001 |
sheldonh |
Remove an example of bad sentence breaking style.
|
79757 |
15-Jul-2001 |
dd |
Remove whitespace at EOL.
|
79548 |
10-Jul-2001 |
markm |
Provide a hint for the OPIE 'insecure' mode.
|
79452 |
09-Jul-2001 |
brian |
Fix the type of the NULL arg to execl()
Idea from: Theo de Raadt <deraadt@openbsd.org>
|
79366 |
06-Jul-2001 |
ru |
mdoc(7) police: sort SEE ALSO xrefs (sort -b -f +2 -3 +1 -2).
|
79086 |
02-Jul-2001 |
brian |
Fix some typos.
Submitted by: Jimmy Olgeni <olgeni@uli.it> MFC after: 1 week
|
79035 |
30-Jun-2001 |
dd |
Correct a brain-o in the stats output.
PR: 24839 Submitted by: AMAKAWA Shuhei <amakawa@sf.t.u-tokyo.ac.jp>
|
78862 |
27-Jun-2001 |
gshapiro |
Typo fix (modifes -> modifies)
|
78408 |
18-Jun-2001 |
ru |
Make this really work.
|
78265 |
15-Jun-2001 |
nik |
Include a mention of WRKDIRPREFIX, useful when mounting /usr/ports readonly from another host.
|
78064 |
11-Jun-2001 |
ume |
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge.
TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT.
Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
|
78038 |
11-Jun-2001 |
ache |
ISO_ -> ISO in comment
|
78035 |
11-Jun-2001 |
ache |
ISO_ -> ISO in DOC_LANG
|
78012 |
10-Jun-2001 |
ume |
Implement EDNS0 support, as EDNS0 support will be made mandatory for IPv6 transport-ready resolvers/DNS servers. Need careful configuration when enable it. (default config is not affected). See manpage for details.
XXX visible symbol __res_opt() is added, however, it is not supposed to be called from outside, libc minor is not bumped.
Obtained from: KAME/NetBSD
|
77829 |
06-Jun-2001 |
dcs |
Use ${EDITOR} as claimed.
Source rc.conf and use ${firewall_script} instead of rc.firewall.
Textwidth formatting of comments and text.
PR: Submitted by: Maxim <maxim@news1.macomnet.ru>
(sorry if I got name/email/committer status wrong :)
|
77815 |
06-Jun-2001 |
dcs |
Introduce an example script of safe changing of ipfw(8) rules.
I'm sure this can be much improved, but this works fairly well.
PR: 27887 Submitted by: Alexandre Peixoto <alexandref@tcoip.com.br> MFC after: 1 week
|
77630 |
02-Jun-2001 |
hm |
added Sergio de Souza Prallon (prallon@tmp.com.br), the author of the itjc hardware driver.
|
77629 |
02-Jun-2001 |
hm |
update the isdn4bsd general documentation
|
77628 |
02-Jun-2001 |
hm |
bring the roadmap to isdn4bsd up to date.
|
77627 |
02-Jun-2001 |
hm |
update the postcard list
|
77520 |
31-May-2001 |
markm |
PERL_THREADED is too experimental at this stage. Remove.
|
77264 |
27-May-2001 |
hm |
Add an example of a kernel configuration file fragment for ISDN.
|
77262 |
27-May-2001 |
sheldonh |
The PERL_THREADED knob is causing too many people too many problems. Add a dire warning about the experimental nature of threaded Perl.
|
77177 |
25-May-2001 |
hm |
Add the contributed directory from the i4b tarball and the files from it which would be nice to have. Move isdnd_acct and isdnctl to the contrib directory where they belong to.
|
77175 |
25-May-2001 |
hm |
Submitted by: phk Add the V.21 modem emulator code written by phk from the old i4b tarball.
|
77173 |
25-May-2001 |
alex |
This script can control the state of your ISDN line. It counts how many scripts/users currently use the ISDN line and uses "ifconfig down" if noone uses it any more.
Not objected by: hm
|
77172 |
25-May-2001 |
hm |
update isdn4bsd related information.
|
77171 |
25-May-2001 |
brian |
Mention that ppp.conf.isdn isn't appropriate for external TAs Add a section to ppp.conf.sample that is.
MFC after: 3 weeks
|
77129 |
24-May-2001 |
ru |
mount_portal -> mount_portalfs.
|
77041 |
23-May-2001 |
ru |
Add NO_I4B to avoid building/installing isdn4bsd package.
Prompted by: Alexandr Listopad <laa@laa.zp.ua> MFC after: 3 days
|
76815 |
18-May-2001 |
ru |
Grab headers from /usr/include.
|
76814 |
18-May-2001 |
ru |
Removed unneeded stuff.
|
76518 |
12-May-2001 |
assar |
clarify comment about MAKE_KERBEROS5. noticed by Peter Pentchev <roam@orbitel.bg>
|
76363 |
08-May-2001 |
brian |
Be a little clearer all characters after a # are ignored unless the # is escaped or quoted. Add an example of # characters as part of a phone number.
PR: 26605
|
76175 |
01-May-2001 |
schweikh |
pseudo-device -> device in kernel config lines. Removed whitespace at EOL. Reviewed by: joerg, dd
|
76157 |
30-Apr-2001 |
dillon |
Remove a real FQDN host reference from the example
Add $FreeBSD tag
|
76122 |
29-Apr-2001 |
dd |
Clarify a little: the mandatory argument is an event number.
PR: 26905 Submitted by: AMAKAWA Shuhei <sa264@cam.ac.uk>
|
76073 |
27-Apr-2001 |
ru |
Removed reference to withdrawn secure-supfile.
|
76072 |
27-Apr-2001 |
ru |
stable-supfile now covers 4.x-stable.
|
76071 |
27-Apr-2001 |
ru |
MFS: revision 1.19.2.4 Correct comments to fit current realities of exporting crypto.
|
75982 |
25-Apr-2001 |
jim |
Document XFREE86_VERSION.
|
75869 |
23-Apr-2001 |
ru |
The semantics of the .Os call has been changed. For CURRENT, this currently implies the default argument of "FreeBSD 5.0".
|
75839 |
22-Apr-2001 |
sobomax |
Add missed and update existing MASTER_SITE_*.
|
75825 |
22-Apr-2001 |
asami |
Add ports-picobsd.
|
75595 |
17-Apr-2001 |
ru |
mdoc.samples(7) is superseded by mdoc(7).
|
75537 |
16-Apr-2001 |
luigi |
New script to help creation of shared readonly diskless partition. It also has some instructions on how to setup the client and the server. I have been using this code for over 2 years on RELENG_3 and later RELENG_4. Have not tried on CURRENT, but in case there are any issues these are in /etc/rc and /etc/rc.diskless{12}
|
75517 |
14-Apr-2001 |
brian |
Suggest that kernels are built with ``cd /usr/src; make buildkernel'' Add a comment saying that our softc is automatically allocated by the parent bus. Fix lots of spellings
|
75228 |
05-Apr-2001 |
mpp |
We don't use the "pseudo-device" configuration option any longer, so update the example to use the correct definition.
Add an example for documenting kernel compile options, along with a small example of how to reference them in the main text of the man page (I.e. the .Dv macro).
Inspired-by: a brief exchange I saw in in the commit messages mail
|
75207 |
05-Apr-2001 |
dd |
Make it clear that commands within labels must be indented to be recognized.
PR: 26293 Reviewed by: brian
|
75044 |
31-Mar-2001 |
obrien |
Use -r rather than -R to get "reasonable permissions and ownership".
|
74990 |
29-Mar-2001 |
asmodai |
Change NO_MAKEDEV to a finer granularity method: NO_MAKEDEV_INSTALL and NO_MAKEDEV_RUN. The former implying the latter. The names imply what they do. The last commit by DES based on a PR defeated the original idea behind NO_MAKEDEV, which was not to run MAKEDEV, but to do the installation of MAKEDEV. This should satisfy both parties on the MAKEDEV challenge.
|
74756 |
24-Mar-2001 |
asami |
Add new categories science and ukrainian.
|
74247 |
14-Mar-2001 |
murray |
Add a commented out entry for compat4x
PR: 25196 Submitted by: Chris Knight <chris@aims.com.au>
|
74146 |
12-Mar-2001 |
kris |
Use CPUTYPE to add appropriate compiler flags to COPTFLAGS for kernel builds. This may be disabled using the NO_CPU_COPTFLAGS variable.
Reviewed by: arch
|
74061 |
10-Mar-2001 |
billf |
fix spelling errors, clarify comment, add $FreeBSD$
|
74055 |
10-Mar-2001 |
gshapiro |
Use the correct path to the SASL .h files as installed by the SASL port.
MFC candidate.
Submitted by: jeh
|
73836 |
06-Mar-2001 |
gshapiro |
Use a different example to avoid confusion
|
73779 |
05-Mar-2001 |
assar |
remove warning of experimental nature of heimdal. it's now the same version as the one in ports (and the latest at that), except that not all programs that are in the port get built
|
73489 |
04-Mar-2001 |
phk |
Give the shoe-laces a distinct color so they don't disappear on b/w daemons.
|
73401 |
04-Mar-2001 |
kris |
Correct the comment above MAKE_IDEA to be less confusing now that we only have one patented algorithm in make.conf.
|
73388 |
03-Mar-2001 |
mjacob |
include paths.h for _PATH_DEV
|
73145 |
27-Feb-2001 |
kris |
Add definitions and support for the AMD k6-2, Pentium MMX (i586/MMX), and Pentium II, III and IV processors (p2, p3, p4), as well as 'mmx' and '3dnow' MACHINE_CPU tags as appropriate. In the near future this will be used to control various ports which have MMX/3dNow optimizations, instead of the ad-hoc methods currently used.
Reviewed by: peter
|
73141 |
27-Feb-2001 |
asmodai |
Short lived fame for -Wundef.
Second thoughts by: bde
|
73136 |
27-Feb-2001 |
asmodai |
Add -Wundef to BDECFLAGS:
Warn if an undefined identifier is evaluated in an `#if' directive.
Not objected to by: bde
|
73088 |
26-Feb-2001 |
ru |
.St -ansiC -> .St -isoC
|
73043 |
25-Feb-2001 |
kris |
Update the list of OpenSSL manpages (now contains many more describing libssl, for example), and hide it behind a make.conf option, WANT_OPENSSL_MANPAGES, instead of having it commented out. We still can't install these by default because of clobbering of a number of system manpages with the same name, but they're there for people who want them.
|
72971 |
24-Feb-2001 |
tanimura |
I thought it was a new CPU :)
s/i585/i586/
|
72918 |
22-Feb-2001 |
gshapiro |
Need one additional make.conf knob, SENDMAIL_ADDITIONAL_MC to satisfy bug report. It allows building multiple .cf files at build time.
PR: bin/19897
|
72916 |
22-Feb-2001 |
gshapiro |
Add a note indicating that SENDMAIL_MC should include the path. This is necessary if you expect to be able to use this setting in both /etc/mail and etc/sendmail.
|
72878 |
22-Feb-2001 |
kris |
Overhaul the MACHINE_CPU behaviour:
* Rip out MACHINE_CPU stuff from sys.mk and include a new <bsd.cpu.mk> after we pull in /etc/make.conf. We need to do it afterwards so we can react to the user setting of the:
* CPUTYPE variable, which contains the CPU type which the user wants to optimize for. For example, if you want your binaries to only run on an i686-class machine (or higher), set this to i686. If you want to support running binaries on a variety of CPU generations, set this to the lowest common denominator. Supported values are listed in make.conf.
