Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Give (*ext_free) an int return value allowing for very sophisticated
external mbuf buffer management capabilities in the future.

For now only EXT_FREE_OK is defined with current legacy behavior.

Sponsored by: The FreeBSD Foundation

Add an mbuf pointer parameter to (*ext_free) to give the external
free function access to the mbuf the external memory was attached
to.

Mechanically adjust all users to include the mbuf parameter.

This fixes a long standing annoyance for external free functions.
Before one had to sacrifice one of the argument pointers for this.

Sponsored by: The FreeBSD Foundation

Mechanically substitute flags from historic mbuf allocator with
malloc(9) flags in sys/dev.

Remove duplicate const specifiers in many drivers (I hope I got all of
them, please let me know if not). Most of these are of the form:

static const struct bzzt_type {
[...list of members...]
} const bzzt_devs[] = {
[...list of initializers...]
};

The second const is unnecessary, as arrays cannot be modified anyway,
and if the elements are const, the whole thing is const automatically
(e.g. it is placed in .rodata).

I have verified this does not change the binary output of a full kernel
build (except for build timestamps embedded in the object files).

Reviewed by: yongari, marius
MFC after: 1 week

ether_ifattach() sets if_mtu to ETHERMTU, don't bother set it again

Reviewed by: yongari

- There's no need to overwrite the default device method with the default
one. Interestingly, these are actually the default for quite some time
(bus_generic_driver_added(9) since r52045 and bus_generic_print_child(9)
since r52045) but even recently added device drivers do this unnecessarily.
Discussed with: jhb, marcel
- While at it, use DEVMETHOD_END.
Discussed with: jhb
- Also while at it, use __FBSDID.

Close a race where SIOCGIFMEDIA ioctl get inconsistent link status.
Because driver is accessing a common MII structure in
mii_pollstat(), updating user supplied structure should be done
before dropping a driver lock.

Reported by: Karim (fodillemlinkarimi <> gmail dot com)

- Remove unused remnants of MII bitbang'ing.
- Sprinkle const.

- Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP
(reporting IFM_LOOP based on BMCR_LOOP is left in place though as
it might provide useful for debugging). For most mii(4) drivers it
was unclear whether the PHYs driven by them actually support
loopback or not. Moreover, typically loopback mode also needs to
be activated on the MAC, which none of the Ethernet drivers using
mii(4) implements. Given that loopback media has no real use (and
obviously hardly had a chance to actually work) besides for driver
development (which just loopback mode should be sufficient for
though, i.e one doesn't necessary need support for loopback media)
support for it is just dropped as both NetBSD and OpenBSD already
did quite some time ago.
- Let mii_phy_add_media() also announce the support of IFM_NONE.
- Restructure the PHY entry points to use a structure of entry points
instead of discrete function pointers, and extend this to include
a "reset" entry point. Make sure any PHY-specific reset routine is
always used, and provide one for lxtphy(4) which disables MII
interrupts (as is done for a few other PHYs we have drivers for).
This includes changing NIC drivers which previously just called the
generic mii_phy_reset() to now actually call the PHY-specific reset
routine, which might be crucial in some cases. While at it, the
redundant checks in these NIC drivers for mii->mii_instance not being
zero before calling the reset routines were removed because as soon
as one PHY driver attaches mii->mii_instance is incremented and we
hardly can end up in their media change callbacks etc if no PHY driver
has attached as mii_attach() would have failed in that case and not
attach a miibus(4) instance.
Consequently, NIC drivers now no longer should call mii_phy_reset()
directly, so it was removed from EXPORT_SYMS.
- Add a mii_phy_dev_attach() as a companion helper to mii_phy_dev_probe().
The purpose of that function is to perform the common steps to attach
a PHY driver instance and to hook it up to the miibus(4) instance and to
optionally also handle the probing, addition and initialization of the
supported media. So all a PHY driver without any special requirements
has to do in its bus attach method is to call mii_phy_dev_attach()
along with PHY-specific MIIF_* flags, a pointer to its PHY functions
and the add_media set to one. All PHY drivers were updated to take
advantage of mii_phy_dev_attach() as appropriate. Along with these
changes the capability mask was added to the mii_softc structure so
PHY drivers taking advantage of mii_phy_dev_attach() but still
handling media on their own do not need to fiddle with the MII attach
arguments anyway.
- Keep track of the PHY offset in the mii_softc structure. This is done
for compatibility with NetBSD/OpenBSD.
- Keep track of the PHY's OUI, model and revision in the mii_softc
structure. Several PHY drivers require this information also after
attaching and previously had to wrap their own softc around mii_softc.
NetBSD/OpenBSD also keep track of the model and revision on their
mii_softc structure. All PHY drivers were updated to take advantage
as appropriate.
- Convert the mebers of the MII data structure to unsigned where
appropriate. This is partly inspired by NetBSD/OpenBSD.
- According to IEEE 802.3-2002 the bits actually have to be reversed
when mapping an OUI to the MII ID registers. All PHY drivers and
miidevs where changed as necessary. Actually this now again allows to
largely share miidevs with NetBSD, which fixed this problem already
9 years ago. Consequently miidevs was synced as far as possible.
- Add MIIF_NOMANPAUSE and mii_phy_flowstatus() calls to drivers that
weren't explicitly converted to support flow control before. It's
unclear whether flow control actually works with these but typically
it should and their net behavior should be more correct with these
changes in place than without if the MAC driver sets MIIF_DOPAUSE.

