- Copy stable/10 (r259064) to releng/10.0 as part of the
10.0-RELEASE cycle.
- Update __FreeBSD_version [1]
- Set branch name to -RC1

[1] 10.0-CURRENT __FreeBSD_version value ended at '55', so
start releng/10.0 at '100' so the branch is started with
a value ending in zero.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Remove unneeded mappings from libmap32.conf. Move it up one level and
install it on powerpc64 in addition to amd64.

Reviewed by: kib
Approved by: re (blanket)

Add a stock libmap32.conf for amd64. The first two lines have no effect
except to document the hardcoded standard library search path for 32-bit
binaries. The third line performs the equivalent substitution for the
private library directory.

Ironically, these entries rely on functionality which is only available
in the COMPAT_32BIT version of rtld-elf.

Approved by: re (blanket)

Remove the reference to pseudo-terminals from the description.

Pseudo-terminals are no longer listed in this file, since the utmpx
implementation doesn't depend on ttyslot().

Remove pseudo-terminals from ttys(5).

When we had utmp(5), we had to list all the psuedo-terminals in ttys(5)
to make ttyslot(3) function properly. Now that pututxline(3) deals with
slot allocation internally (not based on TTY names), we don't need to
list all the TTYs on the system in ttys(5) to make user accounting work
properly.

This patch removes all the entries from the /etc/ttys files, but also
the pts(4) entries that were appended implicitly, which was added in
r154838.

Switch the default terminal emulation style to xterm for most platforms.

Right now syscons(4) uses a cons25-style terminal emulator. The
disadvantages of that are:

- Little compatibility with embedded devices with serial interfaces.
- Bad bandwidth efficiency, mainly because of the lack of scrolling
regions.
- A very hard transition path to support for modern character sets like
UTF-8.

Our terminal emulation library, libteken, has been supporting
xterm-style terminal emulation for months, so flip the switch and make
everyone use an xterm-style console driver.

I still have to enable this on i386. Right now pc98 and i386 share the
same /etc/ttys file. I'm not going to switch pc98, because it uses its
own Kanji-capable cons25 emulator.

IMPORTANT: What to do if things go wrong (i.e. graphical artifacts):

- Run the application inside script(1), try to reduce the problem and
send me the log file.
- In the mean time, you can run `vidcontrol -T cons25' and `export
TERM=cons25' so you can run applications the same way you did before.
You can also build your kernel with `options TEKEN_CONS25' to make all
virtual terminals use the cons25 emulator by default.

Discussed on: current@

Remove the note about using vt220, which makes no sense at all.

vt220 will not work better. Even though it probably will remove warnings
about unknown terminal types, a cons25 emulator is not compatible with
vt220 at all.

Remove pts(4) entries from /etc/ttys.

Even though I increased the amount of pts(4) entries in /etc/ttys some
time ago, I didn't realize back then those entries shouldn't have been
there in the first place.

I just looked at the getttyent() source code and it turns out when you
call setttyent(), it walks through /dev/pts and looks for the device
with the highest number. After you receive EOF's from getttyent(), it
makes up entries for pts(4) devices.

This means that adding entries for pts(4) is somewhat harmful, because
if you now traverse the list, you get redundant entries, so just remove
them.

Restore 256 pty(4) entries.

As discussed with Robert Watson on the src-committers list, it is safer
to keep at least some pty(4) entries in /etc/ttys, for applications that
roll their own PTY allocation routine and only search for BSD-style
PTY's.

This means we've now just toggled the amount of entries for pts(4) and
pty(4).

Requested by: rwatson

Remove old BSD-style entries from /etc/ttys and increase pts(4) to 512.

Because we now use pts(4)-style PTY's exclusively, there is no use for
these entries in /etc/ttys. Right now the pts(4) entries only go from 0
to 255. Because we're going to touch these files anyway, increase the
number to 511.

Discussed with: philip (ex-mentor)

Make uart(4) the default serial port driver on i386 and amd64.

The uart(4) driver has the advantage of supporting a wider variety of
hardware on a greater amount of platforms. This driver has already been
the standard on platforms such as ia64, powerpc and sparc64.

I've decided not to change anything on pc98. I'd rather let people from
the pc98 team look at this.

Approved by: philip (mentor), marcel

Bump up the number of ttys supported by pty(4) to 512 by making use of
[pt]ty[lmnoLMNO][0-9a-v].

MFC after: 3 days
Reviewed by: rwatson

Add ttys lines for pts/0-pts/255.

MFC after: 3 days

Remove more vestiges of /usr/X11R6, but leave mtree for portmgr.

Add dumb console driver and related bits.

dcons(4): very simple console and gdb port driver
dcons_crom(4): FireWire attachment
dconschat(8): User interface to dcons

Tested with: i386, i386-PAE, and sparc64.

Per previous announcement, remove the old version of the rc system.

All functionality from the previous system has been preserved, and
users should still customize their system boot with the familiar
methods, rc.conf, rc.conf.local, rc.firewall, sysctl.conf, etc.