* bsd.cpu.mk does the expansion of CPUTYPE into MACHINE_CPU using the (hopefully) correct unordered list of CPU types which should be used on that CPU. For example, an AMD k6 CPU wants any of the following: k6 k5 i586 i486 i386 This is still an unordered list so the client makefile logic is simple - client makefiles need to test for the various elements of the set in decreasing order of priority using ${MACHINE_CPU:M<foo>}, as before. The various MACHINE_CPU lists are believed to be correct, but should be checked.
* If NO_CPU_CFLAGS is not defined, add relevant gcc compiler optimization settings by default (e.g. -karch=k6 for CPUTYPE=k6, etc). Release builders and developers of third-party software need to make sure not to enable CPU-specific optimization when generating code intended to be portable. We probably need to move to an /etc/world.conf to allow the optimization stuff to be applied separately to world/kernel and external compilations, but it's not any worse a problem than it was before.
* Add coverage for the ia64/itanium MACHINE_ARCH/CPUTYPE.
* Add CPUTYPE support for all of the CPU types supported by FreeBSD and gcc (only i386, alpha and ia64 first, since those are the minimally-working ports. Other architecture porters, please feel free to add the relevant gunk for your platform).
Reviewed by: jhb, obrien
|
72846 |
22-Feb-2001 |
gshapiro |
Add a new make knob, SENDMAIL_MC, which is meant to replace SENDMAIL_CF as users should be configuring via m4 now. If set, use m4 to create the .cf file. Also, if either SENDMAIL_MC or SENDMAIL_CF is set, 'make install' or 'make distribution' in src/etc/sendmail/ will install the appropriate .cf as /etc/mail/sendmail.cf. This fixes some mergemaster problems.
PR: conf/13016
|
72679 |
19-Feb-2001 |
kris |
Introduce support for using OpenSSL ASM optimizations. This is done through the use of a new build directive, MACHINE_CPU, which contains a list of the CPU generations/features for which optimizations are desired. This feature will be extended to cover the ports tree in the future.
Currently OpenSSL provides optimizations for i386, i586 and i686-class CPUs. Currently it has not been tested on an i386 or i486.
Teach make(1) to provide sensible defaults for MACHINE_CPU if it is not defined (namely, the lowest common denominator CPU we support for each architecture). Currently this is i386 for the i386 architecture and ev4 for the alpha. sys.mk also sets the variable as a last resort for consistency with MACHINE_ARCH and bootstrapping from very old versions of make.
Benchmarks show a significant speed increase even in the i386 case, with additional improvements for i586 and i686 systems. For maximum performance define MACHINE_CPU=i686 i586 i386 in /etc/make.conf.
Based on a patch submitted by: Mike Silbersack <silby@silby.com> Reviewed by: current
|
72575 |
17-Feb-2001 |
phk |
Add some FreeBSD logo material to the tree:
"FreeBSD.pfa" - the (postscript) font used to write "FreeBSD". "beastie.fig" - a 4.3 BSD style Daemon in vector graphic. "beastie.eps" - same converted to encapsulated postscript. "poster.sh" - an example how to use this stuff. "README" - the full story.
|
72336 |
10-Feb-2001 |
abial |
Unbreak by syncing with changes in <sys/sysctl.h> macros.
|
71895 |
01-Feb-2001 |
ru |
mdoc(7) police: split punctuation characters + misc fixes.
|
70165 |
18-Dec-2000 |
imp |
o Add cardbus support (use pci attachment for now) <bde> o Add comments in some places to clarify some points. o Don't typedef sc_p. This isn't usually done in the drivers and may cause problems in teh future if C goes the C++ route of requiring one and only one definition for each and every type. Instead use the current convetion of expanding struct ${1}_softc * inline needed. o change some comments to be more style(9)-like. o Define and use DEV2SOFTC to encapsulate storing/getting softc from a dev_t. This also takes care of the missing cast from the examples. o Define and use DEVICE2SOFTC, similar to DEV2SOFTC for getting the softc from a device_t. </bde>
We still should have this generate foo_{isa,pci,pccard,cardbus,eisa}.c and foovar.h from templates of some sort, but I was too lazy to do that in this commit. I did document it in the comments, however.
Note: bde-like corrections made with the help of my my portable plastic bde icon. Results with the real bde may vary with use.
|
70015 |
14-Dec-2000 |
ru |
mdoc(7) police: removed history info from the .Os FreeBSD call.
|
69820 |
10-Dec-2000 |
des |
Add a reference to the fetch(3) man page.
|
69793 |
09-Dec-2000 |
obrien |
Add `_PATH_DEVZERO'. Use _PATH_* where where possible.
|
69470 |
01-Dec-2000 |
brian |
Add more comments, fix a typo, mention how to do PPPoUDP using encryption to create a VPN.
|
69425 |
30-Nov-2000 |
brian |
Get rid of that damned ``i4b-L4-i4b_l4_setup_timeout: 975625189: ERROR: idletime[900]+earlyhup[5] > unitlength[60]!'' message.
|
69419 |
30-Nov-2000 |
brian |
Add some comments and $FreeBSD$
|
69417 |
30-Nov-2000 |
brian |
Update some misleading comments, empty ``set logout'', and add a comment describing how to take advantage of telcos that give free phone calls at certain times.
|
69380 |
30-Nov-2000 |
gshapiro |
Add commentary about shared SASL files versus sendmail compilation.
Submitted by: Scot W. Hetzel <hetzels@westbend.net>
|
69063 |
22-Nov-2000 |
obrien |
Remove "NODESCRYPTLINKS" it has been superseeded by "passwd_format" in /etc/login.conf.
|
69052 |
22-Nov-2000 |
ru |
mdoc(7) police: Er macro usage cleanup.
|
69040 |
22-Nov-2000 |
ben |
Add a note asking committers to update make.conf.5 when they update this.
|
68960 |
20-Nov-2000 |
ru |
mdoc(7) police: use the new features of the Nm macro.
|
68917 |
19-Nov-2000 |
dougb |
Standardize spelling of "optimization" in comments
PR: conf/22622 Submitted by: knu
|
68748 |
15-Nov-2000 |
julian |
Slight cleanups after comments from John Hay (Thanks!) Also add more comments.
|
68705 |
14-Nov-2000 |
green |
Disable /usr/bin/ssh being setuid root by default. Let the variable ENABLE_SUID_SSH being defined reenable it for those that want it.
This follows discussion favoring the change from September. It is not usually necessary to be setuid root, possibly less safe, and less convenient (cannot use $HOSTALIASES, for example).
Submitted by: jedgar
|
68630 |
12-Nov-2000 |
julian |
Share one devclass between ISA and PCI sections This will ensure unit numbers will co-ordinate between them
|
68606 |
11-Nov-2000 |
julian |
Add basic PCI capability Not sure how unit numbers are carried across between PCI and ISA though.. maybe there should be only one devclass between the two?
|
68559 |
10-Nov-2000 |
ru |
Fixed typo in description of ENABLE_SUIDPERL.
|
68533 |
09-Nov-2000 |
julian |
Add more sample code having read the daemnnews article (August 2000)
|
68506 |
08-Nov-2000 |
julian |
Having figured out a bit more of the new-bus puzzle I have added support for finding non-PNP devices to this sample loadable ISA driver. PCI support will come later.
If someone with a clue about newbus were to look it over it would be really cool.
|
68481 |
08-Nov-2000 |
jkh |
Add commented-out entries for FTP_PROXY and HTTP_PROXY so those behind firewalls have examples to work from.
Requested by: chein
|
68310 |
04-Nov-2000 |
ps |
MF4: Add LOADER_TFTP_SUPPORT make.conf flag.
|
68263 |
02-Nov-2000 |
obrien |
State that using optimization level above -O for kernel builds isn't smart.
|
68173 |
01-Nov-2000 |
hm |
Ooops, forgot to add the originator for the last FAQ entry
|
68172 |
01-Nov-2000 |
hm |
Add entry to the FAQ
|
68164 |
01-Nov-2000 |
rse |
Don't use the old URL to the GNU ftp location any more: ftp://prep.ai.mit.edu/pub/gnu/ -> ftp://ftp.gnu.org/gnu/
|
67657 |
26-Oct-2000 |
julian |
Add copyright to skeleton.
|
67653 |
26-Oct-2000 |
julian |
some more cleanups still need to handle non-PNP devices properly.
|
67568 |
25-Oct-2000 |
julian |
Slowly add more functionality as I learn more about newbus etc.
|
67505 |
24-Oct-2000 |
julian |
First effort at bringing these up-to-date. This creates a skeleton ISA device driver. I don't pretend that it's fully correct or even opitimal but it at least creates (and compiles) a 'clean' ISA driver.
Hopefully PCI/PCCARD/etc. support will be added when I understand it. Unlike the old version this just creates a module. The old one tried to create a new kernel with the driver to be tested.
|
67491 |
24-Oct-2000 |
knu |
Add MASTER_SITE_MOZILLA and MASTER_SITE_XEMACS.
|
67431 |
22-Oct-2000 |
knu |
It is bsd.sites.mk one should look for a full list of default sites, not bsd.port.mk anymore.
Add MASTER_SITE_XFREE, MASTER_SITE_RINGSERVER, MASTER_SITE_TCLTK and MASTER_SITE_RUBY.
Document and add MASTER_SORT_REGEX.
|
66932 |
10-Oct-2000 |
hm |
update i4b version to 0.96.00
|
66917 |
10-Oct-2000 |
obrien |
Removed the FreeBSD ID I was forced to add in rev 1.9.
|
66885 |
09-Oct-2000 |
hm |
update to i4b version 0.95.04 This commit adds the ReleaseNotes file which contains a list of major i4b changes happened since the last version comitted to FreeBSD (0.90.01).
|
66834 |
08-Oct-2000 |
phk |
Initiate deorbit burn sequence for <machine/console.h>.
Replace all in-tree uses with necessary subset of <sys/{fb,kb,cons}io.h>. This is also the appropriate fix for exo-tree sources.
Put warnings in <machine/console.h> to discourage use. November 15th 2000 the warnings will be converted to errors. January 15th 2001 the <machine/console.h> files will be removed.
|
66828 |
08-Oct-2000 |
obrien |
Use <space> not <tab> before VCS ID.
|
66549 |
02-Oct-2000 |
sobomax |
Fix cdev kld example after it has been broken for year or so. Also extend list of supported operations by example read() and write() operations.
Inspired by: http://www.daemonnews.org/200010/blueprints.html PR: 16173 Submitted by: sobomax
|
66512 |
01-Oct-2000 |
archie |
Script showing how to setup Ethernet bridging using ng_bridge(4).
|
66257 |
22-Sep-2000 |
asmodai |
This is a very obsolete example file for wormcontrol, which is no longer present in the tree.
PR: 21005 Submitted by: Michael Harnois <mdharnois@home.com>
|
66213 |
22-Sep-2000 |
asami |
Add ports-french.
|
65970 |
17-Sep-2000 |
gshapiro |
Give users a way to alter the sendmail (and related utilities) build environment so they can enable functionality such as SASL, LDAP, Hesiod.
|
65957 |
16-Sep-2000 |
ache |
Comment out MTREE_FOLLOWS_SYMLINKS by default, since it picked before mtree is builded (on the clean machine without /etc/make.conf)
Submitted by: imp
|
65884 |
15-Sep-2000 |
ache |
Add/use MTREE_FOLLOWS_SYMLINKS make.conf option This is part of whole subsystem fixing
Reviewed by: imp
|
65653 |
10-Sep-2000 |
kris |
Nuke RSAREF support from orbit.