Obtained from: NetBSD (partially)
Reviewed by: yongari (earlier version), silence on arch@ and net@

Converted the remainder of the NIC drivers to use the mii_attach()
introduced in r213878 instead of mii_phy_probe(). Unlike r213893 these
are only straight forward conversions though.

Reviewed by: yongari

- Hook into the existing stat timer to drive the transmit watchdog instead
of using if_watchdog and if_timer.
- Reorder detach to call ether_ifdetach() before anything else in tl(4)
and wb(4).

Use if_maddr_rlock()/if_maddr_runlock() rather than IF_ADDR_LOCK()/
IF_ADDR_UNLOCK() across network device drivers when accessing the
per-interface multicast address list, if_multiaddrs. This will
allow us to change the locking strategy without affecting our driver
programming interface or binary interface.

For two wireless drivers, remove unnecessary locking, since they
don't actually access the multicast address list.

Approved by: re (kib)
MFC after: 6 weeks

Remove unused variable.

Found with: Coverity Prevent(tm)
CID: 549

Plug memory leak in jumbo buffer allocation failure path.
Patch in the PR was modified to check active jumbo buffers in use
and other possible jumbo buffer leak.

Jumbo buffer usage in lge(4) still wouldn't be reliable due to lack
of driver lock in local jumbo buffer allocator. Either introduce
a new lock to protect jumbo buffer or switch to UMA backed page
allocator for jumbo frame is required.

PR: kern/78072

Give MEXTADD() another argument to make both void pointers to the
free function controlable, instead of passing the KVA of the buffer
storage as the first argument.

Fix all conventional users of the API to pass the KVA of the buffer
as the first argument, to make this a no-op commit.

Likely break the only non-convetional user of the API, after informing
the relevant committer.

Update the mbuf(9) manual page, which was already out of sync on
this point.

Bump __FreeBSD_version to 800016 as there is no way to tell how
many arguments a CPP macro needs any other way.

This paves the way for giving sendfile(9) a way to wait for the
passed storage to have been accessed before returning.

This does not affect the memory layout or size of mbufs.

Parental oversight by: sam and rwatson.

No MFC is anticipated.

Fix function prototype for device_shutdown method.

o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Reviewed by: many
Approved by: re@

- Consistently use if_printf() only in interface methods: if_start(),
if_watchdog, etc., or in functions used only in these methods.
In all other functions in the driver use device_printf().
- Use __func__ instead of typing function name.

Submitted by: Alex Lyashkov <umka sevcity.net>

Since DELAY() was moved, most <machine/clock.h> #includes have been
unnecessary.

Remove various bits of conditional Alpha code and fixup a few comments.

Do not touch ifp->if_baudrate in miibus aware drivers.

Add locking and mark MPSAFE:
- Add locked variants of start, init, and ifmedia_upd.
- Add a mutex to the softc and remove spl calls.
- Use callout(9) rather than timeout(9).
- Setup interrupt handler last in attach.
- Use M_ZERO rather than bzero.

MFC after: 1 week
Tested by: wpaul

- Store pointer to the link-level address right in "struct ifnet"
rather than in ifindex_table[]; all (except one) accesses are
through ifp anyway. IF_LLADDR() works faster, and all (except
one) ifaddr_byindex() users were converted to use ifp->if_addr.