Users who have customized versions of scripts that have been removed
should take great care when upgrading, since the compatibility code
that used those old scripts has also been removed.

xten isn't needed after tw is gone.

Approved by: re@ (scottl)

Mention that terminal type vt220 will work better if one needs
interoperability with other systems like Solaris or GNU/Linux.

PR: 33810
Approved by: obrien

Move the syscons configuration to a machine independent rc.syscons. The
syscons sh code was identical on both platforms except for whitespace
differences.

Don't announce that rc.${MACHINE_ARCH} is doing the syscons configuration
as the previous line already tells us we are in rc.${MACHINE_ARCH}. This
also allows more syscons configuration messages during startup to fit on
one line.

Reviewed by: dougb

Apply a more consistent style to the echo statements in /etc/ scripts.
* Put quotes around each line
* Single quotes for lines with no variable interpolation
* Double quotes if there is
* Capitalize each word that begins a line
* Make echo -n 'Doing foo:' ... echo '.' more of a standard

No functionality changes

Fix bug in rev 1.54; the terminating `;;' for the ibcs2_enable=YES
case got lost.

Don't rely on a shell scripts to do the simple job of loading
kernel modules for ibcs2_enable and svr4_enable.

Don't rely on a shell script to do the neglibly less simple
job of loading a kernel module and running one command for
linux_enable.

These shell scripts are going away.

Move the running of the Linux and SVR4 compat bits to the arch independent
location.

Sponsored by: LinuxWorld frustration

Clean up all the old setup code for the old /dev/random. This will be
revisited when the new /dev/random is done.

Revert to rev 1.6 until post 4.0-R. As probably 98% of i386 installs
happen with a keyboard and monitor the console change was not as needed
in the i386 case as the Alpha case. IMO >50% of Alpha installs are using
a serial console, the change matching rev 1.7 should not be backed out.

* Use `console' rather than `ttyv0' so there will always be a getty on
the console reguardless of the type of console.
* Make the Alpha version match the i386 version.

Bah! Give me the pointy hat. Never commit fixes when just awake.
anable -> enable

Spotted by: Alexander Leidinger <Alexander@leidinger.net>

Fix my obmission of the keyword enable after apm -e.

Submitted by: Blaz Zupan <blaz@amis.net>

Use apm instead of apmconf.
Necessary change to due removal of apmconf which got moved into apm
by green.

Use more thorough redirection to make the impact of allscreens_flags
more comprehensive. Previously, at least colour changes were not
applied to all virtual consoles.

PR: 15066
Reported by: Andy Farkas <andyf@speednet.com.au>
Submitted by: yokota

Be slightly less verbose.

/Linux emulation/Linux mode binary compatibility/

Apply a consistent style to most of the etc scripts. Particularly, use
case instead of test where appropriate, since case allows case is a sh
builtin and (as a side-effect) allows case-insensitivity.

Changes discussed on freebsd-hackers.

Submitted by: Doug Barton <Doug@gorean.org>

$Id$ -> $FreeBSD$

Style clean-up:

* All variables are now embraced: ${foo}

* All comparisons against some value now take the form:
[ "${foo}" ? "value" ]
where ? is a comparison operator

* All empty string tests now take the form:
[ -z "${foo}" ]

* All non-empty string tests now take the form:
[ -n "${foo}" ]

Submitted by: jkh

Grammar and formatting touch-ups to comments.

Refine on explanation for apm stuff.
Make it clear that apmd depends on apmconf -e.

Reviewed by: obrien, my friend :-)

Add apmd_enable and apmd_flags for the boot-time optinos.

Pointed out by: obrien
Forgotten by: iwasaki

Put apmd configuration and rc files in /etc.
Update some files for apmd.

Feed the vty monster.

Reviewed by: jkh
Submitted by: wes
Added commentary to ttys to clarify the meaning of the columns.
Added commentary to ttys to clarify the meaning of the columns.

Added a knob for svr4 to rc.conf (and associated support in rc.i386)

Suggested by: jkh

Unload the splash decoder module when a screen saver module is loaded.
Strictly speaking, it is not necessary; the screen saver will load
even if the splash module is still in memory. But still, it is the right
thing to do, otherwise the splash decoder module just wasts the kernel space.

Discussed with: des

kldload the screen savers

Write temp files with a uniq name into /var/run
instead the public writable directory /tmp
PR: conf/8330

Add Id keywords

modstat | grep _saver is used to determine if a screensaver is loaded
already. The modstat output goes to the screen.
PR: 7351
Reviewed by: phk
Submitted by: Jos Backus <Jos.backus@nl.origin-it.com>

Moved from directory above. It is i386 specific.