It's the only way to be sure.
|
65551 |
06-Sep-2000 |
kris |
``Anyone is now free to rub two primes together for their own gratification'' -- Unknown
Now that the RSA algorithm is released into the public domain, build librsaintl by default unless NO_RSAINTL is set in make.conf.
The native OpenSSL implementation of RSA is much faster, doesn't have an artificial keysize limitation, has 30% fewer calories and tastes great!
|
65532 |
06-Sep-2000 |
nectar |
Add nsswitch support. By creating an /etc/nsswitch.conf file, you can configure FreeBSD so that various databases such as passwd and group can be looked up using flat files, NIS, or Hesiod.
= Hesiod has been added to libc (see hesiod(3)).
= A library routine for parsing nsswitch.conf and invoking callback functions as specified has been added to libc (see nsdispatch(3)).
= The following C library functions have been modified to use nsdispatch: . getgrent, getgrnam, getgrgid . getpwent, getpwnam, getpwuid . getusershell . getaddrinfo . gethostbyname, gethostbyname2, gethostbyaddr . getnetbyname, getnetbyaddr . getipnodebyname, getipnodebyaddr, getnodebyname, getnodebyaddr
= host.conf has been removed from src/etc. rc.network has been modified to warn that host.conf is no longer used at boot time. In addition, if there is a host.conf but no nsswitch.conf, the latter is created at boot time from the former.
Obtained from: NetBSD
|
65480 |
05-Sep-2000 |
dcs |
Good thing about these examples is that no one uses them, so they can stay broken for months without anyone noticing.
The boot-conf command was changed as to reproduce the behavior of builtin loader words precisely. As a result, it now always need an argument, possibly 0 indicating that no other arguments are being passed. This broke in a non-deterministic way (ie, it could go on working as if everything was fine).
|
65381 |
02-Sep-2000 |
obrien |
Move `NOPROFILE' and `NOPERL' to be with the reset of their "NO" brethren.
|
65380 |
02-Sep-2000 |
obrien |
Move the kernel's "cflags" to be next to the world ones.
|
64803 |
18-Aug-2000 |
brian |
Add a PPP_NOSUID hook
|
64783 |
17-Aug-2000 |
brian |
Use an MRU of 1504 with 1500 byte MRRUs
|
64782 |
17-Aug-2000 |
brian |
Make this file look prettier Bump the MRU by 4 bytes to make room for the MP header Down the autoload threshold to a practical value Don't specify the ISDN bandwidth as 65536 (ahem!) Don't specifiy a carrier period (the default of 6 seconds is fine)
|
64679 |
15-Aug-2000 |
brian |
Make the pppoe-in config entry a bit more useful (and verbose)
|
64606 |
13-Aug-2000 |
joe |
MFS4: The stable branch is now RELENG_4 not RELENG_3. Alex changed this in RELENG_4, but not in HEAD.
|
64605 |
13-Aug-2000 |
joe |
Define SUPHOST. If this is set a '-h ${SUPHOST}' is added to the SUPFLAGS when a 'make update' is run. This means that the supfile doesn't need to be edited because the -h will override the CHANGE_THIS.FreeBSD.org host.
|
64576 |
13-Aug-2000 |
imp |
Change BUILD_SUIDPERL to ENABLE_SUIDPERL, with changed note as to what it does.
|
64515 |
10-Aug-2000 |
imp |
Change NOSUIDPERL to BUILD_SUIDPERL. One must now explicitly enable building suidperl.
|
64285 |
05-Aug-2000 |
ben |
Mention the non-English docs as well as ports.
|
64258 |
04-Aug-2000 |
jim |
Explain that in order to track -STABLE, you should leave the src-all collection uncommented.
PR: 20398 Submitted by: Jeff Blaine <jeffblaine@mediaone.net> Reviewed by: jhb
|
64253 |
04-Aug-2000 |
jdp |
Remove everything resembling a comment from "refuse" and put the explanations into a new file "refuse.README". Some users are simply copying these files and expecting them to work -- without even reading them. I don't want to spend any more time closing bogus PRs from that.
Also correct an error or two in the patterns.
|
64039 |
31-Jul-2000 |
ache |
Add #ports/hebrew
|
64036 |
31-Jul-2000 |
asami |
Add ports-hebrew.
|
63375 |
18-Jul-2000 |
mjacob |
Don't get stuck in a loop calling exit from an atexit routine. Clean up cam_fill_ctio usage to passed atio flags. Clear periph_priv area of new ctio so if the kernel is dumb enough to look at them (this is a SECURITY hole) the panic will be obvious instead of subtle.
|
63290 |
17-Jul-2000 |
mjacob |
Clean up after oneself on exit.
|
63277 |
16-Jul-2000 |
ben |
Clarify that CVSup doesn't understand comments in refuse files.
PR: 19949 Submitted by: Jun Ushida <ushida@msa.biglobe.ne.jp>
|
63212 |
15-Jul-2000 |
abial |
These patches implement dynamic sysctls. It's possible now to add and remove sysctl oids at will during runtime - they don't rely on linker sets. Also, the node oids can be referenced by more than one kernel user, which means that it's possible to create partially overlapping trees.
Add sysctl contexts to help programmers manage multiple dynamic oids in convenient way.
Please see the manpages for detailed discussion, and example module for typical use.
This work is based on ideas and code snippets coming from many people, among them: Arun Sharma, Jonathan Lemon, Doug Rabson, Brian Feldman, Kelly Yancey, Poul-Henning Kamp and others. I'd like to specially thank Brian Feldman for detailed review and style fixes.
PR: kern/16928 Reviewed by: dfr, green, phk
|
63186 |
14-Jul-2000 |
mjacob |
Whoops- more changes in last checkin than TARGIODEBUG- some additional TARGIOCCLEAREXCEPTION ioctls added as needed.
Obtained from: gibbs@freebsd.org
|
63185 |
14-Jul-2000 |
mjacob |
Make use of the new TARGIODEBUG ioctl (i.e., add an option for it's use).
|
63123 |
14-Jul-2000 |
peter |
Be consistant about WITH_ vs MAKE_ flags. We have a precedent of using MAKE_foo for things like MAKE_KERBEROS etc. Use that. I managed to confuse myself last time and made make.conf different to the code. ;-(
Reported by: Jun Kuriyama <kuriyama@FreeBSD.org>
|
62851 |
09-Jul-2000 |
markm |
The World Order has changed. We no longer need separate "secure" collections for crypto code; these are merged into cvs-all and src-all. OKed by: jdp
|
62680 |
06-Jul-2000 |
brian |
Add various system usernames (even though I try to avoid pppd!!!)
PR: 19717 Submitted by: Tony Finch <dot@dotat.at>
|
62482 |
03-Jul-2000 |
peter |
Delete the RSAREF=YES example from make.conf - it is not used at all. Add knobs for the optional crypto parts with some notes.
|
62247 |
29-Jun-2000 |
peter |
Include the src-crypto-rsa collection by default for internat users.
|
62246 |
29-Jun-2000 |
peter |
List src-secure-rsa and clarify that cvs-crypto does not have it.
|
62136 |
26-Jun-2000 |
obrien |
Add BDECFLAGS so people can use them easily in /etc/make.conf.
|
61744 |
17-Jun-2000 |
obrien |
If "MODULES_WITH_WORLD" is defined, sys/modules will be built with the world as was our old way, rather than when building a kernel.
Some people do not like the new way, and the release building still assumes modules are built with the world.
|
61139 |
31-May-2000 |
hoek |
Add a NO_LPR option. Useful for people who want to use LPRng.
PR: bin/18787 (David Gilbert <dgilbert@velocet.ca>)
|
61097 |
30-May-2000 |
brian |
Mention that some PPPoE servers cache MAC addresses
|
60930 |
25-May-2000 |
dirk |
Remove -a from mkisofs' argument list. It's the default for version 1.12.1 and up and causes mkisofs to fail if present.
Add $FreeBSD$ while I'm here.
Ok'ed by: jkh
|
60540 |
14-May-2000 |
kris |
Add /bin/tcsh for completeness
Submitted by: knu
|
60068 |
06-May-2000 |
kris |
Note that ports-base is a mandatory collection and your ports will not build correctly if it is not kept up to date.
Hopefully this will help with the flood of ".tar.gz" questions we've been seeing everywhere lately.
|
59897 |
02-May-2000 |
joe |
Disconnect libm from the build tree. It's broken, not being maintained, and has been replaced by msun. The libm sources shouldn't be removed just yet as there are parts that should be merged into msun first.
PR: misc/17848 Discussed with: phk & bde
|
59884 |
02-May-2000 |
chuckr |
Cause modules to build with the kernel build. Modules are removed from the sys Makefile's SUBDIRs. This is conditioned in make.conf by the NO_MODULES variable and the existence of the modules directory. The actual location of the modules is not modified. Changes in Makefiles only, this does not affect Peter's recent changes.
Reviewed by: Peter Wemm, who warned me I would get some flack, and he had the good idea for the NO_MODULES variable.
|
59712 |
27-Apr-2000 |
n_hibma |
make the example compile again.
The makefile contains a reference to /sys/dev/ppbus. What really should be done is copy the header files to /usr/include/sys/dev/ppbus.
PR: kern/16767 Submitted by: Jin Guojun (FTG staff) <jin@gracie.lbl.gov>
|
59711 |
27-Apr-2000 |
n_hibma |
Remove a warning
|
59650 |
26-Apr-2000 |
obrien |
"r" devices are on their way out.
|
59541 |
23-Apr-2000 |
phantom |
Suggest to use .Lb macro in 2nd/3rd section manpages.
|
59439 |
20-Apr-2000 |
hm |
removed some obsolete information and dead links. Noticed by: Alexander Werner Skwar
|
59338 |
17-Apr-2000 |
obrien |
Document NO_TCSH knob.
|
59203 |
13-Apr-2000 |
sheldonh |
Add an example refuse file.
PR: 17972 Submitted by: Michael Lucas <mwlucas@blackhelicopters.org>
|
59152 |
11-Apr-2000 |
brian |
Show an example of not letting NetBIOS traffic keep the link up
PR: 17865 Submitted by: Glenn Johnson <glennpj@bayouhome.net>
|
59124 |
10-Apr-2000 |
asmodai |
Document NO_BIND toggle flag.
PR: 17710 Submitted by: Mark Huizer <xaa+sendpr@dohd.cx>
|
59006 |
04-Apr-2000 |
obrien |
Add an example of how to tweak CXXFLAGS in a make.conf file.
This is in responce to several people breaking their world builds by incorrectly assigning to CXXFLAGS.
|
58979 |
03-Apr-2000 |
iwasaki |
Enable etc/defaults/pccard.conf which is default configuration file for pccardd. Please install /etc/defaults/pccard.conf and update /etc/defaults/rc.conf as well. Note that old pccard.conf.sample still remains for while but no longer to be maintained.
Reviewed by: imp, -mobile ML and nomads ML in Japan.
|
58859 |
31-Mar-2000 |
sheldonh |
Add a NO_MAILWRAPPER knob to make.conf and wrap it around mailwrapper(8) for folks who find it annoying to have their development version of sendmail blown away by ``make world''.
PR: 17394
|
58648 |
27-Mar-2000 |
kris |
Update CFLAGS documentation
|
58636 |
26-Mar-2000 |
brian |
resolf.conf -> resolv.conf; charnier
|
58591 |
26-Mar-2000 |
billf |
Remove evidence proving that I just copied these files from standard-supfile and put some more specific examples in www-supfile.