- Stop storing a (pointer to) Ethernet address in "struct arpcom",
and drop the IFP2ENADDR() macro; all users have been converted
to use IF_LLADDR() instead.

Replace FreeBSD 3.x syntax (controller miibus0) with 4.x syntax
(device miibus) in time for 7.0 :-)

- Use if_printf() and device_printf() and axe lge_unit from the softc.
- Don't bzero the softc first thing in attach.
- Cleanup error handling in attach() to avoid lots of duplication.
- Don't initialize the callout handle twice.

MFC after: 3 days

Make sure that we call if_free(ifp) after bus_teardown_intr. Since we
could get an interrupt after we free the ifp, and the interrupt
handler depended on the ifp being still alive, this could, in theory,
cause a crash. Eliminate this possibility by moving the if_free to
after the bus_teardown_intr() call.

Propagate rename of IFF_OACTIVE and IFF_RUNNING to IFF_DRV_OACTIVE and
IFF_DRV_RUNNING, as well as the move from ifnet.if_flags to
ifnet.if_drv_flags. Device drivers are now responsible for
synchronizing access to these flags, as they are in if_drv_flags. This
helps prevent races between the network stack and device driver in
maintaining the interface flags field.

Many __FreeBSD__ and __FreeBSD_version checks maintained and continued;
some less so.

Reviewed by: pjd, bz
MFC after: 7 days

Modify device drivers supporting multicast addresses to lock if_addr_mtx
over iteration of their multicast address lists when synchronizing the
hardware address filter with the network stack-maintained list.

Problem reported by: Ed Maste (emaste at phaedrus dot sandvine dot ca>
MFC after: 1 week

Stop embedding struct ifnet at the top of driver softcs. Instead the
struct ifnet or the layer 2 common structure it was embedded in have
been replaced with a struct ifnet pointer to be filled by a call to the
new function, if_alloc(). The layer 2 common structure is also allocated
via if_alloc() based on the interface type. It is hung off the new
struct ifnet member, if_l2com.

This change removes the size of these structures from the kernel ABI and
will allow us to better manage them as interfaces come and go.

Other changes of note:
- Struct arpcom is no longer referenced in normal interface code.
Instead the Ethernet address is accessed via the IFP2ENADDR() macro.
To enforce this ac_enaddr has been renamed to _ac_enaddr.
- The second argument to ether_ifattach is now always the mac address
from driver private storage rather than sometimes being ac_enaddr.

Reviewed by: sobomax, sam

Remove bus_{mem,p}io.h and related code for a micro-optimization on i386
and amd64. The optimization is a trivial on recent machines.

Reviewed by: -arch (imp, marcel, dfr)

Use BUS_PROBE_DEFAULT for pci probe return value

Start each of the license/copyright comments with /*-, minor shuffle of lines

Hide link up/down/media printfs behind bootverbose

Since if_lge doesn't contain locking or run with INTR_MPSAFE, mark
the interface as IFF_NEEDSGIANT so if_start is run holding Giant.

Remove the setting of the pci config variables on power state changes.
The bus does this now.

Replace handrolled CRC calculation with ether_crc32_[lb]e().

Add missing <sys/module.h> includes

We don't need to initialize if_output, ether_ifattach() does it
for us.

Convert callers to the new bus_alloc_resource_any(9) API.

Submitted by: Mark Santcroos <marks@ripe.net>
Reviewed by: imp, dfr, bde

Announce ethernet MAC addresss in ether_ifattach().

Don't use caddr_t in mchash(). Also use C99 spellings over BSD ones.

Requested by: bde,imp

Remove duplicate FBSDID's, move others to their right place.

Try to create some sort of consistency in how the routings to find the
multicast hash are written. There are still two distinct algorithms used,
and there actually isn't any reason each driver should have its own copy
of this function as they could all share one copy of it (if it grew an
additional argument).

Replace the if_name and if_unit members of struct ifnet with new members
if_xname, if_dname, and if_dunit. if_xname is the name of the interface
and if_dname/unit are the driver name and instance.

This change paves the way for interface renaming and enhanced pseudo
device creation and configuration symantics.

Approved By: re (in principle)
Reviewed By: njl, imp
Tested On: i386, amd64, sparc64
Obtained From: NetBSD (if_xname)

Use __FBSDID().
Also some minor style cleanups.

Prefer new location of pci include files (which have only been in the
tree for two or more years now), except in a few places where there's
code to be compatible with older versions of FreeBSD.