Cosmetique changes in vidcontrol all screens knob

Implement vidcontrol knob which allows to set passed flags/modes
for all virtual screens (via for loop)

New moused flag.
Submitted by: Kazutaka YOKOTA <yokota@zodiac.mech.utsunomiya-u.ac.jp>

DTRT with ${viddev} in the same way as the other vidcontrol entries.
Reminded by: bde

MF22: If moused started, also enable it for console vty.
PR: 4525

fix rndcontrol invocation.. rndcontrol has the irq after a -s switch, not
just the next argument. We really need to be able to tag drivers with
their randomness "suitability" so that this can be more automatic. It
would be nice if all suitable drivers registered their irq automatically,
but still allowed them to be turned on/off etc.

Correct the way IRQs are passed to rndcontrol. If there are more than
one IRQ being used, the -s options must be specified for each of them.
In this case rc.conf would only allow 1, as the -s was coded into
rc.i386.

YAMF22

Neaten up some things which were inconsistent, add a few more flags
to things which need them, general cleanup.
Submitted by: Brian Somers <brian@awfulhak.org>

Update the etc world from RELENG_2_2 which is now more up-to-date
(gotta get myself -current again, this is a drag).

Also-fixes-problems-noted-by: Wolfgang Helbig & Joerg Wunsch

YAMF22

YAMF22

Bring in rc file changes from -current.

Revert $FreeBSD$ to $Id$

As /etc/sysconfig and /etc/rc.i386 is now, you can't modify the syscons
bell type on boot. Slightly annoying when your system doesn't have a speaker.
This adds a `keybell' frob for setting it. Closes PR#2519

Submitted-By: Jonathan Mini <mini@hydrogen.nike.efn.org>

Make the long-awaited change from $Id$ to $FreeBSD$

This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore. This update would have been
insane otherwise.

Remove sleep before moused, problem fixed with new consolectl device

Make moused actually work:
add sleep 20 before moused starts.
It allows all getties to activate screens.

Add moused hooks (OFF by default)

Another round of spelling fixes.

Uniformize startup display to follow style of all the others. This means
in particular getting rid of most of the goop that causes syscons options
to be spread out over four separate lines.

Fix stupid typo.
Pointed out by: Mark Valentine

OOps, nearly missed this bit. Add the call to rndcontrol to set the
chosen interrupts for the entropy gathering in /dev/random.

Part 2 of the linux LKM hook, and use the new screen saver entry
points in the modload, as enforced by the recent symorder and
bsd.kmod.mk changes..

FreeBSD/386 -> FreeBSD/i386

Submitted by: Thomas Graichen <graichen@sirius.physik.fu-berlin.de>

Reviewed by: sos
Submitted by: bde

rc.i386 failed messily when I used a serial console.

Editors note:
Use file redirection so that all the kbdcontrol and vidcontrol
commands act upon /dev/ttyv0 instead of stdin. Though this feature
is not documented it is the intended behavior of {vid,kbd}control
and shall be documented in the future as such.

A better solution for the noisy ibcs2 startup, just echo a space and then
call ibcs2.
Submitted by: jkh, slight modification by me.

Add missing "echo '.'" to end of file so that the next file called
starts on a new line.

This is a purely cosmetic clean up. Fix many cut and paste problems that
had turned tabs into spaces.

Don't spit out a gratuitous ibcs2 startup message.

Set desired cursor type for syscons

Add missing ';'

Restore my function key configuration stuff which Rod promise to
restore but really didn't do it.
Restore message from old rc about configuring syscons whith
echo added before it to go to new line after "echo -n xtend" f.e.
and similar stuff.

This is the rc work as provided by pts, I will me makeing some additional
changes to it based upon other outstanding bug reports and commits made
after his work.

Comments:

(a) sysconfig is still used to do all configuration. I was not going to
change that out from under you.... a user never need edit netstart
or rc* unless they're being very weird.

(b) rc.maint has been folded back into rc. It is just unworkable as
a separate chunk because of ordering bogosities

(c) netstart does what it says... it starts up enough of the network to
get up, it doesn't start every bloody daemon that might talk to a
socket... netstart ifconfig's the devices and sets up routing if
configured to do so.

(d) nfs disks are mounted immediately after netstart completes

(e) syslog is started as early as possible (right after nfs) so that error
messages can get logged to remote syslog servers properly

(f) named is started (there is an argument that says that named should be
started before syslogd because if you are the dns server for your domain,
you'd like named to resolve remote hosts in syslog.conf, but this is
a minority case and the trivial workarround is to put the syslog host
in /etc/hosts or use an /etc/resolv.conf -- why? because you want syslog
to catch named errors, which is a MUCH more important and likely occurance)

(g) NOW all of the rest of the network daemons such as the time stuff, RPC,
NIS, NFS, Kerberos and inetd are started

(h) the rest of the generic stuff is done (cron/printer/sendmail)

(i) shared libraries are set

(j) /etc/rc.i386 is run (this does FreeBSD/386 specific stuff like ibcs2,
xtend, and all of the syscons stuff
(this is actually started as /etc/rc.`uname -m`

(k) the syscons stuff has gotten a serious cleaning to make it consistent
with rc conventions

(l) rc.local has had the comments about syscons removed (they are not relevant
to this file now) and the full name of the kernel has been restored to
/etc/motd

Submitted by: pts