PR: docs/17600 Discovered by: Denis Mittsev <dm@dmhome.orsk.ru>
|
58449 |
22-Mar-2000 |
nik |
Add the DOC_LANG variable, and associated documentary comments.
|
58418 |
21-Mar-2000 |
obrien |
Add a knob to turn off the mostly static docs (src/share/doc/).
On a K6-2/450 with fairly fast SCSI disks, building+installing src/share/ takes 2m51.3s, where src/share/doc/ is 1m9.9s of that.
However on a slow Alpha (233MHz) the times are 7m39.3s and 4m58.3s respectively.
This commit allows one to speed up their build time, without not getting any important and required changes if one used "NOSHARE".
|
58390 |
20-Mar-2000 |
dan |
Document NOUUCP switch
|
58280 |
19-Mar-2000 |
kris |
Add and document a NO_X knob to force disabling of X support in doscmd
Requested by: sysop@silver.komanda.com.ua
|
58001 |
13-Mar-2000 |
dcs |
RELENG_4 cvsup files. I'm betting these names are going to be changed, but by virtue of no one else getting to do this after I mentioned it, they get to be named this for now.
|
57772 |
05-Mar-2000 |
jdp |
Add src-kerberos5 to example supfiles.
|
57764 |
05-Mar-2000 |
kris |
Document NO_OBJC for disabling Objective C support
|
57603 |
29-Feb-2000 |
kris |
Document NODESCRYPTLINKS
|
57580 |
29-Feb-2000 |
mjacob |
Update SES userland examples to something out of the toy stage. Approved: jkh
|
57553 |
28-Feb-2000 |
kris |
Update the description of NOCRYPT and NOSECURE to match reality.
|
57542 |
27-Feb-2000 |
kris |
Document the following buildworld knobs:
NO_FORTRAN NOCRYPT NOGAMES NOINFO NOLIBC_R NOSECURE NOSHARE
|
57541 |
27-Feb-2000 |
kris |
Document NOPERL for disabling building of PERL altogether.
|
57522 |
26-Feb-2000 |
shin |
Add IPv6 related docs.
Reviewed by: phantom
|
57458 |
24-Feb-2000 |
markm |
Add userland tweakables for OpenSSH and OpenSSL.
|
57071 |
09-Feb-2000 |
rwatson |
Intoduce a new make.conf entry, NO_MAKEDEV, and modifications to /etc/Makefile so that if it is defined, MAKEDEV all is not called during a make distribution. This helps clean up the messy userland in jail(), by reducing the number of devices exposed in jail. Modifications to jail(2) to follow.
Approved by: jkh-arius
|
56840 |
29-Jan-2000 |
sos |
Dont confuse our users with this, the ata driver uses burncd.
|
56706 |
28-Jan-2000 |
archie |
Add another netgraph example. This one shows how to set up a simple UDP tunnel between two subnets.
|
56704 |
27-Jan-2000 |
brian |
Add some practical filter examples.
|
56687 |
27-Jan-2000 |
sumikawa |
Remove 'USE_INET6' define. Now we check IPv6 ability by 'OSVERSION'
Suggested by: asami
|
56553 |
24-Jan-2000 |
markm |
Add a (commented out) macro that will, when uncommented, cause Kerberos5 (AKA Heimdal) to be built. Suitable admonishments about the experimental state of this code are included.
SEROUS HACKERS ONLY!!
|
56072 |
15-Jan-2000 |
mjacob |
Add a minimal example set of how to use the SES ioctls to monitor SES/SAF-TE devices. It's usable enough (in chpmon) to be alerted as you'd like to be if a powersupply goes south.
|
55805 |
11-Jan-2000 |
asmodai |
Change the /usr/src mention to /usr/doc, since it is a doc supfile.
PR: 15974 Submitted by: Vivek Khera <khera@kciLink.com>
|
55660 |
09-Jan-2000 |
phantom |
Remove binary files from source tree
|
55600 |
08-Jan-2000 |
sumikawa |
Add new define USE_INET6, which enbale IPv6 support on certain packages.
Approved by: asami Reviewed by: billf
|
55427 |
05-Jan-2000 |
brian |
Add protocol to ``nat port'' examples - it's mandatory.
Suggested by: Mark Knight <markk@knigma.org>
|
55247 |
29-Dec-1999 |
brian |
The '-' character in chat scripts should only be escaped twice (since the parsing routines were fixed).
|
54670 |
16-Dec-1999 |
billf |
Add DOCSUPFILE, like PORTSSUPFILE. (ie 'make update' in /usr/doc)
PR: docs/15439 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> Obtained from: ports/Makefile
|
54611 |
14-Dec-1999 |
hm |
update to isdn4bsd beta release 0.90
|
54593 |
14-Dec-1999 |
billf |
Use the traditional bmake magic.
Reviewed/approved by: sos
|
54592 |
14-Dec-1999 |
billf |
-Wall.
Reviewed/approved by: sos
|
54500 |
12-Dec-1999 |
dillon |
Make the cvs-supfile cover the entire repository - add the doc hierarchy.
Approved by: jkh
|
54351 |
09-Dec-1999 |
marcel |
Revert previous commit.
Requested by: bde
|
54340 |
08-Dec-1999 |
mpp |
Make share/examples/mdoc and share/misc/mdoc.template internally consistent, and consistent with mdoc(7) and mdoc.samples(7).
PR: doc/15352, doc/15353
|
54312 |
08-Dec-1999 |
marcel |
Remove support for symlinks instead of copies. This also avoids using mtree. Space is being saved by other means.
|
53913 |
30-Nov-1999 |
archie |
Add two new generic control messages, NGM_ASCII2BINARY and NGM_BINARY2ASCII, which convert control messages to ASCII and back. This allows control messages to be sent and received in ASCII form using ngctl(8), which makes ngctl a lot more useful.
This also allows all the type-specific debugging code in libnetgraph to go away -- instead, we just ask the node itself to do the ASCII translation for us.
Currently, all generic control messages are supported, as well as messages associated with the following node types: async, cisco, ksocket, and ppp.
See /usr/share/examples/netgraph/ngctl for an example of using this.
Also give ngctl(8) the ability to print out incoming data and control messages at any time. Eventually nghook(8) may be subsumed.
Several other misc. bug fixes.
Reviewed by: julian
|
53540 |
21-Nov-1999 |
brian |
An example of how to configure PPPoE.
|
53411 |
19-Nov-1999 |
julian |
Add an example of how to run raw IP across a sync port.
|
53410 |
19-Nov-1999 |
julian |
Add an example of how to set up a frame relay link using netgraph and the 'sr' sync card.
|
53229 |
16-Nov-1999 |
joe |
Added $FreeBSD$ idents.
|
53013 |
08-Nov-1999 |
yokota |
- This is the new version of libvgl jointly developed by sos and I. It adds new functions and extend some structures and can handle VESA modes. - Update the man page. - Bump the library version number.
(The old version will be added to compat3x.)
|
52839 |
03-Nov-1999 |
bp |
Add examples for a mount_nwfs command.
|
51967 |
06-Oct-1999 |
brian |
5 minutes == 300 seconds, not 600 !
Submitted by: Robert Inder <R.Inder@ed.ac.uk>
|
51939 |
04-Oct-1999 |
ru |
Recommend "secure-stable-supfile" instead of "secure-supfile".
|
51894 |
03-Oct-1999 |
brian |
Set the i4b bandwidth - i4b doesn't report it via tcgetattr.
Suggested by: Joe Karthauser <joe@uk.FreeBSD.org>
|
51787 |
29-Sep-1999 |
dcs |
Fixes a silly bug that somehow escaped my notice all these months.
|
51700 |
26-Sep-1999 |
brian |
Show an example of ``set cd off''
|
51521 |
21-Sep-1999 |
sos |
Update so that only whole blocks are written to disk, the system has dislearned how to handle != blocksize request to the raw/char device.
|
51334 |
16-Sep-1999 |
brian |
Suggest using just finrst in the dial filter, and not syn.
Submitted by: Ruslan Ermilov <ru@FreeBSD.org>
|
51299 |
15-Sep-1999 |
peter |
Add a hook for disabling cvs and collect a few similar options together. (We do this on freefall as we use a tweaked /usr/bin/cvs wrapper)
|
51050 |
07-Sep-1999 |
brian |
Show how to prioritize UDP packets
|
51049 |
07-Sep-1999 |
brian |
alias -> nat
|
50883 |
04-Sep-1999 |
markm |
Knob for Perl thread support.
|
50710 |
31-Aug-1999 |
jdp |
Add ports-irc, ports-java, and ports-x11-servers. For some reason these made it into the RELENG_3 branch but not into -current.
|
50708 |
31-Aug-1999 |
jdp |
Adjust the examples to reflect the new "src-sys-crypto" collection.
Add back "src-eBones" to "cvs-supfile" and "secure-cvs-supfile". Even though the eBones tree is disused, it still has files in the repository. People fetching the repository might want them.
|
50535 |
28-Aug-1999 |
mpp |
Add $FreeBSD$ lines to these example man pages, along with a note that says all man pages should contain a FreeBSD revision control id to make it easier for translation teams.
|
50476 |
28-Aug-1999 |
peter |
$Id$ -> $FreeBSD$
|
50472 |
27-Aug-1999 |
peter |
$Id$ -> $FreeBSD$
|
50192 |
22-Aug-1999 |
brian |
Decrease the isdn recovery time to 1 second and mention that it should always be less than ppps redial timeout.
|
49981 |
17-Aug-1999 |
brian |
Add a second arg to ``set timeout'' as an example of a minimum idle period.
|
49977 |
17-Aug-1999 |
brian |
Use ``set openmode passive'' in the ssh VPN example
|
49935 |
16-Aug-1999 |
gibbs |
Add a cleanup handler called "atexit" to make sure we free up target mode instances.
Print out exception information passed out from the kernel target mode driver to this userland daemon.
|
49777 |
14-Aug-1999 |
sheldonh |
Don't force compression in SUPFLAGS, since that effectively negates the functionality of the compression option in the supfile.
Reported by: Ben Rosengart <ben@skunk.org>
|
49584 |
09-Aug-1999 |
brian |
Add an example of an isdnd.rc that works with ppp.
|
49583 |
09-Aug-1999 |
brian |
Add an example of an isdn profile.
|
49460 |
06-Aug-1999 |
hm |
updating isdn4bsd to beta version 0.83
|
49369 |
02-Aug-1999 |
asami |
Add ports-ftp.
|
49190 |
28-Jul-1999 |
nik |
Explicitly list the i/o addresses of the serial ports.
Prompted by docs/12343, in which people seemed to get a little confused. The original text in the file said:
[...] # By default we use COM1 as our serial console port *if* we're going to use # a serial port as our console at all. (0x3E8 = COM2) # #BOOT_COMCONSOLE_PORT= 0x3F8 [...]
From what I can make out, some people have assumed that means that if they just uncomment the BOOT_COMCONSOLE_PORT then it will use COM2: These same people then assume that "0x3F8" on that line is a typo for "0x3E8".
What it actually means is that if you uncomment the line then the default stays as "Ox3F8" (COM1:), and that you have to uncomment the line, *and* change the value of the variable in order to use COM2:.
So I've made that a little bit clearer. I've also listed the hex values for COM1: thru COM4:, snarfed from sys/isa/isareg.h.