All current uses of pci_set_powerstate are bogus, at least in theory.
However, they are presently necessary due to bigger bogusness in the
pci bus layer not doing the right thing on suspend/resume or on
initial device probe. This is exactly the sort of thing that the
BURN_BRIDGES option was invented for. Mark all of them as
BURN_BRIDGES. As soon as I have the powerstate stuff properly
integrated into the pci bus code, I intend to remove all these
workarounds.

- Don't call pci_enable_io() in drivers (unless needed for resume).
- Don't test memory/port status and emit an error message; the PCI
bus code will do this now.

- Express hard dependencies on bus (pci, isa, pccard) and
network layer (ether).
- Don't abuse module names to facilitate ifconfig module loading;
such abuse isn't really needed. (And if we do need type information
associated with a module then we should make it explicit and not
use hacks.)

Use __FBSDID rather than rcsid[].

Back out M_* changes, per decision of the TRB.

Approved by: trb

Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.

network interface driver changes:

o don't strip the Ethernet header from inbound packets; pass packets
up the stack intact (required significant changes to some drivers)
o reference common definitions in net/ethernet.h (e.g. ETHER_ALIGN)
o track ether_ifattach/ether_ifdetach API changes
o track bpf changes (use BPF_TAP and BPF_MTAP)
o track vlan changes (ifnet capabilities, revised processing scheme, etc.)
o use if_input to pass packets "up"
o call ether_ioctl for default handling of ioctls

Reviewed by: many
Approved by: re

Be consistent about "static" functions: if the function is marked
static in its prototype, mark it static at the definition too.

Inspired by: FlexeLint warning #512

Cleanup after my de-__P (remove leading whitespace before prototype args).
Add newlines after function return types in function declarations.

Approved by: wpaul (a long time ago)

catch up with ext_free prototype change.

Follow NetBSD and s/IFM_1000_TX/IFM_1000_T/

Remove __P.

Do not call mii_polltick() immediately after mii_tick().

Poiinted out by: wpaul

Have the driver announce its rxcsum capabilities.

Apply patch supplied by Jonathan Chen: use the correct arguments to
pci_enable_io(). We need to use SYS_RES_IOPORT/SYS_RES_MEMORY instead
of PCIM_CMD_PORTEN/PCIM_CMD_MEMEN.

Change m_devget()'s outdated and unused `offset' argument to actually mean
something: offset into the first mbuf of the target chain before copying
the source data over.

Make drivers using m_devget() with a first argument "data - ETHER_ALIGN"
to use the offset argument to pass ETHER_ALIGN in. The way it was previously
done is potentially dangerous if the source data was at the top of a page
and the offset caused the previous page to be copied (if the
previous page has not yet been appropriately mapped).

The old `offset' argument in m_devget() is not used anywhere (it's always
0) and dates back to ~1995 (and earlier?) when support for ethernet trailers
existed. With that support gone, it was merely collecting dust.

Tested on alpha by: jlemon
Partially submitted by: jlemon
Reviewed by: jlemon
MFC after: 3 weeks

Fix some memory bugs with regard to jumbo buffers. I made a mistake when
converting from the old external mbuf buffer code to the new (with the
MEXTADD() macro). Also free free list memory correctly in
foo_free_jumbo_mem() routines: grab the head of the list, then
remove it, _then_ free() it.

This fixes the memory corruption problem I've been chasing in the level 1
driver.

Turn TCP and UDP hardware RX checksumming back on. jlemon pointed out where
I'd gone wrong before: we have to set csum_data to 0xffff, not 0.

Use LGE_INC() macro to increment tx producer index in lge_encap().
Disable the extra TCP/UCP checksum checking in lge_rxeof() since it
doesn't appear to actually work as advertised.

In lge_detach(), don't contigfree() the jumbogram buffer memory;
lge_free_jumbo_mem() does it for us.

Add device driver support for the Level 1 LXT1001 NetCellerator
gigabit ethernet controller chip. This device is used on some
fiber optic gigE cards from SMC, D-Link and Addtron. Jumbograms and
TCP/IP checksum offload on receive are supported. Hardware VLAN
filtering is not, because it doesn't play well with our existing
VLAN code. Also add manual page.

There is a 4.x version of this driver available at
http://www.freebsd.org/~wpaul/Level1/4.x if anyone feels adventurous
and wants to test it. I still need to do performance testing and
tuning with this device.

(For my next trick, I will make the 3Com 3cR990 sit up and beg.)