PR: docs/12343 Submitted by: Bill Grunfelder <wjgrun@dippy.cyberwar.com>
|
49141 |
27-Jul-1999 |
brian |
Show how to use the new filter capabilities
Mostly submitted by: Peter Jeremy <jeremyp@gsmx07.alcatel.com.au>
|
48277 |
27-Jun-1999 |
sheldonh |
Do nothing for the etc-examples target when SHARED=symlinks, since we'll end up trying to install into the source directory.
Reported by: bde
|
48275 |
27-Jun-1999 |
dfr |
* Tidy up a few things and fix some more warnings. * Change the devsw declaration to standard form and add missing fields * Change the filename from cdev_mod.ko to cdev.ko
|
48212 |
25-Jun-1999 |
dfr |
Make this sample build again.
|
48185 |
24-Jun-1999 |
sheldonh |
Actually install the virgin copies of the /etc files that we so proudly claim to install in /usr/share/examples/etc/README.examples .
PR: 5207 Reported by: "Wayne M. Barnes" <wayne@barnes1.wustl.edu>
|
47857 |
09-Jun-1999 |
brian |
Add a rather complicated but impressive example of how to implement multi-link ppp over more than one ISP with the ability to lose ISPs without loss of connectivity.
It *requires* that you either have administrative access to a machine that's already connected to the 'net or at least know a really nice person that does.
|
47726 |
04-Jun-1999 |
billf |
sunsite is now metalab.
|
47651 |
01-Jun-1999 |
billf |
'make update' in the ports directory.
|
47634 |
30-May-1999 |
billf |
procedure, not proceedure.
|
47480 |
25-May-1999 |
jdp |
Remove references to the obsolete src-eBones collection.
PR: conf/11873
|
47430 |
23-May-1999 |
obrien |
Get case right in "COMPAT3X".
Submitted by: Kevin Street <street@iname.com>
|
47338 |
20-May-1999 |
hm |
upgrade isdn4bsd from version 0.71 to the just released version 0.81
|
47318 |
19-May-1999 |
obrien |
Add a commented out COMPAT22 and COMPAT3x, since we have the others.
|
47200 |
14-May-1999 |
dcs |
Rewording.
|
47199 |
14-May-1999 |
dcs |
Slight not-exactly-bug-but-useful-as-example-code fix.
|
47195 |
14-May-1999 |
dcs |
Add a menu example making use of loader.4th(8) facilities.
Merge candidate, as it is just an example...
|
47078 |
12-May-1999 |
billf |
Add doc-supfile and www-supfile, for those who'd like to track those repositories.
On a side note, I think www should be called www-all, like all of our other collections.
Requested By: jesusr No Problems: jdp
|
46242 |
02-May-1999 |
obrien |
Remove NOPERL. Seems to cause too many problems, as those that try don't understand the implications and don't think to undo it when they get experience trouble. (wonder about some of the people running -CURRENT sometimes)
|
46103 |
27-Apr-1999 |
brian |
Specify the ssh command to use for a VPN inline.
|
46030 |
24-Apr-1999 |
peter |
Zap lkm examples, they don't do anything anymore.
|
45648 |
13-Apr-1999 |
hm |
Make sending the postcard optional (as suggested by phk).
|
45460 |
08-Apr-1999 |
asami |
Remove ports-plan9, add ports-palm.
PR: 11019 Submitted by: mharo@area51.fremont.ca.us (ports-supfile only)
|
45070 |
28-Mar-1999 |
brian |
Increase the timeout and wait for ``PPP'' in the compuserve example.
Submitted by: MALCOLM BOFF <Malcolm_Boff@compuserve.com>
|
44877 |
19-Mar-1999 |
msmith |
more $d -> %d fixes
|
44876 |
19-Mar-1999 |
msmith |
Fix some $d -> %d mistakes.
Submitted by: crb@crbowman.erols.com
|
44755 |
14-Mar-1999 |
markm |
Bitrot. Remove objlink as it is not pleasant to be downwind.
PR: 8071 Reviewed by: Sheldon Hearn <sheldonh@iafrica.com>
|
44748 |
14-Mar-1999 |
billf |
Bring in some MASTER_SITE_{AFTERSTEP,WINDOWMAKER} from bsd.port.mk
|
44555 |
07-Mar-1999 |
hm |
update misc i4b documentation to i4b release 0.71.00
|
44498 |
05-Mar-1999 |
gibbs |
Allocate a target mode instance to handle our target mode session, clean it up on exit. The address for attaching the emulator (path, target id, lun) is now specified on the command line. Some attempt at cathing signals and cleaning up target mode instances is now made.
|
43948 |
13-Feb-1999 |
brian |
Add some examples of how to throw a window up on your display when the peer demands authentication, and add some more detail to the example configurations.
This is the first time I've written any TCL, so I'd appreciate it if someone eyeballed the *-auth stuff and fixed any glaring problems.
|
43907 |
11-Feb-1999 |
jdp |
Use the fictional server "CHANGE_THIS.FreeBSD.org". Add comments telling the user to (duh) change it.
|
43906 |
11-Feb-1999 |
jdp |
RELENG_3 is now "the" stable branch.
|
43905 |
11-Feb-1999 |
jdp |
Replace the out-of-date list of mirror sites with a reference to the list in the FreeBSD Handbook.
|
43902 |
11-Feb-1999 |
brian |
Add ppp example files.
|
43808 |
09-Feb-1999 |
dillon |
Update diskless and templated booting examples
|
43653 |
05-Feb-1999 |
jkh |
Indicate that LKMs are obsolete, just to prevent confusion.
|
43570 |
03-Feb-1999 |
asami |
Remove commented out definition of FTP_PASSIVE_MODE, it is (and has always been) an environment variable and doesn't belong here.
Pointed out by: cnh@ems.mindspring.net, sanpei@yy.cs.keio.ac.jp
|
43435 |
30-Jan-1999 |
jdp |
Remove the SVR4 examples. Folks, no binaries are allowed in the repository. Also no uuencoded files should be added.
|
43422 |
30-Jan-1999 |
newton |
Added examples for svr4 /compat trees.
|
43336 |
28-Jan-1999 |
jkh |
Update example to match new builtin behavior.
Submitted by: Daniel C. Sobral <dcs@newsguy.com> PR: 9744
|
43247 |
26-Jan-1999 |
dillon |
Clarify documentation of 'ME' softlink.
|
43240 |
26-Jan-1999 |
dillon |
Diskless and templating configuration examples
|
43107 |
23-Jan-1999 |
rnordier |
Fix wrong exit code. PR: 9321 Submitted by: Bob Van Valzah <Bob@whitebarn.com>
|
42876 |
20-Jan-1999 |
asami |
Change MASTER_SITE_BACKUP to point to new dir on wcarchive. Merge some MASTER_SITE_* macros from latest bsd.port.mk.
|
42802 |
18-Jan-1999 |
hm |
Add ISDN (i4b) documentation and examples
|
42525 |
11-Jan-1999 |
peter |
Remove the example for setting KERNFORMAT=elf; it is the default already.
|
42436 |
09-Jan-1999 |
dfr |
Use modstat(2) to get the syscall number.
|
42434 |
09-Jan-1999 |
dfr |
Replace the misc example with a simpler syscall example using the new module registration hooks for syscalls.
Submitted by: Assar Westerlund <assar@sics.se>
|
42325 |
06-Jan-1999 |
obrien |
make comments more consistant
|
42210 |
31-Dec-1998 |
abial |
Add timeout to boot menu.
Submitted by: W Gerald Hicks <wghicks@bellsouth.net>
|
42004 |
22-Dec-1998 |
abial |
Add examples how to use the terminal emulation code in /boot/loader to create nice startup menus. Improvements are warmly welcome. :-)
|
41829 |
15-Dec-1998 |
dillon |
Add portal example
PR: misc/8796
|
41690 |
11-Dec-1998 |
phk |
Add working client and server sample applications.
Submitted by: Mike Spengler <mks@circe.networkcs.com>
|
41681 |
11-Dec-1998 |
dfr |
Sample modules for KLD.
PR: misc/8621 Submitted by: Rajesh Vaidheeswarran <rv@fore.com>
|
41643 |
10-Dec-1998 |
gibbs |
Remove debugging printfs.
|
41604 |
08-Dec-1998 |
billf |
Use quotes around the first_line variable so C comments and other things that are misinterpreted by echo(1) aren't.
PR: docs/8757 Submitted By: Takeshi OHASHI <ohashi@mickey.ai.kyutech.ac.jp> Sergei Laskavy <laskavy@gambit.msk.su>
|
40592 |
22-Oct-1998 |
bde |
FIxed a bogus comment.
|
40591 |
22-Oct-1998 |
bde |
Removed all `vector xxxintr' specifications. Interrupt handlers are now configured in drivers.
Attempted to update the generated interrupt handler attachment to the current "temporary" method. Not tested. To test it, someone would first have to fix the bitrot in the ioctl command arg type.
|
40430 |
16-Oct-1998 |
peter |
Commented out example of changing the default kernel format with warning.
|
39232 |
15-Sep-1998 |
phk |
Add new files for HARP3
Host ATM Research Platform (HARP), Network Computing Services, Inc. This software was developed with the support of the Defense Advanced Research Projects Agency (DARPA).
|
39215 |
15-Sep-1998 |
gibbs |
SCSI Target userland process example. Provides/Dumps the data related to RECEIVE/SEND processor target requests to the "targ" sample target mode driver.
|
39096 |
12-Sep-1998 |
sos |
Two little examples for use with the new atapi CD-R/RW driver Use to burn data & audio CD's
|
38738 |
02-Sep-1998 |
brian |
Add Id keywords
|
38616 |
29-Aug-1998 |
phk |
fix a typo
|
38613 |
29-Aug-1998 |
dillon |
make.conf.local test/include removed from make.conf, to be put in sys.mk instead.
|
38565 |
26-Aug-1998 |
dillon |
Reviewed by: asami@freebsd.org (Satoshi Asami)
Give make.conf a make.conf.local capability similar to rc.conf's rc.conf.local capability. Eases large-site administration.
|
38206 |
09-Aug-1998 |
asami |
Oops, forgot my source tree is at RELENG_2_2...MF22. (Add new categories ports-deskutils, ports-x11-{clocks,fm,fonts,toolkits,wm}.)
|
38192 |
08-Aug-1998 |
alex |
Typo fix. The PR suggested that "save are for old callslot entry" should be "slot area for old callslot entry", but I think "save area for old callslot entry" is what was intended.
PR: 7526
|
38190 |
08-Aug-1998 |
alex |
cince --> since
PR: 7525 Submitted by: ziggy@ryan.org
|
38003 |
01-Aug-1998 |
dima |
Introduce KRB5_HOME variable.
|
37164 |
26-Jun-1998 |
jkh |
MF22: doc pointer.
|
37162 |
26-Jun-1998 |
jkh |
MF22: die sup die.
|
36263 |
20-May-1998 |
jkh |
Back out locale change until it's better understood by all just what it is we're trying to do here. :) OK'd by: asami
|
36188 |
19-May-1998 |
thepish |
PR: misc/6031
Patch applied as per PR - enables preferential fetch from local mirrors
|
35849 |
08-May-1998 |
phk |
Add a crucial missing _ in NO_SENDMAIL
PR: 6545 Reviewed by: phk Submitted by: Jos Backus <jbackus@plex.nl>
|
35332 |
20-Apr-1998 |
jb |
Add an example supfile for the gnats database.
Submitted by: A Joseph Koshy <koshy@india.hp.com>
|
35222 |
16-Apr-1998 |
ache |
Add commented out common INSTALL and FORCE_PKG_REGISTER knobs
|
35221 |
16-Apr-1998 |
ache |
Add missing commented out MOTIF_STATIC example
|
35206 |
15-Apr-1998 |
phk |
In light of the fact that several widespread sendmail alternatives exists is reason enough to make the compilation & installation of sendmail an make.conf option. I know that you hate negative options Bruce.
PR: 6284 Reviewed by: phk Submitted by: Adrian Colley <aecolley@world.std.com>
|
34984 |
01-Apr-1998 |
charnier |
.Sh AUTHOR -> .Sh AUTHORS.
|
34890 |
26-Mar-1998 |
dima |
Don't build sperl if you don't want to.
|
34654 |
18-Mar-1998 |
jkh |
style tweak.
|
34651 |
18-Mar-1998 |
jkh |
Document NOPERL
|
34113 |
06-Mar-1998 |
jkh |
MF22: add ports-biology
|
33980 |
02-Mar-1998 |
jkh |
syntax error in /usr/share/examples/sliplogin/slip.hosts PR: 5873 Submitted by: Ruslan Ermilov <ru@ucb.crimea.ua>
|
33880 |
27-Feb-1998 |
fenner |
Convert ${MASTER_SITE_SUBDIR} to %SUBDIR% as in bsd.port.mk rev 1.257
|
33878 |
27-Feb-1998 |
asami |
Fix path in commented-out sample of MASTER_SITE_TEX_CTAN.
PR: 5861 Submitted by: kuriyama@opt.phys.waseda.ac.jp
|
32529 |
15-Jan-1998 |
cracauer |
Fix typo
|
32468 |
12-Jan-1998 |
julian |
Add code to the example 'driver-o-matic' to support being an LKM This may not quite work yet but should head the user in the right direction.
|
32185 |
02-Jan-1998 |
msmith |
Sample program using the ppi(4) interface to control LCD modules. Currently supports the (very common) Hitachi HD44780, but can be easily modified to add other chipsets.
|
32119 |
30-Dec-1997 |
bde |
Remove `retval' from syscall functions here too.
|
32111 |
30-Dec-1997 |
julian |
The example drivers should use 'poll' now that it has replaced select.
|
30465 |
16-Oct-1997 |
sos |
Add a little example on libvgl usage.
|
30229 |
08-Oct-1997 |
jkh |
Back out my last commit - the trailing / should stay and fetch(1) should stop puking on null directory components.
|
30226 |
08-Oct-1997 |
jkh |
Remove trailing slash from MASTER_SITE_BACKUP example since it can lead to two trailing /'s, which is in turn an invalid URL (just bit me :-).
|
30069 |
03-Oct-1997 |
jkh |
Correct typo. PR: 4681 Submitted by: Masahiro Sekiguchi <seki@sysrap.cs.fujitsu.co.jp>
|
30047 |
02-Oct-1997 |
jkh |
src-contrib-crypto is now just src-crypto (unless the user wants to see tons of stuff in an Attic).
|
29949 |
28-Sep-1997 |
jkh |
Document the ever decreasingly popular USA_RESIDENT variable.
|
29931 |
28-Sep-1997 |
markm |
Final commit for KTH KerberosIV. -DMAKE_EBONES -> -DMAKE_KERBEROS4
|
29763 |
24-Sep-1997 |
jdp |
Add the "src-kerberosIV" collection.
|
29281 |
10-Sep-1997 |
jkh |
By popular request, change the default suggested value for CFLAGS and also note that COPTFLAGS is _just_ for the kernel and CFLAGS just for userland.
|
29209 |
07-Sep-1997 |
joerg |
src/share/doc -> doc
|
29125 |
05-Sep-1997 |
jdp |
Add cvsup.ca.FreeBSD.org.
|
29079 |
03-Sep-1997 |
jdp |
"Stable" now means RELENG_2_2.
|
28336 |
18-Aug-1997 |
jdp |
Agnus Dei, qui tollis peccata mundi, dona eis requiem sempiternam.
|
28323 |
17-Aug-1997 |
jdp |
Add new CVSup mirror sites.
|
27948 |
07-Aug-1997 |
jdp |
Add cvsup2.ua.freebsd.org. Rename the MIT mirror to cvsup3.freebsd.org.
|
27792 |
31-Jul-1997 |
asami |
Add new ports-german collection.
|
27776 |
31-Jul-1997 |
jdp |
Add cvsup.uk.freebsd.org.
|
27771 |
30-Jul-1997 |
jdp |
Update the list of CVSup mirror sites.
|
27597 |
22-Jul-1997 |
jdp |
Add a warning about how to add ports collections to this cvsupfile (and how NOT to add them).
|
27085 |
29-Jun-1997 |
bde |
Implemented `-c command'.
Fixed bitrot (__dead went away; EOF is now wrong for the getopt failure value).
Moved sleep command to the end of the main loop to avoid mismatch between main loop and the report loop. There is an extra iteration that could be used to calibrate the loop overhead, but was used to report wrong results.
Fixed usage message.
|
26705 |
18-Jun-1997 |
alex |
Typo police.
|
26522 |
09-Jun-1997 |
bde |
Updated serial console options.
|
25937 |
19-May-1997 |
jmz |
The 'wormcontrol select' command no more exists.
|
25933 |
19-May-1997 |
jdp |
Include the new "src-contrib-crypto" collection.
|
25813 |
14-May-1997 |
jkh |
mkisofs.new -> mkisofs (whoops! just noticed this)
|
25424 |
03-May-1997 |
andreas |
synchronize with bsd.doc.mk (long outstanding fix) PR: closes docs/3479
|
25183 |
27-Apr-1997 |
asami |
Add ports-converters and ports-textproc targets.
|
24973 |
16-Apr-1997 |
danny |
Suggested by: David Nugent Change the name of ppp.disabled to ppp.deny for consistency with at.deny and friends.
|
24951 |
15-Apr-1997 |
asami |
Add comments about overridable MASTER_SITE_* variables.
Suggested by: Narvi <narvi@haldjas.folklore.ee>
|
24944 |
15-Apr-1997 |
danny |
List of users who may not use pppd in system password logins, and a sample list of acceptable shells.
|
24867 |
13-Apr-1997 |
bde |
Removed bogus unused #include.
|
24866 |
13-Apr-1997 |
bde |
Removed bogus unused #include.
|
24865 |
13-Apr-1997 |
bde |
Updated to use new MOD_SYSCALL() and MOD_DISPATCH() macros.
Removed bogus unused #include and unused #includes.
|
24860 |
13-Apr-1997 |
jkh |
Add a -b option to make the resulting CDROM image bootable (requires new mkisofs 1.10 port).
|
24674 |
06-Apr-1997 |
dufault |
Make MOD_* macros almost consistent:
Use the name argument almost the same in all LKM types. Maintain the current behavior for the external (e.g., modstat) name for DEV, EXEC, and MISC types being #name ## "_mod" and SYCALL and VFS only #name. This is a candidate for change and I vote just the name without the "_mod".
Change the DISPATCH macro to MOD_DISPATCH for consistency with the other macros.
Add an LKM_ANON #define to eliminate the magic -1 and associated signed/unsigned warnings.
Add MOD_PRIVATE to support wcd.c's poking around in the lkm structure.
Change source in tree to use the new interface.
Reviewed by: Bruce Evans
|
24565 |
03-Apr-1997 |
jmg |
arg... add back the "stray" `-' (it is used by indent)
|
24544 |
02-Apr-1997 |
jmg |
remove a stray `-'
|
24525 |
02-Apr-1997 |
mpp |
Remove some garbage text.
|
24430 |
31-Mar-1997 |
scrappy |
Remove MAKEFLAGS example from /etc/make.conf...
Bruce points out that it breaks things if someone doesn't do a 'make depend', but I just found out that it breaks 'make depend' itself :(
|
24422 |
30-Mar-1997 |
scrappy |
Add/document MAKEFLAGS into /etc/make.conf, using -j3 as example
|
24225 |
25-Mar-1997 |
joerg |
top(1) has a tunable parameter for the hash size to hash the user entries. Mention it in make.conf.
|
24066 |
20-Mar-1997 |
mpp |
Use the .An macro in the AUTHOR section.
|
24056 |
19-Mar-1997 |
mpp |
Update to use the .Rv macro now that I know it exists :-).
|
23425 |
06-Mar-1997 |
asami |
Add ports-korean.
|
23424 |
06-Mar-1997 |
asami |
Add ports-korean.
|
23199 |
28-Feb-1997 |
bde |
Synced with the C example copyright. Cosmetic except for removing clause 3, which was removed on 1996/08/03 in the C example.
|
23198 |
28-Feb-1997 |
bde |
Show where the version control id should go.
|
23197 |
28-Feb-1997 |
bde |
Changed the example copyright to be closer to the ones that we actually use: - don't put [your name] on a a separate line. Most authors have shorter names than "The Regents of the University of California". - don't repeat [your name].
|
23130 |
26-Feb-1997 |
mpp |
Remove the -lrpclib, since it causes the build of these examples to fail.
Closes PR# 2359
Submitted by: Pedro A M Vazquez <vazquez@IQM.Unicamp.BR>
|
23037 |
23-Feb-1997 |
peter |
Revert $FreeBSD$ to $Id$
|
22988 |
22-Feb-1997 |
peter |
Revert $FreeBSD$ to $Id$
|
22853 |
17-Feb-1997 |
mpp |
These will appear in 2.2, not 3.0.
Pointed out by: wosch
|
22808 |
16-Feb-1997 |
bde |
Select between the generic math functions and the i387-specific ones at runtime.
etc/make.conf: Nuked HAVE_FPU option.
lib/msun/Makefile: Always build the i387 objects. Copy the i387 source files at build time so that the i387 objects have different names. This is simpler than renaming the files in the cvs repository or repeating half of bsd.lib.mk to add explicit rules.
lib/msun/src/*.c: Renamed all functions that have an i387-specific version by adding `__generic_' to their names.
lib/msun/src/get_hw_float.c: New file for getting machdep.hw_float from the kernel.
sys/i386/include/asmacros.h: Abuse the ENTRY() macro to generate jump vectors and associated code. This works much like PIC PLT dynamic initialization. The PIC case is messy. The old i387 entry points are renamed. Renaming is easier here because the names are given by macro expansions.
|
22698 |
14-Feb-1997 |
jmg |
some stylistic changes... "you name here" and "you name" to "your name"
2.2 Candidate
|
22638 |
13-Feb-1997 |
jkh |
Document FTP_PASSIVE_MODE in the place where I usually set it.
|
22197 |
02-Feb-1997 |
julian |
Description of what the files in this directory do.. (create sample device drivers on request)
|
22195 |
02-Feb-1997 |
julian |
These two shell scripts will create a skeleton device driver. one for a real device and the other for a pseudo device. they each take one argument which is the name (prefix) for the driver.
they add the new file to the /sys tree and add appropriate config files etc for a build.
hopefully others will build on this so that we get 1/ these drivers improved and the shell scripts improved in how/where that hook the new code in. 2/ similar tools for providing skeletons for other modules (I'm tempted to do a VFS filesystem skeleton :)
please take a look and fix anything that maybe should be added. they compile and link fine, but I think I wouldn't trust them, as faar as RUNNING yet :) (well they really wouldn't do very much being skeletons..
we need to add PCI and EISA skeletons as well followed by a SCSI driver skeleton.
|
22174 |
01-Feb-1997 |
jdp |
Update the list of CVSup mirror sites.
|
21786 |
16-Jan-1997 |
alex |
Sweep through the tree fixing mmap() usage:
- Use MAP_FAILED instead of the constant -1 to indicate failure (required by POSIX). - Removed flag arguments of '0' (required by POSIX). - Fixed code which expected an error return of 0. - Fixed code which thought any address with the high bit set was an error. - Check for failure where no checks were present.
Discussed with: bde
|
21673 |
14-Jan-1997 |
jkh |
Make the long-awaited change from $Id$ to $FreeBSD$
This will make a number of things easier in the future, as well as (finally!) avoiding the Id-smashing problem which has plagued developers for so long.
Boy, I'm glad we're not using sup anymore. This update would have been insane otherwise.
|
21453 |
09-Jan-1997 |
mpp |
Update the copyright notices to match our bsd-copyright example.
|
21449 |
09-Jan-1997 |
mpp |
Add some real example diagnostics to example.[14]
Add all of the possible errno's to example.3.
Show examples of the .Bx (BSD) and .At (AT&T UNIX) macros in the various HISTORY sections.
Add some .Rs/.Re (used for referencing things other than man pages) in the SEE ALSO sections.
Suggested by: wollman
|
21240 |
02-Jan-1997 |
wosch |
printing examples, automatically generated from src/share/doc/handbook/printing.sgml with src/tools/tools/epfe/epfe.pl
|
21239 |
02-Jan-1997 |
mpp |
Correct one minor style point.
|
21235 |
02-Jan-1997 |
mpp |
Moved these from /usr/share/misc/mdoc to /usr/share/examples/mdoc, since it seemed like a better place, and the makefiles for /usr/share/examples didn't need to be fussed with.
The old stuff can be removed from the Attic.
|
21159 |
01-Jan-1997 |
bde |
Use -C instead of -c for installing non-header source files.
|
20989 |
28-Dec-1996 |
mpp |
Fix typo.
|
20986 |
28-Dec-1996 |
wosch |
a README
|
20942 |
27-Dec-1996 |
jdp |
Add src-release and src-tools collections.
Inspired by: ache
|
20904 |
25-Dec-1996 |
ache |
Add missing src-release and src-tools to individual targets list
|
20847 |
23-Dec-1996 |
peter |
Add commented out samples on how to activate the compat libs during build. Note that nothing is stopping somebody from cd'ing to src/lib/compat/<dist> and doing a 'make all install' there by hand.
|
20545 |
16-Dec-1996 |
ache |
cvsup client moved from sbin to bin
2.2 candidate
|
20488 |
15-Dec-1996 |
jdp |
Update the sample cvsupfiles to take advantage of the new "*default" feature in CVSup-14.0. You no longer need a 200-column window to look at them.
Also did some general cleanups, and corrected some errors.
2.2 candidate. These should be brought directly into 2.2 if at all possible, since they correspond with the CVSup release whose port is going to go into 2.2.
|
20150 |
05-Dec-1996 |
asami |
Add ports-vietnamese, delete ports-distfiles.
|
19834 |
17-Nov-1996 |
wosch |
removeuser moved from /usr/share/examples/removeuser to /usr/sbin/rmuser
|
19619 |
10-Nov-1996 |
jdp |
Correct many errors of commission and omission in the example CVSupfiles.
|
19496 |
07-Nov-1996 |
asami |
Add ports-chinese and ports-mbone.
|
19458 |
06-Nov-1996 |
jkh |
Amend the README to mention "dummy" feature. Nobody will read the README, but at least I can say it's doc'd. :)
|
19457 |
06-Nov-1996 |
jkh |
Since Joerg reminded me, make a small change to this file in order to allow the user to also say: burncd mybigimage dummy
To enable a dummy burn. Saves on blanks during testing. :)
|
19453 |
06-Nov-1996 |
joerg |
Minor bugfix in the cdburn example (one rtprio was missing).
|
19316 |
01-Nov-1996 |
ache |
Add -z to CVSupflags, it iz safe because it is done by zlib, not by extra gzip child
|
19153 |
24-Oct-1996 |
asami |
Add ports-astro.
|
18928 |
14-Oct-1996 |
pst |
catch a mismatch after final review...
|
18927 |
14-Oct-1996 |
pst |
Expose the control mechanism for serial console boot so that the default shipped with freebsd can be changed without modifying the Makefiles directly.
Creates: BOOT_FORCE_COMCONSOLE BOOT_PROBE_KEYBOARD BOOT_PROBE_KEYBOARD_LOCK BOOT_COMCONSOLE (port value for console)
|
18853 |
10-Oct-1996 |
jkh |
Whups, do what I really intended for the copyright string argument here (that's why there's all those shifts! :).
|
18724 |
06-Oct-1996 |
max |
A necessary space was missing. (Sorry for the needless commits.)
|
18723 |
06-Oct-1996 |
max |
Back out my previous change. Pointed Out By: rgrimes
|
18721 |
06-Oct-1996 |
max |
Changed prefix=/usr to prefix=/usr/ports in the collection ports-all, just as other collections.
|
18717 |
05-Oct-1996 |
ache |
Use full path for cvsup
|
18716 |
05-Oct-1996 |
ache |
Add CVSup block (commented out)
|
18680 |
04-Oct-1996 |
jkh |
Relax the argument checking - it caused it to fail in the perfectly legitimate cd-to-worm copy case.
|
18555 |
29-Sep-1996 |
markm |
fix up the secure-* files for cvsup.internat.freebsd.org, and add one for the crypto CVS tree.
(Does this mean...? Yes! Yes! The International Crypto Site is serving CVSUP! Yay! Give the man a Nobel Prize!)
|
18442 |
21-Sep-1996 |
peter |
Remove SHARED_LIBCC_INT sample, it's gone and has been a do-nothing option since the cc1/cc1plus backends were linked static some time ago.
|
18284 |
14-Sep-1996 |
asami |
Add ports-chinese.
|
18074 |
06-Sep-1996 |
jkh |
Do the right thing even if the source tree is a bunch of symlinks, say lndir'd to a CDROM. Submitted-By: Richard Wackerbarth <rkw@shrimp.dataplex.net>
|
17886 |
29-Aug-1996 |
asami |
Change prefix of ports-all from "/usr/ports" to "/usr", so that the ports collection won't end up in "/usr/ports/ports".
Verified by: Steve Passe <smp@csn.net>
|
17878 |
28-Aug-1996 |
ache |
Back out src-tools addition, src-etc target must be fixed instead
|
17869 |
28-Aug-1996 |
ache |
Add missing src-tools
|
17857 |
28-Aug-1996 |
ache |
Add missing src-tools
|
17741 |
21-Aug-1996 |
jkh |
Add cvsup.nl.freebsd.org
|
17729 |
21-Aug-1996 |
jkh |
Whups! Forgot to do my edits for sup.FreeBSD.org -> cvsup.FreeBSD.org before doing the commit.
|
17728 |
21-Aug-1996 |
jkh |
Clean up some of the example docs, add a set of example files for cvsup now that we're actively promoting that service.
|
17512 |
11-Aug-1996 |
wosch |
delete rule 3 (advertising) from copyright
resolve symlinks before removing user's home directory with /bin/rm -rf <home dir>
Submitted by: Guy Helmer <ghelmer@alpha.dsu.edu>
|
17410 |
03-Aug-1996 |
jkh |
Sync copyright notices. Noticed-By: jfieber
|
17399 |
03-Aug-1996 |
nate |
Changes to the SLIP support files to show how to do proxy ARP.
|
17074 |
10-Jul-1996 |
wosch |
This commit was generated by cvs2svn to compensate for changes in r17073, which included commits to RCS files with non-trunk default branches.
|
16751 |
26-Jun-1996 |
phk |
Add the contrib collection to supfiles. (SUP-mirrors take notice !)
|
16668 |
24-Jun-1996 |
nate |
Add the (commented out) OBJLINK hook.
|
16629 |
23-Jun-1996 |
jkh |
Add some examples on burning CDRs - I figured it was about time to document it! :-)
|
16445 |
17-Jun-1996 |
ache |
Remove advertising actions requirement, they are too bothering for anyone
|
15628 |
04-May-1996 |
jkh |
Update the comments at the top of these things to fit reality. Sup hasn't been a package which you need to add on for awhile now. :-) Also mention hooks in /etc/make.conf for `make update' fans.
|
15476 |
30-Apr-1996 |
asami |
Add ports-all and comment out individual ports-*. Add commented out ports-distfiles to ports-supfile. Add explanations.
|
15334 |
21-Apr-1996 |
asami |
Take out quotes around MOTIFLIB. Clarify comments a bit, most users don't have to touch neither X11BASE nor MOTIFLIB.
Reported by: kmitch@phantasma.bevc.blacksburg.va.us
|
15324 |
20-Apr-1996 |
dima |
Added sup5.freebsd.org (burka.rdy.com) Obtained from: DNS :-)
|
15272 |
16-Apr-1996 |
ache |
Back out my MOTIF_STATIC change, it is unnecessary
|
15224 |
13-Apr-1996 |
ache |
Document MOTIF_STATIC
|
15212 |
12-Apr-1996 |
asami |
Add commented-out definitions of HAVE_MOTIF and MOTIFLIB.
|
14896 |
28-Mar-1996 |
wollman |
This commit was generated by cvs2svn to compensate for changes in r14895, which included commits to RCS files with non-trunk default branches.
|
14585 |
12-Mar-1996 |
ache |
Increment network byte order properly Reviewed by: wollman
|
14403 |
06-Mar-1996 |
asami |
Add NOPORTDOCS, similar to NOMANCOMPRESS. It prohibits additional port documentation (which can be things like postscript manuals describing every single of the 65,536 options) from being installed into ${PREFIX}/share/doc.
|
14129 |
17-Feb-1996 |
ache |
-u unit-command example
|
14102 |
15-Feb-1996 |
adam |
improve the comment for BOOTWAIT
|
13925 |
05-Feb-1996 |
ache |
Be more specific about Europe servers
|
13920 |
05-Feb-1996 |
mpp |
Added a little more verbage to the top of this document and added sup2.au.freebsd.org.
|
13910 |
04-Feb-1996 |
ache |
Alternative SUP servers list (correct me, if I forgot smth)
|
13537 |
21-Jan-1996 |
bde |
Use `make' loops instead of shell loops to install things. This fixes the verbose output for `make -s install' and gives nicer output for `make install' and `make -n install'. This method should be used more.
Install meteor and startslip. In fact, install all subdirectories except CVS. This method should be used more so that SUBDIR lists don't have to be changed so often (special cases could be handled by short exclusion lists).
|
13261 |
05-Jan-1996 |
ache |
Remove -fno-strength-reduce, gcc bug fixed recently
|
13122 |
30-Dec-1995 |
peter |
recording cvs-1.6 file death
|
13011 |
25-Dec-1995 |
bde |
Updated lkm examples to work with prototype-related changes to the MOD_MISC() and DISPATCH() macros.
Renamed new_syscall module as new_syscall_mod. It seems to be standard to have module names ending with _mod, and this may be forced when MOD_SYSCALL() and MOD_VFS() are updated to match MOD_MISC().
Cleaned up lkm examples a little.
|
12944 |
21-Dec-1995 |
ache |
Back out my prev commit, I didn't fully update some things on my machine :-(
|
12943 |
21-Dec-1995 |
ache |
Fix collection names to reflect reality
|
12765 |
11-Dec-1995 |
peter |
Dive in the deep end and change the examples installation method.. :-/ the 'rm -rf' and cpio was bugging me because rdist used to get false hits and also it installs the files with the wrong uid. I've tried this by running a find .. -exec ${INSTALL} ...; instead...
|
12735 |
10-Dec-1995 |
gibbs |
Fix spelling errors.
Submitted by: Faried Nawaz <fn@pain.csrv.uidaho.edu>
|
12716 |
10-Dec-1995 |
markm |
Modify the supfile collection target names in accordance with Freefall's convention. My international site has been fixed!
|
12715 |
10-Dec-1995 |
asami |
Add ports-www.
|
12714 |
10-Dec-1995 |
gibbs |
Official CVS supfile in preparation for opening of our tree.
|
12711 |
10-Dec-1995 |
gibbs |
Seeing as I was elected without nomination to being SUP meister, update these files a bit. The entries for the International secure collections don't match Freefall's naming conventions, but hopefully MarkM will fix that soon. Each file now has an extensive header describing what it is, how to use it, and how you may want to customize it for a particular system.
|
12686 |
09-Dec-1995 |
ache |
Yet one conf example
|
12615 |
04-Dec-1995 |
nate |
Added support for the slip.hosts options 'normal', 'compress', 'noicmp', and 'autocmp'.
Obtained from: (mostly) slattach and (slightly) 1.X
|
12547 |
30-Nov-1995 |
ache |
Remove ports-utils
|
12544 |
30-Nov-1995 |
asami |
Add ports-misc and ports-www.
|
11095 |
30-Sep-1995 |
ache |
Refle
|
11094 |
30-Sep-1995 |
jfieber |
Add sup.
|
11091 |
30-Sep-1995 |
jfieber |
Move supfile examples from share/FAQ/extras to share/examples/sup
|
11047 |
28-Sep-1995 |
ache |
Change SUPFILEx order, secure first, ports second to make base system update first All stuff commented out
|
10967 |
22-Sep-1995 |
peter |
Fix typo. The skeleton still had one reference to "THE REGENTS" instead of "[your name]"
|
10804 |
15-Sep-1995 |
ache |
Update to reflect new options
|
10796 |
15-Sep-1995 |
ache |
Reflect new LINE env variable addition
|
10759 |
15-Sep-1995 |
ache |
Add -fno-strength-reduce to -O2 optimization, all stuff commented out
|
10758 |
15-Sep-1995 |
ache |
Add commented out entries for SUP update, 3 standard supfiles handled: standard/ports/secure
|
10752 |
14-Sep-1995 |
ache |
Add startslip example
|
10390 |
28-Aug-1995 |
jkh |
Bring in example files for Mark Tinguely and Jim Lowe's Matrox Meteor driver. Submitted by: Mark Tinguely <tinguely@plains.nodak.edu> and Jim Lowe <james>
|
10058 |
14-Aug-1995 |
wollman |
Added a copy of my little program to find the IP address of the outgoing interface for a particular remote host.
Requested by: Joerg Wunsch <j@uriah.heep.sax.de>
|
10037 |
12-Aug-1995 |
joerg |
Make this example actually compile again. Rename the module so that it will get a unique .o file name, and convert the module's Makefile to use <bsd.mod.mk>.
|
10036 |
12-Aug-1995 |
joerg |
Do not omit the Makefiles when installing the examples; they are part of them. Also correct the omission of CVS files by abusing the find syntax instead of grepping.
Closes PR #bin/636.
|
9732 |
27-Jul-1995 |
joerg |
Make this bugger actually compile and work again:
o a couple of header files have been missing
o convert the LKM Makefile to use <bsd.kmod.mk>
o rename the module to ``misc_mod'' (as opposed to ``miscmod''), so the module name can be made identical to the module's file name, avoiding the clash with one of the component's .o file names
o modstat(1/8) has been moved meanwhile
|
9509 |
13-Jul-1995 |
rgrimes |
[I cvs admin -o the last one of these you saw, it was commited on the wrong branch :-(]
Eliminate incorrect double negative logic Bruce has been gripping about for a year now. Change = no_way to = true.
Submitted by: bde (sort of, patch by me :-))
|
9506 |
13-Jul-1995 |
rgrimes |
Remove CCFPU, it is no longer used any place in the source tree. Submitted by: Thomas Graichen <graichen@sirius.physik.fu-berlin.de>
|
8875 |
30-May-1995 |
rgrimes |
Remove trailing whitespace.
|
8024 |
23-Apr-1995 |
jkh |
Document COPTFLAGS in addition to CFLAGS.
|
7478 |
30-Mar-1995 |
ache |
Remove syscons example
|
7210 |
21-Mar-1995 |
phk |
make.conf doesn't postulate anything about libm now.
|
7198 |
20-Mar-1995 |
jkh |
Take out obsolete KERBEROS_IV build variable. Just eBones now. Submitted by: Mark Murray <mark@grondar.za>
|
6877 |
04-Mar-1995 |
dima |
"vidcontrol -s" -> "modload"
|
6870 |
03-Mar-1995 |
ache |
Remap Grey Delete to ESC[~
|
6833 |
02-Mar-1995 |
jkh |
Add this file here so I finally have something to point people at as a prototype. Obtained from: U.C. Regents standard copyright.
|
5929 |
26-Jan-1995 |
ache |
Remove Delete remapping, unneccesary now
|
5522 |
11-Jan-1995 |
wollman |
Delete VFS example since it doesn't apply and there are ten perfectly good examples elsewhere in the tree. (The MISC example should probably go, too, but it should still compile so I'm leaving it for now.)
|
5310 |
31-Dec-1994 |
ache |
Remove direct keypad 5 to \E[E remapping, unnecessary now
|
4330 |
10-Nov-1994 |
phk |
Now that the default for the shared gcc-internal lib changed, make this match.
|
4292 |
08-Nov-1994 |
phk |
Don't install Makefile
|
4257 |
08-Nov-1994 |
phk |
Make installs better, install the FAQ stuff, don't install CVS-dirs.
|
4224 |
07-Nov-1994 |
phk |
Update make.conf and sys.mk to reflect the most recent advances in civilization: Use -O2 and MSUN as default, and X11 is in /usr/X11R6
|
3830 |
24-Oct-1994 |
sos |
added ibcs2 directory.
|
3812 |
23-Oct-1994 |
sos |
A little COFF program (uuencoded) + README. Just do we can show that iBCS2 support is working (that was a cheap one :-)
|
3699 |
18-Oct-1994 |
guido |
Put skey.acccess in usr/share/examples/etc
|
3241 |
30-Sep-1994 |
csgr |
mention MAKE_EBONES and MAKE_KERBEROS
|
3076 |
25-Sep-1994 |
ache |
Add syscons to DIRS list, pointed by wollman
|
3074 |
25-Sep-1994 |
ache |
Update with new names
|
3026 |
23-Sep-1994 |
rgrimes |
Fixed typo that caused make install to fall if SHARED=copies.
|
3025 |
23-Sep-1994 |
rgrimes |
Revert to installing /etc/files from src/etc.
|
3023 |
23-Sep-1994 |
rgrimes |
fbtab: Pulled down from Attic, fixed spaces to tabs.
make.conf: Pulled in the following changes that had been commited to share/examples/etc: ---------------------------- revision 1.6 date: 1994/09/20 22:30:33; author: adam; state: Exp; lines: +3 -3 BOOTWAIT example converted to milliseconds calibration ---------------------------- revision 1.4 date: 1994/09/19 21:35:28; author: wollman; state: Exp; lines: +7 -1 Document NO_SHARED_LIBCC_INT. ---------------------------- revision 1.3 date: 1994/09/19 21:28:11; author: wollman; state: Exp; lines: +12 -17 Install /etc from the same source as /usr/share/examples/etc (mostly). ---------------------------- revision 1.2 date: 1994/09/19 02:05:08; author: ache; state: Exp; lines: +1 -11 Remove STARTUP_LOCALE, obsoleted now ---------------------------- revision 1.1 date: 1994/09/08 19:08:59; author: jkh; state: Exp; Add a sample make.conf. Also document the new X11BASE variable, and expand some of the documentation for other entries. Submitted by: jkh ----------------------------
manpath.config: Pulled down from Attic, and merged share/examples/etc changes.
rc: Pulled in the following change from share/examples/etc: ---------------------------- revision 1.2 date: 1994/09/19 23:13:37; author: ache; state: Exp; lines: +1 -2 Remove warning about adjkerntz /var/run file ----------------------------
|
2911 |
19-Sep-1994 |
ache |
Remove warning about adjkerntz /var/run file
|
2905 |
19-Sep-1994 |
wollman |
Install /etc from the same source as /usr/share/examples/etc (mostly).
|
2902 |
19-Sep-1994 |
adam |
More reasonable example of BOOTWAIT parameter Added comment about multiplication factor
|
2880 |
19-Sep-1994 |
ache |
Remove STARTUP_LOCALE reference, obsoleted
|
2699 |
13-Sep-1994 |
wollman |
Don't be so aggressive when installing examples. We still delete the directories or links before we install the new things, but now we don't delete /usr/share/examples itself, so other examples installed from other places in the tree will not be touched.
|
2694 |
12-Sep-1994 |
ache |
Added example of vidcontrol/kbdcontrol usage (russian screen/keyboard setup)
|
2595 |
08-Sep-1994 |
jkh |
Sample manpath.config. Submitted by: jkh
|
2365 |
28-Aug-1994 |
bde |
Define NOOBJ so that install doesn't try to get the sources from the wrong place.
Use ${ECHO} instead of `echo' so that `make -s' is fairly quiet.
|
2249 |
23-Aug-1994 |
guido |
Move fbtab file to share/examples/etc per Garrett's request. Reviewed by: Submitted by:
|
2136 |
19-Aug-1994 |
wollman |
Actually install LKM examples.
|
2128 |
19-Aug-1994 |
dg |
Terry Lambert's loadable kernel module support - example modules.
|
2006 |
10-Aug-1994 |
wollman |
Added example of how to tell various FreeBSD versions apart.
|
1987 |
09-Aug-1994 |
wollman |
Make examples install into /usr/share/examples. Like with includes, you have a choice between SHARED=copies and SHARED=symlinks. The default is to copy.
I have also added a /usr/share/examples/etc directory, where I hope to have all sample configuration files which in real use go into /etc installed. (This way, if the user really screws the real one up, they can always go back to a known-working distribution copy, even if they don't have sources.)
|
1906 |
07-Aug-1994 |
wollman |
This commit was generated by cvs2svn to compensate for changes in r1905, which included commits to RCS files with non-trunk default branches.
|
1749 |
16-Jun-1994 |
ache |
Add commented out STARTUP_LOCALE with explanation
|
1740 |
15-Jun-1994 |
adam |
Changed MDEC_OPT=BOOTWAIT= to BOOTWAIT=
|
1733 |
15-Jun-1994 |
adam |
added comments for how to use CCFPU and MDEC_OPT
|
1719 |
14-Jun-1994 |
ache |
Remove CXXFLAGS from here, handled in another place
|
1697 |
09-Jun-1994 |
ache |
Add commented out PRINTER=ps entry for easy choose system documentation format
|
1696 |
09-Jun-1994 |
ache |
Add commented out CXXFLAGS entry similar to CFLAGS entry
|
1684 |
05-Jun-1994 |
csgr |
Add mention of WANT_MSUN, HAVE_FPU and NOMANCOMPRESS (NOMANCOMPRESS works together with the new bsd.man.mk to turn off compression of manual pages - manual pages are installed compressed by default now.)
|
1664 |
01-Jun-1994 |
phk |
added make.conf template, which does nothing.
|
1554 |
26-May-1994 |
rgrimes |
This commit was generated by cvs2svn to compensate for changes in r1553, which included commits to RCS files with non-trunk default branches.
|